diff options
author | markster <markster@f38db490-d61c-443f-a65b-d21fe96a405b> | 2000-01-07 11:02:42 +0000 |
---|---|---|
committer | markster <markster@f38db490-d61c-443f-a65b-d21fe96a405b> | 2000-01-07 11:02:42 +0000 |
commit | a320084f60096e46f2981f6300480f34317b508c (patch) | |
tree | 901a5c133c692b462056b1f80064f68c2c5ebcb3 | |
parent | e4b9f6a3431bc99c454ddda3a845629e832b7226 (diff) |
Version 0.1.2 from FTP
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@199 f38db490-d61c-443f-a65b-d21fe96a405b
-rwxr-xr-x | README | 56 |
1 files changed, 55 insertions, 1 deletions
@@ -22,6 +22,60 @@ as well. If you want to use format_wav module, then you need a very recent version of libaudiofile (at least version 0.2.0, or you can apply the -following patch to version 0.1.9): +included patch. RPMS for the patched libaudiofile are available at: +ftp://ftp.asteriskpbx.com/pub/asterisk/support +* GETTING STARTED + +First, be sure you've installed the required libaudiofile upgrade if +you want to use the non-GSM WAV format. Next, be sure you've got +supported hardware. To use Asterisk right now, you will need one of +the following: + + * Adtran Atlas 800 Plus + * QuickNet Internet PhoneJack + * Full Duplex Sound Card supported by Linux + +Assuming you have one of these (most likely the third) you're ready to +proceed: + +1) Run "make" +2) Run "make install" + +If this is your first time working with Asterisk, you may wish to install +the sample PBX, with demonstration extensions, etc. If so, run: + + "make samples" + +Doing so will overwrite any existing config files you have. + +Finally, you can launch Asterisk with: + + ./asterisk -vvvc + +If you get an error about unresolved symbols, install the updated +libaudiofile (available at ftp://ftp.asteriskpbx.com/pub/asterisk/support + +You'll see a bunch of verbose messages fly by your screen as Asterisk +initializes (that's the "very very verbose" mode). When it's ready, if +you specified the "c" then you'll get a command line console, that looks +like this: + +*CLI> + +You can type "help" at any time to get help with the system. For help +with a specific command, type "help <command>". To start the PBX using +your sound card, you can type "dial" to dial the PBX. Then you can use +"answer", "hangup", and "dial" to simulate the actions of a telephone. +Remember that if you don't have a full duplex sound card (And asterisk +will tell you somewhere in its verbose messages if you do/don't) than it +won't work right (not yet). + +Feel free to look over the configuration files in /etc/asterisk, where +you'll find a lot of information about what you can do with Asterisk. + +Finally, you may wish to visit the web site and join the mailing list if +you're interested in getting more information. + +Mark |