/* packet-ftp.c * Routines for ftp packet dissection * Copyright 1999, Richard Sharpe * Copyright 2001, Juan Toledo (Passive FTP) * * Wireshark - Network traffic analyzer * By Gerald Combs * Copyright 1998 Gerald Combs * * Copied from packet-pop.c * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. */ #include "config.h" #include #include #include #include #include #include #include #include void proto_register_ftp(void); void proto_reg_handoff_ftp(void); static int proto_ftp = -1; static int proto_ftp_data = -1; static int hf_ftp_current_working_directory = -1; static int hf_ftp_response = -1; static int hf_ftp_request = -1; static int hf_ftp_request_command = -1; static int hf_ftp_request_arg = -1; static int hf_ftp_response_code = -1; static int hf_ftp_response_arg = -1; static int hf_ftp_pasv_ip = -1 ; static int hf_ftp_pasv_port = -1; static int hf_ftp_pasv_nat = -1; static int hf_ftp_active_ip = -1; static int hf_ftp_active_port = -1; static int hf_ftp_active_nat = -1; static int hf_ftp_eprt_af = -1; static int hf_ftp_eprt_ip = -1; static int hf_ftp_eprt_ipv6 = -1; static int hf_ftp_eprt_port = -1; static int hf_ftp_epsv_ip = -1; static int hf_ftp_epsv_ipv6 = -1; static int hf_ftp_epsv_port = -1; static int hf_ftp_command_response_frames = -1; static int hf_ftp_command_response_first_frame_num = -1; static int hf_ftp_command_response_last_frame_num = -1; static int hf_ftp_command_response_duration = -1; static int hf_ftp_command_setup_frame = -1; static int hf_ftp_command_command_frame = -1; static int hf_ftp_command_command = -1; static int hf_ftp_data_setup_frame = -1; static int hf_ftp_data_setup_method = -1; static int hf_ftp_data_command = -1; static int hf_ftp_data_command_frame = -1; static int hf_ftp_data_current_working_directory = -1; static gint ett_ftp = -1; static gint ett_ftp_reqresp = -1; static expert_field ei_ftp_eprt_args_invalid = EI_INIT; static expert_field ei_ftp_epsv_args_invalid = EI_INIT; static expert_field ei_ftp_response_code_invalid = EI_INIT; static expert_field ei_ftp_pwd_response_invalid = EI_INIT; static dissector_handle_t ftpdata_handle; static dissector_handle_t ftp_handle; static dissector_handle_t data_text_lines_handle; #define TCP_PORT_FTPDATA 20 #define TCP_PORT_FTP 21 static const value_string response_table[] = { { 110, "Restart marker reply" }, { 120, "Service ready in nnn minutes" }, { 125, "Data connection already open; transfer starting" }, { 150, "File status okay; about to open data connection" }, { 200, "Command okay" }, { 202, "Command not implemented, superfluous at this site" }, { 211, "System status, or system help reply" }, { 212, "Directory status" }, { 213, "File status" }, { 214, "Help message" }, { 215, "NAME system type" }, { 220, "Service ready for new user" }, { 221, "Service closing control connection" }, { 225, "Data connection open; no transfer in progress" }, { 226, "Closing data connection" }, { 227, "Entering Passive Mode" }, { 229, "Entering Extended Passive Mode" }, { 230, "User logged in, proceed" }, { 232, "User logged in, authorized by security data exchange" }, { 234, "Security data exchange complete" }, { 235, "Security data exchange completed successfully" }, { 250, "Requested file action okay, completed" }, { 257, "PATHNAME created" }, { 331, "User name okay, need password" }, { 332, "Need account for login" }, { 334, "Requested security mechanism is ok" }, { 335, "Security data is acceptable, more is required" }, { 336, "Username okay, need password. Challenge is ..." }, { 350, "Requested file action pending further information" }, { 421, "Service not available, closing control connection" }, { 425, "Can't open data connection" }, { 426, "Connection closed; transfer aborted" }, { 431, "Need some unavailable resource to process security" }, { 450, "Requested file action not taken" }, { 451, "Requested action aborted: local error in processing" }, { 452, "Requested action not taken. Insufficient storage space in system" }, { 500, "Syntax error, command unrecognized" }, { 501, "Syntax error in parameters or arguments" }, { 502, "Command not implemented" }, { 503, "Bad sequence of commands" }, { 504, "Command not implemented for that parameter" }, { 522, "Network protocol not supported" }, { 530, "Not logged in" }, { 532, "Need account for storing files" }, { 533, "Command protection level denied for policy reasons" }, { 534, "Request denied for policy reasons" }, { 535, "Failed security check (hash, sequence, etc)" }, { 536, "Requested PROT level not supported by mechanism" }, { 537, "Command protection level not supported by security mechanism" }, { 550, "Requested action not taken: File unavailable" }, { 551, "Requested action aborted: page type unknown" }, { 552, "Requested file action aborted: Exceeded storage allocation" }, { 553, "Requested action not taken: File name not allowed" }, { 631, "Integrity protected reply" }, { 632, "Confidentiality and integrity protected reply" }, { 633, "Confidentiality protected reply" }, { 0, NULL } }; static value_string_ext response_table_ext = VALUE_STRING_EXT_INIT(response_table); #define EPRT_AF_IPv4 1 #define EPRT_AF_IPv6 2 static const value_string eprt_af_vals[] = { { EPRT_AF_IPv4, "IPv4" }, { EPRT_AF_IPv6, "IPv6" }, { 0, NULL } }; /********************************************************************/ /* Storing session state and linking between control (ftp) and data */ /* data (ftp-data) conversations */ typedef struct ftp_data_conversation_t { const gchar *command; /* Command that this data answers */ guint32 command_frame; /* Frame command was seen */ const gchar *setup_method; /* Type of command used to set up data conversation */ guint32 setup_frame; /* Frame where this happened */ wmem_strbuf_t *current_working_directory; /* Summary details of stream to show in command frame. */ guint first_frame_num; nstime_t first_frame_time; guint last_frame_num; nstime_t last_frame_time; guint frames_seen; } ftp_data_conversation_t; /* Data to associate with individual FTP frame */ typedef struct ftp_packet_data_t { wmem_strbuf_t *current_working_directory; } ftp_packet_data_t; /* State of FTP conversation */ typedef struct ftp_conversation_t { const gchar *last_command; /* Most recent request command seen (on first pass) */ guint32 last_command_frame; /* When request was seen */ wmem_strbuf_t *current_working_directory; ftp_data_conversation_t *current_data_conv; /* Current data conversation (during first pass) */ guint32 current_data_setup_frame; } ftp_conversation_t; /* For a given packet, retrieve or initialise a new conversation, and return it */ static ftp_conversation_t *find_or_create_ftp_conversation(packet_info *pinfo) { /* Create control conversation if necessary */ conversation_t *conv = find_or_create_conversation(pinfo); ftp_conversation_t *p_ftp_conv; /* Control conversation data */ p_ftp_conv = (ftp_conversation_t *)conversation_get_proto_data(conv, proto_ftp); if (!p_ftp_conv) { p_ftp_conv = wmem_new0(wmem_file_scope(), ftp_conversation_t); /* Start with an empty string - assume relative path unless/until find out differently. */ p_ftp_conv->current_working_directory = wmem_strbuf_new(wmem_file_scope(), ""); conversation_add_proto_data(conv, proto_ftp, p_ftp_conv); } return p_ftp_conv; } /* Keep track of ftp_data_conversation_t*, keyed by the ftp command frame */ static GHashTable *ftp_command_to_data_hash = NULL; /* When new data conversation is being created, should: * - create data conversation * - create control conversation, and have it point at control conversation */ static void create_and_link_data_conversation(packet_info *pinfo, address *addr_a, guint16 port_a, address *addr_b, guint16 port_b, const char *method) { /* Only to do on first pass */ if (pinfo->fd->flags.visited) { return; } ftp_conversation_t *p_ftp_conv = find_or_create_ftp_conversation(pinfo); /* Create data conversation and set dissector */ ftp_data_conversation_t *p_ftp_data_conv; conversation_t *data_conversation = conversation_new(pinfo->num, addr_a, addr_b, ENDPOINT_TCP, port_a, port_b, NO_PORT2); conversation_set_dissector(data_conversation, ftpdata_handle); /* Allocate data for data conversation. Note that control conversation will update it with commands. */ p_ftp_data_conv = wmem_new0(wmem_file_scope(), ftp_data_conversation_t); /* Set method */ p_ftp_data_conv->setup_method = method; /* Copy snapshot of what cwd is at this point */ p_ftp_data_conv->current_working_directory = p_ftp_conv->current_working_directory; /* Point control conversation at current data conversation */ conversation_add_proto_data(data_conversation, proto_ftp_data, p_ftp_data_conv); p_ftp_conv->current_data_conv = p_ftp_data_conv; p_ftp_conv->current_data_setup_frame = pinfo->num; } /********************************************************************/ /* * Parse the address and port information in a PORT command or in the * response to a PASV command. Return TRUE if we found an address and * port, and supply the address and port; return FALSE if we didn't find * them. * * We ignore the IP address in the reply, and use the address from which * the request came. * * XXX - are there cases where they differ? What if the FTP server is * behind a NAT box, so that the address it puts into the reply isn't * the address at which you should contact it? Do all NAT boxes detect * FTP PASV replies and rewrite the address? (I suspect not.) * * RFC 959 doesn't say much about the syntax of the 227 reply. * * A proposal from Dan Bernstein at * * http://cr.yp.to/ftp/retr.html * * "recommend[s] that clients use the following strategy to parse the * response line: look for the first digit after the initial space; look * for the fourth comma after that digit; read two (possibly negative) * integers, separated by a comma; the TCP port number is p1*256+p2, where * p1 is the first integer modulo 256 and p2 is the second integer modulo * 256." * * wget 1.5.3 looks for a digit, although it doesn't handle negative * integers. * * The FTP code in the source of the cURL library, at * * http://curl.haxx.se/lxr/source/lib/ftp.c * * says that cURL "now scans for a sequence of six comma-separated numbers * and will take them as IP+port indicators"; it loops, doing "sscanf"s * looking for six numbers separated by commas, stepping the start pointer * in the scanf one character at a time - i.e., it tries rather exhaustively. * * An optimization would be to scan for a digit, and start there, and if * the scanf doesn't find six values, scan for the next digit and try * again; this will probably succeed on the first try. * * The cURL code also says that "found reply-strings include": * * "227 Entering Passive Mode (127,0,0,1,4,51)" * "227 Data transfer will passively listen to 127,0,0,1,4,51" * "227 Entering passive mode. 127,0,0,1,4,51" * * so it appears that you can't assume there are parentheses around * the address and port number. */ static gboolean parse_port_pasv(const guchar *line, int linelen, guint32 *ftp_ip, guint16 *ftp_port, guint32 *pasv_offset, guint *ftp_ip_len, guint *ftp_port_len) { char *args; char *p; guchar c; int i; int ip_address[4], port[2]; gboolean ret = FALSE; /* * Copy the rest of the line into a null-terminated buffer. */ args = wmem_strndup(wmem_packet_scope(), line, linelen); p = args; for (;;) { /* * Look for a digit. */ while ((c = *p) != '\0' && !g_ascii_isdigit(c)) p++; if (*p == '\0') { /* * We ran out of text without finding anything. */ break; } /* * See if we have six numbers. */ i = sscanf(p, "%d,%d,%d,%d,%d,%d", &ip_address[0], &ip_address[1], &ip_address[2], &ip_address[3], &port[0], &port[1]); if (i == 6) { /* * We have a winner! */ *ftp_port = ((port[0] & 0xFF)<<8) | (port[1] & 0xFF); *ftp_ip = g_htonl((ip_address[0] << 24) | (ip_address[1] <<16) | (ip_address[2] <<8) | ip_address[3]); *pasv_offset = (guint32)(p - args); *ftp_port_len = (port[0] < 10 ? 1 : (port[0] < 100 ? 2 : 3 )) + 1 + (port[1] < 10 ? 1 : (port[1] < 100 ? 2 : 3 )); *ftp_ip_len = (ip_address[0] < 10 ? 1 : (ip_address[0] < 100 ? 2 : 3)) + 1 + (ip_address[1] < 10 ? 1 : (ip_address[1] < 100 ? 2 : 3)) + 1 + (ip_address[2] < 10 ? 1 : (ip_address[2] < 100 ? 2 : 3)) + 1 + (ip_address[3] < 10 ? 1 : (ip_address[3] < 100 ? 2 : 3)); ret = TRUE; break; } /* * Well, that didn't work. Skip the first number we found, * and keep trying. */ while ((c = *p) != '\0' && g_ascii_isdigit(c)) p++; } return ret; } static gboolean isvalid_rfc2428_delimiter(const guchar c) { /* RFC2428 sect. 2 states rules for a valid delimiter */ const gchar *forbidden = "0123456789abcdef.:"; if (!g_ascii_isgraph(c)) return FALSE; if (strchr(forbidden, g_ascii_tolower(c))) return FALSE; return TRUE; } /* * RFC2428 states... * * AF Number Protocol * --------- -------- * 1 Internet Protocol, Version 4 * 2 Internet Protocol, Version 6 * * AF Number Address Format Example * --------- -------------- ------- * 1 dotted decimal 132.235.1.2 * 2 IPv6 string 1080::8:800:200C:417A * representations * defined in * * The following are sample EPRT commands: * EPRT |1|132.235.1.2|6275| * EPRT |2|1080::8:800:200C:417A|5282| * * The first command specifies that the server should use IPv4 to open a * data connection to the host "132.235.1.2" on TCP port 6275. The * second command specifies that the server should use the IPv6 network * protocol and the network address "1080::8:800:200C:417A" to open a * TCP data connection on port 5282. * * ... which means in fact that RFC2428 is capable to handle both, * IPv4 and IPv6 so we have to care about the address family and properly * act depending on it. * */ static gboolean parse_eprt_request(const guchar* line, gint linelen, guint32 *eprt_af, guint32 *eprt_ip, guint16 *eprt_ipv6, guint16 *ftp_port, guint32 *eprt_ip_len, guint32 *ftp_port_len) { gint delimiters_seen = 0; gchar delimiter; gint fieldlen; gchar *field; gint n; gint lastn; char *args, *p; gboolean ret = TRUE; /* line contains the EPRT parameters, we need at least the 4 delimiters */ if (!line || linelen<4) return FALSE; /* Copy the rest of the line into a null-terminated buffer. */ args = wmem_strndup(wmem_packet_scope(), line, linelen); p = args; /* * Handle a NUL being in the line; if there's a NUL in the line, * strlen(args) will terminate at the NUL and will thus return * a value less than linelen. */ if ((gint)strlen(args) < linelen) linelen = (gint)strlen(args); /* * RFC2428 sect. 2 states ... * * The EPRT command keyword MUST be followed by a single space (ASCII * 32). Following the space, a delimiter character () MUST be * specified. * * ... the preceding is already stripped so we know that the first * character must be the delimiter and has just to be checked to be valid. */ if (!isvalid_rfc2428_delimiter(*p)) return FALSE; /* EPRT command does not follow a vaild delimiter; * malformed EPRT command - immediate escape */ delimiter = *p; /* Validate that the delimiter occurs 4 times in the string */ for (n = 0; n < linelen; n++) { if (*(p+n) == delimiter) delimiters_seen++; } if (delimiters_seen != 4) return FALSE; /* delimiter doesn't occur 4 times * probably no EPRT request - immediate escape */ /* we know that the first character is a delimiter... */ delimiters_seen = 1; lastn = 0; /* ... so we can start searching from the 2nd onwards */ for (n=1; n < linelen; n++) { if (*(p+n) != delimiter) continue; /* we found a delimiter */ delimiters_seen++; fieldlen = n - lastn - 1; if (fieldlen<=0) return FALSE; /* all fields must have data in them */ field = p + lastn + 1; if (delimiters_seen == 2) { /* end of address family field */ gchar *af_str; af_str = wmem_strndup(wmem_packet_scope(), field, fieldlen); if (!ws_strtou32(af_str, NULL, eprt_af)) return FALSE; } else if (delimiters_seen == 3) {/* end of IP address field */ gchar *ip_str; ip_str = wmem_strndup(wmem_packet_scope(), field, fieldlen); if (*eprt_af == EPRT_AF_IPv4) { if (str_to_ip(ip_str, eprt_ip)) ret = TRUE; else ret = FALSE; } else if (*eprt_af == EPRT_AF_IPv6) { if (str_to_ip6(ip_str, eprt_ipv6)) ret = TRUE; else ret = FALSE; } else return FALSE; /* invalid/unknown address family */ *eprt_ip_len = fieldlen; } else if (delimiters_seen == 4) {/* end of port field */ gchar *pt_str; pt_str = wmem_strndup(wmem_packet_scope(), field, fieldlen); if (!ws_strtou16(pt_str, NULL, ftp_port)) return FALSE; *ftp_port_len = fieldlen; } lastn = n; } return ret; } /* * RFC2428 states .... * * The first two fields contained in the parenthesis MUST be blank. The * third field MUST be the string representation of the TCP port number * on which the server is listening for a data connection. * * The network protocol used by the data connection will be the same network * protocol used by the control connection. In addition, the network * address used to establish the data connection will be the same * network address used for the control connection. * * An example response string follows: * * Entering Extended Passive Mode (|||6446|) * * ... which in fact means that again both address families IPv4 and IPv6 * are supported. But gladly it's not necessary to parse because it doesn't * occur in EPSV responses. We can leverage ftp_ip_address which is * protocol independent and already set. * */ static gboolean parse_extended_pasv_response(const guchar *line, gint linelen, guint16 *ftp_port, guint *pasv_offset, guint *ftp_port_len) { gint n; gchar *args; gchar *p; gchar *e; guchar c; gboolean ret = FALSE; gboolean delimiters_seen = FALSE; /* * Copy the rest of the line into a null-terminated buffer. */ args = wmem_strndup(wmem_packet_scope(), line, linelen); p = args; /* * Look for ( (Try to cope with '(' in description) */ for (; !delimiters_seen;) { guchar delimiter = '\0'; while ((c = *p) != '\0' && (c != '(')) p++; if (*p == '\0') { return FALSE; } /* Skip '(' */ p++; /* Make sure same delimiter is used 3 times */ for (n=0; n<3; n++) { if ((c = *p) != '\0') { if (delimiter == '\0' && isvalid_rfc2428_delimiter(c)) { delimiter = c; } if (c != delimiter) { break; } p++; } else { break; } } delimiters_seen = TRUE; } /* * Should now be at digits. */ if (*p != '\0') { const gchar* endptr; gboolean port_valid; /* * We didn't run out of text without finding anything. */ port_valid = ws_strtou16(p, &endptr, ftp_port); /* the conversion returned false, but the converted value could be valid instead, check it out */ if (!port_valid && *endptr == '|') port_valid = TRUE; if (port_valid) { *pasv_offset = (guint32)(p - args); ret = TRUE; /* get port string length */ if ((e=strchr(p,')')) == NULL) { ret = FALSE; } else { *ftp_port_len = (guint)(--e - p); } } } return ret; } /* Get the last character out of a string */ static gchar wmem_strbuf_get_last_char(wmem_strbuf_t *string) { gsize len = wmem_strbuf_get_len(string); if (len > 0) { const gchar *buf = wmem_strbuf_get_str(string); return buf[len-1]; } else { /* Error */ return '\0'; } } /* Get the nth character out of string */ static gchar wmem_strbuf_get_char_n(wmem_strbuf_t *string, size_t n) { if (n > wmem_strbuf_get_len(string)-1) { return '\0'; } else { return wmem_strbuf_get_str(string)[n]; } } /* Does the path end with the separator character? */ static gboolean ends_with_separator(wmem_strbuf_t *path) { if (wmem_strbuf_get_len(path) == 0) { return FALSE; } gchar last = wmem_strbuf_get_last_char(path); return last == '/'; } /* Does the path begin with the separator character? */ static gboolean begins_with_separator(wmem_strbuf_t *path) { if (wmem_strbuf_get_len(path) == 0) { return FALSE; } gchar first = wmem_strbuf_get_char_n(path, 0); return first == '/'; } /* Add new_path to the current working directory of the conversation, then normalise. */ /* N.B. could use e.g. g_build_path() here, but doesn't really buy us anything */ static void add_directory_to_conv(ftp_conversation_t *conv, const char *new_path) { wmem_strbuf_t *appended_path = wmem_strbuf_new(wmem_packet_scope(), NULL); if (!wmem_strbuf_get_len(conv->current_working_directory)) { /* Currently empty so just assign to new */ wmem_strbuf_append(conv->current_working_directory, new_path); return; } if (ends_with_separator(conv->current_working_directory)) { /* Ends in separator, so don't need to write one */ wmem_strbuf_append_printf(appended_path, "%s%s", wmem_strbuf_get_str(conv->current_working_directory), new_path); } else { /* Separator needed */ wmem_strbuf_append_printf(appended_path, "%s/%s", wmem_strbuf_get_str(conv->current_working_directory), new_path); } /* Now normalise, by going through the string one directory at a time. If see "..", remove it and the previous folder. If see ".", ignore it. */ guint offset; /* Initialise with empty path */ wmem_strbuf_t *normalised_directory = wmem_strbuf_new(wmem_file_scope(), NULL); wmem_strbuf_t *this_folder = wmem_strbuf_new(wmem_packet_scope(), NULL); offset = 0; /* If absolute, add root to this one too */ if (begins_with_separator(conv->current_working_directory)) { wmem_strbuf_append_c(normalised_directory, '/'); offset++; } /* Now go through the appended path, one directory at a time, and copy to normalised_directory */ for (; offset <= wmem_strbuf_get_len(appended_path); offset++) { gchar ch = wmem_strbuf_get_char_n(appended_path, offset); if ((offset == wmem_strbuf_get_len(appended_path)) || ch == '/' || ch == '\0') { /* Folder name is complete */ if (offset>0 && wmem_strbuf_get_len(this_folder) > 0) { /* Up a level. Rewind to before last directory - don't output this one */ if (strcmp(wmem_strbuf_get_str(this_folder), "..") == 0) { while (wmem_strbuf_get_len(normalised_directory) && !ends_with_separator(normalised_directory)) { wmem_strbuf_truncate(normalised_directory, wmem_strbuf_get_len(normalised_directory)-1); } /* Potentially skip left-over trailing '/' too */ if ((wmem_strbuf_get_len(normalised_directory) > 1) && (wmem_strbuf_get_last_char(normalised_directory) == '/')) { wmem_strbuf_truncate(normalised_directory, wmem_strbuf_get_len(normalised_directory)-1); } } /* Current directory - ignore */ else if (strcmp(wmem_strbuf_get_str(this_folder), ".") == 0) { /* Don't copy to normalised_directory */ } else { /* Regular directory name - copy this one out */ if (wmem_strbuf_get_len(normalised_directory) > 0 && !ends_with_separator(normalised_directory)) { wmem_strbuf_append_c(normalised_directory, '/'); } wmem_strbuf_append(normalised_directory, wmem_strbuf_get_str(this_folder)); } /* Reset folder name for next time */ this_folder = wmem_strbuf_new(wmem_packet_scope(), NULL); } } else { /* Keep copying this folder name */ wmem_strbuf_append_c(this_folder, ch); } if (ch == '\0') { /* Reached end - get out of loop */ break; } } /* Copy normalised path into conversation */ conv->current_working_directory = normalised_directory; } /* In response to the arg to a CWD command succeeding, update the conversation's current working directory */ static void process_cwd_success(ftp_conversation_t *conv, const char *new_path) { if (g_path_is_absolute(new_path)) { /* Just adopt new_path */ conv->current_working_directory = wmem_strbuf_new(wmem_file_scope(), new_path); } else { /* Add new_path to what we already have */ add_directory_to_conv(conv, new_path); } } /* When get a PWD command response, extract directory and set it in conversation. */ static void process_pwd_success(ftp_conversation_t *conv, const char *line, int linelen, packet_info *pinfo, proto_item *pi) { wmem_strbuf_t *output = wmem_strbuf_new(wmem_file_scope(), NULL); int offset; gboolean outputStarted = FALSE; /* Line must start with quotes */ if ((linelen < 2) || (line[0] != '"')) { expert_add_info(pinfo, pi, &ei_ftp_pwd_response_invalid); return; } /* For each character */ for (offset=0; (offset < linelen) && (line[offset] != '\r') && (line[offset] != '\n'); offset++) { if (line[offset] == '"') { if ((offset+1 < linelen) && (line[offset+1] == '"')) { /* Double, so output one */ wmem_strbuf_append_c(output, '"'); offset++; } else { if (outputStarted) { /* End of path */ break; } outputStarted = TRUE; } } else { /* Part of path - append */ wmem_strbuf_append_c(output, line[offset]); } } /* Make sure output ends in " */ if (offset >= linelen || line[offset] != '"') { expert_add_info(pinfo, pi, &ei_ftp_pwd_response_invalid); return; } /* Save result */ conv->current_working_directory = output; } /* Associate the conversation's current working directory with the given packet */ static void store_directory_in_packet(packet_info *pinfo, ftp_conversation_t *p_ftp_conv) { ftp_packet_data_t *p_packet_data = wmem_new0(wmem_file_scope(), ftp_packet_data_t); /* Take deep copy of current path, and associate with this packet */ p_packet_data->current_working_directory = wmem_strbuf_new(wmem_file_scope(), wmem_strbuf_get_str(p_ftp_conv->current_working_directory)); p_add_proto_data(wmem_file_scope(), pinfo, proto_ftp, 0, p_packet_data); } static int dissect_ftp(tvbuff_t *tvb, packet_info *pinfo, proto_tree *tree, void* data _U_) { gboolean is_request; proto_tree *ftp_tree; proto_tree *reqresp_tree; proto_item *ti, *hidden_item; gint offset; const guchar *line; guint32 code; gchar code_str[4]; gboolean is_port_request = FALSE; gboolean is_eprt_request = FALSE; gboolean is_pasv_response = FALSE; gboolean is_epasv_response = FALSE; gint next_offset; int linelen; int tokenlen = 0; const guchar *next_token; guint32 pasv_ip; guint32 pasv_offset; guint32 ftp_ip; guint32 ftp_ip_len; guint32 eprt_offset; guint32 eprt_af = 0; guint32 eprt_ip; guint16 eprt_ipv6[8]; guint32 eprt_ip_len = 0; guint16 ftp_port; guint32 ftp_port_len; address ftp_ip_address; gboolean ftp_nat; copy_address_shallow(&ftp_ip_address, &pinfo->src); if (pinfo->match_uint == pinfo->destport) is_request = TRUE; else is_request = FALSE; col_set_str(pinfo->cinfo, COL_PROTOCOL, "FTP"); /* Get the conversation */ ftp_conversation_t *p_ftp_conv = find_or_create_ftp_conversation(pinfo); /* Store the current working directory */ if (!pinfo->fd->flags.visited) { store_directory_in_packet(pinfo, p_ftp_conv); } /* * Find the end of the first line. * * Note that "tvb_find_line_end()" will return a value that is * not longer than what's in the buffer, so the "tvb_get_ptr()" * call won't throw an exception. */ linelen = tvb_find_line_end(tvb, 0, -1, &next_offset, FALSE); line = tvb_get_ptr(tvb, 0, linelen); /* * Put the first line from the buffer into the summary * (but leave out the line terminator). */ col_add_fstr(pinfo->cinfo, COL_INFO, "%s: %s", is_request ? "Request" : "Response", format_text(wmem_packet_scope(), line, linelen)); ti = proto_tree_add_item(tree, proto_ftp, tvb, 0, -1, ENC_NA); ftp_tree = proto_item_add_subtree(ti, ett_ftp); hidden_item = proto_tree_add_boolean(ftp_tree, hf_ftp_request, tvb, 0, 0, is_request); PROTO_ITEM_SET_HIDDEN(hidden_item); hidden_item = proto_tree_add_boolean(ftp_tree, hf_ftp_response, tvb, 0, 0, is_request == FALSE); PROTO_ITEM_SET_HIDDEN(hidden_item); /* Put the line into the protocol tree. */ ti = proto_tree_add_format_text(ftp_tree, tvb, 0, next_offset); reqresp_tree = proto_item_add_subtree(ti, ett_ftp_reqresp); if (is_request) { /* * Extract the first token, and, if there is a first * token, add it as the request. */ tokenlen = get_token_len(line, line + linelen, &next_token); if (tokenlen != 0) { proto_tree_add_item(reqresp_tree, hf_ftp_request_command, tvb, 0, tokenlen, ENC_ASCII|ENC_NA); if (strncmp(line, "PORT", tokenlen) == 0) is_port_request = TRUE; /* * EPRT request command, as per RFC 2428 */ else if (strncmp(line, "EPRT", tokenlen) == 0) is_eprt_request = TRUE; } /* If there is an ftp data conversation that doesn't have a command yet, attempt to update here */ if (p_ftp_conv) { p_ftp_conv->last_command = wmem_strndup(wmem_file_scope(), line, linelen); p_ftp_conv->last_command_frame = pinfo->num; } /* And make sure set for FTP data conversation */ if (p_ftp_conv && p_ftp_conv->current_data_conv && !p_ftp_conv->current_data_conv->command) { /* Store command and frame where it happened */ p_ftp_conv->current_data_conv->command = wmem_strndup(wmem_file_scope(), line, linelen); p_ftp_conv->current_data_conv->command_frame = pinfo->num; /* Add to table to ftp-data response can be shown with this frame on later passes */ g_hash_table_insert(ftp_command_to_data_hash, GUINT_TO_POINTER(pinfo->num), p_ftp_conv->current_data_conv); g_hash_table_insert(ftp_command_to_data_hash, GUINT_TO_POINTER(p_ftp_conv->current_data_setup_frame), p_ftp_conv->current_data_conv); } } else { /* * This is a response; the response code is 3 digits, * followed by a space or hyphen, possibly followed by * text. * * If the line doesn't start with 3 digits, it's part of * a continuation. * * XXX - keep track of state in the first pass, and * treat non-continuation lines not beginning with digits * as errors? */ if (linelen >= 3 && g_ascii_isdigit(line[0]) && g_ascii_isdigit(line[1]) && g_ascii_isdigit(line[2])) { gboolean code_valid; proto_item* pi; /* * One-line reply, or first or last line * of a multi-line reply. */ tvb_get_nstringz0(tvb, 0, sizeof(code_str), code_str); code_valid = ws_strtou32(code_str, NULL, &code); pi = proto_tree_add_uint(reqresp_tree, hf_ftp_response_code, tvb, 0, 3, code); if (!code_valid) expert_add_info(pinfo, pi, &ei_ftp_response_code_invalid); /* * See if it's a passive-mode response. * * XXX - does anybody do FOOBAR, as per RFC * 1639, or has that been supplanted by RFC 2428? */ if (code == 227) is_pasv_response = TRUE; /* * Responses to EPSV command, as per RFC 2428 */ if (code == 229) is_epasv_response = TRUE; /* * Responses to CWD command. */ if (code == 250) { if (!pinfo->fd->flags.visited) { if (p_ftp_conv && p_ftp_conv->last_command) { /* Explicit Change Working Directory command */ if (strncmp(p_ftp_conv->last_command, "CWD ", 4) == 0) { process_cwd_success(p_ftp_conv, p_ftp_conv->last_command+4); /* Update path in packet */ if (!pinfo->fd->flags.visited) { store_directory_in_packet(pinfo, p_ftp_conv); } } /* Change Directory Up command (i.e. "CWD ..") */ else if (strncmp(p_ftp_conv->last_command, "CDUP", 4) == 0) { process_cwd_success(p_ftp_conv, ".."); /* Update path in packet */ if (!pinfo->fd->flags.visited) { store_directory_in_packet(pinfo, p_ftp_conv); } } } } } /* * Responses to PWD command. Overwrite whatever is stored - this is the truth! */ if (code == 257) { if (!pinfo->fd->flags.visited) { if (p_ftp_conv && linelen >= 4) { /* Want directory name, which will be between " " */ process_pwd_success(p_ftp_conv, line+4, linelen-4, pinfo, pi); /* Update path in packet */ if (!pinfo->fd->flags.visited) { store_directory_in_packet(pinfo, p_ftp_conv); } } } } /* * Skip the 3 digits and, if present, the * space or hyphen. */ if (linelen >= 4) next_token = line + 4; else next_token = line + linelen; } else { /* * Line doesn't start with 3 digits; assume it's * a line in the middle of a multi-line reply. */ next_token = line; } } offset = (gint) (next_token - line); linelen -= (int) (next_token - line); line = next_token; /* * Add the rest of the first line as request or * reply data. */ if (linelen != 0) { if (is_request) { proto_tree_add_item(reqresp_tree, hf_ftp_request_arg, tvb, offset, linelen, ENC_ASCII|ENC_NA); } else { proto_tree_add_item(reqresp_tree, hf_ftp_response_arg, tvb, offset, linelen, ENC_ASCII|ENC_NA); } } offset = next_offset; /* * If this is a PORT request or a PASV response, handle it. */ if (is_port_request) { if (parse_port_pasv(line, linelen, &ftp_ip, &ftp_port, &pasv_offset, &ftp_ip_len, &ftp_port_len)) { proto_tree_add_ipv4(reqresp_tree, hf_ftp_active_ip, tvb, pasv_offset + (tokenlen+1) , ftp_ip_len, ftp_ip); proto_tree_add_uint(reqresp_tree, hf_ftp_active_port, tvb, pasv_offset + 1 + (tokenlen+1) + ftp_ip_len, ftp_port_len, ftp_port); set_address(&ftp_ip_address, AT_IPv4, 4, (const guint8 *)&ftp_ip); ftp_nat = !addresses_equal(&pinfo->src, &ftp_ip_address); if (ftp_nat) { proto_tree_add_boolean(reqresp_tree, hf_ftp_active_nat, tvb, 0, 0, ftp_nat); } /* Set up data conversation */ create_and_link_data_conversation(pinfo, &pinfo->dst, 20, &ftp_ip_address, ftp_port, "PORT"); } } if (is_pasv_response) { if (linelen != 0) { /* * This frame contains a PASV response; set up a * conversation for the data. */ if (parse_port_pasv(line, linelen, &pasv_ip, &ftp_port, &pasv_offset, &ftp_ip_len, &ftp_port_len)) { proto_tree_add_ipv4(reqresp_tree, hf_ftp_pasv_ip, tvb, pasv_offset + 4, ftp_ip_len, pasv_ip); proto_tree_add_uint(reqresp_tree, hf_ftp_pasv_port, tvb, pasv_offset + 4 + 1 + ftp_ip_len, ftp_port_len, ftp_port); set_address(&ftp_ip_address, AT_IPv4, 4, (const guint8 *)&pasv_ip); ftp_nat = !addresses_equal(&pinfo->src, &ftp_ip_address); if (ftp_nat) { proto_tree_add_boolean(reqresp_tree, hf_ftp_pasv_nat, tvb, 0, 0, ftp_nat); } create_and_link_data_conversation(pinfo, &ftp_ip_address, ftp_port, &pinfo->dst, pinfo->destport, "PASV"); } } } if (is_eprt_request) { /* * RFC2428 - sect. 2 * This frame contains a EPRT request; let's dissect it and set up a * conversation for the data connection. */ if (parse_eprt_request(line, linelen, &eprt_af, &eprt_ip, eprt_ipv6, &ftp_port, &eprt_ip_len, &ftp_port_len)) { /* since parse_eprt_request() returned TRUE, we know that we have a valid address family */ eprt_offset = tokenlen + 1 + 1; /* token, space, 1st delimiter */ proto_tree_add_uint(reqresp_tree, hf_ftp_eprt_af, tvb, eprt_offset, 1, eprt_af); eprt_offset += 1 + 1; /* addr family, 2nd delimiter */ if (eprt_af == EPRT_AF_IPv4) { proto_tree_add_ipv4(reqresp_tree, hf_ftp_eprt_ip, tvb, eprt_offset, eprt_ip_len, eprt_ip); set_address(&ftp_ip_address, AT_IPv4, 4, (const guint8 *)&eprt_ip); } else if (eprt_af == EPRT_AF_IPv6) { proto_tree_add_ipv6(reqresp_tree, hf_ftp_eprt_ipv6, tvb, eprt_offset, eprt_ip_len, (const ws_in6_addr *)eprt_ipv6); set_address(&ftp_ip_address, AT_IPv6, 16, eprt_ipv6); } eprt_offset += eprt_ip_len + 1; /* addr, 3rd delimiter */ proto_tree_add_uint(reqresp_tree, hf_ftp_eprt_port, tvb, eprt_offset, ftp_port_len, ftp_port); /* Set up data conversation */ create_and_link_data_conversation(pinfo, &pinfo->src, ftp_port, &ftp_ip_address, 0, "EPRT"); } else { proto_tree_add_expert(reqresp_tree, pinfo, &ei_ftp_eprt_args_invalid, tvb, offset - linelen - 1, linelen); } } if (is_epasv_response) { if (linelen != 0) { proto_item *addr_it; /* * RFC2428 - sect. 3 * This frame contains an EPSV response; set up a * conversation for the data. */ if (parse_extended_pasv_response(line, linelen, &ftp_port, &pasv_offset, &ftp_port_len)) { /* Add IP address and port number to tree */ if (ftp_ip_address.type == AT_IPv4) { guint32 addr; memcpy(&addr, ftp_ip_address.data, 4); addr_it = proto_tree_add_ipv4(reqresp_tree, hf_ftp_epsv_ip, tvb, 0, 0, addr); PROTO_ITEM_SET_GENERATED(addr_it); } else if (ftp_ip_address.type == AT_IPv6) { addr_it = proto_tree_add_ipv6(reqresp_tree, hf_ftp_epsv_ipv6, tvb, 0, 0, (const ws_in6_addr *)ftp_ip_address.data); PROTO_ITEM_SET_GENERATED(addr_it); } proto_tree_add_uint(reqresp_tree, hf_ftp_epsv_port, tvb, pasv_offset + 4, ftp_port_len, ftp_port); /* Set up data conversation */ create_and_link_data_conversation(pinfo, &ftp_ip_address, ftp_port, &pinfo->dst, 0, "EPASV"); } else { proto_tree_add_expert(reqresp_tree, pinfo, &ei_ftp_epsv_args_invalid, tvb, offset - linelen - 1, linelen); } } } /* * Show the rest of the request or response as text, * a line at a time. * XXX - only if there's a continuation indicator? */ while (tvb_offset_exists(tvb, offset)) { /* * Find the end of the line. */ tvb_find_line_end(tvb, offset, -1, &next_offset, FALSE); /* * Put this line. */ proto_tree_add_format_text(ftp_tree, tvb, offset, next_offset - offset); offset = next_offset; } /* Show current working directory */ ftp_packet_data_t *ftp_packet_data = (ftp_packet_data_t *)p_get_proto_data(wmem_file_scope(), pinfo, proto_ftp, 0); if (ftp_packet_data != NULL) { /* Should always be set.. */ if (ftp_packet_data->current_working_directory) { proto_item *cwd_ti = proto_tree_add_string(tree, hf_ftp_current_working_directory, tvb, 0, 0, wmem_strbuf_get_str(ftp_packet_data->current_working_directory)); PROTO_ITEM_SET_GENERATED(cwd_ti); } } /* If this is a command resulting in an ftp-data stream, show details */ if (pinfo->fd->flags.visited) { /* Look up what has been stored for this frame */ ftp_data_conversation_t *ftp_data = (ftp_data_conversation_t *)g_hash_table_lookup(ftp_command_to_data_hash, GUINT_TO_POINTER(pinfo->num)); if (ftp_data) { /* Show these for the command frame only */ if (pinfo->num == ftp_data->command_frame) { /* Number of frames */ ti = proto_tree_add_uint(tree, hf_ftp_command_response_frames, tvb, 0, 0, ftp_data->frames_seen); PROTO_ITEM_SET_GENERATED(ti); /* First frame */ ti = proto_tree_add_uint(tree, hf_ftp_command_response_first_frame_num, tvb, 0, 0, ftp_data->first_frame_num); PROTO_ITEM_SET_GENERATED(ti); /* Last frame */ ti = proto_tree_add_uint(tree, hf_ftp_command_response_last_frame_num, tvb, 0, 0, ftp_data->last_frame_num); PROTO_ITEM_SET_GENERATED(ti); /* Length of stream */ if (ftp_data->frames_seen > 1) { /* Work out gap between frames */ gint seconds = (gint) (ftp_data->last_frame_time.secs - ftp_data->first_frame_time.secs); gint nseconds = ftp_data->last_frame_time.nsecs - ftp_data->first_frame_time.nsecs; /* Round gap to nearest ms. */ gint gap_ms = (seconds*1000) + ((nseconds+500000) / 1000000); ti = proto_tree_add_uint(tree, hf_ftp_command_response_duration, tvb, 0, 0, gap_ms); PROTO_ITEM_SET_GENERATED(ti); } ti = proto_tree_add_uint(tree, hf_ftp_command_setup_frame, tvb, 0, 0, ftp_data->setup_frame); PROTO_ITEM_SET_GENERATED(ti); } /* Show this only under the setup frame */ if (pinfo->num == ftp_data->setup_frame) { ti = proto_tree_add_string(tree, hf_ftp_command_command, tvb, 0, 0, ftp_data->command); PROTO_ITEM_SET_GENERATED(ti); ti = proto_tree_add_uint(tree, hf_ftp_command_command_frame, tvb, 0, 0, ftp_data->command_frame); PROTO_ITEM_SET_GENERATED(ti); } } } return tvb_captured_length(tvb); } static int dissect_ftpdata(tvbuff_t *tvb, packet_info *pinfo, proto_tree *tree, void* data _U_) { proto_item *data_ti, *ti; int data_length = tvb_captured_length(tvb); gboolean is_text = TRUE; gint check_chars, i; conversation_t *p_conv; ftp_data_conversation_t *p_ftp_data_conv; col_set_str(pinfo->cinfo, COL_PROTOCOL, "FTP-DATA"); col_add_fstr(pinfo->cinfo, COL_INFO, "FTP Data: %u bytes", tvb_reported_length(tvb)); data_ti = proto_tree_add_item(tree, proto_ftp_data, tvb, 0, -1, ENC_NA); /* Link back to setup of this stream */ p_conv = find_conversation_pinfo(pinfo, 0); if (p_conv) { /* Link back to FTP frame where this conversation was created */ ti = proto_tree_add_uint(tree, hf_ftp_data_setup_frame, tvb, 0, 0, p_conv->setup_frame); PROTO_ITEM_SET_GENERATED(ti); p_ftp_data_conv = (ftp_data_conversation_t*)conversation_get_proto_data(p_conv, proto_ftp_data); if (p_ftp_data_conv) { /* First time around, update info. */ if (!pinfo->fd->flags.visited) { if (!p_ftp_data_conv->first_frame_num) { p_ftp_data_conv->first_frame_num = pinfo->num; p_ftp_data_conv->first_frame_time = pinfo->abs_ts; } if (pinfo->num > p_ftp_data_conv->last_frame_num) { p_ftp_data_conv->last_frame_num = pinfo->num; p_ftp_data_conv->last_frame_time = pinfo->abs_ts; } p_ftp_data_conv->frames_seen++; /* Also store setup_frame here for benefit of ftp (control) */ p_ftp_data_conv->setup_frame = p_conv->setup_frame; } /* Show setup method as field and in info column */ if (p_ftp_data_conv->setup_method) { ti = proto_tree_add_string(tree, hf_ftp_data_setup_method, tvb, 0, 0, p_ftp_data_conv->setup_method); col_append_fstr(pinfo->cinfo, COL_INFO, " (%s)", p_ftp_data_conv->setup_method); PROTO_ITEM_SET_GENERATED(ti); } /* Show command in info column */ if (p_ftp_data_conv->command) { ti = proto_tree_add_string(tree, hf_ftp_data_command, tvb, 0, 0, p_ftp_data_conv->command); PROTO_ITEM_SET_GENERATED(ti); col_append_fstr(pinfo->cinfo, COL_INFO, " (%s)", p_ftp_data_conv->command); proto_tree_add_uint(tree, hf_ftp_data_command_frame, tvb, 0, 0, p_ftp_data_conv->command_frame); PROTO_ITEM_SET_GENERATED(ti); } /* Show current working directory */ if (p_ftp_data_conv->current_working_directory) { ti = proto_tree_add_string(tree, hf_ftp_data_current_working_directory, tvb, 0, 0, wmem_strbuf_get_str(p_ftp_data_conv->current_working_directory)); PROTO_ITEM_SET_GENERATED(ti); } } } /* Check the first few chars to see whether it looks like a text file or output */ check_chars = MIN(10, data_length); for (i=0; i < check_chars; i++) { guint8 c = tvb_get_guint8(tvb, i); if (c!='\r' && c!='\n' && !g_ascii_isprint(c)) { is_text = FALSE; break; } } /* Show the number of bytes */ proto_item_append_text(data_ti, " (%u bytes data)", data_length); /* Show line-by-line if text */ if (is_text) { call_dissector(data_text_lines_handle, tvb, pinfo, tree); } return data_length; } static void ftp_init_protocol(void) { ftp_command_to_data_hash = g_hash_table_new(g_direct_hash, g_direct_equal); } static void ftp_cleanup_protocol(void) { g_hash_table_destroy(ftp_command_to_data_hash); } void proto_register_ftp(void) { static hf_register_info hf[] = { { &hf_ftp_current_working_directory, { "Current working directory", "ftp.current-working-directory", FT_STRING, BASE_NONE, NULL, 0, NULL, HFILL }}, { &hf_ftp_response, { "Response", "ftp.response", FT_BOOLEAN, BASE_NONE, NULL, 0x0, "TRUE if FTP response", HFILL }}, { &hf_ftp_request, { "Request", "ftp.request", FT_BOOLEAN, BASE_NONE, NULL, 0x0, "TRUE if FTP request", HFILL }}, { &hf_ftp_request_command, { "Request command", "ftp.request.command", FT_STRING, BASE_NONE, NULL, 0x0, NULL, HFILL }}, { &hf_ftp_request_arg, { "Request arg", "ftp.request.arg", FT_STRING, BASE_NONE, NULL, 0x0, NULL, HFILL }}, { &hf_ftp_response_code, { "Response code", "ftp.response.code", FT_UINT32, BASE_DEC|BASE_EXT_STRING, &response_table_ext, 0x0, NULL, HFILL }}, { &hf_ftp_response_arg, { "Response arg", "ftp.response.arg", FT_STRING, BASE_NONE, NULL, 0x0, NULL, HFILL }}, { &hf_ftp_pasv_ip, { "Passive IP address", "ftp.passive.ip", FT_IPv4, BASE_NONE, NULL,0x0, "Passive IP address (check NAT)", HFILL}}, { &hf_ftp_pasv_port, { "Passive port", "ftp.passive.port", FT_UINT16, BASE_DEC, NULL,0x0, "Passive FTP server port", HFILL }}, { &hf_ftp_pasv_nat, {"Passive IP NAT", "ftp.passive.nat", FT_BOOLEAN, BASE_NONE, NULL, 0x0, "NAT is active SIP and passive IP different", HFILL }}, { &hf_ftp_active_ip, { "Active IP address", "ftp.active.cip", FT_IPv4, BASE_NONE, NULL, 0x0, "Active FTP client IP address", HFILL }}, { &hf_ftp_active_port, {"Active port", "ftp.active.port", FT_UINT16, BASE_DEC, NULL, 0x0, "Active FTP client port", HFILL }}, { &hf_ftp_active_nat, { "Active IP NAT", "ftp.active.nat", FT_BOOLEAN, BASE_NONE, NULL, 0x0, "NAT is active", HFILL}}, { &hf_ftp_eprt_af, { "Extended active address family", "ftp.eprt.af", FT_UINT8, BASE_DEC, VALS(eprt_af_vals), 0, NULL, HFILL }}, { &hf_ftp_eprt_ip, { "Extended active IP address", "ftp.eprt.ip", FT_IPv4, BASE_NONE, NULL, 0, "Extended active FTP client IPv4 address", HFILL }}, { &hf_ftp_eprt_ipv6, { "Extended active IPv6 address", "ftp.eprt.ipv6", FT_IPv6, BASE_NONE, NULL, 0, "Extended active FTP client IPv6 address", HFILL }}, { &hf_ftp_eprt_port, { "Extended active port", "ftp.eprt.port", FT_UINT16, BASE_DEC, NULL, 0, "Extended active FTP client listener port", HFILL }}, { &hf_ftp_epsv_ip, { "Extended passive IPv4 address", "ftp.epsv.ip", FT_IPv4, BASE_NONE, NULL, 0, "Extended passive FTP server IPv4 address", HFILL }}, { &hf_ftp_epsv_ipv6, { "Extended passive IPv6 address", "ftp.epsv.ipv6", FT_IPv6, BASE_NONE, NULL, 0, "Extended passive FTP server IPv6 address", HFILL }}, { &hf_ftp_epsv_port, { "Extended passive port", "ftp.epsv.port", FT_UINT16, BASE_DEC, NULL, 0, "Extended passive FTP server port", HFILL }}, { &hf_ftp_command_response_first_frame_num, { "Command response first frame", "ftp.command-response.first-frame-num", FT_FRAMENUM, BASE_NONE, FRAMENUM_TYPE(FT_FRAMENUM_RESPONSE), 0, "First frame seen in resulting ftp-data stream", HFILL }}, { &hf_ftp_command_response_last_frame_num, { "Command response last frame", "ftp.command-response.last-frame-num", FT_FRAMENUM, BASE_NONE, FRAMENUM_TYPE(FT_FRAMENUM_RESPONSE), 0, "Last frame seen in resulting ftp-data stream", HFILL }}, { &hf_ftp_command_response_duration, { "Response duration", "ftp.command-response.duration", FT_UINT32, BASE_DEC|BASE_UNIT_STRING, &units_milliseconds, 0, "Duration of command response in ms", HFILL }}, { &hf_ftp_command_response_frames, { "Command response frames", "ftp.command-response.frames", FT_UINT32, BASE_DEC, NULL, 0, "Number of frames seen in resulting ftp-data stream", HFILL }}, { &hf_ftp_command_setup_frame, { "Setup frame", "ftp.setup-frame", FT_FRAMENUM, BASE_NONE, FRAMENUM_TYPE(FT_FRAMENUM_REQUEST), 0, "Where ftp-data conversation for this command was signalled", HFILL }}, { &hf_ftp_command_command_frame, { "Command frame", "ftp.command-frame", FT_FRAMENUM, BASE_NONE, FRAMENUM_TYPE(FT_FRAMENUM_REQUEST), 0, "Where command for setup was seen", HFILL }}, { &hf_ftp_command_command, { "Command", "ftp.command", FT_STRING, BASE_NONE, NULL, 0, "Command corresponding to this setup frame", HFILL }}, }; static gint *ett[] = { &ett_ftp, &ett_ftp_reqresp }; static hf_register_info data_hf[] = { { &hf_ftp_data_setup_frame, { "Setup frame", "ftp-data.setup-frame", FT_FRAMENUM, BASE_NONE, NULL, 0, "Where ftp-data conversation was signalled", HFILL }}, { &hf_ftp_data_setup_method, { "Setup method", "ftp-data.setup-method", FT_STRING, BASE_NONE, NULL, 0, "Method used to set up data conversation", HFILL }}, { &hf_ftp_data_command, { "Command", "ftp-data.command", FT_STRING, BASE_NONE, NULL, 0, "Command that this data stream answers", HFILL }}, { &hf_ftp_data_command_frame, { "Command frame", "ftp-data.command-frame", FT_FRAMENUM, BASE_NONE, NULL, 0, "Where command for this data was seen", HFILL }}, { &hf_ftp_data_current_working_directory, { "Current working directory", "ftp-data.current-working-directory", FT_STRING, BASE_NONE, NULL, 0, "Current working directory at time of command", HFILL }} }; static ei_register_info ei[] = { { &ei_ftp_eprt_args_invalid, { "ftp.eprt.args_invalid", PI_MALFORMED, PI_WARN, "EPRT arguments must have the form: ||||", EXPFILL }}, { &ei_ftp_epsv_args_invalid, { "ftp.epsv.args_invalid", PI_MALFORMED, PI_WARN, "EPSV arguments must have the form (||||)", EXPFILL }}, { &ei_ftp_response_code_invalid, { "ftp.response.code.invalid", PI_MALFORMED, PI_ERROR, "Invalid response code", EXPFILL }}, { &ei_ftp_pwd_response_invalid, { "ftp.response.pwd.invalid", PI_MALFORMED, PI_ERROR, "Invalid PWD response", EXPFILL }} }; expert_module_t* expert_ftp; proto_ftp = proto_register_protocol("File Transfer Protocol (FTP)", "FTP", "ftp"); ftp_handle = register_dissector("ftp", dissect_ftp, proto_ftp); proto_ftp_data = proto_register_protocol("FTP Data", "FTP-DATA", "ftp-data"); ftpdata_handle = register_dissector("ftp-data", dissect_ftpdata, proto_ftp_data); proto_register_field_array(proto_ftp, hf, array_length(hf)); proto_register_field_array(proto_ftp, data_hf, array_length(data_hf)); proto_register_subtree_array(ett, array_length(ett)); expert_ftp = expert_register_protocol(proto_ftp); expert_register_field_array(expert_ftp, ei, array_length(ei)); register_init_routine(&ftp_init_protocol); register_cleanup_routine(&ftp_cleanup_protocol); } void proto_reg_handoff_ftp(void) { dissector_add_uint_with_preference("tcp.port", TCP_PORT_FTPDATA, ftpdata_handle); dissector_add_uint_with_preference("tcp.port", TCP_PORT_FTP, ftp_handle); data_text_lines_handle = find_dissector_add_dependency("data-text-lines", proto_ftp_data); } /* * Editor modelines - http://www.wireshark.org/tools/modelines.html * * Local variables: * c-basic-offset: 4 * tab-width: 8 * indent-tabs-mode: nil * End: * * vi: set shiftwidth=4 tabstop=8 expandtab: * :indentSize=4:tabSize=8:noTabs=true: */