| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
take a dissector handle as an argument, rather than a pointer to a
dissector function and a protocol ID. Associate dissector handles with
dissector table entries.
svn path=/trunk/; revision=4308
|
|
svn path=/trunk/; revision=4105
|
|
draft-ietf-pim-sm-v2-new-03.
svn path=/trunk/; revision=4104
|
|
have two independent "value_string" tables mapping RFC 1700 address
family numbers to names, nor is there any need to have the BGP dissector
and the PIM dissector have two independent sets of #defines for RFC 1700
address family numbers; put a single "value_string" table in "afn.c" and
put a declaration of it, and #defines for the address family numbers,
into "afn.h", and have the dissectors use that.
Move the #define for PGM into "ipproto.h", and add an entry for it in
the "value_string" table in "ipproto.c".
Have the PGM dissector use the standard Ethereal mechanisms for
resolving addresses, and have it use "value_string" tables for mapping
option types, the OPX bits, and packet types to strings. Use
"bytes_to_str()" to turn byte arrays into strings of hex digits. Pass
the packet type string to "dissect_pgmopts()" as an argument, rather
than making it a global. Don't use "proto_tree_add_XXX_format" routines
if you can possibly just use "proto_tree_add_XXX"; give various fields
the correct radix and type, and VALS() strings if necessary, to make
that happen (and to make filtering on them more pleasant). Put the
type, length, and total length of the options into the protocol tree as
separate fields. Don't have separate type, length, and OPX fields for
every type of option; one field will suffice. Don't format a string
with "sprintf()" and then pass that string to "col_add_fstr()" with a
format of "%s" and the string as an argument - "col_add_fstr()" can
format strings itself (that's what the "f" stands for). Don't byte-swap
and then un-byte-swap IPv4 address fields in the header, just leave them
network byte order to start with. Use the correct fields for
"proto_tree_add_XXX", rather than using the same field multiple times.
Quit early if an address family identifier isn't AFNUM_INET, as that
means the structure we use to dissect the header doesn't match the
actual header.
svn path=/trunk/; revision=3761
|
|
on-top-of-IGMP protocols, e.g. DVMRP.
Label the PIM opcode field "Code" for PIMv1, to distinguish it from the
IGMP type field.
Make that field, and the PIMv2 opcode field, enumerated fields.
For unknown opcode values, put the value into the summary line.
Get rid of some unused variables.
svn path=/trunk/; revision=3635
|
|
svn path=/trunk/; revision=3634
|
|
"header_field_info" structure, including the ones that are later set by
the routines to register fields.
svn path=/trunk/; revision=3561
|
|
svn path=/trunk/; revision=3399
|
|
"packet-ip.h".
Fix Gerald's address in some files while we're at it.
svn path=/trunk/; revision=3366
|
|
so, make it static, and call it only through a handle.
In the ICMPv6 dissector, when we dissect the invoking packet in an
ICMPv6 error or in a redirected header option, make the columns
non-writable, so the summary line for the packet shows it as an ICMPv6
packet, not as the packet included in the ICMPv6 packet.
svn path=/trunk/; revision=3361
|
|
and an update to draft 7 of ICMPv6 name lookups, from Heikki Vatiainen.
Fix some formats in the ICMPv6 dissector to use %u, rather than %d, for
unsigned quantities.
Show various type and code values in ICMPv6 as decimal, not hexadecimal
(they're decimal in the RFCs).
svn path=/trunk/; revision=3360
|
|
add code to check it - I've no idea what's going on with the other
captures where it's not correct, but those captures have a different
(and apparently incorrect) checksum for packets with the *exact same
contents* (other than the checksum) as the PIM packet in the capture
where the checksum is correct, so perhaps those packets actually had bad
checksums.
svn path=/trunk/; revision=3004
|
|
statements.
Move the setting of the Protocol column in various dissectors before
anything is fetched from the packet, and also clear the Info column at
that point in those and some other dissectors, so that if an exception
is thrown, the columns don't reflect the previous protocol.
Make the IP dissector static, as it's called only via dissector tables
or dissector handles. Also make the "dissect the TOS field as the
DiffServ DS field" flag static, as it's not referred to outside of
"packet-ip.c".
In the NCP dissector, refer to the port type through "pinfo" rather than
through the global "pi", as it's a tvbuffified dissector.
svn path=/trunk/; revision=2929
|
|
It was the last dissector that used "old_call_dissector()", and
tvbuffifying it got rid of that, so get rid of "old_call_dissector()".
svn path=/trunk/; revision=2892
|
|
"{old_}heur_dissector_add()", "{old_}conv_dissector_add()", and
"register_dissector()", so that an entry in those tables has associated
with it the protocol index of the protocol the dissector handles (or -1,
if there is no protocol index for it).
This is for future use in a number of places.
(Arguably, "proto_register_protocol()" should take a dissector pointer
as an argument, but
1) it'd have to handle both regular and heuristic dissectors;
2) making it take either a "dissector_t" or a union of that and
a "heur_dissector_t" introduces some painful header-file
interdependencies
so I'm punting on that for now. As with other Ethereal internal APIs,
these APIs are subject to change in the future, at least until Ethereal
1.0 comes out....)
svn path=/trunk/; revision=2849
|
|
protocols, in addition to adding structures to the list of filterable
fields. Give it an extra argument that specifies a "short name" for the
protocol, for use in such places as
pinfo->current_proto;
the dialog box for constructing filters;
the preferences tab for the protocol;
and so on (although we're not yet using it in all those places).
Make the preference name that appears in the preferences file and the
command line for the DIAMETER protocol "diameter", not "Diameter"; the
convention is that the name in question be all-lower-case.
Make some routines and variables that aren't exported static.
Update a comment in the ICP dissector to make it clear that the
dissector won't see fragments other than the first fragment of a
fragmented datagram.
svn path=/trunk/; revision=2810
|
|
ESIS dissectors.
Register the IP dissector and have dissectors that call it directly
(rather than through a port table) call it through a handle.
Add a routine "tvb_set_reported_length()" which a dissector can use if
it was handed a tvbuff that contains more data than is actually in its
part of the packet - for example, handing a padded Ethernet frame to IP;
the routine sets the reported length of the tvbuff (and also adjusts the
actual length, as appropriate). Then use it in IP.
Given that, "ethertype()" can determine how much of the Ethernet frame
was actually part of an IP datagram (and can do the same for other
protocols under Ethernet that use "tvb_set_reported_length()"; have it
return the actual length, and have "dissect_eth()" and "dissect_vlan()"
use that to mark trailer data in Ethernet II frames as well as in 802.3
frames.
svn path=/trunk/; revision=2658
|
|
svn path=/trunk/; revision=2654
|
|
the following:
It is now possible to enable/disable a particular protocol decoding
(i.e. the protocol dissector is void or not). When a protocol
is disabled, it is displayed as Data and of course, all linked
sub-protocols are disabled as well.
Disabling a protocol could be interesting:
- in case of buggy dissectors
- in case of wrong heuristics
- for performance reasons
- to decode the data as another protocol (TODO)
Currently (if I am not wrong), all dissectors but NFS can be disabled
(and dissectors that do not register protocols :-)
I do not like the way the RPC sub-dissectors are disabled (in the
sub-dissectors) since this could be done in the RPC dissector itself,
knowing the sub-protocol hfinfo entry (this is why, I've not modified
the NFS one yet).
Two functions are added in proto.c :
gboolean proto_is_protocol_enabled(int n);
void proto_set_decoding(int n, gboolean enabled);
and two MACROs which can be used in dissectors:
OLD_CHECK_DISPLAY_AS_DATA(index, pd, offset, fd, tree)
CHECK_DISPLAY_AS_DATA(index, tvb, pinfo, tree)
See also the XXX in proto_dlg.c and proto.c around the new functions.
svn path=/trunk/; revision=2267
|
|
- add <stdarg.h> or <varargs.h> in snprintf.h
and remove those inclusions in the other #ifdef NEED_SNPRINTF_H codes
- remove the check of multiple inclusions in source (.c) code
(there is a bit loss of _cpp_ performance, but I prefer the gain of
code reading and maintenance; and nowadays, disk caches and VM are
correctly optimized ;-).
- protect all (well almost) header files against multiple inclusions
- add header (i.e. GPL license) in some include files
- reorganize a bit the way header files are included:
First:
#include <system_include_files>
#include <external_package_include_files (e.g. gtk, glib etc.)>
Then
#include "ethereal_include_files"
with the correct HAVE_XXX or NEED_XXX protections.
- add some HAVE_XXX checks before including some system header files
- add the same HAVE_XXX in wiretap as in ethereal
Please forgive me, if I break something (I've only compiled and regression
tested on Linux).
svn path=/trunk/; revision=2254
|
|
dissectors to be registered as dissectors for particular ports,
registered as heuristic dissectors, and registered as dissectors for
conversations, and have routines to be used both by old-style and
new-style dissectors to call registered dissectors.
Have the code that calls those dissectors translate the arguments as
necessary. (For conversation dissectors, replace
"find_conversation_dissector()", which just returns a pointer to the
dissector, with "old_try_conversation_dissector()" and
"try_conversation_dissector()", which actually call the dissector, so
that there's a single place at which we can do that translation. Also
make "dissector_lookup()" static and, instead of calling it and, if it
returns a non-null pointer, calling that dissector, just use
"old_dissector_try_port()" or "dissector_try_port()", for the same
reason.)
This allows some dissectors that took old-style arguments and
immediately translated them to new-style arguments to just take
new-style arguments; make them do so. It also allows some new-style
dissectors not to have to translate arguments before calling routines to
look up and call dissectors; make them not do so.
Get rid of checks for too-short frames in new-style dissectors - the
tvbuff code does those checks for you.
Give the routines to register old-style dissectors, and to call
dissectors from old-style dissectors, names beginning with "old_", with
the routines for new-style dissectors not having the "old_". Update the
dissectors that use those routines appropriately.
Rename "dissect_data()" to "old_dissect_data()", and
"dissect_data_tvb()" to "dissect_data()".
svn path=/trunk/; revision=2218
|
|
a particular type, rather than taking a varargs list, along the lines of
the "proto_tree_add_XXX_format()" routines.
Replace most calls to "proto_tree_add_item()" and
"proto_tree_add_item_hidden()" with calls to those routines.
Rename "proto_tree_add_item()" and "proto_tree_add_item_hidden()" to
"proto_tree_add_item_old()" and "proto_tree_add_item_hidden_old()", and
add new "proto_tree_add_item()" and "proto_tree_add_item_hidden()"
routines that don't take the item to be added as an argument - instead,
they fetch the argument from the packet whose tvbuff was handed to them,
from the offset handed to them.
svn path=/trunk/; revision=2031
|
|
Add exceptions routines.
Convert proto_tree_add_*() routines to require tvbuff_t* argument.
Convert all dissectors to pass NULL argument ("NullTVB" macro == NULL) as
the tvbuff_t* argument to proto_tree_add_*() routines.
dissect_packet() creates a tvbuff_t, wraps the next dissect call in
a TRY block, will print "Short Frame" on the proto_tree if a BoundsError
exception is caught.
The FDDI dissector is converted to use tvbuff's.
svn path=/trunk/; revision=1939
|
|
dissector.
Don't dissect the payload of any fragmented IPv6 packet unless it's the
initial fragment (that's what we do for IPv4).
svn path=/trunk/; revision=1882
|
|
protocols that run inside IPv4 register themselves with it using
"dissector_add()".
Make various dissectors static if they can be, and get rid of any header
files that no longer contain any information as a result of that change.
svn path=/trunk/; revision=1870
|
|
proto_tree_add_protocol_format()
proto_tree_add_uint_format()
proto_tree_add_ipxnet_format()
proto_tree_add_ipv4_format()
proto_tree_add_ipv6_format()
proto_tree_add_bytes_format()
proto_tree_add_string_format()
proto_tree_add_ether_format()
proto_tree_add_time_format()
proto_tree_add_double_format()
proto_tree_add_boolean_format()
If using GCC 2.x, we can check the print-format against the variable args
passed in. Regardless of compiler, we can now check at run-time that the
field type passed into the function corresponds to what that function
expects (FT_UINT, FT_BOOLEAN, etc.)
Note that proto_tree_add_protocol_format() does not require a value field,
since the value of a protocol is always NULL. It's more intuitive w/o the
vestigial argument.
Fixed a proto_tree_add_item_format-related bug in packet-isis-hello.c
Fixed a variable usage bug in packet-v120.c. (ett_* was used instead of hf_*)
Checked in Guy's fix for the function declearation for proto_tree_add_text()
and proto_tree_add_notext().
svn path=/trunk/; revision=1713
|
|
This change allows you to add a new packet-*.c file and not cause a
recompilation of everything that #include's packet.h
Add the plugin_api.[ch] files ot the plugins/Makefile.am packaging list.
Add #define YY_NO_UNPUT 1 to the lex source so that the yyunput symbol
is not defined, squelching a compiler complaint when compiling the generated
C file.
svn path=/trunk/; revision=1637
|
|
to a type requiring 2-byte or better alignment and was then
dereferenced; doing that requires that the code generated by your
compiler not trap if it makes an unaligned reference, and on most RISC
processors the code generated by the compiler *will* trap on an
unaligned reference by default.
svn path=/trunk/; revision=1480
|
|
dynamically-assigned "ett_" integer values, assigned by
"proto_register_subtree_array()"; this:
obviates the need to update "packet.h" whenever you add a new
subtree type - you only have to add a call to
"proto_register_subtree_array()" to a "register" routine and an
array of pointers to "ett_", if they're not already there, and
add a pointer to the new "ett_" variable to the array, if they
are there;
would allow run-time-loaded dissectors to allocate subtree types
when they're loaded.
svn path=/trunk/; revision=1043
|
|
originally had it.
svn path=/trunk/; revision=901
|
|
svn path=/trunk/; revision=840
|
|
for ip.ip_p and ip6.ip6_nxt (and other IPv6 header chain).
use val_to_str() as much as possible in dissect_{ipv6,pim,ripng}().
make --disable-zlib a default for netbsd (temporary workaround).
svn path=/trunk/; revision=827
|
|
system header file.
svn path=/trunk/; revision=825
|
|
other protocols.
svn path=/trunk/; revision=823
|
|
well.
Add some more protocols to the list of value/string pairs for IP
protocol types.
svn path=/trunk/; revision=822
|
