/* packet-PROTOABBREV.c * Routines for PROTONAME dissection * Copyright 201x, YOUR_NAME * * $Id$ * * Wireshark - Network traffic analyzer * By Gerald Combs * Copyright 1998 Gerald Combs * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program; if not, write to the Free Software Foundation, Inc., * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. */ #include "config.h" #if 0 /* Include only as needed */ #include #include #include #endif #include #include #include #if 0 /* IF AND ONLY IF your protocol dissector exposes code to other dissectors * (which most dissectors don't need to do) then the 'public' prototypes and * data structures can go in the header file packet-PROTOABBREV.h. If not, then * a header file is not needed at all and this #include statement can be * removed. */ #include "packet-PROTOABBREV.h" #endif /* Forward declaration that is needed below if using the * proto_reg_handoff_PROTOABBREV function as a callback for when protocol * preferences get changed. */ void proto_reg_handoff_PROTOABBREV(void); /* Initialize the protocol and registered fields */ static int proto_PROTOABBREV = -1; static int hf_PROTOABBREV_FIELDABBREV = -1; /* Global sample preference ("controls" display of numbers) */ static gboolean gPREF_HEX = FALSE; /* Global sample port preference - real port preferences should generally * default to 0 unless there is an IANA-registered (or equivalent) port for your * protocol. */ static guint gPORT_PREF = 1234; /* Initialize the subtree pointers */ static gint ett_PROTOABBREV = -1; /* A sample #define of the minimum length (in bytes) of the protocol data. * If data is received with fewer than this many bytes it is rejected by * the current dissector. */ #define PROTOABBREV_MIN_LENGTH 8 /* Code to actually dissect the packets */ static int dissect_PROTOABBREV(tvbuff_t *tvb, packet_info *pinfo, proto_tree *tree, void *data _U_) { /* Set up structures needed to add the protocol subtree and manage it */ proto_item *ti; proto_tree *PROTOABBREV_tree; /* Other misc. local variables. */ guint offset = 0; /*** HEURISTICS ***/ /* First, if at all possible, do some heuristics to check if the packet * cannot possibly belong to your protocol. This is especially important * for protocols directly on top of TCP or UDP where port collisions are * common place (e.g., even though your protocol uses a well known port, * someone else may set up, for example, a web server on that port which, * if someone analyzed that web server's traffic in Wireshark, would result * in Wireshark handing an HTTP packet to your dissector). * * For example: */ /* Check that there's enough data */ if (tvb_length(tvb) < PROTOABBREV_MIN_LENGTH) return 0; /* Fetch some values from the packet header using tvb_get_*(). If these * values are not valid/possible in your protocol then return 0 to give * some other dissector a chance to dissect it. */ if ( /* these values are not possible in PROTONAME */ ) return 0; /*** COLUMN DATA ***/ /* There are two normal columns to fill in: the 'Protocol' column which * is narrow and generally just contains the constant string 'PROTOABBREV', * and the 'Info' column which can be much wider and contain misc. summary * information (for example, the port number for TCP packets). * * If you are setting the column to a constant string, use "col_set_str()", * as it's more efficient than the other "col_set_XXX()" calls. * * If * - you may be appending to the column later OR * - you have constructed the string locally OR * - the string was returned from a call to val_to_str() * then use "col_add_str()" instead, as that takes a copy of the string. * * The function "col_add_fstr()" can be used instead of "col_add_str()"; it * takes "printf()"-like arguments. Don't use "col_add_fstr()" with a format * string of "%s" - just use "col_add_str()" or "col_set_str()", as it's * more efficient than "col_add_fstr()". * * For full details see section 1.5 of README.developer. */ /* Set the Protocol column to the constant string of PROTOABBREV */ col_set_str(pinfo->cinfo, COL_PROTOCOL, "PROTOABBREV"); #if 0 /* If you will be fetching any data from the packet before filling in * the Info column, clear that column first in case the calls to fetch * data from the packet throw an exception so that the Info column doesn't * contain data left over from the previous dissector: */ col_clear(pinfo->cinfo, COL_INFO); #endif col_set_str(pinfo->cinfo, COL_INFO, "XXX Request"); /*** PROTOCOL TREE ***/ /* Now we will create a sub-tree for our protocol and start adding fields * to display under that sub-tree. Most of the time the only functions you * will need are proto_tree_add_item() and proto_item_add_subtree(). * * NOTE: The offset and length values in the call to proto_tree_add_item() * define what data bytes to highlight in the hex display window when the * line in the protocol tree display corresponding to that item is selected. * * Supplying a length of -1 tells Wireshark to highlight all data from the * offset to the end of the packet. */ /* create display subtree for the protocol */ ti = proto_tree_add_item(tree, proto_PROTOABBREV, tvb, 0, -1, ENC_NA); PROTOABBREV_tree = proto_item_add_subtree(ti, ett_PROTOABBREV); /* Add an item to the subtree, see section 1.6 of README.developer for more * information. */ proto_tree_add_item(PROTOABBREV_tree, hf_PROTOABBREV_FIELDABBREV, tvb, offset, len, ENC_xxx); offset += len; /* Continue adding tree items to process the packet here... */ /* If this protocol has a sub-dissector call it here, see section 1.8 of * README.developer for more information. */ /* Return the amount of data this dissector was able to dissect (which may * or may not be the entire packet as we return here). */ return tvb_length(tvb); } /* Register the protocol with Wireshark. * * This format is require because a script is used to build the C function that * calls all the protocol registration. */ void proto_register_PROTOABBREV(void) { module_t *PROTOABBREV_module; /* Setup list of header fields See Section 1.6.1 of README.developer for * details. */ static hf_register_info hf[] = { { &hf_PROTOABBREV_FIELDABBREV, { "FIELDNAME", "PROTOABBREV.FIELDABBREV", FIELDTYPE, FIELDDISPLAY, FIELDCONVERT, BITMASK, "FIELDDESCR", HFILL } } }; /* Setup protocol subtree array */ static gint *ett[] = { &ett_PROTOABBREV }; /* Register the protocol name and description */ proto_PROTOABBREV = proto_register_protocol("PROTONAME", "PROTOSHORTNAME", "PROTOABBREV"); /* Required function calls to register the header fields and subtrees */ proto_register_field_array(proto_PROTOABBREV, hf, array_length(hf)); proto_register_subtree_array(ett, array_length(ett)); /* Register a preferences module (see section 2.6 of README.developer * for more details). Registration of a prefs callback is not required * if there are no preferences that affect protocol registration (an example * of a preference that would affect registration is a port preference). * If the prefs callback is not needed, use NULL instead of * proto_reg_handoff_PROTOABBREV in the following. */ PROTOABBREV_module = prefs_register_protocol(proto_PROTOABBREV, proto_reg_handoff_PROTOABBREV); /* Register a preferences module under the preferences subtree. * Only use this function instead of prefs_register_protocol (above) if you * want to group preferences of several protocols under one preferences * subtree. * * Argument subtree identifies grouping tree node name, several subnodes can * be specified using slash '/' (e.g. "OSI/X.500" - protocol preferences * will be accessible under Protocols->OSI->X.500-> * preferences node. */ PROTOABBREV_module = prefs_register_protocol_subtree(const char *subtree, proto_PROTOABBREV, proto_reg_handoff_PROTOABBREV); /* Register a simple example preference */ prefs_register_bool_preference(PROTOABBREV_module, "show_hex", "Display numbers in Hex", "Enable to display numerical values in hexadecimal.", &gPREF_HEX); /* Register an example port preference */ prefs_register_uint_preference(PROTOABBREV_module, "tcp.port", "PROTOABBREV TCP Port", " PROTOABBREV TCP port if other than the default", 10, &gPORT_PREF); } /* If this dissector uses sub-dissector registration add a registration routine. * This exact format is required because a script is used to find these * routines and create the code that calls these routines. * * If this function is registered as a prefs callback (see * prefs_register_protocol above) this function is also called by Wireshark's * preferences manager whenever "Apply" or "OK" are pressed. In that case, it * should accommodate being called more than once by use of the static * 'initialized' variable included below. * * This form of the reg_handoff function is used if if you perform registration * functions which are dependent upon prefs. See below this function for a * simpler form which can be used if there are no prefs-dependent registration * functions. */ void proto_reg_handoff_PROTOABBREV(void) { static gboolean initialized = FALSE; static dissector_handle_t PROTOABBREV_handle; static int currentPort; if (!initialized) { /* Use new_create_dissector_handle() to indicate that * dissect_PROTOABBREV() returns the number of bytes it dissected (or 0 * if it thinks the packet does not belong to PROTONAME). */ PROTOABBREV_handle = new_create_dissector_handle(dissect_PROTOABBREV, proto_PROTOABBREV); initialized = TRUE; } else { /* If you perform registration functions which are dependent upon * prefs then you should de-register everything which was associated * with the previous settings and re-register using the new prefs * settings here. In general this means you need to keep track of * the PROTOABBREV_handle and the value the preference had at the time * you registered. The PROTOABBREV_handle value and the value of the * preference can be saved using local statics in this * function (proto_reg_handoff). */ dissector_delete_uint("tcp.port", currentPort, PROTOABBREV_handle); } currentPort = gPORT_PREF; dissector_add_uint("tcp.port", currentPort, PROTOABBREV_handle); } #if 0 /* Simpler form of proto_reg_handoff_PROTOABBREV which can be used if there are * no prefs-dependent registration function calls. */ void proto_reg_handoff_PROTOABBREV(void) { dissector_handle_t PROTOABBREV_handle; /* Use new_create_dissector_handle() to indicate that dissect_PROTOABBREV() * returns the number of bytes it dissected (or 0 if it thinks the packet * does not belong to PROTONAME). */ PROTOABBREV_handle = new_create_dissector_handle(dissect_PROTOABBREV, proto_PROTOABBREV); dissector_add_uint("PARENT_SUBFIELD", ID_VALUE, PROTOABBREV_handle); } #endif /* * Editor modelines - http://www.wireshark.org/tools/modelines.html * * Local variables: * c-basic-offset: 4 * tab-width: 8 * indent-tabs-mode: nil * End: * * vi: set shiftwidth=4 tabstop=8 expandtab: * :indentSize=4:tabSize=8:noTabs=true: */