| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
svn path=/trunk/; revision=7537
|
|
null) to the "fragment_items" structure, and don't pass that value into
"process_reassembled_data()", just have it use the value in the
"fragment_items" structure passed to it.
Make "process_reassembled_data()" capable of handling reassembly done by
"fragment_add_seq_check()", and use it in the ATP and 802.11 dissectors;
give them "reassembled_in" fields. Make "process_reassembled_data()"
handle only the case of a completed reassembly (fd_head != NULL) so that
we can use it in those dissectors without gunking the code up too much.
svn path=/trunk/; revision=7513
|
|
into a subroutine, for use in other dissectors.
Use it in the IPv6 and CLNP dissectors.
svn path=/trunk/; revision=7510
|
|
issue for CLNP, with its 16-bit IDs, which could be duplicated in a
sufficiently large capture even if CLNP implementations don't
deliberately reuse IDs; less of an issue for IPv6, with its 32-bit IDs
and with its prohibition on reuse:
For every packet that is to be fragmented, the source node generates
an Identification value. The Identification must be different than
that of any other fragmented packet sent recently* with the same
Source Address and Destination Address. If a Routing header is
present, the Destination Address of concern is that of the final
destination.
* "recently" means within the maximum likely lifetime of a packet,
including transit time from source to destination and time spent
awaiting reassembly with other fragments of the same packet.
However, it is not required that a source node know the maximum
packet lifetime. Rather, it is assumed that the requirement can
be met by maintaining the Identification value as a simple, 32-
bit, "wrap-around" counter, incremented each time a packet must
be fragmented. It is an implementation choice whether to
maintain a single counter for the node or multiple counters,
e.g., one for each of the node's possible source addresses, or
one for each active (source address, destination address)
combination.
but perhaps we'll ultimately be able to get rid of the old
"fragment_add()" entirely and rename "fragment_add_check()" to
"fragment_add()").
svn path=/trunk/; revision=7507
|
|
Don't use "proto_tree_add_uint_format()" for the source and destination
reference fields, use "proto_tree_add_uint()". Rename the field to make
that work.
Shuffle some stuff around to clean it up.
svn path=/trunk/; revision=7464
|
|
svn path=/trunk/; revision=7463
|
|
attempt reassembly of a higher-level packet that includes the
lower-level packet, use "tvb_bytes_exist()" to check whether all the
data that's to be included in the reassembly is available, rather than
by checking whether the packet is short.
Add some checks of that sort that were missing.
Use the reported length of the packet when doing reassembly.
Make the "iphdrlen" field of a "packet_info" structure be the length of
the IP header in bytes, not in 4-byte words.
svn path=/trunk/; revision=7274
|
|
packets, and add a heuristic dissector list for CLNP payloads not
dissected as COTP packets.
svn path=/trunk/; revision=7197
|
|
(non inactive subset). So there are now two different
lists : "cotp" and the legacy "cotp_is". Cotp_is is
currently only used by H1 dissector. "cotp" will be
used at least by some (possibly unpublished) plugins.
svn path=/trunk/; revision=7072
|
|
svn path=/trunk/; revision=7003
|
|
error packets, the copy of the packet that got the error, rather than
doing it in the CLNP dissector and the ICMP dissector and the ICMPv6
dissector and the PPP dissector for various control protocols; have it
do that work iff "pinfo->in_error_pkt" is set.
svn path=/trunk/; revision=6942
|
|
Rename the "osi_decode_" routines "ositp_decode_", to indicate that
they're for OSI COTP and CLTP.
Fetch the dst_ref field in each dissector, rather than globally, as not
all PDUs have it. In particular, DT PDUs don't have it in classes 0 and
1, so don't put it into the summary line for class 0 and 1 COTP.
Register the CLNP dissector for use by the X.25 dissector.
svn path=/trunk/; revision=6849
|
|
list of packets corresponding to a reassembled pdu
svn path=/trunk/; revision=6807
|
|
svn path=/trunk/; revision=6535
|
|
sequence numbers or offsets and are thus assumed to be received in order
with no duplicates or dropped fragments (e.g., for NetBIOS Frame, where
802.2 LLC guarantees in-order delivery to NetBIOS with no duplicates or
dropped fragments).
"show_fragment_tree()' and "show_fragment_seq_tree()" don't modify the
"fragment_items" to which the "fit" argument points, so make that
argument a "const fragment_items *".
Make all the "fragment_items" tables "static" (as they're not used
outside the modules defining them) and "const" (as they're not
modified).
Add support for reassembly of NetBIOS fragmented requests and responses.
Get rid of an unnecessary include of "packet-tr.c" in the NetBIOS
dissector, and make its table of dissection function pointers static.
Fix some typos in the AppleTalk and NetBIOS dissectors.
svn path=/trunk/; revision=6491
|
|
winapi_cleanup tool written by Patrik Stridvall for the wine
project.
svn path=/trunk/; revision=6117
|
|
equivalents for the toplevel directory. The removal of winsock2.h will
hopefully not cause any problems under MSVC++, as those files using
struct timeval still include wtap.h, which still includes winsock2.h.
svn path=/trunk/; revision=5932
|
|
but for stuff reassembled with "fragment_add_seq()" or
"fragment_add_seq_check()".
Add a "fragment tag" string to the "fragment_items", so that packets
with fragmentation errors can be properly flagged as having "Illegal
fragments" or "Illegal segments" depending on the term used with the
protocol in question.
Make all the dissectors that can use "show_fragment_tree()" or
"show_fragment_seq_tree()", and don't already use them, do so.
svn path=/trunk/; revision=5644
|
|
in the "packet_info" structure instead, as we don't need a pointer for
every single frame in the capture file, just for each frame for which we
currently have an open "epan_dissect_t".
svn path=/trunk/; revision=5614
|
|
argument to "tvb_new_subset()" - just use -1 if the subset tvbuff is to
run to the end of the parent tvbuff.
svn path=/trunk/; revision=5597
|
|
"dissect_osi_options()".
svn path=/trunk/; revision=5318
|
|
svn path=/trunk/; revision=5110
|
|
svn path=/trunk/; revision=5056
|
|
top-level item correspond to the reassembled data, and make the item for
each fragment/segment correspond to the part of that reassembled data
that came from that fragment/segment.
svn path=/trunk/; revision=5025
|
|
protocol that fragmented them, rather than just calling them
"Reassembled". Do the same with uncompressed WCP data.
svn path=/trunk/; revision=4822
|
|
"data source" has a name and a top-level tvbuff, and frames can have a
list of data sources associated with them.
Use the tvbuff pointer to determine which data source is the data source
for a given field; this means we don't have to worry about multiple data
sources with the same name - the only thing the name does is label the
notebook tab for the display of the data source, and label the hex dump
of the data source in print/Tethereal output.
Clean up a bunch of things discovered in the process of doing the above.
svn path=/trunk/; revision=4749
|
|
about them being trashed by setjmp/longjmp (does GCC there stuff them
into registers? They're bigger than 64 bits, so they don't even fit
into a single register on Alpha).
svn path=/trunk/; revision=4636
|
|
"epan/..." pathnames, so as to avoid collisions with header files in any
of the directories in which we look (e.g., "proto.h", as some other
package has its own "proto.h" file which it installs in the top-level
include directory).
Don't add "-I" flags to search "epan", as that's no longer necessary
(and we want includes of "epan" headers to fail if the "epan/" is left
out, so that we don't re-introduce includes lacking "epan/").
svn path=/trunk/; revision=4586
|
|
a fragment unless we've captured all the data in the fragment and (in
IPv4 and CLNP) it has a valid checksum, so that if the first fragment is
a short frame or a frame with an invalid checksum, we'll treat it as if
reassembly weren't enabled, and will dissect what data we have in it,
rather than not dissecting *any* of the fragments above the IP/CLNP
layer.
svn path=/trunk/; revision=4575
|
|
"dissect_frame()" to indicate whether a ReportedBoundsError was due to
the packet being malformed (i.e., the packet was shorter than it's
supposed to be, so the dissector went past the end trying to extract
fields that were supposed to be there) or due to it not being
reassembled (i.e., the packet was fragmented, and we didn't reassemble
it, but just treated the first fragment as the entire packet, so the
dissector went past the end trying to extract fields that were partially
or completely in fragments after that). Mark the latter as being
unreasembled rather than malformed.
Properly initialize, save, and restore that field, and properly set it,
so that works.
svn path=/trunk/; revision=4555
|
|
the list of segments in a desegmented PDU as unsigned, rather than
signed.
Fix some other displays of unsigned quantities with "%d" while we're at
it.
svn path=/trunk/; revision=4516
|
|
structure to the "packet_info" structure; only stuff that's permanently
stored with each frame should be in the "frame_data" structure, and the
"column_info" structure is not guaranteed to hold the column values for
that frame at all times - it was only in the "frame_data" structure so
that it could be passed to dissectors, and, as all dissectors are now
passed a pointer to a "packet_info" structure, it could just as well be
put in the "packet_info" structure.
That saves memory, by shrinking the "frame_data" structure (there's one
of those per frame), and also lets us clean up the code a bit.
svn path=/trunk/; revision=4370
|
|
SPIs.
svn path=/trunk/; revision=4319
|
|
take a dissector handle as an argument, rather than a pointer to a
dissector function and a protocol ID. Associate dissector handles with
dissector table entries.
svn path=/trunk/; revision=4308
|
|
svn path=/trunk/; revision=4269
|
|
structure, we may have to worry about it in more places than the places
that *used* to set "pi.len" and "pi.captured_len", so there's no point
in just saving and restoring it there. We'll remove those
saves/restores, and worry about saves and restores when we find a
problem.
svn path=/trunk/; revision=4245
|
|
structure; they're no longer used.
svn path=/trunk/; revision=4236
|
|
structure, the check for a null tvbuff pointer in "alloc_field_info()",
and the "tvb_create_from_top()" macro; they're no longer needed, as
there's no non-tvbuffified dissector code remaining.
svn path=/trunk/; revision=4205
|
|
svn path=/trunk/; revision=4182
|
|
stuff currently being dissected is part of a packet included in an error
packet (e.g., an ICMP Unreachable packet). Have the TCP dissector not
bother doing reassembly if the TCP segment is part of an error packet,
rather than an actual TCP transmission; other dissectors might want to
treat those packets specially as well.
Add to the "tcpinfo" structure a flag indicating whether the URG flag
was set, rather than having the zero or non-zero value of the urgent
pointer indicate that. (Yes, at least as I read RFC 793, a zero urgent
pointer value isn't useful, as it means "the stuff before this segment
is urgent", but it's certainly possible to put onto the wire a TCP
segment with URG set and a zero urgent pointer.)
Don't dissect the TCP header by grabbing the entire header with
"tvb_memcpy()" and then pulling stuff out of it - extract stuff with
individual tvbuff calls, and put stuff into the protocol tree and the
Info column as we extract it, so that we can dissect a partial header.
This lets us, for example, get the source and destination ports from the
TCP header of the part of a TCP segment included in a minimum-length
ICMPv4 error packet.
svn path=/trunk/; revision=3986
|
|
hand the (possibly-partial) IP datagram to the IP dissector, as we do
for IPv6 datagrams inside ICMPv6 and CLNP datagrams inside CLNP ER PDUs.
When dissecting IPv6 datagrams inside ICMPv6 and CLNP datagrams inside
CLNP ER PDUs, catch the ReportedLengthError exception and ignore it, as
they don't guarantee that all of the original PDU is present.
svn path=/trunk/; revision=3960
|
|
"header_field_info" structure, including the ones that are later set by
the routines to register fields.
svn path=/trunk/; revision=3561
|
|
svn path=/trunk/; revision=3560
|
|
PDU.
svn path=/trunk/; revision=3526
|
|
"reassemble.h", and remove IPv4 dependencies from it.
Use it for OSI CLNP segment reassembly as well.
svn path=/trunk/; revision=3525
|
|
Have "calc_checksum()" just return an indication of the status of the
checksum.
Check the CLNP header checksum, and put display its status.
svn path=/trunk/; revision=3514
|
|
dissector to dissect the datagram inside an error report datagram, save
the current values of the source and destination addresses, and restore
them after the subdissector returns, so that all address columns in the
summary pane will reflect the error datagram, not the datagram that
provoked the error.
Set the Protocol and Info columns upon entry to the ICMPv6 dissector, so
that if we throw an exception they don't reflect the protocol above
ICMPv6.
svn path=/trunk/; revision=3456
|
|
respectively, not Q.931 and Q.2931, in Frame Relay.
When dissecting Q.933-style multiprotocol encapsulated Frame Relay
frames, use the "osinl" dissector table to check for OSI network layer
protocols, include the NLPID in the tvbuff you hand to
"dissector_try_port()" with that dissector table, and put the NLPID into
the protocol tree as an invisible item - the NLPID is considered part of
the PDU for those protocols, so you have to include it in the tvbuff,
and the dissector will put it into the protocol tree.
Also, make sure the top-level entry for the Frame Relay protocol
includes all the bytes preceding the payload, and none of the payload
bytes.
Export a routine to do Q.933-style dissection, and have the WCP
dissector call it, rather than duplicating that code in the WCP
dissector.
Don't register OSI network layer protocols with the "fr.ietf" dissector
table; it's now sufficient to register them with the "osinl" dissector
table, as the Frame Relay dissector now checks that.
Get rid of unnecessary checks for protocols being enabled (if the
dissector is always called through handles or dissector tables, the
common code for handles and dissector tables will do the checks for
you).
Get rid of some unnecessary #includes.
svn path=/trunk/; revision=3211
|
|
In the CLNP dissector, set the source and destination network-layer and
"top-level" addresses; this will cause them to show up in the source and
destination columns of the summary display if you're showing the
network-layer or top-level address (although you'll probably have to
widen those columns significantly to see the entire address), and also
makes them available to subdissectors.
svn path=/trunk/; revision=3131
|
|
usages of tvb_get_ptr(). packet-ieee80211.c still has one bad usage,
in which it *does* modify the tvbuff's data.
svn path=/trunk/; revision=3128
|
