diff options
author | kpfleming <kpfleming@f38db490-d61c-443f-a65b-d21fe96a405b> | 2008-07-28 16:49:18 +0000 |
---|---|---|
committer | kpfleming <kpfleming@f38db490-d61c-443f-a65b-d21fe96a405b> | 2008-07-28 16:49:18 +0000 |
commit | 02b6d501ac4ec8afa68343fd7eba07c871def467 (patch) | |
tree | c260b454ee36057daa09da1d6ddef150eb246521 /doc/ss7.txt | |
parent | 8c653dc5c125614f66b4d353e2187e3e0c4ea215 (diff) |
Merged revisions 134086 via svnmerge from
https://origsvn.digium.com/svn/asterisk/trunk
........
r134086 | kpfleming | 2008-07-28 11:42:00 -0500 (Mon, 28 Jul 2008) | 3 lines
remove remaining Zaptel references in various places
........
git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.6.0@134087 f38db490-d61c-443f-a65b-d21fe96a405b
Diffstat (limited to 'doc/ss7.txt')
-rw-r--r-- | doc/ss7.txt | 14 |
1 files changed, 7 insertions, 7 deletions
diff --git a/doc/ss7.txt b/doc/ss7.txt index 94d01a0b0..0e4bb0bc5 100644 --- a/doc/ss7.txt +++ b/doc/ss7.txt @@ -79,25 +79,25 @@ defaultdpc = 3 ; The point code of the switch you want to send your ISUP ; Now we configure our Bearer channels (CICs) -cicbeginswith = 1 ; Number to start counting the CICs from. So if Zap/1 to - ; Zap/15 are CICs 1-15, you would set this to 1 before you +cicbeginswith = 1 ; Number to start counting the CICs from. So if DAHDI/1 to + ; DAHDI/15 are CICs 1-15, you would set this to 1 before you ; declare channel=1-15 -channel=1-15 ; Use Zap/1-15 and assign them to CICs 1-15 +channel=1-15 ; Use DAHDI/1-15 and assign them to CICs 1-15 -cicbeginswith = 17 ; Now for Zap/17 to Zap/31, they are CICs 17-31 so we initialize +cicbeginswith = 17 ; Now for DAHDI/17 to DAHDI/31, they are CICs 17-31 so we initialize ; cicbeginswith to 17 before we declare those channels channel = 17-31 ; This assigns CICs 17-31 to channels 17-31 -sigchan = 16 ; This is where you declare which Zap channel is your signalling - ; channel. In our case it is Zap/16. You can add redundant +sigchan = 16 ; This is where you declare which DAHDI channel is your signalling + ; channel. In our case it is DAHDI/16. You can add redundant ; signalling channels by adding additional sigchan= lines. ; If we want an alternate redundant signalling channel add this sigchan = 48 ; This would put two signalling channels in our linkset, one at - ; Zap/16 and one at Zap/48 which both would be used to send/receive + ; DAHDI/16 and one at DAHDI/48 which both would be used to send/receive ; ISUP traffic. ; End of chan_dahdi.conf |