MEDIA-GATEWAY-CONTROL {itu-t(0) recommendation(0) h(8) h248(248) modules(0)
media-gateway-control(0) version3(3)}
--
-- Module MEDIA-GATEWAY-CONTROL (H.248.1:09/2005)
-- See also ITU-T H.248.1 v3 (2005) Amend. 1 (05/2008)
--
-- $Id$
--DEFINITIONS AUTOMATIC TAGS ::=
--BEGIN
-- Has been modified to pass through the ASN2ETH compiler
-- (we dont support automatic tags yet so the tags had to be added by
--  hand)
DEFINITIONS IMPLICIT TAGS ::=
BEGIN
	MegacoMessage ::= SEQUENCE
	{
		authHeader		[0] AuthenticationHeader OPTIONAL,
		mess			[1] Message
	}

	AuthenticationHeader ::= SEQUENCE
	{
		secParmIndex	[0] SecurityParmIndex,
		seqNum			[1] SequenceNum,
		ad				[2] AuthData
	}

	SecurityParmIndex ::= OCTET STRING(SIZE(4))

	SequenceNum ::= OCTET STRING(SIZE(4))

	AuthData ::= OCTET STRING (SIZE (12..32))

	Message ::= SEQUENCE
	{
		version			[0] INTEGER(0..99),
		-- The version of the protocol defined here is equal to 3.
		mId				[1] MId, -- Name/address of message originator
		messageBody		[2] CHOICE
		{
			messageError	[0] ErrorDescriptor,
			transactions	[1] SEQUENCE OF Transaction
		},
		...
	}

	MId ::= CHOICE
	{
		ip4Address		[0]	IP4Address,
		ip6Address		[1] IP6Address,
		domainName		[2] DomainName,
		deviceName		[3] PathName,
		mtpAddress		[4] MtpAddress,
		-- Addressing structure of mtpAddress:
		-- 25 - 15 0
		-- | PC | NI |
		-- 24 - 14 bits 2 bits
		-- NOTE - 14 bits are defined for international use.
		-- Two national options exist where the point code is 16 or 24 bits.
		-- To octet align the mtpAddress, the MSBs shall be encoded as 0s.
		...
	}
-- Wireshark specific	
	MtpAddress ::= OCTET STRING(SIZE(2..4))
	
	DomainName ::= SEQUENCE
	{
		name			[0] IA5String,
		-- The name starts with an alphanumeric digit followed by a sequence
		-- of alphanumeric digits, hyphens and dots. No two dots shall occur
		-- consecutively.

		portNumber			[1] INTEGER(0..65535) OPTIONAL
	}

	IP4Address ::= SEQUENCE
	{
		address			[0] OCTET STRING (SIZE(4)),
		portNumber		[1] INTEGER(0..65535) OPTIONAL
	}

	IP6Address ::= SEQUENCE
	{
		address			[0] OCTET STRING (SIZE(16)),
		portNumber		[1] INTEGER(0..65535) OPTIONAL
	}

	PathName ::= IA5String(SIZE (1..64))
	-- See A.3

	Transaction ::= CHOICE
	{
		transactionRequest		[0] TransactionRequest,
		transactionPending		[1] TransactionPending,
		transactionReply		[2] TransactionReply,
		transactionResponseAck	[3] TransactionResponseAck,
		-- use of response acks is dependent on underlying transport
		...,
		segmentReply			[4] SegmentReply
	}

	TransactionId ::= INTEGER(0..4294967295) -- 32-bit unsigned integer

	TransactionRequest ::= SEQUENCE
	{
		transactionId			[0] TransactionId,
		actions					[1] SEQUENCE OF ActionRequest,
		...
		}

	TransactionPending ::= SEQUENCE
	{
		transactionId			[0] TransactionId,
		...
	}

	TransactionReply ::= SEQUENCE
	{
		transactionId			[0] TransactionId,
		immAckRequired			[1] NULL OPTIONAL,
		transactionResult		[2] CHOICE
		{
			transactionError		[0]ErrorDescriptor,
			actionReplies			[1] SEQUENCE OF ActionReply
		},
		...,
		segmentNumber			[3] SegmentNumber OPTIONAL,
		segmentationComplete	[4] NULL OPTIONAL
	}

	SegmentReply ::= SEQUENCE
	{
		transactionId			[0] TransactionId,
		segmentNumber			[1] SegmentNumber,
		segmentationComplete	[2] NULL OPTIONAL,
		...
	}

	SegmentNumber ::= INTEGER(0..65535)
	
	TransactionResponseAck ::= SEQUENCE OF TransactionAck

	TransactionAck ::= SEQUENCE
	{
		firstAck		[0] TransactionId,
		lastAck			[1] TransactionId OPTIONAL
	}

	ErrorDescriptor ::= SEQUENCE
	{
		errorCode		[0] ErrorCode,
		errorText		[1] ErrorText OPTIONAL
	}

	ErrorCode ::= INTEGER(0..65535)
	-- See clause 14 for IANA considerations with respect to error codes

	ErrorText ::= IA5String
	
	ContextID ::= INTEGER(0..4294967295)
	-- Context NULL Value: 0
	-- Context CHOOSE Value: 4294967294 (0xFFFFFFFE)
	-- Context ALL Value: 4294967295 (0xFFFFFFFF)

	ActionRequest ::= SEQUENCE
	{
		contextId				[0] ContextID,
		contextRequest			[1] ContextRequest OPTIONAL,
		contextAttrAuditReq		[2] ContextAttrAuditRequest OPTIONAL,
		commandRequests			[3] SEQUENCE OF CommandRequest
	}

	ActionReply ::= SEQUENCE
	{
		contextId				[0] ContextID,
		errorDescriptor			[1] ErrorDescriptor OPTIONAL,
		contextReply			[2] ContextRequest OPTIONAL,
		commandReply			[3] SEQUENCE OF CommandReply
	}

	-- WireShark Specific
	ContextIDinList ::= INTEGER(0..4294967295)

	ContextRequest ::= SEQUENCE
	{
		priority				[0] INTEGER(0..15) OPTIONAL,
		emergency				[1] BOOLEAN OPTIONAL,
		topologyReq				[2] SEQUENCE OF TopologyRequest OPTIONAL,
		...,
		iepscallind				[3] BOOLEAN OPTIONAL,
		contextProp				[4] SEQUENCE OF PropertyParm OPTIONAL,
		
		-- WireShark Specific
		-- contextList				[5] SEQUENCE OF ContextID OPTIONAL
		contextList				[5] SEQUENCE OF ContextIDinList OPTIONAL
		-- Currently the way that WS tracing code's persistent data is
		-- organized disallows to relate a request to multiple contexts
	}
	
-- When returning a contextList, the contextId in the ActionReply construct will
-- return the contextId from the associated ActionRequest.

	ContextAttrAuditRequest ::= SEQUENCE
	{
		topology				[0] NULL OPTIONAL,
		emergency				[1] NULL OPTIONAL,
		priority				[2] NULL OPTIONAL,
		...,
		iepscallind				[3] NULL OPTIONAL,
		contextPropAud			[4] SEQUENCE OF IndAudPropertyParm OPTIONAL,
		selectpriority			[5] INTEGER(0..15) OPTIONAL,
		-- to select given priority
		selectemergency			[6] BOOLEAN OPTIONAL,
		-- to select if emergency set/not set (T/F)
		selectiepscallind		[7] BOOLEAN OPTIONAL,
		-- to select if IEPS set/not set (T/F)
		selectLogic				[8] SelectLogic OPTIONAL -- default is AND
	}

	SelectLogic ::= CHOICE
	{
		andAUDITSelect			[0] NULL, -- all filter conditions satisfied
		orAUDITSelect			[1] NULL, -- at least one filter condition satisfied
		...
	}

	CommandRequest ::= SEQUENCE
	{
		command			[0] Command,
		optional		[1]	NULL OPTIONAL,
		wildcardReturn	[2] NULL OPTIONAL,
		...
	}

	Command ::= CHOICE
	{
		addReq				[0] AmmRequest,
		moveReq				[1] AmmRequest,
		modReq				[2]	AmmRequest,
		-- Add, Move, Modify requests have the same parameters
		subtractReq			[3] SubtractRequest,
		auditCapRequest		[4] AuditRequest,
		auditValueRequest	[5] AuditRequest,
		notifyReq			[6]	NotifyRequest,
		serviceChangeReq	[7] ServiceChangeRequest,
		...
	}

	CommandReply ::= CHOICE
	{
		addReply			[0] AmmsReply,
		moveReply			[1] AmmsReply,
		modReply			[2] AmmsReply,
		subtractReply		[3] AmmsReply,
		-- Add, Move, Modify, Subtract replies have the same parameters
		auditCapReply		[4] AuditReply,
		auditValueReply		[5] AuditReply,
		notifyReply			[6] NotifyReply,
		serviceChangeReply  [7] ServiceChangeReply,
		...
	}
	
	TopologyRequest ::= SEQUENCE
	{
		terminationFrom				[0] TerminationID,
		terminationTo				[1] TerminationID,
		topologyDirection			[2] ENUMERATED
		{
			bothway(0),
			isolate(1),
			oneway(2)
		},
		...,
		streamID					[3]StreamID OPTIONAL,
		topologyDirectionExtension	[4] ENUMERATED
		{
			onewayexternal(0),
			onewayboth(1),
			...
		} OPTIONAL
	}

	AmmRequest ::= SEQUENCE
	{
		terminationID				[0] TerminationIDList,
		descriptors					[1] SEQUENCE OF AmmDescriptor,
		-- At most one descriptor of each type (see AmmDescriptor)
		-- allowed in the sequence.
		...
	}

	AmmDescriptor ::= CHOICE
	{
		mediaDescriptor				[0] MediaDescriptor,
		modemDescriptor				[1] ModemDescriptor,
		muxDescriptor				[2] MuxDescriptor,
		eventsDescriptor			[3] EventsDescriptor,
		eventBufferDescriptor		[4] EventBufferDescriptor,
		signalsDescriptor			[5] SignalsDescriptor,
		digitMapDescriptor			[6] DigitMapDescriptor,
		auditDescriptor				[7] AuditDescriptor,
		...,
		statisticsDescriptor		[8] StatisticsDescriptor
	}

	AmmsReply ::= SEQUENCE
	{
		terminationID				[0] TerminationIDList,
		terminationAudit			[1]TerminationAudit OPTIONAL,
		...
	}

	SubtractRequest ::= SEQUENCE
	{
		terminationID				[0] TerminationIDList,
		auditDescriptor				[1] AuditDescriptor OPTIONAL,
		...
	}

	AuditRequest ::= SEQUENCE
	{
		terminationID				[0] TerminationID,
		auditDescriptor				[1] AuditDescriptor,
		...,
		terminationIDList			[3] TerminationIDList OPTIONAL
	}
	-- terminationID shall contain the first termination in the
	-- list when using the terminationIDList construct in AuditRequest

	AuditReply ::= CHOICE
	{
		contextAuditResult			[0] TerminationIDList,
		error						[1] ErrorDescriptor,
		auditResult					[2] AuditResult,
		...,
		auditResultTermList			[3] TermListAuditResult
	}

	AuditResult ::= SEQUENCE
	{
		terminationID				[0] TerminationID,
		terminationAuditResult		[1] TerminationAudit
	}

	TermListAuditResult ::= SEQUENCE
	{
		terminationIDList			[0] TerminationIDList,
		terminationAuditResult		[1] TerminationAudit,
		...
	}

	TerminationAudit ::= SEQUENCE OF AuditReturnParameter

	AuditReturnParameter ::= CHOICE
	{
		errorDescriptor				[0] ErrorDescriptor,
		mediaDescriptor				[1] MediaDescriptor,
		modemDescriptor				[2] ModemDescriptor,
		muxDescriptor				[3] MuxDescriptor,
		eventsDescriptor			[4] EventsDescriptor,
		eventBufferDescriptor		[5] EventBufferDescriptor,
		signalsDescriptor			[6] SignalsDescriptor,
		digitMapDescriptor			[7] DigitMapDescriptor,
		observedEventsDescriptor	[8] ObservedEventsDescriptor,
		statisticsDescriptor		[9] StatisticsDescriptor,
		packagesDescriptor			[10] PackagesDescriptor,
		emptyDescriptors			[11] AuditDescriptor,
		...
	}

	AuditDescriptor ::= SEQUENCE
	{
		auditToken					[0] BIT STRING
		{
			muxToken(0),
			modemToken(1),
			mediaToken(2),
			eventsToken(3),
			signalsToken(4),
			digitMapToken(5),
			statsToken(6),
			observedEventsToken(7),
			packagesToken(8),
			eventBufferToken(9)
		} OPTIONAL,
		...,
		auditPropertyToken			[1] SEQUENCE OF IndAuditParameter OPTIONAL
	}

	IndAuditParameter ::= CHOICE
	{
		indaudmediaDescriptor		[0] IndAudMediaDescriptor,
		indaudeventsDescriptor		[1] IndAudEventsDescriptor,
		indaudeventBufferDescriptor [2] IndAudEventBufferDescriptor,
		indaudsignalsDescriptor		[3] IndAudSignalsDescriptor,
		indauddigitMapDescriptor	[4] IndAudDigitMapDescriptor,
		indaudstatisticsDescriptor  [5] IndAudStatisticsDescriptor,
		indaudpackagesDescriptor	[6] IndAudPackagesDescriptor,
		...
	}

	IndAudMediaDescriptor ::= SEQUENCE
	{
		termStateDescr				[0] IndAudTerminationStateDescriptor OPTIONAL,
		streams						[1] CHOICE
		{
			oneStream		[0] IndAudStreamParms,
			multiStream		[1] SEQUENCE OF IndAudStreamDescriptor
		} OPTIONAL,
		...
	}

	IndAudStreamDescriptor ::= SEQUENCE
	{
		streamID		[0] StreamID,
		streamParms		[1] IndAudStreamParms
	}

	IndAudStreamParms ::= SEQUENCE
	{
		localControlDescriptor		[0] IndAudLocalControlDescriptor OPTIONAL,
		localDescriptor				[1] IndAudLocalRemoteDescriptor OPTIONAL,
		remoteDescriptor			[2] IndAudLocalRemoteDescriptor OPTIONAL,
		...,
		statisticsDescriptor		[3] IndAudStatisticsDescriptor OPTIONAL
	}

	IndAudLocalControlDescriptor ::= SEQUENCE
	{
		streamMode					[0] NULL OPTIONAL,
		reserveValue				[1] NULL OPTIONAL,
		reserveGroup				[2] NULL OPTIONAL,
		propertyParms				[3] SEQUENCE OF IndAudPropertyParm OPTIONAL,
		...,
		streamModeSel				[4] StreamMode OPTIONAL
	}
	-- must not have both streamMode and streamModeSel
	-- if both are present only streamModeSel shall be honoured

	IndAudPropertyParm ::= SEQUENCE
	{
		name						[0] PkgdName,
		...,
		propertyParms				[1] PropertyParm OPTIONAL
	}
	-- to select based on property values
	-- AND/OR selection logic is specified at context level

	IndAudLocalRemoteDescriptor ::= SEQUENCE
	{
		propGroupID					[0] INTEGER(0..65535) OPTIONAL,
		propGrps					[1] IndAudPropertyGroup,
		...
	}

	IndAudPropertyGroup ::= SEQUENCE OF IndAudPropertyParm

	IndAudTerminationStateDescriptor ::= SEQUENCE
	{
		propertyParms				[0] SEQUENCE OF IndAudPropertyParm,
		eventBufferControl			[1] NULL OPTIONAL,
		serviceState				[2] NULL OPTIONAL,
		...,
		serviceStateSel				[3] ServiceState OPTIONAL
	}
	-- must not have both serviceState and serviceStateSel
	-- if both are present only serviceStateSel shall be honoured

	IndAudEventsDescriptor ::= SEQUENCE
	{
		requestID					[0] RequestID OPTIONAL,
		pkgdName					[1] PkgdName,
		streamID					[2] StreamID OPTIONAL,
		...
	}

	IndAudEventBufferDescriptor ::= SEQUENCE
	{
		eventName					[0] PkgdName,
		streamID					[1] StreamID OPTIONAL,
		...
	}

	IndAudSignalsDescriptor ::=CHOICE
	{
		signal						[0] IndAudSignal,
		seqSigList					[1] IndAudSeqSigList,
		...
	}

	IndAudSeqSigList ::= SEQUENCE
	{
		id							[0] INTEGER(0..65535),
		signalList					[1] IndAudSignal OPTIONAL
	}

	IndAudSignal ::= SEQUENCE
	{
		signalName					[0] PkgdName,
		streamID					[1] StreamID OPTIONAL,
		...,
		signalRequestID				[2] RequestID OPTIONAL
	}

	IndAudDigitMapDescriptor ::= SEQUENCE
	{
		digitMapName				[0] DigitMapName OPTIONAL
	}

	IndAudStatisticsDescriptor ::= SEQUENCE
	{
		statName					[0] PkgdName
	}

	IndAudPackagesDescriptor ::= SEQUENCE
	{
		packageName					[0] Name,
		packageVersion				[1] INTEGER(0..99),
		...
	}

	NotifyRequest ::= SEQUENCE
	{
		terminationID				[0] TerminationIDList,
		observedEventsDescriptor	[1] ObservedEventsDescriptor,
		errorDescriptor				[2] ErrorDescriptor OPTIONAL,
		...
	}

	NotifyReply ::= SEQUENCE
	{
		terminationID				[0] TerminationIDList,
		errorDescriptor				[1] ErrorDescriptor OPTIONAL,
		...
	}

	ObservedEventsDescriptor ::= SEQUENCE
	{
		requestId					[0] RequestID,
		observedEventLst			[1] SEQUENCE OF ObservedEvent
	}

	ObservedEvent ::= SEQUENCE
	{
		eventName					[0] EventName,
		streamID					[1] StreamID OPTIONAL,
		eventParList				[2] SEQUENCE OF EventParameter,
		timeNotation				[3] TimeNotation OPTIONAL,
		...
	}

--	EventName ::= PkgdName
	EventName ::= OCTET STRING 

	EventParameter ::= SEQUENCE
	{
-- Wireshark specific
--		eventParameterName			[0] Name,
--		value						[1] Value,
		eventParameterName			[0] EventParameterName, 
		eventParamValue				[1] EventParamValues, 
-- end
		-- For use of extraInfos see the comment related to PropertyParm
		extraInfo [2] CHOICE
		{
			relation		[0] Relation,
			range			[1] BOOLEAN,
			sublist			[2] BOOLEAN
		} OPTIONAL,
		...
	}
-- Wireshark specific
	EventParameterName ::= Name
	
	EventParamValues ::= SEQUENCE OF EventParamValue
	  
	EventParamValue ::= OCTET STRING
-- end
	ServiceChangeRequest ::= SEQUENCE
	{
		terminationID				[0] TerminationIDList,
		serviceChangeParms			[1] ServiceChangeParm,
		...
	}

	ServiceChangeReply ::= SEQUENCE
	{
		terminationID				[0] TerminationIDList,
		serviceChangeResult			[1] ServiceChangeResult,
		...
	}
	-- For ServiceChangeResult, no parameters are mandatory. Hence the
	-- distinction between ServiceChangeParm and ServiceChangeResParm.

	ServiceChangeResult ::= CHOICE
	{
		errorDescriptor				[0] ErrorDescriptor,
		serviceChangeResParms		[1] ServiceChangeResParm
	}

	WildcardField ::= OCTET STRING(SIZE(1))

	TerminationID ::= SEQUENCE
	{
		wildcard					[0] SEQUENCE OF WildcardField,
		id							[1] OCTET STRING(SIZE(1..8)),
		...
	}
	-- See A.1 for explanation of wildcarding mechanism.
	-- TerminationID 0xFFFFFFFFFFFFFFFF indicates the Root Termination.

	TerminationIDList ::= SEQUENCE OF TerminationID

	MediaDescriptor ::= SEQUENCE
	{
		termStateDescr				[0] TerminationStateDescriptor OPTIONAL,
		streams						[1] CHOICE
		{
			oneStream		[0] StreamParms,
			multiStream		[1] SEQUENCE OF StreamDescriptor
		} OPTIONAL,
		...
	}

	StreamDescriptor ::= SEQUENCE
	{
		streamID					[0] StreamID,
		streamParms					[1] StreamParms
	}

	StreamParms ::= SEQUENCE
	{
		localControlDescriptor		[0] LocalControlDescriptor OPTIONAL,
		localDescriptor				[1] LocalRemoteDescriptor OPTIONAL,
		remoteDescriptor			[2] LocalRemoteDescriptor OPTIONAL,
		...,
		statisticsDescriptor		[3] StatisticsDescriptor OPTIONAL
	}

	LocalControlDescriptor ::= SEQUENCE
	{
	streamMode						[0] StreamMode OPTIONAL,
	reserveValue					[1] BOOLEAN OPTIONAL,
	reserveGroup					[2] BOOLEAN OPTIONAL,
	propertyParms					[3] SEQUENCE OF PropertyParm,
	...
	}

	StreamMode ::= ENUMERATED
	{
		sendOnly(0),
		recvOnly(1),
		sendRecv(2),
		inactive(3),
		loopBack(4),
		...
	}
-- In PropertyParm, value is a SEQUENCE OF octet string. When sent
-- by an MGC the interpretation is as follows:
-- empty sequence means CHOOSE
-- one element sequence specifies value
-- If the sublist field is not selected, a longer sequence means
-- "choose one of the values" (i.e., value1 OR value2 OR ...)
-- If the sublist field is selected,
-- a sequence with more than one element encodes the value of a
-- list-valued property (i.e., value1 AND value2 AND ...).
-- The relation field may only be selected if the value sequence
-- has length 1. It indicates that the MG has to choose a value
-- for the property. E.g., x > 3 (using the greaterThan
-- value for relation) instructs the MG to choose any value larger
-- than 3 for property x.
-- The range field may only be selected if the value sequence
-- has length 2. It indicates that the MG has to choose a value
-- in the range between the first octet in the value sequence and
-- the trailing octet in the value sequence, including the
-- boundary values.
-- When sent by the MG, only responses to an AuditCapability request
-- may contain multiple values, a range, or a relation field.
	PropertyParm ::= SEQUENCE
	{
--		name				[0] PkgdName,
		propertyName		[0] PkgdName,
--		value				[1] SEQUENCE OF OCTET STRING,
		value				[1] SEQUENCE OF PropertyID,
		extraInfo			[2] CHOICE
		{
			relation	[0] Relation,
			range		[1] BOOLEAN,
			sublist		[2] BOOLEAN
		} OPTIONAL,
		...
	}

	Name ::= OCTET STRING(SIZE(2))
	
	PkgdName ::= OCTET STRING(SIZE(4))
	-- represents Package Name (2 octets) plus property, event,
	-- signal names or StatisticsID. (2 octets)
	-- To wildcard a package use 0xFFFF for first two octets, CHOOSE
	-- is not allowed. To reference native property tag specified in
	-- Annex C, use 0x0000 as first two octets.
	-- To wildcard a PropertyID, EventID, SignalID, or StatisticsID, use
	-- 0xFFFF for last two octets, CHOOSE is not allowed.
	-- Wildcarding of Package Name is permitted only if PropertyID,
	-- EventID, SignalID, or StatisticsID are also wildcarded.
-- Wireshark specific
	PropertyID ::= OCTET STRING

	Relation ::= ENUMERATED
	{
		greaterThan(0),
		smallerThan(1),
		unequalTo(2),
		...
	}

	LocalRemoteDescriptor ::= SEQUENCE
	{
		propGrps				[0] SEQUENCE OF PropertyGroup,
		...
	}

	PropertyGroup ::= SEQUENCE OF PropertyParm

	TerminationStateDescriptor ::= SEQUENCE
	{
		propertyParms			[0] SEQUENCE OF PropertyParm,
		eventBufferControl		[1] EventBufferControl OPTIONAL,
		serviceState			[2] ServiceState OPTIONAL,
		...
	}

	EventBufferControl ::= ENUMERATED
	{
		off(0),
		lockStep(1),
		...
	}

	ServiceState ::= ENUMERATED
	{
		test(0),
		outOfSvc(1),
		inSvc(2),
		...
	}

	MuxDescriptor ::= SEQUENCE
	{
		muxType					[0] MuxType,
		termList				[1] SEQUENCE OF TerminationID,
		nonStandardData			[2] NonStandardData OPTIONAL,
		...
	}

	MuxType ::= ENUMERATED
	{
		h221(0),
		h223(1),
		h226(2),
		v76(3),
		...,
		nx64k(4)
	}

	StreamID ::= INTEGER(0..65535) -- 16-bit unsigned integer

	EventsDescriptor ::= SEQUENCE
	{
		requestID				[0] RequestID OPTIONAL,
		-- RequestID must be present if eventList
		-- is non empty
		eventList				[1] SEQUENCE OF RequestedEvent,
		...
	}

	RequestedEvent ::= SEQUENCE
	{
--		pkgdName				[0] PkgdName,
		eventName				[0] EventName,
		streamID				[1] StreamID OPTIONAL,
		eventAction				[2] RequestedActions OPTIONAL,
		evParList				[3] SEQUENCE OF EventParameter,
		...
	}

	RegulatedEmbeddedDescriptor ::= SEQUENCE
	{
		secondEvent				[0] SecondEventsDescriptor OPTIONAL,
		signalsDescriptor		[1] SignalsDescriptor OPTIONAL,
		...
	}

	NotifyBehaviour ::= CHOICE
	{
		notifyImmediate			[0] NULL,
		notifyRegulated			[1] RegulatedEmbeddedDescriptor,
		neverNotify				[2] NULL,
		...
	}

	RequestedActions ::= SEQUENCE
	{
		keepActive				[0] BOOLEAN OPTIONAL,
		eventDM					[1] EventDM OPTIONAL,
		secondEvent				[2] SecondEventsDescriptor OPTIONAL,
		signalsDescriptor		[3] SignalsDescriptor OPTIONAL,
		...,
		notifyBehaviour			[4] NotifyBehaviour OPTIONAL,
		resetEventsDescriptor	[5] NULL OPTIONAL
	}

	EventDM ::= CHOICE
	{
		digitMapName			[0] DigitMapName,
		digitMapValue			[1] DigitMapValue
	}
	
	SecondEventsDescriptor ::= SEQUENCE
	{
		requestID				[0] RequestID OPTIONAL,
		eventList				[1] SEQUENCE OF SecondRequestedEvent,
		...
	}

	SecondRequestedEvent ::= SEQUENCE
	{
		pkgdName				[0] PkgdName,
		streamID				[1] StreamID OPTIONAL,
		eventAction				[2] SecondRequestedActions OPTIONAL,
		evParList				[3] SEQUENCE OF EventParameter,
		...
	}

	SecondRequestedActions ::= SEQUENCE
	{
		keepActive				[0] BOOLEAN OPTIONAL,
		eventDM					[1] EventDM OPTIONAL,
		signalsDescriptor		[2] SignalsDescriptor OPTIONAL,
		...,
		notifyBehaviour			[3] NotifyBehaviour OPTIONAL,
		resetEventsDescriptor	[4] NULL OPTIONAL
	}
	
	EventBufferDescriptor ::= SEQUENCE OF EventSpec

	EventSpec ::= SEQUENCE
	{
		eventName				[0] EventName,
		streamID				[1] StreamID OPTIONAL,
		eventParList			[2] SEQUENCE OF EventParameter,
		...
	}

	SignalsDescriptor ::= SEQUENCE OF SignalRequest
	
	SignalRequest ::=CHOICE
	{
		signal					[0] Signal,
		seqSigList				[1] SeqSigList,
		...
	}

	SeqSigList ::= SEQUENCE
	{
		id						[0] INTEGER(0..65535),
		signalList				[1] SEQUENCE OF Signal
	}

	Signal ::= SEQUENCE
	{
		signalName				[0] SignalName,
		streamID				[1] StreamID OPTIONAL,
		sigType					[2] SignalType OPTIONAL,
		duration				[3] INTEGER (0..65535) OPTIONAL,
		notifyCompletion		[4] NotifyCompletion OPTIONAL,
		keepActive				[5] BOOLEAN OPTIONAL,
		sigParList				[6] SEQUENCE OF SigParameter,
		...,
		direction				[7] SignalDirection OPTIONAL,
		requestID				[8] RequestID OPTIONAL,
		intersigDelay			[9] INTEGER (0..65535) OPTIONAL
	}

	SignalType ::= ENUMERATED
	{
		brief(0),
		onOff(1),
		timeOut(2),
		...
	}

	SignalDirection ::= ENUMERATED
	{
		internal(0),
		external(1),
		both(2),
		...
	}

--	SignalName ::= PkgdName
	SignalName ::= OCTET STRING 

	NotifyCompletion ::= BIT STRING
	{
		onTimeOut(0), onInterruptByEvent(1),
		onInterruptByNewSignalDescr(2), otherReason(3), onIteration(4)
	}

	SigParameter ::= SEQUENCE
	{
--		sigParameterName		[0] Name,
--		value					[1] Value,
		sigParameterName		[0] SigParameterName,
		value					[1] SigParamValues,
	-- For use of extraInfo see the comment related to PropertyParm
		extraInfo				[2] CHOICE
		{
			relation	[0] Relation,
			range		[1] BOOLEAN,
			sublist		[2] BOOLEAN
		} OPTIONAL,
	...
	}
-- Wireshark specific	
	SigParameterName ::= Name
	  
	SigParamValues ::= SEQUENCE OF SigParamValue
	  
	SigParamValue ::= OCTET STRING
-- end
	-- For an AuditCapReply with all events, the RequestID shall be ALL.
	-- ALL is represented by 0xffffffff.
	RequestID ::= INTEGER(0..4294967295) -- 32-bit unsigned integer

	ModemDescriptor ::= SEQUENCE
	{
		mtl					[0] SEQUENCE OF ModemType,
		mpl					[1] SEQUENCE OF PropertyParm,
		nonStandardData		[2] NonStandardData OPTIONAL
	}

	ModemType ::= ENUMERATED
	{
		v18(0),
		v22(1),
		v22bis(2),
		v32(3),
		v32bis(4),
		v34(5),
		v90(6),
		v91(7),
		synchISDN(8),
		...
	}

	DigitMapDescriptor ::= SEQUENCE
	{
		digitMapName			[0] DigitMapName OPTIONAL,
		digitMapValue			[1] DigitMapValue OPTIONAL
	}

	DigitMapName ::= Name

	DigitMapValue ::= SEQUENCE
	{
		startTimer				[0] INTEGER(0..99) OPTIONAL,
		shortTimer				[1] INTEGER(0..99) OPTIONAL,
		longTimer				[2] INTEGER(0..99) OPTIONAL,
		digitMapBody			[3] IA5String,
		-- Units are seconds for start, short and long timers, and hundreds
		-- of milliseconds for duration timer. Thus start, short, and long
		-- range from 1 to 99 seconds and duration from 100 ms to 9.9 s
		-- See A.3 for explanation of DigitMap syntax
		...,
		durationTimer			[4] INTEGER (0..99) OPTIONAL
	}

	ServiceChangeParm ::= SEQUENCE
	{
		serviceChangeMethod			[0] ServiceChangeMethod,
		serviceChangeAddress		[1] ServiceChangeAddress OPTIONAL,
		serviceChangeVersion		[2] INTEGER(0..99) OPTIONAL,
		serviceChangeProfile		[3] ServiceChangeProfile OPTIONAL,
--		serviceChangeReason			[4] Value,
		serviceChangeReason			[4] SCreasonValue,
		-- A serviceChangeReason consists of a numeric reason code
		-- and an optional text description.
		-- The serviceChangeReason shall be a string consisting of
		-- a decimal reason code, optionally followed by a single
		-- space character and a textual description string.
		-- This string is first BER-encoded as an IA5String.
		-- The result of this BER-encoding is then encoded as
		-- an ASN.1 OCTET STRING type, "double wrapping" the
		-- value as was done for package elements.

		serviceChangeDelay			[5] INTEGER(0..4294967295) OPTIONAL,
		-- 32-bit unsigned integer
		serviceChangeMgcId			[6] MId OPTIONAL,
		timeStamp					[7] TimeNotation OPTIONAL,
		nonStandardData				[8] NonStandardData OPTIONAL,
		...,
		serviceChangeInfo			[9] AuditDescriptor OPTIONAL,
		serviceChangeIncompleteFlag [10] NULL OPTIONAL
	}

-- Wireshark extension to decode serviceChangeReason
	SCreasonValue ::= SEQUENCE OF SCreasonValueOctetStr
	SCreasonValueOctetStr ::= OCTET STRING
	ServiceChangeReasonStr ::= IA5String
-- end

	ServiceChangeAddress ::= CHOICE
	{
		portNumber					[0] INTEGER(0..65535), -- TCP/UDP port number
		ip4Address					[1] IP4Address,
		ip6Address					[2] IP6Address,
		domainName					[3] DomainName,
		deviceName					[4] PathName,
		mtpAddress					[5] MtpAddress,
		...
	}

	ServiceChangeResParm ::= SEQUENCE
	{
		serviceChangeMgcId			[0] MId OPTIONAL,
		serviceChangeAddress		[1] ServiceChangeAddress OPTIONAL,
		serviceChangeVersion		[2] INTEGER(0..99) OPTIONAL,
		serviceChangeProfile		[3] ServiceChangeProfile OPTIONAL,
		timestamp					[4] TimeNotation OPTIONAL,
		...
	}

	ServiceChangeMethod ::= ENUMERATED
	{
		failover(0),
		forced(1),
		graceful(2),
		restart(3),
		disconnected(4),
		handOff(5),
		...
	}

	ServiceChangeProfile ::= SEQUENCE
	{
		profileName		[0] IA5String(SIZE (1..67))
		-- 64 characters for name, 1 for "/", 2 for version to match ABNF
	}

	PackagesDescriptor ::= SEQUENCE OF PackagesItem

	PackagesItem ::= SEQUENCE
	{
		packageName					[0] Name,
		packageVersion				[1] INTEGER(0..99),
		...
	}

	StatisticsDescriptor ::= SEQUENCE OF StatisticsParameter

	StatisticsParameter ::= SEQUENCE
	{
		statName					[0] PkgdName,
		statValue					[1] Value OPTIONAL
	}
	-- If statistic consists of a sub-lists there will be more than
	-- one octetstring in statValue.
	NonStandardData ::= SEQUENCE
	{
		nonStandardIdentifier		[0] NonStandardIdentifier,
		data						[1] OCTET STRING
	}

	NonStandardIdentifier ::= CHOICE
	{
		object						[0] OBJECT IDENTIFIER,
		h221NonStandard				[1] H221NonStandard,
		experimental				[2] IA5String(SIZE(8)),
		-- first two characters should be "X-" or "X+"
		...
	}

	H221NonStandard ::= SEQUENCE
	{	
		t35CountryCode1				[0] INTEGER(0..255),
		t35CountryCode2				[1] INTEGER(0..255),	-- country, as per T.35
		t35Extension				[2] INTEGER(0..255),	-- assigned nationally
		manufacturerCode			[3] INTEGER(0..65535),	-- assigned nationally
		...
	}

	TimeNotation ::= SEQUENCE
	{
		date						[0] IA5String(SIZE(8)), -- yyyymmdd format
		time						[1] IA5String(SIZE(8)) -- hhmmssss format
		-- per ISO 8601:2004
	}

	Value ::= SEQUENCE OF OCTET STRING

END