Test: Remove the Bash test scripts.

They've been replaced by the Python scripts.

Change-Id: I8add9c9ea0a6bdd68b2fa3841977863c0ea9a761
Reviewed-on: https://code.wireshark.org/review/27243
Reviewed-by: Anders Broman <a.broman58@gmail.com>

1 files changed, 0 insertions, 503 deletions

diff --git a/test/suite-capture.sh b/test/suite-capture.sh
deleted file mode 100755
index 36a15bc3cb..0000000000
--- a/test/suite-capture.sh
+++ /dev/null
@@ -1,503 +0,0 @@
-#!/bin/bash
-#
-# Test the capture engine of the Wireshark tools
-#
-# Wireshark - Network traffic analyzer
-# By Gerald Combs <gerald@wireshark.org>
-# Copyright 2005 Ulf Lamping
-#
-# SPDX-License-Identifier: GPL-2.0-or-later
-#
-
-
-# common exit status values
-EXIT_OK=0
-EXIT_COMMAND_LINE=1
-EXIT_ERROR=2
-
-WIRESHARK_CMD="$WIRESHARK -o gui.update.enabled:FALSE -k"
-
-PING_PID=
-
-capture_test_output_print() {
-	wait
-	for f in "$@"; do
-		if [[ -f "$f" ]]; then
-			printf " --> $f\n"
-			cat "$f"
-			printf "\n"
-		fi
-	done
-}
-
-capture_test_output_capinfos() {
-	wait
-	for f in "$@"; do
-		if [[ -f "$f" ]]; then
-			$CAPINFOS "$f"
-		else
-			printf "$f not found.\n"
-		fi
-	done
-}
-
-traffic_gen_ping() {
-	# Generate some traffic for quiet networks.
-	# The following will run in the background and return immediately
-	{
-	date
-	for sweep_size in {1..240} # try to number the packets
-	do
-		# How does ping _not_ have a standard set of arguments?
-		case $WS_SYSTEM in
-			Windows)
-				ping -n 1 -l $sweep_size www.wireshark.org	;;
-			SunOS)
-				/usr/sbin/ping www.wireshark.org $sweep_size 1		;;
-			*) # *BSD, Linux
-				ping -c 1 -s $sweep_size www.wireshark.org	;;
-		esac
-		sleep 0.25 # 240 * 0.25 = 60-ish seconds
-	done
-	date
-	} > ./testout_ping.txt 2>&1 &
-	PING_PID=$!
-}
-
-ping_cleanup() {
-	if [ -n "$PING_PID" ] ; then
-		kill $PING_PID
-		PING_PID=
-	fi
-	wait 2> /dev/null
-	rm -f ./testout_ping.txt
-}
-
-# capture exactly 10 packets
-capture_step_10packets() {
-	if [ $SKIP_CAPTURE -ne 0 ] ; then
-		test_step_skipped
-		return
-	fi
-
-	traffic_gen_ping
-
-	date > ./testout.txt
-	$DUT -i $TRAFFIC_CAPTURE_IFACE $TRAFFIC_CAPTURE_PROMISC \
-		-w ./testout.pcap \
-		-c 10 \
-		-a duration:$TRAFFIC_CAPTURE_DURATION \
-		-f "icmp || icmp6" \
-		>> ./testout.txt 2>&1
-	RETURNVALUE=$?
-	date >> ./testout.txt
-	if [ ! $RETURNVALUE -eq $EXIT_OK ]; then
-		echo
-		capture_test_output_print ./testout.txt
-		# part of the Prerequisite checks
-		# wrong interface ? output the possible interfaces
-		$TSHARK -D
-		test_step_failed "exit status of $DUT: $RETURNVALUE"
-		return
-	fi
-
-	# we should have an output file now
-	if [ ! -f "./testout.pcap" ]; then
-		capture_test_output_print ./testout.txt
-		test_step_failed "No output file!"
-		return
-	fi
-
-	# ok, we got a capture file, does it contain exactly 10 packets?
-	$CAPINFOS ./testout.pcap > ./testout2.txt
-	grep -Ei 'Number of packets:[[:blank:]]+10' ./testout2.txt > /dev/null
-	if [ $? -eq 0 ]; then
-		test_step_ok
-	else
-		echo
-		$TSHARK -ta -r ./testout.pcap >> ./testout2.txt
-		capture_test_output_print ./testout_ping.txt ./testout.txt ./testout2.txt
-		# part of the Prerequisite checks
-		# probably wrong interface, output the possible interfaces
-		$TSHARK -D
-		test_step_failed "No or not enough traffic captured. Probably the wrong interface: $TRAFFIC_CAPTURE_IFACE!"
-	fi
-}
-
-# capture exactly 10 packets using "-w -" (piping to stdout)
-capture_step_10packets_stdout() {
-	if [ $SKIP_CAPTURE -ne 0 ] ; then
-		test_step_skipped
-		return
-	fi
-
-	traffic_gen_ping
-
-	date > ./testout.txt
-	$DUT -i $TRAFFIC_CAPTURE_IFACE $TRAFFIC_CAPTURE_PROMISC \
-		-c 10 \
-		-a duration:$TRAFFIC_CAPTURE_DURATION \
-		-w - \
-		-f "icmp || icmp6" \
-		> ./testout.pcap 2>>./testout.txt
-	RETURNVALUE=$?
-	date >> ./testout.txt
-	if [ ! $RETURNVALUE -eq $EXIT_OK ]; then
-		echo
-		capture_test_output_print ./testout.txt
-		$TSHARK -D
-		test_step_failed "exit status of $DUT: $RETURNVALUE"
-		return
-	fi
-
-	# we should have an output file now
-	if [ ! -f "./testout.pcap" ]; then
-		test_step_failed "No output file!"
-		return
-	fi
-
-	# ok, we got a capture file, does it contain exactly 10 packets?
-	$CAPINFOS ./testout.pcap > ./testout2.txt 2>&1
-	grep -Ei 'Number of packets:[[:blank:]]+10' ./testout2.txt > /dev/null
-	if [ $? -eq 0 ]; then
-		test_step_ok
-	else
-		echo
-		capture_test_output_print ./testout.txt ./testout2.txt
-		$TSHARK -D
-		test_step_failed "No or not enough traffic captured. Probably the wrong interface: $TRAFFIC_CAPTURE_IFACE!"
-	fi
-}
-
-# capture packets via a fifo
-capture_step_fifo() {
-	mkfifo 'fifo'
-	(cat "${CAPTURE_DIR}dhcp.pcap"; sleep 1; tail -c +25 "${CAPTURE_DIR}dhcp.pcap") > fifo &
-	$DUT -i fifo $TRAFFIC_CAPTURE_PROMISC \
-		-w ./testout.pcap \
-		-a duration:$TRAFFIC_CAPTURE_DURATION \
-		> ./testout.txt 2>&1
-	RETURNVALUE=$?
-	rm 'fifo'
-	if [ ! $RETURNVALUE -eq $EXIT_OK ]; then
-		capture_test_output_print ./testout.txt
-		test_step_failed "exit status of $DUT: $RETURNVALUE"
-		return
-	fi
-
-	# we should have an output file now
-	if [ ! -f "./testout.pcap" ]; then
-		test_step_failed "No output file!"
-		return
-	fi
-
-	# ok, we got a capture file, does it contain exactly 8 packets?
-	$CAPINFOS ./testout.pcap > ./testout.txt
-	grep -Ei 'Number of packets:[[:blank:]]+8' ./testout.txt > /dev/null
-	if [ $? -eq 0 ]; then
-		test_step_ok
-	else
-		echo
-		capture_test_output_print ./testout.txt
-		test_step_failed "No or not enough traffic captured."
-	fi
-}
-
-# capture packets via a fifo
-capture_step_stdin() {
-	CONSOLE_LOG_ARGS=""
-	if [[ "$DUT" == "$WIRESHARK_CMD" && "$WS_SYSTEM" == "Windows" ]] ; then
-		CONSOLE_LOG_ARGS="-o console.log.level:127"
-	fi
-
-	(cat "${CAPTURE_DIR}dhcp.pcap"; sleep 1; tail -c +25 "${CAPTURE_DIR}dhcp.pcap") | \
-	$DUT -i - $TRAFFIC_CAPTURE_PROMISC \
-		-w ./testout.pcap \
-		-a duration:$TRAFFIC_CAPTURE_DURATION \
-		$CONSOLE_LOG_ARGS \
-		> ./testout.txt 2> ./testerr.txt
-	RETURNVALUE=$?
-	if [ ! $RETURNVALUE -eq $EXIT_OK ]; then
-		capture_test_output_print ./testout.txt ./testerr.txt ./dumpcap_debug_log.tmp
-		capture_test_output_capinfos ./testout.pcap
-		test_step_failed "Exit status of $DUT: $RETURNVALUE"
-		return
-	fi
-
-	if [ -n "$CONSOLE_LOG_ARGS" ] ; then
-		grep "Wireshark is up and ready to go" ./testout.txt > /dev/null 2>&1
-		if [ $? -ne 0 ]; then
-			test_step_failed "No startup message!"
-		fi
-
-		grep "Capture started" ./testerr.txt > /dev/null 2>&1
-		if [ $? -ne 0 ]; then
-			test_step_failed "No capture started message!"
-		fi
-
-		grep "Capture stopped" ./testerr.txt > /dev/null 2>&1
-		if [ $? -ne 0 ]; then
-			test_step_failed "No capture stopped message!"
-		fi
-	fi
-
-	# we should have an output file now
-	if [ ! -f "./testout.pcap" ]; then
-		test_step_failed "No output file!"
-		return
-	fi
-
-	# ok, we got a capture file, does it contain exactly 8 packets?
-	$CAPINFOS ./testout.pcap > ./testout.txt
-	grep -Ei 'Number of packets:[[:blank:]]+8' ./testout.txt > /dev/null
-	if [ $? -eq 0 ]; then
-		test_step_ok
-	else
-		echo
-		capture_test_output_print ./testout.txt
-		test_step_failed "No or not enough traffic captured."
-	fi
-}
-
-# capture exactly 2 times 10 packets (multiple files)
-capture_step_2multi_10packets() {
-	if [ $SKIP_CAPTURE -ne 0 ] ; then
-		test_step_skipped
-		return
-	fi
-
-	traffic_gen_ping
-
-	date > ./testout.txt
-	$DUT -i $TRAFFIC_CAPTURE_IFACE $TRAFFIC_CAPTURE_PROMISC \
-		-w ./testout.pcap \
-		-c 10 \
-		-a duration:$TRAFFIC_CAPTURE_DURATION \
-		-f "icmp || icmp6" \
-		>> ./testout.txt 2>&1
-
-	RETURNVALUE=$?
-	date >> ./testout.txt
-	if [ ! $RETURNVALUE -eq $EXIT_OK ]; then
-		echo
-		capture_test_output_print ./testout.txt
-		# part of the Prerequisite checks
-		# probably wrong interface, output the possible interfaces
-		$TSHARK -D
-		test_step_failed "exit status of $DUT: $RETURNVALUE"
-		return
-	fi
-
-	# we should have an output file now
-	if [ ! -f "./testout.pcap" ]; then
-		test_step_failed "No output file!"
-		return
-	fi
-
-	# ok, we got a capture file, does it contain exactly 10 packets?
-	$CAPINFOS ./testout.pcap > ./testout.txt
-	grep -Ei 'Number of packets:[[:blank:]]+10' ./testout.txt > /dev/null
-	if [ $? -eq 0 ]; then
-		test_step_ok
-	else
-		echo
-		capture_test_output_print ./testout.txt
-		test_step_failed "Probably the wrong interface (no traffic captured)!"
-	fi
-}
-
-# capture with a very unlikely read filter, packets must be zero afterwards
-capture_step_read_filter() {
-	if [ $SKIP_CAPTURE -ne 0 ] ; then
-		test_step_skipped
-		return
-	fi
-
-	traffic_gen_ping
-
-	# valid, but very unlikely filter
-	date > ./testout.txt
-	$DUT -i $TRAFFIC_CAPTURE_IFACE $TRAFFIC_CAPTURE_PROMISC \
-		-w ./testout.pcap \
-		-a duration:$TRAFFIC_CAPTURE_DURATION \
-		-2 -R 'dcerpc.cn_call_id==123456' \
-		-c 10 \
-		-f "icmp || icmp6" \
-		>> ./testout.txt 2>&1
-	RETURNVALUE=$?
-	date >> ./testout.txt
-	if [ ! $RETURNVALUE -eq $EXIT_OK ]; then
-		echo
-		capture_test_output_print ./testout.txt
-		# part of the Prerequisite checks
-		# wrong interface ? output the possible interfaces
-		$TSHARK -D
-		test_step_failed "exit status: $RETURNVALUE"
-		return
-	fi
-
-	# we should have an output file now
-	if [ ! -f "./testout.pcap" ]; then
-		test_step_failed "No output file!"
-		return
-	fi
-
-	# ok, we got a capture file, does it contain exactly 0 packets?
-	$CAPINFOS ./testout.pcap > ./testout.txt
-	grep -Ei 'Number of packets:[[:blank:]]+0' ./testout.txt > /dev/null
-	if [ $? -eq 0 ]; then
-		test_step_ok
-	else
-		echo
-		capture_test_output_print ./testout.txt
-		test_step_failed "Capture file should contain zero packets!"
-	fi
-}
-
-
-# capture with a snapshot length
-capture_step_snapshot() {
-	if [ $SKIP_CAPTURE -ne 0 ] ; then
-		test_step_skipped
-		return
-	fi
-
-	traffic_gen_ping
-
-	# capture with a snapshot length of 68 bytes for $TRAFFIC_CAPTURE_DURATION seconds
-	# this should result in no packets greater than 68 bytes
-	date > ./testout.txt
-	$DUT -i $TRAFFIC_CAPTURE_IFACE $TRAFFIC_CAPTURE_PROMISC \
-		-w ./testout.pcap \
-		-s 68 \
-		-a duration:$TRAFFIC_CAPTURE_DURATION \
-		-f "icmp || icmp6" \
-		>> ./testout.txt 2>&1
-	RETURNVALUE=$?
-	date >> ./testout.txt
-	if [ ! $RETURNVALUE -eq $EXIT_OK ]; then
-		echo
-		capture_test_output_print ./testout.txt
-		# part of the Prerequisite checks
-		# wrong interface ? output the possible interfaces
-		$TSHARK -D
-		test_step_failed "exit status: $RETURNVALUE"
-		return
-	fi
-
-	# we should have an output file now
-	if [ ! -f "./testout.pcap" ]; then
-		test_step_failed "No output file!"
-		return
-	fi
-
-	# use tshark to filter out all packets, which are larger than 68 bytes
-	$TSHARK -r ./testout.pcap -w ./testout2.pcap -Y 'frame.cap_len>68' > ./testout.txt 2>&1
-	if [ $? -ne 0 ]; then
-		echo
-		capture_test_output_print ./testout.txt
-		test_step_failed "Problem running TShark!"
-		return
-	fi
-
-	# ok, we got a capture file, does it contain exactly 0 packets?
-	$CAPINFOS ./testout2.pcap > ./testout.txt
-	grep -Ei 'Number of packets:[[:blank:]]+0' ./testout.txt > /dev/null
-	if [ $? -eq 0 ]; then
-		test_step_ok
-	else
-		echo
-		capture_test_output_print ./testout.txt
-		test_step_failed "Capture file should contain zero packets!"
-		return
-	fi
-}
-
-wireshark_capture_suite() {
-	# k: start capture immediately
-	# WIRESHARK_QUIT_AFTER_CAPTURE needs to be set.
-
-	#
-	# NOTE: This may not do the right thing if we use toolkits
-	# that use Wayland or Mir directly, unless they also depend
-	# on the DISPLAY environment variable.
-	#
-	#if [[ $WS_SYSTEM != Windows && $WS_SYSTEM != Darwin ]] && [ -z "$DISPLAY" ]; then
-
-	# Qt requires XKEYBOARD and Xrender, which our buildbots don't provide
-	if [[ $WS_SYSTEM != "Windows" && $WS_SYSTEM != "Darwin" ]]; then
-		echo -n " (assuming Xvnc, which doesn't support Xrender)"
-		test_step_skipped
-		return
-	fi
-
-	DUT="$WIRESHARK_CMD"
-	test_step_add "Capture 10 packets" capture_step_10packets
-	# piping to stdout doesn't work with Wireshark and capturing!
-	#test_step_add "Capture 10 packets using stdout: -w -" capture_step_10packets_stdout
-	if [ $TEST_FIFO ]; then
-		test_step_add "Capture via fifo" capture_step_fifo
-	fi
-	test_step_add "Capture via stdin" capture_step_stdin
-	# read filter doesn't work with Wireshark and capturing!
-	#test_step_add "Capture read filter (${TRAFFIC_CAPTURE_DURATION}s)" capture_step_read_filter
-	test_step_add "Capture snapshot length 68 bytes (${TRAFFIC_CAPTURE_DURATION}s)" capture_step_snapshot
-}
-
-tshark_capture_suite() {
-	DUT=$TSHARK
-	test_step_add "Capture 10 packets" capture_step_10packets
-	test_step_add "Capture 10 packets using stdout: -w -" capture_step_10packets_stdout
-	if [ $TEST_FIFO ]; then
-		test_step_add "Capture via fifo" capture_step_fifo
-	fi
-	test_step_add "Capture via stdin" capture_step_stdin
-	# tshark now using dumpcap for capturing, read filters won't work by definition
-	#test_step_add "Capture read filter (${TRAFFIC_CAPTURE_DURATION}s)" capture_step_read_filter
-	test_step_add "Capture snapshot length 68 bytes (${TRAFFIC_CAPTURE_DURATION}s)" capture_step_snapshot
-}
-
-dumpcap_capture_suite() {
-	#DUT="$DUMPCAP -Q"
-	DUT=$DUMPCAP
-	test_step_add "Capture 10 packets" capture_step_10packets
-	test_step_add "Capture 10 packets using stdout: -w -" capture_step_10packets_stdout
-	if [ $TEST_FIFO ]; then
-		test_step_add "Capture via fifo" capture_step_fifo
-	fi
-	test_step_add "Capture via stdin" capture_step_stdin
-	# read (display) filters intentionally doesn't work with dumpcap!
-	#test_step_add "Capture read filter (${TRAFFIC_CAPTURE_DURATION}s)" capture_step_read_filter
-	test_step_add "Capture snapshot length 68 bytes (${TRAFFIC_CAPTURE_DURATION}s)" capture_step_snapshot
-}
-
-capture_cleanup_step() {
-	ping_cleanup
-	rm -f ./testout.txt
-	rm -f ./testerr.txt
-	rm -f ./testout2.txt
-	rm -f ./testout.pcap
-	rm -f ./testout2.pcap
-}
-
-capture_suite() {
-	test_step_set_pre capture_cleanup_step
-	test_step_set_post capture_cleanup_step
-	test_remark_add "Capture - need some traffic on interface: \"$TRAFFIC_CAPTURE_IFACE\""
-	test_suite_add "Dumpcap capture" dumpcap_capture_suite
-	test_suite_add "TShark capture" tshark_capture_suite
-	test_suite_add "Wireshark capture" wireshark_capture_suite
-}
-
-#
-# Editor modelines  -  http://www.wireshark.org/tools/modelines.html
-#
-# Local variables:
-# sh-basic-offset: 8
-# tab-width: 8
-# indent-tabs-mode: t
-# End:
-#
-# vi: set shiftwidth=8 tabstop=8 noexpandtab:
-# :indentSize=8:tabSize=8:noTabs=false:
-#