#!/bin/sh # Setup development environment on macOS (tested with 10.6.8 and Xcode # 3.2.6 and with 10.12.4 and Xcode 8.3). # # Copyright 2011 Michael Tuexen, Joerg Mayer, Guy Harris (see AUTHORS file) # # Wireshark - Network traffic analyzer # By Gerald Combs # Copyright 1998 Gerald Combs # # This program is free software; you can redistribute it and/or # modify it under the terms of the GNU General Public License # as published by the Free Software Foundation; either version 2 # of the License, or (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. # # To install cmake # CMAKE=1 # # To install autotools # AUTOTOOLS=1 # # To build all libraries as 32-bit libraries uncomment the following three lines. # # export CFLAGS="$CFLAGS -arch i386" # export CXXFLAGS="$CXXFLAGS -arch i386" # export LDFLAGS="$LDFLAGS -arch i386" # # and change "macx-clang" to "macx-clang-32" in the line below. # # Note: when building against the 10.6 SDK, clang fails, because there's # a missing libstdc++.dylib in the SDK; this does not bother g++, however. # #TARGET_PLATFORM=macx-g++ TARGET_PLATFORM=macx-clang # # Versions of packages to download and install. # # # Some packages need xz to unpack their current source. # While tar, in newer versions of macOS, can uncompress xz'ed tarballs, # it can't do so in older versions, and xz isn't provided with macOS. # XZ_VERSION=5.0.8 # # Some packages need lzip to unpack their current source. # LZIP_VERSION=1.19 # # In case we want to build with cmake. # CMAKE_VERSION=${CMAKE_VERSION-2.8.12.2} # # The following libraries and tools are required even to build only TShark. # GETTEXT_VERSION=0.18.2 GLIB_VERSION=2.36.0 PKG_CONFIG_VERSION=0.28 # # libgpg-error is required for libgcrypt. # LIBGPG_ERROR_VERSION=1.27 # # libgcrypt is required. # LIBGCRYPT_VERSION=1.7.7 # # One or more of the following libraries are required to build Wireshark. # # To override the version of Qt or build the deprecated GTK interface call # the script with some of the variables set to the new values. Setting a # variable to empty will disable building the toolkit and will uninstall # any version previously installed by the script, e.g. # "GTK_VERSION=3.5.2 QT_VERSION= ./macos-setup.sh" # will build and install with GTK+ 3.5.2 and will not install Qt (and, # if the script installed Qt earlier, will un-install that version of Qt). # # Note that Qt 5, prior to 5.5.0, mishandles context menus in ways that, # for example, cause them not to work reliably in the packet detail or # packet data pane; see, for example, Qt bugs QTBUG-31937, QTBUG-41017, # and QTBUG-43464, all of which seem to be the same bug. # QT_VERSION=${QT_VERSION-5.8.0} #GTK_VERSION=${GTK_VERSION-2.24.17} if [ "$GTK_VERSION" ]; then # # We'll be building GTK+, so we need some additional libraries. # GTK_MAJOR_VERSION="`expr $GTK_VERSION : '\([0-9][0-9]*\).*'`" GTK_MINOR_VERSION="`expr $GTK_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`" GTK_DOTDOT_VERSION="`expr $GTK_VERSION : '[0-9][0-9]*\.[0-9][0-9]*\.\([0-9][0-9]*\).*'`" ATK_VERSION=2.8.0 PANGO_VERSION=1.30.1 PNG_VERSION=1.6.20 PIXMAN_VERSION=0.26.0 CAIRO_VERSION=1.12.2 GDK_PIXBUF_VERSION=2.28.0 fi if [ "$QT_VERSION" ]; then QT_MAJOR_VERSION="`expr $QT_VERSION : '\([0-9][0-9]*\).*'`" QT_MINOR_VERSION="`expr $QT_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`" QT_DOTDOT_VERSION="`expr $QT_VERSION : '[0-9][0-9]*\.[0-9][0-9]*\.\([0-9][0-9]*\).*'`" QT_MAJOR_MINOR_VERSION=$QT_MAJOR_VERSION.$QT_MINOR_VERSION QT_MAJOR_MINOR_DOTDOT_VERSION=$QT_MAJOR_VERSION.$QT_MINOR_VERSION.$QT_DOTDOT_VERSION fi # # The following libraries are optional. # Comment them out if you don't want them, but note that some of # the optional libraries are required by other optional libraries. # LIBSMI_VERSION=0.4.8 GNUTLS_VERSION=3.4.17 if [ "$GNUTLS_VERSION" ]; then # # We'll be building GnuTLS, so we may need some additional libraries. # We assume GnuTLS can work with Nettle; newer versions *only* use # Nettle, not libgcrypt. # GNUTLS_MAJOR_VERSION="`expr $GNUTLS_VERSION : '\([0-9][0-9]*\).*'`" GNUTLS_MINOR_VERSION="`expr $GNUTLS_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`" GNUTLS_DOTDOT_VERSION="`expr $GNUTLS_VERSION : '[0-9][0-9]*\.[0-9][0-9]*\.\([0-9][0-9]*\).*'`" NETTLE_VERSION=3.3 # # And, in turn, Nettle requires GMP. # GMP_VERSION=6.1.2 fi # Use 5.2.4, not 5.3, for now; lua_bitop.c hasn't been ported to 5.3 # yet, and we need to check for compatibility issues (we'd want Lua # scripts to work with 5.1, 5.2, and 5.3, as long as they only use Lua # features present in all three versions) LUA_VERSION=5.2.4 PORTAUDIO_VERSION=pa_stable_v19_20111121 SNAPPY_VERSION=1.1.3 LIBXML2_VERSION=2.9.4 LZ4_VERSION=r131 SBC_VERSION=1.3 GEOIP_VERSION=1.6.10 CARES_VERSION=1.12.0 LIBSSH_VERSION=0.7.3 NGHTTP2_VERSION=1.14.0 DARWIN_MAJOR_VERSION=`uname -r | sed 's/\([0-9]*\).*/\1/'` # # GNU autotools; they're provided with releases up to Snow Leopard, but # not in later releases, and the Snow Leopard version is too old for # current Wireshark, so we install them unconditionally. # AUTOCONF_VERSION=2.69 AUTOMAKE_VERSION=1.13.3 LIBTOOL_VERSION=2.4.6 install_xz() { if [ "$XZ_VERSION" -a ! -f xz-$XZ_VERSION-done ] ; then echo "Downloading, building, and installing xz:" [ -f xz-$XZ_VERSION.tar.bz2 ] || curl -L -O http://tukaani.org/xz/xz-$XZ_VERSION.tar.bz2 || exit 1 $no_build && echo "Skipping installation" && return bzcat xz-$XZ_VERSION.tar.bz2 | tar xf - || exit 1 cd xz-$XZ_VERSION CFLAGS="$CFLAGS -D_FORTIFY_SOURCE=0" ./configure || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch xz-$XZ_VERSION-done fi } uninstall_xz() { if [ ! -z "$installed_xz_version" ] ; then echo "Uninstalling xz:" cd xz-$installed_xz_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm xz-$installed_xz_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf xz-$installed_xz_version rm -rf xz-$installed_xz_version.tar.bz2 fi installed_xz_version="" fi } install_lzip() { if [ "$LZIP_VERSION" -a ! -f lzip-$LZIP_VERSION-done ] ; then echo "Downloading, building, and installing lzip:" [ -f lzip-$LZIP_VERSION.tar.gz ] || curl -L -O http://download.savannah.gnu.org/releases/lzip/lzip-$LZIP_VERSION.tar.gz || exit 1 $no_build && echo "Skipping installation" && return gzcat lzip-$LZIP_VERSION.tar.gz | tar xf - || exit 1 cd lzip-$LZIP_VERSION ./configure || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch lzip-$LZIP_VERSION-done fi } uninstall_lzip() { if [ ! -z "$installed_lzip_version" ] ; then echo "Uninstalling lzip:" cd lzip-$installed_lzip_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm lzip-$installed_lzip_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf lzip-$installed_lzip_version rm -rf lzip-$installed_lzip_version.tar.gz fi installed_lzip_version="" fi } install_autoconf() { if [ "$AUTOCONF_VERSION" -a ! -f autoconf-$AUTOCONF_VERSION-done ] ; then echo "Downloading, building and installing GNU autoconf..." [ -f autoconf-$AUTOCONF_VERSION.tar.xz ] || curl -L -O ftp://ftp.gnu.org/gnu/autoconf/autoconf-$AUTOCONF_VERSION.tar.xz || exit 1 $no_build && echo "Skipping installation" && return xzcat autoconf-$AUTOCONF_VERSION.tar.xz | tar xf - || exit 1 cd autoconf-$AUTOCONF_VERSION ./configure || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch autoconf-$AUTOCONF_VERSION-done fi } uninstall_autoconf() { if [ ! -z "$installed_autoconf_version" ] ; then # # automake and libtool depend on this, so uninstall them. # uninstall_libtool uninstall_automake echo "Uninstalling GNU autoconf:" cd autoconf-$installed_autoconf_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm autoconf-$installed_autoconf_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf autoconf-$installed_autoconf_version rm -rf autoconf-$installed_autoconf_version.tar.xz fi installed_autoconf_version="" fi } install_automake() { if [ "$AUTOMAKE_VERSION" -a ! -f automake-$AUTOMAKE_VERSION-done ] ; then echo "Downloading, building and installing GNU automake..." [ -f automake-$AUTOMAKE_VERSION.tar.xz ] || curl -L -O ftp://ftp.gnu.org/gnu/automake/automake-$AUTOMAKE_VERSION.tar.xz || exit 1 $no_build && echo "Skipping installation" && return xzcat automake-$AUTOMAKE_VERSION.tar.xz | tar xf - || exit 1 cd automake-$AUTOMAKE_VERSION ./configure || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch automake-$AUTOMAKE_VERSION-done fi } uninstall_automake() { if [ ! -z "$installed_automake_version" ] ; then # # libtool depends on this(?), so uninstall it. # uninstall_libtool "$@" echo "Uninstalling GNU automake:" cd automake-$installed_automake_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm automake-$installed_automake_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf automake-$installed_automake_version rm -rf automake-$installed_automake_version.tar.xz fi installed_automake_version="" fi } install_libtool() { if [ "$LIBTOOL_VERSION" -a ! -f libtool-$LIBTOOL_VERSION-done ] ; then echo "Downloading, building and installing GNU libtool..." [ -f libtool-$LIBTOOL_VERSION.tar.xz ] || curl -L -O ftp://ftp.gnu.org/gnu/libtool/libtool-$LIBTOOL_VERSION.tar.xz || exit 1 $no_build && echo "Skipping installation" && return xzcat libtool-$LIBTOOL_VERSION.tar.xz | tar xf - || exit 1 cd libtool-$LIBTOOL_VERSION ./configure || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 $DO_MV /usr/local/bin/libtool /usr/local/bin/glibtool $DO_MV /usr/local/bin/libtoolize /usr/local/bin/glibtoolize cd .. touch libtool-$LIBTOOL_VERSION-done fi } uninstall_libtool() { if [ ! -z "$installed_libtool_version" ] ; then echo "Uninstalling GNU libtool:" cd libtool-$installed_libtool_version $DO_MV /usr/local/bin/glibtool /usr/local/bin/libtool $DO_MV /usr/local/bin/glibtoolize /usr/local/bin/libtoolize $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm libtool-$installed_libtool_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf libtool-$installed_libtool_version rm -rf libtool-$installed_libtool_version.tar.xz fi installed_libtool_version="" fi } install_cmake() { if [ -n "$CMAKE" -a ! -f cmake-$CMAKE_VERSION-done ]; then echo "Downloading and installing CMake:" CMAKE_MAJOR_VERSION="`expr $CMAKE_VERSION : '\([0-9][0-9]*\).*'`" CMAKE_MINOR_VERSION="`expr $CMAKE_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`" CMAKE_DOTDOT_VERSION="`expr $CMAKE_VERSION : '[0-9][0-9]*\.[0-9][0-9]*\.\([0-9][0-9]*\).*'`" CMAKE_MAJOR_MINOR_VERSION=$CMAKE_MAJOR_VERSION.$CMAKE_MINOR_VERSION # # NOTE: the "64" in "Darwin64" doesn't mean "64-bit-only"; the # package in question supports both 32-bit and 64-bit x86. # case "$CMAKE_MAJOR_VERSION" in 0|1) echo "CMake $CMAKE_VERSION" is too old 1>&2 ;; 2) # # Download the DMG, run the installer. # [ -f cmake-$CMAKE_VERSION-Darwin64-universal.dmg ] || curl -L -O https://cmake.org/files/v$CMAKE_MAJOR_MINOR_VERSION/cmake-$CMAKE_VERSION-Darwin64-universal.dmg || exit 1 $no_build && echo "Skipping installation" && return sudo hdiutil attach cmake-$CMAKE_VERSION-Darwin64-universal.dmg || exit 1 sudo installer -target / -pkg /Volumes/cmake-$CMAKE_VERSION-Darwin64-universal/cmake-$CMAKE_VERSION-Darwin64-universal.pkg || exit 1 sudo hdiutil detach /Volumes/cmake-$CMAKE_VERSION-Darwin64-universal ;; 3) # # Download the DMG and do a drag install, where "drag" means # "mv". # # 3.0.* and 3.1.0 have a Darwin64-universal DMG. # 3.1.1 and later have a Darwin-x86_64 DMG. # Probably not many people are still developing on 32-bit # Macs, so we don't worry about them. # if [ "$CMAKE_MINOR_VERSION" = 0 -o \ "$CMAKE_VERSION" = 3.1.0 ]; then type="Darwin64-universal" else type="Darwin-x86_64" fi [ -f cmake-$CMAKE_VERSION-$type.dmg ] || curl -L -O https://cmake.org/files/v$CMAKE_MAJOR_MINOR_VERSION/cmake-$CMAKE_VERSION-$type.dmg || exit 1 $no_build && echo "Skipping installation" && return sudo hdiutil attach cmake-$CMAKE_VERSION-$type.dmg || exit 1 sudo ditto /Volumes/cmake-$CMAKE_VERSION-$type/CMake.app /Applications/CMake.app || exit 1 # # Plant the appropriate symbolic links in /usr/local/bin. # It's a drag-install, so there's no installer to make them, # and the CMake code to put them in place is lame, as # # 1) it defaults to /usr/bin, not /usr/local/bin; # 2) it doesn't request the necessary root privileges; # 3) it can't be run from the command line; # # so we do it ourselves. # for i in ccmake cmake cmake-gui cmakexbuild cpack ctest do sudo ln -s /Applications/CMake.app/Contents/bin/$i /usr/local/bin/$i done sudo hdiutil detach /Volumes/cmake-$CMAKE_VERSION-$type ;; *) ;; esac touch cmake-$CMAKE_VERSION-done fi } uninstall_cmake() { if [ ! -z "$installed_cmake_version" ]; then echo "Uninstalling CMake:" installed_cmake_major_version="`expr $installed_cmake_version : '\([0-9][0-9]*\).*'`" case "$installed_cmake_major_version" in 0|1) echo "CMake $installed_cmake_version" is too old 1>&2 ;; 2) sudo rm -rf "/Applications/CMake "`echo "$installed_cmake_version" | sed 's/\([0-9][0-9]*\)\.\([0-9][0-9]*\)\.\([0-9][0-9]*\).*/\1.\2-\3/'`.app for i in ccmake cmake cmake-gui cmakexbuild cpack ctest do sudo rm -f /usr/bin/$i /usr/local/bin/$i done sudo pkgutil --forget com.Kitware.CMake rm cmake-$installed_cmake_version-done ;; 3) sudo rm -rf /Applications/CMake.app for i in ccmake cmake cmake-gui cmakexbuild cpack ctest do sudo rm -f /usr/local/bin/$i done rm cmake-$installed_cmake_version-done ;; esac if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version, # whatever it might happen to be called. # rm -f cmake-$installed_cmake_version-Darwin64-universal.dmg rm -f cmake-$installed_cmake_version-Darwin-x86_64.dmg fi installed_cmake_version="" fi } install_gettext() { if [ ! -f gettext-$GETTEXT_VERSION-done ] ; then echo "Downloading, building, and installing GNU gettext:" [ -f gettext-$GETTEXT_VERSION.tar.gz ] || curl -L -O http://ftp.gnu.org/pub/gnu/gettext/gettext-$GETTEXT_VERSION.tar.gz || exit 1 $no_build && echo "Skipping installation" && return gzcat gettext-$GETTEXT_VERSION.tar.gz | tar xf - || exit 1 cd gettext-$GETTEXT_VERSION CFLAGS="$CFLAGS -D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch gettext-$GETTEXT_VERSION-done fi } uninstall_gettext() { if [ ! -z "$installed_gettext_version" ] ; then # # GLib depends on this, so uninstall it. # uninstall_glib "$@" echo "Uninstalling GNU gettext:" cd gettext-$installed_gettext_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm gettext-$installed_gettext_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf gettext-$installed_gettext_version rm -rf gettext-$installed_gettext_version.tar.gz fi installed_gettext_version="" fi } install_pkg_config() { if [ ! -f pkg-config-$PKG_CONFIG_VERSION-done ] ; then echo "Downloading, building, and installing pkg-config:" [ -f pkg-config-$PKG_CONFIG_VERSION.tar.gz ] || curl -L -O https://pkgconfig.freedesktop.org/releases/pkg-config-$PKG_CONFIG_VERSION.tar.gz || exit 1 $no_build && echo "Skipping installation" && return gzcat pkg-config-$PKG_CONFIG_VERSION.tar.gz | tar xf - || exit 1 cd pkg-config-$PKG_CONFIG_VERSION ./configure --with-internal-glib || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch pkg-config-$PKG_CONFIG_VERSION-done fi } uninstall_pkg_config() { if [ ! -z "$installed_pkg_config_version" ] ; then echo "Uninstalling pkg-config:" cd pkg-config-$installed_pkg_config_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm pkg-config-$installed_pkg_config_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf pkg-config-$installed_pkg_config_version rm -rf pkg-config-$installed_pkg_config_version.tar.gz fi installed_pkg_config_version="" fi } install_glib() { if [ ! -f glib-$GLIB_VERSION-done ] ; then echo "Downloading, building, and installing GLib:" glib_dir=`expr $GLIB_VERSION : '\([0-9][0-9]*\.[0-9][0-9]*\).*'` GLIB_MAJOR_VERSION="`expr $GLIB_VERSION : '\([0-9][0-9]*\).*'`" GLIB_MINOR_VERSION="`expr $GLIB_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`" GLIB_DOTDOT_VERSION="`expr $GLIB_VERSION : '[0-9][0-9]*\.[0-9][0-9]*\.\([0-9][0-9]*\).*'`" if [[ $GLIB_MAJOR_VERSION -gt 2 || ($GLIB_MAJOR_VERSION -eq 2 && $GLIB_MINOR_VERSION -gt 28) || ($GLIB_MAJOR_VERSION -eq 2 && $GLIB_MINOR_VERSION -eq 28 && $GLIB_DOTDOT_VERSION -ge 8) ]] then # # Starting with GLib 2.28.8, xz-compressed tarballs are available. # [ -f glib-$GLIB_VERSION.tar.xz ] || curl -L -O http://ftp.gnome.org/pub/gnome/sources/glib/$glib_dir/glib-$GLIB_VERSION.tar.xz || exit 1 $no_build && echo "Skipping installation" && return xzcat glib-$GLIB_VERSION.tar.xz | tar xf - || exit 1 else [ -f glib-$GLIB_VERSION.tar.bz2 ] || curl -L -O http://ftp.gnome.org/pub/gnome/sources/glib/$glib_dir/glib-$GLIB_VERSION.tar.bz2 || exit 1 $no_build && echo "Skipping installation" && return bzcat glib-$GLIB_VERSION.tar.bz2 | tar xf - || exit 1 fi cd glib-$GLIB_VERSION # # macOS ships with libffi, but doesn't provide its pkg-config file; # explicitly specify LIBFFI_CFLAGS and LIBFFI_LIBS, so the configure # script doesn't try to use pkg-config to get the appropriate # C flags and loader flags. # # And, what's worse, at least with the version of Xcode that comes # with Leopard, /usr/include/ffi/fficonfig.h doesn't define MACOSX, # which causes the build of GLib to fail. If we don't find # "#define.*MACOSX" in /usr/include/ffi/fficonfig.h, explicitly # define it. # # While we're at it, suppress -Wformat-nonliteral to avoid a case # where clang's stricter rules on when not to complain about # non-literal format arguments cause it to complain about code # that's safe but it wasn't told that. See my comment #25 in # GNOME bug 691608: # # https://bugzilla.gnome.org/show_bug.cgi?id=691608#c25 # # First, determine where the system include files are. (It's not # necessarily /usr/include.) There's a bit of a greasy hack here; # pre-5.x versions of the developer tools don't support the # --show-sdk-path option, and will produce no output, so includedir # will be set to /usr/include (in those older versions of the # developer tools, there is a /usr/include directory). # includedir=`xcrun --show-sdk-path 2>/dev/null`/usr/include if grep -qs '#define.*MACOSX' $includedir/ffi/fficonfig.h then # It's defined, nothing to do LIBFFI_CFLAGS="-I $includedir/ffi" LIBFFI_LIBS="-lffi" CFLAGS="$CFLAGS -Wno-format-nonliteral $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS -Wno-format-nonliteral $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1 else LIBFFI_CFLAGS="-I $includedir/ffi" LIBFFI_LIBS="-lffi" CFLAGS="$CFLAGS -DMACOSX -Wno-format-nonliteral $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS -DMACOSX -Wno-format-nonliteral $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1 fi # # Apply the fix to GNOME bug 529806: # # https://bugzilla.gnome.org/show_bug.cgi?id=529806 # # if we have a version of GLib prior to 2.30. # if [[ $GLIB_MAJOR_VERSION -eq 2 && $GLIB_MINOR_VERSION -le 30 ]] then patch -p0 <../../macosx-support-lib-patches/glib-gconvert.c.patch || exit 1 fi make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch glib-$GLIB_VERSION-done fi } uninstall_glib() { if [ ! -z "$installed_glib_version" ] ; then # # ATK, Pango, and GTK depend on this, so uninstall them. # uninstall_gtk uninstall_pango uninstall_atk echo "Uninstalling GLib:" cd glib-$installed_glib_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm glib-$installed_glib_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf glib-$installed_glib_version rm -rf glib-$installed_glib_version.tar.xz glib-$installed_glib_version.tar.bz2 fi installed_glib_version="" fi } install_qt() { if [ "$QT_VERSION" -a ! -f qt-$QT_VERSION-done ]; then echo "Downloading, building, and installing Qt:" # # What you get for this URL might just be a 302 Found reply, so use # -L so we get redirected. # if [ "$QT_MAJOR_VERSION" -ge 5 ] then QT_VOLUME=qt-opensource-mac-x64-clang-$QT_VERSION else QT_VOLUME=qt-opensource-mac-$QT_VERSION fi [ -f $QT_VOLUME.dmg ] || curl -L -O http://download.qt.io/archive/qt/$QT_MAJOR_MINOR_VERSION/$QT_MAJOR_MINOR_DOTDOT_VERSION/$QT_VOLUME.dmg || exit 1 $no_build && echo "Skipping installation" && return sudo hdiutil attach $QT_VOLUME.dmg || exit 1 if [ "$QT_MAJOR_VERSION" -ge 5 ] then # # Run the installer executable directly, so that we wait for # it to finish. Then unmount the volume. # /Volumes/$QT_VOLUME/$QT_VOLUME.app/Contents/MacOS/$QT_VOLUME sudo hdiutil detach /Volumes/$QT_VOLUME else # # Open the installer package; use -W, so that we wait for # the installer to finish. Then unmount the volume. # open -W "/Volumes/Qt $QT_MAJOR_MINOR_DOTDOT_VERSION/Qt.mpkg" sudo hdiutil detach "/Volumes/Qt $QT_MAJOR_MINOR_DOTDOT_VERSION" fi # # Versions 5.3.x through 5.5.0, at least, have bogus .pc files. # See bugs QTBUG-35256 and QTBUG-47162. # # Fix the files. # for i in $HOME/Qt$QT_VERSION/$QT_MAJOR_MINOR_VERSION/clang_64/lib/pkgconfig/*.pc do ed - $i <&2 exit 1 fi echo "Downloading, building, and installing libgcrypt:" [ -f libgcrypt-$LIBGCRYPT_VERSION.tar.gz ] || curl -L -O ftp://ftp.gnupg.org/gcrypt/libgcrypt/libgcrypt-$LIBGCRYPT_VERSION.tar.gz || exit 1 $no_build && echo "Skipping installation" && return gzcat libgcrypt-$LIBGCRYPT_VERSION.tar.gz | tar xf - || exit 1 cd libgcrypt-$LIBGCRYPT_VERSION # # The assembler language code is not compatible with the macOS # x86 assembler (or is it an x86-64 vs. x86-32 issue?). # # libgcrypt expects gnu89, not c99/gnu99, semantics for # "inline". See, for example: # # http://lists.freebsd.org/pipermail/freebsd-ports-bugs/2010-October/198809.html # CFLAGS="$CFLAGS -std=gnu89 $VERSION_MIN_FLAGS $SDKFLAGS" CFLAGS="$CFLAGS -std=gnu89 $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --disable-asm || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch libgcrypt-$LIBGCRYPT_VERSION-done fi } uninstall_libgcrypt() { if [ ! -z "$installed_libgcrypt_version" ] ; then echo "Uninstalling libgcrypt:" cd libgcrypt-$installed_libgcrypt_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm libgcrypt-$installed_libgcrypt_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf libgcrypt-$installed_libgcrypt_version rm -rf libgcrypt-$installed_libgcrypt_version.tar.gz fi installed_libgcrypt_version="" fi } install_gmp() { if [ "$GMP_VERSION" -a ! -f gmp-$GMP_VERSION-done ] ; then echo "Downloading, building, and installing GMP:" [ -f gmp-$GMP_VERSION.tar.lz ] || curl -L -O https://gmplib.org/download/gmp/gmp-$GMP_VERSION.tar.lz || exit 1 $no_build && echo "Skipping installation" && return lzip -c -d gmp-$GMP_VERSION.tar.lz | tar xf - || exit 1 cd gmp-$GMP_VERSION CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --with-libgcrypt --without-p11-kit || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch gmp-$GMP_VERSION-done fi } uninstall_gmp() { if [ ! -z "$installed_gmp_version" ] ; then # # Nettle depends on this, so uninstall it. # uninstall_nettle "$@" echo "Uninstalling GMP:" cd gmp-$installed_gmp_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm gmp-$installed_gmp_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf gmp-$installed_gmp_version rm -rf gmp-$installed_gmp_version.tar.lz fi installed_gmp_version="" fi } install_nettle() { if [ "$NETTLE_VERSION" -a ! -f nettle-$NETTLE_VERSION-done ] ; then echo "Downloading, building, and installing Nettle:" [ -f nettle-$NETTLE_VERSION.tar.gz ] || curl -L -O https://ftp.gnu.org/gnu/nettle/nettle-$NETTLE_VERSION.tar.gz || exit 1 $no_build && echo "Skipping installation" && return gzcat nettle-$NETTLE_VERSION.tar.gz | tar xf - || exit 1 cd nettle-$NETTLE_VERSION CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --with-libgcrypt --without-p11-kit || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch nettle-$NETTLE_VERSION-done fi } uninstall_nettle() { if [ ! -z "$installed_nettle_version" ] ; then # # GnuTLS depends on this, so uninstall it. # uninstall_gnutls "$@" echo "Uninstalling Nettle:" cd nettle-$installed_nettle_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm nettle-$installed_nettle_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf nettle-$installed_nettle_version rm -rf nettle-$installed_nettle_version.tar.gz fi installed_nettle_version="" fi } install_gnutls() { if [ "$GNUTLS_VERSION" -a ! -f gnutls-$GNUTLS_VERSION-done ] ; then # # GnuTLS requires Nettle. # if [ -z $NETTLE_VERSION ] then echo "GnuTLS requires Nettle, but you didn't install Nettle" 1>&2 exit 1 fi echo "Downloading, building, and installing GnuTLS:" if [[ $GNUTLS_MAJOR_VERSION -ge 3 ]] then # # Starting with GnuTLS 3.x, the tarballs are compressed with # xz rather than bzip2. # [ -f gnutls-$GNUTLS_VERSION.tar.xz ] || curl -L -O https://www.gnupg.org/ftp/gcrypt/gnutls/v$GNUTLS_MAJOR_VERSION.$GNUTLS_MINOR_VERSION/gnutls-$GNUTLS_VERSION.tar.xz || exit 1 $no_build && echo "Skipping installation" && return xzcat gnutls-$GNUTLS_VERSION.tar.xz | tar xf - || exit 1 else [ -f gnutls-$GNUTLS_VERSION.tar.bz2 ] || curl -L -O https://www.gnupg.org/ftp/gcrypt/gnutls/v$GNUTLS_MAJOR_VERSION.$GNUTLS_MINOR_VERSION/gnutls-$GNUTLS_VERSION.tar.bz2 || exit 1 $no_build && echo "Skipping installation" && return bzcat gnutls-$GNUTLS_VERSION.tar.bz2 | tar xf - || exit 1 fi cd gnutls-$GNUTLS_VERSION CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --with-included-libtasn1 --with-included-unistring --without-p11-kit || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch gnutls-$GNUTLS_VERSION-done fi } uninstall_gnutls() { if [ ! -z "$installed_gnutls_version" ] ; then echo "Uninstalling GnuTLS:" cd gnutls-$installed_gnutls_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm gnutls-$installed_gnutls_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf gnutls-$installed_gnutls_version rm -rf gnutls-$installed_gnutls_version.tar.bz2 fi installed_gnutls_version="" fi } install_lua() { if [ "$LUA_VERSION" -a ! -f lua-$LUA_VERSION-done ] ; then echo "Downloading, building, and installing Lua:" [ -f lua-$LUA_VERSION.tar.gz ] || curl -L -O http://www.lua.org/ftp/lua-$LUA_VERSION.tar.gz || exit 1 $no_build && echo "Skipping installation" && return gzcat lua-$LUA_VERSION.tar.gz | tar xf - || exit 1 cd lua-$LUA_VERSION make MYCFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" MYLDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" $MAKE_BUILD_OPTS macosx || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch lua-$LUA_VERSION-done fi } uninstall_lua() { if [ ! -z "$installed_lua_version" ] ; then echo "Uninstalling Lua:" # # Lua has no "make uninstall", so just remove stuff manually. # There's no configure script, so there's no need for # "make distclean", either; just do "make clean". # (cd /usr/local/bin; $DO_RM -f lua luac) (cd /usr/local/include; $DO_RM -f lua.h luaconf.h lualib.h lauxlib.h lua.hpp) (cd /usr/local/lib; $DO_RM -f liblua.a) (cd /usr/local/man/man1; $DO_RM -f lua.1 luac.1) cd lua-$installed_lua_version make clean || exit 1 cd .. rm lua-$installed_lua_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf lua-$installed_lua_version rm -rf lua-$installed_lua_version.tar.gz fi installed_lua_version="" fi } install_portaudio() { # # Check for both the old versionless portaudio-done and the new # versioned -done file. # if [ "$PORTAUDIO_VERSION" -a ! -f portaudio-$PORTAUDIO_VERSION-done ] ; then echo "Downloading, building, and installing PortAudio:" [ -f $PORTAUDIO_VERSION.tgz ] || curl -L -O http://www.portaudio.com/archives/$PORTAUDIO_VERSION.tgz || exit 1 $no_build && echo "Skipping installation" && return gzcat $PORTAUDIO_VERSION.tgz | tar xf - || exit 1 cd portaudio # # Un-comment an include that's required on Lion. # patch -p0 include/pa_mac_core.h <../../macosx-support-lib-patches/portaudio-pa_mac_core.h.patch # # Fix a bug that showed up with clang (but is a bug with any # compiler). # patch -p0 src/hostapi/coreaudio/pa_mac_core.c <../../macosx-support-lib-patches/portaudio-pa_mac_core.c.patch # # Disable fat builds - the configure script doesn't work right # with Xcode 4 if you leave them enabled, and we don't build # any other libraries fat (GLib, for example, would be very # hard to build fat), so there's no advantage to having PortAudio # built fat. # # Set the minimum macOS version to 10.4, to suppress some # deprecation warnings. (Good luck trying to make any of # this build on an OS+Xcode with a pre-10.4 SDK; we don't # worry about the user requesting that.) # # Explicitly disable deprecation, so the damn thing will build # on El Capitan with Xcode 7. # CFLAGS="$CFLAGS -Wno-deprecated-declarations -mmacosx-version-min=10.4 $SDKFLAGS" CXXFLAGS="$CXXFLAGS -mmacosx-version-min=10.4 $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --disable-mac-universal || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch portaudio-$PORTAUDIO_VERSION-done fi } uninstall_portaudio() { if [ ! -z "$installed_portaudio_version" ] ; then echo "Uninstalling PortAudio:" cd portaudio $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm portaudio-$installed_portaudio_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf portaudio rm -rf $installed_portaudio_version.tgz fi installed_portaudio_version="" fi } install_snappy() { if [ "$SNAPPY_VERSION" -a ! -f snappy-$SNAPPY_VERSION-done ] ; then echo "Downloading, building, and installing snappy:" [ -f snappy-$SNAPPY_VERSION.tar.gz ] || curl -L -O https://github.com/google/snappy/releases/download/$SNAPPY_VERSION/snappy-$SNAPPY_VERSION.tar.gz || exit 1 $no_build && echo "Skipping installation" && return gzcat snappy-$SNAPPY_VERSION.tar.gz | tar xf - || exit 1 cd snappy-$SNAPPY_VERSION CFLAGS="$CFLAGS -D_FORTIFY_SOURCE=0" ./configure || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch snappy-$SNAPPY_VERSION-done fi } uninstall_snappy() { if [ ! -z "$installed_snappy_version" ] ; then echo "Uninstalling snappy:" cd snappy-$installed_snappy_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm snappy-$installed_snappy_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf snappy-$installed_snappy_version rm -rf snappy-$installed_snappy_version.tar.gz fi installed_snappy_version="" fi } install_libxml2() { if [ "$LIBXML2_VERSION" -a ! -f libxml2-$LIBXML2_VERSION-done ] ; then echo "Downloading, building, and installing libxml2:" [ -f libxml2-$LIBXML2_VERSION.tar.gz ] || curl -L -O ftp://xmlsoft.org/libxml2/libxml2-$LIBXML2_VERSION.tar.gz || exit 1 $no_build && echo "Skipping installation" && return gzcat libxml2-$LIBXML2_VERSION.tar.gz | tar xf - || exit 1 cd libxml2-$LIBXML2_VERSION CFLAGS="$CFLAGS -D_FORTIFY_SOURCE=0" ./configure || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch libxml2-$LIBXML2_VERSION-done fi } uninstall_libxml2() { if [ ! -z "$installed_libxml2_version" ] ; then echo "Uninstalling libxml2:" cd libxml2-$installed_libxml2_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm libxml2-$installed_libxml2_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf libxml2-$installed_libxml2_version rm -rf libxml2-$installed_libxml2_version.tar.gz fi installed_libxml2_version="" fi } install_lz4() { if [ "$LZ4_VERSION" -a ! -f lz4-$LZ4_VERSION-done ] ; then echo "Downloading, building, and installing lz4:" [ -f lz4-$LZ4_VERSION.tar.gz ] || curl -L -o lz4-$LZ4_VERSION.tar.gz https://github.com/lz4/lz4/archive/$LZ4_VERSION.tar.gz || exit 1 $no_build && echo "Skipping installation" && return gzcat lz4-$LZ4_VERSION.tar.gz | tar xf - || exit 1 cd lz4-$LZ4_VERSION # CFLAGS="$CFLAGS -D_FORTIFY_SOURCE=0" ./configure || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch lz4-$LZ4_VERSION-done fi } uninstall_lz4() { if [ ! -z "$installed_lz4_version" ] ; then echo "Uninstalling lz4:" cd lz4-$installed_lz4_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm lz4-$installed_lz4_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf lz4-$installed_lz4_version rm -rf lz4-$installed_lz4_version.tar.gz fi installed_lz4_version="" fi } install_sbc() { if [ "$SBC_VERSION" -a ! -f sbc-$SBC_VERSION-done ] ; then echo "Downloading, building, and installing sbc:" [ -f sbc-$SBC_VERSION.tar.gz ] || curl -L -O https://www.kernel.org/pub/linux/bluetooth/sbc-$SBC_VERSION.tar.gz || exit 1 $no_build && echo "Skipping installation" && return gzcat sbc-$SBC_VERSION.tar.gz | tar xf - || exit 1 cd sbc-$SBC_VERSION CFLAGS="$CFLAGS -D_FORTIFY_SOURCE=0" ./configure --disable-tools --disable-tester --disable-shared || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch sbc-$SBC_VERSION-done fi } uninstall_sbc() { if [ ! -z "$installed_sbc_version" ] ; then echo "Uninstalling sbc:" cd sbc-$installed_sbc_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm sbc-$installed_sbc_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf sbc-$installed_sbc_version rm -rf sbc-$installed_sbc_version.tar.gz fi installed_sbc_version="" fi } install_geoip() { if [ "$GEOIP_VERSION" -a ! -f geoip-$GEOIP_VERSION-done ] ; then echo "Downloading, building, and installing GeoIP API:" GEOIP_MAJOR_VERSION="`expr $GEOIP_VERSION : '\([0-9][0-9]*\).*'`" GEOIP_MINOR_VERSION="`expr $GEOIP_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`" GEOIP_DOTDOT_VERSION="`expr $GEOIP_VERSION : '[0-9][0-9]*\.[0-9][0-9]*\.\([0-9][0-9]*\).*'`" if [[ $GEOIP_MAJOR_VERSION -gt 1 || ($GEOIP_MAJOR_VERSION -eq 1 && $GEOIP_MINOR_VERSION -gt 6) || ($GEOIP_MAJOR_VERSION -eq 1 && $GEOIP_MINOR_VERSION -eq 6 && $GEOIP_DOTDOT_VERSION -ge 1) ]] then # # Starting with GeoIP 1.6.1, the tarballs are on GitHub. # [ -f GeoIP-$GEOIP_VERSION.tar.gz ] || curl -L -O https://github.com/maxmind/geoip-api-c/releases/download/v$GEOIP_VERSION/GeoIP-$GEOIP_VERSION.tar.gz || exit 1 else [ -f GeoIP-$GEOIP_VERSION.tar.gz ] || curl -L -O http://geolite.maxmind.com/download/geoip/api/c/GeoIP-$GEOIP_VERSION.tar.gz || exit 1 fi $no_build && echo "Skipping installation" && return gzcat GeoIP-$GEOIP_VERSION.tar.gz | tar xf - || exit 1 cd GeoIP-$GEOIP_VERSION CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1 # # Grr. Their man pages "helpfully" have an ISO 8859-1 # copyright symbol in the copyright notice, but macOS's # default character encoding is UTF-8. sed on Mountain # Lion barfs at the "illegal character sequence" represented # by an ISO 8859-1 copyright symbol, as it's not a valid # UTF-8 sequence. # # iconv the relevant man pages into UTF-8. # for i in geoipupdate.1.in geoiplookup6.1.in geoiplookup.1.in do iconv -f iso8859-1 -t utf-8 man/"$i" >man/"$i".tmp && mv man/"$i".tmp man/"$i" done make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch geoip-$GEOIP_VERSION-done fi } uninstall_geoip() { if [ ! -z "$installed_geoip_version" ] ; then echo "Uninstalling GeoIP API:" cd GeoIP-$installed_geoip_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm geoip-$installed_geoip_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf GeoIP-$installed_geoip_version rm -rf GeoIP-$installed_geoip_version.tar.gz fi installed_geoip_version="" fi } install_c_ares() { if [ "$CARES_VERSION" -a ! -f c-ares-$CARES_VERSION-done ] ; then echo "Downloading, building, and installing C-Ares API:" [ -f c-ares-$CARES_VERSION.tar.gz ] || curl -L -O https://c-ares.haxx.se/download/c-ares-$CARES_VERSION.tar.gz || exit 1 $no_build && echo "Skipping installation" && return gzcat c-ares-$CARES_VERSION.tar.gz | tar xf - || exit 1 cd c-ares-$CARES_VERSION CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch c-ares-$CARES_VERSION-done fi } uninstall_c_ares() { if [ ! -z "$installed_cares_version" ] ; then echo "Uninstalling C-Ares API:" cd c-ares-$installed_cares_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm c-ares-$installed_cares_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf c-ares-$installed_cares_version rm -rf c-ares-$installed_cares_version.tar.gz fi installed_cares_version="" fi } install_libssh() { if [ "$LIBSSH_VERSION" -a ! -f libssh-$LIBSSH_VERSION-done ] ; then echo "Downloading, building, and installing libssh:" [ -f libssh-$LIBSSH_VERSION.tar.xz ] || curl -L -O https://red.libssh.org/attachments/download/195/libssh-$LIBSSH_VERSION.tar.xz || exit 1 $no_build && echo "Skipping installation" && return xzcat libssh-$LIBSSH_VERSION.tar.xz | tar xf - || exit 1 cd libssh-$LIBSSH_VERSION mkdir build cd build CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" cmake -DWITH_GCRYPT=1 ../ || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd ../.. touch libssh-$LIBSSH_VERSION-done fi } uninstall_libssh() { if [ ! -z "$installed_libssh_version" ] ; then echo "Sadly, libssh uses cmake, and doesn't support uninstall." fi } install_nghttp2() { if [ "$NGHTTP2_VERSION" -a ! -f nghttp2-$NGHTTP2_VERSION-done ] ; then echo "Downloading, building, and installing nghttp2:" [ -f nghttp2-$NGHTTP2_VERSION.tar.xz ] || curl -L -O https://github.com/nghttp2/nghttp2/releases/download/v$NGHTTP2_VERSION/nghttp2-$NGHTTP2_VERSION.tar.xz || exit 1 $no_build && echo "Skipping installation" && return xzcat nghttp2-$NGHTTP2_VERSION.tar.xz | tar xf - || exit 1 cd nghttp2-$NGHTTP2_VERSION ./configure || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch nghttp2-$NGHTTP2_VERSION-done fi } uninstall_nghttp2() { if [ ! -z "$installed_nghttp2_version" ] ; then echo "Uninstalling nghttp2:" cd nghttp2-$installed_nghttp2_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm nghttp2-$installed_nghttp2_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf nghttp2-$installed_nghttp2_version rm -rf nghttp2-$installed_nghttp2_version.tar.xz fi installed_nghttp2_version="" fi } install_all() { # # Check whether the versions we have installed are the versions # requested; if not, uninstall the installed versions. # if [ ! -z "$installed_nghttp2_version" -a \ "$installed_nghttp2_version" != "$NGHTTP2_VERSION" ] ; then echo "Installed nghttp2 version is $installed_nghttp2_version" if [ -z "$NGHTTP2_VERSION" ] ; then echo "nghttp2 is not requested" else echo "Requested nghttp2 version is $NGHTTP2_VERSION" fi uninstall_nghttp2 -r fi if [ ! -z "$installed_libssh_version" -a \ "$installed_libssh_version" != "$LIBSSH_VERSION" ] ; then echo "Installed libssh version is $installed_libssh_version" if [ -z "$LIBSSH_VERSION" ] ; then echo "libssh is not requested" else echo "Requested libssh version is $LIBSSH_VERSION" fi uninstall_libssh -r fi if [ ! -z "$installed_cares_version" -a \ "$installed_cares_version" != "$CARES_VERSION" ] ; then echo "Installed C-Ares version is $installed_cares_version" if [ -z "$CARES_VERSION" ] ; then echo "C-Ares is not requested" else echo "Requested C-Ares version is $CARES_VERSION" fi uninstall_c_ares -r fi if [ ! -z "$installed_geoip_version" -a \ "$installed_geoip_version" != "$GEOIP_VERSION" ] ; then echo "Installed GeoIP API version is $installed_geoip_version" if [ -z "$GEOIP_VERSION" ] ; then echo "GeoIP is not requested" else echo "Requested GeoIP version is $GEOIP_VERSION" fi uninstall_geoip -r fi if [ ! -z "$installed_sbc_version" -a \ "$installed_sbc_version" != "$SBC_VERSION" ] ; then echo "Installed SBC version is $installed_sbc_version" if [ -z "$SBC_VERSION" ] ; then echo "SBC is not requested" else echo "Requested SBC version is $SBC_VERSION" fi uninstall_sbc -r fi if [ ! -z "$installed_lz4_version" -a \ "$installed_lz4_version" != "$LZ4_VERSION" ] ; then echo "Installed LZ4 version is $installed_lz4_version" if [ -z "$LZ4_VERSION" ] ; then echo "LZ4 is not requested" else echo "Requested LZ4 version is $LZ4_VERSION" fi uninstall_lz4 -r fi if [ ! -z "$installed_libxml2_version" -a \ "$installed_libxml2_version" != "$LIBXML2_VERSION" ] ; then echo "Installed libxml2 version is $installed_libxml2_version" if [ -z "$LIBXML2_VERSION" ] ; then echo "libxml2 is not requested" else echo "Requested libxml2 version is $LIBXML2_VERSION" fi uninstall_libxml2 -r fi if [ ! -z "$installed_snappy_version" -a \ "$installed_snappy_version" != "$SNAPPY_VERSION" ] ; then echo "Installed SNAPPY version is $installed_snappy_version" if [ -z "$SNAPPY_VERSION" ] ; then echo "SNAPPY is not requested" else echo "Requested SNAPPY version is $SNAPPY_VERSION" fi uninstall_snappy -r fi if [ ! -z "$installed_portaudio_version" -a \ "$installed_portaudio_version" != "$PORTAUDIO_VERSION" ] ; then echo "Installed PortAudio version is $installed_portaudio_version" if [ -z "$PORTAUDIO_VERSION" ] ; then echo "PortAudio is not requested" else echo "Requested PortAudio version is $PORTAUDIO_VERSION" fi uninstall_portaudio -r fi if [ ! -z "$installed_lua_version" -a \ "$installed_lua_version" != "$LUA_VERSION" ] ; then echo "Installed Lua version is $installed_lua_version" if [ -z "$LUA_VERSION" ] ; then echo "Lua is not requested" else echo "Requested Lua version is $LUA_VERSION" fi uninstall_lua -r fi if [ ! -z "$installed_gnutls_version" -a \ "$installed_gnutls_version" != "$GNUTLS_VERSION" ] ; then echo "Installed GnuTLS version is $installed_gnutls_version" if [ -z "$GNUTLS_VERSION" ] ; then echo "GnuTLS is not requested" else echo "Requested GnuTLS version is $GNUTLS_VERSION" fi uninstall_gnutls -r fi if [ ! -z "$installed_nettle_version" -a \ "$installed_nettle_version" != "$NETTLE_VERSION" ] ; then echo "Installed Nettle version is $installed_nettle_version" if [ -z "$NETTLE_VERSION" ] ; then echo "Nettle is not requested" else echo "Requested Nettle version is $NETTLE_VERSION" fi uninstall_nettle -r fi if [ ! -z "$installed_gmp_version" -a \ "$installed_gmp_version" != "$GMP_VERSION" ] ; then echo "Installed GMP version is $installed_gmp_version" if [ -z "$GMP_VERSION" ] ; then echo "GMP is not requested" else echo "Requested GMP version is $GMP_VERSION" fi uninstall_gmp -r fi if [ ! -z "$installed_libgcrypt_version" -a \ "$installed_libgcrypt_version" != "$LIBGCRYPT_VERSION" ] ; then echo "Installed libgcrypt version is $installed_libgcrypt_version" if [ -z "$LIBGCRYPT_VERSION" ] ; then echo "libgcrypt is not requested" else echo "Requested libgcrypt version is $LIBGCRYPT_VERSION" fi uninstall_libgcrypt -r fi if [ ! -z "$installed_libgpg_error_version" -a \ "$installed_libgpg_error_version" != "$LIBGPG_ERROR_VERSION" ] ; then echo "Installed libgpg-error version is $installed_libgpg_error_version" if [ -z "$LIBGPG_ERROR_VERSION" ] ; then echo "libgpg-error is not requested" else echo "Requested libgpg-error version is $LIBGPG_ERROR_VERSION" fi uninstall_libgpg_error -r fi if [ ! -z "$installed_libsmi_version" -a \ "$installed_libsmi_version" != "$LIBSMI_VERSION" ] ; then echo "Installed libsmi version is $installed_libsmi_version" if [ -z "$LIBSMI_VERSION" ] ; then echo "libsmi is not requested" else echo "Requested libsmi version is $LIBSMI_VERSION" fi uninstall_libsmi -r fi if [ ! -z "$installed_gtk_version" -a \ "$installed_gtk_version" != "$GTK_VERSION" ] ; then echo "Installed GTK+ version is $installed_gtk_version" if [ -z "$GTK_VERSION" ] ; then echo "GTK+ is not requested" else echo "Requested GTK+ version is $GTK_VERSION" fi uninstall_gtk -r fi if [ ! -z "$installed_gdk_pixbuf_version" -a \ "$installed_gdk_pixbuf_version" != "$GDK_PIXBUF_VERSION" ] ; then echo "Installed gdk-pixbuf version is $installed_gdk_pixbuf_version" if [ -z "$GDK_PIXBUF_VERSION" ] ; then echo "gdk-pixbuf is not requested" else echo "Requested gdk-pixbuf version is $GDK_PIXBUF_VERSION" fi uninstall_gdk_pixbuf -r fi if [ ! -z "$installed_pango_version" -a \ "$installed_pango_version" != "$PANGO_VERSION" ] ; then echo "Installed Pango version is $installed_pango_version" if [ -z "$PANGO_VERSION" ] ; then echo "Pango is not requested" else echo "Requested Pango version is $PANGO_VERSION" fi uninstall_pango -r fi if [ ! -z "$installed_atk_version" -a \ "$installed_atk_version" != "$ATK_VERSION" ] ; then echo "Installed ATK version is $installed_atk_version" if [ -z "$ATK_VERSION" ] ; then echo "ATK is not requested" else echo "Requested ATK version is $ATK_VERSION" fi uninstall_atk -r fi if [ ! -z "$installed_cairo_version" -a \ "$installed_cairo_version" != "$CAIRO_VERSION" ] ; then echo "Installed Cairo version is $installed_cairo_version" if [ -z "$CAIRO_VERSION" ] ; then echo "Cairo is not requested" else echo "Requested Cairo version is $CAIRO_VERSION" fi uninstall_cairo -r fi if [ ! -z "$installed_pixman_version" -a \ "$installed_pixman_version" != "$PIXMAN_VERSION" ] ; then echo "Installed pixman version is $installed_pixman_version" if [ -z "$PIXMAN_VERSION" ] ; then echo "pixman is not requested" else echo "Requested pixman version is $PIXMAN_VERSION" fi uninstall_pixman -r fi if [ ! -z "$installed_libpng_version" -a \ "$installed_libpng_version" != "$PNG_VERSION" ] ; then echo "Installed libpng version is $installed_libpng_version" if [ -z "$PNG_VERSION" ] ; then echo "libpng is not requested" else echo "Requested libpng version is $PNG_VERSION" fi uninstall_libpng -r fi if [ ! -z "$installed_qt_version" -a \ "$installed_qt_version" != "$QT_VERSION" ] ; then echo "Installed Qt version is $installed_qt_version" if [ -z "$QT_VERSION" ] ; then echo "Qt is not requested" else echo "Requested Qt version is $QT_VERSION" fi uninstall_qt -r fi if [ ! -z "$installed_glib_version" -a \ "$installed_glib_version" != "$GLIB_VERSION" ] ; then echo "Installed GLib version is $installed_glib_version" if [ -z "$GLIB_VERSION" ] ; then echo "GLib is not requested" else echo "Requested GLib version is $GLIB_VERSION" fi uninstall_glib -r fi if [ ! -z "$installed_pkg_config_version" -a \ "$installed_pkg_config_version" != "$PKG_CONFIG_VERSION" ] ; then echo "Installed pkg-config version is $installed_pkg_config_version" if [ -z "$PKG_CONFIG_VERSION" ] ; then echo "pkg-config is not requested" else echo "Requested pkg-config version is $PKG_CONFIG_VERSION" fi uninstall_pkg_config -r fi if [ ! -z "$installed_gettext_version" -a \ "$installed_gettext_version" != "$GETTEXT_VERSION" ] ; then echo "Installed GNU gettext version is $installed_gettext_version" if [ -z "$GETTEXT_VERSION" ] ; then echo "GNU gettext is not requested" else echo "Requested GNU gettext version is $GETTEXT_VERSION" fi uninstall_gettext -r fi if [ ! -z "$installed_cmake_version" -a \ "$installed_cmake_version" != "$CMAKE_VERSION" ] ; then echo "Installed CMake version is $installed_cmake_version" if [ -z "$CMAKE_VERSION" ] ; then echo "CMake is not requested" else echo "Requested CMake version is $CMAKE_VERSION" fi # # XXX - really remove this? # Or should we remember it as installed only if this script # installed it? # uninstall_cmake -r fi if [ ! -z "$installed_libtool_version" -a \ "$installed_libtool_version" != "$LIBTOOL_VERSION" ] ; then echo "Installed GNU libtool version is $installed_libtool_version" if [ -z "$LIBTOOL_VERSION" ] ; then echo "GNU libtool is not requested" else echo "Requested GNU libtool version is $LIBTOOL_VERSION" fi uninstall_libtool -r fi if [ ! -z "$installed_automake_version" -a \ "$installed_automake_version" != "$AUTOMAKE_VERSION" ] ; then echo "Installed GNU automake version is $installed_automake_version" if [ -z "$AUTOMAKE_VERSION" ] ; then echo "GNU automake is not requested" else echo "Requested GNU automake version is $AUTOMAKE_VERSION" fi uninstall_automake -r fi if [ ! -z "$installed_autoconf_version" -a \ "$installed_autoconf_version" != "$AUTOCONF_VERSION" ] ; then echo "Installed GNU autoconf version is $installed_autoconf_version" if [ -z "$AUTOCONF_VERSION" ] ; then echo "GNU autoconf is not requested" else echo "Requested GNU autoconf version is $AUTOCONF_VERSION" fi uninstall_autoconf -r fi if [ ! -z "$installed_lzip_version" -a \ "$installed_lzip_version" != "$LZIP_VERSION" ] ; then echo "Installed lzip version is $installed_lzip_version" if [ -z "$LZIP_VERSION" ] ; then echo "lzip is not requested" else echo "Requested lzip version is $LZIP_VERSION" fi uninstall_lzip -r fi if [ ! -z "$installed_xz_version" -a \ "$installed_xz_version" != "$XZ_VERSION" ] ; then echo "Installed xz version is $installed_xz_version" if [ -z "$XZ_VERSION" ] ; then echo "xz is not requested" else echo "Requested xz version is $XZ_VERSION" fi uninstall_xz -r fi # # Start with xz: It is the sole download format of glib later than 2.31.2 # install_xz install_lzip install_autoconf install_automake install_libtool install_cmake # # Start with GNU gettext; GLib requires it, and macOS doesn't have it # or a BSD-licensed replacement. # # At least on Lion with Xcode 4, _FORTIFY_SOURCE gets defined as 2 # by default, which causes, for example, stpncpy to be defined as # a hairy macro that collides with the GNU gettext configure script's # attempts to workaround AIX's lack of a declaration for stpncpy, # with the result being a huge train wreck. Define _FORTIFY_SOURCE # as 0 in an attempt to keep the trains on separate tracks. # install_gettext # # GLib depends on pkg-config. # By default, pkg-config depends on GLib; we break the dependency cycle # by configuring pkg-config to use its own internal version of GLib. # install_pkg_config install_glib # # Now we have reached a point where we can build everything but # the GUI (Wireshark). # install_qt if [ "$GTK_VERSION" ]; then # # GTK+ 3 requires a newer Cairo build than the one that comes with # 10.6, so we build Cairo if we are using GTK+ 3. # # In 10.6 and 10.7, it's an X11 library; if we build with "native" GTK+ # rather than X11 GTK+, we might have to build and install Cairo. # In 10.8 and later, there is no X11, but it's included in Xquartz; # again, if we build with "native" GTK+, we'd have to build and install # it. # if [[ "$GTK_MAJOR_VERSION" -eq 3 || "$cairo_not_in_the_os" = yes ]]; then # # Requirements for Cairo first # # The libpng that comes with the X11 for Leopard has a bogus # pkg-config file that lies about where the header files are, # which causes other packages not to be able to find its # headers. # # The libpng in later versions is not what the version of # libpixman we build below wants - it wants libpng15. # install_libpng # # The libpixman versions that come with the X11s for Leopard, # Snow Leopard, and Lion is too old to support Cairo's image # surface backend feature (which requires pixman-1 >= 0.22.0). # # XXX - what about the one that comes with the latest version # of Xquartz? # install_pixman # # And now Cairo itself. # XXX - with the libxcb that comes with 10.6, # xcb_discard_reply() is missing, and the build fails. # install_cairo fi install_atk install_pango install_gdk_pixbuf install_gtk fi # # Now we have reached a point where we can build everything including # the GUI (Wireshark), but not with any optional features such as # SNMP OID resolution, some forms of decryption, Lua scripting, playback # of audio, or GeoIP mapping of IP addresses. # # We now conditionally download optional libraries to support them; # the default is to download them all. # install_libsmi install_libgpg_error install_libgcrypt install_gmp install_nettle install_gnutls install_lua install_portaudio install_snappy install_libxml2 install_lz4 install_sbc install_geoip install_c_ares install_libssh install_nghttp2 } uninstall_all() { if [ -d macosx-support-libs ] then cd macosx-support-libs # # Uninstall items in the reverse order from the order in which they're # installed. Only uninstall if the download/build/install process # completed; uninstall the version that appears in the name of # the -done file. # # We also do a "make distclean", so that we don't have leftovers from # old configurations. # uninstall_nghttp2 uninstall_libssh uninstall_c_ares uninstall_geoip uninstall_portaudio uninstall_snappy uninstall_libxml2 uninstall_lz4 uninstall_sbc uninstall_lua uninstall_gnutls uninstall_nettle uninstall_gmp uninstall_libgcrypt uninstall_libgpg_error uninstall_libsmi uninstall_gtk uninstall_gdk_pixbuf uninstall_pango uninstall_atk uninstall_cairo uninstall_pixman uninstall_libpng uninstall_qt uninstall_glib uninstall_pkg_config uninstall_gettext # # XXX - really remove this? # Or should we remember it as installed only if this script # installed it? # uninstall_cmake uninstall_libtool uninstall_automake uninstall_autoconf uninstall_lzip uninstall_xz fi } # # Do we have permission to write in /usr/local? # # If so, assume we have permission to write in its subdirectories. # (If that's not the case, this test needs to check the subdirectories # as well.) # # If not, do "make install", "make uninstall", the removes for Lua, # and the renames of [g]libtool* with sudo. # if [ -w /usr/local ] then DO_MAKE_INSTALL="make install" DO_MAKE_UNINSTALL="make uninstall" DO_RM="rm" DO_MV="mv" else DO_MAKE_INSTALL="sudo make install" DO_MAKE_UNINSTALL="sudo make uninstall" DO_RM="sudo rm" DO_MV="sudo mv" fi # # If we have SDKs available, the default target OS is the major version # of the one we're running; get that and strip off the third component # if present. # for i in /Developer/SDKs \ /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs \ /Library/Developer/CommandLineTools/SDKs do if [ -d "$i" ] then min_osx_target=`sw_vers -productVersion | sed 's/\([0-9]*\)\.\([0-9]*\)\.[0-9]*/\1.\2/'` # # That's also the OS whose SDK we'd be using. # sdk_target=$min_osx_target break fi done # # Parse command-line flags: # # -h - print help. # -t - build libraries so that they'll work on the specified # version of macOS and later versions. # -u - do an uninstall. # -n - download all packages, but don't build or install. # no_build=false while getopts ht:un name do case $name in u) do_uninstall=yes ;; n) no_build=true ;; t) min_osx_target="$OPTARG" ;; h|?) echo "Usage: macosx-setup.sh [ -t ] [ -u ] [ -n ]" 1>&1 exit 0 ;; esac done # # Get the version numbers of installed packages, if any. # if [ -d macosx-support-libs ] then cd macosx-support-libs installed_xz_version=`ls xz-*-done 2>/dev/null | sed 's/xz-\(.*\)-done/\1/'` installed_lzip_version=`ls lzip-*-done 2>/dev/null | sed 's/lzip-\(.*\)-done/\1/'` installed_autoconf_version=`ls autoconf-*-done 2>/dev/null | sed 's/autoconf-\(.*\)-done/\1/'` installed_automake_version=`ls automake-*-done 2>/dev/null | sed 's/automake-\(.*\)-done/\1/'` installed_libtool_version=`ls libtool-*-done 2>/dev/null | sed 's/libtool-\(.*\)-done/\1/'` installed_cmake_version=`ls cmake-*-done 2>/dev/null | sed 's/cmake-\(.*\)-done/\1/'` installed_gettext_version=`ls gettext-*-done 2>/dev/null | sed 's/gettext-\(.*\)-done/\1/'` installed_pkg_config_version=`ls pkg-config-*-done 2>/dev/null | sed 's/pkg-config-\(.*\)-done/\1/'` installed_glib_version=`ls glib-*-done 2>/dev/null | sed 's/glib-\(.*\)-done/\1/'` installed_qt_version=`ls qt-*-done 2>/dev/null | sed 's/qt-\(.*\)-done/\1/'` installed_libpng_version=`ls libpng-*-done 2>/dev/null | sed 's/libpng-\(.*\)-done/\1/'` installed_pixman_version=`ls pixman-*-done 2>/dev/null | sed 's/pixman-\(.*\)-done/\1/'` installed_cairo_version=`ls cairo-*-done 2>/dev/null | sed 's/cairo-\(.*\)-done/\1/'` installed_atk_version=`ls atk-*-done 2>/dev/null | sed 's/atk-\(.*\)-done/\1/'` installed_pango_version=`ls pango-*-done 2>/dev/null | sed 's/pango-\(.*\)-done/\1/'` installed_gdk_pixbuf_version=`ls gdk-pixbuf-*-done 2>/dev/null | sed 's/gdk-pixbuf-\(.*\)-done/\1/'` installed_gtk_version=`ls gtk+-*-done 2>/dev/null | sed 's/gtk+-\(.*\)-done/\1/'` installed_libsmi_version=`ls libsmi-*-done 2>/dev/null | sed 's/libsmi-\(.*\)-done/\1/'` installed_libgpg_error_version=`ls libgpg-error-*-done 2>/dev/null | sed 's/libgpg-error-\(.*\)-done/\1/'` installed_libgcrypt_version=`ls libgcrypt-*-done 2>/dev/null | sed 's/libgcrypt-\(.*\)-done/\1/'` installed_gmp_version=`ls gmp-*-done 2>/dev/null | sed 's/gmp-\(.*\)-done/\1/'` installed_nettle_version=`ls nettle-*-done 2>/dev/null | sed 's/nettle-\(.*\)-done/\1/'` installed_gnutls_version=`ls gnutls-*-done 2>/dev/null | sed 's/gnutls-\(.*\)-done/\1/'` installed_lua_version=`ls lua-*-done 2>/dev/null | sed 's/lua-\(.*\)-done/\1/'` installed_portaudio_version=`ls portaudio-*-done 2>/dev/null | sed 's/portaudio-\(.*\)-done/\1/'` installed_snappy_version=`ls snappy-*-done 2>/dev/null | sed 's/snappy-\(.*\)-done/\1/'` installed_libxml2_version=`ls libxml2-*-done 2>/dev/null | sed 's/libxml2-\(.*\)-done/\1/'` installed_lz4_version=`ls lz4-*-done 2>/dev/null | sed 's/lz4-\(.*\)-done/\1/'` installed_sbc_version=`ls sbc-*-done 2>/dev/null | sed 's/sbc-\(.*\)-done/\1/'` installed_geoip_version=`ls geoip-*-done 2>/dev/null | sed 's/geoip-\(.*\)-done/\1/'` installed_cares_version=`ls c-ares-*-done 2>/dev/null | sed 's/c-ares-\(.*\)-done/\1/'` installed_libssh_version=`ls libssh-*-done 2>/dev/null | sed 's/libssh-\(.*\)-done/\1/'` installed_nghttp2_version=`ls nghttp2-*-done 2>/dev/null | sed 's/nghttp2-\(.*\)-done/\1/'` # # If we don't have a versioned -done file for portaudio, but do have # an unversioned -done file for it, assume the installed version is the # requested version, and rename the -done file to include that version. # if [ -z "$installed_portaudio_version" -a -f portaudio-done ] ; then mv portaudio-done portaudio-$PORTAUDIO_VERSION-done installed_portaudio_version=`ls portaudio-*-done 2>/dev/null | sed 's/portaudio-\(.*\)-done/\1/'` fi cd .. fi if [ "$do_uninstall" = "yes" ] then uninstall_all exit 0 fi # # Configure scripts tend to set CFLAGS and CXXFLAGS to "-g -O2" if # invoked without CFLAGS or CXXFLAGS being set in the environment. # # However, we *are* setting them in the environment, for our own # nefarious purposes, so start them out as "-g -O2". # CFLAGS="-g -O2" CXXFLAGS="-g -O2" # # To make this work on Leopard (rather than working *on* Snow Leopard # when building *for* Leopard) will take more work. # # For one thing, Leopard's /usr/X11/lib/libXdamage.la claims, at least # with all software updates applied, that the Xdamage shared library # is libXdamage.1.0.0.dylib, but it is, in fact, libXdamage.1.1.0.dylib. # This causes problems when building GTK+, so the script would have to # fix that file. # if [[ $DARWIN_MAJOR_VERSION -le 9 ]]; then echo "This script does not support any versions of macOS before Snow Leopard" 1>&2 exit 1 fi # if no make options are present, set default options if [ -z "$MAKE_BUILD_OPTS" ] ; then # by default use 1.5x number of cores for parallel build MAKE_BUILD_OPTS="-j $(( $(sysctl -n hw.logicalcpu) * 3 / 2))" fi # # If we have a target release, look for the oldest SDK that's for an # OS equal to or later than that one, and build libraries against it # rather than against the headers and, more importantly, libraries # that come with the OS, so that we don't end up with support libraries # that only work on the OS version on which we built them, not earlier # versions of the same release, or earlier releases if the minimum is # earlier. # if [ ! -z "$min_osx_target" ] then # # Get the real version - strip off the "10.". # deploy_real_version=`echo "$min_osx_target" | sed -n 's/10\.\(.*\)/\1/p'` # # Search each directory that might contain SDKs. # sdkpath="" for sdksdir in /Developer/SDKs \ /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs \ /Library/Developer/CommandLineTools/SDKs do # # Get a list of all the SDKs. # if ! test -d "$sdksdir" then # # There is no directory with that name. # Move on to the next one in the list, if any. # continue fi # # Get a list of all the SDKs in that directory, if any. # sdklist=`(cd "$sdksdir"; ls -d MacOSX10.[0-9]*.sdk 2>/dev/null)` for sdk in $sdklist do # # Get the real version for this SDK. # sdk_real_version=`echo "$sdk" | sed -n 's/MacOSX10\.\(.*\)\.sdk/\1/p'` # # Is it for the deployment target or some later release? # if test "$sdk_real_version" -ge "$deploy_real_version" then # # Yes, use it. # sdkpath="$sdksdir/$sdk" qt_sdk_arg="-sdk $sdk" break 2 fi done done if [ -z "$sdkpath" ] then echo "macosx-setup.sh: Couldn't find an SDK for macOS $min_osx_target or later" 1>&2 exit 1 fi SDKPATH="$sdkpath" sdk_target=10.$sdk_real_version echo "Using the 10.$sdk_real_version SDK" # # Make sure there are links to /usr/local/include and /usr/local/lib # in the SDK's usr/local. # if [ ! -e $SDKPATH/usr/local/include ] then if [ ! -d $SDKPATH/usr/local ] then sudo mkdir $SDKPATH/usr/local fi sudo ln -s /usr/local/include $SDKPATH/usr/local/include fi if [ ! -e $SDKPATH/usr/local/lib ] then if [ ! -d $SDKPATH/usr/local ] then sudo mkdir $SDKPATH/usr/local fi sudo ln -s /usr/local/lib $SDKPATH/usr/local/lib fi # # Set the minimum OS version for which to build to the specified # minimum target OS version, so we don't, for example, end up using # linker features supported by the OS verson on which we're building # but not by the target version. # VERSION_MIN_FLAGS="-mmacosx-version-min=$min_osx_target" # # Compile and link against the SDK. # SDKFLAGS="-isysroot $SDKPATH" if [[ "$min_osx_target" == "10.5" ]] then # # Cairo is part of Mac OS X 10.6 and later. # The *headers* are supplied by 10.5, but the *libraries* # aren't, so we have to build it if we're building for 10.5. # cairo_not_in_the_os=yes # # Build with older versions of the support libraries, as # were used on the Wireshark Leopard buildbot at one # point. (Most of these versions come from the About page # from Wireshark 1.8.6, the last build done on that buildbot; # the ATK version isn't reported, so this is a guess.) # # If you want to try building with newer versions of # the libraries, note that: # # The version of fontconfig that comes with Leopard doesn't # support FC_WEIGHT_EXTRABLACK, so we can't use any version # of Pango newer than 1.22.4. # # However, Pango 1.22.4 doesn't work with versions of GLib # after 2.29.6, because Pango 1.22.4 uses G_CONST_RETURN and # GLib 2.29.8 and later deprecate it (there doesn't appear to # be a GLib 2.29.7). That means we'd either have to patch # Pango not to use it (just use "const"; G_CONST_RETURN was # there to allow code to choose whether to use "const" or not), # or use GLib 2.29.6 or earlier. # # GLib 2.29.6 includes an implementation of g_bit_lock() that, # on x86 (32-bit and 64-bit), uses asms in a fashion # ("asm volatile goto") that requires GCC 4.5 or later, which # is later than the compilers that come with Leopard and Snow # Leopard. Recent versions of GLib check for that, but 2.29.6 # doesn't, so, if you want to build GLib 2.29.6 on Leopard or # Snow Leopard, you would have to patch glib/gbitlock.c to do # what the newer versions of GLib do: # # define a USE_ASM_GOTO macro that indicates whether "asm goto" # can be used: # #if (defined (i386) || defined (__amd64__)) # #if __GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5) # #define USE_ASM_GOTO 1 # #endif # #endif # # replace all occurrences of # # #if defined (__GNUC__) && (defined (i386) || defined (__amd64__)) # # with # # #ifdef USE_ASM_GOTO # # Using GLib 2.29.6 or earlier, however, means that we can't # use a version of ATK later than 2.3.93, as those versions # don't work with GLib 2.29.6. The same applies to gdk-pixbuf; # versions of gdk-pixbuf after 2.24.1 won't work with GLib # 2.29.6. # # Then you have to make sure that what you've build doesn't # cause the X server that comes with Leopard to crash; at # least one attempt at building for Leopard did. # # At least if building on Leopard, you might also find # that, with various older versions of Cairo, including # 1.6.4 and at least some 1.8.x versions, when you try to # build it, the build fails because it can't find # png_set_longjmp_fn(). I vaguely remember dealing with that, # ages ago, but don't remember what I did. # GLIB_VERSION=2.16.3 if [ "$CAIRO_VERSION" ] then CAIRO_VERSION=1.6.4 fi if [ "$ATK_VERSION" ] then ATK_VERSION=1.24.0 fi if [ "$PANGO_VERSION" ] then PANGO_VERSION=1.20.2 fi if [ "$GTK_VERSION" ] then GTK_VERSION=2.12.9 fi # # That version of GTK+ includes gdk-pixbuf. # XXX - base this on the version of GTK+ requested. # GDK_PIXBUF_VERSION= # # Libgcrypt 1.5.0 fails to compile due to some problem with an # asm in rijndael.c, at least with i686-apple-darwin10-gcc-4.2.1 # (GCC) 4.2.1 (Apple Inc. build 5666) (dot 3) when building # 32-bit. # # We try libgcrypt 1.4.3 instead, as that's what shows up in # the version from the Leopard buildbot. LIBGCRYPT_VERSION=1.4.3 # # Build 32-bit while we're at it; Leopard has a bug that # causes some BPF functions not to work with 64-bit userland # code, so capturing won't work. # CFLAGS="$CFLAGS -arch i386" CXXFLAGS="$CXXFLAGS -arch i386" export LDFLAGS="$LDFLAGS -arch i386" fi fi export CFLAGS export CXXFLAGS # # You need Xcode or the command-line tools installed to get the compilers. # if [ ! -x /usr/bin/xcodebuild ]; then echo "Please install Xcode first (should be available on DVD or from the Mac App Store)." exit 1 fi if [ "$QT_VERSION" ]; then # # We need Xcode, not just the command-line tools, installed to build # Qt. # # At least with Xcode 8, /usr/bin/xcodebuild --help fails if only # the command-line tools are installed and succeeds if Xcode is # installed. Unfortunately, it fails *with* Xcode 3, but # /usr/bin/xcodebuild -version works with that and with Xcode 8. # Hopefully it fails with only the command-line tools installed. # if /usr/bin/xcodebuild -version >/dev/null 2>&1; then : else echo "Please install Xcode first (should be available on DVD or from the Mac App Store)." echo "The command-line build tools are not sufficient to build Qt." exit 1 fi fi if [ "$GTK_VERSION" ]; then # # If we're building with GTK+, you also need the X11 SDK; with at least # some versions of macOS and Xcode, that is, I think, an optional install. # (Or it might be installed with X11, but I think *that* is an optional # install on at least some versions of macOS.) # if [ ! -d /usr/X11/include ]; then echo "Please install X11 and the X11 SDK first." echo " You can either download the latest package from" echo " http://www.xquartz.org/ and install it or install" echo " the native Apple package if you are on Lion or below." exit 1 fi fi export PKG_CONFIG_PATH=/usr/local/lib/pkgconfig:/usr/X11/lib/pkgconfig # # Do all the downloads and untarring in a subdirectory, so all that # stuff can be removed once we've installed the support libraries. # if [ ! -d macosx-support-libs ] then mkdir macosx-support-libs || exit 1 fi cd macosx-support-libs install_all echo "" # # Indicate what paths to use for pkg-config and cmake. # pkg_config_path=/usr/local/lib/pkgconfig if [ "$QT_VERSION" ]; then qt_base_path=$HOME/Qt$QT_VERSION/$QT_MAJOR_MINOR_VERSION/clang_64 pkg_config_path="$pkg_config_path":"$qt_base_path/lib/pkgconfig" CMAKE_PREFIX_PATH="$CMAKE_PREFIX_PATH":"$qt_base_path/lib/cmake" fi if [ "$GTK_VERSION" ]; then pkg_config_path="$pkg_config_path":/usr/X11/lib/pkgconfig fi if $no_build; then echo "All required dependencies downloaded. Run without -n to install them." exit 0 fi echo "You are now prepared to build Wireshark." echo if [[ $CMAKE ]]; then echo "To build with CMAKE:" echo echo "export PKG_CONFIG_PATH=$pkg_config_path" echo "export CMAKE_PREFIX_PATH=$CMAKE_PREFIX_PATH" echo "export PATH=$PATH:$qt_base_path/bin" echo echo "mkdir build; cd build" echo "cmake .." echo "make $MAKE_BUILD_OPTS app_bundle" echo "make install/strip" echo fi if [[ $AUTOTOOLS ]]; then echo "To build with AUTOTOOLS:" echo echo "export PKG_CONFIG_PATH=$pkg_config_path" echo echo "./autogen.sh" echo "mkdir build; cd build" echo "../configure" echo "make $MAKE_BUILD_OPTS" echo "make install" echo fi echo "Make sure you are allowed capture access to the network devices" echo "See: https://wiki.wireshark.org/CaptureSetup/CapturePrivileges" echo exit 0