Remove Nmake build system

Change-Id: I3bd474f3cda9667dec66426b5729449953df3e61
Reviewed-on: https://code.wireshark.org/review/15777
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Jörg Mayer <jmayer@loplof.de>
Reviewed-by: Balint Reczey <balint@balintreczey.hu>

5 files changed, 8 insertions, 362 deletions

diff --git a/doc/Makefile.am b/doc/Makefile.am
index 6a2004b2d9..2c9cd5c34b 100644
--- a/doc/Makefile.am
+++ b/doc/Makefile.am
@@ -290,7 +290,6 @@ MAINTAINERCLEANFILES = \
 	Makefile.in
 
 EXTRA_DIST =				\
-	Makefile.nmake			\
 	README.capture			\
 	README.design			\
 	README.developer		\
diff --git a/doc/Makefile.nmake b/doc/Makefile.nmake
deleted file mode 100644
index f56d2c78a7..0000000000
--- a/doc/Makefile.nmake
+++ /dev/null
@@ -1,337 +0,0 @@
-# Makefile.nmake
-# Nmake file for Wireshark documentation
-#
-# Wireshark - Network traffic analyzer
-# By Gerald Combs <gerald@wireshark.org>
-# Copyright 1998 Gerald Combs
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-
-# We include dependencies on ../config.h in order to
-# capture when $(VERSION) changes.
-
-include ../config.nmake
-
-doc: wireshark.html tshark.html wireshark-filter.html capinfos.html \
-	ciscodump.html editcap.html idl2wrs.html mergecap.html reordercap.html \
-	text2pcap.html dumpcap.html androiddump.html sshdump.html rawshark.html \
-	dftest.html randpkt.html randpktdump.html \
-	idl2deb.html asn2deb.html extcap.html
-
-man: wireshark.1 tshark.1 wireshark-filter.4 capinfos.1 \
-	editcap.1 idl2wrs.1 mergecap.1 reordercap.1 \
-	text2pcap.1 dumpcap.1 androiddump.1 sshdump.1 rawshark.1 dftest.1 randpkt.1 \
-	idl2deb.1 asn2deb.1 extcap.4 randpktdump.1 ciscodump.1
-
-wireshark.pod: wireshark.pod.template AUTHORS-SHORT-FORMAT
-	copy /B wireshark.pod.template + AUTHORS-SHORT-FORMAT wireshark.pod
-
-#
-# Build the short version of the authors file for the about dialog
-#
-AUTHORS-SHORT: ../AUTHORS make-authors-short.pl
-	$(PERL) perlnoutf.pl make-authors-short.pl < ../AUTHORS > AUTHORS-SHORT
-
-#
-# Build the short version of the authors file with formatting codes for
-# the man page
-#
-AUTHORS-SHORT-FORMAT: AUTHORS-SHORT make-authors-format.pl
-	$(PERL) perlnoutf.pl make-authors-format.pl < AUTHORS-SHORT > AUTHORS-SHORT-FORMAT
-
-ws.css: ../docbook/ws.css
-	copy ..\docbook\ws.css .
-
-wireshark.1: wireshark.pod ../config.h
-	$(POD2MAN)                     \
-	--center="The Wireshark Network Analyzer" \
-	--release=$(VERSION)			 \
-	wireshark.pod > wireshark.1
-
-wireshark.html: wireshark.pod ../config.h ws.css
-	$(POD2HTML)                    \
-	--title="The Wireshark Network Analyzer $(VERSION)" \
-	--css=ws.css \
-	--noindex                                 \
-	wireshark.pod > wireshark.html
-
-tshark.1: tshark.pod ../config.h
-	$(POD2MAN)                     \
-	--center="The Wireshark Network Analyzer" \
-	--release=$(VERSION)			 \
-	tshark.pod > tshark.1
-
-tshark.html: tshark.pod ../config.h ws.css
-	$(POD2HTML)                    \
-	--title="tshark - The Wireshark Network Analyzer $(VERSION)" \
-	--css=ws.css \
-	--noindex                                 \
-	tshark.pod > tshark.html
-
-wireshark-filter.4: wireshark-filter.pod ../config.h
-	$(POD2MAN)                     \
-	--center="The Wireshark Network Analyzer" \
-	--release=$(VERSION)			 \
-	wireshark-filter.pod > wireshark.4
-
-wireshark-filter.html: wireshark-filter.pod ../config.h ws.css
-	$(POD2HTML)                    \
-	--title="wireshark-filter - The Wireshark Network Analyzer $(VERSION)" \
-	--css=ws.css \
-	--noindex                                 \
-	wireshark-filter.pod > wireshark-filter.html
-
-capinfos.1: capinfos.pod ../config.h
-	$(POD2MAN)                      \
-	--center="The Wireshark Network Analyzer" \
-	--release=$(VERSION)			 \
-	capinfos.pod > capinfos.1
-
-capinfos.html: capinfos.pod ../config.h ws.css
-	$(POD2HTML)                     \
-	--title="capinfos - The Wireshark Network Analyzer $(VERSION)" \
-	--css=ws.css \
-	--noindex                                 \
-	capinfos.pod > capinfos.html
-
-editcap.1: editcap.pod ../config.h
-	$(POD2MAN)                      \
-	--center="The Wireshark Network Analyzer" \
-	--release=$(VERSION)			 \
-	editcap.pod > editcap.1
-
-editcap.html: editcap.pod ../config.h ws.css
-	$(POD2HTML)                     \
-	--title="editcap - The Wireshark Network Analyzer $(VERSION)" \
-	--css=ws.css \
-	--noindex                                 \
-	editcap.pod > editcap.html
-
-asn2deb.1: asn2deb.pod ../config.h
-	$(POD2MAN)                      \
-	--center="The Wireshark Network Analyzer" \
-	--release=$(VERSION)			 \
-	asn2deb.pod > asn2deb.1
-
-asn2deb.html: asn2deb.pod ../config.h ws.css
-	$(POD2HTML)                     \
-	--title="asn2deb - The Wireshark Network Analyzer $(VERSION)" \
-	--css=ws.css \
-	--noindex                                 \
-	asn2deb.pod > asn2deb.html
-
-idl2deb.1: idl2deb.pod ../config.h
-	$(POD2MAN)                      \
-	--center="The Wireshark Network Analyzer" \
-	--release=$(VERSION)			 \
-	idl2deb.pod > idl2deb.1
-
-idl2deb.html: idl2deb.pod ../config.h ws.css
-	$(POD2HTML)                     \
-	--title="idl2deb - The Wireshark Network Analyzer $(VERSION)" \
-	--css=ws.css \
-	--noindex                                 \
-	idl2deb.pod > idl2deb.html
-
-idl2wrs.1: idl2wrs.pod ../config.h
-	$(POD2MAN)                      \
-	--center="The Wireshark Network Analyzer" \
-	--release=$(VERSION)			 \
-	idl2wrs.pod > idl2wrs.1
-
-idl2wrs.html: idl2wrs.pod ../config.h ws.css
-	$(POD2HTML)                     \
-	--title="idl2wrs - The Wireshark Network Analyzer $(VERSION)" \
-	--css=ws.css \
-	--noindex                                 \
-	idl2wrs.pod > idl2wrs.html
-
-mergecap.1: mergecap.pod ../config.h
-	$(POD2MAN)                      \
-	--center="The Wireshark Network Analyzer" \
-	--release=$(VERSION)			 \
-	mergecap.pod > mergecap.1
-
-mergecap.html: mergecap.pod ../config.h ws.css
-	$(POD2HTML)                     \
-	--title="mergecap - The Wireshark Network Analyzer $(VERSION)" \
-	--css=ws.css \
-	--noindex                                 \
-	mergecap.pod > mergecap.html
-
-reordercap.1: reordercap.pod ../config.h
-	$(POD2MAN)                      \
-	--center="The Wireshark Network Analyzer" \
-	--release=$(VERSION)			 \
-	reordercap.pod > reordercap.1
-
-reordercap.html: reordercap.pod ../config.h ws.css
-	$(POD2HTML)                     \
-	--title="reordercap - The Wireshark Network Analyzer $(VERSION)" \
-	--css=ws.css \
-	--noindex                                 \
-	reordercap.pod > reordercap.html
-
-text2pcap.1: text2pcap.pod ../config.h
-	$(POD2MAN)                      \
-	--center="The Wireshark Network Analyzer" \
-	--release=$(VERSION)			 \
-	text2pcap.pod > text2pcap.1
-
-text2pcap.html: text2pcap.pod ../config.h ws.css
-	$(POD2HTML)                     \
-	--title="text2pcap - The Wireshark Network Analyzer $(VERSION)" \
-	--css=ws.css \
-	--noindex                                 \
-	text2pcap.pod > text2pcap.html
-
-dumpcap.1: dumpcap.pod ../config.h
-	$(POD2MAN)                      \
-	--center="The Wireshark Network Analyzer" \
-	--release=$(VERSION)			 \
-	dumpcap.pod > dumpcap.1
-
-dumpcap.html: dumpcap.pod ../config.h ws.css
-	$(POD2HTML)                     \
-	--title="dumpcap - The Wireshark Network Analyzer $(VERSION)" \
-	--css=ws.css \
-	--noindex                                 \
-	dumpcap.pod > dumpcap.html
-
-extcap.4: extcap.pod ../config.h
-	$(POD2MAN)                      \
-	--center="The Wireshark Network Analyzer" \
-	--release=$(VERSION)			 \
-	extcap.pod > extcap.1
-
-extcap.html: extcap.pod ../config.h ws.css
-	$(POD2HTML)                     \
-	--title="extcap - The Wireshark Network Analyzer $(VERSION)" \
-	--css=ws.css \
-	--noindex                                 \
-	extcap.pod > extcap.html
-
-androiddump.1: androiddump.pod ../config.h
-	$(POD2MAN)                      \
-	--center="The Wireshark Network Analyzer" \
-	--release=$(VERSION)			 \
-	androiddump.pod > androiddump.1
-
-androiddump.html: androiddump.pod ../config.h ws.css
-	$(POD2HTML)                     \
-	--title="androiddump - The Wireshark Network Analyzer $(VERSION)" \
-	--css=ws.css \
-	--noindex                                 \
-	androiddump.pod > androiddump.html
-
-sshdump.1: sshdump.pod ../config.h
-	$(POD2MAN)                      \
-	--center="The Wireshark Network Analyzer" \
-	--release=$(VERSION)			 \
-	sshdump.pod > sshdump.1
-
-sshdump.html: sshdump.pod ../config.h ws.css
-	$(POD2HTML)                     \
-	--title="sshdump - The Wireshark Network Analyzer $(VERSION)" \
-	--css=ws.css \
-	--noindex                                 \
-	sshdump.pod > sshdump.html
-
-ciscodump.1: ciscodump.pod ../config.h
-	$(POD2MAN)                      \
-	--center="The Wireshark Network Analyzer" \
-	--release=$(VERSION)			 \
-	ciscodump.pod > ciscodump.1
-
-ciscodump.html: ciscodump.pod ../config.h ws.css
-	$(POD2HTML)                     \
-	--title="ciscodump - The Wireshark Network Analyzer $(VERSION)" \
-	--css=ws.css \
-	--noindex                                 \
-	ciscodump.pod > ciscodump.html
-
-randpktdump.1: randpktdump.pod ../config.h
-	$(POD2MAN)                      \
-	--center="The Wireshark Network Analyzer" \
-	--release=$(VERSION)			 \
-	randpktdump.pod > randpktdump.1
-
-randpktdump.html: randpktdump.pod ../config.h ws.css
-	$(POD2HTML)                     \
-	--title="randpktdump - The Wireshark Network Analyzer $(VERSION)" \
-	--css=ws.css \
-	--noindex                                 \
-	randpktdump.pod > randpktdump.html
-
-rawshark.1: rawshark.pod ../config.h
-	$(POD2MAN)                      \
-	--center="The Wireshark Network Analyzer" \
-	--release=$(VERSION)			 \
-	rawshark.pod > rawshark.1
-
-rawshark.html: rawshark.pod ../config.h ws.css
-	$(POD2HTML)                     \
-	--title="rawshark - The Wireshark Network Analyzer $(VERSION)" \
-	--css=ws.css \
-	--noindex                                 \
-	rawshark.pod > rawshark.html
-
-dftest.1: dftest.pod ../config.h
-	$(POD2MAN)                      \
-	--center="The Wireshark Network Analyzer" \
-	--release=$(VERSION)			 \
-	dftest.pod > dftest.1
-
-dftest.html: dftest.pod ../config.h ws.css
-	$(POD2HTML)                     \
-	--title="dftest - The Wireshark Network Analyzer $(VERSION)" \
-	--css=ws.css \
-	--noindex                                 \
-	dftest.pod > dftest.html
-
-randpkt.1: randpkt.pod ../config.h
-	$(POD2MAN)                      \
-	--center="The Wireshark Network Analyzer" \
-	--release=$(VERSION)			 \
-	randpkt.pod > randpkt.1
-
-randpkt.html: randpkt.pod ../config.h ws.css
-	$(POD2HTML)                     \
-	--title="randpkt - The Wireshark Network Analyzer $(VERSION)" \
-	--css=ws.css \
-	--noindex                                 \
-	randpkt.pod > randpkt.html
-
-clean:
-	rm -f wireshark.html wireshark.1 wireshark.pod
-	rm -f tshark.html tshark.1
-	rm -f wireshark-filter.html wireshark-filter.4
-	rm -f capinfos.html capinfos.1
-	rm -f editcap.html editcap.1
-	rm -f idl2wrs.html idl2wrs.1
-	rm -f mergecap.html mergecap.1
-	rm -f reordercap.html reordercap.1
-	rm -f text2pcap.html text2pcap.1
-	rm -f dumpcap.html dumpcap.1
-	rm -f rawshark.html rawshark.1
-	rm -f randpkt.html randpkt.1
-	rm -f dftest.html dftest.1
-	rm -f pod2htm*
-	rm -f ws.css
-	rm -f AUTHORS-SHORT AUTHORS-SHORT-FORMAT
-
-distclean: clean
-
-maintainer-clean: distclean
diff --git a/doc/README.plugins b/doc/README.plugins
index 78744cc580..5302cef56c 100644
--- a/doc/README.plugins
+++ b/doc/README.plugins
@@ -291,8 +291,7 @@ is encouraged to update their plugins as outlined below:
     o Add a new Makefile.common file with the lists of source files and
       headers.
 
-    o Change the Makefile.am and Makefile.nmake files to match those of
-      the DOCSIS plugin.
+    o Change the Makefile.am file to match the one of the DOCSIS plugin.
 
 
 6 How to plugin related interface options
diff --git a/doc/README.qt b/doc/README.qt
index b47ca6d96a..4ff412c3b5 100644
--- a/doc/README.qt
+++ b/doc/README.qt
@@ -49,11 +49,6 @@ There are several ways of building the Qt UI:
 
    Qt (--with-qt) is enabled by default.
 
-4) Qt Creator + Wireshark.pro:
-
-   Wireshark.pro (formerly QtShark.pro) was used to bootstrap the UI porting
-   effort. It is still used by Nmake but will likely be removed at some point.
-
 1.1 Prerequisites
 
 Before compiling you need the Qt SDK and Qt Creator.
@@ -79,7 +74,7 @@ select "Build Settings" and do the following:
 
 - In "Edit build configuration" make sure the "Release" build is selected.
   (The "Debug" build won't work unless Wireshark is recompiled to link with a "debug"
-   the "debug" C runtime library (using /MDd). See ui\qt\Wireshark.pro for details).
+   the "debug" C runtime library (using /MDd)).
 
 - Make sure "Qt version" matches your version of Visual Studio.
 - Make sure "Tool chain" matches your Visual C++ version.
@@ -96,19 +91,10 @@ XXX: (WMeier): I've not had too much satisfaction using the "native Windows debu
 
 1.1.2.2 Command Line
 
-- Setup environment:
-    c:\qt\4.8.0\bin\qtvars.bat [vsvars]     ;;; optional 'vsvars' to also setup VC env vars
-
 - [Create and] Switch to a working dir to be used for .obj files, etc for Wireshark-qt compilation
 
-- Use qmake to create Windows Makefile (based upon info in ui\qt\Wireshark.pro and config.pri)
-    qmake -o Makefile.nmake ..\..\ui\qt\QtShark.pro
-                                  ;; (Only needs to be run once;
-                                  ;; nmake -f Makefile.nmake  will redo qmake if any
-                                  ;; dependendencies (e.g., Wireshark.pro) change.
+- Use CMake to create Windows Makefile and compile (see README.cmake)
 
-- Compile & Build
-    nmake -f Makefile.nmake       ;; wireshark.exe + all DLL's will be in <working-dir>\wireshark-qt-debug
 - Run:
     <working-dir>\wireshark-qt-debug
 
@@ -116,7 +102,7 @@ XXX: (WMeier): I've not had too much satisfaction using the "native Windows debu
     Start Visual Studio;
     File ! Open ! Project/Solution  ! .../<working-dir>/wireshark-qt-debug/wireshark.exe
     (Using  Solution Explorer ! Properties ! Environment to
-     add PATH=C:\Qt\4.8.0\bin;%PATH% will pobably be required).
+     add PATH=C:\Qt\4.8.0\bin;%PATH% will probably be required).
     ... Debug in the usual manner
 
 
diff --git a/doc/README.wslua b/doc/README.wslua
index 74074904e3..e1a02b3f01 100644
--- a/doc/README.wslua
+++ b/doc/README.wslua
@@ -44,11 +44,10 @@ Lua tables. (you can do so, but it's not advisable)
 Both of the perl scripts above are given the C-source files to search through
 by the make process, generated from the lists in epan/wslua/CMakeLists.txt.
 Naturally if you add new source files, you need to add them to the list in
-epan/wslua/CMakeLists.txt, as well as epan/wslua/Makefile.am and
-epan/wslua/Makefile.nmake. You also have to add the module name into
-docbook/user-guide.xml and docbook/wsluarm.xml, and the source files into
-docbook/CMakeLists.txt and docbook/Makefile.common, to get it to be generated
-in the user guide.
+epan/wslua/CMakeLists.txt and epan/wslua/Makefile.am. You also have to add
+the module name into docbook/user-guide.xml and docbook/wsluarm.xml, and the
+source files into docbook/CMakeLists.txt and docbook/Makefile.common, to get
+it to be generated in the user guide.
 
 Another Perl script is used as well, called 'make-init-lua.pl', which
 generates the init.lua script.  A large part of it deals with exposing #define