Remove a bunch of trailing whitespace in preparation for reformatting/cleanup.

Let's try that again, this time removing trailing whitespace and not leading
whitespace.  I can't believe no one noticed.


git-svn-id: http://svn.digium.com/svn/asterisk/trunk@197535 f38db490-d61c-443f-a65b-d21fe96a405b

1 files changed, 32 insertions, 32 deletions

diff --git a/configs/mgcp.conf.sample b/configs/mgcp.conf.sample
index 01c8fe77c..116b66cd0 100644
--- a/configs/mgcp.conf.sample
+++ b/configs/mgcp.conf.sample
@@ -13,27 +13,27 @@
 
 ;------------------------------ JITTER BUFFER CONFIGURATION --------------------------
 ; jbenable = yes              ; Enables the use of a jitterbuffer on the receiving side of a
-; MGCP channel. Defaults to "no". An enabled jitterbuffer will
-; be used only if the sending side can create and the receiving
-; side can not accept jitter. The MGCP channel can accept jitter,
-; thus an enabled jitterbuffer on the receive MGCP side will only
-; be used if the sending side can create jitter and jbforce is
-; also set to yes.
+                              ; MGCP channel. Defaults to "no". An enabled jitterbuffer will
+                              ; be used only if the sending side can create and the receiving
+                              ; side can not accept jitter. The MGCP channel can accept jitter,
+                              ; thus an enabled jitterbuffer on the receive MGCP side will only
+                              ; be used if the sending side can create jitter and jbforce is
+                              ; also set to yes.
 
 ; jbforce = no                ; Forces the use of a jitterbuffer on the receive side of a MGCP
-; channel. Defaults to "no".
+                              ; channel. Defaults to "no".
 
 ; jbmaxsize = 200             ; Max length of the jitterbuffer in milliseconds.
 
 ; jbresyncthreshold = 1000    ; Jump in the frame timestamps over which the jitterbuffer is
-; resynchronized. Useful to improve the quality of the voice, with
-; big jumps in/broken timestamps, usually sent from exotic devices
-; and programs. Defaults to 1000.
+                              ; resynchronized. Useful to improve the quality of the voice, with
+                              ; big jumps in/broken timestamps, usually sent from exotic devices
+                              ; and programs. Defaults to 1000.
 
 ; jbimpl = fixed              ; Jitterbuffer implementation, used on the receiving side of a MGCP
-; channel. Two implementations are currently available - "fixed"
-; (with size always equals to jbmax-size) and "adaptive" (with
-; variable size, actually the new jb of IAX2). Defaults to fixed.
+                              ; channel. Two implementations are currently available - "fixed"
+                              ; (with size always equals to jbmax-size) and "adaptive" (with
+                              ; variable size, actually the new jb of IAX2). Defaults to fixed.
 
 ; jblog = no                  ; Enables jitterbuffer frame logging. Defaults to "no".
 ;-----------------------------------------------------------------------------------
@@ -47,27 +47,27 @@
 
 ;; The MGCP channel supports the following service codes:
 ;; # - Transfer
-;; *67 - Calling Number Delivery Blocking 
-;; *70 - Cancel Call Waiting 
-;; *72 - Call Forwarding Activation 
-;; *73 - Call Forwarding Deactivation 
-;; *78 - Do Not Disturb Activation 
-;; *79 - Do Not Disturb Deactivation 
+;; *67 - Calling Number Delivery Blocking
+;; *70 - Cancel Call Waiting
+;; *72 - Call Forwarding Activation
+;; *73 - Call Forwarding Deactivation
+;; *78 - Do Not Disturb Activation
+;; *79 - Do Not Disturb Deactivation
 ;; *8 - Call pick-up
 ;
-; known to work with Swissvoice IP10s 
-;[192.168.1.20] 
-;context=local 
-;host=192.168.1.20 
-;callerid = "John Doe" <123> 
+; known to work with Swissvoice IP10s
+;[192.168.1.20]
+;context=local
+;host=192.168.1.20
+;callerid = "John Doe" <123>
 ;callgroup=0      ; in the range from 0 to 63
 ;pickupgroup=0    ; in the range from 0 to 63
-;nat=no 
-;threewaycalling=yes 
+;nat=no
+;threewaycalling=yes
 ;transfer=yes     ; transfer requires threewaycalling=yes. Use FLASH to transfer
 ;callwaiting=yes  ; this might be a cause of trouble for ip10s
-;cancallforward=yes 
-;line => aaln/1 
+;cancallforward=yes
+;line => aaln/1
 ;
 
 ;[dph100]
@@ -79,7 +79,7 @@
 ;context=local
 ;host=dynamic
 ;dtmfmode=none		; DTMF Mode can be 'none', 'rfc2833', or 'inband' or
-; 'hybrid' which starts in none and moves to inband.  Default is none.
+			; 'hybrid' which starts in none and moves to inband.  Default is none.
 ;slowsequence=yes	; The DPH100M does not follow MGCP standards for sequencing
 ;line => aaln/1
 
@@ -87,11 +87,11 @@
 ;[192.168.1.20]
 ;accountcode	= 1000		; record this in cdr as account identification for billing
 ;amaflags	= billing	; record this in cdr as flagged for 'billing',
-; 'documentation', or 'omit'
+				; 'documentation', or 'omit'
 ;context	= local
 ;host		= 192.168.1.20
-;wcardep	= aaln/*	; enables wildcard endpoint and sets it to 'aaln/*' 
-; another common format is '*'
+;wcardep	= aaln/*	; enables wildcard endpoint and sets it to 'aaln/*'
+				; another common format is '*'
 ;callerid 	= "Duane Cox" <123>	; now lets setup line 1 using per endpoint configuration...
 ;callwaiting	= no
 ;callreturn	= yes