diff options
Diffstat (limited to '1.2-netsec/codecs/gsm/Makefile')
| -rw-r--r-- | 1.2-netsec/codecs/gsm/Makefile | 583 |
1 files changed, 0 insertions, 583 deletions
diff --git a/1.2-netsec/codecs/gsm/Makefile b/1.2-netsec/codecs/gsm/Makefile deleted file mode 100644 index d6eb94bb8..000000000 --- a/1.2-netsec/codecs/gsm/Makefile +++ /dev/null @@ -1,583 +0,0 @@ -# Copyright 1992-1996 by Jutta Degener and Carsten Bormann, Technische -# Universitaet Berlin. See the accompanying file "COPYRIGHT" for -# details. THERE IS ABSOLUTELY NO WARRANTY FOR THIS SOFTWARE. - -# Machine- or installation dependent flags you should configure to port - -SASR = -DSASR -######### Define SASR if >> is a signed arithmetic shift (-1 >> 1 == -1) - -#MULHACK = -DUSE_FLOAT_MUL -######### Define this if your host multiplies floats faster than integers, -######### e.g. on a SPARCstation. - -#FAST = -DFAST -######### Define together with USE_FLOAT_MUL to enable the GSM library's -######### approximation option for incorrect, but good-enough results. - -# LTP_CUT = -DLTP_CUT -LTP_CUT = -######### Define to enable the GSM library's long-term correlation -######### approximation option---faster, but worse; works for -######### both integer and floating point multiplications. -######### This flag is still in the experimental stage. - -WAV49 = -DWAV49 -#WAV49 = -######### Define to enable the GSM library's option to pack GSM frames -######### in the style used by the WAV #49 format. If you want to write -######### a tool that produces .WAV files which contain GSM-encoded data, -######### define this, and read about the GSM_OPT_WAV49 option in the -######### manual page on gsm_option(3). - -#K6OPT = -DK6OPT -#K6OPT = -######### Define to enable MMXTM optimizations for x86 architecture CPU's -######### which support MMX instructions. This should be newer pentiums, -######### ppro's, etc, as well as the AMD K6 and K7. The compile will -######### probably require gcc. - -ifneq (${OSARCH},Darwin) -ifneq (${OSARCH},SunOS) -ifneq (${PROC},x86_64) -ifneq (${PROC},ultrasparc) -ifneq ($(shell uname -m),ppc) -ifneq ($(shell uname -m),ppc64) -ifneq ($(shell uname -m),alpha) -ifneq ($(shell uname -m),armv4l) -ifneq (${PROC},sparc64) -ifneq (${PROC},arm) -ifneq (${PROC},ppc) -ifneq (${PROC},ppc64) -OPTIMIZE+=-march=$(PROC) -endif -endif -endif -endif -endif -endif -endif -endif -endif -endif -endif -endif - -#The problem with sparc is the best stuff is in newer versions of gcc (post 3.0) only. -#This works for even old (2.96) versions of gcc and provides a small boost either way. -#A ultrasparc cpu is really v9 but the stock debian stable 3.0 gcc doesn't support it. -#So we go lowest common available by gcc and go a step down, still a step up from -#the default as we now have a better instruction set to work with. - Belgarath -ifeq (${PROC},ultrasparc) -OPTIMIZE+=-mcpu=v8 -mtune=$(PROC) -O3 -endif - -PG = -#PG = -g -pg -######### Profiling flags. If you don't know what that means, leave it blank. - -# Choose a compiler. The code works both with ANSI and K&R-C. -# Use -DNeedFunctionPrototypes to compile with, -UNeedFunctionPrototypes to -# compile without, function prototypes in the header files. -# -# You can use the -DSTUPID_COMPILER to circumvent some compilers' -# static limits regarding the number of subexpressions in a statement. - -# CC = cc -# CCFLAGS = -c -DSTUPID_COMPILER - -# CC = /usr/lang/acc -# CCFLAGS = -c -O - -CC ?= gcc -CCFLAGS += -c -DNeedFunctionPrototypes=1 -funroll-loops $(OPTIMIZE) -ifneq ($(findstring CYGWIN,${OSARCH}),CYGWIN) -CCFLAGS += -fPIC -endif - - -LD = $(CC) - -# LD = gcc -# LDFLAGS = - - -# If your compiler needs additional flags/libraries, regardless of -# the source compiled, configure them here. - -# CCINC = -I/usr/gnu/lib/gcc-2.1/gcc-lib/sparc-sun-sunos4.1.2/2.1/include -######### Includes needed by $(CC) - -# LDINC = -L/usr/gnu/lib/gcc-2.1/gcc-lib/sparc-sun-sunos4.1.2/2.1 -######### Library paths needed by $(LD) - -# LDLIB = -lgcc -######### Additional libraries needed by $(LD) - - -# Where do you want to install libraries, binaries, a header file -# and the manual pages? -# -# Leave INSTALL_ROOT empty (or just don't execute "make install") to -# not install gsm and toast outside of this directory. - -INSTALL_ROOT = - -# Where do you want to install the gsm library, header file, and manpages? -# -# Leave GSM_INSTALL_ROOT empty to not install the GSM library outside of -# this directory. - -GSM_INSTALL_ROOT = $(INSTALL_ROOT) -GSM_INSTALL_LIB = $(GSM_INSTALL_ROOT)/lib -GSM_INSTALL_INC = $(GSM_INSTALL_ROOT)/inc -GSM_INSTALL_MAN = $(GSM_INSTALL_ROOT)/man/man3 - - -# Where do you want to install the toast binaries and their manpage? -# -# Leave TOAST_INSTALL_ROOT empty to not install the toast binaries outside -# of this directory. - -TOAST_INSTALL_ROOT = $(INSTALL_ROOT) -TOAST_INSTALL_BIN = $(TOAST_INSTALL_ROOT)/bin -TOAST_INSTALL_MAN = $(TOAST_INSTALL_ROOT)/man/man1 - -# Other tools - -SHELL = /bin/sh -LN = ln -BASENAME = basename -AR = ar -ARFLAGS = cr -RMFLAGS = -f -FIND = find -COMPRESS = compress -COMPRESSFLAGS = -# RANLIB = true -RANLIB = ranlib - -# -# You shouldn't have to configure below this line if you're porting. -# - - -# Local Directories - -ROOT = . -ADDTST = $(ROOT)/add-test -TST = $(ROOT)/tst -MAN = $(ROOT)/man -BIN = $(ROOT)/bin -SRC = $(ROOT)/src -LIB = $(ROOT)/lib -TLS = $(ROOT)/tls -INC = $(ROOT)/inc - -# Flags - -DEBUG = -DNDEBUG -######### Remove -DNDEBUG to enable assertions. - -CFLAGS += $(PG) $(CCFLAGS) $(SASR) $(DEBUG) $(MULHACK) $(FAST) \ - $(LTP_CUT) $(WAV49) $(K6OPT) $(CCINC) -I$(INC) -######### It's $(CC) $(CFLAGS) - -LFLAGS = $(PG) $(LDFLAGS) $(LDINC) -######### It's $(LD) $(LFLAGS) - - -# Targets - -LIBGSM = $(LIB)/libgsm.a -LIBGSMSO= $(LIB)/libgsm.so - -TOAST = $(BIN)/toast -UNTOAST = $(BIN)/untoast -TCAT = $(BIN)/tcat - -# Headers - -GSM_HEADERS = $(INC)/gsm.h - -HEADERS = $(INC)/proto.h \ - $(INC)/unproto.h \ - $(INC)/config.h \ - $(INC)/private.h \ - $(INC)/gsm.h \ - $(INC)/toast.h \ - $(TLS)/taste.h - -# Sources - -GSM_SOURCES = $(SRC)/add.c \ - $(SRC)/code.c \ - $(SRC)/debug.c \ - $(SRC)/decode.c \ - $(SRC)/long_term.c \ - $(SRC)/lpc.c \ - $(SRC)/preprocess.c \ - $(SRC)/rpe.c \ - $(SRC)/gsm_destroy.c \ - $(SRC)/gsm_decode.c \ - $(SRC)/gsm_encode.c \ - $(SRC)/gsm_explode.c \ - $(SRC)/gsm_implode.c \ - $(SRC)/gsm_create.c \ - $(SRC)/gsm_print.c \ - $(SRC)/gsm_option.c \ - $(SRC)/short_term.c \ - $(SRC)/table.c -ifeq (${OSARCH},Linux) -ifneq ($(shell uname -m),x86_64) -ifneq ($(shell uname -m),ppc) -ifneq ($(shell uname -m),ppc64) -ifneq ($(shell uname -m),alpha) -ifneq ($(shell uname -m),armv4l) -ifneq ($(shell uname -m),sparc64) -ifneq (${PROC},arm) -GSM_SOURCES+= $(SRC)/k6opt.s -endif -endif -endif -endif -endif -endif -endif -endif - -TOAST_SOURCES = $(SRC)/toast.c \ - $(SRC)/toast_lin.c \ - $(SRC)/toast_ulaw.c \ - $(SRC)/toast_alaw.c \ - $(SRC)/toast_audio.c - -SOURCES = $(GSM_SOURCES) \ - $(TOAST_SOURCES) \ - $(ADDTST)/add_test.c \ - $(TLS)/sour.c \ - $(TLS)/ginger.c \ - $(TLS)/sour1.dta \ - $(TLS)/sour2.dta \ - $(TLS)/bitter.c \ - $(TLS)/bitter.dta \ - $(TLS)/taste.c \ - $(TLS)/sweet.c \ - $(TST)/cod2lin.c \ - $(TST)/cod2txt.c \ - $(TST)/gsm2cod.c \ - $(TST)/lin2cod.c \ - $(TST)/lin2txt.c - -# Object files - -GSM_OBJECTS = $(SRC)/add.o \ - $(SRC)/code.o \ - $(SRC)/debug.o \ - $(SRC)/decode.o \ - $(SRC)/long_term.o \ - $(SRC)/lpc.o \ - $(SRC)/preprocess.o \ - $(SRC)/rpe.o \ - $(SRC)/gsm_destroy.o \ - $(SRC)/gsm_decode.o \ - $(SRC)/gsm_encode.o \ - $(SRC)/gsm_explode.o \ - $(SRC)/gsm_implode.o \ - $(SRC)/gsm_create.o \ - $(SRC)/gsm_print.o \ - $(SRC)/gsm_option.o \ - $(SRC)/short_term.o \ - $(SRC)/table.o - -ifeq (${OSARCH},Linux) -ifneq ($(shell uname -m), x86_64) -ifneq ($(shell uname -m), ppc) -ifneq ($(shell uname -m), ppc64) -ifneq ($(shell uname -m), alpha) -ifneq ($(shell uname -m), sparc64) -ifneq ($(shell uname -m), armv4l) -GSM_OBJECTS+= $(SRC)/k6opt.o -endif -endif -endif -endif -endif -endif -endif - -TOAST_OBJECTS = $(SRC)/toast.o \ - $(SRC)/toast_lin.o \ - $(SRC)/toast_ulaw.o \ - $(SRC)/toast_alaw.o \ - $(SRC)/toast_audio.o - -OBJECTS = $(GSM_OBJECTS) $(TOAST_OBJECTS) - -# Manuals - -GSM_MANUALS = $(MAN)/gsm.3 \ - $(MAN)/gsm_explode.3 \ - $(MAN)/gsm_option.3 \ - $(MAN)/gsm_print.3 - -TOAST_MANUALS = $(MAN)/toast.1 - -MANUALS = $(GSM_MANUALS) $(TOAST_MANUALS) $(MAN)/bitter.1 - -# Other stuff in the distribution - -STUFF = ChangeLog \ - INSTALL \ - MACHINES \ - MANIFEST \ - Makefile \ - README \ - $(ADDTST)/add_test.dta \ - $(TLS)/bitter.dta \ - $(TST)/run - - -# Install targets - -GSM_INSTALL_TARGETS = \ - $(GSM_INSTALL_LIB)/libgsm.a \ - $(GSM_INSTALL_INC)/gsm.h \ - $(GSM_INSTALL_MAN)/gsm.3 \ - $(GSM_INSTALL_MAN)/gsm_explode.3 \ - $(GSM_INSTALL_MAN)/gsm_option.3 \ - $(GSM_INSTALL_MAN)/gsm_print.3 - -TOAST_INSTALL_TARGETS = \ - $(TOAST_INSTALL_BIN)/toast \ - $(TOAST_INSTALL_BIN)/tcat \ - $(TOAST_INSTALL_BIN)/untoast \ - $(TOAST_INSTALL_MAN)/toast.1 - - -# Default rules - -.c.o: - $(CC) $(CFLAGS) $? - @-mv `$(BASENAME) $@` $@ > /dev/null 2>&1 - -# Target rules - -all: $(LIBGSM) $(LIBGSMSO) $(TOAST) $(TCAT) $(UNTOAST) - @-echo $(ROOT): Done. - -tst: $(TST)/lin2cod $(TST)/cod2lin $(TOAST) $(TST)/test-result - @-echo tst: Done. - -addtst: $(ADDTST)/add $(ADDTST)/add_test.dta - $(ADDTST)/add < $(ADDTST)/add_test.dta > /dev/null - @-echo addtst: Done. - -misc: $(TLS)/sweet $(TLS)/bitter $(TLS)/sour $(TLS)/ginger \ - $(TST)/lin2txt $(TST)/cod2txt $(TST)/gsm2cod - @-echo misc: Done. - -install: toastinstall gsminstall - @-echo install: Done. - - -# The basic API: libgsm - -$(LIBGSMSO): $(LIB) $(GSM_OBJECTS) - $(LD) -o $@.1.0.10 -shared -Xlinker -soname -Xlinker libgsm.so.1 $(GSM_OBJECTS) -lc - ln -fs libgsm.so.1.0.10 lib/libgsm.so.1 - ln -fs libgsm.so.1.0.10 lib/libgsm.so - -$(LIBGSM): $(LIB) $(GSM_OBJECTS) - -rm $(RMFLAGS) $(LIBGSM) - $(AR) $(ARFLAGS) $(LIBGSM) $(GSM_OBJECTS) - $(RANLIB) $(LIBGSM) - - -# Toast, Untoast and Tcat -- the compress-like frontends to gsm. - -$(TOAST): $(BIN) $(TOAST_OBJECTS) $(LIBGSM) - $(LD) $(LFLAGS) -o $(TOAST) $(TOAST_OBJECTS) $(LIBGSMSO) $(LDLIB) - -$(UNTOAST): $(BIN) $(TOAST) - -rm $(RMFLAGS) $(UNTOAST) - $(LN) toast $(UNTOAST) - -$(TCAT): $(BIN) $(TOAST) - -rm $(RMFLAGS) $(TCAT) - $(LN) toast $(TCAT) - - -# The local bin and lib directories - -$(BIN): - if [ ! -d $(BIN) ] ; then mkdir $(BIN) ; fi - -$(LIB): - if [ ! -d $(LIB) ] ; then mkdir $(LIB) ; fi - - -# Installation - -gsminstall: - -if [ x"$(GSM_INSTALL_ROOT)" != x ] ; then \ - $(MAKE) $(GSM_INSTALL_TARGETS) ; \ - fi - -toastinstall: - -if [ x"$(TOAST_INSTALL_ROOT)" != x ]; then \ - $(MAKE) $(TOAST_INSTALL_TARGETS); \ - fi - -gsmuninstall: - -if [ x"$(GSM_INSTALL_ROOT)" != x ] ; then \ - rm $(RMFLAGS) $(GSM_INSTALL_TARGETS) ; \ - fi - -toastuninstall: - -if [ x"$(TOAST_INSTALL_ROOT)" != x ] ; then \ - rm $(RMFLAGS) $(TOAST_INSTALL_TARGETS); \ - fi - -$(TOAST_INSTALL_BIN)/toast: $(TOAST) - -rm $@ - cp $(TOAST) $@ - chmod 755 $@ - -$(TOAST_INSTALL_BIN)/untoast: $(TOAST_INSTALL_BIN)/toast - -rm $@ - ln $? $@ - -$(TOAST_INSTALL_BIN)/tcat: $(TOAST_INSTALL_BIN)/toast - -rm $@ - ln $? $@ - -$(TOAST_INSTALL_MAN)/toast.1: $(MAN)/toast.1 - -rm $@ - cp $? $@ - chmod 444 $@ - -$(GSM_INSTALL_MAN)/gsm.3: $(MAN)/gsm.3 - -rm $@ - cp $? $@ - chmod 444 $@ - -$(GSM_INSTALL_MAN)/gsm_option.3: $(MAN)/gsm_option.3 - -rm $@ - cp $? $@ - chmod 444 $@ - -$(GSM_INSTALL_MAN)/gsm_explode.3: $(MAN)/gsm_explode.3 - -rm $@ - cp $? $@ - chmod 444 $@ - -$(GSM_INSTALL_MAN)/gsm_print.3: $(MAN)/gsm_print.3 - -rm $@ - cp $? $@ - chmod 444 $@ - -$(GSM_INSTALL_INC)/gsm.h: $(INC)/gsm.h - -rm $@ - cp $? $@ - chmod 444 $@ - -$(GSM_INSTALL_LIB)/libgsm.a: $(LIBGSM) - -rm $@ - cp $? $@ - chmod 444 $@ - - -# Distribution - -dist: gsm-1.0.tar.Z - @echo dist: Done. - -gsm-1.0.tar.Z: $(STUFF) $(SOURCES) $(HEADERS) $(MANUALS) - ( cd $(ROOT)/..; \ - tar cvf - `cat $(ROOT)/gsm-1.0/MANIFEST \ - | sed '/^#/d'` \ - ) | $(COMPRESS) $(COMPRESSFLAGS) > $(ROOT)/gsm-1.0.tar.Z - -# Clean - -uninstall: toastuninstall gsmuninstall - @-echo uninstall: Done. - -semi-clean: - -rm $(RMFLAGS) */*.o \ - $(TST)/lin2cod $(TST)/lin2txt \ - $(TST)/cod2lin $(TST)/cod2txt \ - $(TST)/gsm2cod \ - $(TST)/*.*.* - -$(FIND) . \( -name core -o -name foo \) \ - -print | xargs rm $(RMFLAGS) - -clean: semi-clean - -rm $(RMFLAGS) $(LIBGSM) $(ADDTST)/add \ - $(TOAST) $(TCAT) $(UNTOAST) \ - $(ROOT)/gsm-1.0.tar.Z - rm -rf lib - -# Two tools that helped me generate gsm_encode.c and gsm_decode.c, -# but aren't generally needed to port this. - -$(TLS)/sweet: $(TLS)/sweet.o $(TLS)/taste.o - $(LD) $(LFLAGS) -o $(TLS)/sweet \ - $(TLS)/sweet.o $(TLS)/taste.o $(LDLIB) - -$(TLS)/bitter: $(TLS)/bitter.o $(TLS)/taste.o - $(LD) $(LFLAGS) -o $(TLS)/bitter \ - $(TLS)/bitter.o $(TLS)/taste.o $(LDLIB) - -# A version of the same family that Jeff Chilton used to implement -# the WAV #49 GSM format. - -$(TLS)/ginger: $(TLS)/ginger.o $(TLS)/taste.o - $(LD) $(LFLAGS) -o $(TLS)/ginger \ - $(TLS)/ginger.o $(TLS)/taste.o $(LDLIB) - -$(TLS)/sour: $(TLS)/sour.o $(TLS)/taste.o - $(LD) $(LFLAGS) -o $(TLS)/sour \ - $(TLS)/sour.o $(TLS)/taste.o $(LDLIB) - -# Run $(ADDTST)/add < $(ADDTST)/add_test.dta to make sure the -# basic arithmetic functions work as intended. - -$(ADDTST)/add: $(ADDTST)/add_test.o - $(LD) $(LFLAGS) -o $(ADDTST)/add $(ADDTST)/add_test.o $(LDLIB) - - -# Various conversion programs between linear, text, .gsm and the code -# format used by the tests we ran (.cod). We paid for the test data, -# so I guess we can't just provide them with this package. Still, -# if you happen to have them lying around, here's the code. -# -# You can use gsm2cod | cod2txt independently to look at what's -# coded inside the compressed frames, although this shouldn't be -# hard to roll on your own using the gsm_print() function from -# the API. - - -$(TST)/test-result: $(TST)/lin2cod $(TST)/cod2lin $(TOAST) $(TST)/run - ( cd $(TST); ./run ) - -$(TST)/lin2txt: $(TST)/lin2txt.o $(LIBGSM) - $(LD) $(LFLAGS) -o $(TST)/lin2txt \ - $(TST)/lin2txt.o $(LIBGSM) $(LDLIB) - -$(TST)/lin2cod: $(TST)/lin2cod.o $(LIBGSM) - $(LD) $(LFLAGS) -o $(TST)/lin2cod \ - $(TST)/lin2cod.o $(LIBGSM) $(LDLIB) - -$(TST)/gsm2cod: $(TST)/gsm2cod.o $(LIBGSM) - $(LD) $(LFLAGS) -o $(TST)/gsm2cod \ - $(TST)/gsm2cod.o $(LIBGSM) $(LDLIB) - -$(TST)/cod2txt: $(TST)/cod2txt.o $(LIBGSM) - $(LD) $(LFLAGS) -o $(TST)/cod2txt \ - $(TST)/cod2txt.o $(LIBGSM) $(LDLIB) - -$(TST)/cod2lin: $(TST)/cod2lin.o $(LIBGSM) - $(LD) $(LFLAGS) -o $(TST)/cod2lin \ - $(TST)/cod2lin.o $(LIBGSM) $(LDLIB) |