diff options
author | seanbright <seanbright@f38db490-d61c-443f-a65b-d21fe96a405b> | 2009-05-28 14:39:21 +0000 |
---|---|---|
committer | seanbright <seanbright@f38db490-d61c-443f-a65b-d21fe96a405b> | 2009-05-28 14:39:21 +0000 |
commit | a22b4735e5a6b8745a4915a260995886c56c7ffe (patch) | |
tree | 2e8e77235c0fb39f0551db5e6012057fc8c580d0 /configs/sla.conf.sample | |
parent | 7f7cfd42e9d0e77e3d1ea18732595c1794bf46ea (diff) |
Remove a bunch of trailing whitespace in preparation for reformatting/cleanup.
Let's try that again, this time removing trailing whitespace and not leading
whitespace. I can't believe no one noticed.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@197535 f38db490-d61c-443f-a65b-d21fe96a405b
Diffstat (limited to 'configs/sla.conf.sample')
-rw-r--r-- | configs/sla.conf.sample | 110 |
1 files changed, 55 insertions, 55 deletions
diff --git a/configs/sla.conf.sample b/configs/sla.conf.sample index 9fdb3f336..c2015b622 100644 --- a/configs/sla.conf.sample +++ b/configs/sla.conf.sample @@ -8,10 +8,10 @@ [general] ;attemptcallerid=no ; Attempt CallerID handling. The default value for this -; is "no" because CallerID handling with an SLA setup is -; known to not work properly in some situations. However, -; feel free to enable it if you would like. If you do, and -; you find problems, please do not report them. + ; is "no" because CallerID handling with an SLA setup is + ; known to not work properly in some situations. However, + ; feel free to enable it if you would like. If you do, and + ; you find problems, please do not report them. ; ------------------------------------- @@ -22,30 +22,30 @@ ;type=trunk ; This line is what marks this entry as a trunk. ;device=DAHDI/3 ; Map this trunk declaration to a specific device. -; NOTE: You can not just put any type of channel here. -; DAHDI channels can be directly used. IP trunks -; require some indirect configuration which is -; described in doc/asterisk.pdf. + ; NOTE: You can not just put any type of channel here. + ; DAHDI channels can be directly used. IP trunks + ; require some indirect configuration which is + ; described in doc/asterisk.pdf. -;autocontext=line1 ; This supports automatic generation of the dialplan entries -; if the autocontext option is used. Each trunk should have -; a unique context name. Then, in chan_dahdi.conf, this device -; should be configured to have incoming calls go to this context. +;autocontext=line1 ; This supports automatic generation of the dialplan entries + ; if the autocontext option is used. Each trunk should have + ; a unique context name. Then, in chan_dahdi.conf, this device + ; should be configured to have incoming calls go to this context. -;ringtimeout=30 ; Set how long to allow this trunk to ring on an inbound call before hanging -; it up as an unanswered call. The value is in seconds. +;ringtimeout=30 ; Set how long to allow this trunk to ring on an inbound call before hanging + ; it up as an unanswered call. The value is in seconds. ;barge=no ; If this option is set to "no", then no station will be -; allowed to join a call that is in progress. The default -; value is "yes". + ; allowed to join a call that is in progress. The default + ; value is "yes". ;hold=private ; This option configure hold permissions for this trunk. -; "open" - This means that any station can put this trunk -; on hold, and any station can retrieve it from -; hold. This is the default. -; "private" - This means that once a station puts the -; trunk on hold, no other station will be -; allowed to retrieve the call from hold. + ; "open" - This means that any station can put this trunk + ; on hold, and any station can retrieve it from + ; hold. This is the default. + ; "private" - This means that once a station puts the + ; trunk on hold, no other station will be + ; allowed to retrieve the call from hold. ;[line2] ;type=trunk @@ -60,9 +60,9 @@ ;[line4] ;type=trunk ;device=Local/disa@line4_outbound ; A Local channel in combination with the Disa -; application can be used to support IP trunks. -; See doc/asterisk.pdf on more information on how -; IP trunks work. + ; application can be used to support IP trunks. + ; See doc/asterisk.pdf on more information on how + ; IP trunks work. ;autocontext=line4 ; -------------------------------------- @@ -75,55 +75,55 @@ ;device=SIP/station1 ; Each station must be mapped to a device. -;autocontext=sla_stations ; This supports automatic generation of the dialplan entries if -; the autocontext option is used. All stations can use the same -; context without conflict. The device for this station should -; have its context configured to the same one listed here. +;autocontext=sla_stations ; This supports automatic generation of the dialplan entries if + ; the autocontext option is used. All stations can use the same + ; context without conflict. The device for this station should + ; have its context configured to the same one listed here. -;ringtimeout=10 ; Set a timeout for how long to allow the station to ring for an -; incoming call, in seconds. +;ringtimeout=10 ; Set a timeout for how long to allow the station to ring for an + ; incoming call, in seconds. ;ringdelay=10 ; Set a time for how long to wait before beginning to ring this station -; once there is an incoming call, in seconds. + ; once there is an incoming call, in seconds. ;hold=private ; This option configure hold permissions for this station. Note -; that if private hold is set in the trunk entry, that will override -; anything here. However, if a trunk has open hold access, but this -; station is set to private hold, then the private hold will be in -; effect. -; "open" - This means that once this station puts a call -; on hold, any other station is allowed to retrieve -; it. This is the default. -; "private" - This means that once this station puts a -; call on hold, no other station will be -; allowed to retrieve the call from hold. + ; that if private hold is set in the trunk entry, that will override + ; anything here. However, if a trunk has open hold access, but this + ; station is set to private hold, then the private hold will be in + ; effect. + ; "open" - This means that once this station puts a call + ; on hold, any other station is allowed to retrieve + ; it. This is the default. + ; "private" - This means that once this station puts a + ; call on hold, no other station will be + ; allowed to retrieve the call from hold. ;trunk=line1 ; Individually list all of the trunks that will appear on this station. This -; order is significant. It should be the same order as they appear on the -; phone. The order here defines the order of preference that the trunks will -; be used. + ; order is significant. It should be the same order as they appear on the + ; phone. The order here defines the order of preference that the trunks will + ; be used. ;trunk=line2 ;trunk=line3,ringdelay=5 ; A ring delay for the station can also be specified for a specific trunk. -; If a ring delay is specified both for the whole station and for a specific -; trunk on a station, the setting for the specific trunk will take priority. -; This value is in seconds. + ; If a ring delay is specified both for the whole station and for a specific + ; trunk on a station, the setting for the specific trunk will take priority. + ; This value is in seconds. ;trunk=line4,ringtimeout=5 ; A ring timeout for the station can also be specified for a specific trunk. -; If a ring timeout is specified both for the whole station and for a specific -; trunk on a station, the setting for the specific trunk will take priority. -; This value is in seconds. + ; If a ring timeout is specified both for the whole station and for a specific + ; trunk on a station, the setting for the specific trunk will take priority. + ; This value is in seconds. ;[station](!) ; When there are a lot of stations that are configured the same way, -; it is convenient to use a configuration template like this so that -; the common settings stay in one place. + ; it is convenient to use a configuration template like this so that + ; the common settings stay in one place. ;type=station ;autocontext=sla_stations ;trunk=line1 -;trunk=line2 +;trunk=line2 ;trunk=line3 -;trunk=line4 +;trunk=line4 ;[station2](station) ; Define a station that uses the configuration from the template "station". ;device=SIP/station2 |