gryphon(.h): fix indent (use 4 spaces)

Change-Id: Ic3ba745e22b5c28ffb8dd9d7fe513c4d86f3d603
Reviewed-on: https://code.wireshark.org/review/26360
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>

1 files changed, 324 insertions, 324 deletions

diff --git a/plugins/epan/gryphon/packet-gryphon.h b/plugins/epan/gryphon/packet-gryphon.h
index 07f0ea4d6d..f1cd456740 100644
--- a/plugins/epan/gryphon/packet-gryphon.h
+++ b/plugins/epan/gryphon/packet-gryphon.h
@@ -15,24 +15,24 @@
  * SPDX-License-Identifier: GPL-2.0-or-later
  */
 
-#define MSG_HDR_SZ  	    8
-#define CMD_HDR_SZ  	    4
+#define MSG_HDR_SZ          8
+#define CMD_HDR_SZ          4
 
 /* source/destinations: */
 
-#define	SD_CARD			0x01	/* (vehicle) network interface */
-#define SD_SERVER		0x02
-#define SD_CLIENT		0x03
-#define SD_KNOWN    	    	0x10	/* Client ID >= are well known */
-#define SD_SCHED		0x10	/* scheduler */
-#define SD_SCRIPT		0x20	/* script processor */
-#define SD_PGM     	    	0x21	/* Program loader */
-#define SD_USDT     	    	0x22	/* USDT (Unacknowledged Segmented Data Transfer) */
-#define SD_BLM	    	    	0x23	/* Bus Load Monitoring */
-#define SD_LIN	    	    	0x24	/* LIN extensions */
-#define SD_FLIGHT   	    	0x25	/* Flight Recorder */
-#define SD_LOGGER   	    	0x25	/* data logger */
-#define SD_RESP     	    	0x26	/* Message Response */
+#define SD_CARD                 0x01    /* (vehicle) network interface */
+#define SD_SERVER               0x02
+#define SD_CLIENT               0x03
+#define SD_KNOWN                0x10    /* Client ID >= are well known */
+#define SD_SCHED                0x10    /* scheduler */
+#define SD_SCRIPT               0x20    /* script processor */
+#define SD_PGM                  0x21    /* Program loader */
+#define SD_USDT                 0x22    /* USDT (Unacknowledged Segmented Data Transfer) */
+#define SD_BLM                  0x23    /* Bus Load Monitoring */
+#define SD_LIN                  0x24    /* LIN extensions */
+#define SD_FLIGHT               0x25    /* Flight Recorder */
+#define SD_LOGGER               0x25    /* data logger */
+#define SD_RESP                 0x26    /* Message Response */
 #define SD_IOPWR                0x27    /* VNG / Compact Gryphon I/O & power */
 #define SD_UTIL                 0x28    /* Miscellaneous utility commands   */
 #define SD_CNVT                 0x29    /* signal conversion commands */
@@ -41,151 +41,151 @@
 
 
 /* frame types: */
-#define GY_FT_CMD	    0x01    /* command to initiate some action */
-#define GY_FT_RESP	    0x02    /* response to a command */
-#define GY_FT_DATA	    0x03    /* (vehicle) network data */
-#define GY_FT_EVENT	    0x04    /* notification of an event */
-#define GY_FT_MISC	    0x05    /* misc data */
-#define GY_FT_TEXT	    0x06    /* null-terminated ASCII strings */
-#define GY_FT_SIG	    0x07    /* (vehicle) network signals */
+#define GY_FT_CMD               0x01    /* command to initiate some action */
+#define GY_FT_RESP              0x02    /* response to a command */
+#define GY_FT_DATA              0x03    /* (vehicle) network data */
+#define GY_FT_EVENT             0x04    /* notification of an event */
+#define GY_FT_MISC              0x05    /* misc data */
+#define GY_FT_TEXT              0x06    /* null-terminated ASCII strings */
+#define GY_FT_SIG               0x07    /* (vehicle) network signals */
 
 
 
 /* generic (all SD type) commands: values 0x00 to 0x3f */
 
-#define CMD_INIT		0x01	/* initialize target */
-#define CMD_GET_STAT		0x02	/* request status */
-#define CMD_GET_CONFIG		0x03	/* request configuration info */
-#define CMD_EVENT_ENABLE	0x04	/* Enable event type */
-#define CMD_EVENT_DISABLE	0x05	/* Disable event type */
-#define CMD_GET_TIME		0x06	/* Get current value of timestamp */
-#define CMD_GET_RXDROP		0x07	/* Get count of Rx msgs dropped */
-#define CMD_RESET_RXDROP	0x08	/* Set count of Rx msgs dropped to zero */
-#define CMD_BCAST_ON		0x09	/* broadcasts on */
-#define CMD_BCAST_OFF		0x0a	/* broadcasts off */
-#define CMD_SET_TIME		0x0b	/* set time */
-
-/* SD-type specific commands: should start at 0x40, global uniqueness	*/
-/* is prefered, but not mandatory.					*/
+#define CMD_INIT                0x01    /* initialize target */
+#define CMD_GET_STAT            0x02    /* request status */
+#define CMD_GET_CONFIG          0x03    /* request configuration info */
+#define CMD_EVENT_ENABLE        0x04    /* Enable event type */
+#define CMD_EVENT_DISABLE       0x05    /* Disable event type */
+#define CMD_GET_TIME            0x06    /* Get current value of timestamp */
+#define CMD_GET_RXDROP          0x07    /* Get count of Rx msgs dropped */
+#define CMD_RESET_RXDROP        0x08    /* Set count of Rx msgs dropped to zero */
+#define CMD_BCAST_ON            0x09    /* broadcasts on */
+#define CMD_BCAST_OFF           0x0a    /* broadcasts off */
+#define CMD_SET_TIME            0x0b    /* set time */
+
+/* SD-type specific commands: should start at 0x40, global uniqueness  */
+/* is prefered, but not mandatory. */
 
 /* SD_CARD command types: */
 
-#define	CMD_CARD_SET_SPEED	(SD_CARD * 256 + 0x40)	/* set peripheral speed */
-#define	CMD_CARD_GET_SPEED	(SD_CARD * 256 + 0x41)	/* get peripheral speed */
-#define	CMD_CARD_SET_FILTER	(SD_CARD * 256 + 0x42)	/* set filter to pass or block all */
-#define CMD_CARD_GET_FILTER	(SD_CARD * 256 + 0x43)	/* get a pass/block filter */
-#define	CMD_CARD_TX		(SD_CARD * 256 + 0x44)	/* transmit message */
-#define	CMD_CARD_TX_LOOP_ON	(SD_CARD * 256 + 0x45)	/* set transmit loopback on */
-#define	CMD_CARD_TX_LOOP_OFF	(SD_CARD * 256 + 0x46)	/* set transmit loopback off */
-#define	CMD_CARD_IOCTL		(SD_CARD * 256 + 0x47)	/* device driver ioctl pass-through */
-#define	CMD_CARD_ADD_FILTER	(SD_CARD * 256 + 0x48)	/* add a pass/block filter */
-#define	CMD_CARD_MODIFY_FILTER	(SD_CARD * 256 + 0x49)	/* modify a pass/block filter */
-#define	CMD_CARD_GET_FILTER_HANDLES (SD_CARD * 256 + 0x4A)/* get a list of filters */
-#define	CMD_CARD_SET_DEFAULT_FILTER (SD_CARD * 256 + 0x4B)/* set the default action */
-#define	CMD_CARD_GET_DEFAULT_FILTER (SD_CARD * 256 + 0x4C)/* get the defautl action */
-#define	CMD_CARD_SET_FILTER_MODE (SD_CARD * 256 + 0x4D)	/* set the client data mode */
-#define	CMD_CARD_GET_FILTER_MODE (SD_CARD * 256 + 0x4E)	/* get the client data mode */
-#define CMD_CARD_GET_EVNAMES     (SD_CARD * 256 + 0x4f)  /* get event names */
-#define CMD_CARD_GET_SPEEDS	 (SD_CARD * 256 + 0x50)	/* get speed definitions */
+#define CMD_CARD_SET_SPEED      (SD_CARD * 256 + 0x40)    /* set peripheral speed */
+#define CMD_CARD_GET_SPEED      (SD_CARD * 256 + 0x41)    /* get peripheral speed */
+#define CMD_CARD_SET_FILTER     (SD_CARD * 256 + 0x42)    /* set filter to pass or block all */
+#define CMD_CARD_GET_FILTER     (SD_CARD * 256 + 0x43)    /* get a pass/block filter */
+#define CMD_CARD_TX             (SD_CARD * 256 + 0x44)    /* transmit message */
+#define CMD_CARD_TX_LOOP_ON     (SD_CARD * 256 + 0x45)    /* set transmit loopback on */
+#define CMD_CARD_TX_LOOP_OFF    (SD_CARD * 256 + 0x46)    /* set transmit loopback off */
+#define CMD_CARD_IOCTL          (SD_CARD * 256 + 0x47)    /* device driver ioctl pass-through */
+#define CMD_CARD_ADD_FILTER     (SD_CARD * 256 + 0x48)    /* add a pass/block filter */
+#define CMD_CARD_MODIFY_FILTER  (SD_CARD * 256 + 0x49)    /* modify a pass/block filter */
+#define CMD_CARD_GET_FILTER_HANDLES (SD_CARD * 256 + 0x4A)/* get a list of filters */
+#define CMD_CARD_SET_DEFAULT_FILTER (SD_CARD * 256 + 0x4B)/* set the default action */
+#define CMD_CARD_GET_DEFAULT_FILTER (SD_CARD * 256 + 0x4C)/* get the defautl action */
+#define CMD_CARD_SET_FILTER_MODE (SD_CARD * 256 + 0x4D)   /* set the client data mode */
+#define CMD_CARD_GET_FILTER_MODE (SD_CARD * 256 + 0x4E)   /* get the client data mode */
+#define CMD_CARD_GET_EVNAMES    (SD_CARD * 256 + 0x4f)    /* get event names */
+#define CMD_CARD_GET_SPEEDS     (SD_CARD * 256 + 0x50)    /* get speed definitions */
 
 /* SD_SERVER command types: */
 
-#define CMD_SERVER_REG 		(SD_SERVER * 256 + 0x50)	/* register connection */
-#define CMD_SERVER_SET_SORT 	(SD_SERVER * 256 + 0x51)	/* set sorting behavior */
-#define CMD_SERVER_SET_OPT  	(SD_SERVER * 256 + 0x52)    	/* set type of optimization */
+#define CMD_SERVER_REG          (SD_SERVER * 256 + 0x50)    /* register connection */
+#define CMD_SERVER_SET_SORT     (SD_SERVER * 256 + 0x51)    /* set sorting behavior */
+#define CMD_SERVER_SET_OPT      (SD_SERVER * 256 + 0x52)    /* set type of optimization */
 
 /* SD_CLIENT command types: */
 
-#define CMD_CLIENT_GET_ID	(SD_CLIENT * 256 + 0x60)	/* get the ID (channel field) of this client? */
-#define CMD_CLIENT_SET_ID	(SD_CLIENT * 256 + 0x61)	/* set the ID (channel field) of this client? */
-#define CMD_CLIENT_SHUTDOWN	(SD_CLIENT * 256 + 0x62)	/* tell client to die ? */
+#define CMD_CLIENT_GET_ID       (SD_CLIENT * 256 + 0x60)    /* get the ID (channel field) of this client? */
+#define CMD_CLIENT_SET_ID       (SD_CLIENT * 256 + 0x61)    /* set the ID (channel field) of this client? */
+#define CMD_CLIENT_SHUTDOWN     (SD_CLIENT * 256 + 0x62)    /* tell client to die ? */
 
 /* Bus load monitor (SD_BLM) commands: */
 
-#define CMD_BLM_SET_MODE    	(SD_BLM * 256 + 0xA0)
-#define CMD_BLM_GET_MODE    	(SD_BLM * 256 + 0xA1)
-#define CMD_BLM_GET_DATA    	(SD_BLM * 256 + 0xA2)
-#define CMD_BLM_GET_STATS   	(SD_BLM * 256 + 0xA3)
+#define CMD_BLM_SET_MODE        (SD_BLM * 256 + 0xA0)
+#define CMD_BLM_GET_MODE        (SD_BLM * 256 + 0xA1)
+#define CMD_BLM_GET_DATA        (SD_BLM * 256 + 0xA2)
+#define CMD_BLM_GET_STATS       (SD_BLM * 256 + 0xA3)
 
 /* SD_LIN command types: */
-#define CMD_LDF_DESC                (SD_LIN * 256 + 0xB8) /* */
-#define CMD_LDF_UPLOAD              (SD_LIN * 256 + 0xB9) /* */
-#define CMD_LDF_LIST                (SD_LIN * 256 + 0xBA) /* */
-#define CMD_LDF_DELETE              (SD_LIN * 256 + 0xBB) /* */
-#define CMD_LDF_PARSE               (SD_LIN * 256 + 0xBC) /* */
-#define CMD_GET_LDF_INFO            (SD_LIN * 256 + 0xBD) /* */
-#define CMD_GET_NODE_NAMES          (SD_LIN * 256 + 0xBE) /* */
-#define CMD_EMULATE_NODES           (SD_LIN * 256 + 0xBF) /* */
-#define CMD_GET_FRAMES              (SD_LIN * 256 + 0xB0) /* */
-#define CMD_GET_FRAME_INFO          (SD_LIN * 256 + 0xC1) /* */
-#define CMD_GET_SIGNAL_INFO         (SD_LIN * 256 + 0xC2) /* */
-#define CMD_GET_SIGNAL_DETAIL       (SD_LIN * 256 + 0xC3) /* */
-#define CMD_GET_ENCODING_INFO       (SD_LIN * 256 + 0xC4) /* */
-#define CMD_GET_SCHEDULES           (SD_LIN * 256 + 0xC5) /* */
-#define CMD_START_SCHEDULE          (SD_LIN * 256 + 0xC6) /* */
-#define CMD_STOP_SCHEDULE           (SD_LIN * 256 + 0xC7) /* */
-#define CMD_STORE_DATA              (SD_LIN * 256 + 0xC8) /* */
-#define CMD_SEND_ID                 (SD_LIN * 256 + 0xC9) /* */
-#define CMD_SEND_ID_DATA            (SD_LIN * 256 + 0xCA) /* */
-#define CMD_SAVE_SESSION            (SD_LIN * 256 + 0xCB) /* */
-#define CMD_RESTORE_SESSION         (SD_LIN * 256 + 0xCC) /* */
-#define CMD_GET_NODE_SIGNALS        (SD_LIN * 256 + 0xCD) /* */
+#define CMD_LDF_DESC            (SD_LIN * 256 + 0xB8) /* */
+#define CMD_LDF_UPLOAD          (SD_LIN * 256 + 0xB9) /* */
+#define CMD_LDF_LIST            (SD_LIN * 256 + 0xBA) /* */
+#define CMD_LDF_DELETE          (SD_LIN * 256 + 0xBB) /* */
+#define CMD_LDF_PARSE           (SD_LIN * 256 + 0xBC) /* */
+#define CMD_GET_LDF_INFO        (SD_LIN * 256 + 0xBD) /* */
+#define CMD_GET_NODE_NAMES      (SD_LIN * 256 + 0xBE) /* */
+#define CMD_EMULATE_NODES       (SD_LIN * 256 + 0xBF) /* */
+#define CMD_GET_FRAMES          (SD_LIN * 256 + 0xB0) /* */
+#define CMD_GET_FRAME_INFO      (SD_LIN * 256 + 0xC1) /* */
+#define CMD_GET_SIGNAL_INFO     (SD_LIN * 256 + 0xC2) /* */
+#define CMD_GET_SIGNAL_DETAIL   (SD_LIN * 256 + 0xC3) /* */
+#define CMD_GET_ENCODING_INFO   (SD_LIN * 256 + 0xC4) /* */
+#define CMD_GET_SCHEDULES       (SD_LIN * 256 + 0xC5) /* */
+#define CMD_START_SCHEDULE      (SD_LIN * 256 + 0xC6) /* */
+#define CMD_STOP_SCHEDULE       (SD_LIN * 256 + 0xC7) /* */
+#define CMD_STORE_DATA          (SD_LIN * 256 + 0xC8) /* */
+#define CMD_SEND_ID             (SD_LIN * 256 + 0xC9) /* */
+#define CMD_SEND_ID_DATA        (SD_LIN * 256 + 0xCA) /* */
+#define CMD_SAVE_SESSION        (SD_LIN * 256 + 0xCB) /* */
+#define CMD_RESTORE_SESSION     (SD_LIN * 256 + 0xCC) /* */
+#define CMD_GET_NODE_SIGNALS    (SD_LIN * 256 + 0xCD) /* */
 
 /* signal conversion (SD_CNVT) commands */
 
-#define CMD_CNVT_GET_VALUES (SD_CNVT * 256 + 0x78) /* LIN Signal Conversion */
-#define CMD_CNVT_GET_UNITS  (SD_CNVT * 256 + 0x79) /* LIN Signal Conversion */
-#define CMD_CNVT_SET_VALUES (SD_CNVT * 256 + 0x7A) /* LIN Signal Conversion */
-#define CMD_CNVT_DESTROY_SESSION (SD_CNVT * 256 + 0x7B) /* LIN Signal Conversion */
-#define CMD_CNVT_SAVE_SESSION            (SD_CNVT * 256 + 0xCB) /* LIN Signal Conversion */
-#define CMD_CNVT_RESTORE_SESSION         (SD_CNVT * 256 + 0xCC) /* LIN Signal Conversion */
-#define CMD_CNVT_GET_NODE_SIGNALS        (SD_CNVT * 256 + 0xCD) /* LIN Signal Conversion */
+#define CMD_CNVT_GET_VALUES         (SD_CNVT * 256 + 0x78) /* LIN Signal Conversion */
+#define CMD_CNVT_GET_UNITS          (SD_CNVT * 256 + 0x79) /* LIN Signal Conversion */
+#define CMD_CNVT_SET_VALUES         (SD_CNVT * 256 + 0x7A) /* LIN Signal Conversion */
+#define CMD_CNVT_DESTROY_SESSION    (SD_CNVT * 256 + 0x7B) /* LIN Signal Conversion */
+#define CMD_CNVT_SAVE_SESSION       (SD_CNVT * 256 + 0xCB) /* LIN Signal Conversion */
+#define CMD_CNVT_RESTORE_SESSION    (SD_CNVT * 256 + 0xCC) /* LIN Signal Conversion */
+#define CMD_CNVT_GET_NODE_SIGNALS   (SD_CNVT * 256 + 0xCD) /* LIN Signal Conversion */
 
 /* Flight recorder (SD_FLIGHT) commands */
 
-#define CMD_FLIGHT_GET_CONFIG	(SD_FLIGHT * 256 + 0x50)	/* get flight recorder channel info */
-#define CMD_FLIGHT_START_MON	(SD_FLIGHT * 256 + 0x51)	/* start flight recorder monitoring */
-#define CMD_FLIGHT_STOP_MON 	(SD_FLIGHT * 256 + 0x52)	/* stop flight recorder monitoring */
+#define CMD_FLIGHT_GET_CONFIG   (SD_FLIGHT * 256 + 0x50)    /* get flight recorder channel info */
+#define CMD_FLIGHT_START_MON    (SD_FLIGHT * 256 + 0x51)    /* start flight recorder monitoring */
+#define CMD_FLIGHT_STOP_MON     (SD_FLIGHT * 256 + 0x52)    /* stop flight recorder monitoring */
 
 /* Message responder (SD_RESP) commands: */
-#define CMD_MSGRESP_ADD    	(SD_RESP * 256 + 0xB0)
-#define CMD_MSGRESP_GET    	(SD_RESP * 256 + 0xB1)
-#define CMD_MSGRESP_MODIFY    	(SD_RESP * 256 + 0xB2)
+#define CMD_MSGRESP_ADD         (SD_RESP * 256 + 0xB0)
+#define CMD_MSGRESP_GET         (SD_RESP * 256 + 0xB1)
+#define CMD_MSGRESP_MODIFY      (SD_RESP * 256 + 0xB2)
 #define CMD_MSGRESP_GET_HANDLES (SD_RESP * 256 + 0xB3)
 
 /* Program loader (SD_PGM) commands: */
 
-#define CMD_PGM_DESC	    	(SD_PGM * 256 + 0x90)	/* Describe a program to to uploaded */
-#define CMD_PGM_UPLOAD	    	(SD_PGM * 256 + 0x91)	/* Upload a program to the Gryphon */
-#define CMD_PGM_DELETE	    	(SD_PGM * 256 + 0x92)	/* Delete an uploaded program */
-#define CMD_PGM_LIST	    	(SD_PGM * 256 + 0x93)	/* Get a list of uploaded programs */
-#define CMD_PGM_START	    	(SD_PGM * 256 + 0x94)	/* Start an uploaded program */
-#define CMD_PGM_START2	    	(SD_CLIENT * 256 + 0x94)/* Start an uploaded program */
-#define CMD_PGM_STOP	    	(SD_PGM * 256 + 0x95)	/* Stop an uploaded program */
-#define CMD_PGM_STATUS	    	(SD_PGM * 256 + 0x96)	/* Get the status of an uploaded program */
-#define CMD_PGM_OPTIONS	    	(SD_PGM * 256 + 0x97)	/* Set the upload options */
-#define CMD_PGM_FILES	    	(SD_PGM * 256 + 0x98)	/* Get a list of files & directories */
+#define CMD_PGM_DESC            (SD_PGM * 256 + 0x90)    /* Describe a program to to uploaded */
+#define CMD_PGM_UPLOAD          (SD_PGM * 256 + 0x91)    /* Upload a program to the Gryphon */
+#define CMD_PGM_DELETE          (SD_PGM * 256 + 0x92)    /* Delete an uploaded program */
+#define CMD_PGM_LIST            (SD_PGM * 256 + 0x93)    /* Get a list of uploaded programs */
+#define CMD_PGM_START           (SD_PGM * 256 + 0x94)    /* Start an uploaded program */
+#define CMD_PGM_START2          (SD_CLIENT * 256 + 0x94) /* Start an uploaded program */
+#define CMD_PGM_STOP            (SD_PGM * 256 + 0x95)    /* Stop an uploaded program */
+#define CMD_PGM_STATUS          (SD_PGM * 256 + 0x96)    /* Get the status of an uploaded program */
+#define CMD_PGM_OPTIONS         (SD_PGM * 256 + 0x97)    /* Set the upload options */
+#define CMD_PGM_FILES           (SD_PGM * 256 + 0x98)    /* Get a list of files & directories */
 
 /* Scheduler (SD_SCHED) target commands: */
 
-#define CMD_SCHED_TX		(SD_SCHED * 256 + 0x70)	/* schedule transmission list */
-#define CMD_SCHED_KILL_TX	(SD_SCHED * 256 + 0x71)	/* stop and destroy job */
-#define CMD_SCHED_STOP_TX	(SD_SCHED * 256 + 0x71)	/* deprecated */
-#define CMD_SCHED_MSG_REPLACE   (SD_SCHED * 256 + 0x72) /* replace a scheduled message */
+#define CMD_SCHED_TX            (SD_SCHED * 256 + 0x70)    /* schedule transmission list */
+#define CMD_SCHED_KILL_TX       (SD_SCHED * 256 + 0x71)    /* stop and destroy job */
+#define CMD_SCHED_STOP_TX       (SD_SCHED * 256 + 0x71)    /* deprecated */
+#define CMD_SCHED_MSG_REPLACE   (SD_SCHED * 256 + 0x72)    /* replace a scheduled message */
 
 /* USDT (SD_USDT) target commands: */
 
-#define	CMD_USDT_IOCTL		(SD_USDT * 256 + 0x47)	/* Register/Unregister with USDT */
-#define	CMD_USDT_REGISTER	(SD_USDT * 256 + 0xB0)	/* Register/Unregister with USDT */
+#define CMD_USDT_IOCTL          (SD_USDT * 256 + 0x47)  /* Register/Unregister with USDT */
+#define CMD_USDT_REGISTER       (SD_USDT * 256 + 0xB0)  /* Register/Unregister with USDT */
 #define CMD_USDT_SET_FUNCTIONAL (SD_USDT * 256 + 0xB1)  /* Set to use extended addressing*/
 #define CMD_USDT_SET_STMIN_MULT (SD_USDT * 256 + 0xB2)  /* */
-#define CMD_USDT_SET_STMIN_FC (SD_USDT * 256 + 0xB3)  /* */
-#define CMD_USDT_GET_STMIN_FC (SD_USDT * 256 + 0xB4)  /* */
-#define CMD_USDT_SET_BSMAX_FC (SD_USDT * 256 + 0xB5)  /* */
-#define CMD_USDT_GET_BSMAX_FC (SD_USDT * 256 + 0xB6)  /* */
-#define	CMD_USDT_REGISTER_NON_LEGACY	(SD_USDT * 256 + 0xB7)	/* Register/Unregister with USDT */
-#define CMD_USDT_SET_STMIN_OVERRIDE (SD_USDT * 256 + 0xB8)  /* */
-#define CMD_USDT_GET_STMIN_OVERRIDE (SD_USDT * 256 + 0xB9)  /* */
+#define CMD_USDT_SET_STMIN_FC   (SD_USDT * 256 + 0xB3)  /* */
+#define CMD_USDT_GET_STMIN_FC   (SD_USDT * 256 + 0xB4)  /* */
+#define CMD_USDT_SET_BSMAX_FC   (SD_USDT * 256 + 0xB5)  /* */
+#define CMD_USDT_GET_BSMAX_FC   (SD_USDT * 256 + 0xB6)  /* */
+#define CMD_USDT_REGISTER_NON_LEGACY    (SD_USDT * 256 + 0xB7)    /* Register/Unregister with USDT */
+#define CMD_USDT_SET_STMIN_OVERRIDE     (SD_USDT * 256 + 0xB8)  /* */
+#define CMD_USDT_GET_STMIN_OVERRIDE     (SD_USDT * 256 + 0xB9)  /* */
 #define CMD_USDT_ACTIVATE_STMIN_OVERRIDE (SD_USDT * 256 + 0xBA)  /* */
 
 /* I/O Power (SD_IOPWR) target commands: */
@@ -206,64 +206,64 @@
 
 /* response frame (FT_RESP) response field definitions: */
 
-#define RESP_OK			0x00	/* no error */
-#define	RESP_UNKNOWN_ERR	0x01	/* unknown error */
-#define RESP_UNKNOWN_CMD	0x02	/* unrecognised command */
-#define RESP_UNSUPPORTED	0x03	/* unsupported command */
-#define RESP_INVAL_CHAN		0x04	/* invalid channel specified */
-#define RESP_INVAL_DST		0x05	/* invalid destination */
-#define RESP_INVAL_PARAM	0x06	/* invalid parameters */
-#define RESP_INVAL_MSG		0x07	/* invalid message */
-#define RESP_INVAL_LEN		0x08	/* invalid length field */
-#define RESP_TX_FAIL		0x09	/* transmit failed */
-#define RESP_RX_FAIL		0x0a	/* receive failed */
-#define RESP_AUTH_FAIL		0x0b
-#define RESP_MEM_ALLOC_ERR  	0x0c	/* memory allocation error */
-#define RESP_TIMEOUT	  	0x0d	/* command timed out */
-#define RESP_UNAVAILABLE	0x0e
-#define RESP_BUF_FULL		0x0f	/* buffer full */
-#define RESP_NO_SUCH_JOB	0x10
+#define RESP_OK                 0x00    /* no error */
+#define RESP_UNKNOWN_ERR        0x01    /* unknown error */
+#define RESP_UNKNOWN_CMD        0x02    /* unrecognised command */
+#define RESP_UNSUPPORTED        0x03    /* unsupported command */
+#define RESP_INVAL_CHAN         0x04    /* invalid channel specified */
+#define RESP_INVAL_DST          0x05    /* invalid destination */
+#define RESP_INVAL_PARAM        0x06    /* invalid parameters */
+#define RESP_INVAL_MSG          0x07    /* invalid message */
+#define RESP_INVAL_LEN          0x08    /* invalid length field */
+#define RESP_TX_FAIL            0x09    /* transmit failed */
+#define RESP_RX_FAIL            0x0a    /* receive failed */
+#define RESP_AUTH_FAIL          0x0b
+#define RESP_MEM_ALLOC_ERR      0x0c    /* memory allocation error */
+#define RESP_TIMEOUT            0x0d    /* command timed out */
+#define RESP_UNAVAILABLE        0x0e
+#define RESP_BUF_FULL           0x0f    /* buffer full */
+#define RESP_NO_SUCH_JOB        0x10
 
 /* Flight recorder (SD_FLIGHT) target definitions */
 
-#define FR_RESP_AFTER_EVENT    	    0
-#define FR_RESP_AFTER_PERIOD	    1
-#define FR_IGNORE_DURING_PER	    2
-#define FR_DEACT_AFTER_PER    	    0x80
-#define FR_DEACT_ON_EVENT     	    0x40
-#define FR_DELETE   	    	    0x20
-#define FR_PERIOD_MSGS 	    	    0x10
+#define FR_RESP_AFTER_EVENT         0
+#define FR_RESP_AFTER_PERIOD        1
+#define FR_IGNORE_DURING_PER        2
+#define FR_DEACT_AFTER_PER          0x80
+#define FR_DEACT_ON_EVENT           0x40
+#define FR_DELETE                   0x20
+#define FR_PERIOD_MSGS              0x10
 
 /* Filter data types */
 
-#define FILTER_DATA_TYPE_HEADER_FRAME	0x00
-#define FILTER_DATA_TYPE_HEADER     	0x01
-#define FILTER_DATA_TYPE_DATA	    	0x02
-#define FILTER_DATA_TYPE_EXTRA_DATA 	0x03
-#define FILTER_EVENT_TYPE_HEADER 	0x04
-#define FILTER_EVENT_TYPE_DATA 	    	0x05
+#define FILTER_DATA_TYPE_HEADER_FRAME   0x00
+#define FILTER_DATA_TYPE_HEADER         0x01
+#define FILTER_DATA_TYPE_DATA           0x02
+#define FILTER_DATA_TYPE_EXTRA_DATA     0x03
+#define FILTER_EVENT_TYPE_HEADER        0x04
+#define FILTER_EVENT_TYPE_DATA          0x05
 
 /* filter flags */
 
-#define FILTER_PASS_FLAG    	    0x01
-#define FILTER_ACTIVE_FLAG  	    0x02
+#define FILTER_PASS_FLAG            0x01
+#define FILTER_ACTIVE_FLAG          0x02
 
 /* Filter and Frame Responder Condition operators */
 
-#define BIT_FIELD_CHECK     	0
-#define SVALUE_GT    	    	1
-#define SVALUE_GE    	    	2
-#define SVALUE_LT    	    	3
-#define SVALUE_LE    	    	4
-#define VALUE_EQ    	    	5
-#define VALUE_NE    	    	6
-#define UVALUE_GT    	    	7
-#define UVALUE_GE    	    	8
-#define UVALUE_LT    	    	9
-#define UVALUE_LE    	    	10
-#define DIG_LOW_TO_HIGH     	11
-#define DIG_HIGH_TO_LOW     	12
-#define DIG_TRANSITION	    	13
+#define BIT_FIELD_CHECK         0
+#define SVALUE_GT               1
+#define SVALUE_GE               2
+#define SVALUE_LT               3
+#define SVALUE_LE               4
+#define VALUE_EQ                5
+#define VALUE_NE                6
+#define UVALUE_GT               7
+#define UVALUE_GE               8
+#define UVALUE_LT               9
+#define UVALUE_LE               10
+#define DIG_LOW_TO_HIGH         11
+#define DIG_HIGH_TO_LOW         12
+#define DIG_TRANSITION          13
 
 /* Modes available via CMD_CARD_SET_FILTERING_MODE */
 #define FILTER_OFF_PASS_ALL     3
@@ -271,130 +271,130 @@
 #define FILTER_ON               5
 
 /* Modes available via CMD_CARD_SET_DEFAULT_FILTER */
-#define DEFAULT_FILTER_BLOCK	0
-#define DEFAULT_FILTER_PASS 	1
+#define DEFAULT_FILTER_BLOCK    0
+#define DEFAULT_FILTER_PASS     1
 
 /* Actions available via CMD_CARD_MODIFY_FILTER */
-#define DELETE_FILTER       	0
-#define ACTIVATE_FILTER     	1
-#define DEACTIVATE_FILTER   	2
+#define DELETE_FILTER           0
+#define ACTIVATE_FILTER         1
+#define DEACTIVATE_FILTER       2
 
-/* Flags to modify how FT_CMD (command) messages are handled	    	*/
-/* These values are ORed with FT_CMD and stored in the Frame Header's	*/
-/* Frame Type field for each response. 	    	    	    	    	*/
-#define DONT_WAIT_FOR_RESP  	0x80
-#define WAIT_FOR_PREV_RESP  	0x40
-#define RESPONSE_FLAGS  	(DONT_WAIT_FOR_RESP | WAIT_FOR_PREV_RESP)
+/* Flags to modify how FT_CMD (command) messages are handled            */
+/* These values are ORed with FT_CMD and stored in the Frame Header's    */
+/* Frame Type field for each response.                                     */
+#define DONT_WAIT_FOR_RESP      0x80
+#define WAIT_FOR_PREV_RESP      0x40
+#define RESPONSE_FLAGS      (DONT_WAIT_FOR_RESP | WAIT_FOR_PREV_RESP)
 
 
 /* Program loader options */
-#define PGM_CONV    	    1 	    /* Type of data conversion to perform   */
-#define PGM_TYPE    	    2 	    /* Type of file			    */
-#define PGM_BIN     	    11 	    /* Binary, no conversion		    */
-#define PGM_ASCII   	    12 	    /* ASCII, convert CR LF to LF	    */
-#define PGM_PGM     	    21 	    /* Executable			    */
-#define PGM_DATA    	    22 	    /* Data				    */
+#define PGM_CONV            1         /* Type of data conversion to perform   */
+#define PGM_TYPE            2         /* Type of file                */
+#define PGM_BIN             11         /* Binary, no conversion            */
+#define PGM_ASCII           12         /* ASCII, convert CR LF to LF        */
+#define PGM_PGM             21         /* Executable                */
+#define PGM_DATA            22         /* Data                    */
 
 
 
 
 /* IOCTL definitions - comments indicate data size */
 
-#define GINIT		0x11100001
-#define GLOOPON		0x11100002
-#define GLOOPOFF	0x11100003
-#define GGETHWTYPE	0x11100004
-#define GGETREG		0x11100005
-#define GSETREG		0x11100006
-#define GGETRXCOUNT	0x11100007
-#define GSETRXCOUNT	0x11100008
-#define GGETTXCOUNT	0x11100009
-#define GSETTXCOUNT	0x1110000a
-#define GGETRXDROP	0x1110000b
-#define GSETRXDROP	0x1110000c
-#define GGETTXDROP	0x1110000d
-#define GSETTXDROP	0x1110000e
-#define GGETRXBAD	0x1110000f
-#define GGETTXBAD	0x11100011
-#define GGETCOUNTS	0x11100013
-#define GGETBLMON	0x11100014
-#define GSETBLMON	0x11100015
-#define GGETERRLEV	0x11100016
-#define GSETERRLEV	0x11100017
-#define GGETBITRATE	0x11100018
-#define GGETRAM		0x11100019
-#define GSETRAM		0x1110001a
-
-#define GCANGETBTRS	0x11200001
-#define GCANSETBTRS	0x11200002
-#define GCANGETBC	0x11200003
-#define GCANSETBC	0x11200004
-#define GCANGETMODE	0x11200005
-#define GCANSETMODE	0x11200006
-#define GCANGETTRANS	0x11200009
-#define GCANSETTRANS	0x1120000a
-#define GCANSENDERR	0x1120000b
-#define GCANRGETOBJ	0x11210001
-#define GCANRSETSTDID	0x11210002
-#define GCANRSETEXTID	0x11210003
-#define GCANRSETDATA	0x11210004
-#define GCANRENABLE	0x11210005
-#define GCANRDISABLE	0x11210006
-#define GCANRGETMASKS	0x11210007
-#define GCANRSETMASKS	0x11210008
-#define GCANSWGETMODE	0x11220001
-#define GCANSWSETMODE	0x11220002
-
-#define GDLCGETFOURX	0x11400001
-#define GDLCSETFOURX	0x11400002
-#define GDLCGETLOAD	0x11400003
-#define GDLCSETLOAD	0x11400004
-#define GDLCSENDBREAK	0x11400005
-#define GDLCABORTTX	0x11400006
-#define GDLCGETHDRMODE	0x11400007
-#define GDLCSETHDRMODE	0x11400008
-
-#define GHONSLEEP	0x11600001
-#define GHONSILENCE	0x11600002
-
-#define GKWPSETPTIMES	0x11700011
-#define GKWPSETWTIMES	0x11700010
-#define GKWPDOWAKEUP	0x11700008
-#define GKWPGETBITTIME	0x11700101
-#define GKWPSETBITTIME	0x11700102
-#define GKWPSETNODEADDR	0x11700104
-#define GKWPGETNODETYPE	0x11700105
-#define GKWPSETNODETYPE	0x11700106
-#define GKWPSETWAKETYPE	0x11700108
-#define GKWPSETTARGADDR	0x1170010a
-#define GKWPSETKEYBYTES	0x1170010c
-#define GKWPSETSTARTREQ	0x1170010e
-#define GKWPSETSTARTRESP	0x11700110
-#define GKWPSETPROTOCOL		0x11700112
-#define GKWPGETLASTKEYBYTES	0x11700201
-#define GKWPSETLASTKEYBYTES	0x11700202
-
-#define GSCPGETBBR	0x11300001
-#define GSCPSETBBR	0x11300002
-#define GSCPGETID	0x11300003
-#define GSCPSETID	0x11300004
+#define GINIT           0x11100001
+#define GLOOPON         0x11100002
+#define GLOOPOFF        0x11100003
+#define GGETHWTYPE      0x11100004
+#define GGETREG         0x11100005
+#define GSETREG         0x11100006
+#define GGETRXCOUNT     0x11100007
+#define GSETRXCOUNT     0x11100008
+#define GGETTXCOUNT     0x11100009
+#define GSETTXCOUNT     0x1110000a
+#define GGETRXDROP      0x1110000b
+#define GSETRXDROP      0x1110000c
+#define GGETTXDROP      0x1110000d
+#define GSETTXDROP      0x1110000e
+#define GGETRXBAD       0x1110000f
+#define GGETTXBAD       0x11100011
+#define GGETCOUNTS      0x11100013
+#define GGETBLMON       0x11100014
+#define GSETBLMON       0x11100015
+#define GGETERRLEV      0x11100016
+#define GSETERRLEV      0x11100017
+#define GGETBITRATE     0x11100018
+#define GGETRAM         0x11100019
+#define GSETRAM         0x1110001a
+
+#define GCANGETBTRS     0x11200001
+#define GCANSETBTRS     0x11200002
+#define GCANGETBC       0x11200003
+#define GCANSETBC       0x11200004
+#define GCANGETMODE     0x11200005
+#define GCANSETMODE     0x11200006
+#define GCANGETTRANS    0x11200009
+#define GCANSETTRANS    0x1120000a
+#define GCANSENDERR     0x1120000b
+#define GCANRGETOBJ     0x11210001
+#define GCANRSETSTDID   0x11210002
+#define GCANRSETEXTID   0x11210003
+#define GCANRSETDATA    0x11210004
+#define GCANRENABLE     0x11210005
+#define GCANRDISABLE    0x11210006
+#define GCANRGETMASKS   0x11210007
+#define GCANRSETMASKS   0x11210008
+#define GCANSWGETMODE   0x11220001
+#define GCANSWSETMODE   0x11220002
+
+#define GDLCGETFOURX    0x11400001
+#define GDLCSETFOURX    0x11400002
+#define GDLCGETLOAD     0x11400003
+#define GDLCSETLOAD     0x11400004
+#define GDLCSENDBREAK   0x11400005
+#define GDLCABORTTX     0x11400006
+#define GDLCGETHDRMODE  0x11400007
+#define GDLCSETHDRMODE  0x11400008
+
+#define GHONSLEEP       0x11600001
+#define GHONSILENCE     0x11600002
+
+#define GKWPSETPTIMES   0x11700011
+#define GKWPSETWTIMES   0x11700010
+#define GKWPDOWAKEUP    0x11700008
+#define GKWPGETBITTIME  0x11700101
+#define GKWPSETBITTIME  0x11700102
+#define GKWPSETNODEADDR 0x11700104
+#define GKWPGETNODETYPE 0x11700105
+#define GKWPSETNODETYPE 0x11700106
+#define GKWPSETWAKETYPE 0x11700108
+#define GKWPSETTARGADDR 0x1170010a
+#define GKWPSETKEYBYTES 0x1170010c
+#define GKWPSETSTARTREQ 0x1170010e
+#define GKWPSETSTARTRESP 0x11700110
+#define GKWPSETPROTOCOL 0x11700112
+#define GKWPGETLASTKEYBYTES 0x11700201
+#define GKWPSETLASTKEYBYTES 0x11700202
+
+#define GSCPGETBBR      0x11300001
+#define GSCPSETBBR      0x11300002
+#define GSCPGETID       0x11300003
+#define GSCPSETID       0x11300004
 #define GSCPADDFUNCID   0x11300005
 #define GSCPCLRFUNCID   0x11300006
 
-#define GUBPGETBITRATE          0x11800001
-#define GUBPSETBITRATE          0x11800002
-#define GUBPGETINTERBYTE        0x11800003
-#define GUBPSETINTERBYTE        0x11800004
-#define GUBPGETNACKMODE         0x11800005
-#define GUBPSETNACKMODE         0x11800006
-#define GUBPGETRETRYDELAY	0x11800007
-#define GUBPSETRETRYDELAY	0x11800008
+#define GUBPGETBITRATE      0x11800001
+#define GUBPSETBITRATE      0x11800002
+#define GUBPGETINTERBYTE    0x11800003
+#define GUBPSETINTERBYTE    0x11800004
+#define GUBPGETNACKMODE     0x11800005
+#define GUBPSETNACKMODE     0x11800006
+#define GUBPGETRETRYDELAY   0x11800007
+#define GUBPSETRETRYDELAY   0x11800008
 
-#define GRESETHC08              0x11800009
-#define GTESTHC08COP            0x1180000A
+#define GRESETHC08          0x11800009
+#define GTESTHC08COP        0x1180000A
 
-#define GSJAGETLISTEN	        0x11250001
-#define GSJASETLISTEN	        0x11250002
+#define GSJAGETLISTEN           0x11250001
+#define GSJASETLISTEN           0x11250002
 #define GSJAGETSELFTEST         0x11250003
 #define GSJASETSELFTEST         0x11250004
 #define GSJAGETXMITONCE         0x11250005
@@ -516,64 +516,64 @@
 #define GPWRGETWHICH            0x11520001
 #define GPWROFF                 0x11520002
 #define GPWROFFRESET            0x11520003
-#define GPWRRESET	        0x11520004
+#define GPWRRESET            0x11520004
 
 
 /* Hardware / driver TYPE and SUBTYPE definitions */
 
-#define GDUMMY		0x01	/* Dummy device driver TYPE */
-#define GDGDMARKONE	0x01		/* Dummy device driver SUBTYPE */
-
-#define GCAN		0x02	/* CAN TYPE */
-#define G82527		0x01		/* 82527 SUBTYPE */
-#define GSJA1000	0x02		/* SJA1000 SUBTYPE */
-#define G82527SW	0x03		/* 82527 single wire subtype */
-#define G82527ISO11992	0x04		/* 82527 ISO11992 subtype */
-#define G82527_SINGLECHAN   0x05	/* 82527 single channel */
-#define G82527SW_SINGLECHAN 0x06	/* 82527 single wire single channel */
-#define G82527ISO11992_SINGLECHAN   0x07 /* 82527 ISO11992 single channel */
-#define GSJA1000FT	0x10		/* SJA1000 Fault Tolerant subtype */
-#define GSJA1000C	0x11		/* SJA1000 Compact subtype */
-#define GSJA1000FT_FO   0x12            /* SJA1000 single chsnnel Fault Tolerant subtype */
-#define GSJA1000_BEACON_CANFD	0x1a		/* SJA1000 BEACON CAN-FD subtype */
-#define GSJA1000_BEACON_SW	0x1b		/* SJA1000 BEACON CAN single wire subtype */
-#define GSJA1000_BEACON_FT	0x1c		/* SJA1000 BEACON CAN Fault Tolerant subtype */
-
-#define GJ1850		0x03	/* 1850 TYPE */
-#define GHBCCPAIR	0x01		/* HBCC SUBTYPE */
-#define GDLC		0x02		/* GM DLC SUBTYPE */
-#define GCHRYSLER	0x03		/* Chrysler SUBTYPE */
-#define GDEHC12		0x04		/* DE HC12 KWP/BDLC SUBTYPE */
-
-#define GKWP2000	0x04	/* Keyword protocol 2000 TYPE */
-#define GDEHC12KWP	0x01		/* DE HC12 KWP/BDLC card SUBTYPE */
-
-#define GHONDA		0x05	/* Honda UART TYPE */
-#define GDGHC08		0x01		/* DG HC08 SUBTYPE */
-
-#define GFORDUBP	0x06	/* FORD UBP TYPE */
-#define GDGUBP08	0x01		/* DG HC08 SUBTYPE */
-
-#define GSCI		0x09	/* Chrysler SCI TYPE */
-#define G16550SCI	0x01		/* 16550 type UART based card SUBTYPE */
-
-#define GCCD		0x0a	/* Chrysler C2D TYPE */
-#define G16550CDP68HC68	0x01		/* 16550 / CDP68HC68S1 card SUBTYPE */
-
-#define GLIN    	0x0b	/* LIN TYPE */
-#define GDGLIN08	0x01		/* DG HC08 SUBTYPE */
-#define GDGLIN_BEACON	0x03		/* DG BEACON LIN SUBTYPE */
-
-#define MEMCPY(dest, src, size)     	    \
-    memcpy (dest, src, size);	    	    \
+#define GDUMMY          0x01    /* Dummy device driver TYPE */
+#define GDGDMARKONE     0x01    /* Dummy device driver SUBTYPE */
+
+#define GCAN            0x02    /* CAN TYPE */
+#define G82527          0x01    /* 82527 SUBTYPE */
+#define GSJA1000        0x02    /* SJA1000 SUBTYPE */
+#define G82527SW        0x03    /* 82527 single wire subtype */
+#define G82527ISO11992  0x04    /* 82527 ISO11992 subtype */
+#define G82527_SINGLECHAN 0x05  /* 82527 single channel */
+#define G82527SW_SINGLECHAN 0x06 /* 82527 single wire single channel */
+#define G82527ISO11992_SINGLECHAN 0x07 /* 82527 ISO11992 single channel */
+#define GSJA1000FT      0x10    /* SJA1000 Fault Tolerant subtype */
+#define GSJA1000C       0x11    /* SJA1000 Compact subtype */
+#define GSJA1000FT_FO   0x12    /* SJA1000 single chsnnel Fault Tolerant subtype */
+#define GSJA1000_BEACON_CANFD 0x1a /* SJA1000 BEACON CAN-FD subtype */
+#define GSJA1000_BEACON_SW    0x1b /* SJA1000 BEACON CAN single wire subtype */
+#define GSJA1000_BEACON_FT    0x1c /* SJA1000 BEACON CAN Fault Tolerant subtype */
+
+#define GJ1850          0x03    /* 1850 TYPE */
+#define GHBCCPAIR       0x01    /* HBCC SUBTYPE */
+#define GDLC            0x02    /* GM DLC SUBTYPE */
+#define GCHRYSLER       0x03    /* Chrysler SUBTYPE */
+#define GDEHC12         0x04    /* DE HC12 KWP/BDLC SUBTYPE */
+
+#define GKWP2000        0x04    /* Keyword protocol 2000 TYPE */
+#define GDEHC12KWP      0x01    /* DE HC12 KWP/BDLC card SUBTYPE */
+
+#define GHONDA          0x05    /* Honda UART TYPE */
+#define GDGHC08         0x01    /* DG HC08 SUBTYPE */
+
+#define GFORDUBP        0x06    /* FORD UBP TYPE */
+#define GDGUBP08        0x01    /* DG HC08 SUBTYPE */
+
+#define GSCI            0x09    /* Chrysler SCI TYPE */
+#define G16550SCI       0x01    /* 16550 type UART based card SUBTYPE */
+
+#define GCCD            0x0a    /* Chrysler C2D TYPE */
+#define G16550CDP68HC68 0x01    /* 16550 / CDP68HC68S1 card SUBTYPE */
+
+#define GLIN            0x0b    /* LIN TYPE */
+#define GDGLIN08        0x01    /* DG HC08 SUBTYPE */
+#define GDGLIN_BEACON   0x03    /* DG BEACON LIN SUBTYPE */
+
+#define MEMCPY(dest, src, size)             \
+    memcpy (dest, src, size);                \
     *((dest)+size) = 0;
 
 
 typedef struct val_str_dsp {
-    int		value;
-    const char	*strptr;
-    int		(*cmd_fnct)(tvbuff_t *, int, proto_tree*);
-    int		(*rsp_fnct)(tvbuff_t *, int, proto_tree*);
+    int        value;
+    const char    *strptr;
+    int        (*cmd_fnct)(tvbuff_t *, int, proto_tree*);
+    int        (*rsp_fnct)(tvbuff_t *, int, proto_tree*);
 } val_str_dsp;
 
 typedef struct val_str_dsp_with_context {