aboutsummaryrefslogtreecommitdiffstats
path: root/packet-llc.c
AgeCommit message (Collapse)AuthorFilesLines
2001-01-21Remove some more "CHECK_DISPLAY_AS_DATA()" calls and code to setGuy Harris1-5/+1
"pinfo->current_proto", in dissectors always called through dissector tables and handles. Make the IEEE 802.11 dissector static, as it's not called externally. Clear the Info column in the Linux cooked capture and 802.1q VLAN dissectors, before extracting anything from the packet, so that if an exception is thrown, the Info column doesn't reflect the previous protocol. Don't extract the encapsulated protocol in the VLAN dissector until you use it, so that if the frame contains the VLAN ID but not the encapsulated protocol, we at least put the VLAN ID into the protocol tree. svn path=/trunk/; revision=2927
2001-01-18Pull the handling of trailers in Ethernet (as opposed to 802.3) framesGuy Harris1-2/+2
into "ethertype()". svn path=/trunk/; revision=2915
2001-01-11"dissect_llc()" is called for RFC 2684 LLC Encapsulation over ATM, soGuy Harris1-12/+2
LLC *does* have to support bridged frames over ATM; the correct bridge padding is 2 (well, except for bridged 802.6 frames, but, if we ever support that, we just wouldn't add "bridge_pad" to "offset+5" when constructing the next tvbuff). svn path=/trunk/; revision=2874
2001-01-10Make the stuff to handle SNAP frames (OUI, PID, payload) a routine ofGuy Harris1-77/+168
its own; it's used not only by LLC, but by Frame Relay with RFC 2427 and ATM with RFC 2684. Support for RFC 2427-encapsulation Frame Relay packets, from Paul Ionescu. Get rid of the CISCO_IP PPP protocol type - Cisco HDLC uses, in most cases, Ethernet packet types, so use ETHERTYPE_IP instead (they're both 0x0800). svn path=/trunk/; revision=2854
2001-01-09Add an additional "protocol index" argument to "{old_}dissector_add()",Guy Harris1-3/+4
"{old_}heur_dissector_add()", "{old_}conv_dissector_add()", and "register_dissector()", so that an entry in those tables has associated with it the protocol index of the protocol the dissector handles (or -1, if there is no protocol index for it). This is for future use in a number of places. (Arguably, "proto_register_protocol()" should take a dissector pointer as an argument, but 1) it'd have to handle both regular and heuristic dissectors; 2) making it take either a "dissector_t" or a union of that and a "heur_dissector_t" introduces some painful header-file interdependencies so I'm punting on that for now. As with other Ethereal internal APIs, these APIs are subject to change in the future, at least until Ethereal 1.0 comes out....) svn path=/trunk/; revision=2849
2001-01-05X.25-over-LLC support, from Paul Ionescu.Guy Harris1-6/+6
svn path=/trunk/; revision=2829
2001-01-05Clear the Info column before fetching anything from the packet, so thatGuy Harris1-1/+4
if we throw an exception, the stuff from the protocol atop which LLC runs isn't still there. svn path=/trunk/; revision=2826
2001-01-03Have the TR MAC and LLC dissectors register themselves, make themGuy Harris1-2/+4
static, and have other dissectors call them through handles. svn path=/trunk/; revision=2816
2001-01-03Have "proto_register_protocol()" build a list of data structures forGuy Harris1-3/+3
protocols, in addition to adding structures to the list of filterable fields. Give it an extra argument that specifies a "short name" for the protocol, for use in such places as pinfo->current_proto; the dialog box for constructing filters; the preferences tab for the protocol; and so on (although we're not yet using it in all those places). Make the preference name that appears in the preferences file and the command line for the DIAMETER protocol "diameter", not "Diameter"; the convention is that the name in question be all-lower-case. Make some routines and variables that aren't exported static. Update a comment in the ICP dissector to make it clear that the dissector won't see fragments other than the first fragment of a fragmented datagram. svn path=/trunk/; revision=2810
2000-12-28Tvbuffify the CDP, CGMP, ISL, and VTP dissectors.Guy Harris1-27/+8
Add a new subdissector table in the LLC dissector for protocol IDs with a Cisco OUI, and register the CDP, CGMP, and VTMP dissectors in that table, rather than calling them via a switch statement. Register the ISL dissector by name, and have the Ethernet dissector call it via a handle. Fix the handling of the checksum field in the CDP dissector. The strings in CDP are counted, not null-terminated; treat them as such. Fix the handling of the encapsulated frame CRC, and the encapsulated frame, in the ISL dissector, at least for Ethernet frames; it may not be correct for encapsulated Token Ring frames. svn path=/trunk/; revision=2792
2000-11-29Wrap the dissect_fddi() call (with a 4th argument) withGilbert Ramirez1-1/+2
dissect_fddi_not_bitswapped() and dissect_fddi_bitswapped(), both of which use the standard 3-argument tvbuffified-dissector argument list. Add a dissector table called "wtap_encap" which is used to call dissectors from dissect_frame(). The switch() statement from this top-level dissector is removed. The link-layer dissectors register themselves with the "wtap_encap" dissector table. The dissectors are now static where possible. svn path=/trunk/; revision=2708
2000-11-19For each column, have both a buffer into which strings for that columnGuy Harris1-2/+2
can be put, and a pointer to the string for the column, which might or might not point to that buffer. Add a routine "col_set_str()", which sets the string for the column to the string passed to it as an argument; it should only be handed a static string (a string constant would be ideal). It doesn't do any copying, so it's faster than "col_add_str()". Make the routines that append to columns check whether the pointer to the string for the column points to the buffer for the column and, if not, copy the string for the column to the buffer for the column so that you can append to it (so you can use "col_set_str()" and then use "col_append_str()" or "col_append_fstr()"). Convert a bunch of "col_add_str()" calls that take a string constant as an argument to "col_set_str()" calls. Convert some "col_add_fstr()" calls that take a string constant as the only argument - i.e., the format string doesn't have any "%" slots into which to put strings for subsequent arguments to "col_set_str()" calls (those calls are just like "col_add_str()" calls). Replace an END_OF_FRAME reference in a tvbuffified dissector with a "tvb_length(tvb)" call. svn path=/trunk/; revision=2670
2000-11-16Tvbuffify the STP dissector, have it register itself and have the LLCGuy Harris1-9/+19
dissector call it through a handle, and make it static. Give "dissect_data()" an "offset" argument, so dissectors can use it to dissect part of the packet without having to cook up a new tvbuff. Go back to using "dissect_data()" to dissect the data in an IPP request. svn path=/trunk/; revision=2651
2000-08-25Include the control-field information in the Info column for LLC frames.Guy Harris1-9/+4
svn path=/trunk/; revision=2370
2000-08-13Add the "Edit:Protocols..." feature which currently only implementsLaurent Deniel1-1/+3
the following: It is now possible to enable/disable a particular protocol decoding (i.e. the protocol dissector is void or not). When a protocol is disabled, it is displayed as Data and of course, all linked sub-protocols are disabled as well. Disabling a protocol could be interesting: - in case of buggy dissectors - in case of wrong heuristics - for performance reasons - to decode the data as another protocol (TODO) Currently (if I am not wrong), all dissectors but NFS can be disabled (and dissectors that do not register protocols :-) I do not like the way the RPC sub-dissectors are disabled (in the sub-dissectors) since this could be done in the RPC dissector itself, knowing the sub-protocol hfinfo entry (this is why, I've not modified the NFS one yet). Two functions are added in proto.c : gboolean proto_is_protocol_enabled(int n); void proto_set_decoding(int n, gboolean enabled); and two MACROs which can be used in dissectors: OLD_CHECK_DISPLAY_AS_DATA(index, pd, offset, fd, tree) CHECK_DISPLAY_AS_DATA(index, tvb, pinfo, tree) See also the XXX in proto_dlg.c and proto.c around the new functions. svn path=/trunk/; revision=2267
2000-08-11Don't bump "offset" in the non-SNAP case - it hasn't been set, and weGuy Harris1-3/+1
don't use it there. svn path=/trunk/; revision=2252
2000-08-07Allow either old-style (pre-tvbuff) or new-style (tvbuffified)Guy Harris1-9/+8
dissectors to be registered as dissectors for particular ports, registered as heuristic dissectors, and registered as dissectors for conversations, and have routines to be used both by old-style and new-style dissectors to call registered dissectors. Have the code that calls those dissectors translate the arguments as necessary. (For conversation dissectors, replace "find_conversation_dissector()", which just returns a pointer to the dissector, with "old_try_conversation_dissector()" and "try_conversation_dissector()", which actually call the dissector, so that there's a single place at which we can do that translation. Also make "dissector_lookup()" static and, instead of calling it and, if it returns a non-null pointer, calling that dissector, just use "old_dissector_try_port()" or "dissector_try_port()", for the same reason.) This allows some dissectors that took old-style arguments and immediately translated them to new-style arguments to just take new-style arguments; make them do so. It also allows some new-style dissectors not to have to translate arguments before calling routines to look up and call dissectors; make them not do so. Get rid of checks for too-short frames in new-style dissectors - the tvbuff code does those checks for you. Give the routines to register old-style dissectors, and to call dissectors from old-style dissectors, names beginning with "old_", with the routines for new-style dissectors not having the "old_". Update the dissectors that use those routines appropriately. Rename "dissect_data()" to "old_dissect_data()", and "dissect_data_tvb()" to "dissect_data()". svn path=/trunk/; revision=2218
2000-05-31Add routines for adding items to a protocol tree that take arguments ofGuy Harris1-11/+11
a particular type, rather than taking a varargs list, along the lines of the "proto_tree_add_XXX_format()" routines. Replace most calls to "proto_tree_add_item()" and "proto_tree_add_item_hidden()" with calls to those routines. Rename "proto_tree_add_item()" and "proto_tree_add_item_hidden()" to "proto_tree_add_item_old()" and "proto_tree_add_item_hidden_old()", and add new "proto_tree_add_item()" and "proto_tree_add_item_hidden()" routines that don't take the item to be added as an argument - instead, they fetch the argument from the packet whose tvbuff was handed to them, from the offset handed to them. svn path=/trunk/; revision=2031
2000-05-31Convert LAPD and V.120 dissector to use tvbuff. Convert xdlc dissector-helper,Gilbert Ramirez1-4/+3
too. svn path=/trunk/; revision=2030
2000-05-28In the FDDI and LLC dissectors, extract fields as we use them, so thatGuy Harris1-6/+9
we don't get an exception (and thus a "Short Frame" or "Malformed Frame" entry) until we get to a field that isn't in the frame. svn path=/trunk/; revision=2021
2000-05-28Use "tvb_get_ntoh24()" to extract the OUI from a SNAP header, ratherGuy Harris1-4/+2
than extracting each byte with "tvb_get_guint8()" and then putting them together. svn path=/trunk/; revision=2020
2000-05-19Add protection against 0-length FT_BYTES being added to proto_tree.Gilbert Ramirez1-3/+3
Convert ethertype() and dissect_null() to use tvbuff. svn path=/trunk/; revision=1979
2000-05-16Have tvbuff's keep track of cap_len and pkt_len ('length' and 'reported_length'Gilbert Ramirez1-3/+3
in tvbuff terminology). This is implemented for TVBUFF_REAL and TVBUFF_SUBSET so far; support for TVBUFF_COMPOSITE is coming soon. Throw either ReportedBoundsError or BoundsError. A ReportedBoundsError is reported as "Malformed Frame" since the protocol stated that a certain number of bytes should be available but they weren't. A BoundsError is reported as a "Short Frame" since the snaplen was too short. Register proto_short (BoundsError) and proto_malformed (ReportedBounds) so searches can be made on "short" and "malformed". svn path=/trunk/; revision=1965
2000-05-12In wiretap, set err to 0 before doing anything inside wtap_loop().Gilbert Ramirez1-7/+7
Tethereal was dying on me because err was initialized to some random value. It was this section of code that would exit even if wtap_loop was successful (returned TRUE) because err was never initialized or set to anything. err = load_cap_file(&cf, out_file_type); if (err != 0) { dissect_cleanup(); exit(2); } <BIGGER sheepish grin> Fixed even more errors in LLC dissector. I had inadvertantly used the wrong tvbuff_t* when calling dissect_data_tvb(). There is no way we are going to be successful in this tvbuff conversion w/o regression testing. I'm working on setting up a simple Makefile for regression testing tonight. That's why I'm finding so many bugs in my LLC conversion. </BIGGER sheepish grin> svn path=/trunk/; revision=1946
2000-05-12<sheepish grin>Gilbert Ramirez1-7/+7
Fix error in my conversion to tvbuff routines. Because offset was calculated based on next_tvb, which already knew to skip 8 bytes, I don't have to use "offset+8" in calls to the next non-tvbuff dissectors. </sheepish grin> svn path=/trunk/; revision=1945
2000-05-11Convert LLC dissector to use tvbuffs.Gilbert Ramirez1-56/+65
Non-tvbuff dissectors create a tvbuff when calling dissect_llc() Changed name of current_proto to match string in COL_PROTO ("FDDI" instead of "fddi") Changed short text to be: [Short Frame: %s] where %s is current_proto. svn path=/trunk/; revision=1943
2000-05-11Add tvbuff class.Gilbert Ramirez1-10/+10
Add exceptions routines. Convert proto_tree_add_*() routines to require tvbuff_t* argument. Convert all dissectors to pass NULL argument ("NullTVB" macro == NULL) as the tvbuff_t* argument to proto_tree_add_*() routines. dissect_packet() creates a tvbuff_t, wraps the next dissect call in a TRY block, will print "Short Frame" on the proto_tree if a BoundsError exception is caught. The FDDI dissector is converted to use tvbuff's. svn path=/trunk/; revision=1939
2000-04-17Register a "llc.dsap" dissector table for 802.2 LLC, and have dissectorsGuy Harris1-81/+47
for protocols that run inside 802.2 LLC register themselves with it using "dissector_add()". Make various dissectors static if they can be, and remove from header files declarations of those dissectors. svn path=/trunk/; revision=1872
2000-04-13For I and S frames, the LLC control field is 2 bytes, so make itGuy Harris1-2/+2
FT_UINT16 (that won't break things for U frames, where it's 1 byte). svn path=/trunk/; revision=1838
2000-04-12Change my e-mail address from @tivoli.com to @xiexie.orgGilbert Ramirez1-2/+2
svn path=/trunk/; revision=1831
2000-04-10Add DOCSIS BPDU patch from Johannes Hennecke <Johannes.Hennecke@elsa.de>.Gerald Combs1-1/+10
svn path=/trunk/; revision=1826
2000-04-09The "llc_ctrl_vals[]" value_string table isn't used to generate theGuy Harris1-3/+5
protocol tree text for the control field - that protocol tree entry is added by "dissect_xdlc_control()", which uses "proto_tree_add_uint_format()" - and it's not a simple enumerated field (which is why "proto_tree_add_uint_format()" is used, to show all the various bits of the field). Eliminate it. svn path=/trunk/; revision=1825
2000-04-08The "llc_ctrl_vals[]" value_string table isn't used to generate theGuy Harris1-10/+2
protocol tree text for the control field - that protocol tree entry is added by "dissect_xdlc_control()", which uses "proto_tree_add_uint_format()" - and it's not a simple enumerated field (which is why "proto_tree_add_uint_format()" is used, to more fully describe the field). Eliminate it. svn path=/trunk/; revision=1824
2000-02-15Create a header file for every packet-*.c file. Prune the packet.h file.Gilbert Ramirez1-2/+11
This change allows you to add a new packet-*.c file and not cause a recompilation of everything that #include's packet.h Add the plugin_api.[ch] files ot the plugins/Makefile.am packaging list. Add #define YY_NO_UNPUT 1 to the lex source so that the yyunput symbol is not defined, squelching a compiler complaint when compiling the generated C file. svn path=/trunk/; revision=1637
2000-02-12Squelch a complaint from Visual C++ 6.0 (the code was OK beforehand, atGuy Harris1-2/+2
least as I remember the ANSI C standard, but I guess they're warning you that you might've intended to return the return value of a function but forgot to put a parameter list after the function name). svn path=/trunk/; revision=1626
2000-02-05Note the document that specified the PIDs for VTP and DRiP that go alongGuy Harris1-1/+14
with Cisco's "wacky proprietary protocols atop LLC/SNAP" OUI, and put in "#if 0"ed out code for Cisco's DRiP. svn path=/trunk/; revision=1604
2000-02-05Dissector for Cisco's Virtual Trunking Protocol.Guy Harris1-1/+5
svn path=/trunk/; revision=1603
2000-02-05Cisco Group Management Protocol dissector.Guy Harris1-1/+5
svn path=/trunk/; revision=1601
2000-01-24Add some new SAP values fromGuy Harris1-47/+61
http://www.optimized.com/COMPENDI/REF-SAP.htm svn path=/trunk/; revision=1529
2000-01-24xDLC frames other than I and UI frames may have a payload, e.g. TESTGuy Harris1-42/+13
frames; rename "XDLC_HAS_PAYLOAD()" to "XDLC_IS_INFORMATION()", and if the frame isn't an "information" frame, dissect its payload (if any) as data. svn path=/trunk/; revision=1528
2000-01-24Put the PID of SNAP frames into the protocol tree regardless of whetherGuy Harris1-36/+61
the frame has a payload or not. Note in a comment that in one capture there's a U frame with a function of TEST, rather than UI, that appears to have a payload. svn path=/trunk/; revision=1527
2000-01-23In "dissect_eth()", update "pi.len" and "pi.captured_len" regardless ofGuy Harris1-6/+6
whether we're building a protocol tree or not. Make "dissect_eth()" use "BYTES_ARE_IN_FRAME()" to see if we have a full Ethernet header - it can be called with a non-zero offset, if Ethernet frames are encapsulated inside other frames (e.g., ATM LANE). Make capture routines take an "offset" argument if the corresponding dissect routine takes one (for symmetry, and for Cisco ISL or any other protocol that encapsulates Ethernet or Token-Ring frames inside other frames). Pass the frame lengths to capture routines via the "pi" structure, rather than as an in-line argument, so that they can macros such as "BYTES_ARE_IN_FRAME()" the way the corresponding dissect routines do. Make capture routines update "pi.len" and "pi.captured_len" the same way the corresponding diseect routines do, if the capture routines then call other capture routines. Make "capture_vlan()" count as "other" frames that are too short, the way other capture routines do. svn path=/trunk/; revision=1525
2000-01-22Merge Paul Ionescu's CDP fixes with Guy's. Add #defines to oui.h for CiscoGerald Combs1-4/+8
IOS 9.0 and bridged frame relay and update packet-llc.c accordingly. Add CDP handler to capture_llc() in packet-llc.c. svn path=/trunk/; revision=1524
2000-01-12For the Cisco OUI, always add the protocol ID to the tree if we'reGuy Harris1-8/+9
constructing a protocol tree. Don't add the protocol ID for unknown OUIs unless we're constructing a protocol tree. svn path=/trunk/; revision=1453
2000-01-12Cisco CDP packets appears to be sent as LLC packets with an OUI ofGuy Harris1-2/+22
0x00000c and a protocol ID of 0x2000 - we used to recognize those as CDP because we ignored the OUI and treated all LLC packets as SNAP-encapsulated packets, and treated 0x2000 as an Ethertype, but we now treat only encapsulated-Ethernet and Apple packets as SNAP-encapsulated (and arguably we should handle Apple separately). svn path=/trunk/; revision=1452
2000-01-07Fix Gerald's e-mail address.Guy Harris1-2/+2
svn path=/trunk/; revision=1437
1999-12-29Put a list of known OUIs in "oui.h", along with a declaration ofGuy Harris1-7/+6
"value_string" array for OUIs. Add the OUI for the ATM Forum to that list. Handle the OUI for the ATM Forum in the layer 3 information for ISO TR 9577 in a Broadband Low Layer Information information element (for ATM LANE). Add an initial version of the dissection of TLV values in LANE LE Control frames (I have no frames with TLV values against which to test it, alas). svn path=/trunk/; revision=1385
1999-12-14*** empty log message ***Guy Harris1-6/+5
svn path=/trunk/; revision=1325
1999-12-13Provide #defines for the Group/Individual bit in the DSAP, theGuy Harris1-41/+57
Command/Response bit in the SSAP, and the mask that extracts the rest of the {D,S}SAP. svn path=/trunk/; revision=1316
1999-12-13Break out IG and CR bits of SSAP and DSAPNathan Neulinger1-24/+45
Handle figuring out correct dsap/ssap if the last bit is 0/1 svn path=/trunk/; revision=1315