aboutsummaryrefslogtreecommitdiffstats
path: root/main/dsp.c
diff options
context:
space:
mode:
authorrussell <russell@f38db490-d61c-443f-a65b-d21fe96a405b>2007-11-21 18:52:19 +0000
committerrussell <russell@f38db490-d61c-443f-a65b-d21fe96a405b>2007-11-21 18:52:19 +0000
commit3564d9257727368bdc4d7eb258f575bcd466cec7 (patch)
treeb45c77653bd46c7b205d2c00dccf4087934dfb7f /main/dsp.c
parent21981c69ae3f2bb4f513c9b453ab96254a4e92d1 (diff)
Remove obsolete OLD_DSP_ROUTINES code. Also, remove the FAX_DETECT define and
only do the calculations if fax detection is enabled on the dsp. (closes issue #11331) Reported by: dimas Patches: dsp.patch uploaded by dimas (license 88) git-svn-id: http://svn.digium.com/svn/asterisk/trunk@89490 f38db490-d61c-443f-a65b-d21fe96a405b
Diffstat (limited to 'main/dsp.c')
-rw-r--r--main/dsp.c393
1 files changed, 14 insertions, 379 deletions
diff --git a/main/dsp.c b/main/dsp.c
index f744ab5fc..c98ee7f6c 100644
--- a/main/dsp.c
+++ b/main/dsp.c
@@ -117,9 +117,6 @@ enum busy_detect {
/*! Remember last 15 units */
#define DSP_HISTORY 15
-/*! Define if you want the fax detector -- NOT RECOMMENDED IN -STABLE */
-#define FAX_DETECT
-
#define TONE_THRESH 10.0 /*!< How much louder the tone should be than channel energy */
#define TONE_MIN_THRESH 1e8 /*!< How much tone there should be at least to attempt */
@@ -162,17 +159,9 @@ enum gsamp_thresh {
#define DTMF_2ND_HARMONIC_COL 63.1 /* 18dB */
#define DTMF_TO_TOTAL_ENERGY 42.0
-#ifdef OLD_DSP_ROUTINES
-#define MF_THRESHOLD 8.0e7
-#define MF_NORMAL_TWIST 5.3 /* 8dB */
-#define MF_REVERSE_TWIST 4.0 /* was 2.5 */
-#define MF_RELATIVE_PEAK 5.3 /* 8dB */
-#define MF_2ND_HARMONIC 1.7 /* was 2.5 */
-#else
#define BELL_MF_THRESHOLD 1.6e9
#define BELL_MF_TWIST 4.0 /* 6dB */
#define BELL_MF_RELATIVE_PEAK 12.6 /* 11dB */
-#endif
#if !defined(BUSYDETECT_MARTIN) && !defined(BUSYDETECT) && !defined(BUSYDETECT_TONEONLY) && !defined(BUSYDETECT_COMPARE_TONE_AND_SILENCE)
#define BUSYDETECT_MARTIN
@@ -183,9 +172,7 @@ typedef struct {
int v3;
int chunky;
int fac;
-#ifndef OLD_DSP_ROUTINES
int samples;
-#endif
} goertzel_state_t;
typedef struct {
@@ -197,22 +184,8 @@ typedef struct
{
goertzel_state_t row_out[4];
goertzel_state_t col_out[4];
-#ifdef FAX_DETECT
goertzel_state_t fax_tone;
-#endif
-#ifdef OLD_DSP_ROUTINES
- goertzel_state_t row_out2nd[4];
- goertzel_state_t col_out2nd[4];
-#ifdef FAX_DETECT
- goertzel_state_t fax_tone2nd;
-#endif
- int hit1;
- int hit2;
- int hit3;
- int hit4;
-#else
int lasthit;
-#endif
int mhit;
float energy;
int current_sample;
@@ -223,25 +196,14 @@ typedef struct
int detected_digits;
int lost_digits;
int digit_hits[16];
-#ifdef FAX_DETECT
int fax_hits;
-#endif
} dtmf_detect_state_t;
typedef struct
{
goertzel_state_t tone_out[6];
int mhit;
-#ifdef OLD_DSP_ROUTINES
- int hit1;
- int hit2;
- int hit3;
- int hit4;
- goertzel_state_t tone_out2nd[6];
- float energy;
-#else
int hits[5];
-#endif
int current_sample;
char digits[MAX_DTMF_DIGITS + 1];
@@ -249,9 +211,6 @@ typedef struct
int current_digits;
int detected_digits;
int lost_digits;
-#ifdef FAX_DETECT
- int fax_hits;
-#endif
} mf_detect_state_t;
static float dtmf_row[] =
@@ -268,24 +227,11 @@ static float mf_tones[] =
700.0, 900.0, 1100.0, 1300.0, 1500.0, 1700.0
};
-#ifdef FAX_DETECT
static float fax_freq = 1100.0;
-#endif
static char dtmf_positions[] = "123A" "456B" "789C" "*0#D";
-#ifdef OLD_DSP_ROUTINES
-static char mf_hit[6][6] = {
- /* 700 + */ { 0, '1', '2', '4', '7', 'C' },
- /* 900 + */ { '1', 0, '3', '5', '8', 'A' },
- /* 1100 + */ { '2', '3', 0, '6', '9', '*' },
- /* 1300 + */ { '4', '5', '6', 0, '0', 'B' },
- /* 1500 + */ { '7', '8', '9', '0', 0, '#' },
- /* 1700 + */ { 'C', 'A', '*', 'B', '#', 0 },
-};
-#else
static char bell_mf_positions[] = "1247C-358A--69*---0B----#";
-#endif
static inline void goertzel_sample(goertzel_state_t *s, short sample)
{
@@ -326,9 +272,7 @@ static inline void goertzel_init(goertzel_state_t *s, float freq, int samples)
{
s->v2 = s->v3 = s->chunky = 0.0;
s->fac = (int)(32768.0 * 2.0 * cos(2.0 * M_PI * (freq / 8000.0)));
-#ifndef OLD_DSP_ROUTINES
s->samples = samples;
-#endif
}
static inline void goertzel_reset(goertzel_state_t *s)
@@ -369,33 +313,15 @@ static void ast_dtmf_detect_init (dtmf_detect_state_t *s)
{
int i;
-#ifdef OLD_DSP_ROUTINES
- s->hit1 =
- s->mhit =
- s->hit3 =
- s->hit4 =
- s->hit2 = 0;
-#else
s->lasthit = 0;
-#endif
for (i = 0; i < 4; i++) {
goertzel_init (&s->row_out[i], dtmf_row[i], 102);
goertzel_init (&s->col_out[i], dtmf_col[i], 102);
-#ifdef OLD_DSP_ROUTINES
- goertzel_init (&s->row_out2nd[i], dtmf_row[i] * 2.0, 102);
- goertzel_init (&s->col_out2nd[i], dtmf_col[i] * 2.0, 102);
-#endif
s->energy = 0.0;
}
-#ifdef FAX_DETECT
/* Same for the fax dector */
goertzel_init (&s->fax_tone, fax_freq, 102);
-#ifdef OLD_DSP_ROUTINES
- /* Same for the fax dector 2nd harmonic */
- goertzel_init (&s->fax_tone2nd, fax_freq * 2.0, 102);
-#endif
-#endif /* FAX_DETECT */
s->current_sample = 0;
s->detected_digits = 0;
s->current_digits = 0;
@@ -407,18 +333,9 @@ static void ast_dtmf_detect_init (dtmf_detect_state_t *s)
static void ast_mf_detect_init (mf_detect_state_t *s)
{
int i;
-#ifdef OLD_DSP_ROUTINES
- s->hit1 =
- s->hit2 = 0;
-#else
s->hits[0] = s->hits[1] = s->hits[2] = s->hits[3] = s->hits[4] = 0;
-#endif
for (i = 0; i < 6; i++) {
goertzel_init (&s->tone_out[i], mf_tones[i], 160);
-#ifdef OLD_DSP_ROUTINES
- goertzel_init (&s->tone_out2nd[i], mf_tones[i] * 2.0, 160);
- s->energy = 0.0;
-#endif
}
s->current_digits = 0;
memset(&s->digits, 0, sizeof(s->digits));
@@ -434,12 +351,7 @@ static int dtmf_detect (dtmf_detect_state_t *s, int16_t amp[], int samples,
{
float row_energy[4];
float col_energy[4];
-#ifdef FAX_DETECT
- float fax_energy;
-#ifdef OLD_DSP_ROUTINES
- float fax_energy_2nd;
-#endif
-#endif /* FAX_DETECT */
+ float fax_energy = 0.0;
float famp;
int i;
int j;
@@ -456,16 +368,6 @@ static int dtmf_detect (dtmf_detect_state_t *s, int16_t amp[], int samples,
limit = sample + (102 - s->current_sample);
else
limit = samples;
-#if defined(USE_3DNOW)
- _dtmf_goertzel_update (s->row_out, amp + sample, limit - sample);
- _dtmf_goertzel_update (s->col_out, amp + sample, limit - sample);
-#ifdef OLD_DSP_ROUTINES
- _dtmf_goertzel_update (s->row_out2nd, amp + sample, limit2 - sample);
- _dtmf_goertzel_update (s->col_out2nd, amp + sample, limit2 - sample);
-#endif
- /* XXX Need to fax detect for 3dnow too XXX */
- #warning "Fax Support Broken"
-#else
/* The following unrolled loop takes only 35% (rough estimate) of the
time of a rolled loop on the machine on which it was developed */
for (j = sample; j < limit; j++) {
@@ -481,44 +383,11 @@ static int dtmf_detect (dtmf_detect_state_t *s, int16_t amp[], int samples,
goertzel_sample(s->col_out + 2, amp[j]);
goertzel_sample(s->row_out + 3, amp[j]);
goertzel_sample(s->col_out + 3, amp[j]);
-#ifdef FAX_DETECT
+
/* Update fax tone */
- goertzel_sample(&s->fax_tone, amp[j]);
-#endif /* FAX_DETECT */
-#ifdef OLD_DSP_ROUTINES
- v1 = s->col_out2nd[0].v2;
- s->col_out2nd[0].v2 = s->col_out2nd[0].v3;
- s->col_out2nd[0].v3 = s->col_out2nd[0].fac*s->col_out2nd[0].v2 - v1 + famp;
- v1 = s->row_out2nd[0].v2;
- s->row_out2nd[0].v2 = s->row_out2nd[0].v3;
- s->row_out2nd[0].v3 = s->row_out2nd[0].fac*s->row_out2nd[0].v2 - v1 + famp;
- v1 = s->col_out2nd[1].v2;
- s->col_out2nd[1].v2 = s->col_out2nd[1].v3;
- s->col_out2nd[1].v3 = s->col_out2nd[1].fac*s->col_out2nd[1].v2 - v1 + famp;
- v1 = s->row_out2nd[1].v2;
- s->row_out2nd[1].v2 = s->row_out2nd[1].v3;
- s->row_out2nd[1].v3 = s->row_out2nd[1].fac*s->row_out2nd[1].v2 - v1 + famp;
- v1 = s->col_out2nd[2].v2;
- s->col_out2nd[2].v2 = s->col_out2nd[2].v3;
- s->col_out2nd[2].v3 = s->col_out2nd[2].fac*s->col_out2nd[2].v2 - v1 + famp;
- v1 = s->row_out2nd[2].v2;
- s->row_out2nd[2].v2 = s->row_out2nd[2].v3;
- s->row_out2nd[2].v3 = s->row_out2nd[2].fac*s->row_out2nd[2].v2 - v1 + famp;
- v1 = s->col_out2nd[3].v2;
- s->col_out2nd[3].v2 = s->col_out2nd[3].v3;
- s->col_out2nd[3].v3 = s->col_out2nd[3].fac*s->col_out2nd[3].v2 - v1 + famp;
- v1 = s->row_out2nd[3].v2;
- s->row_out2nd[3].v2 = s->row_out2nd[3].v3;
- s->row_out2nd[3].v3 = s->row_out2nd[3].fac*s->row_out2nd[3].v2 - v1 + famp;
-#ifdef FAX_DETECT
- /* Update fax tone */
- v1 = s->fax_tone.v2;
- s->fax_tone2nd.v2 = s->fax_tone2nd.v3;
- s->fax_tone2nd.v3 = s->fax_tone2nd.fac*s->fax_tone2nd.v2 - v1 + famp;
-#endif /* FAX_DETECT */
-#endif
+ if (faxdetect)
+ goertzel_sample(&s->fax_tone, amp[j]);
}
-#endif
s->current_sample += (limit - sample);
if (s->current_sample < 102) {
if (hit && !((digitmode & DSP_DIGITMODE_NOQUELCH))) {
@@ -530,10 +399,9 @@ static int dtmf_detect (dtmf_detect_state_t *s, int16_t amp[], int samples,
}
continue;
}
-#ifdef FAX_DETECT
/* Detect the fax energy, too */
- fax_energy = goertzel_result(&s->fax_tone);
-#endif
+ if (faxdetect)
+ fax_energy = goertzel_result(&s->fax_tone);
/* We are at the end of a DTMF detection block */
/* Find the peak row and the peak column */
row_energy[0] = goertzel_result (&s->row_out[0]);
@@ -562,17 +430,9 @@ static int dtmf_detect (dtmf_detect_state_t *s, int16_t amp[], int samples,
break;
}
}
-#ifdef OLD_DSP_ROUTINES
- /* ... and second harmonic test */
- if (i >= 4 &&
- (row_energy[best_row] + col_energy[best_col]) > 42.0*s->energy &&
- goertzel_result(&s->col_out2nd[best_col])*DTMF_2ND_HARMONIC_COL < col_energy[best_col]
- && goertzel_result(&s->row_out2nd[best_row])*DTMF_2ND_HARMONIC_ROW < row_energy[best_row]) {
-#else
/* ... and fraction of total energy test */
if (i >= 4 &&
(row_energy[best_row] + col_energy[best_col]) > DTMF_TO_TOTAL_ENERGY*s->energy) {
-#endif
/* Got a hit */
hit = dtmf_positions[(best_row << 2) + best_col];
if (!(digitmode & DSP_DIGITMODE_NOQUELCH)) {
@@ -581,30 +441,9 @@ static int dtmf_detect (dtmf_detect_state_t *s, int16_t amp[], int samples,
amp[i] = 0;
*writeback = 1;
}
-#ifdef OLD_DSP_ROUTINES
- /* Look for two successive similar results */
- /* The logic in the next test is:
- We need two successive identical clean detects, with
- something different preceeding it. This can work with
- back to back differing digits. More importantly, it
- can work with nasty phones that give a very wobbly start
- to a digit */
- if (hit == s->hit3 && s->hit3 != s->hit2) {
- s->mhit = hit;
- s->digit_hits[(best_row << 2) + best_col]++;
- s->detected_digits++;
- if (s->current_digits < MAX_DTMF_DIGITS) {
- s->digits[s->current_digits++] = hit;
- s->digits[s->current_digits] = '\0';
- } else {
- s->lost_digits++;
- }
- }
-#endif
}
}
-#ifndef OLD_DSP_ROUTINES
/* Look for two successive similar results */
/* The logic in the next test is:
We need two successive identical clean detects, with
@@ -625,15 +464,9 @@ static int dtmf_detect (dtmf_detect_state_t *s, int16_t amp[], int samples,
}
s->mhit = hit;
}
-#endif
-#ifdef FAX_DETECT
- if (!hit && (fax_energy >= FAX_THRESHOLD) &&
- (fax_energy >= DTMF_TO_TOTAL_ENERGY*s->energy) &&
- (faxdetect)) {
-#if 0
- printf("Fax energy/Second Harmonic: %f\n", fax_energy);
-#endif
+ if (!hit && faxdetect && (fax_energy >= FAX_THRESHOLD) &&
+ (fax_energy >= DTMF_TO_TOTAL_ENERGY*s->energy)) {
/* XXX Probably need better checking than just this the energy XXX */
hit = 'f';
s->fax_hits++;
@@ -651,64 +484,29 @@ static int dtmf_detect (dtmf_detect_state_t *s, int16_t amp[], int samples,
}
s->fax_hits = 0;
}
-#endif /* FAX_DETECT */
-#ifdef OLD_DSP_ROUTINES
- s->hit1 = s->hit2;
- s->hit2 = s->hit3;
- s->hit3 = hit;
-#else
s->lasthit = hit;
-#endif
/* Reinitialise the detector for the next block */
for (i = 0; i < 4; i++) {
goertzel_reset(&s->row_out[i]);
goertzel_reset(&s->col_out[i]);
-#ifdef OLD_DSP_ROUTINES
- goertzel_reset(&s->row_out2nd[i]);
- goertzel_reset(&s->col_out2nd[i]);
-#endif
}
-#ifdef FAX_DETECT
- goertzel_reset (&s->fax_tone);
-#ifdef OLD_DSP_ROUTINES
- goertzel_reset (&s->fax_tone2nd);
-#endif
-#endif
+ if (faxdetect)
+ goertzel_reset (&s->fax_tone);
s->energy = 0.0;
s->current_sample = 0;
}
-#ifdef OLD_DSP_ROUTINES
- if ((!s->mhit) || (s->mhit != hit)) {
- s->mhit = 0;
- return(0);
- }
- return (hit);
-#else
return (s->mhit); /* return the debounced hit */
-#endif
}
/* MF goertzel size */
-#ifdef OLD_DSP_ROUTINES
-#define MF_GSIZE 160
-#else
#define MF_GSIZE 120
-#endif
static int mf_detect (mf_detect_state_t *s, int16_t amp[],
int samples, int digitmode, int *writeback)
{
-#ifdef OLD_DSP_ROUTINES
- float tone_energy[6];
- int best1;
- int best2;
- float max;
- int sofarsogood;
-#else
float energy[6];
int best;
int second_best;
-#endif
float famp;
int i;
int j;
@@ -723,23 +521,10 @@ static int mf_detect (mf_detect_state_t *s, int16_t amp[],
limit = sample + (MF_GSIZE - s->current_sample);
else
limit = samples;
-#if defined(USE_3DNOW)
- _dtmf_goertzel_update (s->row_out, amp + sample, limit - sample);
- _dtmf_goertzel_update (s->col_out, amp + sample, limit - sample);
-#ifdef OLD_DSP_ROUTINES
- _dtmf_goertzel_update (s->row_out2nd, amp + sample, limit2 - sample);
- _dtmf_goertzel_update (s->col_out2nd, amp + sample, limit2 - sample);
-#endif
- /* XXX Need to fax detect for 3dnow too XXX */
- #warning "Fax Support Broken"
-#else
/* The following unrolled loop takes only 35% (rough estimate) of the
time of a rolled loop on the machine on which it was developed */
for (j = sample; j < limit; j++) {
famp = amp[j];
-#ifdef OLD_DSP_ROUTINES
- s->energy += famp*famp;
-#endif
/* With GCC 2.95, the following unrolled code seems to take about 35%
(rough estimate) as long as a neat little 0-3 loop */
goertzel_sample(s->tone_out, amp[j]);
@@ -748,28 +533,7 @@ static int mf_detect (mf_detect_state_t *s, int16_t amp[],
goertzel_sample(s->tone_out + 3, amp[j]);
goertzel_sample(s->tone_out + 4, amp[j]);
goertzel_sample(s->tone_out + 5, amp[j]);
-#ifdef OLD_DSP_ROUTINES
- v1 = s->tone_out2nd[0].v2;
- s->tone_out2nd[0].v2 = s->tone_out2nd[0].v3;
- s->tone_out2nd[0].v3 = s->tone_out2nd[0].fac*s->tone_out2nd[0].v2 - v1 + famp;
- v1 = s->tone_out2nd[1].v2;
- s->tone_out2nd[1].v2 = s->tone_out2nd[1].v3;
- s->tone_out2nd[1].v3 = s->tone_out2nd[1].fac*s->tone_out2nd[1].v2 - v1 + famp;
- v1 = s->tone_out2nd[2].v2;
- s->tone_out2nd[2].v2 = s->tone_out2nd[2].v3;
- s->tone_out2nd[2].v3 = s->tone_out2nd[2].fac*s->tone_out2nd[2].v2 - v1 + famp;
- v1 = s->tone_out2nd[3].v2;
- s->tone_out2nd[3].v2 = s->tone_out2nd[3].v3;
- s->tone_out2nd[3].v3 = s->tone_out2nd[3].fac*s->tone_out2nd[3].v2 - v1 + famp;
- v1 = s->tone_out2nd[4].v2;
- s->tone_out2nd[4].v2 = s->tone_out2nd[4].v3;
- s->tone_out2nd[4].v3 = s->tone_out2nd[4].fac*s->tone_out2nd[2].v2 - v1 + famp;
- v1 = s->tone_out2nd[3].v2;
- s->tone_out2nd[5].v2 = s->tone_out2nd[6].v3;
- s->tone_out2nd[5].v3 = s->tone_out2nd[6].fac*s->tone_out2nd[3].v2 - v1 + famp;
-#endif
}
-#endif
s->current_sample += (limit - sample);
if (s->current_sample < MF_GSIZE) {
if (hit && !((digitmode & DSP_DIGITMODE_NOQUELCH))) {
@@ -781,99 +545,6 @@ static int mf_detect (mf_detect_state_t *s, int16_t amp[],
}
continue;
}
-#ifdef OLD_DSP_ROUTINES
- /* We're at the end of an MF detection block. Go ahead and calculate
- all the energies. */
- for (i=0;i<6;i++) {
- tone_energy[i] = goertzel_result(&s->tone_out[i]);
- }
- /* Find highest */
- best1 = 0;
- max = tone_energy[0];
- for (i=1;i<6;i++) {
- if (tone_energy[i] > max) {
- max = tone_energy[i];
- best1 = i;
- }
- }
-
- /* Find 2nd highest */
- if (best1) {
- max = tone_energy[0];
- best2 = 0;
- } else {
- max = tone_energy[1];
- best2 = 1;
- }
-
- for (i=0;i<6;i++) {
- if (i == best1) continue;
- if (tone_energy[i] > max) {
- max = tone_energy[i];
- best2 = i;
- }
- }
- hit = 0;
- if (best1 != best2)
- sofarsogood=1;
- else
- sofarsogood=0;
- /* Check for relative energies */
- for (i=0;i<6;i++) {
- if (i == best1)
- continue;
- if (i == best2)
- continue;
- if (tone_energy[best1] < tone_energy[i] * MF_RELATIVE_PEAK) {
- sofarsogood = 0;
- break;
- }
- if (tone_energy[best2] < tone_energy[i] * MF_RELATIVE_PEAK) {
- sofarsogood = 0;
- break;
- }
- }
-
- if (sofarsogood) {
- /* Check for 2nd harmonic */
- if (goertzel_result(&s->tone_out2nd[best1]) * MF_2ND_HARMONIC > tone_energy[best1])
- sofarsogood = 0;
- else if (goertzel_result(&s->tone_out2nd[best2]) * MF_2ND_HARMONIC > tone_energy[best2])
- sofarsogood = 0;
- }
- if (sofarsogood) {
- hit = mf_hit[best1][best2];
- if (!(digitmode & DSP_DIGITMODE_NOQUELCH)) {
- /* Zero out frame data if this is part DTMF */
- for (i=sample;i<limit;i++)
- amp[i] = 0;
- *writeback = 1;
- }
- /* Look for two consecutive clean hits */
- if ((hit == s->hit3) && (s->hit3 != s->hit2)) {
- s->mhit = hit;
- s->detected_digits++;
- if (s->current_digits < MAX_DTMF_DIGITS - 2) {
- s->digits[s->current_digits++] = hit;
- s->digits[s->current_digits] = '\0';
- } else {
- s->lost_digits++;
- }
- }
- }
-
- s->hit1 = s->hit2;
- s->hit2 = s->hit3;
- s->hit3 = hit;
- /* Reinitialise the detector for the next block */
- for (i = 0; i < 6; i++) {
- goertzel_reset(&s->tone_out[i]);
- goertzel_reset(&s->tone_out2nd[i]);
- }
- s->energy = 0.0;
- s->current_sample = 0;
- }
-#else
/* We're at the end of an MF detection block. */
/* Find the two highest energies. The spec says to look for
two tones and two tones only. Taking this literally -ie
@@ -957,7 +628,6 @@ static int mf_detect (mf_detect_state_t *s, int16_t amp[],
goertzel_reset(&s->tone_out[i]);
s->current_sample = 0;
}
-#endif
if ((!s->mhit) || (s->mhit != hit)) {
s->mhit = 0;
return(0);
@@ -1064,11 +734,6 @@ static int __ast_dsp_call_progress(struct ast_dsp *dsp, short *s, int len)
float hz[7];
for (y=0;y<7;y++)
hz[y] = goertzel_result(&dsp->freqs[y]);
-#if 0
- printf("\n350: 425: 440: 480: 620: 950: 1400: 1800: Energy: \n");
- printf("%.2e %.2e %.2e %.2e %.2e %.2e %.2e %.2e %.2e\n",
- hz[HZ_350], hz[HZ_425], hz[HZ_440], hz[HZ_480], hz[HZ_620], hz[HZ_950], hz[HZ_1400], hz[HZ_1800], dsp->genergy);
-#endif
switch (dsp->progmode) {
case PROG_MODE_NA:
if (pair_there(hz[HZ_480], hz[HZ_620], hz[HZ_350], hz[HZ_440], dsp->genergy)) {
@@ -1148,17 +813,13 @@ static int __ast_dsp_call_progress(struct ast_dsp *dsp, short *s, int len)
break;
}
if (dsp->ringtimeout==THRESH_RING2ANSWER) {
-#if 0
- ast_log(LOG_NOTICE, "Consider call as answered because of timeout after last ring\n");
-#endif
+ ast_debug(1, "Consider call as answered because of timeout after last ring\n");
res = AST_CONTROL_ANSWER;
dsp->features &= ~DSP_FEATURE_CALL_PROGRESS;
}
} else {
-#if 0
- ast_log(LOG_NOTICE, "Stop state %d with duration %d\n", dsp->tstate, dsp->tcount);
- ast_log(LOG_NOTICE, "Start state %d\n", newstate);
-#endif
+ ast_debug(5, "Stop state %d with duration %d\n", dsp->tstate, dsp->tcount);
+ ast_debug(5, "Start state %d\n", newstate);
dsp->tstate = newstate;
dsp->tcount = 1;
}
@@ -1170,10 +831,7 @@ static int __ast_dsp_call_progress(struct ast_dsp *dsp, short *s, int len)
dsp->genergy = 0.0;
}
}
-#if 0
- if (res)
- printf("Returning %d\n", res);
-#endif
+
return res;
}
@@ -1328,12 +986,10 @@ int ast_dsp_busydetect(struct ast_dsp *dsp)
}
#endif
#ifndef BUSYDETECT_TONEONLY
-#if 1
if (res) {
ast_debug(1, "ast_dsp_busydetect detected busy, avgtone: %d, avgsilence %d\n", avgtone, avgsilence);
}
#endif
-#endif
return res;
}
#endif
@@ -1665,16 +1321,8 @@ void ast_dsp_digitreset(struct ast_dsp *dsp)
/* Reinitialise the detector for the next block */
for (i = 0; i < 6; i++) {
goertzel_reset(&dsp->td.mf.tone_out[i]);
-#ifdef OLD_DSP_ROUTINES
- goertzel_reset(&dsp->td.mf.tone_out2nd[i]);
-#endif
}
-#ifdef OLD_DSP_ROUTINES
- dsp->td.mf.energy = 0.0;
- dsp->td.mf.hit1 = dsp->td.mf.hit2 = dsp->td.mf.hit3 = dsp->td.mf.hit4 = dsp->td.mf.mhit = 0;
-#else
dsp->td.mf.hits[4] = dsp->td.mf.hits[3] = dsp->td.mf.hits[2] = dsp->td.mf.hits[1] = dsp->td.mf.hits[0] = dsp->td.mf.mhit = 0;
-#endif
dsp->td.mf.current_sample = 0;
} else {
memset(dsp->td.dtmf.digits, 0, sizeof(dsp->td.dtmf.digits));
@@ -1683,22 +1331,9 @@ void ast_dsp_digitreset(struct ast_dsp *dsp)
for (i = 0; i < 4; i++) {
goertzel_reset(&dsp->td.dtmf.row_out[i]);
goertzel_reset(&dsp->td.dtmf.col_out[i]);
-#ifdef OLD_DSP_ROUTINES
- goertzel_reset(&dsp->td.dtmf.row_out2nd[i]);
- goertzel_reset(&dsp->td.dtmf.col_out2nd[i]);
-#endif
}
-#ifdef FAX_DETECT
goertzel_reset (&dsp->td.dtmf.fax_tone);
-#endif
-#ifdef OLD_DSP_ROUTINES
-#ifdef FAX_DETECT
- goertzel_reset (&dsp->td.dtmf.fax_tone2nd);
-#endif
- dsp->td.dtmf.hit1 = dsp->td.dtmf.hit2 = dsp->td.dtmf.hit3 = dsp->td.dtmf.hit4 = dsp->td.dtmf.mhit = 0;
-#else
dsp->td.dtmf.lasthit = dsp->td.dtmf.mhit = 0;
-#endif
dsp->td.dtmf.energy = 0.0;
dsp->td.dtmf.current_sample = 0;
}