This file is a HOWTO for Wireshark developers. It describes how Wireshark heuristic protocol dissectors work and how to write them. This file is compiled to give in depth information on Wireshark. It is by no means all inclusive and complete. Please feel free to send remarks and patches to the developer mailing list. Prerequisites ------------- As this file is an addition to README.dissector, it is essential to read and understand that document first. Why heuristic dissectors? ------------------------- When Wireshark "receives" a packet, it has to find the right dissector to start decoding the packet data. Often this can be done by known conventions, e.g. the Ethernet type 0x0800 means "IP on top of Ethernet" - an easy and reliable match for Wireshark. Unfortunately, these conventions are not always available, or (accidentally or knowingly) some protocols don't care about those conventions and "reuse" existing "magic numbers / tokens". For example TCP defines port 80 only for the use of HTTP traffic. But, this convention doesn't prevent anyone from using TCP port 80 for some different protocol, or on the other hand using HTTP on a port number different than 80. To solve this problem, Wireshark introduced the so called heuristic dissector mechanism to try to deal with these problems. How Wireshark uses heuristic dissectors? ---------------------------------------- While Wireshark starts, heuristic dissectors (HD) register themselves slightly different than "normal" dissectors, e.g. a HD can ask for any TCP packet, as it *may* contain interesting packet data for this dissector. In reality more than one HD will exist for e.g. TCP packet data. So if Wireshark has to decode TCP packet data, it will first try to find a dissector registered directly for the TCP port used in that packet. If it finds such a registered dissector it will just hand over the packet data to it. In case there is no such "normal" dissector, WS will hand over the packet data to the first matching HD. Now the HD will look into the data and decide if that data looks like something the dissector "is interested in". The return value signals WS if the HD processed the data (so WS can stop working on that packet) or if the heuristic didn't match (so WS tries the next HD until one matches - or the data simply can't be processed). Note that it is possible to configure WS through preference settings so that it hands off a packet to the heuristic dissectors before the "normal" dissectors are called. This allows the HD the chance to receive packets and process them differently than they otherwise would be. Of course if no HD is interested in the packet, then the packet will ultimately get handed off to the "normal" dissector as if the HD wasn't involved at all. As of this writing, the DCCP, SCTP, TCP, TIPC and UDP dissectors all provide this capability via their "Try heuristic sub-dissectors first" preference, but none of them have this option enabled by default. Once a packet for a particular "connection" has been identified as belonging to a particular protocol, Wireshark should then be set up to always directly call the dissector for that protocol. This removes the overhead of having to identify each packet of the connection heuristically. How do these heuristics work? ----------------------------- It's difficult to give a general answer here. The usual heuristic works as follows: A HD looks into the first few packet bytes and searches for common patterns that are specific to the protocol in question. Most protocols starts with a specific header, so a specific pattern may look like (synthetic example): 1) first byte must be 0x42 2) second byte is a type field and can only contain values between 0x20 - 0x33 3) third byte is a flag field, where the lower 4 bits always contain the value 0 4) fourth and fifth bytes contain a 16 bit length field, where the value can't be larger than 10000 bytes So the heuristic dissector will check incoming packet data for all of the 4 above conditions, and only if all of the four conditions are true there is a good chance that the packet really contains the expected protocol - and the dissector continues to decode the packet data. If one condition fails, it's very certainly not the protocol in question and the dissector returns to WS immediately "this is not my protocol" - maybe some other heuristic dissector is interested! Obviously, this is *not* 100% bullet proof, but it's the best WS can offer to its users here - and improving the heuristic is always possible if it turns out that it's not good enough to distinguish between two given protocols. Note: The heuristic code in a dissector *must not* cause an exception (before returning FALSE) as this will prevent following heuristic dissector handoffs. In practice, this normally means that a test should be done to verify that the required data is available in the tvb before fetching from the tvb. (See the example below). Heuristic Code Example ---------------------- You can find a lot of code examples in the Wireshark sources, e.g.: grep -l heur_dissector_add epan/dissectors/*.c returns 177 files (October 2015). For the above example criteria, the following code example might do the work (combine this with the dissector skeleton in README.developer): XXX - please note: The following code examples were not tried in reality, please report problems to the dev-list! -------------------------------------------------------------------------------------------- static dissector_handle_t PROTOABBREV_tcp_handle; static dissector_handle_t PROTOABBREV_pdu_handle; /* Heuristics test */ static gboolean test_PROTOABBREV(packet_info *pinfo _U_, tvbuff_t *tvb, int offset _U_, void *data _U_) { /* 0) Verify needed bytes available in tvb so tvb_get...() doesn't cause exception. if (tvb_captured_length(tvb) < 5) return FALSE; /* 1) first byte must be 0x42 */ if ( tvb_get_guint8(tvb, 0) != 0x42 ) return FALSE; /* 2) second byte is a type field and only can contain values between 0x20-0x33 */ if ( tvb_get_guint8(tvb, 1) < 0x20 || tvb_get_guint8(tvb, 1) > 0x33 ) return FALSE; /* 3) third byte is a flag field, where the lower 4 bits always contain the value 0 */ if ( tvb_get_guint8(tvb, 2) & 0x0f ) return FALSE; /* 4) fourth and fifth bytes contains a 16 bit length field, where the value can't be longer than 10000 bytes */ /* Assumes network byte order */ if ( tvb_get_ntohs(tvb, 3) > 10000 ) return FALSE; /* Assume it's your packet ... */ return TRUE; } /* Dissect the complete PROTOABBREV pdu */ static int dissect_PROTOABBREV_pdu(tvbuff_t *tvb, packet_info *pinfo, proto_tree *tree, void *data _U_) { /* Dissection ... */ return tvb_reported_length(tvb); } /* For tcp_dissect_pdus() */ static guint get_PROTOABBREV_len(packet_info *pinfo _U_, tvbuff_t *tvb, int offset, void *data _U_) { return (guint) tvb_get_ntohs(tvb, offset+3); } static int dissect_PROTOABBREV_tcp(tvbuff_t *tvb, packet_info *pinfo, proto_tree *tree, void *data) { tcp_dissect_pdus(tvb, pinfo, tree, TRUE, 5, get_PROTOABBREV_len, dissect_PROTOABBREV_pdu, data); return tvb_reported_length(tvb); } static gboolean dissect_PROTOABBREV_heur_tcp(tvbuff_t *tvb, packet_info *pinfo, proto_tree *tree, void *data) { if (!test_PROTOABBREV(pinfo, tvb, 0, data)) return FALSE; /* specify that dissect_PROTOABBREV is to be called directly from now on for * packets for this "connection" ... but only do this if your heuristic sits directly * on top of (was called by) a dissector which established a conversation for the * protocol "port type". In other words: only directly over TCP, UDP, DCCP, ... * otherwise you'll be overriding the dissector that called your heuristic dissector. */ conversation = find_or_create_conversation(pinfo); conversation_set_dissector(conversation, PROTOABBREV_tcp_handle); /* and do the dissection */ dissect_PROTOABBREV_tcp(tvb, pinfo, tree, data); return (TRUE); } static int dissect_PROTOABBREV_udp(tvbuff_t *tvb, packet_info *pinfo, proto_tree *tree, void *data) { udp_dissect_pdus(tvb, pinfo, tree, TRUE, 5, NULL, get_PROTOABBREV_len, dissect_PROTOABBREV_pdu, data); return tvb_reported_length(tvb); } static gboolean dissect_PROTOABBREV_heur_udp(tvbuff_t *tvb, packet_info *pinfo, proto_tree *tree, void *data) { ... /* and do the dissection */ return (udp_dissect_pdus(tvb, pinfo, tree, TRUE, 5, test_PROTOABBREV, get_PROTOABBREV_len, dissect_PROTOABBREV_pdu, data) != 0); } void proto_reg_handoff_PROTOABBREV(void) { PROTOABBREV_tcp_handle = create_dissector_handle(dissect_PROTOABBREV_tcp, proto_PROTOABBREV); PROTOABBREV_pdu_handle = create_dissector_handle(dissect_PROTOABBREV_pdu, proto_PROTOABBREV); /* register as heuristic dissector for both TCP and UDP */ heur_dissector_add("tcp", dissect_PROTOABBREV_heur_tcp, "PROTOABBREV over TCP", "PROTOABBREV_tcp", proto_PROTOABBREV, HEURISTIC_ENABLE); heur_dissector_add("udp", dissect_PROTOABBREV_heur_udp, "PROTOABBREV over UDP", "PROTOABBREV_udp", proto_PROTOABBREV, HEURISTIC_ENABLE); #ifdef OPTIONAL /* It's possible to write a dissector to be a dual heuristic/normal dissector */ /* by also registering the dissector "normally". */ dissector_add_uint("ip.proto", IP_PROTO_PROTOABBREV, PROTOABBREV_pdu_handle); #endif } Please note, that registering a heuristic dissector is only possible for a small variety of protocols. In most cases a heuristic is not needed, and adding the support would only add unused code to the dissector. TCP and UDP are prominent examples that support HDs, as there seems to be a tendency to re-use known port numbers for new protocols. But TCP and UDP are not the only dissectors that provide support for HDs. You can find more examples by searching the Wireshark sources as follows: grep -l register_heur_dissector_list epan/dissectors/packet-*.c returns 45 files (November 2014).