diff options
Diffstat (limited to 'macosx-setup.sh')
| -rwxr-xr-x | macosx-setup.sh | 343 |
1 files changed, 172 insertions, 171 deletions
diff --git a/macosx-setup.sh b/macosx-setup.sh index 25e7c8a468..8821f71ee5 100755 --- a/macosx-setup.sh +++ b/macosx-setup.sh @@ -939,7 +939,176 @@ uninstall_c_ares() { rm c-ares-$installed_cares_version-done } -uninstall() { +install_all() { + # + # Start with xz: It is the sole download format of glib later than 2.31.2 + # + if [ "$XZ_VERSION" -a ! -f xz-$XZ_VERSION-done ] ; then + install_xz + fi + + if [ "$AUTOCONF_VERSION" -a ! -f autoconf-$AUTOCONF_VERSION-done ] ; then + install_autoconf + fi + + if [ "$AUTOMAKE_VERSION" -a ! -f automake-$AUTOMAKE_VERSION-done ] ; then + install_automake + fi + + if [ "$LIBTOOL_VERSION" -a ! -f libtool-$LIBTOOL_VERSION-done ] ; then + install_libtool + fi + + if [ -n "$CMAKE" -a ! -f cmake-$CMAKE_VERSION-done ]; then + install_cmake + fi + + # + # Start with GNU gettext; GLib requires it, and OS X doesn't have it + # or a BSD-licensed replacement. + # + # At least on Lion with Xcode 4, _FORTIFY_SOURCE gets defined as 2 + # by default, which causes, for example, stpncpy to be defined as + # a hairy macro that collides with the GNU gettext configure script's + # attempts to workaround AIX's lack of a declaration for stpncpy, + # with the result being a huge train wreck. Define _FORTIFY_SOURCE + # as 0 in an attempt to keep the trains on separate tracks. + # + if [ ! -f gettext-$GETTEXT_VERSION-done ] ; then + install_gettext + fi + + # + # GLib depends on pkg-config. + # By default, pkg-config depends on GLib; we break the dependency cycle + # by configuring pkg-config to use its own internal version of GLib. + # + if [ ! -f pkg-config-$PKG_CONFIG_VERSION-done ] ; then + install_pkg_config + fi + + if [ ! -f glib-$GLIB_VERSION-done ] ; then + install_glib + fi + + # + # Now we have reached a point where we can build everything but + # the GUI (Wireshark). + # + if [ "$QT_VERSION" -a ! -f qt-$QT_VERSION-done ]; then + install_qt + fi + + if [ "$GTK_VERSION" ]; then + # + # GTK+ 3 requires a newer Cairo build than the one that comes with + # 10.6, so we build Cairo if we are using GTK+ 3. + # + # In 10.6 and 10.7, it's an X11 library; if we build with "native" GTK+ + # rather than X11 GTK+, we might have to build and install Cairo. + # In 10.8 and later, there is no X11, but it's included in Xquartz; + # again, if we build with "native" GTK+, we'd have to build and install + # it. + # + if [[ "$GTK_MAJOR_VERSION" -eq 3 || "$cairo_not_in_the_os" = yes ]]; then + # + # Requirements for Cairo first + # + # The libpng that comes with the X11 for Leopard has a bogus + # pkg-config file that lies about where the header files are, + # which causes other packages not to be able to find its + # headers. + # + # The libpng in later versions is not what the version of + # libpixman we build below wants - it wants libpng15. + # + if [ ! -f libpng-$PNG_VERSION-done ] ; then + install_libpng + fi + + # + # The libpixman versions that come with the X11s for Leopard, + # Snow Leopard, and Lion is too old to support Cairo's image + # surface backend feature (which requires pixman-1 >= 0.22.0). + # + # XXX - what about the one that comes with the latest version + # of Xquartz? + # + if [ ! -f pixman-$PIXMAN_VERSION-done ] ; then + install_libpixman + fi + + # + # And now Cairo itself. + # XXX - with the libxcb that comes with 10.6, + # xcb_discard_reply() is missing, and the build fails. + # + if [ ! -f cairo-$CAIRO_VERSION-done ] ; then + install_cairo + fi + fi + + if [ ! -f atk-$ATK_VERSION-done ] ; then + install_atk + fi + + if [ ! -f pango-$PANGO_VERSION-done ] ; then + install_pango + fi + + if [ "$GDK_PIXBUF_VERSION" -a ! -f gdk-pixbuf-$GDK_PIXBUF_VERSION-done ] ; then + install_gdk_pixbuf + fi + + if [ ! -f gtk+-$GTK_VERSION-done ] ; then + install_gtk + fi + fi + + # + # Now we have reached a point where we can build everything including + # the GUI (Wireshark), but not with any optional features such as + # SNMP OID resolution, some forms of decryption, Lua scripting, playback + # of audio, or GeoIP mapping of IP addresses. + # + # We now conditionally download optional libraries to support them; + # the default is to download them all. + # + + if [ "$LIBSMI_VERSION" -a ! -f libsmi-$LIBSMI_VERSION-done ] ; then + install_libsmi + fi + + if [ "$LIBGPG_ERROR_VERSION" -a ! -f libgpg-error-$LIBGPG_ERROR_VERSION-done ] ; then + install_libgpg_error + fi + + if [ "$LIBGCRYPT_VERSION" -a ! -f libgcrypt-$LIBGCRYPT_VERSION-done ] ; then + install_libgcrypt + fi + + if [ "$GNUTLS_VERSION" -a ! -f gnutls-$GNUTLS_VERSION-done ] ; then + install_gnutls + fi + + if [ "$LUA_VERSION" -a ! -f lua-$LUA_VERSION-done ] ; then + install_lua + fi + + if [ "$PORTAUDIO_VERSION" -a ! -f portaudio-done ] ; then + install_portaudio + fi + + if [ "$GEOIP_VERSION" -a ! -f geoip-$GEOIP_VERSION-done ] ; then + install_geoip + fi + + if [ "$CARES_VERSION" -a ! -f c-ares-$CARES_VERSION-done ] ; then + install_c_ares + fi +} + +uninstall_all() { if [ -d macosx-support-libs ] then cd macosx-support-libs @@ -1150,7 +1319,7 @@ done if [ "$do_uninstall" = "yes" ] then - uninstall + uninstall_all exit 0 fi @@ -1450,175 +1619,7 @@ then fi cd macosx-support-libs -# Start with xz: It is the sole download format of glib later than 2.31.2 -# -if [ "$XZ_VERSION" -a ! -f xz-$XZ_VERSION-done ] ; then - install_xz -fi - -if [ "$AUTOCONF_VERSION" -a ! -f autoconf-$AUTOCONF_VERSION-done ] ; then - install_autoconf -fi - -if [ "$AUTOMAKE_VERSION" -a ! -f automake-$AUTOMAKE_VERSION-done ] ; then - install_automake -fi - -if [ "$LIBTOOL_VERSION" -a ! -f libtool-$LIBTOOL_VERSION-done ] ; then - install_libtool -fi - -if [ -n "$CMAKE" -a ! -f cmake-$CMAKE_VERSION-done ]; then - install_cmake -fi - -# -# Start with GNU gettext; GLib requires it, and OS X doesn't have it -# or a BSD-licensed replacement. -# -# At least on Lion with Xcode 4, _FORTIFY_SOURCE gets defined as 2 -# by default, which causes, for example, stpncpy to be defined as -# a hairy macro that collides with the GNU gettext configure script's -# attempts to workaround AIX's lack of a declaration for stpncpy, -# with the result being a huge train wreck. Define _FORTIFY_SOURCE -# as 0 in an attempt to keep the trains on separate tracks. -# -if [ ! -f gettext-$GETTEXT_VERSION-done ] ; then - install_gettext -fi - -# -# GLib depends on pkg-config. -# By default, pkg-config depends on GLib; we break the dependency cycle -# by configuring pkg-config to use its own internal version of GLib. -# -if [ ! -f pkg-config-$PKG_CONFIG_VERSION-done ] ; then - install_pkg_config -fi - -if [ ! -f glib-$GLIB_VERSION-done ] ; then - install_glib -fi - -# -# Now we have reached a point where we can build everything but -# the GUI (Wireshark). -# -if [ "$QT_VERSION" -a ! -f qt-$QT_VERSION-done ]; then - install_qt -fi - -if [ "$GTK_VERSION" ]; then - - # - # GTK+ 3 requires a newer Cairo build than the one that comes with - # 10.6, so we build Cairo if we are using GTK+ 3. - # - # In 10.6 and 10.7, it's an X11 library; if we build with "native" GTK+ - # rather than X11 GTK+, we might have to build and install Cairo. - # In 10.8 and later, there is no X11, but it's included in Xquartz; - # again, if we build with "native" GTK+, we'd have to build and install - # it. - # - if [[ "$GTK_MAJOR_VERSION" -eq 3 || "$cairo_not_in_the_os" = yes ]]; then - # - # Requirements for Cairo first - # - # The libpng that comes with the X11 for Leopard has a bogus - # pkg-config file that lies about where the header files are, - # which causes other packages not to be able to find its - # headers. - # - # The libpng in later versions is not what the version of - # libpixman we build below wants - it wants libpng15. - # - if [ ! -f libpng-$PNG_VERSION-done ] ; then - install_libpng - fi - - # - # The libpixman versions that come with the X11s for Leopard, - # Snow Leopard, and Lion is too old to support Cairo's image - # surface backend feature (which requires pixman-1 >= 0.22.0). - # - # XXX - what about the one that comes with the latest version - # of Xquartz? - # - if [ ! -f pixman-$PIXMAN_VERSION-done ] ; then - install_libpixman - fi - - # - # And now Cairo itself. - # XXX - with the libxcb that comes with 10.6, - # - # xcb_discard_reply() is missing, and the build fails. - # - if [ ! -f cairo-$CAIRO_VERSION-done ] ; then - install_cairo - fi - fi - - if [ ! -f atk-$ATK_VERSION-done ] ; then - install_atk - fi - - if [ ! -f pango-$PANGO_VERSION-done ] ; then - install_pango - fi - - if [ "$GDK_PIXBUF_VERSION" -a ! -f gdk-pixbuf-$GDK_PIXBUF_VERSION-done ] ; then - install_gdk_pixbuf - fi - - if [ ! -f gtk+-$GTK_VERSION-done ] ; then - install_gtk - fi -fi - -# -# Now we have reached a point where we can build everything including -# the GUI (Wireshark), but not with any optional features such as -# SNMP OID resolution, some forms of decryption, Lua scripting, playback -# of audio, or GeoIP mapping of IP addresses. -# -# We now conditionally download optional libraries to support them; -# the default is to download them all. -# - -if [ "$LIBSMI_VERSION" -a ! -f libsmi-$LIBSMI_VERSION-done ] ; then - install_libsmi -fi - -if [ "$LIBGPG_ERROR_VERSION" -a ! -f libgpg-error-$LIBGPG_ERROR_VERSION-done ] ; then - install_libgpg_error -fi - -if [ "$LIBGCRYPT_VERSION" -a ! -f libgcrypt-$LIBGCRYPT_VERSION-done ] ; then - install_libgcrypt -fi - -if [ "$GNUTLS_VERSION" -a ! -f gnutls-$GNUTLS_VERSION-done ] ; then - install_gnutls -fi - -if [ "$LUA_VERSION" -a ! -f lua-$LUA_VERSION-done ] ; then - install_lua -fi - -if [ "$PORTAUDIO_VERSION" -a ! -f portaudio-done ] ; then - install_portaudio -fi - -if [ "$GEOIP_VERSION" -a ! -f geoip-$GEOIP_VERSION-done ] -then - install_geoip -fi - -if [ "$CARES_VERSION" -a ! -f c-ares-$CARES_VERSION-done ] -then - install_c_ares -fi +install_all echo "" |