/* req_resp_hdrs.c
 * Routines handling protocols with a request/response line, headers,
 * a blank line, and an optional body.
 *
 * Wireshark - Network traffic analyzer
 * By Gerald Combs <gerald@wireshark.org>
 * Copyright 1998 Gerald Combs
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version 2
 * of the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 */

#include "config.h"

#include <glib.h>
#include <stdio.h>
#include <string.h>

#include <epan/packet.h>
#include <epan/strutil.h>

#include <epan/req_resp_hdrs.h>

/*
 * Optionally do reassembly of the request/response line, headers, and body.
 */
gboolean
req_resp_hdrs_do_reassembly(tvbuff_t *tvb, const int offset, packet_info *pinfo,
    const gboolean desegment_headers, const gboolean desegment_body)
{
	gint		next_offset;
	gint		next_offset_sav;
	gint		length_remaining, reported_length_remaining;
	int		linelen;
	gchar		*header_val;
	int		content_length;
	gboolean	content_length_found = FALSE;
	gboolean	content_type_found = FALSE;
	gboolean	chunked_encoding = FALSE;
	gboolean	keepalive_found = FALSE;
	gchar		*line;
	gchar		*content_type = NULL;

	/*
	 * Do header desegmentation if we've been told to.
	 *
	 * RFC 2616 defines HTTP messages as being either of the
	 * Request or the Response type
	 * (HTTP-message = Request | Response).
	 * Request and Response are defined as:
	 *     Request = Request-Line
	 *         *(( general-header
	 *         | request-header
	 *         | entity-header ) CRLF)
	 *         CRLF
	 *         [ message-body ]
	 *     Response = Status-Line
	 *         *(( general-header
	 *         | response-header
	 *         | entity-header ) CRLF)
	 *         CRLF
	 *         [ message-body ]
	 * that's why we can always assume two consecutive line
	 * endings (we allow CR, LF, or CRLF, as some clients
	 * or servers might not use a full CRLF) to mark the end
	 * of the headers.  The worst thing that would happen
	 * otherwise would be the packet not being desegmented
	 * or being interpreted as only headers.
	 *
	 * RFC 2326 says RTSP works the same way; RFC 3261 says SIP
	 * works the same way.
	 */

	/*
	 * If header desegmentation is activated, check that all
	 * headers are in this tvbuff (search for an empty line
	 * marking end of headers) or request one more byte (we
	 * don't know how many bytes we'll need, so we just ask
	 * for one).
	 */
	if (desegment_headers && pinfo->can_desegment) {
		next_offset = offset;
		for (;;) {
			next_offset_sav = next_offset;

			reported_length_remaining =
			    tvb_reported_length_remaining(tvb, next_offset);

			/*
			 * Request one more byte if there're no
			 * bytes left in the reported data (if there're
			 * bytes left in the reported data, but not in
			 * the available data, requesting more bytes
			 * won't help, as those bytes weren't captured).
			 */
			if (reported_length_remaining < 1) {
				pinfo->desegment_offset = offset;
				pinfo->desegment_len = DESEGMENT_ONE_MORE_SEGMENT;
				return FALSE;
			}

			length_remaining = tvb_captured_length_remaining(tvb,
			    next_offset);

			/*
			 * Request one more byte if we cannot find a
			 * header (i.e. a line end).
			 */
			linelen = tvb_find_line_end(tvb, next_offset,
			    length_remaining, &next_offset, TRUE);
			if (linelen == -1 &&
			    length_remaining >= reported_length_remaining) {
				/*
				 * Not enough data; ask for one more
				 * byte.
				 */
				pinfo->desegment_offset = offset;
				pinfo->desegment_len = DESEGMENT_ONE_MORE_SEGMENT;
				return FALSE;
			}

                        if (linelen == 0) {
				/*
				 * We found the end of the headers.
				 */
				break;
			}

			/*
			 * Is this a Content-Length or Transfer-Encoding
			 * header?  If not, it either means that we are in
			 * a different header line, or that we are
			 * at the end of the headers, or that there
			 * isn't enough data; the two latter cases
			 * have already been handled above.
			 */
			if (desegment_body) {
				/* Optimization to avoid fetching the whole (potentially very long)
				 * line and doing expensive string comparisons if the first
				 * character doesn't match. Shaves about 20% off the load time of
				 * one of my sample files that's HTTP-alike. */
				guchar first_byte = tvb_get_guint8(tvb, next_offset_sav);
				if (! (first_byte == 'c' || first_byte == 'C' ||
				       first_byte == 't' || first_byte == 'T')) {
					continue;
				}

				/*
				 * Check if we've found Content-Length.
				 */
				line = tvb_get_string_enc(wmem_packet_scope(), tvb, next_offset_sav, linelen, ENC_UTF_8|ENC_NA);
				if (g_ascii_strncasecmp(line, "Content-Length:", 15) == 0) {
					/* XXX - what if it doesn't fit in an int?
					   (Do not "fix" that by making this
					   a "long"; make it a gint64 or a
					   guint64.) */
					if (sscanf(line+15,"%i", &content_length) == 1)
						content_length_found = TRUE;
				} else if (g_ascii_strncasecmp(line, "Content-Type:", 13) == 0) {
					content_type_found = TRUE;
					content_type = line+13;
					while (*content_type == ' ') {
						content_type++;
					}
				} else if (g_ascii_strncasecmp(line, "Connection:", 11) == 0) {
					/* Check for keep-alive */
					header_val = line+11;
					if(header_val){
						while(*header_val==' '){
							header_val++;
						}
						if(!g_ascii_strncasecmp(header_val, "Keep-Alive", 10)){
							keepalive_found = TRUE;
						}
					}
				} else if (g_ascii_strncasecmp( line, "Transfer-Encoding:", 18) == 0) {
					/*
					 * Find out if this Transfer-Encoding is
					 * chunked.  It should be, since there
					 * really aren't any other types, but
					 * RFC 2616 allows for them.
					 */
					gchar *p;
					guint len;

					header_val = line+18;
					p = header_val;
					len = (guint) strlen(header_val);
					/* Skip white space */
					while (p < header_val + len &&
					    (*p == ' ' || *p == '\t'))
						p++;
					if (p <= header_val + len) {
						if (g_ascii_strncasecmp(p, "chunked", 7)
						    == 0) {
							/*
							 * Don't bother looking
							 * for extensions;
							 * since we don't
							 * understand them,
							 * they should be
							 * ignored.
							 */
							chunked_encoding = TRUE;
						}
					}
				}
			}
		}
	}

	/*
	 * The above loop ends when we reached the end of the headers, so
	 * there should be content_length bytes after the 4 terminating bytes
	 * and next_offset points to after the end of the headers.
	 */
	if (desegment_body) {
		if (chunked_encoding) {
			/*
			 * This data is chunked, so we need to keep pulling
			 * data until we reach the end of the stream, or a
			 * zero sized chunk.
			 *
			 * XXX
			 * This doesn't bother with trailing headers; I don't
			 * think they are really used, and we'd have to use
			 * is_http_request_or_reply() to determine if it was
			 * a trailing header, or the start of a new response.
			 */
			gboolean done_chunking = FALSE;

			while (!done_chunking) {
				guint chunk_size = 0;
				gint  chunk_offset = 0;
				gchar *chunk_string = NULL;
				gchar *c = NULL;

				reported_length_remaining =
				    tvb_reported_length_remaining(tvb,
				    next_offset);

				if (reported_length_remaining < 1) {
					pinfo->desegment_offset = offset;
					pinfo->desegment_len = DESEGMENT_ONE_MORE_SEGMENT;
					return FALSE;
				}

				length_remaining = tvb_captured_length_remaining(tvb,
				    next_offset);

				linelen = tvb_find_line_end(tvb, next_offset,
						length_remaining, &chunk_offset, TRUE);

				if (linelen == -1 &&
				    length_remaining >=
				    reported_length_remaining) {
					 pinfo->desegment_offset = offset;
					 pinfo->desegment_len = DESEGMENT_ONE_MORE_SEGMENT;
					 return FALSE;
				}

				/* We have a line with the chunk size in it.*/
				chunk_string = tvb_get_string(wmem_packet_scope(), tvb, next_offset,
				    linelen);
				c = chunk_string;

				/*
				 * We don't care about the extensions.
				 */
				if ((c = strchr(c, ';'))) {
					*c = '\0';
				}

				if (sscanf(chunk_string, "%x", &chunk_size) < 1) {
					/* We couldn't get the chunk size,
					 * so stop trying.
					 */
					return TRUE;
				}
				if (chunk_size > 1U<<31) {
					/* Chunk size is unreasonable. */
					/* XXX What /is/ reasonable? */
					return TRUE;
				}

				if (chunk_size == 0) {
					/*
					 * This is the last chunk.  Let's pull in the
					 * trailing CRLF.
					 */
					linelen = tvb_find_line_end(tvb,
					    chunk_offset, length_remaining, &chunk_offset, TRUE);

					if (linelen == -1 &&
					    length_remaining >=
					    reported_length_remaining) {
						pinfo->desegment_offset = offset;
						pinfo->desegment_len = DESEGMENT_ONE_MORE_SEGMENT;
						return FALSE;
					}

					pinfo->desegment_offset = chunk_offset;
					pinfo->desegment_len = 0;
					done_chunking = TRUE;
				} else {
					/*
					 * Skip to the next chunk if we
					 * already have it
					 */
					if (reported_length_remaining >
					        (gint) chunk_size) {

						next_offset = chunk_offset
						    + chunk_size + 2;
					} else {
						/*
						 * Fetch this chunk, plus the
						 * trailing CRLF.
						 */
						pinfo->desegment_offset = offset;
						pinfo->desegment_len = DESEGMENT_ONE_MORE_SEGMENT;
						return FALSE;
					}
				}

			}
		} else if (content_length_found) {
			if (content_length >= 128*1024) { /* MS-RPCH stipulate that the content-length must be between 128K and 2G */
				gchar *tmp;
				if (content_type_found &&
				strncmp(content_type, "application/rpc", 15) == 0) {
					/* It looks like a RPC_IN_DATA request or a RPC_OUT_DATA response
					 * in which the content-length is meaningless
					 */
					return TRUE;
				}
				/* Following sizeof will return the length of the string + \0 we need to not count it*/
				tmp = tvb_get_string(wmem_packet_scope(), tvb, 0, sizeof("RPC_OUT_DATA") - 1);
				if ((strncmp(tmp, "RPC_IN_DATA", sizeof("RPC_IN_DATA") - 1) == 0) ||
				    (strncmp(tmp, "RPC_OUT_DATA", sizeof("RPC_OUT_DATA") - 1) == 0)) {
					return TRUE;
				}
			}
			/* next_offset has been set to the end of the headers */
			if (!tvb_bytes_exist(tvb, next_offset, content_length)) {
				length_remaining = tvb_captured_length_remaining(tvb,
				    next_offset);
				reported_length_remaining =
				    tvb_reported_length_remaining(tvb, next_offset);
				if (length_remaining < reported_length_remaining) {
					/*
					 * It's a waste of time asking for more
					 * data, because that data wasn't captured.
					 */
					return TRUE;
				}
				if (length_remaining == -1)
					length_remaining = 0;
				pinfo->desegment_offset = offset;
				pinfo->desegment_len =
				    content_length - length_remaining;
				return FALSE;
			}
		} else if (content_type_found && pinfo->can_desegment) {
			/* We found a content-type but no content-length.
			 * This is probably a HTTP header for a session with
			 * only one HTTP PDU and where the content spans
			 * until the end of the tcp session, unless there
			 * is a keepalive header present in which case we
			 * assume there is no message body at all and thus
			 * we won't do any reassembly.
			 * Set up tcp reassembly until the end of this session.
			 */
			length_remaining = tvb_captured_length_remaining(tvb, next_offset);
			reported_length_remaining = tvb_reported_length_remaining(tvb, next_offset);
			if (length_remaining < reported_length_remaining) {
				/*
				 * It's a waste of time asking for more
				 * data, because that data wasn't captured.
				 */
				return TRUE;
			}

			if (keepalive_found) {
				/* We have a keep-alive but no content-length.
				 * Assume there is no message body and don't
				 * do any reassembly.
				 */
				return TRUE;
			}

			pinfo->desegment_offset = offset;
			pinfo->desegment_len = DESEGMENT_UNTIL_FIN;

			return FALSE;
		}

	}

	/*
	 * No further desegmentation needed.
	 */
	return TRUE;
}

/*
 * Editor modelines  -  http://www.wireshark.org/tools/modelines.html
 *
 * Local variables:
 * c-basic-offset: 8
 * tab-width: 8
 * indent-tabs-mode: t
 * End:
 *
 * vi: set shiftwidth=8 tabstop=8 noexpandtab:
 * :indentSize=8:tabSize=8:noTabs=false:
 */