$Revision: 25920 $ $Date: 2008-08-04 22:41:43 +0200 (Mo, 04 Aug 2008) $ $Author: ulfl $ This file is a HOWTO for Wireshark developers. It describes how Wireshark heuristic protocol dissectors work and how to write them. This file is compiled to give in depth information on Wireshark. It is by no means all inclusive and complete. Please feel free to send remarks and patches to the developer mailing list. Prerequisites ------------- As this file is an addition to README.developer, it is essential to read and understand that document first. Why heuristic dissectors? ------------------------- When Wireshark "receives" a packet, it has to find the right dissector to start decoding the packet data. Often this can be done by known conventions, e.g. the Ethernet type 0x0800 means "IP on top of Ethernet" - an easy and reliable match for Wireshark. Unfortunately, these conventions are not always available, or (accidentally or knowingly) some protocols don't care about those conventions and "reuse" existing "magic numbers / tokens". For example TCP defines port 80 only for the use of HTTP traffic. But, this convention doesn't prevent anyone from using TCP port 80 for some different protocol, or on the other hand using HTTP on a port number different than 80. To solve this problem, Wireshark introduced the so called heuristic dissector mechanism to try to deal with these problems. How Wireshark uses heuristic dissectors? ---------------------------------------- While Wireshark starts, heuristic dissectors (HD) register themselves slightly different than "normal" dissectors, e.g. a HD can ask for any TCP packet, as it *may* contain interesting packet data for this dissector. In reality more than one HD will exist for e.g. TCP packet data. So if Wireshark has to decode TCP packet data, it will first try to find a dissector registered directly for the TCP port used in that packet. If it finds such a registered dissector it will just hand over the packet data to it. In case there is no such "normal" dissector, WS will hand over the packet data to the first matching HD. Now the HD will look into the data and decide if that data looks like something the dissector "is interested in". The return value signals WS if the HD processed the data (so WS can stop working on that packet) or if the heuristic didn't match (so WS tries the next HD until one matches - or the data simply can't be processed). Note that it is possible to configure WS through preference settings so that it hands off a packet to the heuristic dissectors before the "normal" dissectors are called. This allows the HD the chance to receive packets and process them differently than they otherwise would be. Of course if no HD is interested in the packet, then the packet will ultimately get handed off to the "normal" dissector as if the HD wasn't involved at all. As of this writing, the DCCP, SCTP, TCP, TIPC and UDP dissectors all provide this capability via their "Try heuristic sub-dissectors first" preference, but none of them have this option enabled by default. How do these heuristics work? ----------------------------- Difficult to give a general answer here. The usual heuristic works as follows: A HD looks into the first few packet bytes and searches for common patterns that are specific to the protocol in question. Most protocols starts with a specific header, so a specific pattern may look like (synthetic example): 1) first byte must be 0x42 2) second byte is a type field and can only contain values between 0x20 - 0x33 3) third byte is a flag field, where the lower 4 bits always contain the value 0 4) fourth and fifth bytes contain a 16 bit length field, where the value can't be larger than 10000 bytes So the heuristic dissector will check incoming packet data for all of the 4 above conditions, and only if all of the four conditions are true there is a good chance that the packet really contains the expected protocol - and the dissector continues to decode the packet data. If one condition fails, it's very certainly not the protocol in question and the dissector returns to WS immediately "this is not my protocol" - maybe some other heuristic dissector is interested! Obviously, this is *not* 100% bullet proof, but it's the best WS can offer to its users here - and improving the heuristic is always possible if it turns out that it's not good enough to distinguish between two given protocols. Heuristic Code Example ---------------------- You can find a lot of code examples in the wireshark sources, e.g.: grep -l heur_dissector_add epan/dissectors/*.c returns (currently) 68 files. For the above example criteria, the following code example might do the work (combine this with the dissector skeleton in README.developer): XXX - please note: The following code examples were not tried in reality, please report problems to the dev-list! static gboolean dissect_PROTOABBREV(tvbuff_t *tvb, packet_info *pinfo, proto_tree *tree) { ... /* 1) first byte must be 0x42 */ if ( tvb_get_guint8(tvb, 0) != 0x42 ) return (FALSE); /* 2) second byte is a type field and only can contain values between 0x20-0x33 */ if ( tvb_get_guint8(tvb, 1) < 0x20 || tvb_get_guint8(tvb, 1) > 0x33 ) return (FALSE); /* 3) third byte is a flag field, where the lower 4 bits always contain the value 0 */ if ( tvb_get_guint8(tvb, 2) & 0x0f ) return (FALSE); /* 4) fourth and fifth bytes contains a 16 bit length field, where the value can't be longer than 10000 bytes */ /* Assumes network byte order */ if ( tvb_get_ntohs(tvb, 3) > 10000 ) return (FALSE); /* Assume it's your packet and do dissection */ ... return (TRUE); } void proto_reg_handoff_PROTOABBREV(void) { static int PROTOABBREV_inited = FALSE; if ( !PROTOABBREV_inited ) { /* register as heuristic dissector for both TCP and UDP */ heur_dissector_add("tcp", dissect_PROTOABBREV, proto_PROTOABBREV); heur_dissector_add("udp", dissect_PROTOABBREV, proto_PROTOABBREV); } } Please note, that registering a heuristic dissector is only possible for a small variety of protocols. In most cases a heuristic is not needed, and adding the support would only add unused code to the dissector. TCP and UDP are prominent examples that support HDs, as there seems to be a tendency to reuse known port numbers for new protocols. But TCP and UDP are not the only dissectors that provide support for HDs. You can find more examples by searching the Wireshark sources as follows: grep -l register_heur_dissector_list epan/dissectors/packet-*.c returns (currently) 25 files. It's possible to write a dissector to be a dual heuristic/normal dissector. In that the case, dissect_PROTOABBREV should return an int with the number of bytes dissected by your protocol rather than simply returning TRUE. If heuristics fail, still just return 0. static int dissect_PROTOABBREV(tvbuff_t *tvb, packet_info *pinfo, proto_tree *tree) { ... /* 1) first byte must be 0x42 */ if ( tvb_get_guint8(tvb, 0) != 0x42 ) return 0; /* 2) second byte is a type field and only can contain values between 0x20-0x33 */ if ( tvb_get_guint8(tvb, 1) < 0x20 || tvb_get_guint8(tvb, 1) > 0x33 ) return 0; /* 3) third byte is a flag field, where the lower 4 bits always contain the value 0 */ if ( tvb_get_guint8(tvb, 2) & 0x0f ) return 0; /* 4) fourth and fifth bytes contains a 16 bit length field, where the value can't be longer than 10000 bytes */ /* Assumes network byte order */ if ( tvb_get_ntohs(tvb, 3) > 10000 ) return 0; /* Assume it's your packet and do dissection */ ... return number_of_bytes_dissected; } void proto_reg_handoff_PROTOABBREV(void) { static int PROTOABBREV_inited = FALSE; dissector_handle_t PROTOABBREV_handle; if ( !PROTOABBREV_inited ) { /* register as heuristic dissector for both TCP and UDP */ heur_dissector_add("tcp", dissect_PROTOABBREV, proto_PROTOABBREV); heur_dissector_add("udp", dissect_PROTOABBREV, proto_PROTOABBREV); /* register as normal dissector for IP as well */ PROTOABBREV_handle = new_create_dissector_handle(dissect_PROTOABBREV, proto_PROTOABBREV); dissector_add_uint("ip.proto", IP_PROTO_PROTOABBREV, PROTOABBREV_handle); PROTOABBREV_inited = TRUE; } }