Age | Commit message (Collapse) | Author | Files | Lines |
|
Add plural translations in capture file dialog preview.
Reworded text for "error after X records(s)" to use same format
as similar messages.
Change-Id: I7b2c8811a9c0c0f76587c5aad1a648a1b969f37a
Reviewed-on: https://code.wireshark.org/review/27412
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
|
|
Let the Save dialog fixup the extension on accepting the dialog.
Otherwise it is possible that files are silently overwritten without
prompting. Additionally, if a user decides to save a pcapng file as
"foo.pcap", do not try to rename it to "foo.pcap.pcapng".
This change is limited to macOS and Linux because Windows uses a
different file dialog. Tested with both macOS and Linux.
Bug: 14600
Change-Id: Ie0bc1f579766a04f0aad96dcd5daba3fffef9764
Reviewed-on: https://code.wireshark.org/review/27188
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
|
|
The default Qt behavior for extension adjustment is quite bad. When the
file type filter is changed, the extension always becomes "gz" because
"pcap.gz" happens to be the first extension in the list. It also did not
check that the last suffix is actually a valid extension (e.g.
"capture.2018.01" became "capture.2018.gz").
Improvements:
- Respect the "compression" checkbox when adjusting the filename.
- Replace the extension only if it is a known one, append otherwise.
- Use a better default extension (from "wtap_default_file_extension").
Affects only macOS and Linux since Windows has its own native dialog.
See also https://bugreports.qt.io/browse/QTBUG-67993
Bug: 14600
Change-Id: I8cd0788f2abac0c6d7e29490b1ebb381f5a926d0
Reviewed-on: https://code.wireshark.org/review/27186
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
|
|
Move */ to a separate line below the SPDX identifier.
Change-Id: Id1032215449cfccae0933147b45e04b65e0b727f
Reviewed-on: https://code.wireshark.org/review/27211
Reviewed-by: Anders Broman <a.broman58@gmail.com>
|
|
In macOS dialogs, there's a default button, which is the button that
Enter/Return activates, and that Enter/Return *always* activates,
*regardless* of what button has the input focus. To activate the button
that has the input focus, you use the space bar.
To implement that, we need to disable auto-default on all buttons,
including the Cancel button.
Put in a comment explaining all this.
We may want to do this in all alert boxes, and possibly all dialogs with
buttons.
Change-Id: I214dd2870a9720ea705d8db39adc5b6af2003fb1
Reviewed-on: https://code.wireshark.org/review/26629
Reviewed-by: Guy Harris <guy@alum.mit.edu>
|
|
Currently the "Continue without Saving" button is visually highlighted
in the "Unsaved packets..." dialog, but pressing Enter triggers "Save"
instead. Even after changing button focus with arrow or tab keys,
pressing Enter will not confirm the action (but Spacebar does).
Restore the expected behavior for Linux and Windows, but preserve the
fix for macOS since (for which this was originally added).
Bug: 14531
Change-Id: Ic20fc5809b55949f6fd960bcb32618a4fa7fd1e9
Fixes: v2.3.0rc0-2672-gb0335359e5 ("Qt: Give discard button focus (but not as default)")
Reviewed-on: https://code.wireshark.org/review/26511
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
|
|
A file might contain only metadata records, which exist only to provide
information needed to interpret data records; no point in showing them
in record counts.
Put the counts into the structure that we fill in, and rename the
structure and the routine to reflect that it determines statistics other
than just times.
Speak of data records rather than packets; the file might be full of
Sysdig event records but not have any packets in it, for example.
Change-Id: I8553181dca4129736bdae2c0cbba92becc28d6ef
Reviewed-on: https://code.wireshark.org/review/25722
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
|
|
Change-Id: I7f19b35032a686dfb2f776e8ff3527366b008331
Reviewed-on: https://code.wireshark.org/review/25718
Reviewed-by: Guy Harris <guy@alum.mit.edu>
|
|
Don't have all the file open dialogs have their own copies.
Change-Id: Icd6f2fd44b081575e6481a134027c90046938c64
Reviewed-on: https://code.wireshark.org/review/25717
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
|
|
Separate the stuff that any record could have from the stuff that only
particular record types have; put the latter into a union, and put all
that into a wtap_rec structure.
Add some record-type checks as necessary.
Change-Id: Id6b3486858f826fce4b096c59231f463e44bfaa2
Reviewed-on: https://code.wireshark.org/review/25696
Reviewed-by: Guy Harris <guy@alum.mit.edu>
|
|
The first is deprecated, as per https://spdx.org/licenses/.
Change-Id: I8e21e1d32d09b8b94b93a2dc9fbdde5ffeba6bed
Reviewed-on: https://code.wireshark.org/review/25661
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Petri-Dish: Dario Lombardo <lomato@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
|
|
We explicitly allow the not to, and, for example, Simple Packet Blocks
in pcapng files don't have time stamps.
Change-Id: I6c8921cf092de7831d0a3d6dab8467388f4e6286
Reviewed-on: https://code.wireshark.org/review/25625
Reviewed-by: Guy Harris <guy@alum.mit.edu>
|
|
Change-Id: I111945c08f99818c249a868c12d9a7b3a3df64b3
Reviewed-on: https://code.wireshark.org/review/25563
Reviewed-by: Michael Mann <mmann78@netscape.net>
|
|
At one point, I remember a discussion resulting in the official name of
the next-generation replacement for pcap format being changed to
"pcapng", with no hyphen.
Make Wireshark reflect that.
Change-Id: Ie66fb13a0fe3a8682143106dab601952e9154e2a
Reviewed-on: https://code.wireshark.org/review/25214
Reviewed-by: Guy Harris <guy@alum.mit.edu>
|
|
The split isn't necessary now that epan no longer uses the capture_file
structure.
Change-Id: Ia232712a2fb5db511865805518e8d03509b2167f
Reviewed-on: https://code.wireshark.org/review/24693
Reviewed-by: Guy Harris <guy@alum.mit.edu>
|
|
Have cfile-int.h declare the structure, and use it in files that
directly access the structure.
Have cfile.h just incompletely declare the structure and include it
rather than explicitly declaring it in source files or other header
files.
Never directly refer to struct _capture_file except when typedeffing
capture_file.
Add #includes as necessary, now that cfile.h doesn't drag in a ton of
Change-Id: I7931c8039d75ff7c980b0f2a6e221f20e602a556
Reviewed-on: https://code.wireshark.org/review/24686
Reviewed-by: Guy Harris <guy@alum.mit.edu>
|
|
Following the move for widgets directory, moving utils
to the utils directory. Guidelines for this directory are:
- Generic use but not a widget
- Utility functionality used by many classes
Note: additionally all includes affected by this move have been changed
to absolute path includes, instead of relative ones.
Change-Id: I019ae4b6e6f6d06a5745a63ed195edbd36fb936b
Reviewed-on: https://code.wireshark.org/review/22602
Petri-Dish: Roland Knall <rknall@gmail.com>
Reviewed-by: Roland Knall <rknall@gmail.com>
|
|
Packet ranges are used only in the UI; move the packet range stuff into
libui.
Don't pass a print_args_t structure to libwireshark packet-printing
routines, just pass the few parameters they need. Move the declaration
of print_args_t into file.h.
Change-Id: Icff5991eea7d7d56f33b4716105895263d275bcf
Reviewed-on: https://code.wireshark.org/review/21308
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
|
|
Change-Id: I4c09092aba986c4fe224a46cac23d70bc5915aa6
Reviewed-on: https://code.wireshark.org/review/20923
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
|
|
Change-Id: Ifb23f4d558aa30df4ec436e42a4e23b23c2af110
Reviewed-on: https://code.wireshark.org/review/20566
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
|
|
Set focus to the discard button in the "Unsaved packet" and
"Unsaved comments" dialogs to enable spacebar for discard and
enter for save.
Bug: 13363
Change-Id: I576b02c4e3f0964aef56a0f1c06ed57c6ba683bf
Reviewed-on: https://code.wireshark.org/review/20485
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
|
|
The check*.pl scripts presume that files with the prefix "packet-"
are dissector files and therefore have different rules than other
files. Rather than trying to clarify that more with additional
directory information, just make any non-dissector file with
"packet-" filename prefix conform if it fails a "dissector specific"
check from the scripts.
Change-Id: I7cb52e1fad4ea62320492bb690904260f958aeb4
Reviewed-on: https://code.wireshark.org/review/19304
Petri-Dish: Michael Mann <mmann78@netscape.net>
Reviewed-by: Dario Lombardo <lomato@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
|
|
Restore File->Save As and File->Export Specified Packets functionalities broken by commit c711bc64573e20e343f343a53ad4d1d50add433d.
Change-Id: I5d246d296979b5e509a90569094d672083b06b9b
Reviewed-on: https://code.wireshark.org/review/17783
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
|
|
In the capture file dialog's "Files of type" combobox separate out the
wildcards we display from the ones that are applied. Set the
HideNameFilterDetails option and for "All Files" and "All Capture Files"
leave the option hidden.
For other options print the wildcard list twice so that it's both
displayed and applied. Go even further and filter out ".gz" wildcards in
the displayed list since they're effectively duplicates of their
uncompressed counterparts.
Based on Dario's work in change 17605.
Bug: 12837
Change-Id: I35de8f31492657e37b12ca4c8de5ed9e79d2e2f8
Reviewed-on: https://code.wireshark.org/review/17689
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Dario Lombardo <lomato@gmail.com>
Tested-by: Dario Lombardo <lomato@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
|
|
Tried to poke various fields (including the capture filter field), this
revealed some memleaks.
Change-Id: I1eca431a09839906a4b3c902ad85e55bffc71ca8
Reviewed-on: https://code.wireshark.org/review/17648
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
|
|
We support reading some types of files that aren't capture files, in
case we have a dissector for that file format (because, for example,
it's often transported over HTTP). Don't include them in the set of
files "All Capture Files" matches; you can still look for them as they
have individual entries in the drop-down menu of file type patterns.
Ultimately, there should be Fileshark/TFileshark programs to read those
files - and other file types, and even capture files if the goal is to
look at the file structure rather than at the packets - and *that's* the
program that should offer the ability to load JPEGs and so on.
(No, this does not reduce the "All Capture Files" list down to a level
that makes the problem in bug 12837 go away. The right way to fix
*that* is to arrange, somehow, that the "All Capture Files" entry not
actually list all the suffixes it matches.)
Change-Id: I705bff5fcd0694c6c6a11892621a195aa7cd0264
Reviewed-on: https://code.wireshark.org/review/17619
Reviewed-by: Guy Harris <guy@alum.mit.edu>
|
|
A single name resolution checkbox was added to the file dialog way back
in 2000 in g0f7cf64. At that time it was needed because resolution was
synchronous and could drastically affect your load time. Since then
we've added asynchronous name resolution and more recently made it
mandatory (ge005bc8). We've also added more name resolution checkboxes
and other controls.
Remove the name resolution checkboxes. You can just as easily change
resolution options before or after opening a file and they take up
valuable real estate.
Combine the size and packets in the Qt and Win32 dialogs and
pretty-print the size. Combine the start and elapsed times in the Qt,
Win32, and GTK+ dialogs. This lets us shrink the custom areas of the
file dialogs even further. Make the default file type combo item more
descriptive.
Change-Id: Id770adc0f284a4c7f08ee5a7db84f8435f4bf907
Reviewed-on: https://code.wireshark.org/review/17597
Tested-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
|
|
Change-Id: Ib7b66b4e1d600048b8a66b47d035c27ef126da29
Reviewed-on: https://code.wireshark.org/review/16275
Petri-Dish: Dario Lombardo <lomato@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
|
|
That way each (CaptureFileDialog) user doesn't have to (remember to) check the
preference, etc., to figure out what directory to start in.
Change-Id: Ifa60e1ef9dbd11689a3f72906997cf3ed8ce259c
Reviewed-on: https://code.wireshark.org/review/14550
Petri-Dish: Jeff Morriss <jeff.morriss.ws@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Michael Mann <mmann78@netscape.net>
|
|
It's *.* on Windows, but just * on UN*X; add a header that provides the
definition, and use it instead of hardwiring *.*.
Call the entry "All Files", that being the conventional name, rather
than "Any File", whilst we're at it.
Change-Id: I7c29324fc5b41e93c150e1ec67f1529f171dc6a3
Reviewed-on: https://code.wireshark.org/review/14243
Reviewed-by: Guy Harris <guy@alum.mit.edu>
|
|
On Windows, the pattern that matches all files is *.*; *, by itself,
doesn't work, as I remember. UN*Xes take the pattern a bit more
literally, so if it has a dot in it, it has to match a dot.
Bug: 12203
Change-Id: I11518c29c4ffd73485bad6e49b6dd9cc16bbd0b0
Reviewed-on: https://code.wireshark.org/review/14233
Reviewed-by: Guy Harris <guy@alum.mit.edu>
|
|
When using QMessageBox with custom buttons, exec() function returns
an opaque value. Therefore we should use clickedButton() to determine
which button was clicked.
Example in https://wiki.qt.io/Custom_QMessageBox_Buttons
Change-Id: I81824414e31345bb9ea77f72f1b4cdeaa21d2781
Reviewed-on: https://code.wireshark.org/review/13523
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
|
|
Fixed code layout to use common style in the file.
Mostly whitespace changes.
Change-Id: Id37b57717a9e26248fad07322dff09b1d1f45ac2
Reviewed-on: https://code.wireshark.org/review/13504
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
|
|
This matches what the Windows file open dialog says, and also should
help prevent people thinking that it's a display filter, so that you can
clear it and see all the packets in the file.
I leave translations to native speakers.
Bug: 11708
Change-Id: I060816357bf7958d516429d09708a7ce16d609c5
Reviewed-on: https://code.wireshark.org/review/11877
Reviewed-by: Guy Harris <guy@alum.mit.edu>
|
|
Change-Id: I460559c99c79c9fd40f284c750d64210fe5de50b
Reviewed-on: https://code.wireshark.org/review/10813
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
|
|
Change-Id: Ic02b0c86e55751a27d5d0417f4f5314def69e794
Reviewed-on: https://code.wireshark.org/review/9550
Reviewed-by: Guy Harris <guy@alum.mit.edu>
|
|
Todo: qcustomplot via upstream
Change-Id: I19cf98f1281ecb1f6efbb7d36c997d5aa43f5baf
Reviewed-on: https://code.wireshark.org/review/9547
Reviewed-by: Jörg Mayer <jmayer@loplof.de>
|
|
Make sure ExportDissectionDialog is a non-native, funny-looking file
dialog so that we can fetch its layout.
Fix and add some URLs while we're here.
Bug: 11122
Change-Id: Icf62f7a436c7ba27ec20f84e7c1af1a5d7c9b949
Reviewed-on: https://code.wireshark.org/review/8479
Reviewed-by: Gerald Combs <gerald@wireshark.org>
|
|
Add PacketList::applyRecentColumnWidths which set the packet list
column widths from our recent settings. Make sure it gets called at
startup and when we change profiles.
Save the packet list header state so that we can restore it when we
reset the model (i.e. freezing and thawing) and load a new capture file.
Save the state when the user resizes a column. As a side effect this
works around a weird bug that adjusts the width of column 1 at an
inopportune time.
Add a profileChanging signal so that we can save the main window geometry
in each profile.
Get rid of MainWindow::configurationProfileChanged. It was unused.
Apply saved pane widths and heights. Note that we might want to add a
separate pair of recent settings for the Qt panes.
Use the last opened directory in the capture file dialog.
Git rid of some unneeded Q_UNUSEDs while we're here.
Bug: 10953
Change-Id: I812aff59818cf0b4d1598b580627d32728d2e9d7
Reviewed-on: https://code.wireshark.org/review/7247
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Michal Labedzki <michal.labedzki@tieto.com>
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
|
|
Update several dialog titles to "Wireshark · <subtile...>".
Change-Id: I64645e913500ecd55a008e1609b46385dafe7de9
Reviewed-on: https://code.wireshark.org/review/6127
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
|
|
This reverts commit c0c480d08c175eed4524ea9e73ec86298f468cf4.
A better way to do this is to have the record type be part of struct wtap_pkthdr; that keeps the metadata for the record together and requires fewer API changes. That is in-progress.
Change-Id: Ic558f163a48e2c6d0df7f55e81a35a5e24b53bc6
Reviewed-on: https://code.wireshark.org/review/1741
Reviewed-by: Guy Harris <guy@alum.mit.edu>
|
|
This is the first step towards implementing the mechanisms requestd in
bug 8590; currently, we don't return any records other than packet
records from libwiretap, and just ignore non-packet records in the rest
of Wireshark, but this at least gets the ball rolling.
Change-Id: I34a45b54dd361f69fdad1a758d8ca4f42d67d574
Reviewed-on: https://code.wireshark.org/review/1736
Reviewed-by: Guy Harris <guy@alum.mit.edu>
|
|
This reverts commit 1abeb277f5e6bd27fbaebfecc8184e37ba9d008a.
This isn't building, and looks as if it requires significant work to fix.
Change-Id: I622b1bb243e353e874883a302ab419532b7601f2
Reviewed-on: https://code.wireshark.org/review/1568
Reviewed-by: Guy Harris <guy@alum.mit.edu>
|
|
Start of refactoring Wiretap and breaking structures down into "generally useful fields for dissection" and "capture specific". Since this in intended as a "base" for Wiretap and Filetap, the "wft" prefix is used for "common" functionality.
The "architectural" changes can be found in cfile.h, wtap.h, wtap-int.h and (new file) wftap-int.h. Most of the other (painstaking) changes were really just the result of compiling those new architecture changes.
bug:9607
Change-Id: Ife858a61760d7a8a03be073546c0e7e582cab2ae
Reviewed-on: https://code.wireshark.org/review/1485
Reviewed-by: Michael Mann <mmann78@netscape.net>
|
|
Change-Id: I7ec79840331a5072f12236c27f8dc842c703b23f
Reviewed-on: https://code.wireshark.org/review/773
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
|
|
Change-Id: Idef1829fcc2b7b08783e5288bb6486ce19c4779b
Reviewed-on: https://code.wireshark.org/review/405
Reviewed-by: Evan Huus <eapache@gmail.com>
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
|
|
(Using sed : sed -i '/^ \* \$Id\$/,+1 d')
Fix manually some typo (in export_object_dicom.c and crc16-plain.c)
Change-Id: I4c1ae68d1c4afeace8cb195b53c715cf9e1227a8
Reviewed-on: https://code.wireshark.org/review/497
Reviewed-by: Anders Broman <a.broman58@gmail.com>
|
|
Change 16 / g579e7e1 introduced a breaking change in
capture_file_dialog.cpp on Windows. This works around the problem
temporarily until we come up with a proper fix.
Fix a Q_OS_WIN check while we're at it.
Change-Id: I552d60720e4a45c5144e0047ee3c1fcc7e64f4eb
Reviewed-on: https://code.wireshark.org/review/396
Reviewed-by: Gerald Combs <gerald@wireshark.org>
|
|
The best heuristic can fail, so add possibility to manually choose
capture file format type, so not correctly recognize file format can be
loaded in Wireshark.
On the other side now it is possible to open capture file
as file format to be dissected.
Change-Id: I5a9f662b32ff7e042f753a92eaaa86c6e41f400a
Reviewed-on: https://code.wireshark.org/review/16
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Reviewed-by: Hadriel Kaplan <hadrielk@yahoo.com>
Reviewed-by: Evan Huus <eapache@gmail.com>
Tested-by: Evan Huus <eapache@gmail.com>
|
|
Add menu items for each corresponding item in gtk/main_menubar.c that
calls gtk_stats_tree_cb(). Hopefully that's everything. Note that we use
quite a bit less code than the GTK+ flavor and why we might not want to
do that. Change a few things in ui/qt/CMakeLists.txt to more closely
match the GTK+ version. Add plumbing for tap registrations in
CMakeLists.txt and Makefile.am. Add the ability to copy text as CSV or
YAML.
svn path=/trunk/; revision=53464
|