check specifically for VLDTMF and transcoding support in the system's Zaptel installation, and make only the modules that need those features dependent on them (this will allow building the other Zaptel-using parts of Asterisk against older versions of Zaptel or those on other platforms that haven't caught up yet to the Linux version)

git-svn-id: http://svn.digium.com/svn/asterisk/branches/1.4@49102 f38db490-d61c-443f-a65b-d21fe96a405b

1 files changed, 86 insertions, 32 deletions

diff --git a/configure b/configure
index c93b02eba..24de57fd6 100755
--- a/configure
+++ b/configure
@@ -1,5 +1,5 @@
 #! /bin/sh
-# From configure.ac Revision: 48960 .
+# From configure.ac Revision: 49022 .
 # Guess values for system-dependent variables and create Makefiles.
 # Generated by GNU Autoconf 2.61.
 #
@@ -844,6 +844,8 @@ OPENH323_LIBDIR
 OPENH323_SUFFIX
 OPENH323_BUILD
 QTMOC
+PBX_ZAPTEL_VLDTMF
+PBX_ZAPTEL_TRANSCODE
 EDITLINE_LIB
 PBX_H323
 PBX_IXJUSER
@@ -28356,8 +28358,8 @@ fi
 
 
 if test "${USE_ZAPTEL}" != "no"; then
-   { echo "$as_me:$LINENO: checking for ZT_TONE_DTMF_BASE in zaptel.h" >&5
-echo $ECHO_N "checking for ZT_TONE_DTMF_BASE in zaptel.h... $ECHO_C" >&6; }
+   { echo "$as_me:$LINENO: checking for ZT_DIAL_OP_CANCEL in zaptel/zaptel.h" >&5
+echo $ECHO_N "checking for ZT_DIAL_OP_CANCEL in zaptel/zaptel.h... $ECHO_C" >&6; }
    saved_cppflags="${CPPFLAGS}"
    if test "x${ZAPTEL_DIR}" != "x"; then
       CPPFLAGS="${CPPFLAGS} -I${ZAPTEL_DIR}/include"
@@ -28373,7 +28375,7 @@ cat >>conftest.$ac_ext <<_ACEOF
 int
 main ()
 {
-int foo = ZT_TONE_DTMF_BASE;
+int foo = ZT_DIAL_OP_CANCEL;
   ;
   return 0;
 }
@@ -28437,26 +28439,25 @@ echo "$as_me: *** including --without-zaptel." >&6;}
    fi
 fi
 
-if test "${USE_ZAPTEL}" != "no"; then
-   if test "${PBX_ZAPTEL}" != "1"; then
-      { echo "$as_me:$LINENO: checking for ZT_DIAL_OP_CANCEL in zaptel.h" >&5
-echo $ECHO_N "checking for ZT_DIAL_OP_CANCEL in zaptel.h... $ECHO_C" >&6; }
-      saved_cppflags="${CPPFLAGS}"
-      if test "x${ZAPTEL_DIR}" != "x"; then
-	 CPPFLAGS="${CPPFLAGS} -I${ZAPTEL_DIR}/include"
-      fi
-      cat >conftest.$ac_ext <<_ACEOF
+if test "${PBX_ZAPTEL}" = 1; then
+   { echo "$as_me:$LINENO: checking for ZT_TONE_DTMF_BASE in zaptel/zaptel.h" >&5
+echo $ECHO_N "checking for ZT_TONE_DTMF_BASE in zaptel/zaptel.h... $ECHO_C" >&6; }
+   saved_cppflags="${CPPFLAGS}"
+   if test "x${ZAPTEL_DIR}" != "x"; then
+      CPPFLAGS="${CPPFLAGS} -I${ZAPTEL_DIR}/include"
+   fi
+   cat >conftest.$ac_ext <<_ACEOF
 
 	/* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
-#include <zaptel.h>
+#include <zaptel/zaptel.h>
 int
 main ()
 {
-int foo = ZT_DIAL_OP_CANCEL;
+int foo = ZT_TONE_DTMF_BASE;
   ;
   return 0;
 }
@@ -28481,7 +28482,7 @@ eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
        } && test -s conftest.$ac_objext; then
   	{ echo "$as_me:$LINENO: result: yes" >&5
 echo "${ECHO_T}yes" >&6; }
-		ac_cv_zaptel_h="yes"
+		ac_cv_zaptel_vldtmf="yes"
 
 else
   echo "$as_me: failed program was:" >&5
@@ -28489,29 +28490,80 @@ sed 's/^/| /' conftest.$ac_ext >&5
 
 		{ echo "$as_me:$LINENO: result: no" >&5
 echo "${ECHO_T}no" >&6; }
-		ac_cv_zaptel_h="no"
+		ac_cv_zaptel_vldtmf="no"
 
 
 fi
 
 rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-      CPPFLAGS="${saved_cppflags}"
-      if test "${ac_cv_zaptel_h}" = "yes"; then
-         { echo "$as_me:$LINENO: ***" >&5
-echo "$as_me: ***" >&6;}
-	 { echo "$as_me:$LINENO: *** The Zaptel installation on this system is too old" >&5
-echo "$as_me: *** The Zaptel installation on this system is too old" >&6;}
-	 { echo "$as_me:$LINENO: *** to be useable with this version of Asterisk." >&5
-echo "$as_me: *** to be useable with this version of Asterisk." >&6;}
-	 { echo "$as_me:$LINENO: *** Either upgrade your Zaptel installation, or run configure" >&5
-echo "$as_me: *** Either upgrade your Zaptel installation, or run configure" >&6;}
-	 { echo "$as_me:$LINENO: *** including --without-zaptel." >&5
-echo "$as_me: *** including --without-zaptel." >&6;}
-	 exit 1
-      fi
+   CPPFLAGS="${saved_cppflags}"
+   if test "${ac_cv_zaptel_vldtmf}" = "yes"; then
+	PBX_ZAPTEL_VLDTMF=1
+   fi
+   { echo "$as_me:$LINENO: checking for ZT_TCOP_TRANSCODE in zaptel/zaptel.h" >&5
+echo $ECHO_N "checking for ZT_TCOP_TRANSCODE in zaptel/zaptel.h... $ECHO_C" >&6; }
+   saved_cppflags="${CPPFLAGS}"
+   if test "x${ZAPTEL_DIR}" != "x"; then
+      CPPFLAGS="${CPPFLAGS} -I${ZAPTEL_DIR}/include"
    fi
+   cat >conftest.$ac_ext <<_ACEOF
+
+	/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <zaptel/zaptel.h>
+int
+main ()
+{
+int foo = ZT_TCOP_TRANSCODE;
+  ;
+  return 0;
+}
+
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
+  	{ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6; }
+		ac_cv_zaptel_transcode="yes"
+
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+		{ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+		ac_cv_zaptel_transcode="no"
+
+
 fi
 
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+   CPPFLAGS="${saved_cppflags}"
+   if test "${ac_cv_zaptel_transcode}" = "yes"; then
+	PBX_ZAPTEL_TRANSCODE=1
+   fi
+fi
+
+
+
 EDITLINE_LIB=""
 if test "x$TERMCAP_LIB" != "x" ; then
   EDITLINE_LIB="$TERMCAP_LIB"
@@ -29876,6 +29928,8 @@ OPENH323_LIBDIR!$OPENH323_LIBDIR$ac_delim
 OPENH323_SUFFIX!$OPENH323_SUFFIX$ac_delim
 OPENH323_BUILD!$OPENH323_BUILD$ac_delim
 QTMOC!$QTMOC$ac_delim
+PBX_ZAPTEL_VLDTMF!$PBX_ZAPTEL_VLDTMF$ac_delim
+PBX_ZAPTEL_TRANSCODE!$PBX_ZAPTEL_TRANSCODE$ac_delim
 EDITLINE_LIB!$EDITLINE_LIB$ac_delim
 PBX_H323!$PBX_H323$ac_delim
 PBX_IXJUSER!$PBX_IXJUSER$ac_delim
@@ -29887,7 +29941,7 @@ CURL!$CURL$ac_delim
 LTLIBOBJS!$LTLIBOBJS$ac_delim
 _ACEOF
 
-  if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 40; then
+  if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 42; then
     break
   elif $ac_last_try; then
     { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5