Merged revisions 214517 via svnmerge from

https://origsvn.digium.com/svn/asterisk/branches/1.4

........
  r214517 | tilghman | 2009-08-27 16:45:34 -0500 (Thu, 27 Aug 2009) | 7 lines
  
  Use autoconf to detect libcurl, as this enables cross-compilation checks, something we didn't allow before.
  (closes issue #15714)
   Reported by: pprindeville
   Patches: 
         20090813__issue15714.diff.txt uploaded by tilghman (license 14)
   Tested by: pprindeville
........


git-svn-id: http://svn.digium.com/svn/asterisk/trunk@214518 f38db490-d61c-443f-a65b-d21fe96a405b

1 files changed, 243 insertions, 0 deletions

diff --git a/autoconf/libcurl.m4 b/autoconf/libcurl.m4
new file mode 100644
index 000000000..07e21c2c4
--- /dev/null
+++ b/autoconf/libcurl.m4
@@ -0,0 +1,243 @@
+# LIBCURL_CHECK_CONFIG ([DEFAULT-ACTION], [MINIMUM-VERSION],
+#                       [ACTION-IF-YES], [ACTION-IF-NO])
+# ----------------------------------------------------------
+#      David Shaw <dshaw@jabberwocky.com>   May-09-2006
+#
+# Checks for libcurl.  DEFAULT-ACTION is the string yes or no to
+# specify whether to default to --with-libcurl or --without-libcurl.
+# If not supplied, DEFAULT-ACTION is yes.  MINIMUM-VERSION is the
+# minimum version of libcurl to accept.  Pass the version as a regular
+# version number like 7.10.1. If not supplied, any version is
+# accepted.  ACTION-IF-YES is a list of shell commands to run if
+# libcurl was successfully found and passed the various tests.
+# ACTION-IF-NO is a list of shell commands that are run otherwise.
+# Note that using --without-libcurl does run ACTION-IF-NO.
+#
+# This macro #defines HAVE_CURL if a working libcurl setup is
+# found, and sets @CURL_LIB@ and @CURL_INCLUDE@ to the necessary
+# values.  Other useful defines are LIBCURL_FEATURE_xxx where xxx are
+# the various features supported by libcurl, and LIBCURL_PROTOCOL_yyy
+# where yyy are the various protocols supported by libcurl.  Both xxx
+# and yyy are capitalized.  See the list of AH_TEMPLATEs at the top of
+# the macro for the complete list of possible defines.  Shell
+# variables $libcurl_feature_xxx and $libcurl_protocol_yyy are also
+# defined to 'yes' for those features and protocols that were found.
+# Note that xxx and yyy keep the same capitalization as in the
+# curl-config list (e.g. it's "HTTP" and not "http").
+#
+# Users may override the detected values by doing something like:
+# CURL_LIB="-lcurl" CURL_INCLUDE="-I/usr/myinclude" ./configure
+#
+# For the sake of sanity, this macro assumes that any libcurl that is
+# found is after version 7.7.2, the first version that included the
+# curl-config script.  Note that it is very important for people
+# packaging binary versions of libcurl to include this script!
+# Without curl-config, we can only guess what protocols are available,
+# or use curl_version_info to figure it out at runtime.
+
+AC_DEFUN([AST_LIBCURL_CHECK_CONFIG],
+[
+  AH_TEMPLATE([LIBCURL_FEATURE_SSL],[Defined if libcurl supports SSL])
+  AH_TEMPLATE([LIBCURL_FEATURE_KRB4],[Defined if libcurl supports KRB4])
+  AH_TEMPLATE([LIBCURL_FEATURE_IPV6],[Defined if libcurl supports IPv6])
+  AH_TEMPLATE([LIBCURL_FEATURE_LIBZ],[Defined if libcurl supports libz])
+  AH_TEMPLATE([LIBCURL_FEATURE_ASYNCHDNS],[Defined if libcurl supports AsynchDNS])
+  AH_TEMPLATE([LIBCURL_FEATURE_IDN],[Defined if libcurl supports IDN])
+  AH_TEMPLATE([LIBCURL_FEATURE_SSPI],[Defined if libcurl supports SSPI])
+  AH_TEMPLATE([LIBCURL_FEATURE_NTLM],[Defined if libcurl supports NTLM])
+
+  AH_TEMPLATE([LIBCURL_PROTOCOL_HTTP],[Defined if libcurl supports HTTP])
+  AH_TEMPLATE([LIBCURL_PROTOCOL_HTTPS],[Defined if libcurl supports HTTPS])
+  AH_TEMPLATE([LIBCURL_PROTOCOL_FTP],[Defined if libcurl supports FTP])
+  AH_TEMPLATE([LIBCURL_PROTOCOL_FTPS],[Defined if libcurl supports FTPS])
+  AH_TEMPLATE([LIBCURL_PROTOCOL_FILE],[Defined if libcurl supports FILE])
+  AH_TEMPLATE([LIBCURL_PROTOCOL_TELNET],[Defined if libcurl supports TELNET])
+  AH_TEMPLATE([LIBCURL_PROTOCOL_LDAP],[Defined if libcurl supports LDAP])
+  AH_TEMPLATE([LIBCURL_PROTOCOL_DICT],[Defined if libcurl supports DICT])
+  AH_TEMPLATE([LIBCURL_PROTOCOL_TFTP],[Defined if libcurl supports TFTP])
+
+  AC_ARG_WITH(libcurl,
+     AC_HELP_STRING([--with-libcurl=DIR],[look for the curl library in DIR]),
+     [_libcurl_with=$withval],[_libcurl_with=ifelse([$1],,[yes],[$1])])
+
+  if test "$_libcurl_with" != "no" ; then
+
+     AC_PROG_AWK
+
+     _libcurl_version_parse="eval $AWK '{split(\$NF,A,\".\"); X=256*256*A[[1]]+256*A[[2]]+A[[3]]; print X;}'"
+
+     _libcurl_try_link=yes
+
+     if test -d "$_libcurl_with" ; then
+        CURL_INCLUDE="-I$withval/include"
+        _libcurl_ldflags="-L$withval/lib"
+        AC_PATH_PROG([_libcurl_config],[curl-config],["$withval/bin"],
+                     ["$withval/bin"])
+     else
+        AC_PATH_PROG([_libcurl_config],[curl-config])
+     fi
+
+     if test x$_libcurl_config != "x" ; then
+        AC_CACHE_CHECK([for the version of libcurl],
+           [libcurl_cv_lib_curl_version],
+           [libcurl_cv_lib_curl_version=`$_libcurl_config --version | $AWK '{print $[]2}'`])
+
+        _libcurl_version=`echo $libcurl_cv_lib_curl_version | $_libcurl_version_parse`
+        _libcurl_wanted=`echo ifelse([$2],,[0],[$2]) | $_libcurl_version_parse`
+
+        if test $_libcurl_wanted -gt 0 ; then
+           AC_CACHE_CHECK([for libcurl >= version $2],
+              [libcurl_cv_lib_version_ok],
+              [
+              if test $_libcurl_version -ge $_libcurl_wanted ; then
+                 libcurl_cv_lib_version_ok=yes
+              else
+                 libcurl_cv_lib_version_ok=no
+              fi
+              ])
+        fi
+
+        if test $_libcurl_wanted -eq 0 || test x$libcurl_cv_lib_version_ok = xyes ; then
+           if test x"$CURL_INCLUDE" = "x" ; then
+              CURL_INCLUDE=`$_libcurl_config --cflags`
+           fi
+           if test x"$CURL_LIB" = "x" ; then
+              CURL_LIB=`$_libcurl_config --libs`
+
+              # This is so silly, but Apple actually has a bug in their
+              # curl-config script.  Fixed in Tiger, but there are still
+              # lots of Panther installs around.
+              case "${host}" in
+                 powerpc-apple-darwin7*)
+                    CURL_LIB=`echo $CURL_LIB | sed -e 's|-arch i386||g'`
+                 ;;
+              esac
+           fi
+
+           # All curl-config scripts support --feature
+           _libcurl_features=`$_libcurl_config --feature`
+
+           # Is it modern enough to have --protocols? (7.12.4)
+           if test $_libcurl_version -ge 461828 ; then
+              _libcurl_protocols=`$_libcurl_config --protocols`
+           fi
+        else
+           _libcurl_try_link=no
+        fi
+
+        unset _libcurl_wanted
+     fi
+
+     if test $_libcurl_try_link = yes ; then
+
+        # we didn't find curl-config, so let's see if the user-supplied
+        # link line (or failing that, "-lcurl") is enough.
+        CURL_LIB=${CURL_LIB-"$_libcurl_ldflags -lcurl"}
+
+        AC_CACHE_CHECK([whether libcurl is usable],
+           [libcurl_cv_lib_curl_usable],
+           [
+           _libcurl_save_cppflags=$CPPFLAGS
+           CPPFLAGS="$CURL_INCLUDE $CPPFLAGS"
+           _libcurl_save_libs=$LIBS
+           LIBS="$CURL_LIB $LIBS"
+
+           AC_LINK_IFELSE(AC_LANG_PROGRAM([#include <curl/curl.h>],[
+/* Try and use a few common options to force a failure if we are
+   missing symbols or can't link. */
+int x;
+curl_easy_setopt(NULL,CURLOPT_URL,NULL);
+x=CURL_ERROR_SIZE;
+x=CURLOPT_WRITEFUNCTION;
+x=CURLOPT_FILE;
+x=CURLOPT_ERRORBUFFER;
+x=CURLOPT_STDERR;
+x=CURLOPT_VERBOSE;
+]),libcurl_cv_lib_curl_usable=yes,libcurl_cv_lib_curl_usable=no)
+
+           CPPFLAGS=$_libcurl_save_cppflags
+           LIBS=$_libcurl_save_libs
+           unset _libcurl_save_cppflags
+           unset _libcurl_save_libs
+           ])
+
+        if test $libcurl_cv_lib_curl_usable = yes ; then
+
+           # Does curl_free() exist in this version of libcurl?
+           # If not, fake it with free()
+
+           _libcurl_save_cppflags=$CPPFLAGS
+           CPPFLAGS="$CPPFLAGS $CURL_INCLUDE"
+           _libcurl_save_libs=$LIBS
+           LIBS="$LIBS $CURL_LIB"
+
+           AC_CHECK_FUNC(curl_free,,
+              AC_DEFINE(curl_free,free,
+                [Define curl_free() as free() if our version of curl lacks curl_free.]))
+
+           CPPFLAGS=$_libcurl_save_cppflags
+           LIBS=$_libcurl_save_libs
+           unset _libcurl_save_cppflags
+           unset _libcurl_save_libs
+
+           AC_DEFINE(HAVE_CURL,1,
+             [Define to 1 if you have a functional curl library.])
+           AC_SUBST(CURL_INCLUDE)
+           AC_SUBST(CURL_LIB)
+           PBX_CURL=1
+
+           for _libcurl_feature in $_libcurl_features ; do
+              AC_DEFINE_UNQUOTED(AS_TR_CPP(libcurl_feature_$_libcurl_feature),[1])
+              eval AS_TR_SH(libcurl_feature_$_libcurl_feature)=yes
+           done
+
+           if test "x$_libcurl_protocols" = "x" ; then
+
+              # We don't have --protocols, so just assume that all
+              # protocols are available
+              _libcurl_protocols="HTTP FTP FILE TELNET LDAP DICT"
+
+              if test x$libcurl_feature_SSL = xyes ; then
+                 _libcurl_protocols="$_libcurl_protocols HTTPS"
+
+                 # FTPS wasn't standards-compliant until version
+                 # 7.11.0
+                 if test $_libcurl_version -ge 461568; then
+                    _libcurl_protocols="$_libcurl_protocols FTPS"
+                 fi
+              fi
+           fi
+
+           for _libcurl_protocol in $_libcurl_protocols ; do
+              AC_DEFINE_UNQUOTED(AS_TR_CPP(libcurl_protocol_$_libcurl_protocol),[1])
+              eval AS_TR_SH(libcurl_protocol_$_libcurl_protocol)=yes
+           done
+        else
+           unset CURL_LIB
+           unset CURL_INCLUDE
+           PBX_CURL=0
+        fi
+     fi
+
+     unset _libcurl_try_link
+     unset _libcurl_version_parse
+     unset _libcurl_config
+     unset _libcurl_feature
+     unset _libcurl_features
+     unset _libcurl_protocol
+     unset _libcurl_protocols
+     unset _libcurl_version
+     unset _libcurl_ldflags
+  fi
+
+  if test x$_libcurl_with = xno || test x$libcurl_cv_lib_curl_usable != xyes ; then
+     # This is the IF-NO path
+     ifelse([$4],,:,[$4])
+  else
+     # This is the IF-YES path
+     ifelse([$3],,:,[$3])
+  fi
+
+  unset _libcurl_with
+])dnl
+