| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
winapi_cleanup tool written by Patrik Stridvall for the wine
project.
svn path=/trunk/; revision=6117
|
|
equivalents for the toplevel directory. The removal of winsock2.h will
hopefully not cause any problems under MSVC++, as those files using
struct timeval still include wtap.h, which still includes winsock2.h.
svn path=/trunk/; revision=5932
|
|
"epan/..." pathnames, so as to avoid collisions with header files in any
of the directories in which we look (e.g., "proto.h", as some other
package has its own "proto.h" file which it installs in the top-level
include directory).
Don't add "-I" flags to search "epan", as that's no longer necessary
(and we want includes of "epan" headers to fail if the "epan/" is left
out, so that we don't re-introduce includes lacking "epan/").
svn path=/trunk/; revision=4586
|
|
svn path=/trunk/; revision=4429
|
|
structure to the "packet_info" structure; only stuff that's permanently
stored with each frame should be in the "frame_data" structure, and the
"column_info" structure is not guaranteed to hold the column values for
that frame at all times - it was only in the "frame_data" structure so
that it could be passed to dissectors, and, as all dissectors are now
passed a pointer to a "packet_info" structure, it could just as well be
put in the "packet_info" structure.
That saves memory, by shrinking the "frame_data" structure (there's one
of those per frame), and also lets us clean up the code a bit.
svn path=/trunk/; revision=4370
|
|
take a dissector handle as an argument, rather than a pointer to a
dissector function and a protocol ID. Associate dissector handles with
dissector table entries.
svn path=/trunk/; revision=4308
|
|
"header_field_info" structure, including the ones that are later set by
the routines to register fields.
svn path=/trunk/; revision=3561
|
|
"ppp_hdlc" dissector, and call the dissector for "raw" PPP (just RFC
1661, no HDLC encapsulation) the "ppp" dissector.
Have the common routine used by both those dissectors take the offset in
the tvbuff of the PPP protocol field as an argument, rather than
assuming that the protocol field begins at the beginning of the tvbuff,
so we don't have to construct a new tvbuff in the
PPP-in-HDLC-like-framing dissector.
Use the PPP dissector, not the PPP-in-HDLC-like-framing dissector, for
PPP over Frame Relay - there's no HDLC header in PPP over Frame Relay,
at least according to
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120t/120t1/pppframe.htm
svn path=/trunk/; revision=3208
|
|
statements.
Move the setting of the Protocol column in various dissectors before
anything is fetched from the packet, and also clear the Info column at
that point in those and some other dissectors, so that if an exception
is thrown, the columns don't reflect the previous protocol.
"Tvbuffify" the Mobile IP dissector (it took old-style arguments, and
then converted them into tvbuff arguments, so there wasn't much to do,
other than to fix references to "fd" to refer to "pinfo->fd").
In the SCTP dissector, refer to the port type and source and destination
ports through "pinfo" rather than through the global "pi", as it's a
tvbuffified dissector.
In the SMTP and Time Protocol dissectors, use "pinfo->match_port" rather
than "TCP_PORT_SMTP" when checking whether the packet is a request or
reply, just in case somebody makes a non-standard port be dissected as
SMTP or Time. (Also, remove a bogus comment from the Time dissector; it
was probably cut-and-pasted from the TFTP dissector.)
svn path=/trunk/; revision=2938
|
|
"{old_}heur_dissector_add()", "{old_}conv_dissector_add()", and
"register_dissector()", so that an entry in those tables has associated
with it the protocol index of the protocol the dissector handles (or -1,
if there is no protocol index for it).
This is for future use in a number of places.
(Arguably, "proto_register_protocol()" should take a dissector pointer
as an argument, but
1) it'd have to handle both regular and heuristic dissectors;
2) making it take either a "dissector_t" or a union of that and
a "heur_dissector_t" introduces some painful header-file
interdependencies
so I'm punting on that for now. As with other Ethereal internal APIs,
these APIs are subject to change in the future, at least until Ethereal
1.0 comes out....)
svn path=/trunk/; revision=2849
|
|
protocols, in addition to adding structures to the list of filterable
fields. Give it an extra argument that specifies a "short name" for the
protocol, for use in such places as
pinfo->current_proto;
the dialog box for constructing filters;
the preferences tab for the protocol;
and so on (although we're not yet using it in all those places).
Make the preference name that appears in the preferences file and the
command line for the DIAMETER protocol "diameter", not "Diameter"; the
convention is that the name in question be all-lower-case.
Make some routines and variables that aren't exported static.
Update a comment in the ICP dissector to make it clear that the
dissector won't see fragments other than the first fragment of a
fragmented datagram.
svn path=/trunk/; revision=2810
|
|
dissect_fddi_not_bitswapped() and dissect_fddi_bitswapped(), both of which
use the standard 3-argument tvbuffified-dissector argument list.
Add a dissector table called "wtap_encap" which is used to call dissectors
from dissect_frame(). The switch() statement from this top-level dissector
is removed.
The link-layer dissectors register themselves with the "wtap_encap"
dissector table. The dissectors are now static where possible.
svn path=/trunk/; revision=2708
|
|
can be put, and a pointer to the string for the column, which might or
might not point to that buffer.
Add a routine "col_set_str()", which sets the string for the column to
the string passed to it as an argument; it should only be handed a
static string (a string constant would be ideal). It doesn't do any
copying, so it's faster than "col_add_str()".
Make the routines that append to columns check whether the pointer to
the string for the column points to the buffer for the column and, if
not, copy the string for the column to the buffer for the column so that
you can append to it (so you can use "col_set_str()" and then use
"col_append_str()" or "col_append_fstr()").
Convert a bunch of "col_add_str()" calls that take a string constant as
an argument to "col_set_str()" calls.
Convert some "col_add_fstr()" calls that take a string constant as the
only argument - i.e., the format string doesn't have any "%" slots into
which to put strings for subsequent arguments to "col_set_str()" calls
(those calls are just like "col_add_str()" calls).
Replace an END_OF_FRAME reference in a tvbuffified dissector with a
"tvb_length(tvb)" call.
svn path=/trunk/; revision=2670
|
|
other dissectors call them through handles. Do the same for the "PPP
payload" dissector, after tvbuffifying it.
Tvbuffify the PPPoE dissector.
Do the last little bit of tvbuffifying the L2TP dissector (it takes
old-style arguments and immediately generates a tvbuff out of them; make
it take new-style arguments).
svn path=/trunk/; revision=2664
|
|
svn path=/trunk/; revision=2311
|
|
the following:
It is now possible to enable/disable a particular protocol decoding
(i.e. the protocol dissector is void or not). When a protocol
is disabled, it is displayed as Data and of course, all linked
sub-protocols are disabled as well.
Disabling a protocol could be interesting:
- in case of buggy dissectors
- in case of wrong heuristics
- for performance reasons
- to decode the data as another protocol (TODO)
Currently (if I am not wrong), all dissectors but NFS can be disabled
(and dissectors that do not register protocols :-)
I do not like the way the RPC sub-dissectors are disabled (in the
sub-dissectors) since this could be done in the RPC dissector itself,
knowing the sub-protocol hfinfo entry (this is why, I've not modified
the NFS one yet).
Two functions are added in proto.c :
gboolean proto_is_protocol_enabled(int n);
void proto_set_decoding(int n, gboolean enabled);
and two MACROs which can be used in dissectors:
OLD_CHECK_DISPLAY_AS_DATA(index, pd, offset, fd, tree)
CHECK_DISPLAY_AS_DATA(index, tvb, pinfo, tree)
See also the XXX in proto_dlg.c and proto.c around the new functions.
svn path=/trunk/; revision=2267
|
|
a particular type, rather than taking a varargs list, along the lines of
the "proto_tree_add_XXX_format()" routines.
Replace most calls to "proto_tree_add_item()" and
"proto_tree_add_item_hidden()" with calls to those routines.
Rename "proto_tree_add_item()" and "proto_tree_add_item_hidden()" to
"proto_tree_add_item_old()" and "proto_tree_add_item_hidden_old()", and
add new "proto_tree_add_item()" and "proto_tree_add_item_hidden()"
routines that don't take the item to be added as an argument - instead,
they fetch the argument from the packet whose tvbuff was handed to them,
from the offset handed to them.
svn path=/trunk/; revision=2031
|
|
(the ip_tcp_options stuff is still non-tvbuff until I convert ip and tcp).
Add preliminary fix for Linux ISDN ippp devices (similar watch was posted
to ethereal-users, but did not use tvbuffs).
Change packet-raw.c to call capture_ppp()/dissect_ppp() in the case
where the frame starts with FF:03. We had been calling
capture_ip()/dissect_ip() at byte offset 4, but I think this is for
historical reasons of packet-raw.c and packet-ip.c existing before
packet-ppp.c.
svn path=/trunk/; revision=1998
|
|
to that file, leave public definitions in wtap.h.
Rename "union pseudo_header" to "union wtap_pseudo_header".
Make the wtap_pseudo_header pointer available in packet_info struct.
svn path=/trunk/; revision=1989
|
|
there's no need to keep it around in memory - when the frame data is
read in when handing a frame, read in the information, if any, necessary
to reconstruct the frame header, and reconstruct it. This saves some
memory.
This requires that the seek-and-read function be implemented inside
Wiretap, and that the Wiretap handle remain open even after we've
finished reading the file sequentially.
This also points out that we can't really do X.25-over-Ethernet
correctly, as we don't know where the direction (DTE->DCE or DCE->DTE)
flag is stored; it's not clear how the Ethernet type 0x0805 for X.25
Layer 3 is supposed to be handled in any case. We eliminate
X.25-over-Ethernet support (until we find out what we're supposed to
do).
svn path=/trunk/; revision=1975
|
|
Note in AUTHORS file that we use the exception module from kazlib.
svn path=/trunk/; revision=1966
|
|
Add exceptions routines.
Convert proto_tree_add_*() routines to require tvbuff_t* argument.
Convert all dissectors to pass NULL argument ("NullTVB" macro == NULL) as
the tvbuff_t* argument to proto_tree_add_*() routines.
dissect_packet() creates a tvbuff_t, wraps the next dissect call in
a TRY block, will print "Short Frame" on the proto_tree if a BoundsError
exception is caught.
The FDDI dissector is converted to use tvbuff's.
svn path=/trunk/; revision=1939
|
|
Change GRE dissector to call dissect_ppp() instead of dissect_payload_ppp().
svn path=/trunk/; revision=1753
|
|
This change allows you to add a new packet-*.c file and not cause a
recompilation of everything that #include's packet.h
Add the plugin_api.[ch] files ot the plugins/Makefile.am packaging list.
Add #define YY_NO_UNPUT 1 to the lex source so that the yyunput symbol
is not defined, squelching a compiler complaint when compiling the generated
C file.
svn path=/trunk/; revision=1637
|
|
dynamically-assigned "ett_" integer values, assigned by
"proto_register_subtree_array()"; this:
obviates the need to update "packet.h" whenever you add a new
subtree type - you only have to add a call to
"proto_register_subtree_array()" to a "register" routine and an
array of pointers to "ett_", if they're not already there, and
add a pointer to the new "ett_" variable to the array, if they
are there;
would allow run-time-loaded dissectors to allocate subtree types
when they're loaded.
svn path=/trunk/; revision=1043
|
|
- more fields added
- more proto_tree_add_item_format and proto_tree_add_text replaced
svn path=/trunk/; revision=855
|
|
- add new filter fields.
If someone has a captured file with this kind of packets,
please sent it to me.
svn path=/trunk/; revision=852
|
|
the base for numbers to be displayed in, bitmasks for bitfields, and blurbs
(which are one or two sentences describing the field).
proto_tree_add*() routines now automatically handle bitfields. You tell
it which header field you are adding, and just pass it the value of the
entire field, and the proto_tree routines will do the masking and shifting
for you.
This means that bitfields are more naturally filtered via dfilter now.
Added Phil Techau's support for signed integers in dfilters/proto_tree.
Added the beginning of the SNA dissector. It's not complete, but I'm
committing it now because it has example after example of how to use
bitfields with the new header_field_info struct and proto_tree routines.
It was the impetus to change how header_field_info works.
svn path=/trunk/; revision=815
|
|
svn path=/trunk/; revision=673
|
|
metadata.
Also added filter items for the session and task number.
svn path=/trunk/; revision=664
|
|
svn path=/trunk/; revision=658
|
|
svn path=/trunk/; revision=654
|
