diff options
Diffstat (limited to '1.2-netsec/include/asterisk/module.h')
-rw-r--r-- | 1.2-netsec/include/asterisk/module.h | 419 |
1 files changed, 419 insertions, 0 deletions
diff --git a/1.2-netsec/include/asterisk/module.h b/1.2-netsec/include/asterisk/module.h new file mode 100644 index 000000000..afb90ce24 --- /dev/null +++ b/1.2-netsec/include/asterisk/module.h @@ -0,0 +1,419 @@ +/* + * Asterisk -- An open source telephony toolkit. + * + * Copyright (C) 1999 - 2005, Digium, Inc. + * + * Mark Spencer <markster@digium.com> + * + * See http://www.asterisk.org for more information about + * the Asterisk project. Please do not directly contact + * any of the maintainers of this project for assistance; + * the project provides a web site, mailing lists and IRC + * channels for your use. + * + * This program is free software, distributed under the terms of + * the GNU General Public License Version 2. See the LICENSE file + * at the top of the source tree. + */ + +/*! \file + * \brief Asterisk module definitions. + * + * This file contains the definitons for functions Asterisk modules should + * provide and some other module related functions. + */ + +#ifndef _ASTERISK_MODULE_H +#define _ASTERISK_MODULE_H + +#if defined(__cplusplus) || defined(c_plusplus) +extern "C" { +#endif + +/* Every module should provide these functions */ + +/*! + * \brief Initialize the module. + * + * This function is called at module load time. Put all code in here + * that needs to set up your module's hardware, software, registrations, + * etc. + * + * \return This function should return 0 on success and non-zero on failure. + * If the module is not loaded successfully, Asterisk will call its + * unload_module() function. + */ +int load_module(void); + +/*! + * \brief Cleanup all module structures, sockets, etc. + * + * This is called at exit. Any registrations and memory allocations need to be + * unregistered and free'd here. Nothing else will do these for you (until + * exit). + * + * \return Zero on success, or non-zero on error. + */ +int unload_module(void); + +/*! + * \brief Provides a usecount. + * + * This function will be called by various parts of asterisk. Basically, all + * it has to do is to return a usecount when called. You will need to maintain + * your usecount within the module somewhere. The usecount should be how many + * channels provided by this module are in use. + * + * \return The module's usecount. + */ +int usecount(void); /* How many channels provided by this module are in use? */ + +/*! \brief Provides a description of the module. + * + * \return a short description of your module + */ +char *description(void); /* Description of this module */ + +/*! + * \brief Returns the ASTERISK_GPL_KEY + * + * This returns the ASTERISK_GPL_KEY, signifiying that you agree to the terms of + * the GPL stated in the ASTERISK_GPL_KEY. Your module will not load if it does + * not return the EXACT message: + * + * \code + * char *key(void) { + * return ASTERISK_GPL_KEY; + * } + * \endcode + * + * \return ASTERISK_GPL_KEY + */ +char *key(void); /* Return the below mentioned key, unmodified */ + +/*! + * \brief Reload stuff. + * + * This function is where any reload routines take place. Re-read config files, + * change signalling, whatever is appropriate on a reload. + * + * \return The return value is not used. + */ +int reload(void); /* reload configs */ + +/*! \brief The text the key() function should return. */ +#define ASTERISK_GPL_KEY \ + "This paragraph is Copyright (C) 2000, Linux Support Services, Inc. \ +In order for your module to load, it must return this key via a function \ +called \"key\". Any code which includes this paragraph must be licensed under \ +the GNU General Public License version 2 or later (at your option). Linux \ +Support Services, Inc. reserves the right to allow other parties to license \ +this paragraph under other terms as well." + +#define AST_MODULE_CONFIG "modules.conf" /*!< \brief Module configuration file */ + +/*! + * \brief Softly unload a module. + * + * This flag signals ast_unload_resource() to unload a module only if it is not + * in use, according to the module's usecount. + */ +#define AST_FORCE_SOFT 0 + +/*! + * \brief Firmly unload a module. + * + * This flag signals ast_unload_resource() to attempt to unload a module even + * if it is in use. It will attempt to use the module's unload_module + * function. + */ +#define AST_FORCE_FIRM 1 + +/*! + * \brief Unconditionally unload a module. + * + * This flag signals ast_unload_resource() to first attempt to unload a module + * using the module's unload_module function, then if that fails to unload the + * module using dlclose. The module will be unloaded even if it is still in + * use. Use of this flag is not recommended. + */ +#define AST_FORCE_HARD 2 + +/*! + * \brief Load a module. + * \param resource_name The filename of the module to load. + * + * This function is run by the PBX to load the modules. It performs + * all loading and initilization tasks. Basically, to load a module, just + * give it the name of the module and it will do the rest. + * + * \return Zero on success, -1 on error. + */ +int ast_load_resource(const char *resource_name); + +/*! + * \brief Unloads a module. + * \param resource_name The name of the module to unload. + * \param force The force flag. This should be set using one of the AST_FORCE* + * flags. + * + * This function unloads a module. It will only unload modules that are not in + * use (usecount not zero), unless #AST_FORCE_FIRM or #AST_FORCE_HARD is + * specified. Setting #AST_FORCE_FIRM or #AST_FORCE_HARD will unload the + * module regardless of consequences (NOT_RECOMMENDED). + * + * \return Zero on success, -1 on error. + */ +int ast_unload_resource(const char *resource_name, int force); + +/*! + * \brief Notify when usecount has been changed. + * + * This function calulates use counts and notifies anyone trying to keep track + * of them. It should be called whenever your module's usecount changes. + * + * \note The LOCAL_USER macros take care of calling this function for you. + */ +void ast_update_use_count(void); + +/*! + * \brief Ask for a list of modules, descriptions, and use counts. + * \param modentry A callback to an updater function. + * \param like + * + * For each of the modules loaded, modentry will be executed with the resource, + * description, and usecount values of each particular module. + * + * \return the number of modules loaded + */ +int ast_update_module_list(int (*modentry)(const char *module, const char *description, int usecnt, const char *like), + const char *like); + +/*! + * \brief Add a procedure to be run when modules have been updated. + * \param updater The function to run when modules have been updated. + * + * This function adds the given function to a linked list of functions to be + * run when the modules are updated. + * + * \return Zero on success and -1 on failure. + */ +int ast_loader_register(int (*updater)(void)); + +/*! + * \brief Remove a procedure to be run when modules are updated. + * \param updater The updater function to unregister. + * + * This removes the given function from the updater list. + * + * \return Zero on success, -1 on failure. + */ +int ast_loader_unregister(int (*updater)(void)); + +/*! + * \brief Reload asterisk modules. + * \param name the name of the module to reload + * + * This function reloads the specified module, or if no modules are specified, + * it will reload all loaded modules. + * + * \note Modules are reloaded using their reload() functions, not unloading + * them and loading them again. + * + * \return Zero if the specified module was not found, 1 if the module was + * found but cannot be reloaded, -1 if a reload operation is already in + * progress, and 2 if the specfied module was found and reloaded. + */ +int ast_module_reload(const char *name); + +/*! + * \brief Match modules names for the Asterisk cli. + * \param line Unused by this function, but this should be the line we are + * matching. + * \param word The partial name to match. + * \param pos The position the word we are completing is in. + * \param state The possible match to return. + * \param rpos The position we should be matching. This should be the same as + * pos. + * \param needsreload This should be 1 if we need to reload this module and 0 + * otherwise. This function will only return modules that are reloadble + * if this is 1. + * + * \return A possible completion of the partial match, or NULL if no matches + * were found. + */ +char *ast_module_helper(char *line, char *word, int pos, int state, int rpos, int needsreload); + +/*! + * \brief Register a function to be executed before Asterisk exits. + * \param func The callback function to use. + * + * \return Zero on success, -1 on error. + */ +int ast_register_atexit(void (*func)(void)); + +/*! + * \brief Unregister a function registered with ast_register_atexit(). + * \param func The callback function to unregister. + */ +void ast_unregister_atexit(void (*func)(void)); + +/* Local user routines keep track of which channels are using a given module + resource. They can help make removing modules safer, particularly if + they're in use at the time they have been requested to be removed */ + +/*! + * \brief Standard localuser struct definition. + * + * This macro defines a localuser struct. The channel.h file must be included + * to use this macro because it refrences ast_channel. + */ +#define STANDARD_LOCAL_USER struct localuser { \ + struct ast_channel *chan; \ + struct localuser *next; \ + } + +/*! + * \brief The localuser declaration. + * + * This macro should be used in combination with #STANDARD_LOCAL_USER. It + * creates a localuser mutex and several other variables used for keeping the + * use count. + * + * <b>Sample Usage:</b> + * \code + * STANDARD_LOCAL_USER; + * LOCAL_USER_DECL; + * \endcode + */ +#define LOCAL_USER_DECL AST_MUTEX_DEFINE_STATIC(localuser_lock); \ + static struct localuser *localusers = NULL; \ + static int localusecnt = 0; + +#define STANDARD_INCREMENT_USECOUNT \ + ast_mutex_lock(&localuser_lock); \ + localusecnt++; \ + ast_mutex_unlock(&localuser_lock); \ + ast_update_use_count(); + +#define STANDARD_DECREMENT_USECOUNT \ + ast_mutex_lock(&localuser_lock); \ + localusecnt--; \ + ast_mutex_unlock(&localuser_lock); \ + ast_update_use_count(); + +/*! + * \brief Add a localuser. + * \param u a pointer to a localuser struct + * + * This macro adds a localuser to the list of users and increments the + * usecount. It expects a variable named \p chan of type \p ast_channel in the + * current scope. + * + * \note This function dynamically allocates memory. If this operation fails + * it will cause your function to return -1 to the caller. + */ +#define LOCAL_USER_ADD(u) { \ + \ + if (!(u=calloc(1,sizeof(*u)))) { \ + ast_log(LOG_WARNING, "Out of memory\n"); \ + return -1; \ + } \ + ast_mutex_lock(&localuser_lock); \ + u->chan = chan; \ + u->next = localusers; \ + localusers = u; \ + localusecnt++; \ + ast_mutex_unlock(&localuser_lock); \ + ast_update_use_count(); \ +} + +#define LOCAL_USER_ACF_ADD(u) { \ + \ + if (!(u=calloc(1,sizeof(*u)))) { \ + ast_log(LOG_WARNING, "Out of memory\n"); \ + return ""; \ + } \ + ast_mutex_lock(&localuser_lock); \ + u->chan = chan; \ + u->next = localusers; \ + localusers = u; \ + localusecnt++; \ + ast_mutex_unlock(&localuser_lock); \ + ast_update_use_count(); \ +} + +/*! + * \brief Remove a localuser. + * \param u the user to add, should be of type struct localuser + * + * This macro removes a localuser from the list of users and decrements the + * usecount. + */ +#define LOCAL_USER_REMOVE(u) { \ + struct localuser *uc, *ul = NULL; \ + ast_mutex_lock(&localuser_lock); \ + uc = localusers; \ + while (uc) { \ + if (uc == u) { \ + if (ul) \ + ul->next = uc->next; \ + else \ + localusers = uc->next; \ + break; \ + } \ + ul = uc; \ + uc = uc->next; \ + }\ + free(u); \ + localusecnt--; \ + ast_mutex_unlock(&localuser_lock); \ + ast_update_use_count(); \ +} + +/*! + * \brief Hangup all localusers. + * + * This macro hangs up on all current localusers and sets the usecount to zero + * when finished. + */ +#define STANDARD_HANGUP_LOCALUSERS { \ + struct localuser *u, *ul; \ + ast_mutex_lock(&localuser_lock); \ + u = localusers; \ + while(u) { \ + ast_softhangup(u->chan, AST_SOFTHANGUP_APPUNLOAD); \ + ul = u; \ + u = u->next; \ + free(ul); \ + } \ + localusecnt=0; \ + ast_mutex_unlock(&localuser_lock); \ + ast_update_use_count(); \ +} + +/*! + * \brief Set the specfied integer to the current usecount. + * \param res the integer variable to set. + * + * This macro sets the specfied integer variable to the local usecount. + * + * <b>Sample Usage:</b> + * \code + * int usecount(void) + * { + * int res; + * STANDARD_USECOUNT(res); + * return res; + * } + * \endcode + */ +#define STANDARD_USECOUNT(res) { \ + res = localusecnt; \ +} + +#if defined(__cplusplus) || defined(c_plusplus) +} +#endif + +#endif /* _ASTERISK_MODULE_H */ |