From Steve Limkemann:

    Added two new "well known destinations": SD_IOPWR AND SD_UTIL.

    Added logic to dissect the CMD_SET_TIME command.

    Added an alterate destination for the CMD_PGM_START command.

    Added logic to dissect the CMD_SCHED_MSG_REPLACE command.

    Added logic to dissect the CMD_USDT_REGISTER command.

    Added logic to dissect the CMD_USDT_SET_FUNCTIONAL command.

    Added logic to dissect the following commands
       CMD_IOPWR_GETINP
       CMD_IOPWR_GETLATCH
       CMD_IOPWR_CLRLATCH
       CMD_IOPWR_GETOUT
       CMD_IOPWR_SETOUT
       CMD_IOPWR_SETBIT
       CMD_IOPWR_CLRBIT
       CMD_IOPWR_GETPOWER
       CMD_UTIL_SET_INIT_STRATEGY
       CMD_UTIL_GET_INIT_STRATEGY

    Added the ability to recongnize more IOCTLS.  (For the SJA1000 driver, LIN
        and power drivers.)

    Added the ability to recognize more card types.

    Added dissection of more fields for CMD_SCHED_TX command.

    Bug fixes and general updating.

svn path=/trunk/; revision=8607

1 files changed, 98 insertions, 3 deletions

diff --git a/plugins/gryphon/packet-gryphon.h b/plugins/gryphon/packet-gryphon.h
index a522f4142b..3abd0840f2 100644
--- a/plugins/gryphon/packet-gryphon.h
+++ b/plugins/gryphon/packet-gryphon.h
@@ -1,7 +1,7 @@
 /* packet-gryphon.c
  * Definitions for Gryphon packet disassembly structures and routines
  *
- * $Id: packet-gryphon.h,v 1.7 2002/08/28 20:39:05 jmayer Exp $
+ * $Id: packet-gryphon.h,v 1.8 2003/10/03 23:22:12 guy Exp $
  *
  * Ethereal - Network traffic analyzer
  * By Steve Limkemann <stevelim@dgtech.com>
@@ -38,6 +38,8 @@
 #define SD_BLM	    	    	0x23	/* Bus Load Monitoring */
 #define SD_FLIGHT   	    	0x25	/* Flight Recorder */
 #define SD_RESP     	    	0x26	/* Message Response */
+#define SD_IOPWR                0x27    /* VNG / Compact Gryphon I/O & power */
+#define SD_UTIL                 0x28    /* Miscellaneous utility commands   */
 
 
 
@@ -63,6 +65,7 @@
 #define CMD_RESET_RXDROP	0x08	/* Set count of Rx msgs dropped to zero */
 #define CMD_BCAST_ON		0x09	/* broadcasts on */
 #define CMD_BCAST_OFF		0x0a	/* broadcasts off */
+#define CMD_SET_TIME		0x0b	/* set time */
 
 /* SD-type specific commands: should start at 0x40, global uniqueness	*/
 /* is prefered, but not mandatory.					*/
@@ -125,6 +128,7 @@
 #define CMD_PGM_DELETE	    	(SD_PGM * 256 + 0x92)	/* Delete an uploaded program */
 #define CMD_PGM_LIST	    	(SD_PGM * 256 + 0x93)	/* Get a list of uploaded programs */
 #define CMD_PGM_START	    	(SD_PGM * 256 + 0x94)	/* Start an uploaded program */
+#define CMD_PGM_START2	    	(SD_CLIENT * 256 + 0x94)/* Start an uploaded program */
 #define CMD_PGM_STOP	    	(SD_PGM * 256 + 0x95)	/* Stop an uploaded program */
 #define CMD_PGM_STATUS	    	(SD_PGM * 256 + 0x96)	/* Get the status of an uploaded program */
 #define CMD_PGM_OPTIONS	    	(SD_PGM * 256 + 0x97)	/* Set the upload options */
@@ -135,11 +139,29 @@
 #define CMD_SCHED_TX		(SD_SCHED * 256 + 0x70)	/* schedule transmission list */
 #define CMD_SCHED_KILL_TX	(SD_SCHED * 256 + 0x71)	/* stop and destroy job */
 #define CMD_SCHED_STOP_TX	(SD_SCHED * 256 + 0x71)	/* deprecated */
+#define CMD_SCHED_MSG_REPLACE   (SD_SCHED * 256 + 0x72) /* replace a scheduled message */
 
 /* USDT (SD_USDT) target commands: */
 
 #define	CMD_USDT_IOCTL		(SD_USDT * 256 + 0x47)	/* Register/Unregister with USDT */
+#define	CMD_USDT_REGISTER	(SD_USDT * 256 + 0xB0)	/* Register/Unregister with USDT */
+#define CMD_USDT_SET_FUNCTIONAL (SD_USDT * 256 + 0xB1)  /* Set to use extended addressing*/
 
+/* USDT (SD_IOPWR) target commands: */
+
+#define CMD_IOPWR_GETINP        (SD_IOPWR * 256 + 0x40) /*  Read current digital inputs  */   
+#define CMD_IOPWR_GETLATCH      (SD_IOPWR * 256 + 0x41) /*  Read latched digital inputs  */   
+#define CMD_IOPWR_CLRLATCH      (SD_IOPWR * 256 + 0x42) /*  Read & clear latched inputs  */   
+#define CMD_IOPWR_GETOUT        (SD_IOPWR * 256 + 0x43) /*  Read digital outputs         */   
+#define CMD_IOPWR_SETOUT        (SD_IOPWR * 256 + 0x44) /*  Write digital outputs        */   
+#define CMD_IOPWR_SETBIT        (SD_IOPWR * 256 + 0x45) /*  Set indicated output bit(s)  */   
+#define CMD_IOPWR_CLRBIT        (SD_IOPWR * 256 + 0x46) /*  Clear indicated output bit(s)*/   
+#define CMD_IOPWR_GETPOWER      (SD_IOPWR * 256 + 0x47) /*  Read inputs at power on time */   
+
+/* Miscellaneous (SD_UTIL) target commands: */
+
+#define CMD_UTIL_SET_INIT_STRATEGY (SD_UTIL * 256 + 0x90) /* set the initialization strategy  */
+#define CMD_UTIL_GET_INIT_STRATEGY (SD_UTIL * 256 + 0x91) /* get the initialization strategy  */
 
 /* response frame (FT_RESP) response field definitions: */
 
@@ -324,8 +346,66 @@
 #define GUBPSETINTERBYTE        0x11800004
 #define GUBPGETNACKMODE         0x11800005
 #define GUBPSETNACKMODE         0x11800006
-
-
+#define GUBPGETRETRYDELAY	0x11800007
+#define GUBPSETRETRYDELAY	0x11800008
+
+#define GRESETHC08              0x11800009
+#define GTESTHC08COP            0x1180000A
+
+#define GSJAGETLISTEN	        0x11250001
+#define GSJASETLISTEN	        0x11250002
+#define GSJAGETSELFTEST         0x11250003
+#define GSJASETSELFTEST         0x11250004
+#define GSJAGETXMITONCE         0x11250005
+#define GSJASETXMITONCE         0x11250006
+#define GSJAGETTRIGSTATE        0x11250007
+#define GSJASETTRIGCTRL         0x11250008
+#define GSJAGETTRIGCTRL         0x11250009
+#define GSJAGETOUTSTATE         0x1125000A
+#define GSJASETOUTSTATE         0x1125000B
+#define GSJAGETFILTER           0x1125000C
+#define GSJASETFILTER           0x1125000D
+#define GSJAGETMASK             0x1125000E
+#define GSJASETMASK             0x1125000F
+#define GSJAGETINTTERM          0x11250010
+#define GSJASETINTTERM          0x11250011
+#define GSJAGETFTTRANS          0x11250012
+#define GSJASETFTTRANS          0x11250013
+#define GSJAGETFTERROR          0x11250014
+
+#define GLINGETBITRATE          0x11C00001
+#define GLINSETBITRATE          0x11C00002
+#define GLINGETBRKSPACE         0x11C00003
+#define GLINSETBRKSPACE         0x11C00004
+#define GLINGETBRKMARK          0x11C00005
+#define GLINSETBRKMARK          0x11C00006
+#define GLINGETIDDELAY          0x11C00007
+#define GLINSETIDDELAY          0x11C00008
+#define GLINGETRESPDELAY        0x11C00009
+#define GLINSETRESPDELAY        0x11C0000A
+#define GLINGETINTERBYTE        0x11C0000B
+#define GLINSETINTERBYTE        0x11C0000C
+#define GLINGETWAKEUPDELAY      0x11C0000D
+#define GLINSETWAKEUPDELAY      0x11C0000E
+#define GLINGETWAKEUPTIMEOUT    0x11C0000F
+#define GLINSETWAKEUPTIMEOUT    0x11C00010
+#define GLINGETWUTIMOUT3BR      0x11C00011
+#define GLINSETWUTIMOUT3BR      0x11C00012
+#define GLINSENDWAKEUP          0x11C00013
+#define GLINGETMODE             0x11C00014
+#define GLINSETMODE             0x11C00015
+
+#define GINPGETINP              0x11500001
+#define GINPGETLATCH            0x11500002
+#define GINPCLRLATCH            0x11500003
+#define GOUTGET                 0x11510001
+#define GOUTSET                 0x11510002
+#define GOUTSETBIT              0x11510003
+#define GOUTCLEARBIT            0x11510004
+#define GPWRGETWHICH            0x11520001
+#define GPWROFF                 0x11520002
+#define GPWROFFRESET            0x11520003
+#define GPWRRESET	        0x11520004
 
 
 /* Hardware / driver TYPE and SUBTYPE definitions */
@@ -337,6 +417,13 @@
 #define G82527		0x01		/* 82527 SUBTYPE */
 #define GSJA1000	0x02		/* SJA1000 SUBTYPE */
 #define G82527SW	0x03		/* 82527 single wire subtype */
+#define G82527ISO11992	0x04		/* 82527 ISO11992 subtype */
+#define G82527_SINGLECHAN   0x05	/* 82527 single channel */
+#define G82527SW_SINGLECHAN 0x06	/* 82527 single wire single channel */
+#define G82527ISO11992_SINGLECHAN   0x07 /* 82527 ISO11992 single channel */
+#define GSJA1000FT	0x10		/* SJA1000 Fault Tolerant subtype */
+#define GSJA1000C	0x11		/* SJA1000 Compact subtype */
+#define GSJA1000FT_FO   0x12            /* SJA1000 single chsnnel Fault Tolerant subtype */
 
 #define GJ1850		0x03	/* 1850 TYPE */
 #define GHBCCPAIR	0x01		/* HBCC SUBTYPE */
@@ -353,6 +440,14 @@
 #define GFORDUBP	0x06	/* FORD UBP TYPE */
 #define GDGUBP08	0x01		/* DG HC08 SUBTYPE */
 
+#define GSCI		0x09	/* Chrysler SCI TYPE */
+#define G16550SCI	0x01		/* 16550 type UART based card SUBTYPE */
+
+#define GCCD		0x0a	/* Chrysler C2D TYPE */
+#define G16550CDP68HC68	0x01		/* 16550 / CDP68HC68S1 card SUBTYPE */
+
+#define GLIN    	0x0b	/* LIN TYPE */
+#define GDGLIN08	0x01		/* DG HC08 SUBTYPE */
 
 #define SIZEOF(x)   	(sizeof(x)/sizeof(x[0]))