1 files changed, 0 insertions, 92 deletions
diff --git a/1.2-netsec/configs/modem.conf.sample b/1.2-netsec/configs/modem.conf.sample
deleted file mode 100644
index 4bcd58abb..000000000
--- a/1.2-netsec/configs/modem.conf.sample
+++ /dev/null
@@ -1,92 +0,0 @@
-;
-; isdn4linux
-;
-; Configuration file
-;
-[interfaces]
-;
-; By default, incoming calls should come in on the "remote" context
-;
-context=remote
-;
-; Modem Drivers to load
-;
-driver=aopen	; modem by AOpen
-;driver=i4l	; isdn4linux - an alternative to i4l is to use chan_capi
-;
-; Default language
-;
-;language=en
-;
-; We can optionally override the auto detection.  This is necessary
-; particularly if asterisk does not know about our kind of modem.
-;
-;type=autodetect
-;type=aopen
-;
-; We can strip a given number of digits on outgoing dialing, so, for example
-; you can have it dial "8871042" when given "98871042".
-;
-stripmsd=0
-;
-; Type of dialing
-;
-dialtype=tone
-;dialtype=pulse
-;
-; Mode selection.  "Immediate" means that as soon as you dial, you're connected
-; and the line is considered up.  "Ring" means we wait until the ring cadence
-; occurs at least once.  "Answer" means we wait until the other end picks up. 
-;
-;mode=answer
-;mode=ring
-mode=immediate
-;
-; List all devices we can use.
-;
-;device => /dev/ttyS3
-;
-; ISDN example (using i4l)
-;
-;msn=39907835
-;device => /dev/ttyI0
-
-;===============
-; More complex ISDN example
-;
-; A single device which listens to 3 MSNs
-; the wildcard '*' can be used when all MSN's should be accepted.
-; (The incoming number can be used to go directly into the extension
-; with the matching number. I.e. if MSN 33 is called, (context,33)
-; will tried first, than (context,s) and finally (default,s).
-;
-;msn=50780020
-;incomingmsn=50780020,50780021,50780022
-;device => /dev/ttyI2
-;
-; If set, only these numbers are allowed to be set as A number
-; when making an outbound call. callerid is used to set A
-; number.
-;outgoingmsn=50780023,50780024
-;
-
-; Set DTMF-detection/generation mode to:
-;  asterisk: Let Asterisk do inband detection (default)
-;  i4l:      Use the inband detection made by ISDN4Linux
-;  none:     Don't detect inband DTMF
-;  both:     Transmit using both in-band and out of band (generation only)
-;
-; You may specify either one mode, or the detection/generation mode
-; individually separated by a '/'.
-;
-;dtmfmode=asterisk			; Detect using Asterisk
-;dtmfmode=asterisk/both		; Detect using Asterisk, generate w/ both
-; two other devices, which are in group '1' and are used when an
-; outgoing dial used: exten => s,1,Dial,Modem/g1:1234|60|r
-; (we do not need more outgoing devices, since ISDN2 has only 2 channels.)
-; Lines can be in more than one group (0-63); comma separated list.
-;
-group=1		; group=1,2,3,9-12
-;msn=50780023
-;device => /dev/ttyI3
-;device => /dev/ttyI4