/* packet-hp-erm.c * Routines for the disassembly of HP ProCurve encapsulated remote mirroring frames * (Adapted from packet-cisco-erspan.c and packet-vlan.c) * * Copyright 2010 2012 William Meier , * Zdravko Velinov * * Wireshark - Network traffic analyzer * By Gerald Combs * Copyright 1998 Gerald Combs * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */ /* * For some information on HP Procurve encapsulated remote mirroring see * "Traffic Mirroring" in Appendix B of the HP manual * "Management and Configuration Guide for the ProCurve Series * 3500, 3500yl, 5400zl, 6200yl, 6600, and 8200zl Switches (September 2009)" * * Format: * The above manual indicates that the encapsulatedmirrored frame is transmitted * on the network as a [UDP] packet which has 54 bytes preceding the mirrored frame. * Examining a sample capture shows that this means that the data payload * of the UDP packet consists of a 12 byte "header" followed by the * bytes of the mirrored frame. * * After some additional tests, which involved injecting 802.1Q frames with * different priorities and VLAN identifiers. It was determined that the HP * ERM header has a part inside its header that closely resembles the 802.1Q * header. The only difference is the priority numbering. */ #include "config.h" #include void proto_register_hp_erm(void); void proto_reg_handoff_hp_erm(void); #define PROTO_SHORT_NAME "HP_ERM" #define PROTO_LONG_NAME "HP encapsulated remote mirroring" static int proto_hp_erm = -1; static gint ett_hp_erm = -1; static int hf_hp_erm_unknown1 = -1; static int hf_hp_erm_unknown2 = -1; static int hf_hp_erm_unknown3 = -1; static int hf_hp_erm_priority = -1; static int hf_hp_erm_cfi = -1; static int hf_hp_erm_vlan = -1; static int hf_hp_erm_is_tagged = -1; static const value_string hp_erm_pri_vals[] = { { 0, "Background" }, { 1, "Spare" }, { 2, "Best Effort (default)" }, { 3, "Excellent Effort" }, { 4, "Controlled Load" }, { 5, "Video, < 100ms latency and jitter" }, { 6, "Voice, < 10ms latency and jitter" }, { 7, "Network Control" }, { 0, NULL } }; static const true_false_string hp_erm_canonical = { "Non-canonical", "Canonical" }; static dissector_handle_t eth_withoutfcs_handle; static int dissect_hp_erm(tvbuff_t *tvb, packet_info *pinfo, proto_tree *tree, void* data _U_) { proto_item *ti; proto_tree *hp_erm_tree; tvbuff_t *eth_tvb; int offset = 0; const gint *flags[] = { &hf_hp_erm_unknown2, &hf_hp_erm_priority, &hf_hp_erm_cfi, &hf_hp_erm_vlan, &hf_hp_erm_is_tagged, &hf_hp_erm_unknown3, NULL }; col_set_str(pinfo->cinfo, COL_PROTOCOL, PROTO_SHORT_NAME); col_set_str(pinfo->cinfo, COL_INFO, PROTO_SHORT_NAME ":"); ti = proto_tree_add_item(tree, proto_hp_erm, tvb, 0, -1, ENC_NA); hp_erm_tree = proto_item_add_subtree(ti, ett_hp_erm); proto_tree_add_item(hp_erm_tree, hf_hp_erm_unknown1, tvb, offset, 8, ENC_NA); offset += 8; proto_tree_add_bitmask_list(hp_erm_tree, tvb, offset, 4, flags, ENC_BIG_ENDIAN); offset += 4; eth_tvb = tvb_new_subset_remaining(tvb, offset); call_dissector(eth_withoutfcs_handle, eth_tvb, pinfo, tree); return tvb_captured_length(tvb); } void proto_register_hp_erm(void) { static hf_register_info hf[] = { { &hf_hp_erm_unknown1, { "Unknown1", "hp_erm.unknown1", FT_BYTES, BASE_NONE, NULL, 0x0, NULL, HFILL }}, { &hf_hp_erm_unknown2, { "Unknown2", "hp_erm.unknown2", FT_UINT32, BASE_DEC, NULL, 0xFF000000, NULL, HFILL }}, { &hf_hp_erm_priority, { "Priority", "hp_erm.priority", FT_UINT32, BASE_DEC, VALS(hp_erm_pri_vals), 0x00E00000, NULL, HFILL }}, { &hf_hp_erm_cfi, { "CFI", "hp_erm.cfi", FT_BOOLEAN, 32, TFS(&hp_erm_canonical), 0x00100000, NULL, HFILL }}, { &hf_hp_erm_vlan, { "Vlan", "hp_erm.vlan", FT_UINT32, BASE_DEC, NULL, 0x000FFF00, NULL, HFILL }}, { &hf_hp_erm_is_tagged, { "Is_Tagged", "hp_erm.is_tagged", FT_BOOLEAN, 32, TFS(&tfs_yes_no), 0x00000080, NULL, HFILL }}, { &hf_hp_erm_unknown3, { "Unknown3", "hp_erm.unknown3", FT_UINT32, BASE_DEC, NULL, 0x0000007F, NULL, HFILL }} }; static gint *ett[] = { &ett_hp_erm, }; proto_hp_erm = proto_register_protocol(PROTO_LONG_NAME, PROTO_SHORT_NAME, "hp_erm"); proto_register_field_array(proto_hp_erm, hf, array_length(hf)); proto_register_subtree_array(ett, array_length(ett)); } void proto_reg_handoff_hp_erm(void) { dissector_handle_t hp_erm_handle; eth_withoutfcs_handle = find_dissector_add_dependency("eth_withoutfcs", proto_hp_erm); hp_erm_handle = create_dissector_handle(dissect_hp_erm, proto_hp_erm); dissector_add_for_decode_as_with_preference("udp.port", hp_erm_handle); } /* * Editor modelines * * Local Variables: * c-basic-offset: 4 * tab-width: 8 * indent-tabs-mode: nil * End: * * ex: set shiftwidth=4 tabstop=8 expandtab: * :indentSize=4:tabSize=8:noTabs=true: */