Age | Commit message (Collapse) | Author | Files | Lines |
|
Also: remove trailing whitespace for a number of files.
git-svn-id: http://anonsvn.wireshark.org/wireshark/trunk@39503 f5534014-38df-0310-8fa8-9805f1628bb7
|
|
FT_STRINGZ, FT_UINT_STRING as follows:
1. If there's no character encoding (ENC_ASCII, ...) specified
then use ENC_ASCII.
2. For all but FT_UINT_STRING, always use ENC_NA
(replacing any existing True/1/FALSE/0
/ENC_BIG_ENDIAN/ENC_LITTLE_ENDIAN).
git-svn-id: http://anonsvn.wireshark.org/wireshark/trunk@39426 f5534014-38df-0310-8fa8-9805f1628bb7
|
|
reference an hf item (in hf[] with types:
FT_NONE
FT_BYTES
FT_IPV6
FT_IPXNET
FT_OID
Note: Encoding field set to ENC_NA only if the field was previously TRUE|FALSE|ENC_LITTLE_ENDIAN|ENC_BIG_ENDIAN
git-svn-id: http://anonsvn.wireshark.org/wireshark/trunk@39260 f5534014-38df-0310-8fa8-9805f1628bb7
|
|
keys to have _uint in their names, to match the routines that handle
dissector tables with string keys. (Using _port can confuse people into
thinking they're intended solely for use with TCP/UDP/etc. ports when,
in fact, they work better for things such as Ethernet types, where the
binding of particular values to particular protocols are a lot
stronger.)
git-svn-id: http://anonsvn.wireshark.org/wireshark/trunk@35224 f5534014-38df-0310-8fa8-9805f1628bb7
|
|
http://www.wireshark.org/lists/wireshark-dev/200809/msg00075.html
(as referenced in https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=2907 ) and
https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=3411 :
Write a new convenience routine for finding a conversation and, if it is not
found, create it. The frame number and addresses are taken from pinfo (as is
the common case).
Use this function in a bunch of dissectors.
git-svn-id: http://anonsvn.wireshark.org/wireshark/trunk@32790 f5534014-38df-0310-8fa8-9805f1628bb7
|
|
git-svn-id: http://anonsvn.wireshark.org/wireshark/trunk@32367 f5534014-38df-0310-8fa8-9805f1628bb7
|
|
Use se_alloc rather than g_malloc for proto_data.
Call conversation_add_proto_data only once.
git-svn-id: http://anonsvn.wireshark.org/wireshark/trunk@31663 f5534014-38df-0310-8fa8-9805f1628bb7
|
|
git-svn-id: http://anonsvn.wireshark.org/wireshark/trunk@31580 f5534014-38df-0310-8fa8-9805f1628bb7
|
|
git-svn-id: http://anonsvn.wireshark.org/wireshark/trunk@30125 f5534014-38df-0310-8fa8-9805f1628bb7
|
|
git-svn-id: http://anonsvn.wireshark.org/wireshark/trunk@29344 f5534014-38df-0310-8fa8-9805f1628bb7
|
|
git-svn-id: http://anonsvn.wireshark.org/wireshark/trunk@29340 f5534014-38df-0310-8fa8-9805f1628bb7
|
|
(1) Trailing/leading spaces are removed from 'name's/'blurb's
(2) Duplicate 'blurb's are replaced with NULL
(3) Empty ("") 'blurb's are replaced with NULL
(4) BASE_NONE, NULL, 0x0 are used for 'display', 'strings' and 'bitmask' fields
for FT_NONE, FT_BYTES, FT_IPv4, FT_IPv6, FT_ABSOLUTE_TIME, FT_RELATIVE_TIME,
FT_PROTOCOL, FT_STRING and FT_STRINGZ field types
(5) Only allow non-zero value for 'display' if 'bitmask' is non-zero
git-svn-id: http://anonsvn.wireshark.org/wireshark/trunk@28770 f5534014-38df-0310-8fa8-9805f1628bb7
|
|
proto_reg_handoff rework.
git-svn-id: http://anonsvn.wireshark.org/wireshark/trunk@26586 f5534014-38df-0310-8fa8-9805f1628bb7
|
|
- if offset is 0, tvb_length is the same as tvb_length_remaining, just faster.
Replace
- col_append_fstr() with faster col_append_str()
- col_add_str() with col_set_str()
when it's safe
git-svn-id: http://anonsvn.wireshark.org/wireshark/trunk@23252 f5534014-38df-0310-8fa8-9805f1628bb7
|
|
to static.
git-svn-id: http://anonsvn.wireshark.org/wireshark/trunk@20062 f5534014-38df-0310-8fa8-9805f1628bb7
|
|
git-svn-id: http://anonsvn.wireshark.org/wireshark/trunk@18196 f5534014-38df-0310-8fa8-9805f1628bb7
|
|
It should be "Authentication" (2x "t") not "Authenication"
git-svn-id: http://anonsvn.wireshark.org/wireshark/trunk@16911 f5534014-38df-0310-8fa8-9805f1628bb7
|
|
git-svn-id: http://anonsvn.wireshark.org/wireshark/trunk@14478 f5534014-38df-0310-8fa8-9805f1628bb7
|
|
1) Added a setup_frame parameter to conversation_t
2) Used the conversation_t next to maintain a list of conversations with the
same src/dest tuple but different setup_frame number.
3) Changed the signature of find_conversation() and conversation_new() to pass
in the frame number.
4) Adjusted packet-sdp to select RTP conversation if both m=audio and m=image
are present, and T.38 conversation if only m=image is present. I expect that
RTP/T.38 dissecting to be better, but I don't have a way to generate T.38
packets.
git-svn-id: http://anonsvn.wireshark.org/wireshark/trunk@13243 f5534014-38df-0310-8fa8-9805f1628bb7
|
|
git-svn-id: http://anonsvn.wireshark.org/wireshark/trunk@12115 f5534014-38df-0310-8fa8-9805f1628bb7
|
|
places, as we also use "defragmentation" and "reassembling". Use reassembling as the general term for such actions.
I (hopefully) didn't changed any protocol fields or preference file names, but only the GUI labels appearing in the protocol display and the protocol preferences.
Also added a note to the protocol preferences (where appropriate), that you have to enable "Allow subdissectors to reassemble TCP streams" at the corresponding protocol settings for TCP reassembling to take effect.
If you encounter any mistakes I've made here, please let me know...
git-svn-id: http://anonsvn.wireshark.org/wireshark/trunk@11784 f5534014-38df-0310-8fa8-9805f1628bb7
|
|
Also move ncp222.py, x11-fields, process-x11-fields.pl,
make-reg-dotc, and make-reg-dotc.py.
Adjust #include lines in files that include packet-*.h
files.
git-svn-id: http://anonsvn.wireshark.org/wireshark/trunk@11410 f5534014-38df-0310-8fa8-9805f1628bb7
|