diff options
Diffstat (limited to '1.2-netsec/doc/app_sms.html')
-rw-r--r-- | 1.2-netsec/doc/app_sms.html | 834 |
1 files changed, 0 insertions, 834 deletions
diff --git a/1.2-netsec/doc/app_sms.html b/1.2-netsec/doc/app_sms.html deleted file mode 100644 index 2a076b38b..000000000 --- a/1.2-netsec/doc/app_sms.html +++ /dev/null @@ -1,834 +0,0 @@ -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> -<html> -<head> -</head> -<body> -<h1>* Application SMS</h1> -The SMS module for asterisk was developed by Adrian Kennard, and is an -implementation of the ETSI specification for landline SMS, ETSI ES 201 -912, which is available from www.etsi.org. Landline SMS is starting to -be available in various parts of Europe, and is available from BT in -the UK. However, asterisk would allow gateways to be created in other -locations such as the US, and use of SMS capable phones such as the -Magic Messenger. SMS works using analogue or ISDN lines.<br> -<h2>Background</h2> -Short Message Service (SMS), or <span style="font-style: italic;">texting</span> -is very popular between mobile phones. A message can be sent between -two phones, and normally contains 160 characters. There are ways in -which various types of data can be encoded in a text message such as -ring tones, and small graphic, etc. Text messaging is being used for -voting and competitions, and also SPAM...<br> -<br> -Sending a message involves the mobile phone contacting a message centre -(SMSC) and passing the message to it. The message centre then contacts -the destination mobile to deliver the message. The SMSC is responsible -for storing the message and trying to send it until the destination -mobile is available, or a timeout.<br> -<br> -Landline SMS works in basically the same way. You would normally have a -suitable text capable landline phone, or a separate texting box such as -a Magic Messenger on your phone line. This sends a message to a message -centre your telco provides by making a normal call and sending the data -using 1200 Baud FSK signaling according to the ETSI spec. To receive a -message the message centre calls the line with a specific calling -number, and the text capable phone answers the call and receives the -data using 1200 Baud FSK signaling. This works particularly well in the -UK as the calling line identity is sent before the first ring, so no -phones in the house would ring when a message arrives.<br> -<h2>Typical use with asterisk</h2> -Sending messages from an asterisk box can be used for a variety of -reasons, including notification from any monitoring systems, email -subject lines, etc.<br> -Receiving messages to an asterisk box is typically used just to email -the messages to someone appropriate - we email and texts that are -received to our direct numbers to the appropriate person. Received -messages could also be used to control applications, manage -competitions, votes, post items to IRC, anything.<br> -Using a terminal such as a magic messenger, an asterisk box could ask -as a message centre sending messages to the terminal, which will beep -and pop up the message (and remember 100 or so messages in its memory).<br> -<h2>Terminology</h2> -<table style="text-align: left;" border="1" cellpadding="2" - cellspacing="2"> - <tbody> - <tr> - <td style="vertical-align: top;">SMS<br> - </td> - <td style="vertical-align: top;">Short Message Service<br> - </td> - <td style="vertical-align: top;">i.e. text messages<br> - </td> - </tr> - <tr> - <td style="vertical-align: top;">SMSC<br> - </td> - <td style="vertical-align: top;">Short Message Service Centre<br> - </td> - <td style="vertical-align: top;">The system responsible for -storing and forwarding messages<br> - </td> - </tr> - <tr> - <td style="vertical-align: top;">MO<br> - </td> - <td style="vertical-align: top;">Mobile Originated<br> - </td> - <td style="vertical-align: top;">A message on its way from a -mobile or landline device to the SMSC<br> - </td> - </tr> - <tr> - <td style="vertical-align: top;">MT<br> - </td> - <td style="vertical-align: top;">Mobile Terminated<br> - </td> - <td style="vertical-align: top;">A message on its way from the -SMSC to the mobile or landline device<br> - </td> - </tr> - <tr> - <td style="vertical-align: top;">RX<br> - </td> - <td style="vertical-align: top;">Receive<br> - </td> - <td style="vertical-align: top;">A message coming in to the -asterisk box<br> - </td> - </tr> - <tr> - <td style="vertical-align: top;">TX<br> - </td> - <td style="vertical-align: top;">Transmit<br> - </td> - <td style="vertical-align: top;">A message going out of the -asterisk box<br> - </td> - </tr> - </tbody> -</table> -<h2>Sub address</h2> -When sending a message to a landline, you simply send to the landline -number. In the UK, all of the mobile operators (bar one) understand -sending messages to landlines and pass the messages to the BTText -system for delivery to the landline.<br> -<br> -The specification for landline SMS allows for the possibility of more -than one device on a single landline. These can be configured with <span - style="font-style: italic;">Sub addresses</span> which are a single -digit. To send a message to a specific device the message is sent to -the landline number with an extra digit appended to the end. The telco -can define a default sub address (9 in the UK) which is used when the -extra digit is not appended to the end. When the call comes in, part of -the calling line ID is the sub address, so that only one device on the -line answers the call and receives the message.<br> -<br> -Sub addresses also work for outgoing messages. Part of the number -called by the device to send a message is its sub address. Sending from -the default sub address (9 in the UK) means the message is delivered -with the <span style="font-style: italic;">sender </span>being the -normal landline number. Sending from any other sub address makes the <span - style="font-style: italic;">sender</span> the landline number with an -extra digit on the end.<br> -<br> -Using asterisk, you can make use of the sub addresses for sending and -receiving messages. Using DDI (DID, i.e. multiple numbers on the line -on ISDN) you can also make use of many different numbers for SMS.<br> -<h2>Build / installation</h2> -<span style="font-weight: bold;">app_sms.c</span> is included in the -latest cvs. It lives in the asterisk source <span - style="font-weight: bold;">apps</span> directory and is included in -the object list (<span style="font-weight: bold;">app_sms.so</span>) in -<span style="font-weight: bold;">apps/Makefile</span>.<br> -<span style="font-weight: bold;">smsq.c</span> is a stand alone helper -application which is used to send SMSs from the command line. It uses -the <span style="font-weight: bold;">popt</span> library. A line for -your make file is:-<br> -<pre>smsq: smsq.c<br> cc -O -o smsq smsq.c -lpopt<br></pre> -<span style="font-family: monospace;"></span> -<h2>extensions.conf</h2> -The following contexts are recommended.<br> -<pre>; Mobile Terminated, RX. This is used when an incoming call from the SMS arrives, with the queue (called number and sub address) in ${EXTEN}<br>; Running an app after receipt of the text allows the app to find all messages in the queue and handle them, e.g. email them.<br>; The app may be something like smsq --process=somecommand --queue=${EXTEN} to run a command for each received message<br>; See below for usage<br>[smsmtrx]<br>exten = _X.,1, SMS(${EXTEN}|a)<br>exten = _X.,2,System("someapptohandleincomingsms ${EXTEN}")<br>exten = _X.,3,Hangup<br><br>; Mobile originated, RX. This is receiving a message from a device, e.g. a Magic Messenger on a sip extension<br>; Running an app after receipt of the text allows the app to find all messages in the queue and handle then, e.g. sending them to the public SMSC<br>; The app may be something like smsq --process=somecommand --queue=${EXTEN} to run a command for each received message<br>; See below for example usage<br>[smsmorx]<br>exten = _X.,1, SMS(${EXTEN}|sa)<br>exten = _X.,2,System("someapptohandlelocalsms ${EXTEN}")<br>exten = _X.,3,Hangup<span - style="font-family: sans-serif;"></span><span - style="font-family: sans-serif;"></span></pre> -<span style="font-family: sans-serif;"></span><span - style="font-weight: bold;">smsmtrx</span> is normally accessed by an -incoming call from the SMSC. In the UK this call is from a CLI of -080058752X0 where X is the sub address. As such a typical usage in the -extensions.conf at the point of handling an incoming call is:-<br> -<pre>exten = _X./8005875290,1,Goto(smsmtrx,${EXTEN},1)<br>exten = _X./_80058752[0-8]0,1,Goto(smsmtrx,${EXTEN}-${CALLERIDNUM:8:1},1)<br></pre> -Alternatively, if you have the correct national prefix on incoming CLI, -e.g. using zaphfc, you might use:-<br> -<pre>exten = _X./08005875290,1,Goto(smsmtrx,${EXTEN},1)<br>exten = _X./_080058752[0-8]0,1,Goto(smsmtrx,${EXTEN}-${CALLERIDNUM:9:1},1)</pre> -<span style="font-weight: bold;">smsmorx</span> is normally accessed by -a call from a local sip device connected to a Magic Messenger. It could -however by that you are operating asterisk as a message centre for -calls from outside. Either way, you look at the called number and goto -smsmorx. In the UK, the SMSC number that would be dialed is 1709400X -where X is the caller sub address. As such typical usage in -extension.config at the point of handling a call from a sip phone is:-<br> -<pre>exten = 17094009,1,Goto(smsmorx,${CALLERIDNUM},1)<br>exten = _1709400[0-8],1,Goto(smsmorx,${CALLERIDNUM}-{EXTEN:7:1},1)<br></pre> -<h2>Using smsq</h2> -<span style="font-weight: bold;">smsq</span> is a simple helper -application designed to make it easy to send messages from a command -line. it is intended to run on the asterisk box and have direct access -to the queue directories for SMS and for asterisk.<br> -<br> -In its simplest form you can send an SMS by a command such as <br> -<br> -smsq 0123456789 This is a test to 0123456789<br> -<br> -This would create a queue file for a mobile originated TX message in -queue 0 to send the text "This is a test to 0123456789" to 0123456789. -It would then place a file in the /var/spool/asterisk/outgoing -directory to initiate a call to 17094009 (the default message centre in -smsq) attached to application SMS with argument of the queue name (0).<br> -<br> -Normally smsq will queue a message ready to send, and will then create -a file in the asterisk outgoing directory causing asterisk to actually -connect to the message centre or device and actually send the pending -message(s).<br> -<br> -Using --process, smsq can however be used on received queues to run a -command for each file (matching the queue if specified) with various -environment variables set based on the message (see below);<br> -<br> -smsq options:-<br> -<br> -<table style="text-align: left;" border="1" cellpadding="2" - cellspacing="2"> - <tbody> - <tr> - <td style="vertical-align: top;">--help</td> - <td style="vertical-align: top;"><br> - </td> - <td style="vertical-align: top;">Show help text<br> - </td> - </tr> - <tr> - <td style="vertical-align: top;">--usage<br> - </td> - <td style="vertical-align: top;"><br> - </td> - <td style="vertical-align: top;">Show usage<br> - </td> - </tr> - <tr> - <td style="vertical-align: top;">--queue<br> - </td> - <td style="vertical-align: top;">-q<br> - </td> - <td style="vertical-align: top;">Specify a specific queue<br> -In no specified, messages are queued under queue "0"<br> - </td> - </tr> - <tr> - <td style="vertical-align: top;">--da<br> - </td> - <td style="vertical-align: top;">-d<br> - </td> - <td style="vertical-align: top;">Specify destination address<br> - </td> - </tr> - <tr> - <td style="vertical-align: top;">--oa<br> - </td> - <td style="vertical-align: top;">-o<br> - </td> - <td style="vertical-align: top;">Specify originating address<br> -This also implies that we are generating a mobile terminated message<br> - </td> - </tr> - <tr> - <td style="vertical-align: top;">--ud<br> - </td> - <td style="vertical-align: top;">-m<br> - </td> - <td style="vertical-align: top;">Specify the actual message<br> - </td> - </tr> - <tr> - <td style="vertical-align: top;">--ud-file<br> - </td> - <td style="vertical-align: top;">-f<br> - </td> - <td style="vertical-align: top;">Specify a file to be read for -the context of the message<br> -A blank filename (e.g. --ud-file= on its own) means read stdin. Very -useful when using via ssh where command line parsing could mess up the -message.<br> - </td> - </tr> - <tr> - <td style="vertical-align: top;">--mt<br> - </td> - <td style="vertical-align: top;">-t<br> - </td> - <td style="vertical-align: top;">Mobile terminated message to be -generated<br> - </td> - </tr> - <tr> - <td style="vertical-align: top;">--mo<br> - </td> - <td style="vertical-align: top;"><br> - </td> - <td style="vertical-align: top;">Mobile originated message to be -generated<br> -Default<br> - </td> - </tr> - <tr> - <td style="vertical-align: top;">--tx<br> - </td> - <td style="vertical-align: top;"><br> - </td> - <td style="vertical-align: top;">Transmit message<br> -Default<br> - </td> - </tr> - <tr> - <td style="vertical-align: top;">--rx<br> - </td> - <td style="vertical-align: top;">-r<br> - </td> - <td style="vertical-align: top;">Generate a message in the -receive queue<br> - </td> - </tr> - <tr> - <td style="vertical-align: top;">--UTF-8<br> - </td> - <td style="vertical-align: top;"><br> - </td> - <td style="vertical-align: top;">Treat the file as UTF-8 encoded -(default) </td> - </tr> - <tr> - <td style="vertical-align: top;">--UCS-1<br> - </td> - <td style="vertical-align: top;"><br> - </td> - <td style="vertical-align: top;">Treat the file as raw 8 bit -UCS-1 data, not UTF-8 encoded<br> - </td> - </tr> - <tr> - <td style="vertical-align: top;">--UCS-2<br> - </td> - <td style="vertical-align: top;"><br> - </td> - <td style="vertical-align: top;">Treat the file as raw 16 bit -bigendian USC-2 data<br> - </td> - </tr> - <tr> - <td style="vertical-align: top;">--process<br> - </td> - <td style="vertical-align: top;"><br> - </td> - <td style="vertical-align: top;">Specific a command to process -for each file in the queue<br> -Implies --rx and --mt if not otherwise specified.<br> -Sets environment variables for every possible variable, -and also ud, ud8 (USC-1 hex), and ud16 (USC-2 hex) for each call. -Removes files.<br> - </td> - </tr> - <tr> - <td style="vertical-align: top;">--motx-channel<br> - </td> - <td style="vertical-align: top;"><br> - </td> - <td style="vertical-align: top;">Specify the channel for motx -calls<br> -May contain X to use sub address based on queue name or may be full -number<br> -Default is Local/1709400X<br> - </td> - </tr> - <tr> - <td style="vertical-align: top;">--motx-callerid<br> - </td> - <td style="vertical-align: top;"><br> - </td> - <td style="vertical-align: top;">Specify the caller ID for motx -calls<br> -The default is the queue name without -X suffix<br> - </td> - </tr> - <tr> - <td style="vertical-align: top;">--motx-wait<br> - </td> - <td style="vertical-align: top;"><br> - </td> - <td style="vertical-align: top;">Wait time for motx call<br> -Default 10<br> - </td> - </tr> - <tr> - <td style="vertical-align: top;">--motx-delay<br> - </td> - <td style="vertical-align: top;"><br> - </td> - <td style="vertical-align: top;">Retry time for motx call<br> -Default 1<br> - </td> - </tr> - <tr> - <td style="vertical-align: top;">--motx-retries<br> - </td> - <td style="vertical-align: top;"><br> - </td> - <td style="vertical-align: top;">Retries for motx call<br> -Default 10<br> - </td> - </tr> - <tr> - <td style="vertical-align: top;">--mttx-channel<br> - </td> - <td style="vertical-align: top;"><br> - </td> - <td style="vertical-align: top;">Specify the channel for mttx -calls<br> -Default is Local/ and the queue name without -X suffix<br> - </td> - </tr> - <tr> - <td style="vertical-align: top;">--mtttx-callerid<br> - </td> - <td style="vertical-align: top;"><br> - </td> - <td style="vertical-align: top;">Specify the callerid for mttx -calls<br> -May include X to use sub address based on queue name or may be full -number<br> -Default is 080058752X0<br> - </td> - </tr> - <tr> - <td style="vertical-align: top;">--mttx-wait<br> - </td> - <td style="vertical-align: top;"><br> - </td> - <td style="vertical-align: top;">Wait time for mttx call<br> -Default 10<br> - </td> - </tr> - <tr> - <td style="vertical-align: top;">--mttx-delay<br> - </td> - <td style="vertical-align: top;"><br> - </td> - <td style="vertical-align: top;">Retry time for mttx call<br> -Default 30<br> - </td> - </tr> - <tr> - <td style="vertical-align: top;">--mttx-retries<br> - </td> - <td style="vertical-align: top;"><br> - </td> - <td style="vertical-align: top;">Retries for mttx call<br> -Default 100<br> - </td> - </tr> - <tr> - <td style="vertical-align: top;">--default-sub-address<br> - </td> - <td style="vertical-align: top;"><br> - </td> - <td style="vertical-align: top;">The default sub address assumed -(e.g. for X in CLI and dialled numbers as above) when none added (-X) -to queue<br> -Default 9<br> - </td> - </tr> - <tr> - <td style="vertical-align: top;">--no-dial<br> - </td> - <td style="vertical-align: top;">-x<br> - </td> - <td style="vertical-align: top;">Create queue, but do not dial to -send message<br> - </td> - </tr> - <tr> - <td style="vertical-align: top;">--no-wait<br> - </td> - <td style="vertical-align: top;"><br> - </td> - <td style="vertical-align: top;">Do not wait if a call appears to -be in progress<br> -This could have a small window where a mesdsage is queued but not sent, -so regular calls to smsq should be done to pick up any missed messages<br> - </td> - </tr> - <tr> - <td style="vertical-align: top;">--concurrent<br> - </td> - <td style="vertical-align: top;"><br> - </td> - <td style="vertical-align: top;">How many concurrent calls to -allow (per queue), default 1<br> - </td> - </tr> - <tr> - <td style="vertical-align: top;">--mr<br> - </td> - <td style="vertical-align: top;">-n<br> - </td> - <td style="vertical-align: top;">Message reference<br> - </td> - </tr> - <tr> - <td style="vertical-align: top;">--pid<br> - </td> - <td style="vertical-align: top;">-p<br> - </td> - <td style="vertical-align: top;">Protocol ID<br> - </td> - </tr> - <tr> - <td style="vertical-align: top;">--dcs<br> - </td> - <td style="vertical-align: top;"><br> - </td> - <td style="vertical-align: top;">Data coding scheme<br> - </td> - </tr> - <tr> - <td style="vertical-align: top;">--udh<br> - </td> - <td style="vertical-align: top;"><br> - </td> - <td style="vertical-align: top;">Specific hex string of user data -header specified (not including the initial length byte)<br> -May be a blank string to indicate header is included in the user data -already but user data header indication to be set.<br> - </td> - </tr> - <tr> - <td style="vertical-align: top;">--srr<br> - </td> - <td style="vertical-align: top;"><br> - </td> - <td style="vertical-align: top;">Status report requested<br> - </td> - </tr> - <tr> - <td style="vertical-align: top;">--rp<br> - </td> - <td style="vertical-align: top;"><br> - </td> - <td style="vertical-align: top;">Return path requested<br> - </td> - </tr> - <tr> - <td style="vertical-align: top;">--vp<br> - </td> - <td style="vertical-align: top;"><br> - </td> - <td style="vertical-align: top;">Specify validity period (seconds)<br> - </td> - </tr> - <tr> - <td style="vertical-align: top;">--scts<br> - </td> - <td style="vertical-align: top;"><br> - </td> - <td style="vertical-align: top;">Specify timestamp -(YYYY-MM-DDTHH:MM:SS)<br> - </td> - </tr> - <tr> - <td style="vertical-align: top;">--spool-dir<br> - </td> - <td style="vertical-align: top;"><br> - </td> - <td style="vertical-align: top;">Spool dir (in which sms and -outgoing are found)<br> -Default /var/spool/asterisk<br> - </td> - </tr> - </tbody> -</table> -<p>Other arguments starting '-' or '--' are invalid and will cause an -error. Any trailing arguments are processed as follows:-<br> -</p> -<ul> - <li>If the message is mobile originating and no destination address -has been specified, then the first argument is assumed to be a -destination address</li> - <li>If the message is mobile terminating and no destination address -has been specified, then the first argument is assumed to be the queue -name</li> - <li>If there is no user data, or user data file specified, then any -following arguments are assumed to be the message, which are -concatenated.</li> - <li>If no user data is specified, then no message is sent. However, -unless --no-dial is specified, smsq checks for pending messages and -generates an outgoing anyway</li> -</ul> -Note that when smsq attempts to make a file in -/var/spool/asterisk/outgoing, it checks if there is already a call -queued for that queue. It will try several filenames, up to the ---concorrent setting. If these files -exists, then this means asterisk is already queued to send all messages -for that queue, and so asterisk should pick up the message just queued. -However, this alone could create a race condition, so if the files -exist then smsq will wait up to 3 seconds to confirm it still exists or -if the queued messages have been sent already. -The --no-wait turns off this behaviour. Basically, this means that if -you have a lot of messages to send all at -once, asterisk will not make unlimited concurrent calls to the same -message centre or device for the same queue. This is because it is -generally more efficient to make one call and send all of the messages -one after the other.<br> -<br> -smsq can be used with no arguments, or with a queue name only, and it -will check for any pending messages and cause an outgoing if there are -any. It only sets up one outgoing call at a time based on the first -queued message it finds. A outgoing call will normally send all queued -messages for that queue. One way to use smsq would be to run with no -queue name (so any queue) every minute or every few seconds to send -pending message. This is not normally necessary unless --no-dial is -selected. Note that smsq does only check motx or mttx depending on the -options selected, so it would need to be called twice as a general -check.<br> -<br> -UTF-8 is used to parse command line arguments for user data, and is the -default when reading a file. If an invalid UTF-8 sequence is found, it -is treated as UCS-1 data (i.e, as is).<br> -<br> -The --process option causes smsq to scan the specified queue (default -is mtrx) for messages (matching the queue specified, or any if queue -not specified) and run a command and delete the file. The command is -run with a number of environment variables set as follows. Note that -these are unset if not needed and not just taken from the calling -environment. This allows simple processing of incoming messages<br> -<br> -<table style="text-align: left;" border="1" cellpadding="2" - cellspacing="2"> - <tbody> - <tr> - <td style="vertical-align: top;">$queue<br> - </td> - <td style="vertical-align: top;">Set if a queue specified<br> - </td> - </tr> - <tr> - <td style="vertical-align: top;">$?srr<br> - </td> - <td style="vertical-align: top;">srr is set (to blank) if srr -defined and has value 1.<br> - </td> - </tr> - <tr> - <td style="vertical-align: top;">$?rp<br> - </td> - <td style="vertical-align: top;">rp is set (to blank) if rp -defined and has value 1.<br> - </td> - </tr> - <tr> - <td style="vertical-align: top;">$ud<br> - </td> - <td style="vertical-align: top;">User data, UTF-8 encoding, -including any control characters, but with nulls stripped out<br> -Useful for the content of emails, for example, as it includes any -newlines, etc.<br> - </td> - </tr> - <tr> - <td style="vertical-align: top;">$ude<br> - </td> - <td style="vertical-align: top;">User data, escaped UTF-8, -including all characters, but control characters \n, \r, \t, \f, \xxx -and \ is escaped as \\<br> -Useful fGuaranteed one line printable text, so useful in Subject lines -of emails, etc<br> - </td> - </tr> - <tr> - <td style="vertical-align: top;">$ud8<br> - </td> - <td style="vertical-align: top;">Hex UCS-1 coding of user data (2 -hex digits per character)<br> -Present only if all user data is in range U+0000 to U+00FF<br> - </td> - </tr> - <tr> - <td style="vertical-align: top;">$ud16<br> - </td> - <td style="vertical-align: top;">Hex UCS-2 coding of user data (4 -hex digits per chartacter)<br> - </td> - </tr> - <tr> - <td style="vertical-align: top;"><span style="font-style: italic;">other</span><br> - </td> - <td style="vertical-align: top;">Other fields set using their -field name, e.g. mr, pid, dcs, etc. udh is a hex byte string<br> - </td> - </tr> - </tbody> -</table> -<h2>File formats</h2> -By default all queues are held in a director /var/spool/asterisk/sms. -Within this directory are sub directories mtrx, mttx, morx, motx which -hold the received messages and the messages ready to send. Also, -/var/log/asterisk/sms is a log file of all messages handled.<br> -<br> -The file name in each queue directory starts with the queue parameter -to SMS which is normally the CLI used for an outgoing message or the -called number on an incoming message, and may have -X (X being sub -address) appended. If no queue ID is known, then 0 is used by smsq by -default. After this is a dot, and then any text. Files are scanned for -matching queue ID and a dot at the start. This means temporary files -being created can be given a different name not starting with a queue -(we recommend a . on the start of the file name for temp files).<br> -<br> -Files in these queues are in the form of a simple text file where each -line starts with a keyword and an = and then data. udh and ud have -options for hex encoding, see below.<br> -<br> -UTF-8. The user data (ud) field is treated as being UTF-8 encoded -unless the DCS is specified indicating 8 bit formart. If 8 bit format -is specified then the user data is sent as is.<br> -<br> -The keywords are as -follows:-<br> -<table style="text-align: left;" border="1" cellpadding="2" - cellspacing="2"> - <tbody> - <tr> - <td style="vertical-align: top;">oa</td> - <td style="vertical-align: top;">Originating address<br> -The phone number from which the message came<br> -Present on mobile terminated messages and is the CLI for morx messages<br> - </td> - </tr> - <tr> - <td style="vertical-align: top;">da<br> - </td> - <td style="vertical-align: top;">Destination Address<br> -The phone number to which the message is sent<br> -Present on mobile originated messages<br> - </td> - </tr> - <tr> - <td style="vertical-align: top;">scts<br> - </td> - <td style="vertical-align: top;">The service centre time stamp<br> -Format YYYY-MM-DDTHH:MM:SS<br> -Present on mobile terminated messages<br> - </td> - </tr> - <tr> - <td style="vertical-align: top;">pid<br> - </td> - <td style="vertical-align: top;">One byte decimal protocol ID<br> -See GSM specs for more details<br> -Normally 0 or absent<br> - </td> - </tr> - <tr> - <td style="vertical-align: top;">dcs<br> - </td> - <td style="vertical-align: top;">One byte decimal data coding -scheme<br> -If omitted, a sensible default is used (see below)<br> -See GSM specs for more details<br> - </td> - </tr> - <tr> - <td style="vertical-align: top;">mr<br> - </td> - <td style="vertical-align: top;">One byte decimal message -reference<br> -Present on mobile originated messages, added by default if absent<br> - </td> - </tr> - <tr> - <td style="vertical-align: top;">srr<br> - </td> - <td style="vertical-align: top;">0 or 1 for status report request<br> -Does not work in UK yet, not implemented in app_sms yet<br> - </td> - </tr> - <tr> - <td style="vertical-align: top;">rp<br> - </td> - <td style="vertical-align: top;">0 or 1 return path<br> -See GSM specs for details<br> - </td> - </tr> - <tr> - <td style="vertical-align: top;">vp<br> - </td> - <td style="vertical-align: top;">Validity period in seconds<br> -Does not work in UK yet<br> - </td> - </tr> - <tr> - <td style="vertical-align: top;">udh<br> - </td> - <td style="vertical-align: top;">Hex string of user data header -prepended to the SMS contents, excluding initial length byte.<br> -Consistent with ud, this is specified as udh# rather than udh=<br> -If blank, this means that the udhi flag will be set but any user data -header must be in the ud field<br> - </td> - </tr> - <tr> - <td style="vertical-align: top;">ud<br> - </td> - <td style="vertical-align: top;">User data, may be text, or hex, -see below<br> - </td> - </tr> - </tbody> -</table> -<br> -udh is specified as as udh# followed by hex (2 hex digits per byte). If -present, then the user data header indicator bit is set, and the length -plus the user data header is added to the start of the user data, with -padding if necessary (to septet boundary in 7 bit format).<br> -<br> -User data can hold an USC character codes U+0000 to U+FFFF. Any other -characters are coded as U+FEFF<br> -ud can be specified as ud= followed by UTF-8 encoded text if it -contains no control characters, i.e. only (U+0020 to U+FFFF). Any -invalid UTF-8 sequences are treated as is (U+0080-U+00FF).<br> -ud can also be specified as ud# followed by hex (2 hex digits per byte) -containing characters U+0000 to U+00FF only.<br> -ud can also be specified as ud## followed by hex (4 hex digits per -byte) containing UCS-2 characters.<br> -When written by app_sms (e.g. incoming messages), the file is written -with ud= if it can be (no control characters). If it cannot, the a -comment line ;ud= is used to show the user data for human readability -and ud# or ud## is used.<br> -<h2>Delivery reports</h2> -The SMS specification allows for delivery reports. These are requested -using the srr bit. However, as these do not work in the UK yet they are -not fully implemented in this application. If anyone has a telco that -does implement these, please let me know. BT in the UK have a non -standard way to do this by starting the message with *0#, and so this -application may have a UK specific bodge in the near future to handle -these.<br> -<br> -The main changes that are proposed for delivery report handling are :-<br> -<ul> - <li>New queues for sent messages, one file for each destination -address and message reference.</li> - <li>New field in message format, user reference, allowing -applications to tie up their original message with a report.</li> - <li>Handling of the delivery confirmation/rejection and connecting to -the outgoing message - the received message file would then have fields -for the original outgoing message and user reference allowing -applications to handle confirmations better.<br> - </li> -</ul> -<br> -</body> -</html> |