/* packet-eth.c * Routines for ethernet packet disassembly * * $Id: packet-eth.c,v 1.25 1999/11/30 23:56:35 gram Exp $ * * Ethereal - Network traffic analyzer * By Gerald Combs * Copyright 1998 Gerald Combs * * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #ifdef HAVE_CONFIG_H # include "config.h" #endif #ifdef HAVE_SYS_TYPES_H # include #endif #include #include "packet.h" #include "etypes.h" #include "resolv.h" extern const value_string etype_vals[]; /* protocols and header fields */ static int proto_eth = -1; static int hf_eth_dst = -1; static int hf_eth_src = -1; static int hf_eth_len = -1; static int hf_eth_type = -1; static gint ett_ieee8023 = -1; static gint ett_ether2 = -1; #define ETH_HEADER_SIZE 14 /* These are the Netware-ish names for the different Ethernet frame types. EthernetII: The ethernet with a Type field instead of a length field Ethernet802.2: An 802.3 header followed by an 802.3 header Ethernet802.3: A raw 802.3 packet. IPX/SPX can be the only payload. There's not 802.2 hdr in this. EthernetSNAP: Basically 802.2, just with 802.2SNAP. For our purposes, there's no difference between 802.2 and 802.2SNAP, since we just pass it down to dissect_llc(). -- Gilbert */ #define ETHERNET_II 0 #define ETHERNET_802_2 1 #define ETHERNET_802_3 2 #define ETHERNET_SNAP 3 void capture_eth(const u_char *pd, guint32 cap_len, packet_counts *ld) { guint16 etype; int offset = ETH_HEADER_SIZE; int ethhdr_type; /* the type of ethernet frame */ if (cap_len < ETH_HEADER_SIZE) { ld->other++; return; } etype = (pd[12] << 8) | pd[13]; /* either ethernet802.3 or ethernet802.2 */ if (etype <= IEEE_802_3_MAX_LEN) { /* Is there an 802.2 layer? I can tell by looking at the first 2 bytes after the 802.3 header. If they are 0xffff, then what follows the 802.3 header is an IPX payload, meaning no 802.2. (IPX/SPX is they only thing that can be contained inside a straight 802.3 packet). A non-0xffff value means that there's an 802.2 layer inside the 802.3 layer */ if (pd[14] == 0xff && pd[15] == 0xff) { ethhdr_type = ETHERNET_802_3; } else { ethhdr_type = ETHERNET_802_2; } } else { ethhdr_type = ETHERNET_II; } switch (ethhdr_type) { case ETHERNET_802_3: capture_ipx(pd, offset, cap_len, ld); break; case ETHERNET_802_2: capture_llc(pd, offset, cap_len, ld); break; case ETHERNET_II: capture_ethertype(etype, offset, pd, cap_len, ld); break; } } void dissect_eth(const u_char *pd, int offset, frame_data *fd, proto_tree *tree) { guint16 etype, length; proto_tree *fh_tree = NULL; proto_item *ti; int ethhdr_type; /* the type of ethernet frame */ if (fd->cap_len < ETH_HEADER_SIZE) { dissect_data(pd, offset, fd, tree); return; } SET_ADDRESS(&pi.dl_src, AT_ETHER, 6, &pd[offset+6]); SET_ADDRESS(&pi.src, AT_ETHER, 6, &pd[offset+6]); SET_ADDRESS(&pi.dl_dst, AT_ETHER, 6, &pd[offset+0]); SET_ADDRESS(&pi.dst, AT_ETHER, 6, &pd[offset+0]); if (check_col(fd, COL_PROTOCOL)) col_add_str(fd, COL_PROTOCOL, "Ethernet"); etype = pntohs(&pd[offset+12]); /* either ethernet802.3 or ethernet802.2 */ if (etype <= IEEE_802_3_MAX_LEN) { length = etype; /* Is there an 802.2 layer? I can tell by looking at the first 2 bytes after the 802.3 header. If they are 0xffff, then what follows the 802.3 header is an IPX payload, meaning no 802.2. (IPX/SPX is they only thing that can be contained inside a straight 802.3 packet). A non-0xffff value means that there's an 802.2 layer inside the 802.3 layer */ if (pd[offset+14] == 0xff && pd[offset+15] == 0xff) { ethhdr_type = ETHERNET_802_3; } else { ethhdr_type = ETHERNET_802_2; } if (check_col(fd, COL_INFO)) { col_add_fstr(fd, COL_INFO, "IEEE 802.3 %s", (ethhdr_type == ETHERNET_802_3 ? "Raw " : "")); } if (tree) { ti = proto_tree_add_item_format(tree, proto_eth, offset, ETH_HEADER_SIZE, NULL, "IEEE 802.3 %s", (ethhdr_type == ETHERNET_802_3 ? "Raw " : "")); fh_tree = proto_item_add_subtree(ti, ett_ieee8023); proto_tree_add_item(fh_tree, hf_eth_dst, offset+0, 6, &pd[offset+0]); proto_tree_add_item(fh_tree, hf_eth_src, offset+6, 6, &pd[offset+6]); proto_tree_add_item(fh_tree, hf_eth_len, offset+12, 2, length); /* Convert the LLC length from the 802.3 header to a total length, by adding in the Ethernet header size, and set the payload and captured-payload lengths to the minima of the total length and the frame lengths. */ length += ETH_HEADER_SIZE; if (pi.len > length) pi.len = length; if (pi.captured_len > length) pi.captured_len = length; } } else { ethhdr_type = ETHERNET_II; if (check_col(fd, COL_INFO)) col_add_str(fd, COL_INFO, "Ethernet II"); if (tree) { ti = proto_tree_add_item_format(tree, proto_eth, offset, ETH_HEADER_SIZE, NULL, "Ethernet II"); fh_tree = proto_item_add_subtree(ti, ett_ether2); proto_tree_add_item(fh_tree, hf_eth_dst, offset+0, 6, &pd[offset+0]); proto_tree_add_item(fh_tree, hf_eth_src, offset+6, 6, &pd[offset+6]); } } offset += ETH_HEADER_SIZE; switch (ethhdr_type) { case ETHERNET_802_3: dissect_ipx(pd, offset, fd, tree); break; case ETHERNET_802_2: dissect_llc(pd, offset, fd, tree); break; case ETHERNET_II: ethertype(etype, offset, pd, fd, tree, fh_tree, hf_eth_type); break; } } void proto_register_eth(void) { static hf_register_info hf[] = { { &hf_eth_dst, { "Destination", "eth.dst", FT_ETHER, BASE_NONE, NULL, 0x0, "Destination Hardware Address" }}, { &hf_eth_src, { "Source", "eth.src", FT_ETHER, BASE_NONE, NULL, 0x0, "Source Hardware Address" }}, { &hf_eth_len, { "Length", "eth.len", FT_UINT16, BASE_DEC, NULL, 0x0, "" }}, /* registered here but handled in ethertype.c */ { &hf_eth_type, { "Type", "eth.type", FT_UINT16, BASE_HEX, VALS(etype_vals), 0x0, "" }} }; static gint *ett[] = { &ett_ieee8023, &ett_ether2, }; proto_eth = proto_register_protocol ("Ethernet", "eth" ); proto_register_field_array(proto_eth, hf, array_length(hf)); proto_register_subtree_array(ett, array_length(ett)); }