Remove a bunch of trailing whitespace in preparation for reformatting/cleanup.

Let's try that again, this time removing trailing whitespace and not leading
whitespace.  I can't believe no one noticed.


git-svn-id: http://svn.digium.com/svn/asterisk/trunk@197535 f38db490-d61c-443f-a65b-d21fe96a405b

1 files changed, 55 insertions, 55 deletions

diff --git a/configs/sla.conf.sample b/configs/sla.conf.sample
index 9fdb3f336..c2015b622 100644
--- a/configs/sla.conf.sample
+++ b/configs/sla.conf.sample
@@ -8,10 +8,10 @@
 [general]
 
 ;attemptcallerid=no         ; Attempt CallerID handling.  The default value for this
-; is "no" because CallerID handling with an SLA setup is
-; known to not work properly in some situations.  However,
-; feel free to enable it if you would like.  If you do, and
-; you find problems, please do not report them.
+                            ; is "no" because CallerID handling with an SLA setup is
+                            ; known to not work properly in some situations.  However,
+                            ; feel free to enable it if you would like.  If you do, and
+                            ; you find problems, please do not report them.
 ; -------------------------------------
 
 
@@ -22,30 +22,30 @@
 ;type=trunk                 ; This line is what marks this entry as a trunk.
 
 ;device=DAHDI/3               ; Map this trunk declaration to a specific device.
-; NOTE: You can not just put any type of channel here.
-;       DAHDI channels can be directly used.  IP trunks
-;       require some indirect configuration which is
-;       described in doc/asterisk.pdf.
+                            ; NOTE: You can not just put any type of channel here.
+                            ;       DAHDI channels can be directly used.  IP trunks
+                            ;       require some indirect configuration which is
+                            ;       described in doc/asterisk.pdf.
 
-;autocontext=line1          ; This supports automatic generation of the dialplan entries 
-; if the autocontext option is used.  Each trunk should have 
-; a unique context name.  Then, in chan_dahdi.conf, this device
-; should be configured to have incoming calls go to this context.
+;autocontext=line1          ; This supports automatic generation of the dialplan entries
+                            ; if the autocontext option is used.  Each trunk should have
+                            ; a unique context name.  Then, in chan_dahdi.conf, this device
+                            ; should be configured to have incoming calls go to this context.
 
-;ringtimeout=30             ; Set how long to allow this trunk to ring on an inbound call before hanging 
-; it up as an unanswered call.  The value is in seconds.
+;ringtimeout=30             ; Set how long to allow this trunk to ring on an inbound call before hanging
+                            ; it up as an unanswered call.  The value is in seconds.
 
 ;barge=no                   ; If this option is set to "no", then no station will be
-; allowed to join a call that is in progress.  The default
-; value is "yes".
+                            ; allowed to join a call that is in progress.  The default
+                            ; value is "yes".
 
 ;hold=private               ; This option configure hold permissions for this trunk.
-;   "open"    - This means that any station can put this trunk
-;               on hold, and any station can retrieve it from
-;               hold.  This is the default.
-;   "private" - This means that once a station puts the
-;               trunk on hold, no other station will be
-;               allowed to retrieve the call from hold.
+                            ;   "open"    - This means that any station can put this trunk
+                            ;               on hold, and any station can retrieve it from
+                            ;               hold.  This is the default.
+                            ;   "private" - This means that once a station puts the
+                            ;               trunk on hold, no other station will be
+                            ;               allowed to retrieve the call from hold.
 
 ;[line2]
 ;type=trunk
@@ -60,9 +60,9 @@
 ;[line4]
 ;type=trunk
 ;device=Local/disa@line4_outbound ; A Local channel in combination with the Disa
-; application can be used to support IP trunks.
-; See doc/asterisk.pdf on more information on how
-; IP trunks work.
+                                  ; application can be used to support IP trunks.
+                                  ; See doc/asterisk.pdf on more information on how
+                                  ; IP trunks work.
 ;autocontext=line4
 ; --------------------------------------
 
@@ -75,55 +75,55 @@
 
 ;device=SIP/station1        ; Each station must be mapped to a device.
 
-;autocontext=sla_stations   ; This supports automatic generation of the dialplan entries if 
-; the autocontext option is used.  All stations can use the same 
-; context without conflict.  The device for this station should 
-; have its context configured to the same one listed here.
+;autocontext=sla_stations   ; This supports automatic generation of the dialplan entries if
+                            ; the autocontext option is used.  All stations can use the same
+                            ; context without conflict.  The device for this station should
+                            ; have its context configured to the same one listed here.
 
-;ringtimeout=10             ; Set a timeout for how long to allow the station to ring for an 
-; incoming call, in seconds.
+;ringtimeout=10             ; Set a timeout for how long to allow the station to ring for an
+                            ; incoming call, in seconds.
 
 ;ringdelay=10               ; Set a time for how long to wait before beginning to ring this station
-; once there is an incoming call, in seconds.
+                            ; once there is an incoming call, in seconds.
 
 ;hold=private               ; This option configure hold permissions for this station.  Note
-; that if private hold is set in the trunk entry, that will override
-; anything here.  However, if a trunk has open hold access, but this
-; station is set to private hold, then the private hold will be in
-; effect.
-;   "open"    - This means that once this station puts a call
-;               on hold, any other station is allowed to retrieve
-;               it.  This is the default.
-;   "private" - This means that once this station puts a
-;               call on hold, no other station will be
-;               allowed to retrieve the call from hold.
+                            ; that if private hold is set in the trunk entry, that will override
+                            ; anything here.  However, if a trunk has open hold access, but this
+                            ; station is set to private hold, then the private hold will be in
+                            ; effect.
+                            ;   "open"    - This means that once this station puts a call
+                            ;               on hold, any other station is allowed to retrieve
+                            ;               it.  This is the default.
+                            ;   "private" - This means that once this station puts a
+                            ;               call on hold, no other station will be
+                            ;               allowed to retrieve the call from hold.
 
 
 ;trunk=line1                ; Individually list all of the trunks that will appear on this station.  This
-; order is significant.  It should be the same order as they appear on the
-; phone.  The order here defines the order of preference that the trunks will
-; be used.
+                            ; order is significant.  It should be the same order as they appear on the
+                            ; phone.  The order here defines the order of preference that the trunks will
+                            ; be used.
 ;trunk=line2
 ;trunk=line3,ringdelay=5    ; A ring delay for the station can also be specified for a specific trunk.
-; If a ring delay is specified both for the whole station and for a specific
-; trunk on a station, the setting for the specific trunk will take priority.
-; This value is in seconds.
+                            ; If a ring delay is specified both for the whole station and for a specific
+                            ; trunk on a station, the setting for the specific trunk will take priority.
+                            ; This value is in seconds.
 
 ;trunk=line4,ringtimeout=5  ; A ring timeout for the station can also be specified for a specific trunk.
-; If a ring timeout is specified both for the whole station and for a specific
-; trunk on a station, the setting for the specific trunk will take priority.
-; This value is in seconds.
+                            ; If a ring timeout is specified both for the whole station and for a specific
+                            ; trunk on a station, the setting for the specific trunk will take priority.
+                            ; This value is in seconds.
 
 
 ;[station](!)               ; When there are a lot of stations that are configured the same way,
-; it is convenient to use a configuration template like this so that
-; the common settings stay in one place.
+                            ; it is convenient to use a configuration template like this so that
+                            ; the common settings stay in one place.
 ;type=station
 ;autocontext=sla_stations
 ;trunk=line1
-;trunk=line2 
+;trunk=line2
 ;trunk=line3
-;trunk=line4 
+;trunk=line4
 
 ;[station2](station)        ; Define a station that uses the configuration from the template "station".
 ;device=SIP/station2