For proto_tree_add_item(..., proto_xxx, ...)use ENC_NA as the encoding arg.

Also: remove trailing whitespace for a number of files.


git-svn-id: http://anonsvn.wireshark.org/wireshark/trunk@39503 f5534014-38df-0310-8fa8-9805f1628bb7

1 files changed, 14 insertions, 14 deletions

diff --git a/epan/dissectors/packet-rlm.c b/epan/dissectors/packet-rlm.c
index 3641208f43..d1d7f17a8a 100644
--- a/epan/dissectors/packet-rlm.c
+++ b/epan/dissectors/packet-rlm.c
@@ -12,39 +12,39 @@
  * modify it under the terms of the GNU General Public License
  * as published by the Free Software Foundation; either version 2
  * of the License, or (at your option) any later version.
- * 
+ *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- * 
+ *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  */
- 
+
 /*
  * RLM is a proprietary Cisco protocol used for centralling managing
  * many redundant NASes.  I don't know much about the format, but you
  * can read about the feature here:
- * 
+ *
  * http://www.cisco.com/en/US/docs/ios/12_0t/12_0t3/feature/guide/rlm_123.html
  *
  * RLM runs on a UDP port (default 3000) between the MGC and the NAS.
  * On port N+1 (default 3001), a Q.931/LAPD/UDP connection is maintained.
  * Both sides use the same local port number for the connection, so source
  * and dest port are always the same.
- * 
+ *
  * In large networks, the links are typically split onto higher ports,
  * so anything up to 3015 (or higher) could either be RLM or Q.931 traffic,
  * although always the RLM has the one lower port number for that RLM group.
  *
  * Multiple RLM groups are possible on a single NAS.
- * 
+ *
  * I haven't been able to find the protocol documented, so I've
  * guessed some of the fields based on the output of debug commands on
  * cisco NASes.
- * 
+ *
  */
 
 #ifdef HAVE_CONFIG_H
@@ -81,7 +81,7 @@ static gint ett_rlm = -1;
 /* #define ???	?? */
 
 
-/* 
+/*
   Maybe this isn't the best place for it, but RLM goes hand in hand
   with Q.931 traffic on a higher port.
 */
@@ -164,7 +164,7 @@ dissect_rlm(tvbuff_t *tvb, packet_info *pinfo, proto_tree *tree)
 	if (tree) {
 		/* proto_tree_add_protocol_format(tree, proto_rlm, tvb, 0,
 			16, "Cisco Session Management"); */
-		ti = proto_tree_add_item(tree, proto_rlm, tvb, 0, 8, FALSE);
+		ti = proto_tree_add_item(tree, proto_rlm, tvb, 0, 8, ENC_NA);
 		rlm_tree = proto_item_add_subtree(ti, ett_rlm);
 		proto_tree_add_item(rlm_tree, hf_rlm_version, tvb, 0, 1, ENC_BIG_ENDIAN);
 		proto_tree_add_uint_format(rlm_tree, hf_rlm_type, tvb, 1, 1, rlm_type, "Type: %u (%s)", rlm_type, type_str);
@@ -203,27 +203,27 @@ proto_register_rlm(void)
 	static hf_register_info hf[] = {
 		{ &hf_rlm_version,
 			{ "Version",           "rlm.version",
-			FT_UINT8, BASE_DEC, NULL, 0x0,          
+			FT_UINT8, BASE_DEC, NULL, 0x0,
 			NULL, HFILL }
 		},
 		{ &hf_rlm_type,
 			{ "Type",           "rlm.type",
-			FT_UINT8, BASE_DEC, NULL, 0x0,          
+			FT_UINT8, BASE_DEC, NULL, 0x0,
 			NULL, HFILL }
 		},
 		{ &hf_rlm_unknown,
 			{ "Unknown",           "rlm.unknown",
-			FT_UINT16, BASE_HEX, NULL, 0x0,          
+			FT_UINT16, BASE_HEX, NULL, 0x0,
 			NULL, HFILL }
 		},
 		{ &hf_rlm_tid,
 			{ "Transaction ID",           "rlm.tid",
-			FT_UINT16, BASE_DEC, NULL, 0x0,          
+			FT_UINT16, BASE_DEC, NULL, 0x0,
 			NULL, HFILL }
 		},
 		{ &hf_rlm_unknown2,
 			{ "Unknown",           "rlm.unknown2",
-			FT_UINT16, BASE_HEX, NULL, 0x0,          
+			FT_UINT16, BASE_HEX, NULL, 0x0,
 			NULL, HFILL }
 		},
 	};