/* errno.c * String descriptions for errno values. * * Wireshark - Network traffic analyzer * By Gerald Combs * Copyright 1998 Gerald Combs * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. */ #include "config.h" #include /* Note: sorted in (unsigned) ascending order with no gaps to enable direct, * array-indexed access. */ static const value_string linux_negative_errno_vals[] = { /* from include/uapi/asm-generic/errno.h */ { -133, "Memory page has hardware error (-EHWPOISON)" }, { -132, "Operation not possible due to RF-kill (-ERFKILL)" }, { -131, "State not recoverable (-ENOTRECOVERABLE)" }, { -130, "Owner died (-EOWNERDEAD)" }, { -129, "Key was rejected by service (-EKEYREJECTED)" }, { -128, "Key has been revoked (-EKEYREVOKED)" }, { -127, "Key has expired (-EKEYEXPIRED)" }, { -126, "Required key not available (-ENOKEY)" }, { -125, "Operation Canceled (-ECANCELED)" }, { -124, "Wrong medium type (-EMEDIUMTYPE)" }, { -123, "No medium found (-ENOMEDIUM)" }, { -122, "Quota exceeded (-EDQUOT)" }, { -121, "Remote I/O error (-EREMOTEIO)" }, { -120, "Is a named type file (-EISNAM)" }, { -119, "No XENIX semaphores available (-ENAVAIL)" }, { -118, "Not a XENIX named type file (-ENOTNAM)" }, { -117, "Structure needs cleaning (-EUCLEAN)" }, { -116, "Stale file handle (-ESTALE)" }, { -115, "Operation now in progress (-EINPROGRESS)" }, { -114, "Operation already in progress (-EALREADY)" }, { -113, "No route to host (-EHOSTUNREACH)" }, { -112, "Host is down (-EHOSTDOWN)" }, { -111, "Connection refused (-ECONNREFUSED)" }, { -110, "Connection timed out (-ETIMEDOUT)" }, { -109, "Too many references: cannot splice (-ETOOMANYREFS)" }, { -108, "Cannot send after transport endpoint shutdown (-ESHUTDOWN)" }, { -107, "Transport endpoint is not connected (-ENOTCONN)" }, { -106, "Transport endpoint is already connected (-EISCONN)" }, { -105, "No buffer space available (-ENOBUFS)" }, { -104, "Connection reset by peer (-ECONNRESET)" }, { -103, "Software caused connection abort (-ECONNABORTED)" }, { -102, "Network dropped connection because of reset (-ENETRESET)" }, { -101, "Network is unreachable (-ENETUNREACH)" }, { -100, "Network is down (-ENETDOWN)" }, { -99, "Cannot assign requested address (-EADDRNOTAVAIL)" }, { -98, "Address already in use (-EADDRINUSE)" }, { -97, "Address family not supported by protocol (-EAFNOSUPPORT)" }, { -96, "Protocol family not supported (-EPFNOSUPPORT)" }, { -95, "Operation not supported on transport endpoint (-EOPNOTSUPP)" }, { -94, "Socket type not supported (-ESOCKTNOSUPPORT)" }, { -93, "Protocol not supported (-EPROTONOSUPPORT)" }, { -92, "Protocol not available (-ENOPROTOOPT)" }, { -91, "Protocol wrong type for socket (-EPROTOTYPE)" }, { -90, "Message too long (-EMSGSIZE)" }, { -89, "Destination address required (-EDESTADDRREQ)" }, { -88, "Socket operation on non-socket (-ENOTSOCK)" }, { -87, "Too many users (-EUSERS)" }, { -86, "Streams pipe error (-ESTRPIPE)" }, { -85, "Interrupted system call should be restarted (-ERESTART)" }, { -84, "Illegal byte sequence (-EILSEQ)" }, { -83, "Cannot exec a shared library directly (-ELIBEXEC)" }, { -82, "Attempting to link in too many shared libraries (-ELIBMAX)" }, { -81, ".lib section in a.out corrupted (-ELIBSCN)" }, { -80, "Accessing a corrupted shared library (-ELIBBAD)" }, { -79, "Can not access a needed shared library (-ELIBACC)" }, { -78, "Remote address changed (-EREMCHG)" }, { -77, "File descriptor in bad state (-EBADFD)" }, { -76, "Name not unique on network (-ENOTUNIQ)" }, { -75, "Value too large for defined data type (-EOVERFLOW)" }, { -74, "Not a data message (-EBADMSG)" }, { -73, "RFS specific error (-EDOTDOT)" }, { -72, "Multihop attempted (-EMULTIHOP)" }, { -71, "Protocol error (-EPROTO)" }, { -70, "Communication error on send (-ECOMM)" }, { -69, "Srmount error (-ESRMNT)" }, { -68, "Advertise error (-EADV)" }, { -67, "Link has been severed (-ENOLINK)" }, { -66, "Object is remote (-EREMOTE)" }, { -65, "Package not installed (-ENOPKG)" }, { -64, "Machine is not on the network (-ENONET)" }, { -63, "Out of streams resources (-ENOSR)" }, { -62, "Timer expired (-ETIME)" }, { -61, "No data available (-ENODATA)" }, { -60, "Device not a stream (-ENOSTR)" }, { -59, "Bad font file format (-EBFONT)" }, { -58, "(-58 \?\?\?)" }, /* dummy so that there are no "gaps" */ { -57, "Invalid slot (-EBADSLT)" }, { -56, "Invalid request code (-EBADRQC)" }, { -55, "No anode (-ENOANO)" }, { -54, "Exchange full (-EXFULL)" }, { -53, "Invalid request descriptor (-EBADR)" }, { -52, "Invalid exchange (-EBADE)" }, { -51, "Level 2 halted (-EL2HLT)" }, { -50, "No CSI structure available (-ENOCSI)" }, { -49, "Protocol driver not attached (-EUNATCH)" }, { -48, "Link number out of range (-ELNRNG)" }, { -47, "Level 3 reset (-EL3RST)" }, { -46, "Level 3 halted (-EL3HLT)" }, { -45, "Level 2 not synchronized (-EL2NSYNC)" }, { -44, "Channel number out of range (-ECHRNG)" }, { -43, "Identifier removed (-EIDRM)" }, { -42, "No message of desired type (-ENOMSG)" }, { -41, "(-41 \?\?\?)" }, /* dummy so that there are no "gaps" */ { -40, "Too many symbolic links encountered (-ELOOP)" }, { -39, "Directory not empty (-ENOTEMPTY)" }, { -38, "Invalid system call number (-ENOSYS)" }, { -37, "No record locks available (-ENOLCK)" }, { -36, "File name too long (-ENAMETOOLONG)" }, { -35, "Resource deadlock would occur (-EDEADLK)" }, /* from include/uapi/asm-generic/errno-base.h */ { -34, "Math result not representable (-ERANGE)" }, { -33, "Math argument out of domain of func (-EDOM)" }, { -32, "Broken pipe (-EPIPE)" }, { -31, "Too many links (-EMLINK)" }, { -30, "Read-only file system (-EROFS)" }, { -29, "Illegal seek (-ESPIPE)" }, { -28, "No space left on device (-ENOSPC)" }, { -27, "File too large (-EFBIG)" }, { -26, "Text file busy (-ETXTBSY)" }, { -25, "Not a typewriter (-ENOTTY)" }, { -24, "Too many open files (-EMFILE)" }, { -23, "File table overflow (-ENFILE)" }, { -22, "Invalid argument (-EINVAL)" }, { -21, "Is a directory (-EISDIR)" }, { -20, "Not a directory (-ENOTDIR)" }, { -19, "No such device (-ENODEV)" }, { -18, "Cross-device link (-EXDEV)" }, { -17, "File exists (-EEXIST)" }, { -16, "Device or resource busy (-EBUSY)" }, { -15, "Block device required (-ENOTBLK)" }, { -14, "Bad address (-EFAULT)" }, { -13, "Permission denied (-EACCES)" }, { -12, "Out of memory (-ENOMEM)" }, { -11, "Try again (-EAGAIN)" }, { -10, "No child processes (-ECHILD)" }, { -9, "Bad file number (-EBADF)" }, { -8, "Exec format error (-ENOEXEC)" }, { -7, "Argument list too long (-E2BIG)" }, { -6, "No such device or address (-ENXIO)" }, { -5, "I/O error (-EIO)" }, { -4, "Interrupted system call (-EINTR)" }, { -3, "No such process (-ESRCH)" }, { -2, "No such file or directory (-ENOENT)" }, { -1, "Operation not permitted (-EPERM)" }, { 0, "Success" }, { 0, NULL } }; value_string_ext linux_negative_errno_vals_ext = VALUE_STRING_EXT_INIT(linux_negative_errno_vals); /* * Editor modelines - http://www.wireshark.org/tools/modelines.html * * Local variables: * c-basic-offset: 4 * tab-width: 8 * indent-tabs-mode: nil * End: * * vi: set shiftwidth=4 tabstop=8 expandtab: * :indentSize=4:tabSize=8:noTabs=true: */