Remove more remnants of chan_vpb

git-svn-id: http://svn.digium.com/svn/asterisk/trunk@100421 f38db490-d61c-443f-a65b-d21fe96a405b

3 files changed, 0 insertions, 112 deletions

diff --git a/build_tools/menuselect-deps.in b/build_tools/menuselect-deps.in
index 80eaf7d4b..0a7dd904a 100644
--- a/build_tools/menuselect-deps.in
+++ b/build_tools/menuselect-deps.in
@@ -40,7 +40,6 @@ TONEZONE=@PBX_TONEZONE@
 UNIXODBC=@PBX_UNIXODBC@
 USB=@PBX_USB@
 VORBIS=@PBX_VORBIS@
-VPBAPI=@PBX_VPB@
 WINARCH=@WINARCH@
 ZAPTEL=@PBX_ZAPTEL@
 ZAPTEL_TRANSCODE=@PBX_ZAPTEL_TRANSCODE@
diff --git a/configs/vpb.conf.sample b/configs/vpb.conf.sample
deleted file mode 100644
index 4a9b0b36a..000000000
--- a/configs/vpb.conf.sample
+++ /dev/null
@@ -1,108 +0,0 @@
-;
-; V6PCI/V12PCI config file for VoiceTronix Hardware
-;
-; Options for [general] section
-;
-; type = v12pci|v6pci|v4pci
-; cards = number of cards
-;    To use Asterisk indication tones
-; indication = 1
-;    none,-24db,-18db only for use with OpenLine4
-; ecsuppthres = 0|2048|4096
-;    Inter Digit Delay timeout for when collecting DTMF tones for dialling
-;    from a Station port, in ms
-; dtmfidd = 3000
-;    To use Asterisk DTMF detection
-; ast-dtmf-det=1
-;    Used with ast-dtmf-det
-; relaxdtmf=1
-;    When a native bridge occurs between 2 vpb channels, it will only break
-;    the connection for '#' and '*'
-; break-for-dtmf=no
-;    Set the maximum period between received rings, default 4000ms
-; timer_period_ring=4000
-;
-; Options for [interface] section
-; board = board_number (1, 2, 3, ...)
-; channel = channel_number (1,2,3...)
-; mode = fxo|immediate|dialtone -- for type of line and line handling
-; context = starting context
-; echocancel = on|off (on by default of v4pci, off by default for others)
-; callerid = on|off|v23|bell (on => to collect caller ID if available between 1st/2nd rings using vpb functions)
-;                            (v23|bell => collect caller ID using asterisk functions)
-;            Or for use with FXS channels a '"name" <location>' format can be used to set the channels CID
-;
-; UseLoopDrop = 0|1 (enables the use of Loop Drop detection, on by default in
-;                    some cases spurious loop-drops can cause unexpected 
-;                    hangup detection)
-; 
-; Gain settings
-; txgain  => Transmit Software Gain (-12 => 12)
-; rxgain  => Receive Software Gain (-12 => 12)
-; txhwgain => Transmit hardware gain (-12 => 12)
-; rxhwgain => Receive Hardware gain (-12 => 12)
-;
-; These are advanced settings and only mentioned for completeness.
-; bal1  => Hybrid balance codec register 1
-; bal2  => Hybrid balance codec register 2
-; bal3  => Hybrid balance codec register 3
-;
-; Dial translations - if you want a pause or hook-flash in your dial string
-; you can use "w" for pause (wait) or "f" for "hook-flash", eg:
-; exten => _9XXX,1,Dial(vpb/g1/ww${EXTEN:${TRUNKMSD}})
-;
-;
-
-[general]
-type = v12pci
-;type = v6pci
-;type = v4pci
-cards = 1
-
-[interfaces]
-
-board = 0
-echocancel = on
-
-
-; For OpenLine4 cards
-;context = demo
-;mode = fxo
-;channel = 0
-;channel = 1
-;channel = 2
-;channel = 3
-
-; For OpenSwith12 with jumpers at factory default
-context = demo
-mode = fxo
-channel = 8
-channel = 9
-channel = 10
-channel = 11
-
-context = local
-mode = dialtone
-channel = 0
-channel = 1
-channel = 2
-channel = 3
-channel = 4
-channel = 5
-channel = 6
-channel = 7
-;
-; For OpenSwitch6
-; Note that V6PCI channel numbers start at 7!
-;context = demo
-;mode = fxo
-;channel = 6
-;channel = 7
-
-;mode = dialtone
-;channel = 8
-;channel = 9
-;channel = 10
-;channel = 11
-
-
diff --git a/makeopts.in b/makeopts.in
index 1b150a94b..3ada45099 100644
--- a/makeopts.in
+++ b/makeopts.in
@@ -195,9 +195,6 @@ UNIXODBC_LIB=@UNIXODBC_LIB@
 VORBIS_INCLUDE=@VORBIS_INCLUDE@
 VORBIS_LIB=@VORBIS_LIB@
 
-VPBAPI_INCLUDE=@VPB_INCLUDE@
-VPBAPI_LIB=@VPB_LIB@
-
 ZAPTEL_INCLUDE=@ZAPTEL_INCLUDE@
 
 ZLIB_INCLUDE=@ZLIB_INCLUDE@