Remove libresample from the Asterisk source tree. It is now available in its

own repository, and must be installed like any other library for Asterisk to
use.  The two modules that require it are codec_resample and app_jack.

To install libresample:

$ svn co http://svn.digium.com/svn/libresample/trunk libresample
$ cd libresample
$ ./configure
$ make
$ sudo make install

This code is currently in our own repository because the build system did not
include the appropriate targets for building a dynamic library or for installing
the library.


git-svn-id: http://svn.digium.com/svn/asterisk/trunk@132390 f38db490-d61c-443f-a65b-d21fe96a405b

30 files changed, 331 insertions, 10276 deletions

diff --git a/apps/app_jack.c b/apps/app_jack.c
index 661335313..46d36573f 100644
--- a/apps/app_jack.c
+++ b/apps/app_jack.c
@@ -27,12 +27,14 @@
  * another application, or to play audio from another application.
  *
  * \arg http://www.jackaudio.org/
+ * \arg http://svn.digium.com/svn/libresample/trunk
  *
  * \ingroup applications
  */
 
 /*** MODULEINFO
 	<depend>jack</depend>
+	<depend>resample</depend>
  ***/
 
 #include "asterisk.h"
@@ -44,11 +46,12 @@ ASTERISK_FILE_VERSION(__FILE__, "$Revision$")
 #include <jack/jack.h>
 #include <jack/ringbuffer.h>
 
+#include <libresample.h>
+
 #include "asterisk/module.h"
 #include "asterisk/channel.h"
 #include "asterisk/strings.h"
 #include "asterisk/lock.h"
-#include "asterisk/libresample.h"
 #include "asterisk/app.h"
 #include "asterisk/pbx.h"
 #include "asterisk/audiohook.h"
diff --git a/build_tools/menuselect-deps.in b/build_tools/menuselect-deps.in
index 45198c30e..dff96f6ba 100644
--- a/build_tools/menuselect-deps.in
+++ b/build_tools/menuselect-deps.in
@@ -30,6 +30,7 @@ PGSQL=@PBX_PGSQL@
 POPT=@PBX_POPT@
 PORTAUDIO=@PBX_PORTAUDIO@
 PRI=@PBX_PRI@
+RESAMPLE=@PBX_RESAMPLE@
 AIS=@PBX_AIS@
 RADIUS=@PBX_RADIUS@
 SPANDSP=@PBX_SPANDSP@
diff --git a/codecs/codec_resample.c b/codecs/codec_resample.c
index 83479047b..3c61f3a0a 100644
--- a/codecs/codec_resample.c
+++ b/codecs/codec_resample.c
@@ -20,10 +20,16 @@
  * \file
  *
  * \brief Resample slinear audio
+ * 
+ * \arg http://svn.digium.com/svn/libresample/trunk
  *
  * \ingroup codecs
  */
 
+/*** MODULEINFO
+	<depend>resample</depend>
+ ***/
+
 #include "asterisk.h"
 
 ASTERISK_FILE_VERSION(__FILE__, "$Revision$")
@@ -37,9 +43,10 @@ ASTERISK_FILE_VERSION(__FILE__, "$Revision$")
 #include <limits.h>
 /* } */
 
+#include <libresample.h>
+
 #include "asterisk/module.h"
 #include "asterisk/translate.h"
-#include "asterisk/libresample.h"
 
 #include "slin_resample_ex.h"
 
diff --git a/configure b/configure
index e2fce4bbe..f2c0b00a7 100755
--- a/configure
+++ b/configure
@@ -1,5 +1,5 @@
 #! /bin/sh
-# From configure.ac Revision: 127767 .
+# From configure.ac Revision: 130040 .
 # Guess values for system-dependent variables and create Makefiles.
 # Generated by GNU Autoconf 2.61 for asterisk 1.6.
 #
@@ -852,6 +852,10 @@ PRI_LIB
 PRI_INCLUDE
 PRI_DIR
 PBX_PRI
+RESAMPLE_LIB
+RESAMPLE_INCLUDE
+RESAMPLE_DIR
+PBX_RESAMPLE
 SPANDSP_LIB
 SPANDSP_INCLUDE
 SPANDSP_DIR
@@ -1613,6 +1617,7 @@ Optional Packages:
   --with-popt=PATH        use popt files in PATH
   --with-portaudio=PATH   use PortAudio files in PATH
   --with-pri=PATH         use ISDN PRI files in PATH
+  --with-resample=PATH    use LIBRESAMPLE files in PATH
   --with-spandsp=PATH     use SPANDSP files in PATH
   --with-ss7=PATH         use ISDN SS7 files in PATH
   --with-pwlib=PATH       use PWlib files in PATH
@@ -8817,6 +8822,34 @@ fi
 
 
 
+    RESAMPLE_DESCRIP="LIBRESAMPLE"
+    RESAMPLE_OPTION="resample"
+
+# Check whether --with-resample was given.
+if test "${with_resample+set}" = set; then
+  withval=$with_resample;
+	case ${withval} in
+	n|no)
+	USE_RESAMPLE=no
+	;;
+	y|ye|yes)
+	ac_mandatory_list="${ac_mandatory_list} RESAMPLE"
+	;;
+	*)
+	RESAMPLE_DIR="${withval}"
+	ac_mandatory_list="${ac_mandatory_list} RESAMPLE"
+	;;
+	esac
+
+fi
+
+    PBX_RESAMPLE=0
+
+
+
+
+
+
     SPANDSP_DESCRIP="SPANDSP"
     SPANDSP_OPTION="spandsp"
 
@@ -39293,6 +39326,268 @@ fi
 
 
 
+if test "x${PBX_RESAMPLE}" != "x1" -a "${USE_RESAMPLE}" != "no"; then
+   pbxlibdir=""
+   # if --with-RESAMPLE=DIR has been specified, use it.
+   if test "x${RESAMPLE_DIR}" != "x"; then
+      if test -d ${RESAMPLE_DIR}/lib; then
+      	 pbxlibdir="-L${RESAMPLE_DIR}/lib"
+      else
+      	 pbxlibdir="-L${RESAMPLE_DIR}"
+      fi
+   fi
+   pbxfuncname="resample_open"
+   if test "x${pbxfuncname}" = "x" ; then   # empty lib, assume only headers
+      AST_RESAMPLE_FOUND=yes
+   else
+      as_ac_Lib=`echo "ac_cv_lib_resample_${pbxfuncname}" | $as_tr_sh`
+{ echo "$as_me:$LINENO: checking for ${pbxfuncname} in -lresample" >&5
+echo $ECHO_N "checking for ${pbxfuncname} in -lresample... $ECHO_C" >&6; }
+if { as_var=$as_ac_Lib; eval "test \"\${$as_var+set}\" = set"; }; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lresample ${pbxlibdir} -lm $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char ${pbxfuncname} ();
+int
+main ()
+{
+return ${pbxfuncname} ();
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext &&
+       $as_test_x conftest$ac_exeext; then
+  eval "$as_ac_Lib=yes"
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	eval "$as_ac_Lib=no"
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+      conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+ac_res=`eval echo '${'$as_ac_Lib'}'`
+	       { echo "$as_me:$LINENO: result: $ac_res" >&5
+echo "${ECHO_T}$ac_res" >&6; }
+if test `eval echo '${'$as_ac_Lib'}'` = yes; then
+  AST_RESAMPLE_FOUND=yes
+else
+  AST_RESAMPLE_FOUND=no
+fi
+
+   fi
+
+   # now check for the header.
+   if test "${AST_RESAMPLE_FOUND}" = "yes"; then
+      RESAMPLE_LIB="${pbxlibdir} -lresample -lm"
+      # if --with-RESAMPLE=DIR has been specified, use it.
+      if test "x${RESAMPLE_DIR}" != "x"; then
+	 RESAMPLE_INCLUDE="-I${RESAMPLE_DIR}/include"
+      fi
+      RESAMPLE_INCLUDE="${RESAMPLE_INCLUDE} "
+      if test "xlibresample.h" = "x" ; then	# no header, assume found
+         RESAMPLE_HEADER_FOUND="1"
+      else				# check for the header
+         saved_cppflags="${CPPFLAGS}"
+         CPPFLAGS="${CPPFLAGS} ${RESAMPLE_INCLUDE}"
+	 if test "${ac_cv_header_libresample_h+set}" = set; then
+  { echo "$as_me:$LINENO: checking for libresample.h" >&5
+echo $ECHO_N "checking for libresample.h... $ECHO_C" >&6; }
+if test "${ac_cv_header_libresample_h+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_header_libresample_h" >&5
+echo "${ECHO_T}$ac_cv_header_libresample_h" >&6; }
+else
+  # Is the header compilable?
+{ echo "$as_me:$LINENO: checking libresample.h usability" >&5
+echo $ECHO_N "checking libresample.h usability... $ECHO_C" >&6; }
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+$ac_includes_default
+#include <libresample.h>
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
+  ac_header_compiler=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_header_compiler=no
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+echo "${ECHO_T}$ac_header_compiler" >&6; }
+
+# Is the header present?
+{ echo "$as_me:$LINENO: checking libresample.h presence" >&5
+echo $ECHO_N "checking libresample.h presence... $ECHO_C" >&6; }
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <libresample.h>
+_ACEOF
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } >/dev/null && {
+	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       }; then
+  ac_header_preproc=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+  ac_header_preproc=no
+fi
+
+rm -f conftest.err conftest.$ac_ext
+{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+echo "${ECHO_T}$ac_header_preproc" >&6; }
+
+# So?  What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
+  yes:no: )
+    { echo "$as_me:$LINENO: WARNING: libresample.h: accepted by the compiler, rejected by the preprocessor!" >&5
+echo "$as_me: WARNING: libresample.h: accepted by the compiler, rejected by the preprocessor!" >&2;}
+    { echo "$as_me:$LINENO: WARNING: libresample.h: proceeding with the compiler's result" >&5
+echo "$as_me: WARNING: libresample.h: proceeding with the compiler's result" >&2;}
+    ac_header_preproc=yes
+    ;;
+  no:yes:* )
+    { echo "$as_me:$LINENO: WARNING: libresample.h: present but cannot be compiled" >&5
+echo "$as_me: WARNING: libresample.h: present but cannot be compiled" >&2;}
+    { echo "$as_me:$LINENO: WARNING: libresample.h:     check for missing prerequisite headers?" >&5
+echo "$as_me: WARNING: libresample.h:     check for missing prerequisite headers?" >&2;}
+    { echo "$as_me:$LINENO: WARNING: libresample.h: see the Autoconf documentation" >&5
+echo "$as_me: WARNING: libresample.h: see the Autoconf documentation" >&2;}
+    { echo "$as_me:$LINENO: WARNING: libresample.h:     section \"Present But Cannot Be Compiled\"" >&5
+echo "$as_me: WARNING: libresample.h:     section \"Present But Cannot Be Compiled\"" >&2;}
+    { echo "$as_me:$LINENO: WARNING: libresample.h: proceeding with the preprocessor's result" >&5
+echo "$as_me: WARNING: libresample.h: proceeding with the preprocessor's result" >&2;}
+    { echo "$as_me:$LINENO: WARNING: libresample.h: in the future, the compiler will take precedence" >&5
+echo "$as_me: WARNING: libresample.h: in the future, the compiler will take precedence" >&2;}
+    ( cat <<\_ASBOX
+## ------------------------------- ##
+## Report this to www.asterisk.org ##
+## ------------------------------- ##
+_ASBOX
+     ) | sed "s/^/$as_me: WARNING:     /" >&2
+    ;;
+esac
+{ echo "$as_me:$LINENO: checking for libresample.h" >&5
+echo $ECHO_N "checking for libresample.h... $ECHO_C" >&6; }
+if test "${ac_cv_header_libresample_h+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_cv_header_libresample_h=$ac_header_preproc
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_header_libresample_h" >&5
+echo "${ECHO_T}$ac_cv_header_libresample_h" >&6; }
+
+fi
+if test $ac_cv_header_libresample_h = yes; then
+  RESAMPLE_HEADER_FOUND=1
+else
+  RESAMPLE_HEADER_FOUND=0
+fi
+
+
+         CPPFLAGS="${saved_cppflags}"
+      fi
+      if test "x${RESAMPLE_HEADER_FOUND}" = "x0" ; then
+         RESAMPLE_LIB=""
+         RESAMPLE_INCLUDE=""
+      else
+         if test "x${pbxfuncname}" = "x" ; then		# only checking headers -> no library
+	    RESAMPLE_LIB=""
+	 fi
+         PBX_RESAMPLE=1
+         # XXX don't know how to evaluate the description (third argument) in AC_DEFINE_UNQUOTED
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_RESAMPLE 1
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_RESAMPLE_VERSION
+_ACEOF
+
+      fi
+   fi
+fi
+
+
+
     if test "x${PBX_SPANDSP}" != "x1" -a "${USE_SPANDSP}" != "no"; then
 	{ echo "$as_me:$LINENO: checking if \"
 		#if SPANDSP_RELEASE_DATE < 20080516
@@ -50165,6 +50460,10 @@ PRI_LIB!$PRI_LIB$ac_delim
 PRI_INCLUDE!$PRI_INCLUDE$ac_delim
 PRI_DIR!$PRI_DIR$ac_delim
 PBX_PRI!$PBX_PRI$ac_delim
+RESAMPLE_LIB!$RESAMPLE_LIB$ac_delim
+RESAMPLE_INCLUDE!$RESAMPLE_INCLUDE$ac_delim
+RESAMPLE_DIR!$RESAMPLE_DIR$ac_delim
+PBX_RESAMPLE!$PBX_RESAMPLE$ac_delim
 SPANDSP_LIB!$SPANDSP_LIB$ac_delim
 SPANDSP_INCLUDE!$SPANDSP_INCLUDE$ac_delim
 SPANDSP_DIR!$SPANDSP_DIR$ac_delim
@@ -50219,10 +50518,6 @@ SUPPSERV_DIR!$SUPPSERV_DIR$ac_delim
 PBX_SUPPSERV!$PBX_SUPPSERV$ac_delim
 OPENSSL_LIB!$OPENSSL_LIB$ac_delim
 OPENSSL_INCLUDE!$OPENSSL_INCLUDE$ac_delim
-OPENSSL_DIR!$OPENSSL_DIR$ac_delim
-PBX_OPENSSL!$PBX_OPENSSL$ac_delim
-FREETDS_LIB!$FREETDS_LIB$ac_delim
-FREETDS_INCLUDE!$FREETDS_INCLUDE$ac_delim
 _ACEOF
 
   if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 97; then
@@ -50264,6 +50559,10 @@ _ACEOF
 ac_delim='%!_!# '
 for ac_last_try in false false false false false :; do
   cat >conf$$subs.sed <<_ACEOF
+OPENSSL_DIR!$OPENSSL_DIR$ac_delim
+PBX_OPENSSL!$PBX_OPENSSL$ac_delim
+FREETDS_LIB!$FREETDS_LIB$ac_delim
+FREETDS_INCLUDE!$FREETDS_INCLUDE$ac_delim
 FREETDS_DIR!$FREETDS_DIR$ac_delim
 PBX_FREETDS!$PBX_FREETDS$ac_delim
 TERMCAP_LIB!$TERMCAP_LIB$ac_delim
@@ -50340,7 +50639,7 @@ CURL_CONFIG!$CURL_CONFIG$ac_delim
 LTLIBOBJS!$LTLIBOBJS$ac_delim
 _ACEOF
 
-  if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 74; then
+  if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 78; then
     break
   elif $ac_last_try; then
     { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
diff --git a/configure.ac b/configure.ac
index f53bfbea8..089aabeb1 100644
--- a/configure.ac
+++ b/configure.ac
@@ -234,6 +234,7 @@ AST_EXT_LIB_SETUP([PGSQL], [PostgreSQL], [postgres])
 AST_EXT_LIB_SETUP([POPT], [popt], [popt])
 AST_EXT_LIB_SETUP([PORTAUDIO], [PortAudio], [portaudio])
 AST_EXT_LIB_SETUP([PRI], [ISDN PRI], [pri])
+AST_EXT_LIB_SETUP([RESAMPLE], [LIBRESAMPLE], [resample])
 AST_EXT_LIB_SETUP([SPANDSP], [SPANDSP], [spandsp])
 AST_EXT_LIB_SETUP([SS7], [ISDN SS7], [ss7])
 AST_EXT_LIB_SETUP([PWLIB], [PWlib], [pwlib])
@@ -1297,6 +1298,8 @@ AST_EXT_LIB_CHECK([PRI], [pri], [pri_get_version], [libpri.h])
 
 AST_EXT_LIB_CHECK([PRI_INBANDRELEASE], [pri], [pri_set_inbandrelease], [libpri.h])
 
+AST_EXT_LIB_CHECK([RESAMPLE], [resample], [resample_open], [libresample.h], [-lm])
+
 AST_C_COMPILE_CHECK([SPANDSP], [
 		#if SPANDSP_RELEASE_DATE < 20080516
 		#error "spandsp 0.0.5 or greater is required"
diff --git a/include/asterisk/autoconfig.h.in b/include/asterisk/autoconfig.h.in
index 19d052db7..d3245cea4 100644
--- a/include/asterisk/autoconfig.h.in
+++ b/include/asterisk/autoconfig.h.in
@@ -665,6 +665,12 @@
 /* Define to indicate the ${REMAINDER_DESCRIP} library version */
 #undef HAVE_REMAINDER_VERSION
 
+/* Define this to indicate the ${RESAMPLE_DESCRIP} library */
+#undef HAVE_RESAMPLE
+
+/* Define to indicate the ${RESAMPLE_DESCRIP} library version */
+#undef HAVE_RESAMPLE_VERSION
+
 /* Define to 1 if your system has the ndestroy resolver function. */
 #undef HAVE_RES_NDESTROY
 
diff --git a/include/asterisk/libresample.h b/include/asterisk/libresample.h
deleted file mode 120000
index d71269da1..000000000
--- a/include/asterisk/libresample.h
+++ /dev/null
@@ -1 +0,0 @@
-../../main/libresample/include/libresample.h
\ No newline at end of file
diff --git a/main/Makefile b/main/Makefile
index 00081c5c1..c27095f74 100644
--- a/main/Makefile
+++ b/main/Makefile
@@ -17,8 +17,6 @@ all: asterisk
 
 include $(ASTTOPDIR)/Makefile.moddir_rules
 
-RESAMPLE_OBJS:=libresample/src/resample.o libresample/src/resamplesubs.o libresample/src/filterkit.o
-
 OBJS= tcptls.o io.o sched.o logger.o frame.o loader.o config.o channel.o \
 	translate.o file.o pbx.o cli.o md5.o term.o \
 	ulaw.o alaw.o callerid.o fskmodem.o image.o app.o \
@@ -29,7 +27,7 @@ OBJS= tcptls.o io.o sched.o logger.o frame.o loader.o config.o channel.o \
 	netsock.o slinfactory.o ast_expr2.o ast_expr2f.o \
 	cryptostub.o sha1.o http.o fixedjitterbuf.o abstract_jb.o \
 	strcompat.o threadstorage.o dial.o event.o adsistub.o audiohook.o \
-	astobj2.o hashtab.o global_datastores.o $(RESAMPLE_OBJS) version.o \
+	astobj2.o hashtab.o global_datastores.o version.o \
 	features.o taskprocessor.o timing.o
 
 # we need to link in the objects statically, not as a library, because
diff --git a/main/libresample/LICENSE.txt b/main/libresample/LICENSE.txt
deleted file mode 100644
index 4ccd6ccfd..000000000
--- a/main/libresample/LICENSE.txt
+++ /dev/null
@@ -1,463 +0,0 @@
-
-                  GNU LESSER GENERAL PUBLIC LICENSE
-                       Version 2.1, February 1999
-
- Copyright (C) 1991, 1999 Free Software Foundation, Inc.
-     59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-[This is the first released version of the Lesser GPL.  It also counts
- as the successor of the GNU Library Public License, version 2, hence
- the version number 2.1.]
-
-                            Preamble
-
-  The licenses for most software are designed to take away your
-freedom to share and change it.  By contrast, the GNU General Public
-Licenses are intended to guarantee your freedom to share and change
-free software--to make sure the software is free for all its users.
-
-  This license, the Lesser General Public License, applies to some
-specially designated software packages--typically libraries--of the
-Free Software Foundation and other authors who decide to use it.  You
-can use it too, but we suggest you first think carefully about whether
-this license or the ordinary General Public License is the better
-strategy to use in any particular case, based on the explanations
-below.
-
-  When we speak of free software, we are referring to freedom of use,
-not price.  Our General Public Licenses are designed to make sure that
-you have the freedom to distribute copies of free software (and charge
-for this service if you wish); that you receive source code or can get
-it if you want it; that you can change the software and use pieces of
-it in new free programs; and that you are informed that you can do
-these things.
-
-  To protect your rights, we need to make restrictions that forbid
-distributors to deny you these rights or to ask you to surrender these
-rights.  These restrictions translate to certain responsibilities for
-you if you distribute copies of the library or if you modify it.
-
-  For example, if you distribute copies of the library, whether gratis
-or for a fee, you must give the recipients all the rights that we gave
-you.  You must make sure that they, too, receive or can get the source
-code.  If you link other code with the library, you must provide
-complete object files to the recipients, so that they can relink them
-with the library after making changes to the library and recompiling
-it.  And you must show them these terms so they know their rights.
-
-  We protect your rights with a two-step method: (1) we copyright the
-library, and (2) we offer you this license, which gives you legal
-permission to copy, distribute and/or modify the library.
-
-  To protect each distributor, we want to make it very clear that
-there is no warranty for the free library.  Also, if the library is
-modified by someone else and passed on, the recipients should know
-that what they have is not the original version, so that the original
-author's reputation will not be affected by problems that might be
-introduced by others.
-
-  Finally, software patents pose a constant threat to the existence of
-any free program.  We wish to make sure that a company cannot
-effectively restrict the users of a free program by obtaining a
-restrictive license from a patent holder.  Therefore, we insist that
-any patent license obtained for a version of the library must be
-consistent with the full freedom of use specified in this license.
-
-  Most GNU software, including some libraries, is covered by the
-ordinary GNU General Public License.  This license, the GNU Lesser
-General Public License, applies to certain designated libraries, and
-is quite different from the ordinary General Public License.  We use
-this license for certain libraries in order to permit linking those
-libraries into non-free programs.
-
-  When a program is linked with a library, whether statically or using
-a shared library, the combination of the two is legally speaking a
-combined work, a derivative of the original library.  The ordinary
-General Public License therefore permits such linking only if the
-entire combination fits its criteria of freedom.  The Lesser General
-Public License permits more lax criteria for linking other code with
-the library.
-
-  We call this license the "Lesser" General Public License because it
-does Less to protect the user's freedom than the ordinary General
-Public License.  It also provides other free software developers Less
-of an advantage over competing non-free programs.  These disadvantages
-are the reason we use the ordinary General Public License for many
-libraries.  However, the Lesser license provides advantages in certain
-special circumstances.
-
-  For example, on rare occasions, there may be a special need to
-encourage the widest possible use of a certain library, so that it becomes
-a de-facto standard.  To achieve this, non-free programs must be
-allowed to use the library.  A more frequent case is that a free
-library does the same job as widely used non-free libraries.  In this
-case, there is little to gain by limiting the free library to free
-software only, so we use the Lesser General Public License.
-
-  In other cases, permission to use a particular library in non-free
-programs enables a greater number of people to use a large body of
-free software.  For example, permission to use the GNU C Library in
-non-free programs enables many more people to use the whole GNU
-operating system, as well as its variant, the GNU/Linux operating
-system.
-
-  Although the Lesser General Public License is Less protective of the
-users' freedom, it does ensure that the user of a program that is
-linked with the Library has the freedom and the wherewithal to run
-that program using a modified version of the Library.
-
-  The precise terms and conditions for copying, distribution and
-modification follow.  Pay close attention to the difference between a
-"work based on the library" and a "work that uses the library".  The
-former contains code derived from the library, whereas the latter must
-be combined with the library in order to run.
-
-                  GNU LESSER GENERAL PUBLIC LICENSE
-   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
-  0. This License Agreement applies to any software library or other
-program which contains a notice placed by the copyright holder or
-other authorized party saying it may be distributed under the terms of
-this Lesser General Public License (also called "this License").
-Each licensee is addressed as "you".
-
-  A "library" means a collection of software functions and/or data
-prepared so as to be conveniently linked with application programs
-(which use some of those functions and data) to form executables.
-
-  The "Library", below, refers to any such software library or work
-which has been distributed under these terms.  A "work based on the
-Library" means either the Library or any derivative work under
-copyright law: that is to say, a work containing the Library or a
-portion of it, either verbatim or with modifications and/or translated
-straightforwardly into another language.  (Hereinafter, translation is
-included without limitation in the term "modification".)
-
-  "Source code" for a work means the preferred form of the work for
-making modifications to it.  For a library, complete source code means
-all the source code for all modules it contains, plus any associated
-interface definition files, plus the scripts used to control
-compilation
-and installation of the library.
-
-  Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope.  The act of
-running a program using the Library is not restricted, and output from
-such a program is covered only if its contents constitute a work based
-on the Library (independent of the use of the Library in a tool for
-writing it).  Whether that is true depends on what the Library does
-and what the program that uses the Library does.
-
-  1. You may copy and distribute verbatim copies of the Library's
-complete source code as you receive it, in any medium, provided that
-you conspicuously and appropriately publish on each copy an
-appropriate copyright notice and disclaimer of warranty; keep intact
-all the notices that refer to this License and to the absence of any
-warranty; and distribute a copy of this License along with the
-Library.
-
-  You may charge a fee for the physical act of transferring a copy,
-and you may at your option offer warranty protection in exchange for a
-fee.
-
-  2. You may modify your copy or copies of the Library or any portion
-of it, thus forming a work based on the Library, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
-    a) The modified work must itself be a software library.
-
-    b) You must cause the files modified to carry prominent notices
-    stating that you changed the files and the date of any change.
-
-    c) You must cause the whole of the work to be licensed at no
-    charge to all third parties under the terms of this License.
-
-    d) If a facility in the modified Library refers to a function or a
-    table of data to be supplied by an application program that uses
-    the facility, other than as an argument passed when the facility
-    is invoked, then you must make a good faith effort to ensure that,
-    in the event an application does not supply such function or
-    table, the facility still operates, and performs whatever part of
-    its purpose remains meaningful.
-
-    (For example, a function in a library to compute square roots has
-    a purpose that is entirely well-defined independent of the
-    application.  Therefore, Subsection 2d requires that any
-    application-supplied function or table used by this function must
-    be optional: if the application does not supply it, the square
-    root function must still compute square roots.)
-
-These requirements apply to the modified work as a whole.  If
-identifiable sections of that work are not derived from the Library,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works.  But when you
-distribute the same sections as part of a whole which is a work based
-on the Library, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote
-it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Library.
-
-In addition, mere aggregation of another work not based on the Library
-with the Library (or with a work based on the Library) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
-  3. You may opt to apply the terms of the ordinary GNU General Public
-License instead of this License to a given copy of the Library.  To do
-this, you must alter all the notices that refer to this License, so
-that they refer to the ordinary GNU General Public License, version 2,
-instead of to this License.  (If a newer version than version 2 of the
-ordinary GNU General Public License has appeared, then you can specify
-that version instead if you wish.)  Do not make any other change in
-these notices.
-
-  Once this change is made in a given copy, it is irreversible for
-that copy, so the ordinary GNU General Public License applies to all
-subsequent copies and derivative works made from that copy.
-
-  This option is useful when you wish to copy part of the code of
-the Library into a program that is not a library.
-
-  4. You may copy and distribute the Library (or a portion or
-derivative of it, under Section 2) in object code or executable form
-under the terms of Sections 1 and 2 above provided that you accompany
-it with the complete corresponding machine-readable source code, which
-must be distributed under the terms of Sections 1 and 2 above on a
-medium customarily used for software interchange.
-
-  If distribution of object code is made by offering access to copy
-from a designated place, then offering equivalent access to copy the
-source code from the same place satisfies the requirement to
-distribute the source code, even though third parties are not
-compelled to copy the source along with the object code.
-
-  5. A program that contains no derivative of any portion of the
-Library, but is designed to work with the Library by being compiled or
-linked with it, is called a "work that uses the Library".  Such a
-work, in isolation, is not a derivative work of the Library, and
-therefore falls outside the scope of this License.
-
-  However, linking a "work that uses the Library" with the Library
-creates an executable that is a derivative of the Library (because it
-contains portions of the Library), rather than a "work that uses the
-library".  The executable is therefore covered by this License.
-Section 6 states terms for distribution of such executables.
-
-  When a "work that uses the Library" uses material from a header file
-that is part of the Library, the object code for the work may be a
-derivative work of the Library even though the source code is not.
-Whether this is true is especially significant if the work can be
-linked without the Library, or if the work is itself a library.  The
-threshold for this to be true is not precisely defined by law.
-
-  If such an object file uses only numerical parameters, data
-structure layouts and accessors, and small macros and small inline
-functions (ten lines or less in length), then the use of the object
-file is unrestricted, regardless of whether it is legally a derivative
-work.  (Executables containing this object code plus portions of the
-Library will still fall under Section 6.)
-
-  Otherwise, if the work is a derivative of the Library, you may
-distribute the object code for the work under the terms of Section 6.
-Any executables containing that work also fall under Section 6,
-whether or not they are linked directly with the Library itself.
-
-  6. As an exception to the Sections above, you may also combine or
-link a "work that uses the Library" with the Library to produce a
-work containing portions of the Library, and distribute that work
-under terms of your choice, provided that the terms permit
-modification of the work for the customer's own use and reverse
-engineering for debugging such modifications.
-
-  You must give prominent notice with each copy of the work that the
-Library is used in it and that the Library and its use are covered by
-this License.  You must supply a copy of this License.  If the work
-during execution displays copyright notices, you must include the
-copyright notice for the Library among them, as well as a reference
-directing the user to the copy of this License.  Also, you must do one
-of these things:
-
-    a) Accompany the work with the complete corresponding
-    machine-readable source code for the Library including whatever
-    changes were used in the work (which must be distributed under
-    Sections 1 and 2 above); and, if the work is an executable linked
-    with the Library, with the complete machine-readable "work that
-    uses the Library", as object code and/or source code, so that the
-    user can modify the Library and then relink to produce a modified
-    executable containing the modified Library.  (It is understood
-    that the user who changes the contents of definitions files in the
-    Library will not necessarily be able to recompile the application
-    to use the modified definitions.)
-
-    b) Use a suitable shared library mechanism for linking with the
-    Library.  A suitable mechanism is one that (1) uses at run time a
-    copy of the library already present on the user's computer system,
-    rather than copying library functions into the executable, and (2)
-    will operate properly with a modified version of the library, if
-    the user installs one, as long as the modified version is
-    interface-compatible with the version that the work was made with.
-
-    c) Accompany the work with a written offer, valid for at
-    least three years, to give the same user the materials
-    specified in Subsection 6a, above, for a charge no more
-    than the cost of performing this distribution.
-
-    d) If distribution of the work is made by offering access to copy
-    from a designated place, offer equivalent access to copy the above
-    specified materials from the same place.
-
-    e) Verify that the user has already received a copy of these
-    materials or that you have already sent this user a copy.
-
-  For an executable, the required form of the "work that uses the
-Library" must include any data and utility programs needed for
-reproducing the executable from it.  However, as a special exception,
-the materials to be distributed need not include anything that is
-normally distributed (in either source or binary form) with the major
-components (compiler, kernel, and so on) of the operating system on
-which the executable runs, unless that component itself accompanies
-the executable.
-
-  It may happen that this requirement contradicts the license
-restrictions of other proprietary libraries that do not normally
-accompany the operating system.  Such a contradiction means you cannot
-use both them and the Library together in an executable that you
-distribute.
-
-  7. You may place library facilities that are a work based on the
-Library side-by-side in a single library together with other library
-facilities not covered by this License, and distribute such a combined
-library, provided that the separate distribution of the work based on
-the Library and of the other library facilities is otherwise
-permitted, and provided that you do these two things:
-
-    a) Accompany the combined library with a copy of the same work
-    based on the Library, uncombined with any other library
-    facilities.  This must be distributed under the terms of the
-    Sections above.
-
-    b) Give prominent notice with the combined library of the fact
-    that part of it is a work based on the Library, and explaining
-    where to find the accompanying uncombined form of the same work.
-
-  8. You may not copy, modify, sublicense, link with, or distribute
-the Library except as expressly provided under this License.  Any
-attempt otherwise to copy, modify, sublicense, link with, or
-distribute the Library is void, and will automatically terminate your
-rights under this License.  However, parties who have received copies,
-or rights, from you under this License will not have their licenses
-terminated so long as such parties remain in full compliance.
-
-  9. You are not required to accept this License, since you have not
-signed it.  However, nothing else grants you permission to modify or
-distribute the Library or its derivative works.  These actions are
-prohibited by law if you do not accept this License.  Therefore, by
-modifying or distributing the Library (or any work based on the
-Library), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Library or works based on it.
-
-  10. Each time you redistribute the Library (or any work based on the
-Library), the recipient automatically receives a license from the
-original licensor to copy, distribute, link with or modify the Library
-subject to these terms and conditions.  You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties with
-this License.
-
-  11. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License.  If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Library at all.  For example, if a patent
-license would not permit royalty-free redistribution of the Library by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Library.
-
-If any portion of this section is held invalid or unenforceable under
-any particular circumstance, the balance of the section is intended to
-apply, and the section as a whole is intended to apply in other
-circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system which is
-implemented by public license practices.  Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-
-  12. If the distribution and/or use of the Library is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Library under this License
-may add an explicit geographical distribution limitation excluding those
-countries, so that distribution is permitted only in or among
-countries not thus excluded.  In such case, this License incorporates
-the limitation as if written in the body of this License.
-
-  13. The Free Software Foundation may publish revised and/or new
-versions of the Lesser General Public License from time to time.
-Such new versions will be similar in spirit to the present version,
-but may differ in detail to address new problems or concerns.
-
-Each version is given a distinguishing version number.  If the Library
-specifies a version number of this License which applies to it and
-"any later version", you have the option of following the terms and
-conditions either of that version or of any later version published by
-the Free Software Foundation.  If the Library does not specify a
-license version number, you may choose any version ever published by
-the Free Software Foundation.
-
-  14. If you wish to incorporate parts of the Library into other free
-programs whose distribution conditions are incompatible with these,
-write to the author to ask for permission.  For software which is
-copyrighted by the Free Software Foundation, write to the Free
-Software Foundation; we sometimes make exceptions for this.  Our
-decision will be guided by the two goals of preserving the free status
-of all derivatives of our free software and of promoting the sharing
-and reuse of software generally.
-
-                            NO WARRANTY
-
-  15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO
-WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW.
-EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR
-OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY
-KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
-LIBRARY IS WITH YOU.  SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME
-THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
-
-  16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN
-WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY
-AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU
-FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
-CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
-LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
-RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A
-FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
-SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
-DAMAGES.
-
-                     END OF TERMS AND CONDITIONS
-
diff --git a/main/libresample/Makefile.asterisk b/main/libresample/Makefile.asterisk
deleted file mode 100644
index 815671a2f..000000000
--- a/main/libresample/Makefile.asterisk
+++ /dev/null
@@ -1,11 +0,0 @@
-include $(ASTTOPDIR)/Makefile.moddir_rules
-
-ASTCFLAGS+= -Isrc -Iinclude
-
-libresample.a: src/resample.o src/resamplesubs.o src/filterkit.o
-	$(ECHO_PREFIX) echo "   [AR] $^ -> $@"
-	$(CMD_PREFIX) $(AR) cr $@ $^
-	$(CMD_PREFIX) $(RANLIB) $@
-
-clean::
-	rm -f src/*.o libresample.a
diff --git a/main/libresample/Makefile.in b/main/libresample/Makefile.in
deleted file mode 100644
index 8d17d19b4..000000000
--- a/main/libresample/Makefile.in
+++ /dev/null
@@ -1,52 +0,0 @@
-# Run configure to generate Makefile from Makefile.in on
-# any system supported by GNU autoconf.  For all other
-# systems, use this file as a template to create a
-# working Makefile.
-
-CC = @CC@
-CFLAGS = @CFLAGS@ -Wall
-
-LIBS = @LIBS@ -lm
-
-AR = @AR@
-RANLIB = @RANLIB@
-
-OBJS = \
-	src/resample.c.o \
-	src/resamplesubs.c.o \
-	src/filterkit.c.o
-
-TARGETS = @TARGETS@
-
-all: $(TARGETS)
-
-libresample.a: $(OBJS) Makefile
-	$(AR) ruv libresample.a $(OBJS)
-	ranlib libresample.a
-
-tests/testresample: libresample.a tests/testresample.c
-	$(CC) -o tests/testresample \
-		$(CFLAGS) tests/testresample.c \
-		libresample.a $(LIBS)
-
-tests/compareresample: libresample.a tests/compareresample.c
-	$(CC) -o tests/compareresample \
-		$(CFLAGS) tests/compareresample.c \
-		libresample.a -lsamplerate $(LIBS)
-
-tests/resample-sndfile: libresample.a tests/resample-sndfile.c
-	$(CC) -o tests/resample-sndfile \
-		$(CFLAGS) tests/resample-sndfile.c \
-		libresample.a -lsndfile $(LIBS)
-
-clean:
-	rm -f $(TARGETS) $(OBJS)
-
-distclean: clean
-	rm -f Makefile
-	rm -f config.status config.cache config.log src/config.h
-	rm -f *~ src/*~ tests/*~ include/*~
-
-%.c.o: %.c Makefile include/libresample.h \
-	src/resample_defs.h src/filterkit.h src/config.h
-	$(CC) -c $(CFLAGS) $< -o $@
diff --git a/main/libresample/README.txt b/main/libresample/README.txt
deleted file mode 100644
index 14be45b83..000000000
--- a/main/libresample/README.txt
+++ /dev/null
@@ -1,84 +0,0 @@
-libresample
-
-Real-time library interface by Dominic Mazzoni
-
-Based on resample-1.7:
-  http://www-ccrma.stanford.edu/~jos/resample/
-
-License: LGPL - see the file LICENSE.txt for more information
-
-History:
-
-This library is not the highest-quality resampling library
-available, nor is it the most flexible, nor is it the
-fastest.  But it is pretty good in all of these regards, and
-it is quite portable.  The best resampling library I am aware
-of is libsamplerate by Erik de Castro Lopo.  It's small, fast,
-and very high quality.  However, it uses the GPL for its
-license (with commercial options available) and I needed
-a more free library.  So I wrote this library, using
-the LGPL resample-1.7 library by Julius Smith as a basis.
-
-Resample-1.7 is a fixed-point resampler, and as a result
-has only limited precision.  I rewrote it to use single-precision
-floating-point arithmetic instead and increased the number
-of filter coefficients between time steps significantly.
-On modern processors it can resample in real time even
-with this extra overhead.
-
-Resample-1.7 was designed to read and write from files, so
-I removed all of that code and replaced it with an API that
-lets you pass samples in small chunks.  It should be easy
-to link to resample-1.7 as a library.
-
-Changes in version 0.1.3:
-
-* Fixed two bugs that were causing subtle problems
-  on Intel x86 processors due to differences in roundoff errors.
-
-* Prefixed most function names with lrs and changed header file
-  from resample.h to libresample.h, to avoid namespace
-  collisions with existing programs and libraries.
-
-* Added resample_dup (thanks to Glenn Maynard)
-
-* Argument to resample_get_filter_width takes a const void *
-  (thanks to Glenn Maynard)
-
-* resample-sndfile clips output to -1...1 (thanks to Glenn Maynard)
-
-Usage notes:  
-
-- If the output buffer you pass is too small, resample_process
-  may not use any input samples because its internal output
-  buffer is too full to process any more.  So do not assume
-  that it is an error just because no input samples were
-  consumed.  Just keep passing valid output buffers.
-
-- Given a resampling factor f > 1, and a number of input
-  samples n, the number of output samples should be between
-  floor(n - f) and ceil(n + f).  In other words, if you
-  resample 1000 samples at a factor of 8, the number of
-  output samples might be between 7992 and 8008.  Do not
-  assume that it will be exactly 8000.  If you need exactly
-  8000 outputs, pad the input with extra zeros as necessary.
-
-License and warranty:
-
-All of the files in this package are Copyright 2003 by Dominic
-Mazzoni <dominic@minorninth.com>.  This library was based heavily
-on Resample-1.7, Copyright 1994-2002 by Julius O. Smith III
-<jos@ccrma.stanford.edu>, all rights reserved.
-
-Permission to use and copy is granted subject to the terms of the
-"GNU Lesser General Public License" (LGPL) as published by the
-Free Software Foundation; either version 2.1 of the License,
-or any later version.  In addition, Julius O. Smith III requests
-that a copy of any modified files be sent by email to
-jos@ccrma.stanford.edu so that he may incorporate them into the
-CCRMA version.
-
-   This library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
diff --git a/main/libresample/config.guess b/main/libresample/config.guess
deleted file mode 100755
index e8c6fc0c3..000000000
--- a/main/libresample/config.guess
+++ /dev/null
@@ -1,1432 +0,0 @@
-#! /bin/sh
-# Attempt to guess a canonical system name.
-#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003 Free Software Foundation, Inc.
-
-timestamp='2004-01-05'
-
-# This file is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Originally written by Per Bothner <per@bothner.com>.
-# Please send patches to <config-patches@gnu.org>.  Submit a context
-# diff and a properly formatted ChangeLog entry.
-#
-# This script attempts to guess a canonical system name similar to
-# config.sub.  If it succeeds, it prints the system name on stdout, and
-# exits with 0.  Otherwise, it exits with 1.
-#
-# The plan is that this can be called by configure scripts if you
-# don't specify an explicit build system type.
-
-me=`echo "$0" | sed -e 's,.*/,,'`
-
-usage="\
-Usage: $0 [OPTION]
-
-Output the configuration name of the system \`$me' is run on.
-
-Operation modes:
-  -h, --help         print this help, then exit
-  -t, --time-stamp   print date of last modification, then exit
-  -v, --version      print version number, then exit
-
-Report bugs and patches to <config-patches@gnu.org>."
-
-version="\
-GNU config.guess ($timestamp)
-
-Originally written by Per Bothner.
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
-Free Software Foundation, Inc.
-
-This is free software; see the source for copying conditions.  There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-
-help="
-Try \`$me --help' for more information."
-
-# Parse command line
-while test $# -gt 0 ; do
-  case $1 in
-    --time-stamp | --time* | -t )
-       echo "$timestamp" ; exit 0 ;;
-    --version | -v )
-       echo "$version" ; exit 0 ;;
-    --help | --h* | -h )
-       echo "$usage"; exit 0 ;;
-    -- )     # Stop option processing
-       shift; break ;;
-    - )	# Use stdin as input.
-       break ;;
-    -* )
-       echo "$me: invalid option $1$help" >&2
-       exit 1 ;;
-    * )
-       break ;;
-  esac
-done
-
-if test $# != 0; then
-  echo "$me: too many arguments$help" >&2
-  exit 1
-fi
-
-trap 'exit 1' 1 2 15
-
-# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
-# compiler to aid in system detection is discouraged as it requires
-# temporary files to be created and, as you can see below, it is a
-# headache to deal with in a portable fashion.
-
-# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
-# use `HOST_CC' if defined, but it is deprecated.
-
-# Portable tmp directory creation inspired by the Autoconf team.
-
-set_cc_for_build='
-trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
-trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
-: ${TMPDIR=/tmp} ;
- { tmp=`(umask 077 && mktemp -d -q "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
- { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
- { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
- { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
-dummy=$tmp/dummy ;
-tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
-case $CC_FOR_BUILD,$HOST_CC,$CC in
- ,,)    echo "int x;" > $dummy.c ;
-	for c in cc gcc c89 c99 ; do
-	  if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
-	     CC_FOR_BUILD="$c"; break ;
-	  fi ;
-	done ;
-	if test x"$CC_FOR_BUILD" = x ; then
-	  CC_FOR_BUILD=no_compiler_found ;
-	fi
-	;;
- ,,*)   CC_FOR_BUILD=$CC ;;
- ,*,*)  CC_FOR_BUILD=$HOST_CC ;;
-esac ;'
-
-# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
-# (ghazi@noc.rutgers.edu 1994-08-24)
-if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
-	PATH=$PATH:/.attbin ; export PATH
-fi
-
-UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
-UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
-UNAME_SYSTEM=`(uname -s) 2>/dev/null`  || UNAME_SYSTEM=unknown
-UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
-
-# Note: order is significant - the case branches are not exclusive.
-
-case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
-    *:NetBSD:*:*)
-	# NetBSD (nbsd) targets should (where applicable) match one or
-	# more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
-	# *-*-netbsdecoff* and *-*-netbsd*.  For targets that recently
-	# switched to ELF, *-*-netbsd* would select the old
-	# object file format.  This provides both forward
-	# compatibility and a consistent mechanism for selecting the
-	# object file format.
-	#
-	# Note: NetBSD doesn't particularly care about the vendor
-	# portion of the name.  We always set it to "unknown".
-	sysctl="sysctl -n hw.machine_arch"
-	UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
-	    /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
-	case "${UNAME_MACHINE_ARCH}" in
-	    armeb) machine=armeb-unknown ;;
-	    arm*) machine=arm-unknown ;;
-	    sh3el) machine=shl-unknown ;;
-	    sh3eb) machine=sh-unknown ;;
-	    *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
-	esac
-	# The Operating System including object format, if it has switched
-	# to ELF recently, or will in the future.
-	case "${UNAME_MACHINE_ARCH}" in
-	    arm*|i386|m68k|ns32k|sh3*|sparc|vax)
-		eval $set_cc_for_build
-		if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
-			| grep __ELF__ >/dev/null
-		then
-		    # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
-		    # Return netbsd for either.  FIX?
-		    os=netbsd
-		else
-		    os=netbsdelf
-		fi
-		;;
-	    *)
-	        os=netbsd
-		;;
-	esac
-	# The OS release
-	# Debian GNU/NetBSD machines have a different userland, and
-	# thus, need a distinct triplet. However, they do not need
-	# kernel version information, so it can be replaced with a
-	# suitable tag, in the style of linux-gnu.
-	case "${UNAME_VERSION}" in
-	    Debian*)
-		release='-gnu'
-		;;
-	    *)
-		release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
-		;;
-	esac
-	# Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
-	# contains redundant information, the shorter form:
-	# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
-	echo "${machine}-${os}${release}"
-	exit 0 ;;
-    amiga:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    arc:OpenBSD:*:*)
-	echo mipsel-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    hp300:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    mac68k:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    macppc:OpenBSD:*:*)
-	echo powerpc-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    mvme68k:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    mvme88k:OpenBSD:*:*)
-	echo m88k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    mvmeppc:OpenBSD:*:*)
-	echo powerpc-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    pegasos:OpenBSD:*:*)
-	echo powerpc-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    pmax:OpenBSD:*:*)
-	echo mipsel-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    sgi:OpenBSD:*:*)
-	echo mipseb-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    sun3:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    wgrisc:OpenBSD:*:*)
-	echo mipsel-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    *:OpenBSD:*:*)
-	echo ${UNAME_MACHINE}-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    alpha:OSF1:*:*)
-	if test $UNAME_RELEASE = "V4.0"; then
-		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
-	fi
-	# According to Compaq, /usr/sbin/psrinfo has been available on
-	# OSF/1 and Tru64 systems produced since 1995.  I hope that
-	# covers most systems running today.  This code pipes the CPU
-	# types through head -n 1, so we only detect the type of CPU 0.
-	ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^  The alpha \(.*\) processor.*$/\1/p' | head -n 1`
-	case "$ALPHA_CPU_TYPE" in
-	    "EV4 (21064)")
-		UNAME_MACHINE="alpha" ;;
-	    "EV4.5 (21064)")
-		UNAME_MACHINE="alpha" ;;
-	    "LCA4 (21066/21068)")
-		UNAME_MACHINE="alpha" ;;
-	    "EV5 (21164)")
-		UNAME_MACHINE="alphaev5" ;;
-	    "EV5.6 (21164A)")
-		UNAME_MACHINE="alphaev56" ;;
-	    "EV5.6 (21164PC)")
-		UNAME_MACHINE="alphapca56" ;;
-	    "EV5.7 (21164PC)")
-		UNAME_MACHINE="alphapca57" ;;
-	    "EV6 (21264)")
-		UNAME_MACHINE="alphaev6" ;;
-	    "EV6.7 (21264A)")
-		UNAME_MACHINE="alphaev67" ;;
-	    "EV6.8CB (21264C)")
-		UNAME_MACHINE="alphaev68" ;;
-	    "EV6.8AL (21264B)")
-		UNAME_MACHINE="alphaev68" ;;
-	    "EV6.8CX (21264D)")
-		UNAME_MACHINE="alphaev68" ;;
-	    "EV6.9A (21264/EV69A)")
-		UNAME_MACHINE="alphaev69" ;;
-	    "EV7 (21364)")
-		UNAME_MACHINE="alphaev7" ;;
-	    "EV7.9 (21364A)")
-		UNAME_MACHINE="alphaev79" ;;
-	esac
-	# A Vn.n version is a released version.
-	# A Tn.n version is a released field test version.
-	# A Xn.n version is an unreleased experimental baselevel.
-	# 1.2 uses "1.2" for uname -r.
-	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
-	exit 0 ;;
-    Alpha*:OpenVMS:*:*)
-	echo alpha-hp-vms
-	exit 0 ;;
-    Alpha\ *:Windows_NT*:*)
-	# How do we know it's Interix rather than the generic POSIX subsystem?
-	# Should we change UNAME_MACHINE based on the output of uname instead
-	# of the specific Alpha model?
-	echo alpha-pc-interix
-	exit 0 ;;
-    21064:Windows_NT:50:3)
-	echo alpha-dec-winnt3.5
-	exit 0 ;;
-    Amiga*:UNIX_System_V:4.0:*)
-	echo m68k-unknown-sysv4
-	exit 0;;
-    *:[Aa]miga[Oo][Ss]:*:*)
-	echo ${UNAME_MACHINE}-unknown-amigaos
-	exit 0 ;;
-    *:[Mm]orph[Oo][Ss]:*:*)
-	echo ${UNAME_MACHINE}-unknown-morphos
-	exit 0 ;;
-    *:OS/390:*:*)
-	echo i370-ibm-openedition
-	exit 0 ;;
-    *:OS400:*:*)
-        echo powerpc-ibm-os400
-	exit 0 ;;
-    arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
-	echo arm-acorn-riscix${UNAME_RELEASE}
-	exit 0;;
-    SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
-	echo hppa1.1-hitachi-hiuxmpp
-	exit 0;;
-    Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
-	# akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
-	if test "`(/bin/universe) 2>/dev/null`" = att ; then
-		echo pyramid-pyramid-sysv3
-	else
-		echo pyramid-pyramid-bsd
-	fi
-	exit 0 ;;
-    NILE*:*:*:dcosx)
-	echo pyramid-pyramid-svr4
-	exit 0 ;;
-    DRS?6000:unix:4.0:6*)
-	echo sparc-icl-nx6
-	exit 0 ;;
-    DRS?6000:UNIX_SV:4.2*:7*)
-	case `/usr/bin/uname -p` in
-	    sparc) echo sparc-icl-nx7 && exit 0 ;;
-	esac ;;
-    sun4H:SunOS:5.*:*)
-	echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit 0 ;;
-    sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
-	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit 0 ;;
-    i86pc:SunOS:5.*:*)
-	echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit 0 ;;
-    sun4*:SunOS:6*:*)
-	# According to config.sub, this is the proper way to canonicalize
-	# SunOS6.  Hard to guess exactly what SunOS6 will be like, but
-	# it's likely to be more like Solaris than SunOS4.
-	echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit 0 ;;
-    sun4*:SunOS:*:*)
-	case "`/usr/bin/arch -k`" in
-	    Series*|S4*)
-		UNAME_RELEASE=`uname -v`
-		;;
-	esac
-	# Japanese Language versions have a version number like `4.1.3-JL'.
-	echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
-	exit 0 ;;
-    sun3*:SunOS:*:*)
-	echo m68k-sun-sunos${UNAME_RELEASE}
-	exit 0 ;;
-    sun*:*:4.2BSD:*)
-	UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
-	test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
-	case "`/bin/arch`" in
-	    sun3)
-		echo m68k-sun-sunos${UNAME_RELEASE}
-		;;
-	    sun4)
-		echo sparc-sun-sunos${UNAME_RELEASE}
-		;;
-	esac
-	exit 0 ;;
-    aushp:SunOS:*:*)
-	echo sparc-auspex-sunos${UNAME_RELEASE}
-	exit 0 ;;
-    # The situation for MiNT is a little confusing.  The machine name
-    # can be virtually everything (everything which is not
-    # "atarist" or "atariste" at least should have a processor
-    # > m68000).  The system name ranges from "MiNT" over "FreeMiNT"
-    # to the lowercase version "mint" (or "freemint").  Finally
-    # the system name "TOS" denotes a system which is actually not
-    # MiNT.  But MiNT is downward compatible to TOS, so this should
-    # be no problem.
-    atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
-        echo m68k-atari-mint${UNAME_RELEASE}
-	exit 0 ;;
-    atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
-	echo m68k-atari-mint${UNAME_RELEASE}
-        exit 0 ;;
-    *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
-        echo m68k-atari-mint${UNAME_RELEASE}
-	exit 0 ;;
-    milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
-        echo m68k-milan-mint${UNAME_RELEASE}
-        exit 0 ;;
-    hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
-        echo m68k-hades-mint${UNAME_RELEASE}
-        exit 0 ;;
-    *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
-        echo m68k-unknown-mint${UNAME_RELEASE}
-        exit 0 ;;
-    powerpc:machten:*:*)
-	echo powerpc-apple-machten${UNAME_RELEASE}
-	exit 0 ;;
-    RISC*:Mach:*:*)
-	echo mips-dec-mach_bsd4.3
-	exit 0 ;;
-    RISC*:ULTRIX:*:*)
-	echo mips-dec-ultrix${UNAME_RELEASE}
-	exit 0 ;;
-    VAX*:ULTRIX*:*:*)
-	echo vax-dec-ultrix${UNAME_RELEASE}
-	exit 0 ;;
-    2020:CLIX:*:* | 2430:CLIX:*:*)
-	echo clipper-intergraph-clix${UNAME_RELEASE}
-	exit 0 ;;
-    mips:*:*:UMIPS | mips:*:*:RISCos)
-	eval $set_cc_for_build
-	sed 's/^	//' << EOF >$dummy.c
-#ifdef __cplusplus
-#include <stdio.h>  /* for printf() prototype */
-	int main (int argc, char *argv[]) {
-#else
-	int main (argc, argv) int argc; char *argv[]; {
-#endif
-	#if defined (host_mips) && defined (MIPSEB)
-	#if defined (SYSTYPE_SYSV)
-	  printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
-	#endif
-	#if defined (SYSTYPE_SVR4)
-	  printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
-	#endif
-	#if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
-	  printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
-	#endif
-	#endif
-	  exit (-1);
-	}
-EOF
-	$CC_FOR_BUILD -o $dummy $dummy.c \
-	  && $dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
-	  && exit 0
-	echo mips-mips-riscos${UNAME_RELEASE}
-	exit 0 ;;
-    Motorola:PowerMAX_OS:*:*)
-	echo powerpc-motorola-powermax
-	exit 0 ;;
-    Motorola:*:4.3:PL8-*)
-	echo powerpc-harris-powermax
-	exit 0 ;;
-    Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
-	echo powerpc-harris-powermax
-	exit 0 ;;
-    Night_Hawk:Power_UNIX:*:*)
-	echo powerpc-harris-powerunix
-	exit 0 ;;
-    m88k:CX/UX:7*:*)
-	echo m88k-harris-cxux7
-	exit 0 ;;
-    m88k:*:4*:R4*)
-	echo m88k-motorola-sysv4
-	exit 0 ;;
-    m88k:*:3*:R3*)
-	echo m88k-motorola-sysv3
-	exit 0 ;;
-    AViiON:dgux:*:*)
-        # DG/UX returns AViiON for all architectures
-        UNAME_PROCESSOR=`/usr/bin/uname -p`
-	if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
-	then
-	    if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
-	       [ ${TARGET_BINARY_INTERFACE}x = x ]
-	    then
-		echo m88k-dg-dgux${UNAME_RELEASE}
-	    else
-		echo m88k-dg-dguxbcs${UNAME_RELEASE}
-	    fi
-	else
-	    echo i586-dg-dgux${UNAME_RELEASE}
-	fi
- 	exit 0 ;;
-    M88*:DolphinOS:*:*)	# DolphinOS (SVR3)
-	echo m88k-dolphin-sysv3
-	exit 0 ;;
-    M88*:*:R3*:*)
-	# Delta 88k system running SVR3
-	echo m88k-motorola-sysv3
-	exit 0 ;;
-    XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
-	echo m88k-tektronix-sysv3
-	exit 0 ;;
-    Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
-	echo m68k-tektronix-bsd
-	exit 0 ;;
-    *:IRIX*:*:*)
-	echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
-	exit 0 ;;
-    ????????:AIX?:[12].1:2)   # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
-	echo romp-ibm-aix      # uname -m gives an 8 hex-code CPU id
-	exit 0 ;;              # Note that: echo "'`uname -s`'" gives 'AIX '
-    i*86:AIX:*:*)
-	echo i386-ibm-aix
-	exit 0 ;;
-    ia64:AIX:*:*)
-	if [ -x /usr/bin/oslevel ] ; then
-		IBM_REV=`/usr/bin/oslevel`
-	else
-		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
-	fi
-	echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
-	exit 0 ;;
-    *:AIX:2:3)
-	if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
-		eval $set_cc_for_build
-		sed 's/^		//' << EOF >$dummy.c
-		#include <sys/systemcfg.h>
-
-		main()
-			{
-			if (!__power_pc())
-				exit(1);
-			puts("powerpc-ibm-aix3.2.5");
-			exit(0);
-			}
-EOF
-		$CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0
-		echo rs6000-ibm-aix3.2.5
-	elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
-		echo rs6000-ibm-aix3.2.4
-	else
-		echo rs6000-ibm-aix3.2
-	fi
-	exit 0 ;;
-    *:AIX:*:[45])
-	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
-	if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
-		IBM_ARCH=rs6000
-	else
-		IBM_ARCH=powerpc
-	fi
-	if [ -x /usr/bin/oslevel ] ; then
-		IBM_REV=`/usr/bin/oslevel`
-	else
-		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
-	fi
-	echo ${IBM_ARCH}-ibm-aix${IBM_REV}
-	exit 0 ;;
-    *:AIX:*:*)
-	echo rs6000-ibm-aix
-	exit 0 ;;
-    ibmrt:4.4BSD:*|romp-ibm:BSD:*)
-	echo romp-ibm-bsd4.4
-	exit 0 ;;
-    ibmrt:*BSD:*|romp-ibm:BSD:*)            # covers RT/PC BSD and
-	echo romp-ibm-bsd${UNAME_RELEASE}   # 4.3 with uname added to
-	exit 0 ;;                           # report: romp-ibm BSD 4.3
-    *:BOSX:*:*)
-	echo rs6000-bull-bosx
-	exit 0 ;;
-    DPX/2?00:B.O.S.:*:*)
-	echo m68k-bull-sysv3
-	exit 0 ;;
-    9000/[34]??:4.3bsd:1.*:*)
-	echo m68k-hp-bsd
-	exit 0 ;;
-    hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
-	echo m68k-hp-bsd4.4
-	exit 0 ;;
-    9000/[34678]??:HP-UX:*:*)
-	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
-	case "${UNAME_MACHINE}" in
-	    9000/31? )            HP_ARCH=m68000 ;;
-	    9000/[34]?? )         HP_ARCH=m68k ;;
-	    9000/[678][0-9][0-9])
-		if [ -x /usr/bin/getconf ]; then
-		    sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
-                    sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
-                    case "${sc_cpu_version}" in
-                      523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
-                      528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
-                      532)                      # CPU_PA_RISC2_0
-                        case "${sc_kernel_bits}" in
-                          32) HP_ARCH="hppa2.0n" ;;
-                          64) HP_ARCH="hppa2.0w" ;;
-			  '') HP_ARCH="hppa2.0" ;;   # HP-UX 10.20
-                        esac ;;
-                    esac
-		fi
-		if [ "${HP_ARCH}" = "" ]; then
-		    eval $set_cc_for_build
-		    sed 's/^              //' << EOF >$dummy.c
-
-              #define _HPUX_SOURCE
-              #include <stdlib.h>
-              #include <unistd.h>
-
-              int main ()
-              {
-              #if defined(_SC_KERNEL_BITS)
-                  long bits = sysconf(_SC_KERNEL_BITS);
-              #endif
-                  long cpu  = sysconf (_SC_CPU_VERSION);
-
-                  switch (cpu)
-              	{
-              	case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
-              	case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
-              	case CPU_PA_RISC2_0:
-              #if defined(_SC_KERNEL_BITS)
-              	    switch (bits)
-              		{
-              		case 64: puts ("hppa2.0w"); break;
-              		case 32: puts ("hppa2.0n"); break;
-              		default: puts ("hppa2.0"); break;
-              		} break;
-              #else  /* !defined(_SC_KERNEL_BITS) */
-              	    puts ("hppa2.0"); break;
-              #endif
-              	default: puts ("hppa1.0"); break;
-              	}
-                  exit (0);
-              }
-EOF
-		    (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
-		    test -z "$HP_ARCH" && HP_ARCH=hppa
-		fi ;;
-	esac
-	if [ ${HP_ARCH} = "hppa2.0w" ]
-	then
-	    # avoid double evaluation of $set_cc_for_build
-	    test -n "$CC_FOR_BUILD" || eval $set_cc_for_build
-	    if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E -) | grep __LP64__ >/dev/null
-	    then
-		HP_ARCH="hppa2.0w"
-	    else
-		HP_ARCH="hppa64"
-	    fi
-	fi
-	echo ${HP_ARCH}-hp-hpux${HPUX_REV}
-	exit 0 ;;
-    ia64:HP-UX:*:*)
-	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
-	echo ia64-hp-hpux${HPUX_REV}
-	exit 0 ;;
-    3050*:HI-UX:*:*)
-	eval $set_cc_for_build
-	sed 's/^	//' << EOF >$dummy.c
-	#include <unistd.h>
-	int
-	main ()
-	{
-	  long cpu = sysconf (_SC_CPU_VERSION);
-	  /* The order matters, because CPU_IS_HP_MC68K erroneously returns
-	     true for CPU_PA_RISC1_0.  CPU_IS_PA_RISC returns correct
-	     results, however.  */
-	  if (CPU_IS_PA_RISC (cpu))
-	    {
-	      switch (cpu)
-		{
-		  case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
-		  case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
-		  case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
-		  default: puts ("hppa-hitachi-hiuxwe2"); break;
-		}
-	    }
-	  else if (CPU_IS_HP_MC68K (cpu))
-	    puts ("m68k-hitachi-hiuxwe2");
-	  else puts ("unknown-hitachi-hiuxwe2");
-	  exit (0);
-	}
-EOF
-	$CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0
-	echo unknown-hitachi-hiuxwe2
-	exit 0 ;;
-    9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
-	echo hppa1.1-hp-bsd
-	exit 0 ;;
-    9000/8??:4.3bsd:*:*)
-	echo hppa1.0-hp-bsd
-	exit 0 ;;
-    *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
-	echo hppa1.0-hp-mpeix
-	exit 0 ;;
-    hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
-	echo hppa1.1-hp-osf
-	exit 0 ;;
-    hp8??:OSF1:*:*)
-	echo hppa1.0-hp-osf
-	exit 0 ;;
-    i*86:OSF1:*:*)
-	if [ -x /usr/sbin/sysversion ] ; then
-	    echo ${UNAME_MACHINE}-unknown-osf1mk
-	else
-	    echo ${UNAME_MACHINE}-unknown-osf1
-	fi
-	exit 0 ;;
-    parisc*:Lites*:*:*)
-	echo hppa1.1-hp-lites
-	exit 0 ;;
-    C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
-	echo c1-convex-bsd
-        exit 0 ;;
-    C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
-	if getsysinfo -f scalar_acc
-	then echo c32-convex-bsd
-	else echo c2-convex-bsd
-	fi
-        exit 0 ;;
-    C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
-	echo c34-convex-bsd
-        exit 0 ;;
-    C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
-	echo c38-convex-bsd
-        exit 0 ;;
-    C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
-	echo c4-convex-bsd
-        exit 0 ;;
-    CRAY*Y-MP:*:*:*)
-	echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-	exit 0 ;;
-    CRAY*[A-Z]90:*:*:*)
-	echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
-	| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
-	      -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
-	      -e 's/\.[^.]*$/.X/'
-	exit 0 ;;
-    CRAY*TS:*:*:*)
-	echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-	exit 0 ;;
-    CRAY*T3E:*:*:*)
-	echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-	exit 0 ;;
-    CRAY*SV1:*:*:*)
-	echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-	exit 0 ;;
-    *:UNICOS/mp:*:*)
-	echo nv1-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-	exit 0 ;;
-    F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
-	FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
-        FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
-        FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
-        echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
-        exit 0 ;;
-    5000:UNIX_System_V:4.*:*)
-        FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
-        FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
-        echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
-	exit 0 ;;
-    i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
-	echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
-	exit 0 ;;
-    sparc*:BSD/OS:*:*)
-	echo sparc-unknown-bsdi${UNAME_RELEASE}
-	exit 0 ;;
-    *:BSD/OS:*:*)
-	echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
-	exit 0 ;;
-    *:FreeBSD:*:*)
-	# Determine whether the default compiler uses glibc.
-	eval $set_cc_for_build
-	sed 's/^	//' << EOF >$dummy.c
-	#include <features.h>
-	#if __GLIBC__ >= 2
-	LIBC=gnu
-	#else
-	LIBC=
-	#endif
-EOF
-	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
-	# GNU/KFreeBSD systems have a "k" prefix to indicate we are using
-	# FreeBSD's kernel, but not the complete OS.
-	case ${LIBC} in gnu) kernel_only='k' ;; esac
-	echo ${UNAME_MACHINE}-unknown-${kernel_only}freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`${LIBC:+-$LIBC}
-	exit 0 ;;
-    i*:CYGWIN*:*)
-	echo ${UNAME_MACHINE}-pc-cygwin
-	exit 0 ;;
-    i*:MINGW*:*)
-	echo ${UNAME_MACHINE}-pc-mingw32
-	exit 0 ;;
-    i*:PW*:*)
-	echo ${UNAME_MACHINE}-pc-pw32
-	exit 0 ;;
-    x86:Interix*:[34]*)
-	echo i586-pc-interix${UNAME_RELEASE}|sed -e 's/\..*//'
-	exit 0 ;;
-    [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
-	echo i${UNAME_MACHINE}-pc-mks
-	exit 0 ;;
-    i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
-	# How do we know it's Interix rather than the generic POSIX subsystem?
-	# It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
-	# UNAME_MACHINE based on the output of uname instead of i386?
-	echo i586-pc-interix
-	exit 0 ;;
-    i*:UWIN*:*)
-	echo ${UNAME_MACHINE}-pc-uwin
-	exit 0 ;;
-    p*:CYGWIN*:*)
-	echo powerpcle-unknown-cygwin
-	exit 0 ;;
-    prep*:SunOS:5.*:*)
-	echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit 0 ;;
-    *:GNU:*:*)
-	# the GNU system
-	echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
-	exit 0 ;;
-    *:GNU/*:*:*)
-	# other systems with GNU libc and userland
-	echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
-	exit 0 ;;
-    i*86:Minix:*:*)
-	echo ${UNAME_MACHINE}-pc-minix
-	exit 0 ;;
-    arm*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit 0 ;;
-    cris:Linux:*:*)
-	echo cris-axis-linux-gnu
-	exit 0 ;;
-    ia64:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit 0 ;;
-    m68*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit 0 ;;
-    mips:Linux:*:*)
-	eval $set_cc_for_build
-	sed 's/^	//' << EOF >$dummy.c
-	#undef CPU
-	#undef mips
-	#undef mipsel
-	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
-	CPU=mipsel
-	#else
-	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
-	CPU=mips
-	#else
-	CPU=
-	#endif
-	#endif
-EOF
-	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
-	test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0
-	;;
-    mips64:Linux:*:*)
-	eval $set_cc_for_build
-	sed 's/^	//' << EOF >$dummy.c
-	#undef CPU
-	#undef mips64
-	#undef mips64el
-	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
-	CPU=mips64el
-	#else
-	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
-	CPU=mips64
-	#else
-	CPU=
-	#endif
-	#endif
-EOF
-	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
-	test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0
-	;;
-    ppc:Linux:*:*)
-	echo powerpc-unknown-linux-gnu
-	exit 0 ;;
-    ppc64:Linux:*:*)
-	echo powerpc64-unknown-linux-gnu
-	exit 0 ;;
-    alpha:Linux:*:*)
-	case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
-	  EV5)   UNAME_MACHINE=alphaev5 ;;
-	  EV56)  UNAME_MACHINE=alphaev56 ;;
-	  PCA56) UNAME_MACHINE=alphapca56 ;;
-	  PCA57) UNAME_MACHINE=alphapca56 ;;
-	  EV6)   UNAME_MACHINE=alphaev6 ;;
-	  EV67)  UNAME_MACHINE=alphaev67 ;;
-	  EV68*) UNAME_MACHINE=alphaev68 ;;
-        esac
-	objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null
-	if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
-	echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
-	exit 0 ;;
-    parisc:Linux:*:* | hppa:Linux:*:*)
-	# Look for CPU level
-	case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
-	  PA7*) echo hppa1.1-unknown-linux-gnu ;;
-	  PA8*) echo hppa2.0-unknown-linux-gnu ;;
-	  *)    echo hppa-unknown-linux-gnu ;;
-	esac
-	exit 0 ;;
-    parisc64:Linux:*:* | hppa64:Linux:*:*)
-	echo hppa64-unknown-linux-gnu
-	exit 0 ;;
-    s390:Linux:*:* | s390x:Linux:*:*)
-	echo ${UNAME_MACHINE}-ibm-linux
-	exit 0 ;;
-    sh64*:Linux:*:*)
-    	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit 0 ;;
-    sh*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit 0 ;;
-    sparc:Linux:*:* | sparc64:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit 0 ;;
-    x86_64:Linux:*:*)
-	echo x86_64-unknown-linux-gnu
-	exit 0 ;;
-    i*86:Linux:*:*)
-	# The BFD linker knows what the default object file format is, so
-	# first see if it will tell us. cd to the root directory to prevent
-	# problems with other programs or directories called `ld' in the path.
-	# Set LC_ALL=C to ensure ld outputs messages in English.
-	ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \
-			 | sed -ne '/supported targets:/!d
-				    s/[ 	][ 	]*/ /g
-				    s/.*supported targets: *//
-				    s/ .*//
-				    p'`
-        case "$ld_supported_targets" in
-	  elf32-i386)
-		TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu"
-		;;
-	  a.out-i386-linux)
-		echo "${UNAME_MACHINE}-pc-linux-gnuaout"
-		exit 0 ;;
-	  coff-i386)
-		echo "${UNAME_MACHINE}-pc-linux-gnucoff"
-		exit 0 ;;
-	  "")
-		# Either a pre-BFD a.out linker (linux-gnuoldld) or
-		# one that does not give us useful --help.
-		echo "${UNAME_MACHINE}-pc-linux-gnuoldld"
-		exit 0 ;;
-	esac
-	# Determine whether the default compiler is a.out or elf
-	eval $set_cc_for_build
-	sed 's/^	//' << EOF >$dummy.c
-	#include <features.h>
-	#ifdef __ELF__
-	# ifdef __GLIBC__
-	#  if __GLIBC__ >= 2
-	LIBC=gnu
-	#  else
-	LIBC=gnulibc1
-	#  endif
-	# else
-	LIBC=gnulibc1
-	# endif
-	#else
-	#ifdef __INTEL_COMPILER
-	LIBC=gnu
-	#else
-	LIBC=gnuaout
-	#endif
-	#endif
-	#ifdef __dietlibc__
-	LIBC=dietlibc
-	#endif
-EOF
-	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
-	test x"${LIBC}" != x && echo "${UNAME_MACHINE}-pc-linux-${LIBC}" && exit 0
-	test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0
-	;;
-    i*86:DYNIX/ptx:4*:*)
-	# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
-	# earlier versions are messed up and put the nodename in both
-	# sysname and nodename.
-	echo i386-sequent-sysv4
-	exit 0 ;;
-    i*86:UNIX_SV:4.2MP:2.*)
-        # Unixware is an offshoot of SVR4, but it has its own version
-        # number series starting with 2...
-        # I am not positive that other SVR4 systems won't match this,
-	# I just have to hope.  -- rms.
-        # Use sysv4.2uw... so that sysv4* matches it.
-	echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
-	exit 0 ;;
-    i*86:OS/2:*:*)
-	# If we were able to find `uname', then EMX Unix compatibility
-	# is probably installed.
-	echo ${UNAME_MACHINE}-pc-os2-emx
-	exit 0 ;;
-    i*86:XTS-300:*:STOP)
-	echo ${UNAME_MACHINE}-unknown-stop
-	exit 0 ;;
-    i*86:atheos:*:*)
-	echo ${UNAME_MACHINE}-unknown-atheos
-	exit 0 ;;
-	i*86:syllable:*:*)
-	echo ${UNAME_MACHINE}-pc-syllable
-	exit 0 ;;
-    i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
-	echo i386-unknown-lynxos${UNAME_RELEASE}
-	exit 0 ;;
-    i*86:*DOS:*:*)
-	echo ${UNAME_MACHINE}-pc-msdosdjgpp
-	exit 0 ;;
-    i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
-	UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
-	if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
-		echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
-	else
-		echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
-	fi
-	exit 0 ;;
-    i*86:*:5:[78]*)
-	case `/bin/uname -X | grep "^Machine"` in
-	    *486*)	     UNAME_MACHINE=i486 ;;
-	    *Pentium)	     UNAME_MACHINE=i586 ;;
-	    *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
-	esac
-	echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
-	exit 0 ;;
-    i*86:*:3.2:*)
-	if test -f /usr/options/cb.name; then
-		UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
-		echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
-	elif /bin/uname -X 2>/dev/null >/dev/null ; then
-		UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
-		(/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
-		(/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
-			&& UNAME_MACHINE=i586
-		(/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
-			&& UNAME_MACHINE=i686
-		(/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
-			&& UNAME_MACHINE=i686
-		echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
-	else
-		echo ${UNAME_MACHINE}-pc-sysv32
-	fi
-	exit 0 ;;
-    pc:*:*:*)
-	# Left here for compatibility:
-        # uname -m prints for DJGPP always 'pc', but it prints nothing about
-        # the processor, so we play safe by assuming i386.
-	echo i386-pc-msdosdjgpp
-        exit 0 ;;
-    Intel:Mach:3*:*)
-	echo i386-pc-mach3
-	exit 0 ;;
-    paragon:*:*:*)
-	echo i860-intel-osf1
-	exit 0 ;;
-    i860:*:4.*:*) # i860-SVR4
-	if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
-	  echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
-	else # Add other i860-SVR4 vendors below as they are discovered.
-	  echo i860-unknown-sysv${UNAME_RELEASE}  # Unknown i860-SVR4
-	fi
-	exit 0 ;;
-    mini*:CTIX:SYS*5:*)
-	# "miniframe"
-	echo m68010-convergent-sysv
-	exit 0 ;;
-    mc68k:UNIX:SYSTEM5:3.51m)
-	echo m68k-convergent-sysv
-	exit 0 ;;
-    M680?0:D-NIX:5.3:*)
-	echo m68k-diab-dnix
-	exit 0 ;;
-    M68*:*:R3V[567]*:*)
-	test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
-    3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0)
-	OS_REL=''
-	test -r /etc/.relid \
-	&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
-	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
-	  && echo i486-ncr-sysv4.3${OS_REL} && exit 0
-	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
-	  && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;;
-    3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
-        /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
-          && echo i486-ncr-sysv4 && exit 0 ;;
-    m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
-	echo m68k-unknown-lynxos${UNAME_RELEASE}
-	exit 0 ;;
-    mc68030:UNIX_System_V:4.*:*)
-	echo m68k-atari-sysv4
-	exit 0 ;;
-    TSUNAMI:LynxOS:2.*:*)
-	echo sparc-unknown-lynxos${UNAME_RELEASE}
-	exit 0 ;;
-    rs6000:LynxOS:2.*:*)
-	echo rs6000-unknown-lynxos${UNAME_RELEASE}
-	exit 0 ;;
-    PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*)
-	echo powerpc-unknown-lynxos${UNAME_RELEASE}
-	exit 0 ;;
-    SM[BE]S:UNIX_SV:*:*)
-	echo mips-dde-sysv${UNAME_RELEASE}
-	exit 0 ;;
-    RM*:ReliantUNIX-*:*:*)
-	echo mips-sni-sysv4
-	exit 0 ;;
-    RM*:SINIX-*:*:*)
-	echo mips-sni-sysv4
-	exit 0 ;;
-    *:SINIX-*:*:*)
-	if uname -p 2>/dev/null >/dev/null ; then
-		UNAME_MACHINE=`(uname -p) 2>/dev/null`
-		echo ${UNAME_MACHINE}-sni-sysv4
-	else
-		echo ns32k-sni-sysv
-	fi
-	exit 0 ;;
-    PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
-                      # says <Richard.M.Bartel@ccMail.Census.GOV>
-        echo i586-unisys-sysv4
-        exit 0 ;;
-    *:UNIX_System_V:4*:FTX*)
-	# From Gerald Hewes <hewes@openmarket.com>.
-	# How about differentiating between stratus architectures? -djm
-	echo hppa1.1-stratus-sysv4
-	exit 0 ;;
-    *:*:*:FTX*)
-	# From seanf@swdc.stratus.com.
-	echo i860-stratus-sysv4
-	exit 0 ;;
-    *:VOS:*:*)
-	# From Paul.Green@stratus.com.
-	echo hppa1.1-stratus-vos
-	exit 0 ;;
-    mc68*:A/UX:*:*)
-	echo m68k-apple-aux${UNAME_RELEASE}
-	exit 0 ;;
-    news*:NEWS-OS:6*:*)
-	echo mips-sony-newsos6
-	exit 0 ;;
-    R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
-	if [ -d /usr/nec ]; then
-	        echo mips-nec-sysv${UNAME_RELEASE}
-	else
-	        echo mips-unknown-sysv${UNAME_RELEASE}
-	fi
-        exit 0 ;;
-    BeBox:BeOS:*:*)	# BeOS running on hardware made by Be, PPC only.
-	echo powerpc-be-beos
-	exit 0 ;;
-    BeMac:BeOS:*:*)	# BeOS running on Mac or Mac clone, PPC only.
-	echo powerpc-apple-beos
-	exit 0 ;;
-    BePC:BeOS:*:*)	# BeOS running on Intel PC compatible.
-	echo i586-pc-beos
-	exit 0 ;;
-    SX-4:SUPER-UX:*:*)
-	echo sx4-nec-superux${UNAME_RELEASE}
-	exit 0 ;;
-    SX-5:SUPER-UX:*:*)
-	echo sx5-nec-superux${UNAME_RELEASE}
-	exit 0 ;;
-    SX-6:SUPER-UX:*:*)
-	echo sx6-nec-superux${UNAME_RELEASE}
-	exit 0 ;;
-    Power*:Rhapsody:*:*)
-	echo powerpc-apple-rhapsody${UNAME_RELEASE}
-	exit 0 ;;
-    *:Rhapsody:*:*)
-	echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
-	exit 0 ;;
-    *:Darwin:*:*)
-	case `uname -p` in
-	    *86) UNAME_PROCESSOR=i686 ;;
-	    powerpc) UNAME_PROCESSOR=powerpc ;;
-	esac
-	echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
-	exit 0 ;;
-    *:procnto*:*:* | *:QNX:[0123456789]*:*)
-	UNAME_PROCESSOR=`uname -p`
-	if test "$UNAME_PROCESSOR" = "x86"; then
-		UNAME_PROCESSOR=i386
-		UNAME_MACHINE=pc
-	fi
-	echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
-	exit 0 ;;
-    *:QNX:*:4*)
-	echo i386-pc-qnx
-	exit 0 ;;
-    NSR-?:NONSTOP_KERNEL:*:*)
-	echo nsr-tandem-nsk${UNAME_RELEASE}
-	exit 0 ;;
-    *:NonStop-UX:*:*)
-	echo mips-compaq-nonstopux
-	exit 0 ;;
-    BS2000:POSIX*:*:*)
-	echo bs2000-siemens-sysv
-	exit 0 ;;
-    DS/*:UNIX_System_V:*:*)
-	echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
-	exit 0 ;;
-    *:Plan9:*:*)
-	# "uname -m" is not consistent, so use $cputype instead. 386
-	# is converted to i386 for consistency with other x86
-	# operating systems.
-	if test "$cputype" = "386"; then
-	    UNAME_MACHINE=i386
-	else
-	    UNAME_MACHINE="$cputype"
-	fi
-	echo ${UNAME_MACHINE}-unknown-plan9
-	exit 0 ;;
-    *:TOPS-10:*:*)
-	echo pdp10-unknown-tops10
-	exit 0 ;;
-    *:TENEX:*:*)
-	echo pdp10-unknown-tenex
-	exit 0 ;;
-    KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
-	echo pdp10-dec-tops20
-	exit 0 ;;
-    XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
-	echo pdp10-xkl-tops20
-	exit 0 ;;
-    *:TOPS-20:*:*)
-	echo pdp10-unknown-tops20
-	exit 0 ;;
-    *:ITS:*:*)
-	echo pdp10-unknown-its
-	exit 0 ;;
-    SEI:*:*:SEIUX)
-        echo mips-sei-seiux${UNAME_RELEASE}
-	exit 0 ;;
-    *:DRAGONFLY:*:*)
-	echo ${UNAME_MACHINE}-unknown-dragonfly${UNAME_RELEASE}
-	exit 0 ;;
-esac
-
-#echo '(No uname command or uname output not recognized.)' 1>&2
-#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
-
-eval $set_cc_for_build
-cat >$dummy.c <<EOF
-#ifdef _SEQUENT_
-# include <sys/types.h>
-# include <sys/utsname.h>
-#endif
-main ()
-{
-#if defined (sony)
-#if defined (MIPSEB)
-  /* BFD wants "bsd" instead of "newsos".  Perhaps BFD should be changed,
-     I don't know....  */
-  printf ("mips-sony-bsd\n"); exit (0);
-#else
-#include <sys/param.h>
-  printf ("m68k-sony-newsos%s\n",
-#ifdef NEWSOS4
-          "4"
-#else
-	  ""
-#endif
-         ); exit (0);
-#endif
-#endif
-
-#if defined (__arm) && defined (__acorn) && defined (__unix)
-  printf ("arm-acorn-riscix"); exit (0);
-#endif
-
-#if defined (hp300) && !defined (hpux)
-  printf ("m68k-hp-bsd\n"); exit (0);
-#endif
-
-#if defined (NeXT)
-#if !defined (__ARCHITECTURE__)
-#define __ARCHITECTURE__ "m68k"
-#endif
-  int version;
-  version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
-  if (version < 4)
-    printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
-  else
-    printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
-  exit (0);
-#endif
-
-#if defined (MULTIMAX) || defined (n16)
-#if defined (UMAXV)
-  printf ("ns32k-encore-sysv\n"); exit (0);
-#else
-#if defined (CMU)
-  printf ("ns32k-encore-mach\n"); exit (0);
-#else
-  printf ("ns32k-encore-bsd\n"); exit (0);
-#endif
-#endif
-#endif
-
-#if defined (__386BSD__)
-  printf ("i386-pc-bsd\n"); exit (0);
-#endif
-
-#if defined (sequent)
-#if defined (i386)
-  printf ("i386-sequent-dynix\n"); exit (0);
-#endif
-#if defined (ns32000)
-  printf ("ns32k-sequent-dynix\n"); exit (0);
-#endif
-#endif
-
-#if defined (_SEQUENT_)
-    struct utsname un;
-
-    uname(&un);
-
-    if (strncmp(un.version, "V2", 2) == 0) {
-	printf ("i386-sequent-ptx2\n"); exit (0);
-    }
-    if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
-	printf ("i386-sequent-ptx1\n"); exit (0);
-    }
-    printf ("i386-sequent-ptx\n"); exit (0);
-
-#endif
-
-#if defined (vax)
-# if !defined (ultrix)
-#  include <sys/param.h>
-#  if defined (BSD)
-#   if BSD == 43
-      printf ("vax-dec-bsd4.3\n"); exit (0);
-#   else
-#    if BSD == 199006
-      printf ("vax-dec-bsd4.3reno\n"); exit (0);
-#    else
-      printf ("vax-dec-bsd\n"); exit (0);
-#    endif
-#   endif
-#  else
-    printf ("vax-dec-bsd\n"); exit (0);
-#  endif
-# else
-    printf ("vax-dec-ultrix\n"); exit (0);
-# endif
-#endif
-
-#if defined (alliant) && defined (i860)
-  printf ("i860-alliant-bsd\n"); exit (0);
-#endif
-
-  exit (1);
-}
-EOF
-
-$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && $dummy && exit 0
-
-# Apollos put the system type in the environment.
-
-test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; }
-
-# Convex versions that predate uname can use getsysinfo(1)
-
-if [ -x /usr/convex/getsysinfo ]
-then
-    case `getsysinfo -f cpu_type` in
-    c1*)
-	echo c1-convex-bsd
-	exit 0 ;;
-    c2*)
-	if getsysinfo -f scalar_acc
-	then echo c32-convex-bsd
-	else echo c2-convex-bsd
-	fi
-	exit 0 ;;
-    c34*)
-	echo c34-convex-bsd
-	exit 0 ;;
-    c38*)
-	echo c38-convex-bsd
-	exit 0 ;;
-    c4*)
-	echo c4-convex-bsd
-	exit 0 ;;
-    esac
-fi
-
-cat >&2 <<EOF
-$0: unable to guess system type
-
-This script, last modified $timestamp, has failed to recognize
-the operating system you are using. It is advised that you
-download the most up to date version of the config scripts from
-
-    ftp://ftp.gnu.org/pub/gnu/config/
-
-If the version you run ($0) is already up to date, please
-send the following data and any information you think might be
-pertinent to <config-patches@gnu.org> in order to provide the needed
-information to handle your system.
-
-config.guess timestamp = $timestamp
-
-uname -m = `(uname -m) 2>/dev/null || echo unknown`
-uname -r = `(uname -r) 2>/dev/null || echo unknown`
-uname -s = `(uname -s) 2>/dev/null || echo unknown`
-uname -v = `(uname -v) 2>/dev/null || echo unknown`
-
-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
-/bin/uname -X     = `(/bin/uname -X) 2>/dev/null`
-
-hostinfo               = `(hostinfo) 2>/dev/null`
-/bin/universe          = `(/bin/universe) 2>/dev/null`
-/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null`
-/bin/arch              = `(/bin/arch) 2>/dev/null`
-/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null`
-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
-
-UNAME_MACHINE = ${UNAME_MACHINE}
-UNAME_RELEASE = ${UNAME_RELEASE}
-UNAME_SYSTEM  = ${UNAME_SYSTEM}
-UNAME_VERSION = ${UNAME_VERSION}
-EOF
-
-exit 1
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "timestamp='"
-# time-stamp-format: "%:y-%02m-%02d"
-# time-stamp-end: "'"
-# End:
diff --git a/main/libresample/config.sub b/main/libresample/config.sub
deleted file mode 100755
index 463186dbf..000000000
--- a/main/libresample/config.sub
+++ /dev/null
@@ -1,1537 +0,0 @@
-#! /bin/sh
-# Configuration validation subroutine script.
-#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003 Free Software Foundation, Inc.
-
-timestamp='2004-01-05'
-
-# This file is (in principle) common to ALL GNU software.
-# The presence of a machine in this file suggests that SOME GNU software
-# can handle that machine.  It does not imply ALL GNU software can.
-#
-# This file is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330,
-# Boston, MA 02111-1307, USA.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Please send patches to <config-patches@gnu.org>.  Submit a context
-# diff and a properly formatted ChangeLog entry.
-#
-# Configuration subroutine to validate and canonicalize a configuration type.
-# Supply the specified configuration type as an argument.
-# If it is invalid, we print an error message on stderr and exit with code 1.
-# Otherwise, we print the canonical config type on stdout and succeed.
-
-# This file is supposed to be the same for all GNU packages
-# and recognize all the CPU types, system types and aliases
-# that are meaningful with *any* GNU software.
-# Each package is responsible for reporting which valid configurations
-# it does not support.  The user should be able to distinguish
-# a failure to support a valid configuration from a meaningless
-# configuration.
-
-# The goal of this file is to map all the various variations of a given
-# machine specification into a single specification in the form:
-#	CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
-# or in some cases, the newer four-part form:
-#	CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
-# It is wrong to echo any other type of specification.
-
-me=`echo "$0" | sed -e 's,.*/,,'`
-
-usage="\
-Usage: $0 [OPTION] CPU-MFR-OPSYS
-       $0 [OPTION] ALIAS
-
-Canonicalize a configuration name.
-
-Operation modes:
-  -h, --help         print this help, then exit
-  -t, --time-stamp   print date of last modification, then exit
-  -v, --version      print version number, then exit
-
-Report bugs and patches to <config-patches@gnu.org>."
-
-version="\
-GNU config.sub ($timestamp)
-
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
-Free Software Foundation, Inc.
-
-This is free software; see the source for copying conditions.  There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-
-help="
-Try \`$me --help' for more information."
-
-# Parse command line
-while test $# -gt 0 ; do
-  case $1 in
-    --time-stamp | --time* | -t )
-       echo "$timestamp" ; exit 0 ;;
-    --version | -v )
-       echo "$version" ; exit 0 ;;
-    --help | --h* | -h )
-       echo "$usage"; exit 0 ;;
-    -- )     # Stop option processing
-       shift; break ;;
-    - )	# Use stdin as input.
-       break ;;
-    -* )
-       echo "$me: invalid option $1$help"
-       exit 1 ;;
-
-    *local*)
-       # First pass through any local machine types.
-       echo $1
-       exit 0;;
-
-    * )
-       break ;;
-  esac
-done
-
-case $# in
- 0) echo "$me: missing argument$help" >&2
-    exit 1;;
- 1) ;;
- *) echo "$me: too many arguments$help" >&2
-    exit 1;;
-esac
-
-# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
-# Here we must recognize all the valid KERNEL-OS combinations.
-maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
-case $maybe_os in
-  nto-qnx* | linux-gnu* | linux-dietlibc | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | \
-  kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*)
-    os=-$maybe_os
-    basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
-    ;;
-  *)
-    basic_machine=`echo $1 | sed 's/-[^-]*$//'`
-    if [ $basic_machine != $1 ]
-    then os=`echo $1 | sed 's/.*-/-/'`
-    else os=; fi
-    ;;
-esac
-
-### Let's recognize common machines as not being operating systems so
-### that things like config.sub decstation-3100 work.  We also
-### recognize some manufacturers as not being operating systems, so we
-### can provide default operating systems below.
-case $os in
-	-sun*os*)
-		# Prevent following clause from handling this invalid input.
-		;;
-	-dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
-	-att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
-	-unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
-	-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
-	-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
-	-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
-	-apple | -axis)
-		os=
-		basic_machine=$1
-		;;
-	-sim | -cisco | -oki | -wec | -winbond)
-		os=
-		basic_machine=$1
-		;;
-	-scout)
-		;;
-	-wrs)
-		os=-vxworks
-		basic_machine=$1
-		;;
-	-chorusos*)
-		os=-chorusos
-		basic_machine=$1
-		;;
- 	-chorusrdb)
- 		os=-chorusrdb
-		basic_machine=$1
- 		;;
-	-hiux*)
-		os=-hiuxwe2
-		;;
-	-sco5)
-		os=-sco3.2v5
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-sco4)
-		os=-sco3.2v4
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-sco3.2.[4-9]*)
-		os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-sco3.2v[4-9]*)
-		# Don't forget version if it is 3.2v4 or newer.
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-sco*)
-		os=-sco3.2v2
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-udk*)
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-isc)
-		os=-isc2.2
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-clix*)
-		basic_machine=clipper-intergraph
-		;;
-	-isc*)
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-lynx*)
-		os=-lynxos
-		;;
-	-ptx*)
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
-		;;
-	-windowsnt*)
-		os=`echo $os | sed -e 's/windowsnt/winnt/'`
-		;;
-	-psos*)
-		os=-psos
-		;;
-	-mint | -mint[0-9]*)
-		basic_machine=m68k-atari
-		os=-mint
-		;;
-esac
-
-# Decode aliases for certain CPU-COMPANY combinations.
-case $basic_machine in
-	# Recognize the basic CPU types without company name.
-	# Some are omitted here because they have special meanings below.
-	1750a | 580 \
-	| a29k \
-	| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
-	| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
-	| am33_2.0 \
-	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \
-	| c4x | clipper \
-	| d10v | d30v | dlx | dsp16xx \
-	| fr30 | frv \
-	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
-	| i370 | i860 | i960 | ia64 \
-	| ip2k | iq2000 \
-	| m32r | m68000 | m68k | m88k | mcore \
-	| mips | mipsbe | mipseb | mipsel | mipsle \
-	| mips16 \
-	| mips64 | mips64el \
-	| mips64vr | mips64vrel \
-	| mips64orion | mips64orionel \
-	| mips64vr4100 | mips64vr4100el \
-	| mips64vr4300 | mips64vr4300el \
-	| mips64vr5000 | mips64vr5000el \
-	| mipsisa32 | mipsisa32el \
-	| mipsisa32r2 | mipsisa32r2el \
-	| mipsisa64 | mipsisa64el \
-	| mipsisa64r2 | mipsisa64r2el \
-	| mipsisa64sb1 | mipsisa64sb1el \
-	| mipsisa64sr71k | mipsisa64sr71kel \
-	| mipstx39 | mipstx39el \
-	| mn10200 | mn10300 \
-	| msp430 \
-	| ns16k | ns32k \
-	| openrisc | or32 \
-	| pdp10 | pdp11 | pj | pjl \
-	| powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
-	| pyramid \
-	| sh | sh[1234] | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \
-	| sh64 | sh64le \
-	| sparc | sparc64 | sparc86x | sparclet | sparclite | sparcv9 | sparcv9b \
-	| strongarm \
-	| tahoe | thumb | tic4x | tic80 | tron \
-	| v850 | v850e \
-	| we32k \
-	| x86 | xscale | xstormy16 | xtensa \
-	| z8k)
-		basic_machine=$basic_machine-unknown
-		;;
-	m6811 | m68hc11 | m6812 | m68hc12)
-		# Motorola 68HC11/12.
-		basic_machine=$basic_machine-unknown
-		os=-none
-		;;
-	m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
-		;;
-
-	# We use `pc' rather than `unknown'
-	# because (1) that's what they normally are, and
-	# (2) the word "unknown" tends to confuse beginning users.
-	i*86 | x86_64)
-	  basic_machine=$basic_machine-pc
-	  ;;
-	# Object if more than one company name word.
-	*-*-*)
-		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
-		exit 1
-		;;
-	# Recognize the basic CPU types with company name.
-	580-* \
-	| a29k-* \
-	| alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
-	| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
-	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
-	| arm-*  | armbe-* | armle-* | armeb-* | armv*-* \
-	| avr-* \
-	| bs2000-* \
-	| c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
-	| clipper-* | cydra-* \
-	| d10v-* | d30v-* | dlx-* \
-	| elxsi-* \
-	| f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \
-	| h8300-* | h8500-* \
-	| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
-	| i*86-* | i860-* | i960-* | ia64-* \
-	| ip2k-* | iq2000-* \
-	| m32r-* \
-	| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
-	| m88110-* | m88k-* | mcore-* \
-	| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
-	| mips16-* \
-	| mips64-* | mips64el-* \
-	| mips64vr-* | mips64vrel-* \
-	| mips64orion-* | mips64orionel-* \
-	| mips64vr4100-* | mips64vr4100el-* \
-	| mips64vr4300-* | mips64vr4300el-* \
-	| mips64vr5000-* | mips64vr5000el-* \
-	| mipsisa32-* | mipsisa32el-* \
-	| mipsisa32r2-* | mipsisa32r2el-* \
-	| mipsisa64-* | mipsisa64el-* \
-	| mipsisa64r2-* | mipsisa64r2el-* \
-	| mipsisa64sb1-* | mipsisa64sb1el-* \
-	| mipsisa64sr71k-* | mipsisa64sr71kel-* \
-	| mipstx39-* | mipstx39el-* \
-	| msp430-* \
-	| none-* | np1-* | nv1-* | ns16k-* | ns32k-* \
-	| orion-* \
-	| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
-	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
-	| pyramid-* \
-	| romp-* | rs6000-* \
-	| sh-* | sh[1234]-* | sh[23]e-* | sh[34]eb-* | shbe-* \
-	| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
-	| sparc-* | sparc64-* | sparc86x-* | sparclet-* | sparclite-* \
-	| sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \
-	| tahoe-* | thumb-* \
-	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
-	| tron-* \
-	| v850-* | v850e-* | vax-* \
-	| we32k-* \
-	| x86-* | x86_64-* | xps100-* | xscale-* | xstormy16-* \
-	| xtensa-* \
-	| ymp-* \
-	| z8k-*)
-		;;
-	# Recognize the various machine names and aliases which stand
-	# for a CPU type and a company and sometimes even an OS.
-	386bsd)
-		basic_machine=i386-unknown
-		os=-bsd
-		;;
-	3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
-		basic_machine=m68000-att
-		;;
-	3b*)
-		basic_machine=we32k-att
-		;;
-	a29khif)
-		basic_machine=a29k-amd
-		os=-udi
-		;;
-	adobe68k)
-		basic_machine=m68010-adobe
-		os=-scout
-		;;
-	alliant | fx80)
-		basic_machine=fx80-alliant
-		;;
-	altos | altos3068)
-		basic_machine=m68k-altos
-		;;
-	am29k)
-		basic_machine=a29k-none
-		os=-bsd
-		;;
-	amd64)
-		basic_machine=x86_64-pc
-		;;
-	amd64-*)
-		basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	amdahl)
-		basic_machine=580-amdahl
-		os=-sysv
-		;;
-	amiga | amiga-*)
-		basic_machine=m68k-unknown
-		;;
-	amigaos | amigados)
-		basic_machine=m68k-unknown
-		os=-amigaos
-		;;
-	amigaunix | amix)
-		basic_machine=m68k-unknown
-		os=-sysv4
-		;;
-	apollo68)
-		basic_machine=m68k-apollo
-		os=-sysv
-		;;
-	apollo68bsd)
-		basic_machine=m68k-apollo
-		os=-bsd
-		;;
-	aux)
-		basic_machine=m68k-apple
-		os=-aux
-		;;
-	balance)
-		basic_machine=ns32k-sequent
-		os=-dynix
-		;;
-	c90)
-		basic_machine=c90-cray
-		os=-unicos
-		;;
-	convex-c1)
-		basic_machine=c1-convex
-		os=-bsd
-		;;
-	convex-c2)
-		basic_machine=c2-convex
-		os=-bsd
-		;;
-	convex-c32)
-		basic_machine=c32-convex
-		os=-bsd
-		;;
-	convex-c34)
-		basic_machine=c34-convex
-		os=-bsd
-		;;
-	convex-c38)
-		basic_machine=c38-convex
-		os=-bsd
-		;;
-	cray | j90)
-		basic_machine=j90-cray
-		os=-unicos
-		;;
-	crds | unos)
-		basic_machine=m68k-crds
-		;;
-	cris | cris-* | etrax*)
-		basic_machine=cris-axis
-		;;
-	da30 | da30-*)
-		basic_machine=m68k-da30
-		;;
-	decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
-		basic_machine=mips-dec
-		;;
-	decsystem10* | dec10*)
-		basic_machine=pdp10-dec
-		os=-tops10
-		;;
-	decsystem20* | dec20*)
-		basic_machine=pdp10-dec
-		os=-tops20
-		;;
-	delta | 3300 | motorola-3300 | motorola-delta \
-	      | 3300-motorola | delta-motorola)
-		basic_machine=m68k-motorola
-		;;
-	delta88)
-		basic_machine=m88k-motorola
-		os=-sysv3
-		;;
-	dpx20 | dpx20-*)
-		basic_machine=rs6000-bull
-		os=-bosx
-		;;
-	dpx2* | dpx2*-bull)
-		basic_machine=m68k-bull
-		os=-sysv3
-		;;
-	ebmon29k)
-		basic_machine=a29k-amd
-		os=-ebmon
-		;;
-	elxsi)
-		basic_machine=elxsi-elxsi
-		os=-bsd
-		;;
-	encore | umax | mmax)
-		basic_machine=ns32k-encore
-		;;
-	es1800 | OSE68k | ose68k | ose | OSE)
-		basic_machine=m68k-ericsson
-		os=-ose
-		;;
-	fx2800)
-		basic_machine=i860-alliant
-		;;
-	genix)
-		basic_machine=ns32k-ns
-		;;
-	gmicro)
-		basic_machine=tron-gmicro
-		os=-sysv
-		;;
-	go32)
-		basic_machine=i386-pc
-		os=-go32
-		;;
-	h3050r* | hiux*)
-		basic_machine=hppa1.1-hitachi
-		os=-hiuxwe2
-		;;
-	h8300hms)
-		basic_machine=h8300-hitachi
-		os=-hms
-		;;
-	h8300xray)
-		basic_machine=h8300-hitachi
-		os=-xray
-		;;
-	h8500hms)
-		basic_machine=h8500-hitachi
-		os=-hms
-		;;
-	harris)
-		basic_machine=m88k-harris
-		os=-sysv3
-		;;
-	hp300-*)
-		basic_machine=m68k-hp
-		;;
-	hp300bsd)
-		basic_machine=m68k-hp
-		os=-bsd
-		;;
-	hp300hpux)
-		basic_machine=m68k-hp
-		os=-hpux
-		;;
-	hp3k9[0-9][0-9] | hp9[0-9][0-9])
-		basic_machine=hppa1.0-hp
-		;;
-	hp9k2[0-9][0-9] | hp9k31[0-9])
-		basic_machine=m68000-hp
-		;;
-	hp9k3[2-9][0-9])
-		basic_machine=m68k-hp
-		;;
-	hp9k6[0-9][0-9] | hp6[0-9][0-9])
-		basic_machine=hppa1.0-hp
-		;;
-	hp9k7[0-79][0-9] | hp7[0-79][0-9])
-		basic_machine=hppa1.1-hp
-		;;
-	hp9k78[0-9] | hp78[0-9])
-		# FIXME: really hppa2.0-hp
-		basic_machine=hppa1.1-hp
-		;;
-	hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
-		# FIXME: really hppa2.0-hp
-		basic_machine=hppa1.1-hp
-		;;
-	hp9k8[0-9][13679] | hp8[0-9][13679])
-		basic_machine=hppa1.1-hp
-		;;
-	hp9k8[0-9][0-9] | hp8[0-9][0-9])
-		basic_machine=hppa1.0-hp
-		;;
-	hppa-next)
-		os=-nextstep3
-		;;
-	hppaosf)
-		basic_machine=hppa1.1-hp
-		os=-osf
-		;;
-	hppro)
-		basic_machine=hppa1.1-hp
-		os=-proelf
-		;;
-	i370-ibm* | ibm*)
-		basic_machine=i370-ibm
-		;;
-# I'm not sure what "Sysv32" means.  Should this be sysv3.2?
-	i*86v32)
-		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
-		os=-sysv32
-		;;
-	i*86v4*)
-		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
-		os=-sysv4
-		;;
-	i*86v)
-		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
-		os=-sysv
-		;;
-	i*86sol2)
-		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
-		os=-solaris2
-		;;
-	i386mach)
-		basic_machine=i386-mach
-		os=-mach
-		;;
-	i386-vsta | vsta)
-		basic_machine=i386-unknown
-		os=-vsta
-		;;
-	iris | iris4d)
-		basic_machine=mips-sgi
-		case $os in
-		    -irix*)
-			;;
-		    *)
-			os=-irix4
-			;;
-		esac
-		;;
-	isi68 | isi)
-		basic_machine=m68k-isi
-		os=-sysv
-		;;
-	m88k-omron*)
-		basic_machine=m88k-omron
-		;;
-	magnum | m3230)
-		basic_machine=mips-mips
-		os=-sysv
-		;;
-	merlin)
-		basic_machine=ns32k-utek
-		os=-sysv
-		;;
-	mingw32)
-		basic_machine=i386-pc
-		os=-mingw32
-		;;
-	miniframe)
-		basic_machine=m68000-convergent
-		;;
-	*mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
-		basic_machine=m68k-atari
-		os=-mint
-		;;
-	mips3*-*)
-		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
-		;;
-	mips3*)
-		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
-		;;
-	mmix*)
-		basic_machine=mmix-knuth
-		os=-mmixware
-		;;
-	monitor)
-		basic_machine=m68k-rom68k
-		os=-coff
-		;;
-	morphos)
-		basic_machine=powerpc-unknown
-		os=-morphos
-		;;
-	msdos)
-		basic_machine=i386-pc
-		os=-msdos
-		;;
-	mvs)
-		basic_machine=i370-ibm
-		os=-mvs
-		;;
-	ncr3000)
-		basic_machine=i486-ncr
-		os=-sysv4
-		;;
-	netbsd386)
-		basic_machine=i386-unknown
-		os=-netbsd
-		;;
-	netwinder)
-		basic_machine=armv4l-rebel
-		os=-linux
-		;;
-	news | news700 | news800 | news900)
-		basic_machine=m68k-sony
-		os=-newsos
-		;;
-	news1000)
-		basic_machine=m68030-sony
-		os=-newsos
-		;;
-	news-3600 | risc-news)
-		basic_machine=mips-sony
-		os=-newsos
-		;;
-	necv70)
-		basic_machine=v70-nec
-		os=-sysv
-		;;
-	next | m*-next )
-		basic_machine=m68k-next
-		case $os in
-		    -nextstep* )
-			;;
-		    -ns2*)
-		      os=-nextstep2
-			;;
-		    *)
-		      os=-nextstep3
-			;;
-		esac
-		;;
-	nh3000)
-		basic_machine=m68k-harris
-		os=-cxux
-		;;
-	nh[45]000)
-		basic_machine=m88k-harris
-		os=-cxux
-		;;
-	nindy960)
-		basic_machine=i960-intel
-		os=-nindy
-		;;
-	mon960)
-		basic_machine=i960-intel
-		os=-mon960
-		;;
-	nonstopux)
-		basic_machine=mips-compaq
-		os=-nonstopux
-		;;
-	np1)
-		basic_machine=np1-gould
-		;;
-	nv1)
-		basic_machine=nv1-cray
-		os=-unicosmp
-		;;
-	nsr-tandem)
-		basic_machine=nsr-tandem
-		;;
-	op50n-* | op60c-*)
-		basic_machine=hppa1.1-oki
-		os=-proelf
-		;;
-	or32 | or32-*)
-		basic_machine=or32-unknown
-		os=-coff
-		;;
-	os400)
-		basic_machine=powerpc-ibm
-		os=-os400
-		;;
-	OSE68000 | ose68000)
-		basic_machine=m68000-ericsson
-		os=-ose
-		;;
-	os68k)
-		basic_machine=m68k-none
-		os=-os68k
-		;;
-	pa-hitachi)
-		basic_machine=hppa1.1-hitachi
-		os=-hiuxwe2
-		;;
-	paragon)
-		basic_machine=i860-intel
-		os=-osf
-		;;
-	pbd)
-		basic_machine=sparc-tti
-		;;
-	pbb)
-		basic_machine=m68k-tti
-		;;
-	pc532 | pc532-*)
-		basic_machine=ns32k-pc532
-		;;
-	pentium | p5 | k5 | k6 | nexgen | viac3)
-		basic_machine=i586-pc
-		;;
-	pentiumpro | p6 | 6x86 | athlon | athlon_*)
-		basic_machine=i686-pc
-		;;
-	pentiumii | pentium2 | pentiumiii | pentium3)
-		basic_machine=i686-pc
-		;;
-	pentium4)
-		basic_machine=i786-pc
-		;;
-	pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
-		basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	pentiumpro-* | p6-* | 6x86-* | athlon-*)
-		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
-		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	pentium4-*)
-		basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	pn)
-		basic_machine=pn-gould
-		;;
-	power)	basic_machine=power-ibm
-		;;
-	ppc)	basic_machine=powerpc-unknown
-		;;
-	ppc-*)	basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	ppcle | powerpclittle | ppc-le | powerpc-little)
-		basic_machine=powerpcle-unknown
-		;;
-	ppcle-* | powerpclittle-*)
-		basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	ppc64)	basic_machine=powerpc64-unknown
-		;;
-	ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	ppc64le | powerpc64little | ppc64-le | powerpc64-little)
-		basic_machine=powerpc64le-unknown
-		;;
-	ppc64le-* | powerpc64little-*)
-		basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	ps2)
-		basic_machine=i386-ibm
-		;;
-	pw32)
-		basic_machine=i586-unknown
-		os=-pw32
-		;;
-	rom68k)
-		basic_machine=m68k-rom68k
-		os=-coff
-		;;
-	rm[46]00)
-		basic_machine=mips-siemens
-		;;
-	rtpc | rtpc-*)
-		basic_machine=romp-ibm
-		;;
-	s390 | s390-*)
-		basic_machine=s390-ibm
-		;;
-	s390x | s390x-*)
-		basic_machine=s390x-ibm
-		;;
-	sa29200)
-		basic_machine=a29k-amd
-		os=-udi
-		;;
-	sb1)
-		basic_machine=mipsisa64sb1-unknown
-		;;
-	sb1el)
-		basic_machine=mipsisa64sb1el-unknown
-		;;
-	sei)
-		basic_machine=mips-sei
-		os=-seiux
-		;;
-	sequent)
-		basic_machine=i386-sequent
-		;;
-	sh)
-		basic_machine=sh-hitachi
-		os=-hms
-		;;
-	sh64)
-		basic_machine=sh64-unknown
-		;;
-	sparclite-wrs | simso-wrs)
-		basic_machine=sparclite-wrs
-		os=-vxworks
-		;;
-	sps7)
-		basic_machine=m68k-bull
-		os=-sysv2
-		;;
-	spur)
-		basic_machine=spur-unknown
-		;;
-	st2000)
-		basic_machine=m68k-tandem
-		;;
-	stratus)
-		basic_machine=i860-stratus
-		os=-sysv4
-		;;
-	sun2)
-		basic_machine=m68000-sun
-		;;
-	sun2os3)
-		basic_machine=m68000-sun
-		os=-sunos3
-		;;
-	sun2os4)
-		basic_machine=m68000-sun
-		os=-sunos4
-		;;
-	sun3os3)
-		basic_machine=m68k-sun
-		os=-sunos3
-		;;
-	sun3os4)
-		basic_machine=m68k-sun
-		os=-sunos4
-		;;
-	sun4os3)
-		basic_machine=sparc-sun
-		os=-sunos3
-		;;
-	sun4os4)
-		basic_machine=sparc-sun
-		os=-sunos4
-		;;
-	sun4sol2)
-		basic_machine=sparc-sun
-		os=-solaris2
-		;;
-	sun3 | sun3-*)
-		basic_machine=m68k-sun
-		;;
-	sun4)
-		basic_machine=sparc-sun
-		;;
-	sun386 | sun386i | roadrunner)
-		basic_machine=i386-sun
-		;;
-	sv1)
-		basic_machine=sv1-cray
-		os=-unicos
-		;;
-	symmetry)
-		basic_machine=i386-sequent
-		os=-dynix
-		;;
-	t3e)
-		basic_machine=alphaev5-cray
-		os=-unicos
-		;;
-	t90)
-		basic_machine=t90-cray
-		os=-unicos
-		;;
-	tic54x | c54x*)
-		basic_machine=tic54x-unknown
-		os=-coff
-		;;
-	tic55x | c55x*)
-		basic_machine=tic55x-unknown
-		os=-coff
-		;;
-	tic6x | c6x*)
-		basic_machine=tic6x-unknown
-		os=-coff
-		;;
-	tx39)
-		basic_machine=mipstx39-unknown
-		;;
-	tx39el)
-		basic_machine=mipstx39el-unknown
-		;;
-	toad1)
-		basic_machine=pdp10-xkl
-		os=-tops20
-		;;
-	tower | tower-32)
-		basic_machine=m68k-ncr
-		;;
-	tpf)
-		basic_machine=s390x-ibm
-		os=-tpf
-		;;
-	udi29k)
-		basic_machine=a29k-amd
-		os=-udi
-		;;
-	ultra3)
-		basic_machine=a29k-nyu
-		os=-sym1
-		;;
-	v810 | necv810)
-		basic_machine=v810-nec
-		os=-none
-		;;
-	vaxv)
-		basic_machine=vax-dec
-		os=-sysv
-		;;
-	vms)
-		basic_machine=vax-dec
-		os=-vms
-		;;
-	vpp*|vx|vx-*)
-		basic_machine=f301-fujitsu
-		;;
-	vxworks960)
-		basic_machine=i960-wrs
-		os=-vxworks
-		;;
-	vxworks68)
-		basic_machine=m68k-wrs
-		os=-vxworks
-		;;
-	vxworks29k)
-		basic_machine=a29k-wrs
-		os=-vxworks
-		;;
-	w65*)
-		basic_machine=w65-wdc
-		os=-none
-		;;
-	w89k-*)
-		basic_machine=hppa1.1-winbond
-		os=-proelf
-		;;
-	xps | xps100)
-		basic_machine=xps100-honeywell
-		;;
-	ymp)
-		basic_machine=ymp-cray
-		os=-unicos
-		;;
-	z8k-*-coff)
-		basic_machine=z8k-unknown
-		os=-sim
-		;;
-	none)
-		basic_machine=none-none
-		os=-none
-		;;
-
-# Here we handle the default manufacturer of certain CPU types.  It is in
-# some cases the only manufacturer, in others, it is the most popular.
-	w89k)
-		basic_machine=hppa1.1-winbond
-		;;
-	op50n)
-		basic_machine=hppa1.1-oki
-		;;
-	op60c)
-		basic_machine=hppa1.1-oki
-		;;
-	romp)
-		basic_machine=romp-ibm
-		;;
-	rs6000)
-		basic_machine=rs6000-ibm
-		;;
-	vax)
-		basic_machine=vax-dec
-		;;
-	pdp10)
-		# there are many clones, so DEC is not a safe bet
-		basic_machine=pdp10-unknown
-		;;
-	pdp11)
-		basic_machine=pdp11-dec
-		;;
-	we32k)
-		basic_machine=we32k-att
-		;;
-	sh3 | sh4 | sh[34]eb | sh[1234]le | sh[23]ele)
-		basic_machine=sh-unknown
-		;;
-	sh64)
-		basic_machine=sh64-unknown
-		;;
-	sparc | sparcv9 | sparcv9b)
-		basic_machine=sparc-sun
-		;;
-	cydra)
-		basic_machine=cydra-cydrome
-		;;
-	orion)
-		basic_machine=orion-highlevel
-		;;
-	orion105)
-		basic_machine=clipper-highlevel
-		;;
-	mac | mpw | mac-mpw)
-		basic_machine=m68k-apple
-		;;
-	pmac | pmac-mpw)
-		basic_machine=powerpc-apple
-		;;
-	*-unknown)
-		# Make sure to match an already-canonicalized machine name.
-		;;
-	*)
-		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
-		exit 1
-		;;
-esac
-
-# Here we canonicalize certain aliases for manufacturers.
-case $basic_machine in
-	*-digital*)
-		basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
-		;;
-	*-commodore*)
-		basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
-		;;
-	*)
-		;;
-esac
-
-# Decode manufacturer-specific aliases for certain operating systems.
-
-if [ x"$os" != x"" ]
-then
-case $os in
-        # First match some system type aliases
-        # that might get confused with valid system types.
-	# -solaris* is a basic system type, with this one exception.
-	-solaris1 | -solaris1.*)
-		os=`echo $os | sed -e 's|solaris1|sunos4|'`
-		;;
-	-solaris)
-		os=-solaris2
-		;;
-	-svr4*)
-		os=-sysv4
-		;;
-	-unixware*)
-		os=-sysv4.2uw
-		;;
-	-gnu/linux*)
-		os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
-		;;
-	# First accept the basic system types.
-	# The portable systems comes first.
-	# Each alternative MUST END IN A *, to match a version number.
-	# -sysv* is not here because it comes later, after sysvr4.
-	-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
-	      | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\
-	      | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \
-	      | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
-	      | -aos* \
-	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
-	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
-	      | -hiux* | -386bsd* | -knetbsd* | -netbsd* | -openbsd* | -kfreebsd* | -freebsd* | -riscix* \
-	      | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
-	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
-	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
-	      | -chorusos* | -chorusrdb* \
-	      | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
-	      | -mingw32* | -linux-gnu* | -linux-uclibc* | -uxpv* | -beos* | -mpeix* | -udk* \
-	      | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
-	      | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
-	      | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
-	      | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
-	      | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
-	      | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly*)
-	# Remember, each alternative MUST END IN *, to match a version number.
-		;;
-	-qnx*)
-		case $basic_machine in
-		    x86-* | i*86-*)
-			;;
-		    *)
-			os=-nto$os
-			;;
-		esac
-		;;
-	-nto-qnx*)
-		;;
-	-nto*)
-		os=`echo $os | sed -e 's|nto|nto-qnx|'`
-		;;
-	-sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
-	      | -windows* | -osx | -abug | -netware* | -os9* | -beos* \
-	      | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
-		;;
-	-mac*)
-		os=`echo $os | sed -e 's|mac|macos|'`
-		;;
-	-linux-dietlibc)
-		os=-linux-dietlibc
-		;;
-	-linux*)
-		os=`echo $os | sed -e 's|linux|linux-gnu|'`
-		;;
-	-sunos5*)
-		os=`echo $os | sed -e 's|sunos5|solaris2|'`
-		;;
-	-sunos6*)
-		os=`echo $os | sed -e 's|sunos6|solaris3|'`
-		;;
-	-opened*)
-		os=-openedition
-		;;
-        -os400*)
-		os=-os400
-		;;
-	-wince*)
-		os=-wince
-		;;
-	-osfrose*)
-		os=-osfrose
-		;;
-	-osf*)
-		os=-osf
-		;;
-	-utek*)
-		os=-bsd
-		;;
-	-dynix*)
-		os=-bsd
-		;;
-	-acis*)
-		os=-aos
-		;;
-	-atheos*)
-		os=-atheos
-		;;
-	-syllable*)
-		os=-syllable
-		;;
-	-386bsd)
-		os=-bsd
-		;;
-	-ctix* | -uts*)
-		os=-sysv
-		;;
-	-nova*)
-		os=-rtmk-nova
-		;;
-	-ns2 )
-		os=-nextstep2
-		;;
-	-nsk*)
-		os=-nsk
-		;;
-	# Preserve the version number of sinix5.
-	-sinix5.*)
-		os=`echo $os | sed -e 's|sinix|sysv|'`
-		;;
-	-sinix*)
-		os=-sysv4
-		;;
-        -tpf*)
-		os=-tpf
-		;;
-	-triton*)
-		os=-sysv3
-		;;
-	-oss*)
-		os=-sysv3
-		;;
-	-svr4)
-		os=-sysv4
-		;;
-	-svr3)
-		os=-sysv3
-		;;
-	-sysvr4)
-		os=-sysv4
-		;;
-	# This must come after -sysvr4.
-	-sysv*)
-		;;
-	-ose*)
-		os=-ose
-		;;
-	-es1800*)
-		os=-ose
-		;;
-	-xenix)
-		os=-xenix
-		;;
-	-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
-		os=-mint
-		;;
-	-aros*)
-		os=-aros
-		;;
-	-kaos*)
-		os=-kaos
-		;;
-	-none)
-		;;
-	*)
-		# Get rid of the `-' at the beginning of $os.
-		os=`echo $os | sed 's/[^-]*-//'`
-		echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
-		exit 1
-		;;
-esac
-else
-
-# Here we handle the default operating systems that come with various machines.
-# The value should be what the vendor currently ships out the door with their
-# machine or put another way, the most popular os provided with the machine.
-
-# Note that if you're going to try to match "-MANUFACTURER" here (say,
-# "-sun"), then you have to tell the case statement up towards the top
-# that MANUFACTURER isn't an operating system.  Otherwise, code above
-# will signal an error saying that MANUFACTURER isn't an operating
-# system, and we'll never get to this point.
-
-case $basic_machine in
-	*-acorn)
-		os=-riscix1.2
-		;;
-	arm*-rebel)
-		os=-linux
-		;;
-	arm*-semi)
-		os=-aout
-		;;
-    c4x-* | tic4x-*)
-        os=-coff
-        ;;
-	# This must come before the *-dec entry.
-	pdp10-*)
-		os=-tops20
-		;;
-	pdp11-*)
-		os=-none
-		;;
-	*-dec | vax-*)
-		os=-ultrix4.2
-		;;
-	m68*-apollo)
-		os=-domain
-		;;
-	i386-sun)
-		os=-sunos4.0.2
-		;;
-	m68000-sun)
-		os=-sunos3
-		# This also exists in the configure program, but was not the
-		# default.
-		# os=-sunos4
-		;;
-	m68*-cisco)
-		os=-aout
-		;;
-	mips*-cisco)
-		os=-elf
-		;;
-	mips*-*)
-		os=-elf
-		;;
-	or32-*)
-		os=-coff
-		;;
-	*-tti)	# must be before sparc entry or we get the wrong os.
-		os=-sysv3
-		;;
-	sparc-* | *-sun)
-		os=-sunos4.1.1
-		;;
-	*-be)
-		os=-beos
-		;;
-	*-ibm)
-		os=-aix
-		;;
-	*-wec)
-		os=-proelf
-		;;
-	*-winbond)
-		os=-proelf
-		;;
-	*-oki)
-		os=-proelf
-		;;
-	*-hp)
-		os=-hpux
-		;;
-	*-hitachi)
-		os=-hiux
-		;;
-	i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
-		os=-sysv
-		;;
-	*-cbm)
-		os=-amigaos
-		;;
-	*-dg)
-		os=-dgux
-		;;
-	*-dolphin)
-		os=-sysv3
-		;;
-	m68k-ccur)
-		os=-rtu
-		;;
-	m88k-omron*)
-		os=-luna
-		;;
-	*-next )
-		os=-nextstep
-		;;
-	*-sequent)
-		os=-ptx
-		;;
-	*-crds)
-		os=-unos
-		;;
-	*-ns)
-		os=-genix
-		;;
-	i370-*)
-		os=-mvs
-		;;
-	*-next)
-		os=-nextstep3
-		;;
-	*-gould)
-		os=-sysv
-		;;
-	*-highlevel)
-		os=-bsd
-		;;
-	*-encore)
-		os=-bsd
-		;;
-	*-sgi)
-		os=-irix
-		;;
-	*-siemens)
-		os=-sysv4
-		;;
-	*-masscomp)
-		os=-rtu
-		;;
-	f30[01]-fujitsu | f700-fujitsu)
-		os=-uxpv
-		;;
-	*-rom68k)
-		os=-coff
-		;;
-	*-*bug)
-		os=-coff
-		;;
-	*-apple)
-		os=-macos
-		;;
-	*-atari*)
-		os=-mint
-		;;
-	*)
-		os=-none
-		;;
-esac
-fi
-
-# Here we handle the case where we know the os, and the CPU type, but not the
-# manufacturer.  We pick the logical manufacturer.
-vendor=unknown
-case $basic_machine in
-	*-unknown)
-		case $os in
-			-riscix*)
-				vendor=acorn
-				;;
-			-sunos*)
-				vendor=sun
-				;;
-			-aix*)
-				vendor=ibm
-				;;
-			-beos*)
-				vendor=be
-				;;
-			-hpux*)
-				vendor=hp
-				;;
-			-mpeix*)
-				vendor=hp
-				;;
-			-hiux*)
-				vendor=hitachi
-				;;
-			-unos*)
-				vendor=crds
-				;;
-			-dgux*)
-				vendor=dg
-				;;
-			-luna*)
-				vendor=omron
-				;;
-			-genix*)
-				vendor=ns
-				;;
-			-mvs* | -opened*)
-				vendor=ibm
-				;;
-			-os400*)
-				vendor=ibm
-				;;
-			-ptx*)
-				vendor=sequent
-				;;
-			-tpf*)
-				vendor=ibm
-				;;
-			-vxsim* | -vxworks* | -windiss*)
-				vendor=wrs
-				;;
-			-aux*)
-				vendor=apple
-				;;
-			-hms*)
-				vendor=hitachi
-				;;
-			-mpw* | -macos*)
-				vendor=apple
-				;;
-			-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
-				vendor=atari
-				;;
-			-vos*)
-				vendor=stratus
-				;;
-		esac
-		basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
-		;;
-esac
-
-echo $basic_machine$os
-exit 0
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "timestamp='"
-# time-stamp-format: "%:y-%02m-%02d"
-# time-stamp-end: "'"
-# End:
diff --git a/main/libresample/configure b/main/libresample/configure
deleted file mode 100755
index 638280399..000000000
--- a/main/libresample/configure
+++ /dev/null
@@ -1,4552 +0,0 @@
-#! /bin/sh
-# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.59.
-#
-# Copyright (C) 2003 Free Software Foundation, Inc.
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-## --------------------- ##
-## M4sh Initialization.  ##
-## --------------------- ##
-
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-  emulate sh
-  NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '${1+"$@"}'='"$@"'
-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
-  set -o posix
-fi
-DUALCASE=1; export DUALCASE # for MKS sh
-
-# Support unset when possible.
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
-  as_unset=unset
-else
-  as_unset=false
-fi
-
-
-# Work around bugs in pre-3.0 UWIN ksh.
-$as_unset ENV MAIL MAILPATH
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-for as_var in \
-  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
-  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
-  LC_TELEPHONE LC_TIME
-do
-  if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
-    eval $as_var=C; export $as_var
-  else
-    $as_unset $as_var
-  fi
-done
-
-# Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1; then
-  as_expr=expr
-else
-  as_expr=false
-fi
-
-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
-  as_basename=basename
-else
-  as_basename=false
-fi
-
-
-# Name of the executable.
-as_me=`$as_basename "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
-	 X"$0" : 'X\(//\)$' \| \
-	 X"$0" : 'X\(/\)$' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X/"$0" |
-    sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
-  	  /^X\/\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\/\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-
-
-# PATH needs CR, and LINENO needs CR and PATH.
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
-  echo "#! /bin/sh" >conf$$.sh
-  echo  "exit 0"   >>conf$$.sh
-  chmod +x conf$$.sh
-  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-    PATH_SEPARATOR=';'
-  else
-    PATH_SEPARATOR=:
-  fi
-  rm -f conf$$.sh
-fi
-
-
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x$as_lineno_3"  = "x$as_lineno_2"  || {
-  # Find who we are.  Look in the path if we contain no path at all
-  # relative or not.
-  case $0 in
-    *[\\/]* ) as_myself=$0 ;;
-    *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
-
-       ;;
-  esac
-  # We did not find ourselves, most probably we were run as `sh COMMAND'
-  # in which case we are not to be found in the path.
-  if test "x$as_myself" = x; then
-    as_myself=$0
-  fi
-  if test ! -f "$as_myself"; then
-    { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2
-   { (exit 1); exit 1; }; }
-  fi
-  case $CONFIG_SHELL in
-  '')
-    as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for as_base in sh bash ksh sh5; do
-	 case $as_dir in
-	 /*)
-	   if ("$as_dir/$as_base" -c '
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x$as_lineno_3"  = "x$as_lineno_2" ') 2>/dev/null; then
-	     $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
-	     $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
-	     CONFIG_SHELL=$as_dir/$as_base
-	     export CONFIG_SHELL
-	     exec "$CONFIG_SHELL" "$0" ${1+"$@"}
-	   fi;;
-	 esac
-       done
-done
-;;
-  esac
-
-  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
-  # uniformly replaced by the line number.  The first 'sed' inserts a
-  # line-number line before each line; the second 'sed' does the real
-  # work.  The second script uses 'N' to pair each line-number line
-  # with the numbered line, and appends trailing '-' during
-  # substitution so that $LINENO is not a special case at line end.
-  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
-  # second 'sed' script.  Blame Lee E. McMahon for sed's syntax.  :-)
-  sed '=' <$as_myself |
-    sed '
-      N
-      s,$,-,
-      : loop
-      s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
-      t loop
-      s,-$,,
-      s,^['$as_cr_digits']*\n,,
-    ' >$as_me.lineno &&
-  chmod +x $as_me.lineno ||
-    { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
-   { (exit 1); exit 1; }; }
-
-  # Don't try to exec as it changes $[0], causing all sort of problems
-  # (the dirname of $[0] is not the place where we might find the
-  # original and so on.  Autoconf is especially sensible to this).
-  . ./$as_me.lineno
-  # Exit status is that of the last command.
-  exit
-}
-
-
-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
-  *c*,-n*) ECHO_N= ECHO_C='
-' ECHO_T='	' ;;
-  *c*,*  ) ECHO_N=-n ECHO_C= ECHO_T= ;;
-  *)       ECHO_N= ECHO_C='\c' ECHO_T= ;;
-esac
-
-if expr a : '\(a\)' >/dev/null 2>&1; then
-  as_expr=expr
-else
-  as_expr=false
-fi
-
-rm -f conf$$ conf$$.exe conf$$.file
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
-  # We could just check for DJGPP; but this test a) works b) is more generic
-  # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
-  if test -f conf$$.exe; then
-    # Don't use ln at all; we don't have any links
-    as_ln_s='cp -p'
-  else
-    as_ln_s='ln -s'
-  fi
-elif ln conf$$.file conf$$ 2>/dev/null; then
-  as_ln_s=ln
-else
-  as_ln_s='cp -p'
-fi
-rm -f conf$$ conf$$.exe conf$$.file
-
-if mkdir -p . 2>/dev/null; then
-  as_mkdir_p=:
-else
-  test -d ./-p && rmdir ./-p
-  as_mkdir_p=false
-fi
-
-as_executable_p="test -f"
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-# IFS
-# We need space, tab and new line, in precisely that order.
-as_nl='
-'
-IFS=" 	$as_nl"
-
-# CDPATH.
-$as_unset CDPATH
-
-
-# Name of the host.
-# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
-# so uname gets run too.
-ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
-
-exec 6>&1
-
-#
-# Initializations.
-#
-ac_default_prefix=/usr/local
-ac_config_libobj_dir=.
-cross_compiling=no
-subdirs=
-MFLAGS=
-MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-
-# Maximum number of lines to put in a shell here document.
-# This variable seems obsolete.  It should probably be removed, and
-# only ac_max_sed_lines should be used.
-: ${ac_max_here_lines=38}
-
-# Identity of this package.
-PACKAGE_NAME=
-PACKAGE_TARNAME=
-PACKAGE_VERSION=
-PACKAGE_STRING=
-PACKAGE_BUGREPORT=
-
-ac_unique_file="src/resample.c"
-# Factoring default headers for most tests.
-ac_includes_default="\
-#include <stdio.h>
-#if HAVE_SYS_TYPES_H
-# include <sys/types.h>
-#endif
-#if HAVE_SYS_STAT_H
-# include <sys/stat.h>
-#endif
-#if STDC_HEADERS
-# include <stdlib.h>
-# include <stddef.h>
-#else
-# if HAVE_STDLIB_H
-#  include <stdlib.h>
-# endif
-#endif
-#if HAVE_STRING_H
-# if !STDC_HEADERS && HAVE_MEMORY_H
-#  include <memory.h>
-# endif
-# include <string.h>
-#endif
-#if HAVE_STRINGS_H
-# include <strings.h>
-#endif
-#if HAVE_INTTYPES_H
-# include <inttypes.h>
-#else
-# if HAVE_STDINT_H
-#  include <stdint.h>
-# endif
-#endif
-#if HAVE_UNISTD_H
-# include <unistd.h>
-#endif"
-
-ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT RANLIB ac_ct_RANLIB AR TARGETS CPP EGREP LIBOBJS LTLIBOBJS'
-ac_subst_files=''
-
-# Initialize some variables set by options.
-ac_init_help=
-ac_init_version=false
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-cache_file=/dev/null
-exec_prefix=NONE
-no_create=
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-srcdir=
-verbose=
-x_includes=NONE
-x_libraries=NONE
-
-# Installation directory options.
-# These are left unexpanded so users can "make install exec_prefix=/foo"
-# and all the variables that are supposed to be based on exec_prefix
-# by default will actually change.
-# Use braces instead of parens because sh, perl, etc. also accept them.
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-ac_prev=
-for ac_option
-do
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'`
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case $ac_option in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir=$ac_optarg ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build_alias ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build_alias=$ac_optarg ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file=$ac_optarg ;;
-
-  --config-cache | -C)
-    cache_file=config.cache ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir=$ac_optarg ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid feature name: $ac_feature" >&2
-   { (exit 1); exit 1; }; }
-    ac_feature=`echo $ac_feature | sed 's/-/_/g'`
-    eval "enable_$ac_feature=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid feature name: $ac_feature" >&2
-   { (exit 1); exit 1; }; }
-    ac_feature=`echo $ac_feature | sed 's/-/_/g'`
-    case $ac_option in
-      *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_$ac_feature='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix=$ac_optarg ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he | -h)
-    ac_init_help=long ;;
-  -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
-    ac_init_help=recursive ;;
-  -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
-    ac_init_help=short ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host_alias ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host_alias=$ac_optarg ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir=$ac_optarg ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir=$ac_optarg ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir=$ac_optarg ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir=$ac_optarg ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir=$ac_optarg ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir=$ac_optarg ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c | -n)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir=$ac_optarg ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix=$ac_optarg ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix=$ac_optarg ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix=$ac_optarg ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name=$ac_optarg ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir=$ac_optarg ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir=$ac_optarg ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site=$ac_optarg ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir=$ac_optarg ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir=$ac_optarg ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target_alias ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target_alias=$ac_optarg ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers | -V)
-    ac_init_version=: ;;
-
-  -with-* | --with-*)
-    ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid package name: $ac_package" >&2
-   { (exit 1); exit 1; }; }
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case $ac_option in
-      *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_$ac_package='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid package name: $ac_package" >&2
-   { (exit 1); exit 1; }; }
-    ac_package=`echo $ac_package | sed 's/-/_/g'`
-    eval "with_$ac_package=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes=$ac_optarg ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries=$ac_optarg ;;
-
-  -*) { echo "$as_me: error: unrecognized option: $ac_option
-Try \`$0 --help' for more information." >&2
-   { (exit 1); exit 1; }; }
-    ;;
-
-  *=*)
-    ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
-   { (exit 1); exit 1; }; }
-    ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`
-    eval "$ac_envvar='$ac_optarg'"
-    export $ac_envvar ;;
-
-  *)
-    # FIXME: should be removed in autoconf 3.0.
-    echo "$as_me: WARNING: you should use --build, --host, --target" >&2
-    expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-      echo "$as_me: WARNING: invalid host type: $ac_option" >&2
-    : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  ac_option=--`echo $ac_prev | sed 's/_/-/g'`
-  { echo "$as_me: error: missing argument to $ac_option" >&2
-   { (exit 1); exit 1; }; }
-fi
-
-# Be sure to have absolute paths.
-for ac_var in exec_prefix prefix
-do
-  eval ac_val=$`echo $ac_var`
-  case $ac_val in
-    [\\/$]* | ?:[\\/]* | NONE | '' ) ;;
-    *)  { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
-   { (exit 1); exit 1; }; };;
-  esac
-done
-
-# Be sure to have absolute paths.
-for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \
-	      localstatedir libdir includedir oldincludedir infodir mandir
-do
-  eval ac_val=$`echo $ac_var`
-  case $ac_val in
-    [\\/$]* | ?:[\\/]* ) ;;
-    *)  { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
-   { (exit 1); exit 1; }; };;
-  esac
-done
-
-# There might be people who depend on the old broken behavior: `$host'
-# used to hold the argument of --host etc.
-# FIXME: To remove some day.
-build=$build_alias
-host=$host_alias
-target=$target_alias
-
-# FIXME: To remove some day.
-if test "x$host_alias" != x; then
-  if test "x$build_alias" = x; then
-    cross_compiling=maybe
-    echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
-    If a cross compiler is detected then cross compile mode will be used." >&2
-  elif test "x$build_alias" != "x$host_alias"; then
-    cross_compiling=yes
-  fi
-fi
-
-ac_tool_prefix=
-test -n "$host_alias" && ac_tool_prefix=$host_alias-
-
-test "$silent" = yes && exec 6>/dev/null
-
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_confdir=`(dirname "$0") 2>/dev/null ||
-$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$0" : 'X\(//\)[^/]' \| \
-	 X"$0" : 'X\(//\)$' \| \
-	 X"$0" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X"$0" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2
-   { (exit 1); exit 1; }; }
-  else
-    { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
-   { (exit 1); exit 1; }; }
-  fi
-fi
-(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null ||
-  { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2
-   { (exit 1); exit 1; }; }
-srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'`
-ac_env_build_alias_set=${build_alias+set}
-ac_env_build_alias_value=$build_alias
-ac_cv_env_build_alias_set=${build_alias+set}
-ac_cv_env_build_alias_value=$build_alias
-ac_env_host_alias_set=${host_alias+set}
-ac_env_host_alias_value=$host_alias
-ac_cv_env_host_alias_set=${host_alias+set}
-ac_cv_env_host_alias_value=$host_alias
-ac_env_target_alias_set=${target_alias+set}
-ac_env_target_alias_value=$target_alias
-ac_cv_env_target_alias_set=${target_alias+set}
-ac_cv_env_target_alias_value=$target_alias
-ac_env_CC_set=${CC+set}
-ac_env_CC_value=$CC
-ac_cv_env_CC_set=${CC+set}
-ac_cv_env_CC_value=$CC
-ac_env_CFLAGS_set=${CFLAGS+set}
-ac_env_CFLAGS_value=$CFLAGS
-ac_cv_env_CFLAGS_set=${CFLAGS+set}
-ac_cv_env_CFLAGS_value=$CFLAGS
-ac_env_LDFLAGS_set=${LDFLAGS+set}
-ac_env_LDFLAGS_value=$LDFLAGS
-ac_cv_env_LDFLAGS_set=${LDFLAGS+set}
-ac_cv_env_LDFLAGS_value=$LDFLAGS
-ac_env_CPPFLAGS_set=${CPPFLAGS+set}
-ac_env_CPPFLAGS_value=$CPPFLAGS
-ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set}
-ac_cv_env_CPPFLAGS_value=$CPPFLAGS
-ac_env_CPP_set=${CPP+set}
-ac_env_CPP_value=$CPP
-ac_cv_env_CPP_set=${CPP+set}
-ac_cv_env_CPP_value=$CPP
-
-#
-# Report the --help message.
-#
-if test "$ac_init_help" = "long"; then
-  # Omit some internal or obsolete options to make the list less imposing.
-  # This message is too long to be a string in the A/UX 3.1 sh.
-  cat <<_ACEOF
-\`configure' configures this package to adapt to many kinds of systems.
-
-Usage: $0 [OPTION]... [VAR=VALUE]...
-
-To assign environment variables (e.g., CC, CFLAGS...), specify them as
-VAR=VALUE.  See below for descriptions of some of the useful variables.
-
-Defaults for the options are specified in brackets.
-
-Configuration:
-  -h, --help              display this help and exit
-      --help=short        display options specific to this package
-      --help=recursive    display the short help of all the included packages
-  -V, --version           display version information and exit
-  -q, --quiet, --silent   do not print \`checking...' messages
-      --cache-file=FILE   cache test results in FILE [disabled]
-  -C, --config-cache      alias for \`--cache-file=config.cache'
-  -n, --no-create         do not create output files
-      --srcdir=DIR        find the sources in DIR [configure dir or \`..']
-
-_ACEOF
-
-  cat <<_ACEOF
-Installation directories:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-			  [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-			  [PREFIX]
-
-By default, \`make install' will install all the files in
-\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
-an installation prefix other than \`$ac_default_prefix' using \`--prefix',
-for instance \`--prefix=\$HOME'.
-
-For better control, use the options below.
-
-Fine tuning of the installation directories:
-  --bindir=DIR           user executables [EPREFIX/bin]
-  --sbindir=DIR          system admin executables [EPREFIX/sbin]
-  --libexecdir=DIR       program executables [EPREFIX/libexec]
-  --datadir=DIR          read-only architecture-independent data [PREFIX/share]
-  --sysconfdir=DIR       read-only single-machine data [PREFIX/etc]
-  --sharedstatedir=DIR   modifiable architecture-independent data [PREFIX/com]
-  --localstatedir=DIR    modifiable single-machine data [PREFIX/var]
-  --libdir=DIR           object code libraries [EPREFIX/lib]
-  --includedir=DIR       C header files [PREFIX/include]
-  --oldincludedir=DIR    C header files for non-gcc [/usr/include]
-  --infodir=DIR          info documentation [PREFIX/info]
-  --mandir=DIR           man documentation [PREFIX/man]
-_ACEOF
-
-  cat <<\_ACEOF
-_ACEOF
-fi
-
-if test -n "$ac_init_help"; then
-
-  cat <<\_ACEOF
-
-Some influential environment variables:
-  CC          C compiler command
-  CFLAGS      C compiler flags
-  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
-              nonstandard directory <lib dir>
-  CPPFLAGS    C/C++ preprocessor flags, e.g. -I<include dir> if you have
-              headers in a nonstandard directory <include dir>
-  CPP         C preprocessor
-
-Use these variables to override the choices made by `configure' or to help
-it to find libraries and programs with nonstandard names/locations.
-
-_ACEOF
-fi
-
-if test "$ac_init_help" = "recursive"; then
-  # If there are subdirs, report their specific --help.
-  ac_popdir=`pwd`
-  for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
-    test -d $ac_dir || continue
-    ac_builddir=.
-
-if test "$ac_dir" != .; then
-  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-  # A "../" for each directory in $ac_dir_suffix.
-  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
-  ac_dir_suffix= ac_top_builddir=
-fi
-
-case $srcdir in
-  .)  # No --srcdir option.  We are building in place.
-    ac_srcdir=.
-    if test -z "$ac_top_builddir"; then
-       ac_top_srcdir=.
-    else
-       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
-    fi ;;
-  [\\/]* | ?:[\\/]* )  # Absolute path.
-    ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir ;;
-  *) # Relative path.
-    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_builddir$srcdir ;;
-esac
-
-# Do not use `cd foo && pwd` to compute absolute paths, because
-# the directories may not exist.
-case `pwd` in
-.) ac_abs_builddir="$ac_dir";;
-*)
-  case "$ac_dir" in
-  .) ac_abs_builddir=`pwd`;;
-  [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
-  *) ac_abs_builddir=`pwd`/"$ac_dir";;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_builddir=${ac_top_builddir}.;;
-*)
-  case ${ac_top_builddir}. in
-  .) ac_abs_top_builddir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
-  *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_srcdir=$ac_srcdir;;
-*)
-  case $ac_srcdir in
-  .) ac_abs_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
-  *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_srcdir=$ac_top_srcdir;;
-*)
-  case $ac_top_srcdir in
-  .) ac_abs_top_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
-  *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
-  esac;;
-esac
-
-    cd $ac_dir
-    # Check for guested configure; otherwise get Cygnus style configure.
-    if test -f $ac_srcdir/configure.gnu; then
-      echo
-      $SHELL $ac_srcdir/configure.gnu  --help=recursive
-    elif test -f $ac_srcdir/configure; then
-      echo
-      $SHELL $ac_srcdir/configure  --help=recursive
-    elif test -f $ac_srcdir/configure.ac ||
-	   test -f $ac_srcdir/configure.in; then
-      echo
-      $ac_configure --help
-    else
-      echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
-    fi
-    cd "$ac_popdir"
-  done
-fi
-
-test -n "$ac_init_help" && exit 0
-if $ac_init_version; then
-  cat <<\_ACEOF
-
-Copyright (C) 2003 Free Software Foundation, Inc.
-This configure script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it.
-_ACEOF
-  exit 0
-fi
-exec 5>config.log
-cat >&5 <<_ACEOF
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-
-It was created by $as_me, which was
-generated by GNU Autoconf 2.59.  Invocation command line was
-
-  $ $0 $@
-
-_ACEOF
-{
-cat <<_ASUNAME
-## --------- ##
-## Platform. ##
-## --------- ##
-
-hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
-uname -m = `(uname -m) 2>/dev/null || echo unknown`
-uname -r = `(uname -r) 2>/dev/null || echo unknown`
-uname -s = `(uname -s) 2>/dev/null || echo unknown`
-uname -v = `(uname -v) 2>/dev/null || echo unknown`
-
-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
-/bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`
-
-/bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
-/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
-hostinfo               = `(hostinfo) 2>/dev/null               || echo unknown`
-/bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
-/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
-/bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
-
-_ASUNAME
-
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  echo "PATH: $as_dir"
-done
-
-} >&5
-
-cat >&5 <<_ACEOF
-
-
-## ----------- ##
-## Core tests. ##
-## ----------- ##
-
-_ACEOF
-
-
-# Keep a trace of the command line.
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Strip out --silent because we don't want to record it for future runs.
-# Also quote any args containing shell meta-characters.
-# Make two passes to allow for proper duplicate-argument suppression.
-ac_configure_args=
-ac_configure_args0=
-ac_configure_args1=
-ac_sep=
-ac_must_keep_next=false
-for ac_pass in 1 2
-do
-  for ac_arg
-  do
-    case $ac_arg in
-    -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
-    -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-    | -silent | --silent | --silen | --sile | --sil)
-      continue ;;
-    *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
-      ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
-    esac
-    case $ac_pass in
-    1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
-    2)
-      ac_configure_args1="$ac_configure_args1 '$ac_arg'"
-      if test $ac_must_keep_next = true; then
-	ac_must_keep_next=false # Got value, back to normal.
-      else
-	case $ac_arg in
-	  *=* | --config-cache | -C | -disable-* | --disable-* \
-	  | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
-	  | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
-	  | -with-* | --with-* | -without-* | --without-* | --x)
-	    case "$ac_configure_args0 " in
-	      "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
-	    esac
-	    ;;
-	  -* ) ac_must_keep_next=true ;;
-	esac
-      fi
-      ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
-      # Get rid of the leading space.
-      ac_sep=" "
-      ;;
-    esac
-  done
-done
-$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
-$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
-
-# When interrupted or exit'd, cleanup temporary files, and complete
-# config.log.  We remove comments because anyway the quotes in there
-# would cause problems or look ugly.
-# WARNING: Be sure not to use single quotes in there, as some shells,
-# such as our DU 5.0 friend, will then `close' the trap.
-trap 'exit_status=$?
-  # Save into config.log some information that might help in debugging.
-  {
-    echo
-
-    cat <<\_ASBOX
-## ---------------- ##
-## Cache variables. ##
-## ---------------- ##
-_ASBOX
-    echo
-    # The following way of writing the cache mishandles newlines in values,
-{
-  (set) 2>&1 |
-    case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
-    *ac_space=\ *)
-      sed -n \
-	"s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
-	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
-      ;;
-    *)
-      sed -n \
-	"s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
-      ;;
-    esac;
-}
-    echo
-
-    cat <<\_ASBOX
-## ----------------- ##
-## Output variables. ##
-## ----------------- ##
-_ASBOX
-    echo
-    for ac_var in $ac_subst_vars
-    do
-      eval ac_val=$`echo $ac_var`
-      echo "$ac_var='"'"'$ac_val'"'"'"
-    done | sort
-    echo
-
-    if test -n "$ac_subst_files"; then
-      cat <<\_ASBOX
-## ------------- ##
-## Output files. ##
-## ------------- ##
-_ASBOX
-      echo
-      for ac_var in $ac_subst_files
-      do
-	eval ac_val=$`echo $ac_var`
-	echo "$ac_var='"'"'$ac_val'"'"'"
-      done | sort
-      echo
-    fi
-
-    if test -s confdefs.h; then
-      cat <<\_ASBOX
-## ----------- ##
-## confdefs.h. ##
-## ----------- ##
-_ASBOX
-      echo
-      sed "/^$/d" confdefs.h | sort
-      echo
-    fi
-    test "$ac_signal" != 0 &&
-      echo "$as_me: caught signal $ac_signal"
-    echo "$as_me: exit $exit_status"
-  } >&5
-  rm -f core *.core &&
-  rm -rf conftest* confdefs* conf$$* $ac_clean_files &&
-    exit $exit_status
-     ' 0
-for ac_signal in 1 2 13 15; do
-  trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
-done
-ac_signal=0
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo >confdefs.h
-
-# Predefined preprocessor variables.
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_NAME "$PACKAGE_NAME"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_VERSION "$PACKAGE_VERSION"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_STRING "$PACKAGE_STRING"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
-_ACEOF
-
-
-# Let the site file select an alternate cache file if it wants to.
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$CONFIG_SITE"; then
-  if test "x$prefix" != xNONE; then
-    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-  else
-    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-  fi
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
-echo "$as_me: loading site script $ac_site_file" >&6;}
-    sed 's/^/| /' "$ac_site_file" >&5
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  # Some versions of bash will fail to source /dev/null (special
-  # files actually), so we avoid doing that.
-  if test -f "$cache_file"; then
-    { echo "$as_me:$LINENO: loading cache $cache_file" >&5
-echo "$as_me: loading cache $cache_file" >&6;}
-    case $cache_file in
-      [\\/]* | ?:[\\/]* ) . $cache_file;;
-      *)                      . ./$cache_file;;
-    esac
-  fi
-else
-  { echo "$as_me:$LINENO: creating cache $cache_file" >&5
-echo "$as_me: creating cache $cache_file" >&6;}
-  >$cache_file
-fi
-
-# Check that the precious variables saved in the cache have kept the same
-# value.
-ac_cache_corrupted=false
-for ac_var in `(set) 2>&1 |
-	       sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
-  eval ac_old_set=\$ac_cv_env_${ac_var}_set
-  eval ac_new_set=\$ac_env_${ac_var}_set
-  eval ac_old_val="\$ac_cv_env_${ac_var}_value"
-  eval ac_new_val="\$ac_env_${ac_var}_value"
-  case $ac_old_set,$ac_new_set in
-    set,)
-      { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
-echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
-      ac_cache_corrupted=: ;;
-    ,set)
-      { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
-echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
-      ac_cache_corrupted=: ;;
-    ,);;
-    *)
-      if test "x$ac_old_val" != "x$ac_new_val"; then
-	{ echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
-echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
-	{ echo "$as_me:$LINENO:   former value:  $ac_old_val" >&5
-echo "$as_me:   former value:  $ac_old_val" >&2;}
-	{ echo "$as_me:$LINENO:   current value: $ac_new_val" >&5
-echo "$as_me:   current value: $ac_new_val" >&2;}
-	ac_cache_corrupted=:
-      fi;;
-  esac
-  # Pass precious variables to config.status.
-  if test "$ac_new_set" = set; then
-    case $ac_new_val in
-    *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
-      ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
-    *) ac_arg=$ac_var=$ac_new_val ;;
-    esac
-    case " $ac_configure_args " in
-      *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
-      *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-    esac
-  fi
-done
-if $ac_cache_corrupted; then
-  { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
-echo "$as_me: error: changes in the environment can compromise the build" >&2;}
-  { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
-echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
-   { (exit 1); exit 1; }; }
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}gcc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_CC="${ac_tool_prefix}gcc"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
-  echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-fi
-if test -z "$ac_cv_prog_CC"; then
-  ac_ct_CC=$CC
-  # Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$ac_ct_CC"; then
-  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_CC="gcc"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
-  echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-  CC=$ac_ct_CC
-else
-  CC="$ac_cv_prog_CC"
-fi
-
-if test -z "$CC"; then
-  if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}cc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_CC="${ac_tool_prefix}cc"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
-  echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-fi
-if test -z "$ac_cv_prog_CC"; then
-  ac_ct_CC=$CC
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$ac_ct_CC"; then
-  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_CC="cc"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
-  echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-  CC=$ac_ct_CC
-else
-  CC="$ac_cv_prog_CC"
-fi
-
-fi
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  ac_prog_rejected=no
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
-       ac_prog_rejected=yes
-       continue
-     fi
-    ac_cv_prog_CC="cc"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# != 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
-  fi
-fi
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
-  echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-fi
-if test -z "$CC"; then
-  if test -n "$ac_tool_prefix"; then
-  for ac_prog in cl
-  do
-    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
-  echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-    test -n "$CC" && break
-  done
-fi
-if test -z "$CC"; then
-  ac_ct_CC=$CC
-  for ac_prog in cl
-do
-  # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$ac_ct_CC"; then
-  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_CC="$ac_prog"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
-  echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-  test -n "$ac_ct_CC" && break
-done
-
-  CC=$ac_ct_CC
-fi
-
-fi
-
-
-test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
-See \`config.log' for more details." >&5
-echo "$as_me: error: no acceptable C compiler found in \$PATH
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
-
-# Provide some information about the compiler.
-echo "$as_me:$LINENO:" \
-     "checking for C compiler version" >&5
-ac_compiler=`set X $ac_compile; echo $2`
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
-  (eval $ac_compiler --version </dev/null >&5) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5
-  (eval $ac_compiler -v </dev/null >&5) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5
-  (eval $ac_compiler -V </dev/null >&5) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files a.out a.exe b.out"
-# Try to create an executable without -o first, disregard a.out.
-# It will help us diagnose broken compilers, and finding out an intuition
-# of exeext.
-echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
-echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6
-ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
-if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5
-  (eval $ac_link_default) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-  # Find the output, starting from the most likely.  This scheme is
-# not robust to junk in `.', hence go to wildcards (a.*) only as a last
-# resort.
-
-# Be careful to initialize this variable, since it used to be cached.
-# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile.
-ac_cv_exeext=
-# b.out is created by i960 compilers.
-for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out
-do
-  test -f "$ac_file" || continue
-  case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj )
-	;;
-    conftest.$ac_ext )
-	# This is the source file.
-	;;
-    [ab].out )
-	# We found the default executable, but exeext='' is most
-	# certainly right.
-	break;;
-    *.* )
-	ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-	# FIXME: I believe we export ac_cv_exeext for Libtool,
-	# but it would be cool to find out if it's true.  Does anybody
-	# maintain Libtool? --akim.
-	export ac_cv_exeext
-	break;;
-    * )
-	break;;
-  esac
-done
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-{ { echo "$as_me:$LINENO: error: C compiler cannot create executables
-See \`config.log' for more details." >&5
-echo "$as_me: error: C compiler cannot create executables
-See \`config.log' for more details." >&2;}
-   { (exit 77); exit 77; }; }
-fi
-
-ac_exeext=$ac_cv_exeext
-echo "$as_me:$LINENO: result: $ac_file" >&5
-echo "${ECHO_T}$ac_file" >&6
-
-# Check the compiler produces executables we can run.  If not, either
-# the compiler is broken, or we cross compile.
-echo "$as_me:$LINENO: checking whether the C compiler works" >&5
-echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6
-# FIXME: These cross compiler hacks should be removed for Autoconf 3.0
-# If not cross compiling, check that we can run a simple program.
-if test "$cross_compiling" != yes; then
-  if { ac_try='./$ac_file'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-    cross_compiling=no
-  else
-    if test "$cross_compiling" = maybe; then
-	cross_compiling=yes
-    else
-	{ { echo "$as_me:$LINENO: error: cannot run C compiled programs.
-If you meant to cross compile, use \`--host'.
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot run C compiled programs.
-If you meant to cross compile, use \`--host'.
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
-    fi
-  fi
-fi
-echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-
-rm -f a.out a.exe conftest$ac_cv_exeext b.out
-ac_clean_files=$ac_clean_files_save
-# Check the compiler produces executables we can run.  If not, either
-# the compiler is broken, or we cross compile.
-echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
-echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6
-echo "$as_me:$LINENO: result: $cross_compiling" >&5
-echo "${ECHO_T}$cross_compiling" >&6
-
-echo "$as_me:$LINENO: checking for suffix of executables" >&5
-echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-  # If both `conftest.exe' and `conftest' are `present' (well, observable)
-# catch `conftest.exe'.  For instance with Cygwin, `ls conftest' will
-# work properly (i.e., refer to `conftest.exe'), while it won't with
-# `rm'.
-for ac_file in conftest.exe conftest conftest.*; do
-  test -f "$ac_file" || continue
-  case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;;
-    *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-	  export ac_cv_exeext
-	  break;;
-    * ) break;;
-  esac
-done
-else
-  { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
-fi
-
-rm -f conftest$ac_cv_exeext
-echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
-echo "${ECHO_T}$ac_cv_exeext" >&6
-
-rm -f conftest.$ac_ext
-EXEEXT=$ac_cv_exeext
-ac_exeext=$EXEEXT
-echo "$as_me:$LINENO: checking for suffix of object files" >&5
-echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6
-if test "${ac_cv_objext+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.o conftest.obj
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-  for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do
-  case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;;
-    *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
-       break;;
-  esac
-done
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute suffix of object files: cannot compile
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
-fi
-
-rm -f conftest.$ac_cv_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
-echo "${ECHO_T}$ac_cv_objext" >&6
-OBJEXT=$ac_cv_objext
-ac_objext=$OBJEXT
-echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
-echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6
-if test "${ac_cv_c_compiler_gnu+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
-#ifndef __GNUC__
-       choke me
-#endif
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_compiler_gnu=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_compiler_gnu=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-ac_cv_c_compiler_gnu=$ac_compiler_gnu
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
-echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6
-GCC=`test $ac_compiler_gnu = yes && echo yes`
-ac_test_CFLAGS=${CFLAGS+set}
-ac_save_CFLAGS=$CFLAGS
-CFLAGS="-g"
-echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
-echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6
-if test "${ac_cv_prog_cc_g+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_prog_cc_g=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_prog_cc_g=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_g" >&6
-if test "$ac_test_CFLAGS" = set; then
-  CFLAGS=$ac_save_CFLAGS
-elif test $ac_cv_prog_cc_g = yes; then
-  if test "$GCC" = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-g"
-  fi
-else
-  if test "$GCC" = yes; then
-    CFLAGS="-O2"
-  else
-    CFLAGS=
-  fi
-fi
-echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5
-echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6
-if test "${ac_cv_prog_cc_stdc+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_cv_prog_cc_stdc=no
-ac_save_CC=$CC
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <stdarg.h>
-#include <stdio.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
-struct buf { int x; };
-FILE * (*rcsopen) (struct buf *, struct stat *, int);
-static char *e (p, i)
-     char **p;
-     int i;
-{
-  return p[i];
-}
-static char *f (char * (*g) (char **, int), char **p, ...)
-{
-  char *s;
-  va_list v;
-  va_start (v,p);
-  s = g (p, va_arg (v,int));
-  va_end (v);
-  return s;
-}
-
-/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default.  It has
-   function prototypes and stuff, but not '\xHH' hex character constants.
-   These don't provoke an error unfortunately, instead are silently treated
-   as 'x'.  The following induces an error, until -std1 is added to get
-   proper ANSI mode.  Curiously '\x00'!='x' always comes out true, for an
-   array size at least.  It's necessary to write '\x00'==0 to get something
-   that's true only with -std1.  */
-int osf4_cc_array ['\x00' == 0 ? 1 : -1];
-
-int test (int i, double x);
-struct s1 {int (*f) (int a);};
-struct s2 {int (*f) (double a);};
-int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
-int argc;
-char **argv;
-int
-main ()
-{
-return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
-  ;
-  return 0;
-}
-_ACEOF
-# Don't try gcc -ansi; that turns off useful extensions and
-# breaks some systems' header files.
-# AIX			-qlanglvl=ansi
-# Ultrix and OSF/1	-std1
-# HP-UX 10.20 and later	-Ae
-# HP-UX older versions	-Aa -D_HPUX_SOURCE
-# SVR4			-Xc -D__EXTENSIONS__
-for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
-do
-  CC="$ac_save_CC $ac_arg"
-  rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_prog_cc_stdc=$ac_arg
-break
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext
-done
-rm -f conftest.$ac_ext conftest.$ac_objext
-CC=$ac_save_CC
-
-fi
-
-case "x$ac_cv_prog_cc_stdc" in
-  x|xno)
-    echo "$as_me:$LINENO: result: none needed" >&5
-echo "${ECHO_T}none needed" >&6 ;;
-  *)
-    echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6
-    CC="$CC $ac_cv_prog_cc_stdc" ;;
-esac
-
-# Some people use a C++ compiler to compile C.  Since we use `exit',
-# in C++ we need to declare it.  In case someone uses the same compiler
-# for both compiling C and C++ we need to have the C++ compiler decide
-# the declaration of exit, since it's the most demanding environment.
-cat >conftest.$ac_ext <<_ACEOF
-#ifndef __cplusplus
-  choke me
-#endif
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  for ac_declaration in \
-   '' \
-   'extern "C" void std::exit (int) throw (); using std::exit;' \
-   'extern "C" void std::exit (int); using std::exit;' \
-   'extern "C" void exit (int) throw ();' \
-   'extern "C" void exit (int);' \
-   'void exit (int);'
-do
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_declaration
-#include <stdlib.h>
-int
-main ()
-{
-exit (42);
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  :
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-continue
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_declaration
-int
-main ()
-{
-exit (42);
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  break
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-done
-rm -f conftest*
-if test -n "$ac_declaration"; then
-  echo '#ifdef __cplusplus' >>confdefs.h
-  echo $ac_declaration      >>confdefs.h
-  echo '#endif'             >>confdefs.h
-fi
-
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_RANLIB+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-fi
-fi
-RANLIB=$ac_cv_prog_RANLIB
-if test -n "$RANLIB"; then
-  echo "$as_me:$LINENO: result: $RANLIB" >&5
-echo "${ECHO_T}$RANLIB" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-fi
-if test -z "$ac_cv_prog_RANLIB"; then
-  ac_ct_RANLIB=$RANLIB
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$ac_ct_RANLIB"; then
-  ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_RANLIB="ranlib"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":"
-fi
-fi
-ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
-if test -n "$ac_ct_RANLIB"; then
-  echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
-echo "${ECHO_T}$ac_ct_RANLIB" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-  RANLIB=$ac_ct_RANLIB
-else
-  RANLIB="$ac_cv_prog_RANLIB"
-fi
-
-
-# Extract the first word of "ar", so it can be a program name with args.
-set dummy ar; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_AR+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case $AR in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_AR="$AR" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_AR="$as_dir/$ac_word$ac_exec_ext"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  test -z "$ac_cv_path_AR" && ac_cv_path_AR="no"
-  ;;
-esac
-fi
-AR=$ac_cv_path_AR
-
-if test -n "$AR"; then
-  echo "$as_me:$LINENO: result: $AR" >&5
-echo "${ECHO_T}$AR" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-if [ $AR = "no" ] ; then
-    { { echo "$as_me:$LINENO: error: \"Could not find ar - needed to create a library\"" >&5
-echo "$as_me: error: \"Could not find ar - needed to create a library\"" >&2;}
-   { (exit 1); exit 1; }; };
-fi
-
-
-TARGETS="libresample.a tests/testresample"
-
-
-echo "$as_me:$LINENO: checking for sf_open in -lsndfile" >&5
-echo $ECHO_N "checking for sf_open in -lsndfile... $ECHO_C" >&6
-if test "${ac_cv_lib_sndfile_sf_open+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lsndfile  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char sf_open ();
-int
-main ()
-{
-sf_open ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_sndfile_sf_open=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_sndfile_sf_open=no
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_sndfile_sf_open" >&5
-echo "${ECHO_T}$ac_cv_lib_sndfile_sf_open" >&6
-if test $ac_cv_lib_sndfile_sf_open = yes; then
-  have_libsndfile=yes
-else
-  have_libsndfile=no
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
-echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6
-# On Suns, sometimes $CPP names a directory.
-if test -n "$CPP" && test -d "$CPP"; then
-  CPP=
-fi
-if test -z "$CPP"; then
-  if test "${ac_cv_prog_CPP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-      # Double quotes because CPP needs to be expanded
-    for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
-    do
-      ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
-  # Use a header file that comes with gcc, so configuring glibc
-  # with a fresh cross-compiler works.
-  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-  # <limits.h> exists even on freestanding compilers.
-  # On the NeXT, cc -E runs the code through the compiler's parser,
-  # not just through cpp. "Syntax error" is here to catch this case.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-		     Syntax error
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
-  :
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  # Broken: fails on valid input.
-continue
-fi
-rm -f conftest.err conftest.$ac_ext
-
-  # OK, works on sane cases.  Now check whether non-existent headers
-  # can be detected and how.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <ac_nonexistent.h>
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
-  # Broken: success on invalid input.
-continue
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-rm -f conftest.err conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
-  break
-fi
-
-    done
-    ac_cv_prog_CPP=$CPP
-
-fi
-  CPP=$ac_cv_prog_CPP
-else
-  ac_cv_prog_CPP=$CPP
-fi
-echo "$as_me:$LINENO: result: $CPP" >&5
-echo "${ECHO_T}$CPP" >&6
-ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
-  # Use a header file that comes with gcc, so configuring glibc
-  # with a fresh cross-compiler works.
-  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-  # <limits.h> exists even on freestanding compilers.
-  # On the NeXT, cc -E runs the code through the compiler's parser,
-  # not just through cpp. "Syntax error" is here to catch this case.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-		     Syntax error
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
-  :
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  # Broken: fails on valid input.
-continue
-fi
-rm -f conftest.err conftest.$ac_ext
-
-  # OK, works on sane cases.  Now check whether non-existent headers
-  # can be detected and how.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <ac_nonexistent.h>
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
-  # Broken: success on invalid input.
-continue
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-rm -f conftest.err conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
-  :
-else
-  { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details." >&5
-echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-echo "$as_me:$LINENO: checking for egrep" >&5
-echo $ECHO_N "checking for egrep... $ECHO_C" >&6
-if test "${ac_cv_prog_egrep+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if echo a | (grep -E '(a|b)') >/dev/null 2>&1
-    then ac_cv_prog_egrep='grep -E'
-    else ac_cv_prog_egrep='egrep'
-    fi
-fi
-echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5
-echo "${ECHO_T}$ac_cv_prog_egrep" >&6
- EGREP=$ac_cv_prog_egrep
-
-
-echo "$as_me:$LINENO: checking for ANSI C header files" >&5
-echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6
-if test "${ac_cv_header_stdc+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <stdlib.h>
-#include <stdarg.h>
-#include <string.h>
-#include <float.h>
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_header_stdc=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_header_stdc=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-
-if test $ac_cv_header_stdc = yes; then
-  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <string.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "memchr" >/dev/null 2>&1; then
-  :
-else
-  ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
-  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <stdlib.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "free" >/dev/null 2>&1; then
-  :
-else
-  ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
-  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
-  if test "$cross_compiling" = yes; then
-  :
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <ctype.h>
-#if ((' ' & 0x0FF) == 0x020)
-# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
-# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
-#else
-# define ISLOWER(c) \
-		   (('a' <= (c) && (c) <= 'i') \
-		     || ('j' <= (c) && (c) <= 'r') \
-		     || ('s' <= (c) && (c) <= 'z'))
-# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
-#endif
-
-#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
-int
-main ()
-{
-  int i;
-  for (i = 0; i < 256; i++)
-    if (XOR (islower (i), ISLOWER (i))
-	|| toupper (i) != TOUPPER (i))
-      exit(2);
-  exit (0);
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  :
-else
-  echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-ac_cv_header_stdc=no
-fi
-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-fi
-fi
-echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
-echo "${ECHO_T}$ac_cv_header_stdc" >&6
-if test $ac_cv_header_stdc = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define STDC_HEADERS 1
-_ACEOF
-
-fi
-
-# On IRIX 5.3, sys/types and inttypes.h are conflicting.
-
-
-
-
-
-
-
-
-
-for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
-		  inttypes.h stdint.h unistd.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "$as_ac_Header=yes"
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-eval "$as_ac_Header=no"
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
-  cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
-
-if test "${ac_cv_header_sndfile_h+set}" = set; then
-  echo "$as_me:$LINENO: checking for sndfile.h" >&5
-echo $ECHO_N "checking for sndfile.h... $ECHO_C" >&6
-if test "${ac_cv_header_sndfile_h+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-fi
-echo "$as_me:$LINENO: result: $ac_cv_header_sndfile_h" >&5
-echo "${ECHO_T}$ac_cv_header_sndfile_h" >&6
-else
-  # Is the header compilable?
-echo "$as_me:$LINENO: checking sndfile.h usability" >&5
-echo $ECHO_N "checking sndfile.h usability... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-#include <sndfile.h>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_header_compiler=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_header_compiler=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6
-
-# Is the header present?
-echo "$as_me:$LINENO: checking sndfile.h presence" >&5
-echo $ECHO_N "checking sndfile.h presence... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <sndfile.h>
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
-  ac_header_preproc=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  ac_header_preproc=no
-fi
-rm -f conftest.err conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6
-
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-  yes:no: )
-    { echo "$as_me:$LINENO: WARNING: sndfile.h: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: sndfile.h: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { echo "$as_me:$LINENO: WARNING: sndfile.h: proceeding with the compiler's result" >&5
-echo "$as_me: WARNING: sndfile.h: proceeding with the compiler's result" >&2;}
-    ac_header_preproc=yes
-    ;;
-  no:yes:* )
-    { echo "$as_me:$LINENO: WARNING: sndfile.h: present but cannot be compiled" >&5
-echo "$as_me: WARNING: sndfile.h: present but cannot be compiled" >&2;}
-    { echo "$as_me:$LINENO: WARNING: sndfile.h:     check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: sndfile.h:     check for missing prerequisite headers?" >&2;}
-    { echo "$as_me:$LINENO: WARNING: sndfile.h: see the Autoconf documentation" >&5
-echo "$as_me: WARNING: sndfile.h: see the Autoconf documentation" >&2;}
-    { echo "$as_me:$LINENO: WARNING: sndfile.h:     section \"Present But Cannot Be Compiled\"" >&5
-echo "$as_me: WARNING: sndfile.h:     section \"Present But Cannot Be Compiled\"" >&2;}
-    { echo "$as_me:$LINENO: WARNING: sndfile.h: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: sndfile.h: proceeding with the preprocessor's result" >&2;}
-    { echo "$as_me:$LINENO: WARNING: sndfile.h: in the future, the compiler will take precedence" >&5
-echo "$as_me: WARNING: sndfile.h: in the future, the compiler will take precedence" >&2;}
-    (
-      cat <<\_ASBOX
-## ------------------------------------------ ##
-## Report this to the AC_PACKAGE_NAME lists.  ##
-## ------------------------------------------ ##
-_ASBOX
-    ) |
-      sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
-esac
-echo "$as_me:$LINENO: checking for sndfile.h" >&5
-echo $ECHO_N "checking for sndfile.h... $ECHO_C" >&6
-if test "${ac_cv_header_sndfile_h+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_cv_header_sndfile_h=$ac_header_preproc
-fi
-echo "$as_me:$LINENO: result: $ac_cv_header_sndfile_h" >&5
-echo "${ECHO_T}$ac_cv_header_sndfile_h" >&6
-
-fi
-if test $ac_cv_header_sndfile_h = yes; then
-  :
-else
-  have_libsndfile=no
-fi
-
-
-
-if [ $have_libsndfile = "yes" ] ; then
-	TARGETS="$TARGETS tests/resample-sndfile"
-fi
-
-echo "$as_me:$LINENO: checking for src_simple in -lsamplerate" >&5
-echo $ECHO_N "checking for src_simple in -lsamplerate... $ECHO_C" >&6
-if test "${ac_cv_lib_samplerate_src_simple+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lsamplerate  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char src_simple ();
-int
-main ()
-{
-src_simple ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_samplerate_src_simple=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_samplerate_src_simple=no
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_samplerate_src_simple" >&5
-echo "${ECHO_T}$ac_cv_lib_samplerate_src_simple" >&6
-if test $ac_cv_lib_samplerate_src_simple = yes; then
-  have_libsamplerate=yes
-else
-  have_libsamplerate=no
-fi
-
-if test "${ac_cv_header_samplerate_h+set}" = set; then
-  echo "$as_me:$LINENO: checking for samplerate.h" >&5
-echo $ECHO_N "checking for samplerate.h... $ECHO_C" >&6
-if test "${ac_cv_header_samplerate_h+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-fi
-echo "$as_me:$LINENO: result: $ac_cv_header_samplerate_h" >&5
-echo "${ECHO_T}$ac_cv_header_samplerate_h" >&6
-else
-  # Is the header compilable?
-echo "$as_me:$LINENO: checking samplerate.h usability" >&5
-echo $ECHO_N "checking samplerate.h usability... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-#include <samplerate.h>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_header_compiler=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_header_compiler=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6
-
-# Is the header present?
-echo "$as_me:$LINENO: checking samplerate.h presence" >&5
-echo $ECHO_N "checking samplerate.h presence... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <samplerate.h>
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
-  ac_header_preproc=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  ac_header_preproc=no
-fi
-rm -f conftest.err conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6
-
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-  yes:no: )
-    { echo "$as_me:$LINENO: WARNING: samplerate.h: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: samplerate.h: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { echo "$as_me:$LINENO: WARNING: samplerate.h: proceeding with the compiler's result" >&5
-echo "$as_me: WARNING: samplerate.h: proceeding with the compiler's result" >&2;}
-    ac_header_preproc=yes
-    ;;
-  no:yes:* )
-    { echo "$as_me:$LINENO: WARNING: samplerate.h: present but cannot be compiled" >&5
-echo "$as_me: WARNING: samplerate.h: present but cannot be compiled" >&2;}
-    { echo "$as_me:$LINENO: WARNING: samplerate.h:     check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: samplerate.h:     check for missing prerequisite headers?" >&2;}
-    { echo "$as_me:$LINENO: WARNING: samplerate.h: see the Autoconf documentation" >&5
-echo "$as_me: WARNING: samplerate.h: see the Autoconf documentation" >&2;}
-    { echo "$as_me:$LINENO: WARNING: samplerate.h:     section \"Present But Cannot Be Compiled\"" >&5
-echo "$as_me: WARNING: samplerate.h:     section \"Present But Cannot Be Compiled\"" >&2;}
-    { echo "$as_me:$LINENO: WARNING: samplerate.h: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: samplerate.h: proceeding with the preprocessor's result" >&2;}
-    { echo "$as_me:$LINENO: WARNING: samplerate.h: in the future, the compiler will take precedence" >&5
-echo "$as_me: WARNING: samplerate.h: in the future, the compiler will take precedence" >&2;}
-    (
-      cat <<\_ASBOX
-## ------------------------------------------ ##
-## Report this to the AC_PACKAGE_NAME lists.  ##
-## ------------------------------------------ ##
-_ASBOX
-    ) |
-      sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
-esac
-echo "$as_me:$LINENO: checking for samplerate.h" >&5
-echo $ECHO_N "checking for samplerate.h... $ECHO_C" >&6
-if test "${ac_cv_header_samplerate_h+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_cv_header_samplerate_h=$ac_header_preproc
-fi
-echo "$as_me:$LINENO: result: $ac_cv_header_samplerate_h" >&5
-echo "${ECHO_T}$ac_cv_header_samplerate_h" >&6
-
-fi
-if test $ac_cv_header_samplerate_h = yes; then
-  :
-else
-  have_libsamplerate=no
-fi
-
-
-
-if [ $have_libsamplerate = "yes" ] ; then
-	TARGETS="$TARGETS tests/compareresample"
-fi
-
-
-for ac_header in inttypes.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-else
-  # Is the header compilable?
-echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_header_compiler=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_header_compiler=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6
-
-# Is the header present?
-echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <$ac_header>
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
-  ac_header_preproc=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  ac_header_preproc=no
-fi
-rm -f conftest.err conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6
-
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-  yes:no: )
-    { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
-    ac_header_preproc=yes
-    ;;
-  no:yes:* )
-    { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header:     check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header:     check for missing prerequisite headers?" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&5
-echo "$as_me: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
-    (
-      cat <<\_ASBOX
-## ------------------------------------------ ##
-## Report this to the AC_PACKAGE_NAME lists.  ##
-## ------------------------------------------ ##
-_ASBOX
-    ) |
-      sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
-esac
-echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  eval "$as_ac_Header=\$ac_header_preproc"
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-
-fi
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
-  cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
-
-          ac_config_headers="$ac_config_headers src/config.h:src/configtemplate.h"
-
-          ac_config_files="$ac_config_files Makefile"
-cat >confcache <<\_ACEOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs, see configure's option --config-cache.
-# It is not useful on other systems.  If it contains results you don't
-# want to keep, you may remove or edit it.
-#
-# config.status only pays attention to the cache file if you give it
-# the --recheck option to rerun configure.
-#
-# `ac_cv_env_foo' variables (set or unset) will be overridden when
-# loading this file, other *unset* `ac_cv_foo' will be assigned the
-# following values.
-
-_ACEOF
-
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-{
-  (set) 2>&1 |
-    case `(ac_space=' '; set | grep ac_space) 2>&1` in
-    *ac_space=\ *)
-      # `set' does not quote correctly, so add quotes (double-quote
-      # substitution turns \\\\ into \\, and sed turns \\ into \).
-      sed -n \
-	"s/'/'\\\\''/g;
-	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
-      ;;
-    *)
-      # `set' quotes correctly as required by POSIX, so do not add quotes.
-      sed -n \
-	"s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
-      ;;
-    esac;
-} |
-  sed '
-     t clear
-     : clear
-     s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
-     t end
-     /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
-     : end' >>confcache
-if diff $cache_file confcache >/dev/null 2>&1; then :; else
-  if test -w $cache_file; then
-    test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
-    cat confcache >$cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# VPATH may cause trouble with some makes, so we remove $(srcdir),
-# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
-# trailing colons and then remove the whole line if VPATH becomes empty
-# (actually we leave an empty line to preserve line numbers).
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[	 ]*VPATH[	 ]*=/{
-s/:*\$(srcdir):*/:/;
-s/:*\${srcdir}:*/:/;
-s/:*@srcdir@:*/:/;
-s/^\([^=]*=[	 ]*\):*/\1/;
-s/:*$//;
-s/^[^=]*=[	 ]*$//;
-}'
-fi
-
-DEFS=-DHAVE_CONFIG_H
-
-ac_libobjs=
-ac_ltlibobjs=
-for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
-  # 1. Remove the extension, and $U if already installed.
-  ac_i=`echo "$ac_i" |
-	 sed 's/\$U\././;s/\.o$//;s/\.obj$//'`
-  # 2. Add them.
-  ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext"
-  ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo'
-done
-LIBOBJS=$ac_libobjs
-
-LTLIBOBJS=$ac_ltlibobjs
-
-
-
-: ${CONFIG_STATUS=./config.status}
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files $CONFIG_STATUS"
-{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
-echo "$as_me: creating $CONFIG_STATUS" >&6;}
-cat >$CONFIG_STATUS <<_ACEOF
-#! $SHELL
-# Generated by $as_me.
-# Run this file to recreate the current configuration.
-# Compiler output produced by configure, useful for debugging
-# configure, is in config.log if it exists.
-
-debug=false
-ac_cs_recheck=false
-ac_cs_silent=false
-SHELL=\${CONFIG_SHELL-$SHELL}
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-## --------------------- ##
-## M4sh Initialization.  ##
-## --------------------- ##
-
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-  emulate sh
-  NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '${1+"$@"}'='"$@"'
-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
-  set -o posix
-fi
-DUALCASE=1; export DUALCASE # for MKS sh
-
-# Support unset when possible.
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
-  as_unset=unset
-else
-  as_unset=false
-fi
-
-
-# Work around bugs in pre-3.0 UWIN ksh.
-$as_unset ENV MAIL MAILPATH
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-for as_var in \
-  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
-  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
-  LC_TELEPHONE LC_TIME
-do
-  if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
-    eval $as_var=C; export $as_var
-  else
-    $as_unset $as_var
-  fi
-done
-
-# Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1; then
-  as_expr=expr
-else
-  as_expr=false
-fi
-
-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
-  as_basename=basename
-else
-  as_basename=false
-fi
-
-
-# Name of the executable.
-as_me=`$as_basename "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
-	 X"$0" : 'X\(//\)$' \| \
-	 X"$0" : 'X\(/\)$' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X/"$0" |
-    sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
-  	  /^X\/\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\/\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-
-
-# PATH needs CR, and LINENO needs CR and PATH.
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
-  echo "#! /bin/sh" >conf$$.sh
-  echo  "exit 0"   >>conf$$.sh
-  chmod +x conf$$.sh
-  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-    PATH_SEPARATOR=';'
-  else
-    PATH_SEPARATOR=:
-  fi
-  rm -f conf$$.sh
-fi
-
-
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x$as_lineno_3"  = "x$as_lineno_2"  || {
-  # Find who we are.  Look in the path if we contain no path at all
-  # relative or not.
-  case $0 in
-    *[\\/]* ) as_myself=$0 ;;
-    *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
-
-       ;;
-  esac
-  # We did not find ourselves, most probably we were run as `sh COMMAND'
-  # in which case we are not to be found in the path.
-  if test "x$as_myself" = x; then
-    as_myself=$0
-  fi
-  if test ! -f "$as_myself"; then
-    { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
-echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
-   { (exit 1); exit 1; }; }
-  fi
-  case $CONFIG_SHELL in
-  '')
-    as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for as_base in sh bash ksh sh5; do
-	 case $as_dir in
-	 /*)
-	   if ("$as_dir/$as_base" -c '
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x$as_lineno_3"  = "x$as_lineno_2" ') 2>/dev/null; then
-	     $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
-	     $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
-	     CONFIG_SHELL=$as_dir/$as_base
-	     export CONFIG_SHELL
-	     exec "$CONFIG_SHELL" "$0" ${1+"$@"}
-	   fi;;
-	 esac
-       done
-done
-;;
-  esac
-
-  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
-  # uniformly replaced by the line number.  The first 'sed' inserts a
-  # line-number line before each line; the second 'sed' does the real
-  # work.  The second script uses 'N' to pair each line-number line
-  # with the numbered line, and appends trailing '-' during
-  # substitution so that $LINENO is not a special case at line end.
-  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
-  # second 'sed' script.  Blame Lee E. McMahon for sed's syntax.  :-)
-  sed '=' <$as_myself |
-    sed '
-      N
-      s,$,-,
-      : loop
-      s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
-      t loop
-      s,-$,,
-      s,^['$as_cr_digits']*\n,,
-    ' >$as_me.lineno &&
-  chmod +x $as_me.lineno ||
-    { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
-echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
-   { (exit 1); exit 1; }; }
-
-  # Don't try to exec as it changes $[0], causing all sort of problems
-  # (the dirname of $[0] is not the place where we might find the
-  # original and so on.  Autoconf is especially sensible to this).
-  . ./$as_me.lineno
-  # Exit status is that of the last command.
-  exit
-}
-
-
-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
-  *c*,-n*) ECHO_N= ECHO_C='
-' ECHO_T='	' ;;
-  *c*,*  ) ECHO_N=-n ECHO_C= ECHO_T= ;;
-  *)       ECHO_N= ECHO_C='\c' ECHO_T= ;;
-esac
-
-if expr a : '\(a\)' >/dev/null 2>&1; then
-  as_expr=expr
-else
-  as_expr=false
-fi
-
-rm -f conf$$ conf$$.exe conf$$.file
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
-  # We could just check for DJGPP; but this test a) works b) is more generic
-  # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
-  if test -f conf$$.exe; then
-    # Don't use ln at all; we don't have any links
-    as_ln_s='cp -p'
-  else
-    as_ln_s='ln -s'
-  fi
-elif ln conf$$.file conf$$ 2>/dev/null; then
-  as_ln_s=ln
-else
-  as_ln_s='cp -p'
-fi
-rm -f conf$$ conf$$.exe conf$$.file
-
-if mkdir -p . 2>/dev/null; then
-  as_mkdir_p=:
-else
-  test -d ./-p && rmdir ./-p
-  as_mkdir_p=false
-fi
-
-as_executable_p="test -f"
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-# IFS
-# We need space, tab and new line, in precisely that order.
-as_nl='
-'
-IFS=" 	$as_nl"
-
-# CDPATH.
-$as_unset CDPATH
-
-exec 6>&1
-
-# Open the log real soon, to keep \$[0] and so on meaningful, and to
-# report actual input values of CONFIG_FILES etc. instead of their
-# values after options handling.  Logging --version etc. is OK.
-exec 5>>config.log
-{
-  echo
-  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
-## Running $as_me. ##
-_ASBOX
-} >&5
-cat >&5 <<_CSEOF
-
-This file was extended by $as_me, which was
-generated by GNU Autoconf 2.59.  Invocation command line was
-
-  CONFIG_FILES    = $CONFIG_FILES
-  CONFIG_HEADERS  = $CONFIG_HEADERS
-  CONFIG_LINKS    = $CONFIG_LINKS
-  CONFIG_COMMANDS = $CONFIG_COMMANDS
-  $ $0 $@
-
-_CSEOF
-echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
-echo >&5
-_ACEOF
-
-# Files that config.status was made for.
-if test -n "$ac_config_files"; then
-  echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS
-fi
-
-if test -n "$ac_config_headers"; then
-  echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS
-fi
-
-if test -n "$ac_config_links"; then
-  echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS
-fi
-
-if test -n "$ac_config_commands"; then
-  echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS
-fi
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-
-ac_cs_usage="\
-\`$as_me' instantiates files from templates according to the
-current configuration.
-
-Usage: $0 [OPTIONS] [FILE]...
-
-  -h, --help       print this help, then exit
-  -V, --version    print version number, then exit
-  -q, --quiet      do not print progress messages
-  -d, --debug      don't remove temporary files
-      --recheck    update $as_me by reconfiguring in the same conditions
-  --file=FILE[:TEMPLATE]
-		   instantiate the configuration file FILE
-  --header=FILE[:TEMPLATE]
-		   instantiate the configuration header FILE
-
-Configuration files:
-$config_files
-
-Configuration headers:
-$config_headers
-
-Report bugs to <bug-autoconf@gnu.org>."
-_ACEOF
-
-cat >>$CONFIG_STATUS <<_ACEOF
-ac_cs_version="\\
-config.status
-configured by $0, generated by GNU Autoconf 2.59,
-  with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
-
-Copyright (C) 2003 Free Software Foundation, Inc.
-This config.status script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it."
-srcdir=$srcdir
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-# If no file are specified by the user, then we need to provide default
-# value.  By we need to know if files were specified by the user.
-ac_need_defaults=:
-while test $# != 0
-do
-  case $1 in
-  --*=*)
-    ac_option=`expr "x$1" : 'x\([^=]*\)='`
-    ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
-    ac_shift=:
-    ;;
-  -*)
-    ac_option=$1
-    ac_optarg=$2
-    ac_shift=shift
-    ;;
-  *) # This is not an option, so the user has probably given explicit
-     # arguments.
-     ac_option=$1
-     ac_need_defaults=false;;
-  esac
-
-  case $ac_option in
-  # Handling of the options.
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    ac_cs_recheck=: ;;
-  --version | --vers* | -V )
-    echo "$ac_cs_version"; exit 0 ;;
-  --he | --h)
-    # Conflict between --help and --header
-    { { echo "$as_me:$LINENO: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&5
-echo "$as_me: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&2;}
-   { (exit 1); exit 1; }; };;
-  --help | --hel | -h )
-    echo "$ac_cs_usage"; exit 0 ;;
-  --debug | --d* | -d )
-    debug=: ;;
-  --file | --fil | --fi | --f )
-    $ac_shift
-    CONFIG_FILES="$CONFIG_FILES $ac_optarg"
-    ac_need_defaults=false;;
-  --header | --heade | --head | --hea )
-    $ac_shift
-    CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
-    ac_need_defaults=false;;
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil | --si | --s)
-    ac_cs_silent=: ;;
-
-  # This is an error.
-  -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&5
-echo "$as_me: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&2;}
-   { (exit 1); exit 1; }; } ;;
-
-  *) ac_config_targets="$ac_config_targets $1" ;;
-
-  esac
-  shift
-done
-
-ac_configure_extra_args=
-
-if $ac_cs_silent; then
-  exec 6>/dev/null
-  ac_configure_extra_args="$ac_configure_extra_args --silent"
-fi
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
-if \$ac_cs_recheck; then
-  echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
-  exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
-fi
-
-_ACEOF
-
-
-
-
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-for ac_config_target in $ac_config_targets
-do
-  case "$ac_config_target" in
-  # Handling of arguments.
-  "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
-  "src/config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS src/config.h:src/configtemplate.h" ;;
-  *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
-echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
-   { (exit 1); exit 1; }; };;
-  esac
-done
-
-# If the user did not use the arguments to specify the items to instantiate,
-# then the envvar interface is used.  Set only those that are not.
-# We use the long form for the default assignment because of an extremely
-# bizarre bug on SunOS 4.1.3.
-if $ac_need_defaults; then
-  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
-  test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
-fi
-
-# Have a temporary directory for convenience.  Make it in the build tree
-# simply because there is no reason to put it here, and in addition,
-# creating and moving files from /tmp can sometimes cause problems.
-# Create a temporary directory, and hook for its removal unless debugging.
-$debug ||
-{
-  trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
-  trap '{ (exit 1); exit 1; }' 1 2 13 15
-}
-
-# Create a (secure) tmp directory for tmp files.
-
-{
-  tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
-  test -n "$tmp" && test -d "$tmp"
-}  ||
-{
-  tmp=./confstat$$-$RANDOM
-  (umask 077 && mkdir $tmp)
-} ||
-{
-   echo "$me: cannot create a temporary directory in ." >&2
-   { (exit 1); exit 1; }
-}
-
-_ACEOF
-
-cat >>$CONFIG_STATUS <<_ACEOF
-
-#
-# CONFIG_FILES section.
-#
-
-# No need to generate the scripts if there are no CONFIG_FILES.
-# This happens for instance when ./config.status config.h
-if test -n "\$CONFIG_FILES"; then
-  # Protect against being on the right side of a sed subst in config.status.
-  sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g;
-   s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF
-s,@SHELL@,$SHELL,;t t
-s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t
-s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t
-s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t
-s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t
-s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t
-s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t
-s,@exec_prefix@,$exec_prefix,;t t
-s,@prefix@,$prefix,;t t
-s,@program_transform_name@,$program_transform_name,;t t
-s,@bindir@,$bindir,;t t
-s,@sbindir@,$sbindir,;t t
-s,@libexecdir@,$libexecdir,;t t
-s,@datadir@,$datadir,;t t
-s,@sysconfdir@,$sysconfdir,;t t
-s,@sharedstatedir@,$sharedstatedir,;t t
-s,@localstatedir@,$localstatedir,;t t
-s,@libdir@,$libdir,;t t
-s,@includedir@,$includedir,;t t
-s,@oldincludedir@,$oldincludedir,;t t
-s,@infodir@,$infodir,;t t
-s,@mandir@,$mandir,;t t
-s,@build_alias@,$build_alias,;t t
-s,@host_alias@,$host_alias,;t t
-s,@target_alias@,$target_alias,;t t
-s,@DEFS@,$DEFS,;t t
-s,@ECHO_C@,$ECHO_C,;t t
-s,@ECHO_N@,$ECHO_N,;t t
-s,@ECHO_T@,$ECHO_T,;t t
-s,@LIBS@,$LIBS,;t t
-s,@CC@,$CC,;t t
-s,@CFLAGS@,$CFLAGS,;t t
-s,@LDFLAGS@,$LDFLAGS,;t t
-s,@CPPFLAGS@,$CPPFLAGS,;t t
-s,@ac_ct_CC@,$ac_ct_CC,;t t
-s,@EXEEXT@,$EXEEXT,;t t
-s,@OBJEXT@,$OBJEXT,;t t
-s,@RANLIB@,$RANLIB,;t t
-s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t
-s,@AR@,$AR,;t t
-s,@TARGETS@,$TARGETS,;t t
-s,@CPP@,$CPP,;t t
-s,@EGREP@,$EGREP,;t t
-s,@LIBOBJS@,$LIBOBJS,;t t
-s,@LTLIBOBJS@,$LTLIBOBJS,;t t
-CEOF
-
-_ACEOF
-
-  cat >>$CONFIG_STATUS <<\_ACEOF
-  # Split the substitutions into bite-sized pieces for seds with
-  # small command number limits, like on Digital OSF/1 and HP-UX.
-  ac_max_sed_lines=48
-  ac_sed_frag=1 # Number of current file.
-  ac_beg=1 # First line for current file.
-  ac_end=$ac_max_sed_lines # Line after last line for current file.
-  ac_more_lines=:
-  ac_sed_cmds=
-  while $ac_more_lines; do
-    if test $ac_beg -gt 1; then
-      sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
-    else
-      sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
-    fi
-    if test ! -s $tmp/subs.frag; then
-      ac_more_lines=false
-    else
-      # The purpose of the label and of the branching condition is to
-      # speed up the sed processing (if there are no `@' at all, there
-      # is no need to browse any of the substitutions).
-      # These are the two extra sed commands mentioned above.
-      (echo ':t
-  /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
-      if test -z "$ac_sed_cmds"; then
-	ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
-      else
-	ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
-      fi
-      ac_sed_frag=`expr $ac_sed_frag + 1`
-      ac_beg=$ac_end
-      ac_end=`expr $ac_end + $ac_max_sed_lines`
-    fi
-  done
-  if test -z "$ac_sed_cmds"; then
-    ac_sed_cmds=cat
-  fi
-fi # test -n "$CONFIG_FILES"
-
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case $ac_file in
-  - | *:- | *:-:* ) # input from stdin
-	cat >$tmp/stdin
-	ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-  *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-  * )   ac_file_in=$ac_file.in ;;
-  esac
-
-  # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
-  ac_dir=`(dirname "$ac_file") 2>/dev/null ||
-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$ac_file" : 'X\(//\)[^/]' \| \
-	 X"$ac_file" : 'X\(//\)$' \| \
-	 X"$ac_file" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X"$ac_file" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-  { if $as_mkdir_p; then
-    mkdir -p "$ac_dir"
-  else
-    as_dir="$ac_dir"
-    as_dirs=
-    while test ! -d "$as_dir"; do
-      as_dirs="$as_dir $as_dirs"
-      as_dir=`(dirname "$as_dir") 2>/dev/null ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$as_dir" : 'X\(//\)[^/]' \| \
-	 X"$as_dir" : 'X\(//\)$' \| \
-	 X"$as_dir" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-    done
-    test ! -n "$as_dirs" || mkdir $as_dirs
-  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
-   { (exit 1); exit 1; }; }; }
-
-  ac_builddir=.
-
-if test "$ac_dir" != .; then
-  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-  # A "../" for each directory in $ac_dir_suffix.
-  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
-  ac_dir_suffix= ac_top_builddir=
-fi
-
-case $srcdir in
-  .)  # No --srcdir option.  We are building in place.
-    ac_srcdir=.
-    if test -z "$ac_top_builddir"; then
-       ac_top_srcdir=.
-    else
-       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
-    fi ;;
-  [\\/]* | ?:[\\/]* )  # Absolute path.
-    ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir ;;
-  *) # Relative path.
-    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_builddir$srcdir ;;
-esac
-
-# Do not use `cd foo && pwd` to compute absolute paths, because
-# the directories may not exist.
-case `pwd` in
-.) ac_abs_builddir="$ac_dir";;
-*)
-  case "$ac_dir" in
-  .) ac_abs_builddir=`pwd`;;
-  [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
-  *) ac_abs_builddir=`pwd`/"$ac_dir";;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_builddir=${ac_top_builddir}.;;
-*)
-  case ${ac_top_builddir}. in
-  .) ac_abs_top_builddir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
-  *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_srcdir=$ac_srcdir;;
-*)
-  case $ac_srcdir in
-  .) ac_abs_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
-  *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_srcdir=$ac_top_srcdir;;
-*)
-  case $ac_top_srcdir in
-  .) ac_abs_top_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
-  *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
-  esac;;
-esac
-
-
-
-  # Let's still pretend it is `configure' which instantiates (i.e., don't
-  # use $as_me), people would be surprised to read:
-  #    /* config.h.  Generated by config.status.  */
-  if test x"$ac_file" = x-; then
-    configure_input=
-  else
-    configure_input="$ac_file.  "
-  fi
-  configure_input=$configure_input"Generated from `echo $ac_file_in |
-				     sed 's,.*/,,'` by configure."
-
-  # First look for the input files in the build tree, otherwise in the
-  # src tree.
-  ac_file_inputs=`IFS=:
-    for f in $ac_file_in; do
-      case $f in
-      -) echo $tmp/stdin ;;
-      [\\/$]*)
-	 # Absolute (can't be DOS-style, as IFS=:)
-	 test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
-   { (exit 1); exit 1; }; }
-	 echo "$f";;
-      *) # Relative
-	 if test -f "$f"; then
-	   # Build tree
-	   echo "$f"
-	 elif test -f "$srcdir/$f"; then
-	   # Source tree
-	   echo "$srcdir/$f"
-	 else
-	   # /dev/null tree
-	   { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
-   { (exit 1); exit 1; }; }
-	 fi;;
-      esac
-    done` || { (exit 1); exit 1; }
-
-  if test x"$ac_file" != x-; then
-    { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
-    rm -f "$ac_file"
-  fi
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
-  sed "$ac_vpsub
-$extrasub
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-:t
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-s,@configure_input@,$configure_input,;t t
-s,@srcdir@,$ac_srcdir,;t t
-s,@abs_srcdir@,$ac_abs_srcdir,;t t
-s,@top_srcdir@,$ac_top_srcdir,;t t
-s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t
-s,@builddir@,$ac_builddir,;t t
-s,@abs_builddir@,$ac_abs_builddir,;t t
-s,@top_builddir@,$ac_top_builddir,;t t
-s,@abs_top_builddir@,$ac_abs_top_builddir,;t t
-" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
-  rm -f $tmp/stdin
-  if test x"$ac_file" != x-; then
-    mv $tmp/out $ac_file
-  else
-    cat $tmp/out
-    rm -f $tmp/out
-  fi
-
-done
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-
-#
-# CONFIG_HEADER section.
-#
-
-# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
-# NAME is the cpp macro being defined and VALUE is the value it is being given.
-#
-# ac_d sets the value in "#define NAME VALUE" lines.
-ac_dA='s,^\([	 ]*\)#\([	 ]*define[	 ][	 ]*\)'
-ac_dB='[	 ].*$,\1#\2'
-ac_dC=' '
-ac_dD=',;t'
-# ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
-ac_uA='s,^\([	 ]*\)#\([	 ]*\)undef\([	 ][	 ]*\)'
-ac_uB='$,\1#\2define\3'
-ac_uC=' '
-ac_uD=',;t'
-
-for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case $ac_file in
-  - | *:- | *:-:* ) # input from stdin
-	cat >$tmp/stdin
-	ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-  *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-  * )   ac_file_in=$ac_file.in ;;
-  esac
-
-  test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
-
-  # First look for the input files in the build tree, otherwise in the
-  # src tree.
-  ac_file_inputs=`IFS=:
-    for f in $ac_file_in; do
-      case $f in
-      -) echo $tmp/stdin ;;
-      [\\/$]*)
-	 # Absolute (can't be DOS-style, as IFS=:)
-	 test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
-   { (exit 1); exit 1; }; }
-	 # Do quote $f, to prevent DOS paths from being IFS'd.
-	 echo "$f";;
-      *) # Relative
-	 if test -f "$f"; then
-	   # Build tree
-	   echo "$f"
-	 elif test -f "$srcdir/$f"; then
-	   # Source tree
-	   echo "$srcdir/$f"
-	 else
-	   # /dev/null tree
-	   { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
-   { (exit 1); exit 1; }; }
-	 fi;;
-      esac
-    done` || { (exit 1); exit 1; }
-  # Remove the trailing spaces.
-  sed 's/[	 ]*$//' $ac_file_inputs >$tmp/in
-
-_ACEOF
-
-# Transform confdefs.h into two sed scripts, `conftest.defines' and
-# `conftest.undefs', that substitutes the proper values into
-# config.h.in to produce config.h.  The first handles `#define'
-# templates, and the second `#undef' templates.
-# And first: Protect against being on the right side of a sed subst in
-# config.status.  Protect against being in an unquoted here document
-# in config.status.
-rm -f conftest.defines conftest.undefs
-# Using a here document instead of a string reduces the quoting nightmare.
-# Putting comments in sed scripts is not portable.
-#
-# `end' is used to avoid that the second main sed command (meant for
-# 0-ary CPP macros) applies to n-ary macro definitions.
-# See the Autoconf documentation for `clear'.
-cat >confdef2sed.sed <<\_ACEOF
-s/[\\&,]/\\&/g
-s,[\\$`],\\&,g
-t clear
-: clear
-s,^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 (][^	 (]*\)\(([^)]*)\)[	 ]*\(.*\)$,${ac_dA}\1${ac_dB}\1\2${ac_dC}\3${ac_dD},gp
-t end
-s,^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 ][^	 ]*\)[	 ]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp
-: end
-_ACEOF
-# If some macros were called several times there might be several times
-# the same #defines, which is useless.  Nevertheless, we may not want to
-# sort them, since we want the *last* AC-DEFINE to be honored.
-uniq confdefs.h | sed -n -f confdef2sed.sed >conftest.defines
-sed 's/ac_d/ac_u/g' conftest.defines >conftest.undefs
-rm -f confdef2sed.sed
-
-# This sed command replaces #undef with comments.  This is necessary, for
-# example, in the case of _POSIX_SOURCE, which is predefined and required
-# on some systems where configure will not decide to define it.
-cat >>conftest.undefs <<\_ACEOF
-s,^[	 ]*#[	 ]*undef[	 ][	 ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */,
-_ACEOF
-
-# Break up conftest.defines because some shells have a limit on the size
-# of here documents, and old seds have small limits too (100 cmds).
-echo '  # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS
-echo '  if grep "^[	 ]*#[	 ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS
-echo '  # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS
-echo '  :' >>$CONFIG_STATUS
-rm -f conftest.tail
-while grep . conftest.defines >/dev/null
-do
-  # Write a limited-size here document to $tmp/defines.sed.
-  echo '  cat >$tmp/defines.sed <<CEOF' >>$CONFIG_STATUS
-  # Speed up: don't consider the non `#define' lines.
-  echo '/^[	 ]*#[	 ]*define/!b' >>$CONFIG_STATUS
-  # Work around the forget-to-reset-the-flag bug.
-  echo 't clr' >>$CONFIG_STATUS
-  echo ': clr' >>$CONFIG_STATUS
-  sed ${ac_max_here_lines}q conftest.defines >>$CONFIG_STATUS
-  echo 'CEOF
-  sed -f $tmp/defines.sed $tmp/in >$tmp/out
-  rm -f $tmp/in
-  mv $tmp/out $tmp/in
-' >>$CONFIG_STATUS
-  sed 1,${ac_max_here_lines}d conftest.defines >conftest.tail
-  rm -f conftest.defines
-  mv conftest.tail conftest.defines
-done
-rm -f conftest.defines
-echo '  fi # grep' >>$CONFIG_STATUS
-echo >>$CONFIG_STATUS
-
-# Break up conftest.undefs because some shells have a limit on the size
-# of here documents, and old seds have small limits too (100 cmds).
-echo '  # Handle all the #undef templates' >>$CONFIG_STATUS
-rm -f conftest.tail
-while grep . conftest.undefs >/dev/null
-do
-  # Write a limited-size here document to $tmp/undefs.sed.
-  echo '  cat >$tmp/undefs.sed <<CEOF' >>$CONFIG_STATUS
-  # Speed up: don't consider the non `#undef'
-  echo '/^[	 ]*#[	 ]*undef/!b' >>$CONFIG_STATUS
-  # Work around the forget-to-reset-the-flag bug.
-  echo 't clr' >>$CONFIG_STATUS
-  echo ': clr' >>$CONFIG_STATUS
-  sed ${ac_max_here_lines}q conftest.undefs >>$CONFIG_STATUS
-  echo 'CEOF
-  sed -f $tmp/undefs.sed $tmp/in >$tmp/out
-  rm -f $tmp/in
-  mv $tmp/out $tmp/in
-' >>$CONFIG_STATUS
-  sed 1,${ac_max_here_lines}d conftest.undefs >conftest.tail
-  rm -f conftest.undefs
-  mv conftest.tail conftest.undefs
-done
-rm -f conftest.undefs
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-  # Let's still pretend it is `configure' which instantiates (i.e., don't
-  # use $as_me), people would be surprised to read:
-  #    /* config.h.  Generated by config.status.  */
-  if test x"$ac_file" = x-; then
-    echo "/* Generated by configure.  */" >$tmp/config.h
-  else
-    echo "/* $ac_file.  Generated by configure.  */" >$tmp/config.h
-  fi
-  cat $tmp/in >>$tmp/config.h
-  rm -f $tmp/in
-  if test x"$ac_file" != x-; then
-    if diff $ac_file $tmp/config.h >/dev/null 2>&1; then
-      { echo "$as_me:$LINENO: $ac_file is unchanged" >&5
-echo "$as_me: $ac_file is unchanged" >&6;}
-    else
-      ac_dir=`(dirname "$ac_file") 2>/dev/null ||
-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$ac_file" : 'X\(//\)[^/]' \| \
-	 X"$ac_file" : 'X\(//\)$' \| \
-	 X"$ac_file" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X"$ac_file" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-      { if $as_mkdir_p; then
-    mkdir -p "$ac_dir"
-  else
-    as_dir="$ac_dir"
-    as_dirs=
-    while test ! -d "$as_dir"; do
-      as_dirs="$as_dir $as_dirs"
-      as_dir=`(dirname "$as_dir") 2>/dev/null ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$as_dir" : 'X\(//\)[^/]' \| \
-	 X"$as_dir" : 'X\(//\)$' \| \
-	 X"$as_dir" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-    done
-    test ! -n "$as_dirs" || mkdir $as_dirs
-  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
-   { (exit 1); exit 1; }; }; }
-
-      rm -f $ac_file
-      mv $tmp/config.h $ac_file
-    fi
-  else
-    cat $tmp/config.h
-    rm -f $tmp/config.h
-  fi
-done
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-
-{ (exit 0); exit 0; }
-_ACEOF
-chmod +x $CONFIG_STATUS
-ac_clean_files=$ac_clean_files_save
-
-
-# configure is writing to config.log, and then calls config.status.
-# config.status does its own redirection, appending to config.log.
-# Unfortunately, on DOS this fails, as config.log is still kept open
-# by configure, so config.status won't be able to write to it; its
-# output is simply discarded.  So we exec the FD to /dev/null,
-# effectively closing config.log, so it can be properly (re)opened and
-# appended to by config.status.  When coming back to configure, we
-# need to make the FD available again.
-if test "$no_create" != yes; then
-  ac_cs_success=:
-  ac_config_status_args=
-  test "$silent" = yes &&
-    ac_config_status_args="$ac_config_status_args --quiet"
-  exec 5>/dev/null
-  $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
-  exec 5>>config.log
-  # Use ||, not &&, to avoid exiting from the if with $? = 1, which
-  # would make configure fail if this is the last instruction.
-  $ac_cs_success || { (exit 1); exit 1; }
-fi
-
-
-echo ""
-
-if [ $have_libsamplerate = "yes" ] ; then
-	echo "Configured to build tests/resample-sndfile using libsndfile"
-	echo ""
-else
-	echo "Could not find libsndfile - needed if you want to"
-	echo "compile tests/resample-sndfile"
-	echo ""
-fi
-
-if [ $have_libsamplerate = "yes" ] ; then
-	echo "Configured to build tests/compareresample to compare against"
-   echo "Erik de Castro Lopo's libsamplerate library."
-	echo ""
-else
-	echo "Could not find libsamplerate - only needed if you want to"
-	echo "compile tests/compareresample to compare their performance."
-	echo ""
-fi
-
-echo "Type 'configure --help' to see options."
-echo ""
-echo "Type 'make' to build libresample and tests."
diff --git a/main/libresample/configure.in b/main/libresample/configure.in
deleted file mode 100644
index e676b69f2..000000000
--- a/main/libresample/configure.in
+++ /dev/null
@@ -1,68 +0,0 @@
-dnl
-dnl libresample configure.in script
-dnl
-dnl Dominic Mazzoni
-dnl
-
-dnl Require autoconf >= 2.13
-AC_PREREQ(2.13)
-
-dnl Init autoconf and make sure configure is being called
-dnl from the right directory
-AC_INIT([src/resample.c])
-
-dnl Checks for programs.
-AC_PROG_CC
-AC_PROG_RANLIB
-
-AC_PATH_PROG(AR, ar, no)
-if [[ $AR = "no" ]] ; then
-    AC_MSG_ERROR("Could not find ar - needed to create a library");
-fi
-
-AC_SUBST(TARGETS)
-TARGETS="libresample.a tests/testresample"
-
-AC_CHECK_LIB(sndfile, sf_open, have_libsndfile=yes, have_libsndfile=no)
-AC_CHECK_HEADER(sndfile.h, , have_libsndfile=no)
-
-if [[ $have_libsndfile = "yes" ]] ; then
-	TARGETS="$TARGETS tests/resample-sndfile"
-fi
-
-AC_CHECK_LIB(samplerate, src_simple, have_libsamplerate=yes, have_libsamplerate=no)
-AC_CHECK_HEADER(samplerate.h, , have_libsamplerate=no)
-
-if [[ $have_libsamplerate = "yes" ]] ; then
-	TARGETS="$TARGETS tests/compareresample"
-fi
-
-AC_CHECK_HEADERS(inttypes.h)
-
-AC_CONFIG_HEADER(src/config.h:src/configtemplate.h)
-AC_OUTPUT([Makefile])
-
-echo ""
-
-if [[ $have_libsamplerate = "yes" ]] ; then
-	echo "Configured to build tests/resample-sndfile using libsndfile"
-	echo ""
-else
-	echo "Could not find libsndfile - needed if you want to"
-	echo "compile tests/resample-sndfile"
-	echo ""
-fi
-
-if [[ $have_libsamplerate = "yes" ]] ; then
-	echo "Configured to build tests/compareresample to compare against"
-   echo "Erik de Castro Lopo's libsamplerate library."
-	echo ""
-else
-	echo "Could not find libsamplerate - only needed if you want to"
-	echo "compile tests/compareresample to compare their performance."
-	echo ""
-fi
-
-echo "Type 'configure --help' to see options."
-echo ""
-echo "Type 'make' to build libresample and tests."
diff --git a/main/libresample/include/libresample.h b/main/libresample/include/libresample.h
deleted file mode 100644
index 43ccab56e..000000000
--- a/main/libresample/include/libresample.h
+++ /dev/null
@@ -1,120 +0,0 @@
-/**********************************************************************
-
-  resample.h
-
-  Real-time library interface by Dominic Mazzoni
-
-  Based on resample-1.7:
-    http://www-ccrma.stanford.edu/~jos/resample/
-
-  License: LGPL - see the file LICENSE.txt for more information
-
-**********************************************************************/
-
-/*!
- * \file
- * \brief libresample API
- * \author Dominic Mazzoni
- */
-
-#ifndef LIBRESAMPLE_INCLUDED
-#define LIBRESAMPLE_INCLUDED
-
-#ifdef __cplusplus
-extern "C" {
-#endif	/* __cplusplus */
-
-/*!
- * \brief Create a resampler
- *
- * \param highQuality Set this argument to non-zero to enable higher quality
- *      resampling.  
- * \param minFactor This is the minimum resampling factor that will be used for
- *      this resampler.  The resampling factor is calculated in the following
- *      way: ( from sample rate / to sample rate ).
- * \param maxFactor This is the maximum resampling factor that will be used for
- *      this resampler.
- *
- * Use this function to create a new resampler that will maintain state
- * information about the stream of audio being resampled.
- *
- * \return A handle to a new resampler
- */
-void *resample_open(int      highQuality,
-                    double   minFactor,
-                    double   maxFactor);
-
-/*!
- * \brief Duplicate a resampler
- *
- * \param handle the resampler to duplicate
- *
- * \return A new handle to a resampler, initialized with the same parameters
- * used to create the original resampler.
- */
-void *resample_dup(const void *handle);
-
-/*!
- * \brief Get filter width for resampler
- * 
- * \param handle the resampler
- *
- * \return the filter width.
- */
-int resample_get_filter_width(const void *handle);
-
-/*!
- * \brief Resample a chunk of audio
- *
- * \param handle the resampler
- * \param factor the resampling factor.  This factor should be calculated as
- *      ( from sample rate / to sample rate ).  So, for converting from 8 kHz
- *      to 16 kHz, this value would be 2.0.
- * \param inBuffer the input buffer for audio to resample.
- * \param inBufferLen the number of samples in the input buffer
- * \param lastFlag Set this argument to non-zero if the data in the input buffer
- *      is known to be the end of a stream.  This would be used if you're
- *      resampling a file, for example.
- * \param inBufferUsed This is an output parameter that indicates how many
- *      samples were consumed from the input buffer.  Generally, this function
- *      is called in a loop until you know that the entire input buffer has
- *      been consumed, as it may take multiple calls to complete.
- * \param outBuffer This is the output buffer.  This function will write the
- *      resampled audio into this buffer.
- * \param outBufferLen This parameter specifies how many samples there is room
- *      for in the output buffer.
- *
- * This is the main function used for resampling audio.  It should be called
- * in a loop until all of the data from the input buffer is consumed, or the
- * output buffer has been filled.
- *
- * \return the number of samples written to the output buffer.  If the return
- *         value is equal to the value provided in the outBufferLen parameter,
- *         then the output buffer has been filled.
- */
-int resample_process(void   *handle,
-                     double  factor,
-                     float  *inBuffer,
-                     int     inBufferLen,
-                     int     lastFlag,
-                     int    *inBufferUsed,
-                     float  *outBuffer,
-                     int     outBufferLen);
-
-/*!
- * \brief Close a resampler
- *
- * \param handle the resampler to close
- * 
- * Use this function to release a handle to a resampler that was created using
- * either resample_open() or resample_dup().
- *
- * \return nothing.
- */
-void resample_close(void *handle);
-
-#ifdef __cplusplus
-}		/* extern "C" */
-#endif	/* __cplusplus */
-
-#endif /* LIBRESAMPLE_INCLUDED */
diff --git a/main/libresample/install-sh b/main/libresample/install-sh
deleted file mode 100755
index e9de23842..000000000
--- a/main/libresample/install-sh
+++ /dev/null
@@ -1,251 +0,0 @@
-#!/bin/sh
-#
-# install - install a program, script, or datafile
-# This comes from X11R5 (mit/util/scripts/install.sh).
-#
-# Copyright 1991 by the Massachusetts Institute of Technology
-#
-# Permission to use, copy, modify, distribute, and sell this software and its
-# documentation for any purpose is hereby granted without fee, provided that
-# the above copyright notice appear in all copies and that both that
-# copyright notice and this permission notice appear in supporting
-# documentation, and that the name of M.I.T. not be used in advertising or
-# publicity pertaining to distribution of the software without specific,
-# written prior permission.  M.I.T. makes no representations about the
-# suitability of this software for any purpose.  It is provided "as is"
-# without express or implied warranty.
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch.  It can only install one file at a time, a restriction
-# shared with many OS's install programs.
-
-
-# set DOITPROG to echo to test this script
-
-# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
-
-
-# put in absolute paths if you don't have them in your path; or use env. vars.
-
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
-
-transformbasename=""
-transform_arg=""
-instcmd="$mvprog"
-chmodcmd="$chmodprog 0755"
-chowncmd=""
-chgrpcmd=""
-stripcmd=""
-rmcmd="$rmprog -f"
-mvcmd="$mvprog"
-src=""
-dst=""
-dir_arg=""
-
-while [ x"$1" != x ]; do
-    case $1 in
-	-c) instcmd="$cpprog"
-	    shift
-	    continue;;
-
-	-d) dir_arg=true
-	    shift
-	    continue;;
-
-	-m) chmodcmd="$chmodprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-o) chowncmd="$chownprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-g) chgrpcmd="$chgrpprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-s) stripcmd="$stripprog"
-	    shift
-	    continue;;
-
-	-t=*) transformarg=`echo $1 | sed 's/-t=//'`
-	    shift
-	    continue;;
-
-	-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
-	    shift
-	    continue;;
-
-	*)  if [ x"$src" = x ]
-	    then
-		src=$1
-	    else
-		# this colon is to work around a 386BSD /bin/sh bug
-		:
-		dst=$1
-	    fi
-	    shift
-	    continue;;
-    esac
-done
-
-if [ x"$src" = x ]
-then
-	echo "install:	no input file specified"
-	exit 1
-else
-	true
-fi
-
-if [ x"$dir_arg" != x ]; then
-	dst=$src
-	src=""
-	
-	if [ -d $dst ]; then
-		instcmd=:
-		chmodcmd=""
-	else
-		instcmd=mkdir
-	fi
-else
-
-# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
-# might cause directories to be created, which would be especially bad 
-# if $src (and thus $dsttmp) contains '*'.
-
-	if [ -f $src -o -d $src ]
-	then
-		true
-	else
-		echo "install:  $src does not exist"
-		exit 1
-	fi
-	
-	if [ x"$dst" = x ]
-	then
-		echo "install:	no destination specified"
-		exit 1
-	else
-		true
-	fi
-
-# If destination is a directory, append the input filename; if your system
-# does not like double slashes in filenames, you may need to add some logic
-
-	if [ -d $dst ]
-	then
-		dst="$dst"/`basename $src`
-	else
-		true
-	fi
-fi
-
-## this sed command emulates the dirname command
-dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
-
-# Make sure that the destination directory exists.
-#  this part is taken from Noah Friedman's mkinstalldirs script
-
-# Skip lots of stat calls in the usual case.
-if [ ! -d "$dstdir" ]; then
-defaultIFS='	
-'
-IFS="${IFS-${defaultIFS}}"
-
-oIFS="${IFS}"
-# Some sh's can't handle IFS=/ for some reason.
-IFS='%'
-set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
-IFS="${oIFS}"
-
-pathcomp=''
-
-while [ $# -ne 0 ] ; do
-	pathcomp="${pathcomp}${1}"
-	shift
-
-	if [ ! -d "${pathcomp}" ] ;
-        then
-		$mkdirprog "${pathcomp}"
-	else
-		true
-	fi
-
-	pathcomp="${pathcomp}/"
-done
-fi
-
-if [ x"$dir_arg" != x ]
-then
-	$doit $instcmd $dst &&
-
-	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
-	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
-	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
-	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
-else
-
-# If we're going to rename the final executable, determine the name now.
-
-	if [ x"$transformarg" = x ] 
-	then
-		dstfile=`basename $dst`
-	else
-		dstfile=`basename $dst $transformbasename | 
-			sed $transformarg`$transformbasename
-	fi
-
-# don't allow the sed command to completely eliminate the filename
-
-	if [ x"$dstfile" = x ] 
-	then
-		dstfile=`basename $dst`
-	else
-		true
-	fi
-
-# Make a temp file name in the proper directory.
-
-	dsttmp=$dstdir/#inst.$$#
-
-# Move or copy the file name to the temp name
-
-	$doit $instcmd $src $dsttmp &&
-
-	trap "rm -f ${dsttmp}" 0 &&
-
-# and set any options; do chmod last to preserve setuid bits
-
-# If any of these fail, we abort the whole thing.  If we want to
-# ignore errors from any of these, just make sure not to ignore
-# errors from the above "$doit $instcmd $src $dsttmp" command.
-
-	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
-	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
-	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
-	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
-
-# Now rename the file to the real destination.
-
-	$doit $rmcmd -f $dstdir/$dstfile &&
-	$doit $mvcmd $dsttmp $dstdir/$dstfile 
-
-fi &&
-
-
-exit 0
diff --git a/main/libresample/src/configtemplate.h b/main/libresample/src/configtemplate.h
deleted file mode 100644
index 94ae1cea9..000000000
--- a/main/libresample/src/configtemplate.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/* Run configure to generate config.h automatically on any
-   system supported by GNU autoconf.  For all other systems,
-   use this file as a template to create config.h
-*/
-
-#undef HAVE_INTTYPES_H
-
diff --git a/main/libresample/src/filterkit.c b/main/libresample/src/filterkit.c
deleted file mode 100644
index bc92285f2..000000000
--- a/main/libresample/src/filterkit.c
+++ /dev/null
@@ -1,215 +0,0 @@
-/**********************************************************************
-
-  resamplesubs.c
-
-  Real-time library interface by Dominic Mazzoni
-
-  Based on resample-1.7:
-    http://www-ccrma.stanford.edu/~jos/resample/
-
-  License: LGPL - see the file LICENSE.txt for more information
-
-  This file provides Kaiser-windowed low-pass filter support,
-  including a function to create the filter coefficients, and
-  two functions to apply the filter at a particular point.
-
-**********************************************************************/
-
-/* Definitions */
-#include "resample_defs.h"
-
-#include "filterkit.h"
-
-#include <stdlib.h>
-#include <string.h>
-#include <stdio.h>
-#include <math.h>
-
-/* LpFilter()
- *
- * reference: "Digital Filters, 2nd edition"
- *            R.W. Hamming, pp. 178-179
- *
- * Izero() computes the 0th order modified bessel function of the first kind.
- *    (Needed to compute Kaiser window).
- *
- * LpFilter() computes the coeffs of a Kaiser-windowed low pass filter with
- *    the following characteristics:
- *
- *       c[]  = array in which to store computed coeffs
- *       frq  = roll-off frequency of filter
- *       N    = Half the window length in number of coeffs
- *       Beta = parameter of Kaiser window
- *       Num  = number of coeffs before 1/frq
- *
- * Beta trades the rejection of the lowpass filter against the transition
- *    width from passband to stopband.  Larger Beta means a slower
- *    transition and greater stopband rejection.  See Rabiner and Gold
- *    (Theory and Application of DSP) under Kaiser windows for more about
- *    Beta.  The following table from Rabiner and Gold gives some feel
- *    for the effect of Beta:
- *
- * All ripples in dB, width of transition band = D*N where N = window length
- *
- *               BETA    D       PB RIP   SB RIP
- *               2.120   1.50  +-0.27      -30
- *               3.384   2.23    0.0864    -40
- *               4.538   2.93    0.0274    -50
- *               5.658   3.62    0.00868   -60
- *               6.764   4.32    0.00275   -70
- *               7.865   5.0     0.000868  -80
- *               8.960   5.7     0.000275  -90
- *               10.056  6.4     0.000087  -100
- */
-
-#define IzeroEPSILON 1E-21               /* Max error acceptable in Izero */
-
-static double Izero(double x)
-{
-   double sum, u, halfx, temp;
-   int n;
-
-   sum = u = n = 1;
-   halfx = x/2.0;
-   do {
-      temp = halfx/(double)n;
-      n += 1;
-      temp *= temp;
-      u *= temp;
-      sum += u;
-   } while (u >= IzeroEPSILON*sum);
-   return(sum);
-}
-
-void lrsLpFilter(double c[], int N, double frq, double Beta, int Num)
-{
-   double IBeta, temp, temp1, inm1;
-   int i;
-
-   /* Calculate ideal lowpass filter impulse response coefficients: */
-   c[0] = 2.0*frq;
-   for (i=1; i<N; i++) {
-      temp = PI*(double)i/(double)Num;
-      c[i] = sin(2.0*temp*frq)/temp; /* Analog sinc function, cutoff = frq */
-   }
-
-   /* 
-    * Calculate and Apply Kaiser window to ideal lowpass filter.
-    * Note: last window value is IBeta which is NOT zero.
-    * You're supposed to really truncate the window here, not ramp
-    * it to zero. This helps reduce the first sidelobe. 
-    */
-   IBeta = 1.0/Izero(Beta);
-   inm1 = 1.0/((double)(N-1));
-   for (i=1; i<N; i++) {
-      temp = (double)i * inm1;
-      temp1 = 1.0 - temp*temp;
-      temp1 = (temp1<0? 0: temp1); /* make sure it's not negative since
-                                      we're taking the square root - this
-                                      happens on Pentium 4's due to tiny
-                                      roundoff errors */
-      c[i] *= Izero(Beta*sqrt(temp1)) * IBeta;
-   }
-}
-
-float lrsFilterUp(float Imp[],  /* impulse response */
-                  float ImpD[], /* impulse response deltas */
-                  UWORD Nwing,  /* len of one wing of filter */
-                  BOOL Interp,  /* Interpolate coefs using deltas? */
-                  float *Xp,    /* Current sample */
-                  double Ph,    /* Phase */
-                  int Inc)    /* increment (1 for right wing or -1 for left) */
-{
-   float *Hp, *Hdp = NULL, *End;
-   double a = 0;
-   float v, t;
-
-   Ph *= Npc; /* Npc is number of values per 1/delta in impulse response */
-   
-   v = 0.0; /* The output value */
-   Hp = &Imp[(int)Ph];
-   End = &Imp[Nwing];
-   if (Interp) {
-      Hdp = &ImpD[(int)Ph];
-      a = Ph - floor(Ph); /* fractional part of Phase */
-   }
-
-   if (Inc == 1)		/* If doing right wing...              */
-   {				      /* ...drop extra coeff, so when Ph is  */
-      End--;			/*    0.5, we don't do too many mult's */
-      if (Ph == 0)		/* If the phase is zero...           */
-      {			         /* ...then we've already skipped the */
-         Hp += Npc;		/*    first sample, so we must also  */
-         Hdp += Npc;		/*    skip ahead in Imp[] and ImpD[] */
-      }
-   }
-
-   if (Interp)
-      while (Hp < End) {
-         t = *Hp;		/* Get filter coeff */
-         t += (*Hdp)*a; /* t is now interp'd filter coeff */
-         Hdp += Npc;		/* Filter coeff differences step */
-         t *= *Xp;		/* Mult coeff by input sample */
-         v += t;			/* The filter output */
-         Hp += Npc;		/* Filter coeff step */
-         Xp += Inc;		/* Input signal step. NO CHECK ON BOUNDS */
-      } 
-   else 
-      while (Hp < End) {
-         t = *Hp;		/* Get filter coeff */
-         t *= *Xp;		/* Mult coeff by input sample */
-         v += t;			/* The filter output */
-         Hp += Npc;		/* Filter coeff step */
-         Xp += Inc;		/* Input signal step. NO CHECK ON BOUNDS */
-      }
-   
-   return v;
-}
-
-float lrsFilterUD(float Imp[],  /* impulse response */
-                  float ImpD[], /* impulse response deltas */
-                  UWORD Nwing,  /* len of one wing of filter */
-                  BOOL Interp,  /* Interpolate coefs using deltas? */
-                  float *Xp,    /* Current sample */
-                  double Ph,    /* Phase */
-                  int Inc,    /* increment (1 for right wing or -1 for left) */
-                  double dhb) /* filter sampling period */
-{
-   float a;
-   float *Hp, *Hdp, *End;
-   float v, t;
-   double Ho;
-    
-   v = 0.0; /* The output value */
-   Ho = Ph*dhb;
-   End = &Imp[Nwing];
-   if (Inc == 1)		/* If doing right wing...              */
-   {				      /* ...drop extra coeff, so when Ph is  */
-      End--;			/*    0.5, we don't do too many mult's */
-      if (Ph == 0)		/* If the phase is zero...           */
-         Ho += dhb;		/* ...then we've already skipped the */
-   }				         /*    first sample, so we must also  */
-                        /*    skip ahead in Imp[] and ImpD[] */
-
-   if (Interp)
-      while ((Hp = &Imp[(int)Ho]) < End) {
-         t = *Hp;		/* Get IR sample */
-         Hdp = &ImpD[(int)Ho];  /* get interp bits from diff table*/
-         a = Ho - floor(Ho);	  /* a is logically between 0 and 1 */
-         t += (*Hdp)*a; /* t is now interp'd filter coeff */
-         t *= *Xp;		/* Mult coeff by input sample */
-         v += t;			/* The filter output */
-         Ho += dhb;		/* IR step */
-         Xp += Inc;		/* Input signal step. NO CHECK ON BOUNDS */
-      }
-   else 
-      while ((Hp = &Imp[(int)Ho]) < End) {
-         t = *Hp;		/* Get IR sample */
-         t *= *Xp;		/* Mult coeff by input sample */
-         v += t;			/* The filter output */
-         Ho += dhb;		/* IR step */
-         Xp += Inc;		/* Input signal step. NO CHECK ON BOUNDS */
-      }
-
-   return v;
-}
diff --git a/main/libresample/src/filterkit.h b/main/libresample/src/filterkit.h
deleted file mode 100644
index 9df0ae869..000000000
--- a/main/libresample/src/filterkit.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/**********************************************************************
-
-  resamplesubs.c
-
-  Real-time library interface by Dominic Mazzoni
-
-  Based on resample-1.7:
-    http://www-ccrma.stanford.edu/~jos/resample/
-
-  License: LGPL - see the file LICENSE.txt for more information
-
-**********************************************************************/
-
-/* Definitions */
-#include "resample_defs.h"
-
-/*
- * FilterUp() - Applies a filter to a given sample when up-converting.
- * FilterUD() - Applies a filter to a given sample when up- or down-
- */
-
-float lrsFilterUp(float Imp[], float ImpD[], UWORD Nwing, BOOL Interp,
-                  float *Xp, double Ph, int Inc);
-
-float lrsFilterUD(float Imp[], float ImpD[], UWORD Nwing, BOOL Interp,
-                  float *Xp, double Ph, int Inc, double dhb);
-
-void lrsLpFilter(double c[], int N, double frq, double Beta, int Num);
diff --git a/main/libresample/src/resample.c b/main/libresample/src/resample.c
deleted file mode 100644
index 85ff75f76..000000000
--- a/main/libresample/src/resample.c
+++ /dev/null
@@ -1,347 +0,0 @@
-/**********************************************************************
-
-  resample.c
-
-  Real-time library interface by Dominic Mazzoni
-
-  Based on resample-1.7:
-    http://www-ccrma.stanford.edu/~jos/resample/
-
-  License: LGPL - see the file LICENSE.txt for more information
-
-  This is the main source file, implementing all of the API
-  functions and handling all of the buffering logic.
-
-**********************************************************************/
-
-/* External interface */
-#include "../include/libresample.h"
-
-/* Definitions */
-#include "resample_defs.h"
-
-#include "filterkit.h"
-
-#include <stdlib.h>
-#include <stdio.h>
-#include <math.h>
-#include <string.h>
-
-typedef struct {
-   float  *Imp;
-   float  *ImpD;
-   float   LpScl;
-   UWORD   Nmult;
-   UWORD   Nwing;
-   double  minFactor;
-   double  maxFactor;
-   UWORD   XSize;
-   float  *X;
-   UWORD   Xp; /* Current "now"-sample pointer for input */
-   UWORD   Xread; /* Position to put new samples */
-   UWORD   Xoff;
-   UWORD   YSize;
-   float  *Y;
-   UWORD   Yp;
-   double  Time;
-} rsdata;
-
-void *resample_dup(const void *	handle)
-{
-   const rsdata *cpy = (const rsdata *)handle;
-   rsdata *hp = (rsdata *)malloc(sizeof(rsdata));
-
-   hp->minFactor = cpy->minFactor;
-   hp->maxFactor = cpy->maxFactor;
-   hp->Nmult = cpy->Nmult;
-   hp->LpScl = cpy->LpScl;
-   hp->Nwing = cpy->Nwing;
-
-   hp->Imp = (float *)malloc(hp->Nwing * sizeof(float));
-   memcpy(hp->Imp, cpy->Imp, hp->Nwing * sizeof(float));
-   hp->ImpD = (float *)malloc(hp->Nwing * sizeof(float));
-   memcpy(hp->ImpD, cpy->ImpD, hp->Nwing * sizeof(float));
-
-   hp->Xoff = cpy->Xoff;
-   hp->XSize = cpy->XSize;
-   hp->X = (float *)malloc((hp->XSize + hp->Xoff) * sizeof(float));
-   memcpy(hp->X, cpy->X, (hp->XSize + hp->Xoff) * sizeof(float));
-   hp->Xp = cpy->Xp;
-   hp->Xread = cpy->Xread;
-   hp->YSize = cpy->YSize;
-   hp->Y = (float *)malloc(hp->YSize * sizeof(float));
-   memcpy(hp->Y, cpy->Y, hp->YSize * sizeof(float));
-   hp->Yp = cpy->Yp;
-   hp->Time = cpy->Time;
-   
-   return (void *)hp;
-}
-
-void *resample_open(int highQuality, double minFactor, double maxFactor)
-{
-   double *Imp64;
-   double Rolloff, Beta;
-   rsdata *hp;
-   UWORD   Xoff_min, Xoff_max;
-   int i;
-
-   /* Just exit if we get invalid factors */
-   if (minFactor <= 0.0 || maxFactor <= 0.0 || maxFactor < minFactor) {
-      #if defined(DEBUG)
-      fprintf(stderr,
-              "libresample: "
-              "minFactor and maxFactor must be positive real numbers,\n"
-              "and maxFactor should be larger than minFactor.\n");
-      #endif
-      return 0;
-   }
-
-   hp = (rsdata *)malloc(sizeof(rsdata));
-
-   hp->minFactor = minFactor;
-   hp->maxFactor = maxFactor;
- 
-   if (highQuality)
-      hp->Nmult = 35;
-   else
-      hp->Nmult = 11;
-
-   hp->LpScl = 1.0;
-   hp->Nwing = Npc*(hp->Nmult-1)/2; /* # of filter coeffs in right wing */
-
-   Rolloff = 0.90;
-   Beta = 6;
-
-   Imp64 = (double *)malloc(hp->Nwing * sizeof(double));
-
-   lrsLpFilter(Imp64, hp->Nwing, 0.5*Rolloff, Beta, Npc);
-
-   hp->Imp = (float *)malloc(hp->Nwing * sizeof(float));
-   hp->ImpD = (float *)malloc(hp->Nwing * sizeof(float));
-   for(i=0; i<hp->Nwing; i++)
-      hp->Imp[i] = Imp64[i];
-
-   /* Storing deltas in ImpD makes linear interpolation
-      of the filter coefficients faster */
-   for (i=0; i<hp->Nwing-1; i++)
-      hp->ImpD[i] = hp->Imp[i+1] - hp->Imp[i];
-
-   /* Last coeff. not interpolated */
-   hp->ImpD[hp->Nwing-1] = - hp->Imp[hp->Nwing-1];
-
-   free(Imp64);
-
-   /* Calc reach of LP filter wing (plus some creeping room) */
-   Xoff_min = ((hp->Nmult+1)/2.0) * MAX(1.0, 1.0/minFactor) + 10;
-   Xoff_max = ((hp->Nmult+1)/2.0) * MAX(1.0, 1.0/maxFactor) + 10;
-   hp->Xoff = MAX(Xoff_min, Xoff_max);
-
-   /* Make the inBuffer size at least 4096, but larger if necessary
-      in order to store the minimum reach of the LP filter and then some.
-      Then allocate the buffer an extra Xoff larger so that
-      we can zero-pad up to Xoff zeros at the end when we reach the
-      end of the input samples. */
-   hp->XSize = MAX(2*hp->Xoff+10, 4096);
-   hp->X = (float *)malloc((hp->XSize + hp->Xoff) * sizeof(float));
-   hp->Xp = hp->Xoff;
-   hp->Xread = hp->Xoff;
-   
-   /* Need Xoff zeros at begining of X buffer */
-   for(i=0; i<hp->Xoff; i++)
-      hp->X[i]=0;
-
-   /* Make the outBuffer long enough to hold the entire processed
-      output of one inBuffer */
-   hp->YSize = (int)(((double)hp->XSize)*maxFactor+2.0);
-   hp->Y = (float *)malloc(hp->YSize * sizeof(float));
-   hp->Yp = 0;
-
-   hp->Time = (double)hp->Xoff; /* Current-time pointer for converter */
-   
-   return (void *)hp;
-}
-
-int resample_get_filter_width(const void   *handle)
-{
-   const rsdata *hp = (const rsdata *)handle;
-   return hp->Xoff;
-}
-
-int resample_process(void   *handle,
-                     double  factor,
-                     float  *inBuffer,
-                     int     inBufferLen,
-                     int     lastFlag,
-                     int    *inBufferUsed, /* output param */
-                     float  *outBuffer,
-                     int     outBufferLen)
-{
-   rsdata *hp = (rsdata *)handle;
-   float  *Imp = hp->Imp;
-   float  *ImpD = hp->ImpD;
-   float  LpScl = hp->LpScl;
-   UWORD  Nwing = hp->Nwing;
-   BOOL interpFilt = FALSE; /* TRUE means interpolate filter coeffs */
-   int outSampleCount;
-   UWORD Nout, Ncreep, Nreuse;
-   int Nx;
-   int i, len;
-
-   #if defined(DEBUG)
-   fprintf(stderr, "resample_process: in=%d, out=%d lastFlag=%d\n",
-           inBufferLen, outBufferLen, lastFlag);
-   #endif
-
-   /* Initialize inBufferUsed and outSampleCount to 0 */
-   *inBufferUsed = 0;
-   outSampleCount = 0;
-
-   if (factor < hp->minFactor || factor > hp->maxFactor) {
-      #if defined(DEBUG)
-      fprintf(stderr,
-              "libresample: factor %f is not between "
-              "minFactor=%f and maxFactor=%f",
-              factor, hp->minFactor, hp->maxFactor);
-      #endif
-      return -1;
-   }
-
-   /* Start by copying any samples still in the Y buffer to the output
-      buffer */
-   if (hp->Yp && (outBufferLen-outSampleCount)>0) {
-      len = MIN(outBufferLen-outSampleCount, hp->Yp);
-      for(i=0; i<len; i++)
-         outBuffer[outSampleCount+i] = hp->Y[i];
-      outSampleCount += len;
-      for(i=0; i<hp->Yp-len; i++)
-         hp->Y[i] = hp->Y[i+len];
-      hp->Yp -= len;
-   }
-
-   /* If there are still output samples left, return now - we need
-      the full output buffer available to us... */
-   if (hp->Yp)
-      return outSampleCount;
-
-   /* Account for increased filter gain when using factors less than 1 */
-   if (factor < 1)
-      LpScl = LpScl*factor;
-
-   for(;;) {
-
-      /* This is the maximum number of samples we can process
-         per loop iteration */
-
-      #if defined(DEBUG)
-      printf("XSize: %d Xoff: %d Xread: %d Xp: %d lastFlag: %d\n",
-             hp->XSize, hp->Xoff, hp->Xread, hp->Xp, lastFlag);
-      #endif
-
-      /* Copy as many samples as we can from the input buffer into X */
-      len = hp->XSize - hp->Xread;
-
-      if (len >= (inBufferLen - (*inBufferUsed)))
-         len = (inBufferLen - (*inBufferUsed));
-
-      for(i=0; i<len; i++)
-         hp->X[hp->Xread + i] = inBuffer[(*inBufferUsed) + i];
-
-      *inBufferUsed += len;
-      hp->Xread += len;
-
-      if (lastFlag && (*inBufferUsed == inBufferLen)) {
-         /* If these are the last samples, zero-pad the
-            end of the input buffer and make sure we process
-            all the way to the end */
-         Nx = hp->Xread - hp->Xoff;
-         for(i=0; i<hp->Xoff; i++)
-            hp->X[hp->Xread + i] = 0;
-      }
-      else
-         Nx = hp->Xread - 2 * hp->Xoff;
-
-      #if defined(DEBUG)
-      fprintf(stderr, "new len=%d Nx=%d\n", len, Nx);
-      #endif
-
-      if (Nx <= 0)
-         break;
-
-      /* Resample stuff in input buffer */
-      if (factor >= 1) {      /* SrcUp() is faster if we can use it */
-         Nout = lrsSrcUp(hp->X, hp->Y, factor, &hp->Time, Nx,
-                         Nwing, LpScl, Imp, ImpD, interpFilt);
-      }
-      else {
-         Nout = lrsSrcUD(hp->X, hp->Y, factor, &hp->Time, Nx,
-                         Nwing, LpScl, Imp, ImpD, interpFilt);
-      }
-
-      #if defined(DEBUG)
-      printf("Nout: %d\n", Nout);
-      #endif
-      
-      hp->Time -= Nx;         /* Move converter Nx samples back in time */
-      hp->Xp += Nx;           /* Advance by number of samples processed */
-
-      /* Calc time accumulation in Time */
-      Ncreep = (int)(hp->Time) - hp->Xoff;
-      if (Ncreep) {
-         hp->Time -= Ncreep;  /* Remove time accumulation */
-         hp->Xp += Ncreep;    /* and add it to read pointer */
-      }
-
-      /* Copy part of input signal that must be re-used */
-      Nreuse = hp->Xread - (hp->Xp - hp->Xoff);
-
-      for (i=0; i<Nreuse; i++)
-         hp->X[i] = hp->X[i + (hp->Xp - hp->Xoff)];
-
-      #if defined(DEBUG)
-      printf("New Xread=%d\n", Nreuse);
-      #endif
-
-      hp->Xread = Nreuse;  /* Pos in input buff to read new data into */
-      hp->Xp = hp->Xoff;
-      
-      /* Check to see if output buff overflowed (shouldn't happen!) */
-      if (Nout > hp->YSize) {
-         #if defined(DEBUG)
-         printf("Nout: %d YSize: %d\n", Nout, hp->YSize);
-         #endif
-         fprintf(stderr, "libresample: Output array overflow!\n");
-         return -1;
-      }
-
-      hp->Yp = Nout;
-
-      /* Copy as many samples as possible to the output buffer */
-      if (hp->Yp && (outBufferLen-outSampleCount)>0) {
-         len = MIN(outBufferLen-outSampleCount, hp->Yp);
-         for(i=0; i<len; i++)
-            outBuffer[outSampleCount+i] = hp->Y[i];
-         outSampleCount += len;
-         for(i=0; i<hp->Yp-len; i++)
-            hp->Y[i] = hp->Y[i+len];
-         hp->Yp -= len;
-      }
-
-      /* If there are still output samples left, return now,
-         since we need the full output buffer available */
-      if (hp->Yp)
-         break;
-   }
-
-   return outSampleCount;
-}
-
-void resample_close(void *handle)
-{
-   rsdata *hp = (rsdata *)handle;
-   free(hp->X);
-   free(hp->Y);
-   free(hp->Imp);
-   free(hp->ImpD);
-   free(hp);
-}
-
diff --git a/main/libresample/src/resample_defs.h b/main/libresample/src/resample_defs.h
deleted file mode 100644
index a0e7afc37..000000000
--- a/main/libresample/src/resample_defs.h
+++ /dev/null
@@ -1,88 +0,0 @@
-/**********************************************************************
-
-  resample_defs.h
-
-  Real-time library interface by Dominic Mazzoni
-
-  Based on resample-1.7:
-    http://www-ccrma.stanford.edu/~jos/resample/
-
-  License: LGPL - see the file LICENSE.txt for more information
-
-**********************************************************************/
-
-#ifndef __RESAMPLE_DEFS__
-#define __RESAMPLE_DEFS__
-
-#if 0
-#if !defined(WIN32) && !defined(__CYGWIN__)
-#include "config.h"
-#endif
-#endif
-
-#ifndef TRUE
-#define TRUE  1
-#endif
-
-#ifndef FALSE
-#define FALSE 0
-#endif
-
-#ifndef PI
-#define PI (3.14159265358979232846)
-#endif
-
-#ifndef PI2
-#define PI2 (6.28318530717958465692)
-#endif
-
-#define D2R (0.01745329348)          /* (2*pi)/360 */
-#define R2D (57.29577951)            /* 360/(2*pi) */
-
-#ifndef MAX
-#define MAX(x,y) ((x)>(y) ?(x):(y))
-#endif
-#ifndef MIN
-#define MIN(x,y) ((x)<(y) ?(x):(y))
-#endif
-
-#ifndef ABS
-#define ABS(x)   ((x)<0   ?(-(x)):(x))
-#endif
-
-#ifndef SGN
-#define SGN(x)   ((x)<0   ?(-1):((x)==0?(0):(1)))
-#endif
-
-#if HAVE_INTTYPES_H
-  #include <inttypes.h>
-  typedef char           BOOL;
-  typedef int32_t        WORD;
-  typedef uint32_t       UWORD;
-#else
-  typedef char           BOOL;
-  typedef int            WORD;
-  typedef unsigned int   UWORD;
-#endif
-
-#ifdef DEBUG
-#define INLINE
-#else
-#define INLINE inline
-#endif
-
-/* Accuracy */
-
-#define Npc 4096
-
-/* Function prototypes */
-
-int lrsSrcUp(float X[], float Y[], double factor, double *Time,
-             UWORD Nx, UWORD Nwing, float LpScl,
-             float Imp[], float ImpD[], BOOL Interp);
-
-int lrsSrcUD(float X[], float Y[], double factor, double *Time,
-             UWORD Nx, UWORD Nwing, float LpScl,
-             float Imp[], float ImpD[], BOOL Interp);
-
-#endif
diff --git a/main/libresample/src/resamplesubs.c b/main/libresample/src/resamplesubs.c
deleted file mode 100644
index c3c095dc0..000000000
--- a/main/libresample/src/resamplesubs.c
+++ /dev/null
@@ -1,123 +0,0 @@
-/**********************************************************************
-
-  resamplesubs.c
-
-  Real-time library interface by Dominic Mazzoni
-
-  Based on resample-1.7:
-    http://www-ccrma.stanford.edu/~jos/resample/
-
-  License: LGPL - see the file LICENSE.txt for more information
-
-  This file provides the routines that do sample-rate conversion
-  on small arrays, calling routines from filterkit.
-
-**********************************************************************/
-
-/* Definitions */
-#include "resample_defs.h"
-
-#include "filterkit.h"
-
-#include <stdlib.h>
-#include <stdio.h>
-#include <math.h>
-#include <string.h>
-
-/* Sampling rate up-conversion only subroutine;
- * Slightly faster than down-conversion;
- */
-int lrsSrcUp(float X[],
-             float Y[],
-             double factor,
-             double *TimePtr,
-             UWORD Nx,
-             UWORD Nwing,
-             float LpScl,
-             float Imp[],
-             float ImpD[],
-             BOOL Interp)
-{
-    float *Xp, *Ystart;
-    float v;
-    
-    double CurrentTime = *TimePtr;
-    double dt;                 /* Step through input signal */ 
-    double endTime;            /* When Time reaches EndTime, return to user */
-    
-    dt = 1.0/factor;           /* Output sampling period */
-    
-    Ystart = Y;
-    endTime = CurrentTime + Nx;
-    while (CurrentTime < endTime)
-    {
-        double LeftPhase = CurrentTime-floor(CurrentTime);
-        double RightPhase = 1.0 - LeftPhase;
-
-        Xp = &X[(int)CurrentTime]; /* Ptr to current input sample */
-        /* Perform left-wing inner product */
-        v = lrsFilterUp(Imp, ImpD, Nwing, Interp, Xp,
-                        LeftPhase, -1);
-        /* Perform right-wing inner product */
-        v += lrsFilterUp(Imp, ImpD, Nwing, Interp, Xp+1, 
-                         RightPhase, 1);
-
-        v *= LpScl;   /* Normalize for unity filter gain */
-
-        *Y++ = v;               /* Deposit output */
-        CurrentTime += dt;      /* Move to next sample by time increment */
-    }
-
-    *TimePtr = CurrentTime;
-    return (Y - Ystart);        /* Return the number of output samples */
-}
-
-/* Sampling rate conversion subroutine */
-
-int lrsSrcUD(float X[],
-             float Y[],
-             double factor,
-             double *TimePtr,
-             UWORD Nx,
-             UWORD Nwing,
-             float LpScl,
-             float Imp[],
-             float ImpD[],
-             BOOL Interp)
-{
-    float *Xp, *Ystart;
-    float v;
-
-    double CurrentTime = (*TimePtr);
-    double dh;                 /* Step through filter impulse response */
-    double dt;                 /* Step through input signal */
-    double endTime;            /* When Time reaches EndTime, return to user */
-    
-    dt = 1.0/factor;            /* Output sampling period */
-    
-    dh = MIN(Npc, factor*Npc);  /* Filter sampling period */
-    
-    Ystart = Y;
-    endTime = CurrentTime + Nx;
-    while (CurrentTime < endTime)
-    {
-        double LeftPhase = CurrentTime-floor(CurrentTime);
-        double RightPhase = 1.0 - LeftPhase;
-
-        Xp = &X[(int)CurrentTime];     /* Ptr to current input sample */
-        /* Perform left-wing inner product */
-        v = lrsFilterUD(Imp, ImpD, Nwing, Interp, Xp,
-                        LeftPhase, -1, dh);
-        /* Perform right-wing inner product */
-        v += lrsFilterUD(Imp, ImpD, Nwing, Interp, Xp+1, 
-                         RightPhase, 1, dh);
-
-        v *= LpScl;   /* Normalize for unity filter gain */
-        *Y++ = v;               /* Deposit output */
-        
-        CurrentTime += dt;      /* Move to next sample by time increment */
-    }
-
-    *TimePtr = CurrentTime;
-    return (Y - Ystart);        /* Return the number of output samples */
-}
diff --git a/main/libresample/tests/compareresample.c b/main/libresample/tests/compareresample.c
deleted file mode 100644
index 8773c9d4e..000000000
--- a/main/libresample/tests/compareresample.c
+++ /dev/null
@@ -1,183 +0,0 @@
-/**********************************************************************
-
-  compareresample.c
-
-  Real-time library interface by Dominic Mazzoni
-
-  Based on resample-1.7:
-    http://www-ccrma.stanford.edu/~jos/resample/
-
-  License: LGPL - see the file LICENSE.txt for more information
-
-**********************************************************************/
-
-#include "../include/libresample.h"
-
-#include <samplerate.h>
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <math.h>
-
-#include <sys/time.h>
-
-#define MIN(A, B) (A) < (B)? (A) : (B)
-
-void dostat(char *name, float *d1, float *d2, int len)
-{
-   int i;
-   double sum, sumsq, err, rmserr;
-
-   sum = 0.0;
-   sumsq = 0.0;
-   for(i=0; i<len; i++) {
-      double diff = d1[i] - d2[i];
-      sum += fabs(diff);
-      sumsq += diff * diff;
-   }
-   err = sum / len;
-   rmserr = sqrt(sumsq / len);
-   printf("   %s: Avg err: %f RMS err: %f\n", name, err, rmserr);
-}
-
-void runtest(float *src, int srclen,
-             float *ans, int anslen,
-             double factor)
-{
-   struct timeval tv0, tv1;
-   int dstlen = (int)(srclen * factor);
-   float *dst_rs = (float *)malloc((dstlen+100) * sizeof(float));
-   float *dst_rabbit = (float *)malloc((dstlen+100) * sizeof(float));
-   void *handle;
-   SRC_DATA rabbit;
-   double deltat;
-   int srcblocksize = srclen;
-   int dstblocksize = dstlen;
-   int i, out, out_rabbit, o, srcused;
-   int statlen, srcpos;
-
-   /* do resample */
-
-   for(i=0; i<dstlen+100; i++)
-      dst_rs[i] = -99.0;
-
-   gettimeofday(&tv0, NULL);
-
-   handle = resample_open(1, factor, factor);
-   out = 0;
-   srcpos = 0;
-   for(;;) {
-      int srcBlock = MIN(srclen-srcpos, srcblocksize);
-      int lastFlag = (srcBlock == srclen-srcpos);
-
-      o = resample_process(handle, factor,
-                           &src[srcpos], srcBlock,
-                           lastFlag, &srcused,
-                           &dst_rs[out], MIN(dstlen-out, dstblocksize));
-      srcpos += srcused;
-      if (o >= 0)
-         out += o;
-      if (o < 0 || (o == 0 && srcpos == srclen))
-         break;
-   }
-   resample_close(handle);
-
-   gettimeofday(&tv1, NULL);
-   deltat =
-      (tv1.tv_sec + tv1.tv_usec * 0.000001) -
-      (tv0.tv_sec + tv0.tv_usec * 0.000001);
-
-   if (o < 0) {
-      printf("Error: resample_process returned an error: %d\n", o);
-   }
-
-   if (out <= 0) {
-      printf("Error: resample_process returned %d samples\n", out);
-      free(dst_rs);
-      return;
-   }
-
-   printf("   resample: %.3f seconds, %d outputs\n", deltat, out);
-
-   /* do rabbit (Erik's libsamplerate) */
-
-   for(i=0; i<dstlen+100; i++)
-      dst_rabbit[i] = -99.0;
-
-   rabbit.data_in = src;
-   rabbit.data_out = dst_rabbit;
-   rabbit.input_frames = srclen;
-   rabbit.output_frames = dstlen;
-   rabbit.input_frames_used = 0;
-   rabbit.output_frames_gen = 0;
-   rabbit.end_of_input = 1;
-   rabbit.src_ratio = factor;
-
-   gettimeofday(&tv0, NULL);
-
-   /* src_simple(&rabbit, SRC_SINC_BEST_QUALITY, 1); */
-   src_simple(&rabbit, SRC_SINC_FASTEST, 1);
-   /* src_simple(&rabbit, SRC_LINEAR, 1); */
-
-   gettimeofday(&tv1, NULL);
-   deltat =
-      (tv1.tv_sec + tv1.tv_usec * 0.000001) -
-      (tv0.tv_sec + tv0.tv_usec * 0.000001);
-
-   out_rabbit = rabbit.output_frames_gen;
-
-   printf("   rabbit  : %.3f seconds, %d outputs\n",
-          deltat, out_rabbit);
-
-   statlen = MIN(out, out_rabbit);
-   if (anslen > 0)
-      statlen = MIN(statlen, anslen);
-
-   if (ans) {
-      dostat("resample    ", dst_rs, ans, statlen);
-      dostat("rabbit      ", dst_rabbit, ans, statlen);
-   }
-   dostat(   "RS vs rabbit", dst_rs, dst_rabbit, statlen);
-
-   free(dst_rs);
-   free(dst_rabbit);
-}
-
-int main(int argc, char **argv)
-{
-   int i, srclen;
-   float *src, *ans;
-
-   printf("\n*** sin wave, factor = 1.0 *** \n\n");
-   srclen = 100000;
-   src = malloc(srclen * sizeof(float));
-   for(i=0; i<srclen; i++)
-      src[i] = sin(i/100.0);
-
-   runtest(src, srclen, src, srclen, 1.0);
-
-   printf("\n*** sin wave, factor = 0.25 *** \n\n");
-   srclen = 100000;
-   for(i=0; i<srclen; i++)
-      src[i] = sin(i/100.0);
-   ans = malloc((srclen/4) * sizeof(float));
-   for(i=0; i<srclen/4; i++)
-      ans[i] = sin(i/25.0);
-
-   runtest(src, srclen, ans, srclen/4, 0.25);
-   free(ans);
-
-   printf("\n*** sin wave, factor = 4.0 *** \n\n");
-   srclen = 20000;
-   for(i=0; i<srclen; i++)
-      src[i] = sin(i/100.0);
-   ans = malloc((srclen*4) * sizeof(float));
-   for(i=0; i<srclen*4; i++)
-      ans[i] = sin(i/400.0);
-
-   runtest(src, srclen, ans, srclen*4, 4.0);
-   free(ans);
-   free(src);
-
-   return 0;
-}
diff --git a/main/libresample/tests/resample-sndfile.c b/main/libresample/tests/resample-sndfile.c
deleted file mode 100644
index e780228c1..000000000
--- a/main/libresample/tests/resample-sndfile.c
+++ /dev/null
@@ -1,213 +0,0 @@
-/**********************************************************************
-
-  resample-sndfile.c
-
-  Written by Dominic Mazzoni
-
-  Based on resample-1.7:
-    http://www-ccrma.stanford.edu/~jos/resample/
-
-  License: LGPL - see the file LICENSE.txt for more information
-
-**********************************************************************/
-
-#include "../include/libresample.h"
-
-#include <sndfile.h>
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <math.h>
-
-#include <sys/time.h>
-
-#define MIN(A, B) (A) < (B)? (A) : (B)
-
-void usage(char *progname)
-{
-   fprintf(stderr, "Usage: %s -by <ratio> <input> <output>\n", progname);
-   fprintf(stderr, "       %s -to <rate> <input> <output>\n", progname);
-   fprintf(stderr, "\n");
-   exit(-1);
-}
-
-int main(int argc, char **argv)
-{
-   SNDFILE *srcfile, *dstfile;
-   SF_INFO srcinfo, dstinfo;
-   SF_FORMAT_INFO formatinfo;
-   char *extension;
-   void **handle;
-   int channels;
-   int srclen, dstlen;
-   float *src, *srci;
-   float *dst, *dsti;
-   double ratio = 0.0;
-   double srcrate;
-   double dstrate = 0.0;
-   struct timeval tv0, tv1;
-   double deltat;
-   int numformats;
-   int pos, bufferpos, outcount;
-   int i, c;
-
-   if (argc != 5)
-      usage(argv[0]);
-
-   if (!strcmp(argv[1], "-by")) {
-      ratio = atof(argv[2]);
-      if (ratio <= 0.0) {
-         fprintf(stderr, "Ratio of %f is illegal\n", ratio);
-         usage(argv[0]);
-      }
-   }
-   else if (!strcmp(argv[1], "-to")) {
-      dstrate = atof(argv[2]);
-      if (dstrate < 10.0 || dstrate > 100000.0) {
-         fprintf(stderr, "Sample rate of %f is illegal\n", dstrate);
-         usage(argv[0]);
-      }
-   }
-   else
-      usage(argv[0]);
-
-   memset(&srcinfo, 0, sizeof(srcinfo));
-   memset(&dstinfo, 0, sizeof(dstinfo));
-   srcfile = sf_open(argv[3], SFM_READ, &srcinfo);
-   if (!srcfile) {
-      fprintf(stderr, "%s", sf_strerror(NULL));
-      exit(-1);
-   }
-
-   srcrate = srcinfo.samplerate;
-   if (dstrate == 0.0)
-      dstrate = srcrate * ratio;
-   else
-      ratio = dstrate / srcrate;
-
-   channels = srcinfo.channels;
-
-   /* figure out format of destination file */
-
-   extension = strstr(argv[4], ".");
-   if (extension) {
-      extension++;
-      sf_command(NULL, SFC_GET_FORMAT_MAJOR_COUNT,
-                 &numformats, sizeof(numformats));
-      for(i=0; i<numformats; i++) {
-         memset(&formatinfo, 0, sizeof(formatinfo));
-         formatinfo.format = i;
-         sf_command(NULL, SFC_GET_FORMAT_MAJOR,
-                    &formatinfo, sizeof(formatinfo));
-         if (!strcmp(formatinfo.extension, extension)) {
-            printf("Using %s for output format.\n", formatinfo.name);
-            dstinfo.format = formatinfo.format |
-               (srcinfo.format & SF_FORMAT_SUBMASK);
-            break;
-         }            
-      }
-   }
-
-   if (!dstinfo.format) {
-      if (extension)
-         printf("Warning: output format (%s) not recognized, "
-                "using same as input format.\n",
-                extension);
-      dstinfo.format = srcinfo.format;
-   }
-
-   dstinfo.samplerate = (int)(dstrate + 0.5);
-   dstinfo.channels = channels;
-
-   dstfile = sf_open(argv[4], SFM_WRITE, &dstinfo);
-   if (!dstfile) {
-      fprintf(stderr, "%s", sf_strerror(NULL));
-      exit(-1);
-   }
-
-   printf("Source: %s (%d frames, %.2f Hz)\n",
-          argv[3], (int)srcinfo.frames, srcrate);
-   printf("Destination: %s (%.2f Hz, ratio=%.5f)\n", argv[4],
-          dstrate, ratio);
-
-   srclen = 4096;
-   dstlen = (srclen * ratio + 1000);
-   srci = (float *)malloc(srclen * channels * sizeof(float));
-   dsti = (float *)malloc(dstlen * channels * sizeof(float));
-   src = (float *)malloc(srclen * sizeof(float));
-   dst = (float *)malloc(dstlen * sizeof(float));
-
-   handle = (void **)malloc(channels * sizeof(void *));
-   for(c=0; c<channels; c++)
-      handle[c] = resample_open(1, ratio, ratio);
-
-   gettimeofday(&tv0, NULL);
-
-   pos = 0;
-   bufferpos = 0;
-   outcount = 0;
-   while(pos < srcinfo.frames) {
-      int block = MIN(srclen-bufferpos, srcinfo.frames-pos);
-      int lastFlag = (pos+block == srcinfo.frames);
-      int inUsed, inUsed2=0, out=0, out2=0;
-
-      sf_readf_float(srcfile, &srci[bufferpos*channels], block);
-      block += bufferpos;
-
-      for(c=0; c<channels; c++) {
-         for(i=0; i<block; i++)
-            src[i] = srci[i*channels+c];
-
-         inUsed = 0;
-         out = resample_process(handle[c], ratio, src, block, lastFlag,
-                                &inUsed, dst, dstlen);
-         if (c==0) {
-            inUsed2 = inUsed;
-            out2 = out;
-         }
-         else {
-            if (inUsed2 != inUsed || out2 != out) {
-               fprintf(stderr, "Fatal error: channels out of sync!\n");
-               exit(-1);
-            }
-         }
-
-         for(i=0; i<out; i++)
-	 {
-	    if(dst[i] <= -1)
-	       dsti[i*channels+c] = -1;
-	    else if(dst[i] >= 1)
-	       dsti[i*channels+c] = 1;
-	    else
-	       dsti[i*channels+c] = dst[i];
-	 }
-      }
-
-      sf_writef_float(dstfile, dsti, out);
-
-      bufferpos = block - inUsed;
-      for(i=0; i<bufferpos*channels; i++)
-         srci[i] = srci[i+(inUsed*channels)];
-      pos += inUsed;
-      outcount += out;
-   }
-
-   sf_close(srcfile);
-   sf_close(dstfile);
-
-   gettimeofday(&tv1, NULL);
-   deltat =
-      (tv1.tv_sec + tv1.tv_usec * 0.000001) -
-      (tv0.tv_sec + tv0.tv_usec * 0.000001);
-
-   printf("Elapsed time: %.3f seconds\n", deltat);
-   printf("%d frames written to output file\n", outcount);
-
-   free(src);
-   free(srci);
-   free(dst);
-   free(dsti);
-
-   exit(0);
-}
diff --git a/main/libresample/tests/testresample.c b/main/libresample/tests/testresample.c
deleted file mode 100644
index a59aa8bfd..000000000
--- a/main/libresample/tests/testresample.c
+++ /dev/null
@@ -1,182 +0,0 @@
-/**********************************************************************
-
-  testresample.c
-
-  Real-time library interface by Dominic Mazzoni
-
-  Based on resample-1.7:
-    http://www-ccrma.stanford.edu/~jos/resample/
-
-  License: LGPL - see the file LICENSE.txt for more information
-
-**********************************************************************/
-
-#include "../include/libresample.h"
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <math.h>
-
-#define MIN(A, B) (A) < (B)? (A) : (B)
-
-void runtest(int srclen, double freq, double factor,
-             int srcblocksize, int dstblocksize)
-{
-   int expectedlen = (int)(srclen * factor);
-   int dstlen = expectedlen + 1000;
-   float *src = (float *)malloc((srclen+100) * sizeof(float));
-   float *dst = (float *)malloc((dstlen+100) * sizeof(float));
-   void *handle;
-   double sum, sumsq, err, rmserr;
-   int i, out, o, srcused, errcount, rangecount;
-   int statlen, srcpos, lendiff;
-   int fwidth;
-
-   printf("-- srclen: %d sin freq: %.1f factor: %.3f srcblk: %d dstblk: %d\n",
-          srclen, freq, factor, srcblocksize, dstblocksize);
-
-   for(i=0; i<srclen; i++)
-      src[i] = sin(i/freq);
-   for(i=srclen; i<srclen+100; i++)
-      src[i] = -99.0;
-
-   for(i=0; i<dstlen+100; i++)
-      dst[i] = -99.0;
-
-   handle = resample_open(1, factor, factor);
-   fwidth = resample_get_filter_width(handle);
-   out = 0;
-   srcpos = 0;
-   for(;;) {
-      int srcBlock = MIN(srclen-srcpos, srcblocksize);
-      int lastFlag = (srcBlock == srclen-srcpos);
-
-      o = resample_process(handle, factor,
-                           &src[srcpos], srcBlock,
-                           lastFlag, &srcused,
-                           &dst[out], MIN(dstlen-out, dstblocksize));
-      srcpos += srcused;
-      if (o >= 0)
-         out += o;
-      if (o < 0 || (o == 0 && srcpos == srclen))
-         break;
-   }
-   resample_close(handle);
-
-   if (o < 0) {
-      printf("Error: resample_process returned an error: %d\n", o);
-   }
-
-   if (out <= 0) {
-      printf("Error: resample_process returned %d samples\n", out);
-      free(src);
-      free(dst);
-      return;
-   }
-
-   lendiff = abs(out - expectedlen);
-   if (lendiff > (int)(2*factor + 1.0)) {
-      printf("   Expected ~%d, got %d samples out\n",
-             expectedlen, out);
-   }
-   
-   sum = 0.0;
-   sumsq = 0.0;
-   errcount = 0.0;
-
-   /* Don't compute statistics on all output values; the last few
-      are guaranteed to be off because it's based on far less
-      interpolation. */
-   statlen = out - fwidth;
-
-   for(i=0; i<statlen; i++) {
-      double diff = sin((i/freq)/factor) - dst[i];
-      if (fabs(diff) > 0.05) {
-         if (errcount == 0)
-            printf("   First error at i=%d: expected %.3f, got %.3f\n",
-                   i, sin((i/freq)/factor), dst[i]);
-         errcount++;
-      }
-      sum += fabs(diff);
-      sumsq += diff * diff;
-   }
-
-   rangecount = 0;
-   for(i=0; i<statlen; i++) {
-      if (dst[i] < -1.01 || dst[i] > 1.01) {
-         if (rangecount == 0)
-            printf("   Error at i=%d: value is %.3f\n", i, dst[i]);
-         rangecount++;
-      }
-   }
-   if (rangecount > 1)
-      printf("   At least %d samples were out of range\n", rangecount);
-
-   if (errcount > 0) {
-      i = out - 1;
-      printf("   i=%d:  expected %.3f, got %.3f\n",
-             i, sin((i/freq)/factor), dst[i]);
-      printf("   At least %d samples had significant error.\n", errcount);
-   }
-   err = sum / statlen;
-   rmserr = sqrt(sumsq / statlen);
-   printf("   Out: %d samples  Avg err: %f RMS err: %f\n", out, err, rmserr);
-   free(src);
-   free(dst);
-}
-
-int main(int argc, char **argv)
-{
-   int i, srclen, dstlen, ifreq;
-   double factor;
-
-   printf("\n*** Vary source block size*** \n\n");
-   srclen = 10000;
-   ifreq = 100;
-   for(i=0; i<20; i++) {
-      factor = ((rand() % 16) + 1) / 4.0;
-      dstlen = (int)(srclen * factor + 10);
-      runtest(srclen, (double)ifreq, factor, 64, dstlen);
-      runtest(srclen, (double)ifreq, factor, 32, dstlen);
-      runtest(srclen, (double)ifreq, factor, 8, dstlen);
-      runtest(srclen, (double)ifreq, factor, 2, dstlen);
-      runtest(srclen, (double)ifreq, factor, srclen, dstlen);
-   }
-
-   printf("\n*** Vary dest block size ***\n\n");
-   srclen = 10000;
-   ifreq = 100;
-   for(i=0; i<20; i++) {
-      factor = ((rand() % 16) + 1) / 4.0;
-      runtest(srclen, (double)ifreq, factor, srclen, 32);
-      dstlen = (int)(srclen * factor + 10);
-      runtest(srclen, (double)ifreq, factor, srclen, dstlen);
-   }
-
-   printf("\n*** Resample factor 1.0, testing different srclen ***\n\n");
-   ifreq = 40;
-   for(i=0; i<100; i++) {
-      srclen = (rand() % 30000) + 10;
-      dstlen = (int)(srclen + 10);
-      runtest(srclen, (double)ifreq, 1.0, srclen, dstlen);
-   }
-
-   printf("\n*** Resample factor 1.0, testing different sin freq ***\n\n");
-   srclen = 10000;
-   for(i=0; i<100; i++) {
-      ifreq = ((int)rand() % 10000) + 1;
-      dstlen = (int)(srclen * 10);
-      runtest(srclen, (double)ifreq, 1.0, srclen, dstlen);
-   }
-
-   printf("\n*** Resample with different factors ***\n\n");
-   srclen = 10000;
-   ifreq = 100;
-   for(i=0; i<100; i++) {
-      factor = ((rand() % 64) + 1) / 4.0;
-      dstlen = (int)(srclen * factor + 10);
-      runtest(srclen, (double)ifreq, factor, srclen, dstlen);
-   }
-
-   return 0;
-}
diff --git a/main/libresample/win/libresample.dsp b/main/libresample/win/libresample.dsp
deleted file mode 100644
index 4ebb51e46..000000000
--- a/main/libresample/win/libresample.dsp
+++ /dev/null
@@ -1,116 +0,0 @@
-# Microsoft Developer Studio Project File - Name="libresample" - Package Owner=<4>
-# Microsoft Developer Studio Generated Build File, Format Version 6.00
-# ** DO NOT EDIT **
-
-# TARGTYPE "Win32 (x86) Static Library" 0x0104
-
-CFG=libresample - Win32 Debug
-!MESSAGE This is not a valid makefile. To build this project using NMAKE,
-!MESSAGE use the Export Makefile command and run
-!MESSAGE 
-!MESSAGE NMAKE /f "libresample.mak".
-!MESSAGE 
-!MESSAGE You can specify a configuration when running NMAKE
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
-!MESSAGE NMAKE /f "libresample.mak" CFG="libresample - Win32 Debug"
-!MESSAGE 
-!MESSAGE Possible choices for configuration are:
-!MESSAGE 
-!MESSAGE "libresample - Win32 Release" (based on "Win32 (x86) Static Library")
-!MESSAGE "libresample - Win32 Debug" (based on "Win32 (x86) Static Library")
-!MESSAGE 
-
-# Begin Project
-# PROP AllowPerConfigDependencies 0
-# PROP Scc_ProjName ""
-# PROP Scc_LocalPath ""
-CPP=cl.exe
-RSC=rc.exe
-
-!IF  "$(CFG)" == "libresample - Win32 Release"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "Release"
-# PROP BASE Intermediate_Dir "Release"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "Release"
-# PROP Intermediate_Dir "Release"
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_MBCS" /D "_LIB" /YX /FD /c
-# ADD CPP /nologo /MT /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_MBCS" /D "_LIB" /YX /FD /c
-# ADD BASE RSC /l 0x409 /d "NDEBUG"
-# ADD RSC /l 0x409 /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LIB32=link.exe -lib
-# ADD BASE LIB32 /nologo
-# ADD LIB32 /nologo /out:"libresample.lib"
-
-!ELSEIF  "$(CFG)" == "libresample - Win32 Debug"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 1
-# PROP BASE Output_Dir "Debug"
-# PROP BASE Intermediate_Dir "Debug"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 1
-# PROP Output_Dir "Debug"
-# PROP Intermediate_Dir "Debug"
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /W3 /Gm /GX /ZI /Od /D "WIN32" /D "_DEBUG" /D "_MBCS" /D "_LIB" /YX /FD /GZ /c
-# ADD CPP /nologo /MTd /W3 /Gm /GX /ZI /Od /D "WIN32" /D "_DEBUG" /D "_MBCS" /D "_LIB" /YX /FD /GZ /c
-# ADD BASE RSC /l 0x409 /d "_DEBUG"
-# ADD RSC /l 0x409 /d "_DEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LIB32=link.exe -lib
-# ADD BASE LIB32 /nologo
-# ADD LIB32 /nologo /out:"libresampled.lib"
-
-!ENDIF 
-
-# Begin Target
-
-# Name "libresample - Win32 Release"
-# Name "libresample - Win32 Debug"
-# Begin Group "Source Files"
-
-# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
-# Begin Source File
-
-SOURCE=..\src\filterkit.c
-# End Source File
-# Begin Source File
-
-SOURCE=..\src\resample.c
-# End Source File
-# Begin Source File
-
-SOURCE=..\src\resamplesubs.c
-# End Source File
-# End Group
-# Begin Group "Header Files"
-
-# PROP Default_Filter "h;hpp;hxx;hm;inl"
-# Begin Source File
-
-SOURCE=..\src\filterkit.h
-# End Source File
-# Begin Source File
-
-SOURCE=..\include\libresample.h
-# End Source File
-# Begin Source File
-
-SOURCE=..\src\resample_defs.h
-# End Source File
-# End Group
-# End Target
-# End Project
diff --git a/main/libresample/win/libresample.vcproj b/main/libresample/win/libresample.vcproj
deleted file mode 100644
index c23845f47..000000000
--- a/main/libresample/win/libresample.vcproj
+++ /dev/null
@@ -1,192 +0,0 @@
-<?xml version="1.0" encoding="Windows-1252"?>
-<VisualStudioProject
-	ProjectType="Visual C++"
-	Version="7.10"
-	Name="libresample"
-	SccProjectName=""
-	SccLocalPath="">
-	<Platforms>
-		<Platform
-			Name="Win32"/>
-	</Platforms>
-	<Configurations>
-		<Configuration
-			Name="Debug|Win32"
-			OutputDirectory=".\Debug"
-			IntermediateDirectory=".\Debug"
-			ConfigurationType="4"
-			UseOfMFC="0"
-			ATLMinimizesCRunTimeLibraryUsage="FALSE"
-			CharacterSet="2">
-			<Tool
-				Name="VCCLCompilerTool"
-				Optimization="0"
-				PreprocessorDefinitions="WIN32;_DEBUG;_LIB"
-				BasicRuntimeChecks="3"
-				RuntimeLibrary="1"
-				UsePrecompiledHeader="2"
-				PrecompiledHeaderFile=".\Debug/libresample.pch"
-				AssemblerListingLocation=".\Debug/"
-				ObjectFile=".\Debug/"
-				ProgramDataBaseFileName=".\Debug/"
-				WarningLevel="3"
-				SuppressStartupBanner="TRUE"
-				DebugInformationFormat="4"/>
-			<Tool
-				Name="VCCustomBuildTool"/>
-			<Tool
-				Name="VCLibrarianTool"
-				OutputFile="libresampled.lib"
-				SuppressStartupBanner="TRUE"/>
-			<Tool
-				Name="VCMIDLTool"/>
-			<Tool
-				Name="VCPostBuildEventTool"/>
-			<Tool
-				Name="VCPreBuildEventTool"/>
-			<Tool
-				Name="VCPreLinkEventTool"/>
-			<Tool
-				Name="VCResourceCompilerTool"
-				PreprocessorDefinitions="_DEBUG"
-				Culture="1033"/>
-			<Tool
-				Name="VCWebServiceProxyGeneratorTool"/>
-			<Tool
-				Name="VCXMLDataGeneratorTool"/>
-			<Tool
-				Name="VCManagedWrapperGeneratorTool"/>
-			<Tool
-				Name="VCAuxiliaryManagedWrapperGeneratorTool"/>
-		</Configuration>
-		<Configuration
-			Name="Release|Win32"
-			OutputDirectory=".\Release"
-			IntermediateDirectory=".\Release"
-			ConfigurationType="4"
-			UseOfMFC="0"
-			ATLMinimizesCRunTimeLibraryUsage="FALSE"
-			CharacterSet="2">
-			<Tool
-				Name="VCCLCompilerTool"
-				AdditionalOptions="/O2"
-				Optimization="2"
-				InlineFunctionExpansion="1"
-				OptimizeForProcessor="3"
-				PreprocessorDefinitions="WIN32;NDEBUG;_LIB"
-				StringPooling="TRUE"
-				RuntimeLibrary="0"
-				EnableFunctionLevelLinking="TRUE"
-				UsePrecompiledHeader="2"
-				PrecompiledHeaderFile=".\Release/libresample.pch"
-				AssemblerListingLocation=".\Release/"
-				ObjectFile=".\Release/"
-				ProgramDataBaseFileName=".\Release/"
-				WarningLevel="3"
-				SuppressStartupBanner="TRUE"/>
-			<Tool
-				Name="VCCustomBuildTool"/>
-			<Tool
-				Name="VCLibrarianTool"
-				OutputFile="libresample.lib"
-				SuppressStartupBanner="TRUE"/>
-			<Tool
-				Name="VCMIDLTool"/>
-			<Tool
-				Name="VCPostBuildEventTool"/>
-			<Tool
-				Name="VCPreBuildEventTool"/>
-			<Tool
-				Name="VCPreLinkEventTool"/>
-			<Tool
-				Name="VCResourceCompilerTool"
-				PreprocessorDefinitions="NDEBUG"
-				Culture="1033"/>
-			<Tool
-				Name="VCWebServiceProxyGeneratorTool"/>
-			<Tool
-				Name="VCXMLDataGeneratorTool"/>
-			<Tool
-				Name="VCManagedWrapperGeneratorTool"/>
-			<Tool
-				Name="VCAuxiliaryManagedWrapperGeneratorTool"/>
-		</Configuration>
-	</Configurations>
-	<References>
-	</References>
-	<Files>
-		<Filter
-			Name="Source Files"
-			Filter="cpp;c;cxx;rc;def;r;odl;idl;hpj;bat">
-			<File
-				RelativePath="..\src\filterkit.c">
-				<FileConfiguration
-					Name="Debug|Win32">
-					<Tool
-						Name="VCCLCompilerTool"
-						Optimization="0"
-						PreprocessorDefinitions=""
-						BasicRuntimeChecks="3"/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release|Win32">
-					<Tool
-						Name="VCCLCompilerTool"
-						Optimization="2"
-						PreprocessorDefinitions=""/>
-				</FileConfiguration>
-			</File>
-			<File
-				RelativePath="..\src\resample.c">
-				<FileConfiguration
-					Name="Debug|Win32">
-					<Tool
-						Name="VCCLCompilerTool"
-						Optimization="0"
-						PreprocessorDefinitions=""
-						BasicRuntimeChecks="3"/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release|Win32">
-					<Tool
-						Name="VCCLCompilerTool"
-						Optimization="2"
-						PreprocessorDefinitions=""/>
-				</FileConfiguration>
-			</File>
-			<File
-				RelativePath="..\src\resamplesubs.c">
-				<FileConfiguration
-					Name="Debug|Win32">
-					<Tool
-						Name="VCCLCompilerTool"
-						Optimization="0"
-						PreprocessorDefinitions=""
-						BasicRuntimeChecks="3"/>
-				</FileConfiguration>
-				<FileConfiguration
-					Name="Release|Win32">
-					<Tool
-						Name="VCCLCompilerTool"
-						Optimization="2"
-						PreprocessorDefinitions=""/>
-				</FileConfiguration>
-			</File>
-		</Filter>
-		<Filter
-			Name="Header Files"
-			Filter="h;hpp;hxx;hm;inl">
-			<File
-				RelativePath="..\src\filterkit.h">
-			</File>
-			<File
-				RelativePath="..\include\libresample.h">
-			</File>
-			<File
-				RelativePath="..\src\resample_defs.h">
-			</File>
-		</Filter>
-	</Files>
-	<Globals>
-	</Globals>
-</VisualStudioProject>
diff --git a/makeopts.in b/makeopts.in
index 8ea0fed7a..756b55b44 100644
--- a/makeopts.in
+++ b/makeopts.in
@@ -148,6 +148,9 @@ PORTAUDIO_LIB=@PORTAUDIO_LIB@
 PRI_INCLUDE=@PRI_INCLUDE@
 PRI_LIB=@PRI_LIB@
 
+RESAMPLE_INCLUDE=@RESAMPLE_INCLUDE@
+RESAMPLE_LIB=@RESAMPLE_LIB@
+
 SS7_INCLUDE=@SS7_INCLUDE@
 SS7_LIB=@SS7_LIB@