Add CLI commands to the docs

git-svn-id: http://svn.digium.com/svn/asterisk/trunk@72938 f38db490-d61c-443f-a65b-d21fe96a405b

2 files changed, 3510 insertions, 0 deletions

diff --git a/doc/ast_cli_commands.tex b/doc/ast_cli_commands.tex
new file mode 100644
index 000000000..e7e58b4e4
--- /dev/null
+++ b/doc/ast_cli_commands.tex
@@ -0,0 +1,3505 @@
+% This file is automatically generated by the "core dump clidocs" CLI command.  Any manual edits will be lost.
+\section{!}
+\subsection{Summary}
+\begin{verbatim}
+Execute a shell command
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: !<command>
+       Executes a given shell command
+
+\end{verbatim}
+
+
+\section{abort halt}
+\subsection{Summary}
+\begin{verbatim}
+Cancel a running halt
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: abort shutdown
+       Causes Asterisk to abort an executing shutdown or restart, and resume normal
+       call operations.
+
+\end{verbatim}
+
+
+\section{ael debug contexts}
+\subsection{Summary}
+\begin{verbatim}
+Enable AEL contexts debug (does nothing)
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+(null)
+\end{verbatim}
+
+
+\section{ael debug macros}
+\subsection{Summary}
+\begin{verbatim}
+Enable AEL macros debug (does nothing)
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+(null)
+\end{verbatim}
+
+
+\section{ael debug read}
+\subsection{Summary}
+\begin{verbatim}
+Enable AEL read debug (does nothing)
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+(null)
+\end{verbatim}
+
+
+\section{ael debug tokens}
+\subsection{Summary}
+\begin{verbatim}
+Enable AEL tokens debug (does nothing)
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+(null)
+\end{verbatim}
+
+
+\section{ael nodebug}
+\subsection{Summary}
+\begin{verbatim}
+Disable AEL debug messages
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+(null)
+\end{verbatim}
+
+
+\section{ael reload}
+\subsection{Summary}
+\begin{verbatim}
+Reload AEL configuration
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+(null)
+\end{verbatim}
+
+
+\section{agent logoff}
+\subsection{Summary}
+\begin{verbatim}
+Sets an agent offline
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: agent logoff <channel> [soft]
+       Sets an agent as no longer logged in.
+       If 'soft' is specified, do not hangup existing calls.
+
+\end{verbatim}
+
+
+\section{agent show}
+\subsection{Summary}
+\begin{verbatim}
+Show status of agents
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: agent show
+       Provides summary information on agents.
+
+\end{verbatim}
+
+
+\section{agent show online}
+\subsection{Summary}
+\begin{verbatim}
+Show all online agents
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: agent show online
+	Provides a list of all online agents.
+
+\end{verbatim}
+
+
+\section{agi debug}
+\subsection{Summary}
+\begin{verbatim}
+Enable AGI debugging
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: agi debug
+       Enables dumping of AGI transactions for debugging purposes
+
+\end{verbatim}
+
+
+\section{agi debug off}
+\subsection{Summary}
+\begin{verbatim}
+Disable AGI debugging
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: agi debug off
+       Disables dumping of AGI transactions for debugging purposes
+
+\end{verbatim}
+
+
+\section{agi dump commanddocs}
+\subsection{Summary}
+\begin{verbatim}
+Dump agi command documentation in LaTeX format
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: agi dump commanddocs [command]
+       Dump manager action documentation to /tmp/ast_agi_commands.tex.
+
+\end{verbatim}
+
+
+\section{agi dumphtml}
+\subsection{Summary}
+\begin{verbatim}
+Dumps a list of agi commands in html format
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: agi dumphtml <filename>
+	Dumps the agi command list in html format to given filename
+
+\end{verbatim}
+
+
+\section{agi show}
+\subsection{Summary}
+\begin{verbatim}
+List AGI commands or specific help
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: agi show [topic]
+       When called with a topic as an argument, displays usage
+       information on the given command.  If called without a
+       topic, it provides a list of AGI commands.
+
+\end{verbatim}
+
+
+\section{cdr status}
+\subsection{Summary}
+\begin{verbatim}
+Display the CDR status
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: cdr status
+	Displays the Call Detail Record engine system status.
+
+\end{verbatim}
+
+
+\section{console active}
+\subsection{Summary}
+\begin{verbatim}
+Sets/displays active console
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: console active [device]
+       If used without a parameter, displays which device is the current
+console.  If a device is specified, the console sound device is changed to
+the device specified.
+
+\end{verbatim}
+
+
+\section{console answer}
+\subsection{Summary}
+\begin{verbatim}
+Answer an incoming console call
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: console answer
+       Answers an incoming call on the console (OSS) channel.
+
+\end{verbatim}
+
+
+\section{console autoanswer [on|off]}
+\subsection{Summary}
+\begin{verbatim}
+Sets/displays autoanswer
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: console autoanswer [on|off]
+       Enables or disables autoanswer feature.  If used without
+       argument, displays the current on/off status of autoanswer.
+       The default value of autoanswer is in 'oss.conf'.
+
+\end{verbatim}
+
+
+\section{console boost}
+\subsection{Summary}
+\begin{verbatim}
+Sets/displays mic boost in dB
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+(null)
+\end{verbatim}
+
+
+\section{console dial}
+\subsection{Summary}
+\begin{verbatim}
+Dial an extension on the console
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: console dial [extension[@context]]
+       Dials a given extension (and context if specified)
+
+\end{verbatim}
+
+
+\section{console flash}
+\subsection{Summary}
+\begin{verbatim}
+Flash a call on the console
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: console flash
+       Flashes the call currently placed on the console.
+
+\end{verbatim}
+
+
+\section{console hangup}
+\subsection{Summary}
+\begin{verbatim}
+Hangup a call on the console
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: console hangup
+       Hangs up any call currently placed on the console.
+
+\end{verbatim}
+
+
+\section{console {mute|unmute}}
+\subsection{Summary}
+\begin{verbatim}
+Disable/Enable mic input
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: console {mute|unmute}
+       Mute/unmute the microphone.
+
+\end{verbatim}
+
+
+\section{console send text}
+\subsection{Summary}
+\begin{verbatim}
+Send text to the remote device
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: console send text <message>
+       Sends a text message for display on the remote terminal.
+
+\end{verbatim}
+
+
+\section{console transfer}
+\subsection{Summary}
+\begin{verbatim}
+Transfer a call to a different extension
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: console transfer <extension>[@context]
+       Transfers the currently connected call to the given extension (and
+context if specified)
+
+\end{verbatim}
+
+
+\section{core clear profile}
+\subsection{Summary}
+\begin{verbatim}
+Clear profiling info
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+(null)
+\end{verbatim}
+
+
+\section{core dump appdocs}
+\subsection{Summary}
+\begin{verbatim}
+Dump application documentation in LaTeX format
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: core dump appdocs [application]
+       Dump Application documentation to /tmp/ast_appdocs.tex.
+
+\end{verbatim}
+
+
+\section{core dump clidocs}
+\subsection{Summary}
+\begin{verbatim}
+Dump CLI command documentation in LaTeX format
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: core dump clidocs
+       Dump CLI command documentation to /tmp/ast_cli_commands.tex.
+
+\end{verbatim}
+
+
+\section{core dump funcdocs}
+\subsection{Summary}
+\begin{verbatim}
+Dump function documentation in LaTeX format
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: core dump funcdocs [function]
+       Dump Application documentation to /tmp/ast_funcdocs.tex.
+
+\end{verbatim}
+
+
+\section{core set debug channel}
+\subsection{Summary}
+\begin{verbatim}
+Enable/disable debugging on a channel
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: core set debug channel <all|channel> [off]
+       Enables/disables debugging on all or on a specific channel.
+
+\end{verbatim}
+
+
+\section{core set {debug|verbose} [off|atleast]}
+\subsection{Summary}
+\begin{verbatim}
+Set level of debug/verbose chattiness
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: core set {debug|verbose} [atleast] <level>
+       core set {debug|verbose} off
+       Sets level of debug or verbose messages to be displayed.
+	0 or off means no messages should be displayed.
+	Equivalent to -d[d[...]] or -v[v[v...]] on startup
+
+\end{verbatim}
+
+
+\section{core set global}
+\subsection{Summary}
+\begin{verbatim}
+Set global dialplan variable
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: core set global <name> <value>
+       Set global dialplan variable <name> to <value>
+
+\end{verbatim}
+
+
+\section{core show applications}
+\subsection{Summary}
+\begin{verbatim}
+Shows registered dialplan applications
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: core show applications [{like|describing} <text>]
+       List applications which are currently available.
+       If 'like', <text> will be a substring of the app name
+       If 'describing', <text> will be a substring of the description
+
+\end{verbatim}
+
+
+\section{core show application}
+\subsection{Summary}
+\begin{verbatim}
+Describe a specific dialplan application
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: core show application <application> [<application> [<application> [...]]]
+       Describes a particular application.
+
+\end{verbatim}
+
+
+\section{core show channels [concise|verbose|count]}
+\subsection{Summary}
+\begin{verbatim}
+Display information on channels
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: core show channels [concise|verbose|count]
+       Lists currently defined channels and some information about them. If
+       'concise' is specified, the format is abridged and in a more easily
+       machine parsable format. If 'verbose' is specified, the output includes
+       more and longer fields. If 'count' is specified only the channel and call
+       count is output.
+
+\end{verbatim}
+
+
+\section{core show channel}
+\subsection{Summary}
+\begin{verbatim}
+Display information on a specific channel
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: core show channel <channel>
+       Shows lots of information about the specified channel.
+
+\end{verbatim}
+
+
+\section{core show channeltypes}
+\subsection{Summary}
+\begin{verbatim}
+List available channel types
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: core show channeltypes
+       Lists available channel types registered in your Asterisk server.
+
+\end{verbatim}
+
+
+\section{core show channeltype}
+\subsection{Summary}
+\begin{verbatim}
+Give more details on that channel type
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: core show channeltype <name>
+	Show details about the specified channel type, <name>.
+
+\end{verbatim}
+
+
+\section{core show codecs}
+\subsection{Summary}
+\begin{verbatim}
+Displays a list of codecs
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: core show codecs [audio|video|image]
+       Displays codec mapping
+
+\end{verbatim}
+
+
+\section{core show codecs audio}
+\subsection{Summary}
+\begin{verbatim}
+Displays a list of audio codecs
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: core show codecs [audio|video|image]
+       Displays codec mapping
+
+\end{verbatim}
+
+
+\section{core show codecs image}
+\subsection{Summary}
+\begin{verbatim}
+Displays a list of image codecs
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: core show codecs [audio|video|image]
+       Displays codec mapping
+
+\end{verbatim}
+
+
+\section{core show codecs video}
+\subsection{Summary}
+\begin{verbatim}
+Displays a list of video codecs
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: core show codecs [audio|video|image]
+       Displays codec mapping
+
+\end{verbatim}
+
+
+\section{core show codec}
+\subsection{Summary}
+\begin{verbatim}
+Shows a specific codec
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: core show codec <number>
+       Displays codec mapping
+
+\end{verbatim}
+
+
+\section{core show config mappings}
+\subsection{Summary}
+\begin{verbatim}
+Display config mappings (file names to config engines)
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: core show config mappings
+	Shows the filenames to config engines.
+
+\end{verbatim}
+
+
+\section{core show file formats}
+\subsection{Summary}
+\begin{verbatim}
+Displays file formats
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: core show file formats
+       Displays currently registered file formats (if any)
+
+\end{verbatim}
+
+
+\section{core show file version}
+\subsection{Summary}
+\begin{verbatim}
+List versions of files used to build Asterisk
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: core show file version [like <pattern>]
+       Lists the revision numbers of the files used to build this copy of Asterisk.
+       Optional regular expression pattern is used to filter the file list.
+
+\end{verbatim}
+
+
+\section{core show functions}
+\subsection{Summary}
+\begin{verbatim}
+Shows registered dialplan functions
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: core show functions [like <text>]
+       List builtin functions, optionally only those matching a given string
+
+\end{verbatim}
+
+
+\section{core show function}
+\subsection{Summary}
+\begin{verbatim}
+Describe a specific dialplan function
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: core show function <function>
+       Describe a particular dialplan function.
+
+\end{verbatim}
+
+
+\section{core show globals}
+\subsection{Summary}
+\begin{verbatim}
+Show global dialplan variables
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: core show globals
+       List current global dialplan variables and their values
+
+\end{verbatim}
+
+
+\section{core show hints}
+\subsection{Summary}
+\begin{verbatim}
+Show dialplan hints
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: core show hints
+       List registered hints
+
+\end{verbatim}
+
+
+\section{core show image formats}
+\subsection{Summary}
+\begin{verbatim}
+Displays image formats
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: core show image formats
+       displays currently registered image formats (if any)
+
+\end{verbatim}
+
+
+\section{core show license}
+\subsection{Summary}
+\begin{verbatim}
+Show the license(s) for this copy of Asterisk
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: core show license
+       Shows the license(s) for this copy of Asterisk.
+
+\end{verbatim}
+
+
+\section{core show profile}
+\subsection{Summary}
+\begin{verbatim}
+Display profiling info
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+(null)
+\end{verbatim}
+
+
+\section{core show settings}
+\subsection{Summary}
+\begin{verbatim}
+Show some core settings
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+(null)
+\end{verbatim}
+
+
+\section{core show switches}
+\subsection{Summary}
+\begin{verbatim}
+Show alternative switches
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: core show switches
+       List registered switches
+
+\end{verbatim}
+
+
+\section{core show sysinfo}
+\subsection{Summary}
+\begin{verbatim}
+Show System Information
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: core show sysinfo
+       List current system information.
+
+\end{verbatim}
+
+
+\section{core show threads}
+\subsection{Summary}
+\begin{verbatim}
+Show running threads
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: core show threads
+       List threads currently active in the system.
+
+\end{verbatim}
+
+
+\section{core show translation}
+\subsection{Summary}
+\begin{verbatim}
+Display translation matrix
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: core show translation [recalc] [<recalc seconds>]
+       Displays known codec translators and the cost associated
+with each conversion.  If the argument 'recalc' is supplied along
+with optional number of seconds to test a new test will be performed
+as the chart is being displayed.
+
+\end{verbatim}
+
+
+\section{core show uptime [seconds]}
+\subsection{Summary}
+\begin{verbatim}
+Show uptime information
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: core show uptime [seconds]
+       Shows Asterisk uptime information.
+       The seconds word returns the uptime in seconds only.
+
+\end{verbatim}
+
+
+\section{core show version}
+\subsection{Summary}
+\begin{verbatim}
+Display version info
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: core show version
+       Shows Asterisk version information.
+
+\end{verbatim}
+
+
+\section{core show warranty}
+\subsection{Summary}
+\begin{verbatim}
+Show the warranty (if any) for this copy of Asterisk
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: core show warranty
+       Shows the warranty (if any) for this copy of Asterisk.
+
+\end{verbatim}
+
+
+\section{database del}
+\subsection{Summary}
+\begin{verbatim}
+Removes database key/value
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: database del <family> <key>
+       Deletes an entry in the Asterisk database for a given
+family and key.
+
+\end{verbatim}
+
+
+\section{database deltree}
+\subsection{Summary}
+\begin{verbatim}
+Removes database keytree/values
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: database deltree <family> [keytree]
+       Deletes a family or specific keytree within a family
+in the Asterisk database.
+
+\end{verbatim}
+
+
+\section{database get}
+\subsection{Summary}
+\begin{verbatim}
+Gets database value
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: database get <family> <key>
+       Retrieves an entry in the Asterisk database for a given
+family and key.
+
+\end{verbatim}
+
+
+\section{database put}
+\subsection{Summary}
+\begin{verbatim}
+Adds/updates database value
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: database put <family> <key> <value>
+       Adds or updates an entry in the Asterisk database for
+a given family, key, and value.
+
+\end{verbatim}
+
+
+\section{database show}
+\subsection{Summary}
+\begin{verbatim}
+Shows database contents
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: database show [family [keytree]]
+       Shows Asterisk database contents, optionally restricted
+to a given family, or family and keytree.
+
+\end{verbatim}
+
+
+\section{database showkey}
+\subsection{Summary}
+\begin{verbatim}
+Shows database contents
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: database showkey <keytree>
+       Shows Asterisk database contents, restricted to a given key.
+
+\end{verbatim}
+
+
+\section{dialplan add extension}
+\subsection{Summary}
+\begin{verbatim}
+Add new extension into context
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: dialplan add extension <exten>,<priority>,<app>,<app-data>
+       into <context> [replace]
+
+       This command will add new extension into <context>. If there is an
+       existence of extension with the same priority and last 'replace'
+       arguments is given here we simply replace this extension.
+
+Example: dialplan add extension 6123,1,Dial,IAX/216.207.245.56/6123 into local
+         Now, you can dial 6123 and talk to Markster :)
+
+\end{verbatim}
+
+
+\section{dialplan add ignorepat}
+\subsection{Summary}
+\begin{verbatim}
+Add new ignore pattern
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: dialplan add ignorepat <pattern> into <context>
+       This command adds a new ignore pattern into context <context>
+
+Example: dialplan add ignorepat _3XX into local
+
+\end{verbatim}
+
+
+\section{dialplan add include}
+\subsection{Summary}
+\begin{verbatim}
+Include context in other context
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: dialplan add include <context> into <context>
+       Include a context in another context.
+
+\end{verbatim}
+
+
+\section{dialplan reload}
+\subsection{Summary}
+\begin{verbatim}
+Reload extensions and *only* extensions
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: dialplan reload
+       reload extensions.conf without reloading any other modules
+       This command does not delete global variables unless
+       clearglobalvars is set to yes in extensions.conf
+
+\end{verbatim}
+
+
+\section{dialplan remove extension}
+\subsection{Summary}
+\begin{verbatim}
+Remove a specified extension
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: dialplan remove extension exten@context [priority]
+       Remove an extension from a given context. If a priority
+       is given, only that specific priority from the given extension
+       will be removed.
+
+\end{verbatim}
+
+
+\section{dialplan remove ignorepat}
+\subsection{Summary}
+\begin{verbatim}
+Remove ignore pattern from context
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: dialplan remove ignorepat <pattern> from <context>
+       This command removes an ignore pattern from context <context>
+
+Example: dialplan remove ignorepat _3XX from local
+
+\end{verbatim}
+
+
+\section{dialplan remove include}
+\subsection{Summary}
+\begin{verbatim}
+Remove a specified include from context
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: dialplan remove include <context> from <context>
+       Remove an included context from another context.
+
+\end{verbatim}
+
+
+\section{dialplan save}
+\subsection{Summary}
+\begin{verbatim}
+Save dialplan
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: dialplan save [/path/to/extension/file]
+       Save dialplan created by pbx_config module.
+
+Example: dialplan save                 (/etc/asterisk/extensions.conf)
+         dialplan save /home/markster  (/home/markster/extensions.conf)
+
+\end{verbatim}
+
+
+\section{dialplan show}
+\subsection{Summary}
+\begin{verbatim}
+Show dialplan
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: core show dialplan [exten@][context]
+       Show dialplan
+
+\end{verbatim}
+
+
+\section{dnsmgr reload}
+\subsection{Summary}
+\begin{verbatim}
+Reloads the DNS manager configuration
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: dnsmgr reload
+       Reloads the DNS manager configuration.
+
+\end{verbatim}
+
+
+\section{dnsmgr status}
+\subsection{Summary}
+\begin{verbatim}
+Display the DNS manager status
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: dnsmgr status
+       Displays the DNS manager status.
+
+\end{verbatim}
+
+
+\section{dundi debug}
+\subsection{Summary}
+\begin{verbatim}
+Enable DUNDi debugging
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: dundi debug
+       Enables dumping of DUNDi packets for debugging purposes
+
+\end{verbatim}
+
+
+\section{dundi flush}
+\subsection{Summary}
+\begin{verbatim}
+Flush DUNDi cache
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: dundi flush [stats]
+       Flushes DUNDi answer cache, used primarily for debug.  If
+'stats' is present, clears timer statistics instead of normal
+operation.
+
+\end{verbatim}
+
+
+\section{dundi lookup}
+\subsection{Summary}
+\begin{verbatim}
+Lookup a number in DUNDi
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: dundi lookup <number>[@context] [bypass]
+       Lookup the given number within the given DUNDi context
+(or e164 if none is specified).  Bypasses cache if 'bypass'
+keyword is specified.
+
+\end{verbatim}
+
+
+\section{dundi no debug}
+\subsection{Summary}
+\begin{verbatim}
+Disable DUNDi debugging
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: dundi no debug
+       Disables dumping of DUNDi packets for debugging purposes
+
+\end{verbatim}
+
+
+\section{dundi no store history}
+\subsection{Summary}
+\begin{verbatim}
+Disable DUNDi historic records
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: dundi no store history
+       Disables storing of DUNDi requests and times for debugging
+purposes
+
+\end{verbatim}
+
+
+\section{dundi precache}
+\subsection{Summary}
+\begin{verbatim}
+Precache a number in DUNDi
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: dundi precache <number>[@context]
+       Lookup the given number within the given DUNDi context
+(or e164 if none is specified) and precaches the results to any
+upstream DUNDi push servers.
+
+\end{verbatim}
+
+
+\section{dundi query}
+\subsection{Summary}
+\begin{verbatim}
+Query a DUNDi EID
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: dundi query <entity>[@context]
+       Attempts to retrieve contact information for a specific
+DUNDi entity identifier (EID) within a given DUNDi context (or
+e164 if none is specified).
+
+\end{verbatim}
+
+
+\section{dundi show entityid}
+\subsection{Summary}
+\begin{verbatim}
+Display Global Entity ID
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: dundi show entityid
+       Displays the global entityid for this host.
+
+\end{verbatim}
+
+
+\section{dundi show mappings}
+\subsection{Summary}
+\begin{verbatim}
+Show DUNDi mappings
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: dundi show mappings
+       Lists all known DUNDi mappings.
+
+\end{verbatim}
+
+
+\section{dundi show peers}
+\subsection{Summary}
+\begin{verbatim}
+Show defined DUNDi peers
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: dundi show peers
+       Lists all known DUNDi peers.
+
+\end{verbatim}
+
+
+\section{dundi show peer}
+\subsection{Summary}
+\begin{verbatim}
+Show info on a specific DUNDi peer
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: dundi show peer [peer]
+       Provide a detailed description of a specifid DUNDi peer.
+
+\end{verbatim}
+
+
+\section{dundi show precache}
+\subsection{Summary}
+\begin{verbatim}
+Show DUNDi precache
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: dundi show precache
+       Lists all known DUNDi scheduled precache updates.
+
+\end{verbatim}
+
+
+\section{dundi show requests}
+\subsection{Summary}
+\begin{verbatim}
+Show DUNDi requests
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: dundi show requests
+       Lists all known pending DUNDi requests.
+
+\end{verbatim}
+
+
+\section{dundi show trans}
+\subsection{Summary}
+\begin{verbatim}
+Show active DUNDi transactions
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: dundi show trans
+       Lists all known DUNDi transactions.
+
+\end{verbatim}
+
+
+\section{dundi store history}
+\subsection{Summary}
+\begin{verbatim}
+Enable DUNDi historic records
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: dundi store history
+       Enables storing of DUNDi requests and times for debugging
+purposes
+
+\end{verbatim}
+
+
+\section{feature show}
+\subsection{Summary}
+\begin{verbatim}
+Lists configured features
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: feature list
+       Lists currently configured features.
+
+\end{verbatim}
+
+
+\section{file convert}
+\subsection{Summary}
+\begin{verbatim}
+Convert audio file
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: file convert <file_in> <file_out>
+    Convert from file_in to file_out. If an absolute path is not given, the
+default Asterisk sounds directory will be used.
+
+Example:
+    file convert tt-weasels.gsm tt-weasels.ulaw
+
+\end{verbatim}
+
+
+\section{funcdevstate list}
+\subsection{Summary}
+\begin{verbatim}
+List currently known custom device states
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: funcdevstate list
+       List all custom device states that have been set by using
+       the DEVSTATE dialplan function.
+
+\end{verbatim}
+
+
+\section{group show channels}
+\subsection{Summary}
+\begin{verbatim}
+Display active channels with group(s)
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: group show channels [pattern]
+       Lists all currently active channels with channel group(s) specified.
+       Optional regular expression pattern is matched to group names for each
+       channel.
+
+\end{verbatim}
+
+
+\section{gtalk reload}
+\subsection{Summary}
+\begin{verbatim}
+Enable Jabber debugging
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: gtalk reload
+       Reload gtalk channel driver.
+
+\end{verbatim}
+
+
+\section{gtalk show channels}
+\subsection{Summary}
+\begin{verbatim}
+Show GoogleTalk Channels
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: gtalk show channels
+       Shows current state of the Gtalk channels.
+
+\end{verbatim}
+
+
+\section{h323 cycle gk}
+\subsection{Summary}
+\begin{verbatim}
+Manually re-register with the Gatekeper
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: h323 gk cycle
+       Manually re-register with the Gatekeper (Currently Disabled)
+
+\end{verbatim}
+
+
+\section{h323 hangup}
+\subsection{Summary}
+\begin{verbatim}
+Manually try to hang up a call
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: h323 hangup <token>
+       Manually try to hang up call identified by <token>
+
+\end{verbatim}
+
+
+\section{h323 reload}
+\subsection{Summary}
+\begin{verbatim}
+Reload H.323 configuration
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: h323 reload
+       Reloads H.323 configuration from h323.conf
+
+\end{verbatim}
+
+
+\section{h323 set debug}
+\subsection{Summary}
+\begin{verbatim}
+Enable H.323 debug
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: h323 debug
+       Enables H.323 debug output
+
+\end{verbatim}
+
+
+\section{h323 set debug off}
+\subsection{Summary}
+\begin{verbatim}
+Disable H.323 debug
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: h323 no debug
+       Disables H.323 debug output
+
+\end{verbatim}
+
+
+\section{h323 set trace}
+\subsection{Summary}
+\begin{verbatim}
+Enable H.323 Stack Tracing
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: h323 trace <level num>
+       Enables H.323 stack tracing for debugging purposes
+
+\end{verbatim}
+
+
+\section{h323 set trace off}
+\subsection{Summary}
+\begin{verbatim}
+Disable H.323 Stack Tracing
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: h323 no trace
+       Disables H.323 stack tracing for debugging purposes
+
+\end{verbatim}
+
+
+\section{h323 show tokens}
+\subsection{Summary}
+\begin{verbatim}
+Show all active call tokens
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: h323 show tokens
+       Print out all active call tokens
+
+\end{verbatim}
+
+
+\section{help}
+\subsection{Summary}
+\begin{verbatim}
+Display help list, or specific help on a command
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: help [topic]
+       When called with a topic as an argument, displays usage
+       information on the given command. If called without a
+       topic, it provides a list of commands.
+
+\end{verbatim}
+
+
+\section{http show status}
+\subsection{Summary}
+\begin{verbatim}
+Display HTTP server status
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: http show status
+       Lists status of internal HTTP engine
+
+\end{verbatim}
+
+
+\section{iax2 provision}
+\subsection{Summary}
+\begin{verbatim}
+Provision an IAX device
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: iax2 provision <host> <template> [forced]
+       Provisions the given peer or IP address using a template
+       matching either 'template' or '*' if the template is not
+       found.  If 'forced' is specified, even empty provisioning
+       fields will be provisioned as empty fields.
+
+\end{verbatim}
+
+
+\section{iax2 prune realtime}
+\subsection{Summary}
+\begin{verbatim}
+Prune a cached realtime lookup
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: iax2 prune realtime [<peername>|all]
+       Prunes object(s) from the cache
+
+\end{verbatim}
+
+
+\section{iax2 reload}
+\subsection{Summary}
+\begin{verbatim}
+Reload IAX configuration
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: iax2 reload
+       Reloads IAX configuration from iax.conf
+
+\end{verbatim}
+
+
+\section{iax2 set debug}
+\subsection{Summary}
+\begin{verbatim}
+Enable IAX debugging
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: iax2 set debug
+       Enables dumping of IAX packets for debugging purposes
+
+\end{verbatim}
+
+
+\section{iax2 set debug jb}
+\subsection{Summary}
+\begin{verbatim}
+Enable IAX jitterbuffer debugging
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: iax2 set debug jb
+       Enables jitterbuffer debugging information
+
+\end{verbatim}
+
+
+\section{iax2 set debug jb off}
+\subsection{Summary}
+\begin{verbatim}
+Disable IAX jitterbuffer debugging
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: iax2 set debug jb off
+       Disables jitterbuffer debugging information
+
+\end{verbatim}
+
+
+\section{iax2 set debug off}
+\subsection{Summary}
+\begin{verbatim}
+Disable IAX debugging
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: iax2 set debug off
+       Disables dumping of IAX packets for debugging purposes
+
+\end{verbatim}
+
+
+\section{iax2 set debug trunk}
+\subsection{Summary}
+\begin{verbatim}
+Enable IAX trunk debugging
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: iax2 set debug trunk
+       Requests current status of IAX trunking
+
+\end{verbatim}
+
+
+\section{iax2 set debug trunk off}
+\subsection{Summary}
+\begin{verbatim}
+Disable IAX trunk debugging
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: iax2 set debug trunk off
+       Requests current status of IAX trunking
+
+\end{verbatim}
+
+
+\section{iax2 set mtu}
+\subsection{Summary}
+\begin{verbatim}
+Set the IAX systemwide trunking MTU
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: iax2 set mtu <value>
+       Set the system-wide IAX IP mtu to <value> bytes net or zero to disable.
+       Disabling means that the operating system must handle fragmentation of UDP packets
+       when the IAX2 trunk packet exceeds the UDP payload size.
+       This is substantially below the IP mtu. Try 1240 on ethernets.
+       Must be 172 or greater for G.711 samples.
+
+\end{verbatim}
+
+
+\section{iax2 show cache}
+\subsection{Summary}
+\begin{verbatim}
+Display IAX cached dialplan
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: iax2 show cache
+       Display currently cached IAX Dialplan results.
+
+\end{verbatim}
+
+
+\section{iax2 show channels}
+\subsection{Summary}
+\begin{verbatim}
+List active IAX channels
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: iax2 show channels
+       Lists all currently active IAX channels.
+
+\end{verbatim}
+
+
+\section{iax2 show firmware}
+\subsection{Summary}
+\begin{verbatim}
+List available IAX firmwares
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: iax2 show firmware
+       Lists all known IAX firmware images.
+
+\end{verbatim}
+
+
+\section{iax2 show netstats}
+\subsection{Summary}
+\begin{verbatim}
+List active IAX channel netstats
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: iax2 show netstats
+       Lists network status for all currently active IAX channels.
+
+\end{verbatim}
+
+
+\section{iax2 show peers}
+\subsection{Summary}
+\begin{verbatim}
+List defined IAX peers
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: iax2 show peers [registered] [like <pattern>]
+       Lists all known IAX2 peers.
+       Optional 'registered' argument lists only peers with known addresses.
+       Optional regular expression pattern is used to filter the peer list.
+
+\end{verbatim}
+
+
+\section{iax2 show peer}
+\subsection{Summary}
+\begin{verbatim}
+Show details on specific IAX peer
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: iax2 show peer <name>
+       Display details on specific IAX peer
+
+\end{verbatim}
+
+
+\section{iax2 show provisioning}
+\subsection{Summary}
+\begin{verbatim}
+Display iax provisioning
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: iax list provisioning [template]
+       Lists all known IAX provisioning templates or a
+       specific one if specified.
+
+\end{verbatim}
+
+
+\section{iax2 show registry}
+\subsection{Summary}
+\begin{verbatim}
+Display IAX registration status
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: iax2 show registry
+       Lists all registration requests and status.
+
+\end{verbatim}
+
+
+\section{iax2 show stats}
+\subsection{Summary}
+\begin{verbatim}
+Display IAX statistics
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: iax2 show stats
+       Display statistics on IAX channel driver.
+
+\end{verbatim}
+
+
+\section{iax2 show threads}
+\subsection{Summary}
+\begin{verbatim}
+Display IAX helper thread info
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: iax2 show threads
+       Lists status of IAX helper threads
+
+\end{verbatim}
+
+
+\section{iax2 show users}
+\subsection{Summary}
+\begin{verbatim}
+List defined IAX users
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: iax2 show users [like <pattern>]
+       Lists all known IAX2 users.
+       Optional regular expression pattern is used to filter the user list.
+
+\end{verbatim}
+
+
+\section{iax2 test losspct}
+\subsection{Summary}
+\begin{verbatim}
+Set IAX2 incoming frame loss percentage
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: iax2 test losspct <percentage>
+       For testing, throws away <percentage> percent of incoming packets
+
+\end{verbatim}
+
+
+\section{iax2 unregister}
+\subsection{Summary}
+\begin{verbatim}
+Unregister (force expiration) an IAX2 peer from the registry
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: iax2 unregister <peername>
+       Unregister (force expiration) an IAX2 peer from the registry.
+
+\end{verbatim}
+
+
+\section{indication add}
+\subsection{Summary}
+\begin{verbatim}
+Add the given indication to the country
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: indication add <country> <indication> "<tonelist>"
+       Add the given indication to the country.
+
+\end{verbatim}
+
+
+\section{indication remove}
+\subsection{Summary}
+\begin{verbatim}
+Remove the given indication from the country
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: indication remove <country> <indication>
+       Remove the given indication from the country.
+
+\end{verbatim}
+
+
+\section{indication show}
+\subsection{Summary}
+\begin{verbatim}
+Display a list of all countries/indications
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: indication show [<country> ...]
+       Display either a condensed for of all country/indications, or the
+       indications for the specified countries.
+
+\end{verbatim}
+
+
+\section{jabber debug}
+\subsection{Summary}
+\begin{verbatim}
+Enable Jabber debugging
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: jabber debug
+       Enables dumping of Jabber packets for debugging purposes.
+
+\end{verbatim}
+
+
+\section{jabber debug off}
+\subsection{Summary}
+\begin{verbatim}
+Disable Jabber debug
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: jabber debug off
+       Disables dumping of Jabber packets for debugging purposes.
+
+\end{verbatim}
+
+
+\section{jabber reload}
+\subsection{Summary}
+\begin{verbatim}
+Reload Jabber configuration
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: jabber reload
+       Enables reloading of Jabber module.
+
+\end{verbatim}
+
+
+\section{jabber show connected}
+\subsection{Summary}
+\begin{verbatim}
+Show state of clients and components
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: jabber debug
+       Enables dumping of Jabber packets for debugging purposes.
+
+\end{verbatim}
+
+
+\section{jabber test}
+\subsection{Summary}
+\begin{verbatim}
+Shows roster, but is generally used for mog's debugging.
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: jabber test [client]
+       Sends test message for debugging purposes.  A specific client
+       as configured in jabber.conf can be optionally specified.
+
+\end{verbatim}
+
+
+\section{keys init}
+\subsection{Summary}
+\begin{verbatim}
+Initialize RSA key passcodes
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: keys init
+       Initializes private keys (by reading in pass code from the user)
+
+\end{verbatim}
+
+
+\section{keys show}
+\subsection{Summary}
+\begin{verbatim}
+Displays RSA key information
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: keys show
+       Displays information about RSA keys known by Asterisk
+
+\end{verbatim}
+
+
+\section{local show channels}
+\subsection{Summary}
+\begin{verbatim}
+List status of local channels
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: local show channels
+       Provides summary information on active local proxy channels.
+
+\end{verbatim}
+
+
+\section{logger mute}
+\subsection{Summary}
+\begin{verbatim}
+Toggle logging output to a console
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: logger mute
+       Disables logging output to the current console, making it possible to
+       gather information without being disturbed by scrolling lines.
+
+\end{verbatim}
+
+
+\section{logger reload}
+\subsection{Summary}
+\begin{verbatim}
+Reopens the log files
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: logger reload
+       Reloads the logger subsystem state.  Use after restarting syslogd(8) if you are using syslog logging.
+
+\end{verbatim}
+
+
+\section{logger rotate}
+\subsection{Summary}
+\begin{verbatim}
+Rotates and reopens the log files
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: logger rotate
+       Rotates and Reopens the log files.
+
+\end{verbatim}
+
+
+\section{logger show channels}
+\subsection{Summary}
+\begin{verbatim}
+List configured log channels
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: logger show channels
+       List configured logger channels.
+
+\end{verbatim}
+
+
+\section{manager debug}
+\subsection{Summary}
+\begin{verbatim}
+Show, enable, disable debugging of the manager code
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: manager debug [on|off]
+	Show, enable, disable debugging of the manager code.
+
+\end{verbatim}
+
+
+\section{manager dump actiondocs}
+\subsection{Summary}
+\begin{verbatim}
+Dump manager action documentation in LaTeX format
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: manager dump actiondocs [action]
+       Dump manager action documentation to /tmp/ast_manager_actiondocs.tex.
+
+\end{verbatim}
+
+
+\section{manager show command}
+\subsection{Summary}
+\begin{verbatim}
+Show a manager interface command
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: manager show command <actionname>
+	Shows the detailed description for a specific Asterisk manager interface command.
+
+\end{verbatim}
+
+
+\section{manager show commands}
+\subsection{Summary}
+\begin{verbatim}
+List manager interface commands
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: manager show commands
+	Prints a listing of all the available Asterisk manager interface commands.
+
+\end{verbatim}
+
+
+\section{manager show connected}
+\subsection{Summary}
+\begin{verbatim}
+List connected manager interface users
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: manager show connected
+	Prints a listing of the users that are currently connected to the
+Asterisk manager interface.
+
+\end{verbatim}
+
+
+\section{manager show eventq}
+\subsection{Summary}
+\begin{verbatim}
+List manager interface queued events
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: manager show eventq
+	Prints a listing of all events pending in the Asterisk manger
+event queue.
+
+\end{verbatim}
+
+
+\section{manager show users}
+\subsection{Summary}
+\begin{verbatim}
+List configured manager users
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: manager show users
+       Prints a listing of all managers that are currently configured on that
+ system.
+
+\end{verbatim}
+
+
+\section{manager show user}
+\subsection{Summary}
+\begin{verbatim}
+Display information on a specific manager user
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+ Usage: manager show user <user>
+        Display all information related to the manager user specified.
+
+\end{verbatim}
+
+
+\section{meetme}
+\subsection{Summary}
+\begin{verbatim}
+Execute a command on a conference or conferee
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: meetme (un)lock|(un)mute|kick|list [concise] <confno> <usernumber>
+       Executes a command for the conference or on a conferee
+
+\end{verbatim}
+
+
+\section{memory show allocations}
+\subsection{Summary}
+\begin{verbatim}
+Display outstanding memory allocations
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: memory show allocations [<file>]
+       Dumps a list of all segments of allocated memory, optionally
+limited to those from a specific file
+
+\end{verbatim}
+
+
+\section{memory show summary}
+\subsection{Summary}
+\begin{verbatim}
+Summarize outstanding memory allocations
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: memory show summary [<file>]
+       Summarizes heap memory allocations by file, or optionally
+by function, if a file is specified
+
+\end{verbatim}
+
+
+\section{mgcp audit endpoint}
+\subsection{Summary}
+\begin{verbatim}
+Audit specified MGCP endpoint
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: mgcp audit endpoint <endpointid>
+       Lists the capabilities of an endpoint in the MGCP (Media Gateway Control Protocol) subsystem.
+       mgcp debug MUST be on to see the results of this command.
+
+\end{verbatim}
+
+
+\section{mgcp reload}
+\subsection{Summary}
+\begin{verbatim}
+Reload MGCP configuration
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: mgcp reload
+       Reloads MGCP configuration from mgcp.conf
+       Deprecated:  please use 'reload chan_mgcp.so' instead.
+
+\end{verbatim}
+
+
+\section{mgcp set debug}
+\subsection{Summary}
+\begin{verbatim}
+Enable MGCP debugging
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: mgcp set debug
+       Enables dumping of MGCP packets for debugging purposes
+
+\end{verbatim}
+
+
+\section{mgcp set debug off}
+\subsection{Summary}
+\begin{verbatim}
+Disable MGCP debugging
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: mgcp set debug off
+       Disables dumping of MGCP packets for debugging purposes
+
+\end{verbatim}
+
+
+\section{mgcp show endpoints}
+\subsection{Summary}
+\begin{verbatim}
+List defined MGCP endpoints
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: mgcp show endpoints
+       Lists all endpoints known to the MGCP (Media Gateway Control Protocol) subsystem.
+
+\end{verbatim}
+
+
+\section{minivm list accounts}
+\subsection{Summary}
+\begin{verbatim}
+List defined mini-voicemail boxes
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: minivm list accounts
+       Lists all mailboxes currently set up
+
+\end{verbatim}
+
+
+\section{minivm list templates}
+\subsection{Summary}
+\begin{verbatim}
+List message templates
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: minivm list templates
+       Lists message templates for e-mail, paging and IM
+
+\end{verbatim}
+
+
+\section{minivm list zones}
+\subsection{Summary}
+\begin{verbatim}
+List zone message formats
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: minivm list zones
+       Lists zone message formats
+
+\end{verbatim}
+
+
+\section{minivm reload}
+\subsection{Summary}
+\begin{verbatim}
+Reload Mini-voicemail configuration
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: minivm reload
+       Reload mini-voicemail configuration and reset statistics
+
+\end{verbatim}
+
+
+\section{minivm show settings}
+\subsection{Summary}
+\begin{verbatim}
+Show mini-voicemail general settings
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: minivm show settings
+       Display Mini-Voicemail general settings
+
+\end{verbatim}
+
+
+\section{minivm show stats}
+\subsection{Summary}
+\begin{verbatim}
+Show some mini-voicemail statistics
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: minivm show stats
+       Display Mini-Voicemail counters
+
+\end{verbatim}
+
+
+\section{mixmonitor}
+\subsection{Summary}
+\begin{verbatim}
+Execute a MixMonitor command.
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+mixmonitor <start|stop> <chan_name> [args]
+
+The optional arguments are passed to the
+MixMonitor application when the 'start' command is used.
+
+\end{verbatim}
+
+
+\section{module load}
+\subsection{Summary}
+\begin{verbatim}
+Load a module by name
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: module load <module name>
+       Loads the specified module into Asterisk.
+
+\end{verbatim}
+
+
+\section{module reload}
+\subsection{Summary}
+\begin{verbatim}
+Reload configuration
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: module reload [module ...]
+       Reloads configuration files for all listed modules which support
+       reloading, or for all supported modules if none are listed.
+
+\end{verbatim}
+
+
+\section{module show [like]}
+\subsection{Summary}
+\begin{verbatim}
+List modules and info
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: module show [like keyword]
+       Shows Asterisk modules currently in use, and usage statistics.
+
+\end{verbatim}
+
+
+\section{module unload}
+\subsection{Summary}
+\begin{verbatim}
+Unload a module by name
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: module unload [-f|-h] <module_1> [<module_2> ... ]
+       Unloads the specified module from Asterisk. The -f
+       option causes the module to be unloaded even if it is
+       in use (may cause a crash) and the -h module causes the
+       module to be unloaded even if the module says it cannot, 
+       which almost always will cause a crash.
+
+\end{verbatim}
+
+
+\section{moh reload}
+\subsection{Summary}
+\begin{verbatim}
+Music On Hold
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Music On Hold
+\end{verbatim}
+
+
+\section{moh show classes}
+\subsection{Summary}
+\begin{verbatim}
+List MOH classes
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Lists all MOH classes
+\end{verbatim}
+
+
+\section{moh show files}
+\subsection{Summary}
+\begin{verbatim}
+List MOH file-based classes
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Lists all loaded file-based MOH classes and their files
+\end{verbatim}
+
+
+\section{no debug channel}
+\subsection{Summary}
+\begin{verbatim}
+Disable debugging on channel(s)
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: core set debug channel <all|channel> [off]
+       Enables/disables debugging on all or on a specific channel.
+
+\end{verbatim}
+
+
+\section{odbc show}
+\subsection{Summary}
+\begin{verbatim}
+List ODBC DSN(s)
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: odbc show [<class>]
+       List settings of a particular ODBC class.
+       or, if not specified, all classes.
+
+\end{verbatim}
+
+
+\section{originate}
+\subsection{Summary}
+\begin{verbatim}
+Originate a call
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+  There are two ways to use this command. A call can be originated between a
+channel and a specific application, or between a channel and an extension in
+the dialplan. This is similar to call files or the manager originate action.
+Calls originated with this command are given a timeout of 30 seconds.
+
+Usage1: originate <tech/data> application <appname> [appdata]
+  This will originate a call between the specified channel tech/data and the
+given application. Arguments to the application are optional. If the given
+arguments to the application include spaces, all of the arguments to the
+application need to be placed in quotation marks.
+
+Usage2: originate <tech/data> extension [exten@][context]
+  This will originate a call between the specified channel tech/data and the
+given extension. If no context is specified, the 'default' context will be
+used. If no extension is given, the 's' extension will be used.
+
+\end{verbatim}
+
+
+\section{parkedcalls show}
+\subsection{Summary}
+\begin{verbatim}
+List currently parked calls
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: parkedcalls show
+       List currently parked calls
+
+\end{verbatim}
+
+
+\section{queue add member}
+\subsection{Summary}
+\begin{verbatim}
+Add a channel to a specified queue
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: queue add member <channel> to <queue> [penalty <penalty>]
+
+\end{verbatim}
+
+
+\section{queue remove member}
+\subsection{Summary}
+\begin{verbatim}
+Removes a channel from a specified queue
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: queue remove member <channel> from <queue>
+
+\end{verbatim}
+
+
+\section{queue show}
+\subsection{Summary}
+\begin{verbatim}
+Show status of a specified queue
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: queue show
+       Provides summary information on a specified queue.
+
+\end{verbatim}
+
+
+\section{realtime load}
+\subsection{Summary}
+\begin{verbatim}
+Used to print out RealTime variables.
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: realtime load <family> <colmatch> <value>
+       Prints out a list of variables using the RealTime driver.
+
+\end{verbatim}
+
+
+\section{realtime update}
+\subsection{Summary}
+\begin{verbatim}
+Used to update RealTime variables.
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: realtime update <family> <colmatch> <value>
+       Update a single variable using the RealTime driver.
+
+\end{verbatim}
+
+
+\section{restart gracefully}
+\subsection{Summary}
+\begin{verbatim}
+Restart Asterisk gracefully
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: restart gracefully
+       Causes Asterisk to stop accepting new calls and exec() itself performing a cold
+       restart when all active calls have ended.
+
+\end{verbatim}
+
+
+\section{restart now}
+\subsection{Summary}
+\begin{verbatim}
+Restart Asterisk immediately
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: restart now
+       Causes Asterisk to hangup all calls and exec() itself performing a cold
+       restart.
+
+\end{verbatim}
+
+
+\section{restart when convenient}
+\subsection{Summary}
+\begin{verbatim}
+Restart Asterisk at empty call volume
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: restart when convenient
+       Causes Asterisk to perform a cold restart when all active calls have ended.
+
+\end{verbatim}
+
+
+\section{rpt debug level}
+\subsection{Summary}
+\begin{verbatim}
+Enable app_rpt debugging
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: rpt debug level {0-7}
+       Enables debug messages in app_rpt
+
+\end{verbatim}
+
+
+\section{rpt dump}
+\subsection{Summary}
+\begin{verbatim}
+Dump app_rpt structs for debugging
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: rpt dump <nodename>
+       Dumps struct debug info to log
+
+\end{verbatim}
+
+
+\section{rpt lstats}
+\subsection{Summary}
+\begin{verbatim}
+Dump link statistics
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: rpt lstats <nodename>
+       Dumps link statistics to console
+
+\end{verbatim}
+
+
+\section{rpt reload}
+\subsection{Summary}
+\begin{verbatim}
+Reload app_rpt config
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: rpt reload
+       Reloads app_rpt running config parameters
+
+\end{verbatim}
+
+
+\section{rpt restart}
+\subsection{Summary}
+\begin{verbatim}
+Restart app_rpt
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: rpt restart
+       Restarts app_rpt
+
+\end{verbatim}
+
+
+\section{rpt stats}
+\subsection{Summary}
+\begin{verbatim}
+Dump node statistics
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: rpt stats <nodename>
+       Dumps node statistics to console
+
+\end{verbatim}
+
+
+\section{rtcp debug ip}
+\subsection{Summary}
+\begin{verbatim}
+Enable RTCP debugging on IP
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: rtcp debug [ip host[:port]]
+       Enable dumping of all RTCP packets to and from host.
+
+\end{verbatim}
+
+
+\section{rtcp debug}
+\subsection{Summary}
+\begin{verbatim}
+Enable RTCP debugging
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: rtcp debug [ip host[:port]]
+       Enable dumping of all RTCP packets to and from host.
+
+\end{verbatim}
+
+
+\section{rtcp debug off}
+\subsection{Summary}
+\begin{verbatim}
+Disable RTCP debugging
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: rtcp debug off
+       Disable all RTCP debugging
+
+\end{verbatim}
+
+
+\section{rtcp stats}
+\subsection{Summary}
+\begin{verbatim}
+Enable RTCP stats
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: rtcp stats
+       Enable dumping of RTCP stats.
+
+\end{verbatim}
+
+
+\section{rtcp stats off}
+\subsection{Summary}
+\begin{verbatim}
+Disable RTCP stats
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: rtcp stats off
+       Disable all RTCP stats
+
+\end{verbatim}
+
+
+\section{rtp debug ip}
+\subsection{Summary}
+\begin{verbatim}
+Enable RTP debugging on IP
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: rtp debug [ip host[:port]]
+       Enable dumping of all RTP packets to and from host.
+
+\end{verbatim}
+
+
+\section{rtp debug}
+\subsection{Summary}
+\begin{verbatim}
+Enable RTP debugging
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: rtp debug [ip host[:port]]
+       Enable dumping of all RTP packets to and from host.
+
+\end{verbatim}
+
+
+\section{rtp debug off}
+\subsection{Summary}
+\begin{verbatim}
+Disable RTP debugging
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: rtp debug off
+       Disable all RTP debugging
+
+\end{verbatim}
+
+
+\section{say load}
+\subsection{Summary}
+\begin{verbatim}
+set/show the say mode
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+say load new|old
+\end{verbatim}
+
+
+\section{sip history}
+\subsection{Summary}
+\begin{verbatim}
+Enable SIP history
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: sip history
+       Enables recording of SIP dialog history for debugging purposes.
+Use 'sip show history' to view the history of a call number.
+
+\end{verbatim}
+
+
+\section{sip history off}
+\subsection{Summary}
+\begin{verbatim}
+Disable SIP history
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: sip history off
+       Disables recording of SIP dialog history for debugging purposes
+
+\end{verbatim}
+
+
+\section{sip notify}
+\subsection{Summary}
+\begin{verbatim}
+Send a notify packet to a SIP peer
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: sip notify <type> <peer> [<peer>...]
+       Send a NOTIFY message to a SIP peer or peers
+       Message types are defined in sip_notify.conf
+
+\end{verbatim}
+
+
+\section{sip prune realtime}
+\subsection{Summary}
+\begin{verbatim}
+Prune cached Realtime object(s)
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: sip prune realtime [peer|user] [<name>|all|like <pattern>]
+       Prunes object(s) from the cache.
+       Optional regular expression pattern is used to filter the objects.
+
+\end{verbatim}
+
+
+\section{sip prune realtime peer}
+\subsection{Summary}
+\begin{verbatim}
+Prune cached Realtime peer(s)
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: sip prune realtime [peer|user] [<name>|all|like <pattern>]
+       Prunes object(s) from the cache.
+       Optional regular expression pattern is used to filter the objects.
+
+\end{verbatim}
+
+
+\section{sip prune realtime user}
+\subsection{Summary}
+\begin{verbatim}
+Prune cached Realtime user(s)
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: sip prune realtime [peer|user] [<name>|all|like <pattern>]
+       Prunes object(s) from the cache.
+       Optional regular expression pattern is used to filter the objects.
+
+\end{verbatim}
+
+
+\section{sip reload}
+\subsection{Summary}
+\begin{verbatim}
+Reload SIP configuration
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: sip reload
+       Reloads SIP configuration from sip.conf
+
+\end{verbatim}
+
+
+\section{sip set debug}
+\subsection{Summary}
+\begin{verbatim}
+Enable SIP debugging
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: sip set debug {on|off|ip <host[:PORT]>|peer <peername>}
+       sip set debug on
+          Enables dumping of all SIP messages for debugging purposes
+
+       sip set debug off
+          Disables dumping of all SIP messages
+
+       sip set debug ip <host[:PORT]>
+          Enables dumping of SIP messages to and from host.
+
+       sip set debug peer <peername>
+          Enables dumping of SIP messages to and from peer's IP.
+          Requires peer to be registered.
+
+\end{verbatim}
+
+
+\section{sip set debug ip}
+\subsection{Summary}
+\begin{verbatim}
+Enable SIP debugging on IP
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: sip set debug {on|off|ip <host[:PORT]>|peer <peername>}
+       sip set debug on
+          Enables dumping of all SIP messages for debugging purposes
+
+       sip set debug off
+          Disables dumping of all SIP messages
+
+       sip set debug ip <host[:PORT]>
+          Enables dumping of SIP messages to and from host.
+
+       sip set debug peer <peername>
+          Enables dumping of SIP messages to and from peer's IP.
+          Requires peer to be registered.
+
+\end{verbatim}
+
+
+\section{sip set debug off}
+\subsection{Summary}
+\begin{verbatim}
+Disable SIP debugging
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: sip set debug off
+       Disables dumping of SIP packets for debugging purposes
+
+\end{verbatim}
+
+
+\section{sip set debug on}
+\subsection{Summary}
+\begin{verbatim}
+Enable SIP debugging
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: sip set debug {on|off|ip <host[:PORT]>|peer <peername>}
+       sip set debug on
+          Enables dumping of all SIP messages for debugging purposes
+
+       sip set debug off
+          Disables dumping of all SIP messages
+
+       sip set debug ip <host[:PORT]>
+          Enables dumping of SIP messages to and from host.
+
+       sip set debug peer <peername>
+          Enables dumping of SIP messages to and from peer's IP.
+          Requires peer to be registered.
+
+\end{verbatim}
+
+
+\section{sip set debug peer}
+\subsection{Summary}
+\begin{verbatim}
+Enable SIP debugging on Peername
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: sip set debug {on|off|ip <host[:PORT]>|peer <peername>}
+       sip set debug on
+          Enables dumping of all SIP messages for debugging purposes
+
+       sip set debug off
+          Disables dumping of all SIP messages
+
+       sip set debug ip <host[:PORT]>
+          Enables dumping of SIP messages to and from host.
+
+       sip set debug peer <peername>
+          Enables dumping of SIP messages to and from peer's IP.
+          Requires peer to be registered.
+
+\end{verbatim}
+
+
+\section{sip show channels}
+\subsection{Summary}
+\begin{verbatim}
+List active SIP channels
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: sip show channels
+       Lists all currently active SIP channels.
+
+\end{verbatim}
+
+
+\section{sip show channel}
+\subsection{Summary}
+\begin{verbatim}
+Show detailed SIP channel info
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: sip show channel <channel>
+       Provides detailed status on a given SIP channel.
+
+\end{verbatim}
+
+
+\section{sip show domains}
+\subsection{Summary}
+\begin{verbatim}
+List our local SIP domains.
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: sip show domains
+       Lists all configured SIP local domains.
+       Asterisk only responds to SIP messages to local domains.
+
+\end{verbatim}
+
+
+\section{sip show history}
+\subsection{Summary}
+\begin{verbatim}
+Show SIP dialog history
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: sip show history <channel>
+       Provides detailed dialog history on a given SIP channel.
+
+\end{verbatim}
+
+
+\section{sip show inuse}
+\subsection{Summary}
+\begin{verbatim}
+List all inuse/limits
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: sip show inuse [all]
+       List all SIP users and peers usage counters and limits.
+       Add option "all" to show all devices, not only those with a limit.
+
+\end{verbatim}
+
+
+\section{sip show objects}
+\subsection{Summary}
+\begin{verbatim}
+List all SIP object allocations
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: sip show objects
+       Lists status of known SIP objects
+
+\end{verbatim}
+
+
+\section{sip show peers}
+\subsection{Summary}
+\begin{verbatim}
+List defined SIP peers
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: sip show peers [like <pattern>]
+       Lists all known SIP peers.
+       Optional regular expression pattern is used to filter the peer list.
+
+\end{verbatim}
+
+
+\section{sip show peer}
+\subsection{Summary}
+\begin{verbatim}
+Show details on specific SIP peer
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: sip show peer <name> [load]
+       Shows all details on one SIP peer and the current status.
+       Option "load" forces lookup of peer in realtime storage.
+
+\end{verbatim}
+
+
+\section{sip show registry}
+\subsection{Summary}
+\begin{verbatim}
+List SIP registration status
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: sip show registry
+       Lists all registration requests and status.
+
+\end{verbatim}
+
+
+\section{sip show settings}
+\subsection{Summary}
+\begin{verbatim}
+Show SIP global settings
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: sip show settings
+       Provides detailed list of the configuration of the SIP channel.
+
+\end{verbatim}
+
+
+\section{sip show subscriptions}
+\subsection{Summary}
+\begin{verbatim}
+List active SIP subscriptions
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: sip show subscriptions
+       Lists active SIP subscriptions for extension states
+
+\end{verbatim}
+
+
+\section{sip show users}
+\subsection{Summary}
+\begin{verbatim}
+List defined SIP users
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: sip show users [like <pattern>]
+       Lists all known SIP users.
+       Optional regular expression pattern is used to filter the user list.
+
+\end{verbatim}
+
+
+\section{sip show user}
+\subsection{Summary}
+\begin{verbatim}
+Show details on specific SIP user
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: sip show user <name> [load]
+       Shows all details on one SIP user and the current status.
+       Option "load" forces lookup of peer in realtime storage.
+
+\end{verbatim}
+
+
+\section{sip unregister}
+\subsection{Summary}
+\begin{verbatim}
+Unregister (force expiration) a SIP peer from the registery
+
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: sip unregister <peer>
+       Unregister (force expiration) a SIP peer from the registry
+
+\end{verbatim}
+
+
+\section{skinny reset}
+\subsection{Summary}
+\begin{verbatim}
+Reset Skinny device(s)
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: skinny reset <DeviceId|all> [restart]
+       Causes a Skinny device to reset itself, optionally with a full restart
+
+\end{verbatim}
+
+
+\section{skinny set debug}
+\subsection{Summary}
+\begin{verbatim}
+Enable Skinny debugging
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: skinny set debug
+       Enables dumping of Skinny packets for debugging purposes
+
+\end{verbatim}
+
+
+\section{skinny set debug off}
+\subsection{Summary}
+\begin{verbatim}
+Disable Skinny debugging
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: skinny set debug off
+       Disables dumping of Skinny packets for debugging purposes
+
+\end{verbatim}
+
+
+\section{skinny show devices}
+\subsection{Summary}
+\begin{verbatim}
+List defined Skinny devices
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: skinny show devices
+       Lists all devices known to the Skinny subsystem.
+
+\end{verbatim}
+
+
+\section{skinny show lines}
+\subsection{Summary}
+\begin{verbatim}
+List defined Skinny lines per device
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: skinny show lines
+       Lists all lines known to the Skinny subsystem.
+
+\end{verbatim}
+
+
+\section{sla show stations}
+\subsection{Summary}
+\begin{verbatim}
+Show SLA Stations
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: sla show stations
+       This will list all stations defined in sla.conf
+
+\end{verbatim}
+
+
+\section{sla show trunks}
+\subsection{Summary}
+\begin{verbatim}
+Show SLA Trunks
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: sla show trunks
+       This will list all trunks defined in sla.conf
+
+\end{verbatim}
+
+
+\section{soft hangup}
+\subsection{Summary}
+\begin{verbatim}
+Request a hangup on a given channel
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: soft hangup <channel>
+       Request that a channel be hung up. The hangup takes effect
+       the next time the driver reads or writes from the channel
+
+\end{verbatim}
+
+
+\section{stop gracefully}
+\subsection{Summary}
+\begin{verbatim}
+Gracefully shut down Asterisk
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: stop gracefully
+       Causes Asterisk to not accept new calls, and exit when all
+       active calls have terminated normally.
+
+\end{verbatim}
+
+
+\section{stop now}
+\subsection{Summary}
+\begin{verbatim}
+Shut down Asterisk immediately
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: stop now
+       Shuts down a running Asterisk immediately, hanging up all active calls .
+
+\end{verbatim}
+
+
+\section{stop when convenient}
+\subsection{Summary}
+\begin{verbatim}
+Shut down Asterisk at empty call volume
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: stop when convenient
+       Causes Asterisk to perform a shutdown when all active calls have ended.
+
+\end{verbatim}
+
+
+\section{stun debug}
+\subsection{Summary}
+\begin{verbatim}
+Enable STUN debugging
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: stun debug
+       Enable STUN (Simple Traversal of UDP through NATs) debugging
+
+\end{verbatim}
+
+
+\section{stun debug off}
+\subsection{Summary}
+\begin{verbatim}
+Disable STUN debugging
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: stun debug off
+       Disable STUN debugging
+
+\end{verbatim}
+
+
+\section{udptl debug}
+\subsection{Summary}
+\begin{verbatim}
+Enable UDPTL debugging
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: udptl debug [ip host[:port]]
+       Enable dumping of all UDPTL packets to and from host.
+
+\end{verbatim}
+
+
+\section{udptl debug ip}
+\subsection{Summary}
+\begin{verbatim}
+Enable UDPTL debugging on IP
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: udptl debug [ip host[:port]]
+       Enable dumping of all UDPTL packets to and from host.
+
+\end{verbatim}
+
+
+\section{udptl debug off}
+\subsection{Summary}
+\begin{verbatim}
+Disable UDPTL debugging
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: udptl debug off
+       Disable all UDPTL debugging
+
+\end{verbatim}
+
+
+\section{ulimit}
+\subsection{Summary}
+\begin{verbatim}
+Set or show process resource limits
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: ulimit {-d|-l|-f|-m|-s|-t|-u|-v|-c|-n} [<num>]
+       Shows or sets the corresponding resource limit.
+         -d  Process data segment [readonly]
+         -l  Memory lock size [readonly]
+         -f  File size
+         -m  Process resident memory [readonly]
+         -s  Process stack size [readonly]
+         -t  CPU usage [readonly]
+         -u  Child processes
+         -v  Process virtual memory [readonly]
+         -c  Core dump file size
+         -n  Number of file descriptors
+
+\end{verbatim}
+
+
+\section{voicemail show users}
+\subsection{Summary}
+\begin{verbatim}
+List defined voicemail boxes
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: voicemail show users [for <context>]
+       Lists all mailboxes currently set up
+
+\end{verbatim}
+
+
+\section{voicemail show zones}
+\subsection{Summary}
+\begin{verbatim}
+List zone message formats
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: voicemail show zones
+       Lists zone message formats
+
+\end{verbatim}
+
+
+\section{zap destroy channel}
+\subsection{Summary}
+\begin{verbatim}
+Destroy a channel
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: zap destroy channel <chan num>
+	DON'T USE THIS UNLESS YOU KNOW WHAT YOU ARE DOING.  Immediately removes a given channel, whether it is in use or not
+
+\end{verbatim}
+
+
+\section{zap restart}
+\subsection{Summary}
+\begin{verbatim}
+Fully restart zaptel channels
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: zap restart
+	Restarts the zaptel channels: destroys them all and then
+	re-reads them from zapata.conf.
+	Note that this will STOP any running CALL on zaptel channels.
+
+\end{verbatim}
+
+
+\section{zap show cadences}
+\subsection{Summary}
+\begin{verbatim}
+List cadences
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: zap show cadences
+       Shows all cadences currently defined
+
+\end{verbatim}
+
+
+\section{zap show channels}
+\subsection{Summary}
+\begin{verbatim}
+Show active zapata channels
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: zap show channels [ trunkgroup <trunkgroup> | group <group> | context <context> ]
+	Shows a list of available channels with optional filtering
+	<group> must be a number between 0 and 63
+
+\end{verbatim}
+
+
+\section{zap show channel}
+\subsection{Summary}
+\begin{verbatim}
+Show information on a channel
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: zap show channel <chan num>
+	Detailed information about a given channel
+
+\end{verbatim}
+
+
+\section{zap show status}
+\subsection{Summary}
+\begin{verbatim}
+Show all Zaptel cards status
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: zap show status
+       Shows a list of Zaptel cards with status
+
+\end{verbatim}
+
+
+\section{zap show version}
+\subsection{Summary}
+\begin{verbatim}
+Show the Zaptel version in use
+\end{verbatim}
+\subsection{Usage}
+\begin{verbatim}
+Usage: zap show version
+       Shows the Zaptel version in use
+
+\end{verbatim}
+
+
diff --git a/doc/asterisk.tex b/doc/asterisk.tex
index dc495bf80..10ad7f039 100644
--- a/doc/asterisk.tex
+++ b/doc/asterisk.tex
@@ -108,6 +108,11 @@ reference purposes.
   \section{Queue Logs}
   \input{queuelog.tex}
 
+% Generate this using the "core dump clidocs" CLI command that is present
+% when Asterisk is built with dev-mode enabled.
+\chapter{CLI Command Reference}
+\input{ast_cli_commands.tex}
+
 % Generate this using the "core dump appdocs" CLI command that is present
 % when Asterisk is built with dev-mode enabled.
 \chapter{Dialplan Application Reference}