diff options
Diffstat (limited to '1.4.23-rc4/configs/mgcp.conf.sample')
| -rw-r--r-- | 1.4.23-rc4/configs/mgcp.conf.sample | 104 |
1 files changed, 0 insertions, 104 deletions
diff --git a/1.4.23-rc4/configs/mgcp.conf.sample b/1.4.23-rc4/configs/mgcp.conf.sample deleted file mode 100644 index 288065355..000000000 --- a/1.4.23-rc4/configs/mgcp.conf.sample +++ /dev/null @@ -1,104 +0,0 @@ -; -; MGCP Configuration for Asterisk -; -[general] -;port = 2427 -;bindaddr = 0.0.0.0 - -;------------------------------ JITTER BUFFER CONFIGURATION -------------------------- -; jbenable = yes ; Enables the use of a jitterbuffer on the receiving side of a - ; MGCP channel. Defaults to "no". An enabled jitterbuffer will - ; be used only if the sending side can create and the receiving - ; side can not accept jitter. The MGCP channel can accept jitter, - ; thus an enabled jitterbuffer on the receive MGCP side will only - ; be used if the sending side can create jitter and jbforce is - ; also set to yes. - -; jbforce = no ; Forces the use of a jitterbuffer on the receive side of a MGCP - ; channel. Defaults to "no". - -; jbmaxsize = 200 ; Max length of the jitterbuffer in milliseconds. - -; jbresyncthreshold = 1000 ; Jump in the frame timestamps over which the jitterbuffer is - ; resynchronized. Useful to improve the quality of the voice, with - ; big jumps in/broken timestamps, usually sent from exotic devices - ; and programs. Defaults to 1000. - -; jbimpl = fixed ; Jitterbuffer implementation, used on the receiving side of a MGCP - ; channel. Two implementations are currently available - "fixed" - ; (with size always equals to jbmax-size) and "adaptive" (with - ; variable size, actually the new jb of IAX2). Defaults to fixed. - -; jblog = no ; Enables jitterbuffer frame logging. Defaults to "no". -;----------------------------------------------------------------------------------- - -;[dlinkgw] -;host = 192.168.0.64 -;context = default -;canreinvite = no -;line => aaln/2 -;line => aaln/1 - -;; The MGCP channel supports the following service codes: -;; # - Transfer -;; *67 - Calling Number Delivery Blocking -;; *70 - Cancel Call Waiting -;; *72 - Call Forwarding Activation -;; *73 - Call Forwarding Deactivation -;; *78 - Do Not Disturb Activation -;; *79 - Do Not Disturb Deactivation -;; *8 - Call pick-up -; -; known to work with Swissvoice IP10s -;[192.168.1.20] -;context=local -;host=192.168.1.20 -;callerid = "John Doe" <123> -;callgroup=0 ; in the range from 0 to 63 -;pickupgroup=0 ; in the range from 0 to 63 -;nat=no -;threewaycalling=yes -;transfer=yes ; transfer requires threewaycalling=yes. Use FLASH to transfer -;callwaiting=yes ; this might be a cause of trouble for ip10s -;cancallforward=yes -;line => aaln/1 -; - -;[dph100] -; -; Supporting the DPH100M requires defining DLINK_BUGGY_FIRMWARE in -; chan_mgcp.c in addition to enabling the slowsequence mode due to -; bugs in the D-Link firmware -; -;context=local -;host=dynamic -;dtmfmode=none ; DTMF Mode can be 'none', 'rfc2833', or 'inband' or - ; 'hybrid' which starts in none and moves to inband. Default is none. -;slowsequence=yes ; The DPH100M does not follow MGCP standards for sequencing -;line => aaln/1 - -; known to work with wave7optics FTTH LMGs -;[192.168.1.20] -;accountcode = 1000 ; record this in cdr as account identification for billing -;amaflags = billing ; record this in cdr as flagged for 'billing', - ; 'documentation', or 'omit' -;context = local -;host = 192.168.1.20 -;wcardep = aaln/* ; enables wildcard endpoint and sets it to 'aaln/*' - ; another common format is '*' -;callerid = "Duane Cox" <123> ; now lets setup line 1 using per endpoint configuration... -;callwaiting = no -;callreturn = yes -;cancallforward = yes -;canreinvite = no -;transfer = no -;dtmfmode = inband -;line => aaln/1 ; now lets save this config to line1 aka aaln/1 -;callerid = "Duane Cox" <456> ; now lets setup line 2 -;callwaiting = no -;callreturn = yes -;cancallforward = yes -;canreinvite = no -;transfer = no -;dtmfmode = inband -;line => aaln/2 ; now lets save this config to line2 aka aaln/2 |