Update the doc directory to use https://www.wireshark.org.

Change-Id: I9bfc57cb6b6ab6962b80ff58d98eb351d6f69829
Reviewed-on: https://code.wireshark.org/review/4140
Reviewed-by: Gerald Combs <gerald@wireshark.org>

19 files changed, 45 insertions, 45 deletions

diff --git a/doc/README.developer b/doc/README.developer
index 7c4f310207..3dbcdff3e7 100644
--- a/doc/README.developer
+++ b/doc/README.developer
@@ -19,7 +19,7 @@ build toolkit".
 
 How to setup such an environment is platform dependent; detailed information
 about these steps can be found in the "Developer's Guide" (available from:
-http://www.wireshark.org) and in the INSTALL and README files of the sources
+https://www.wireshark.org) and in the INSTALL and README files of the sources
 root dir.
 
 0.1. General README files.
@@ -716,7 +716,7 @@ The compiler flags in the Makefiles are set to "treat warnings as errors",
 so your code won't even compile when warnings occur.
 
 /*
- * Editor modelines  -  http://www.wireshark.org/tools/modelines.html
+ * Editor modelines  -  https://www.wireshark.org/tools/modelines.html
  *
  * Local variables:
  * c-basic-offset: 4
diff --git a/doc/README.dissector b/doc/README.dissector
index f49f475d3b..2495c918de 100644
--- a/doc/README.dissector
+++ b/doc/README.dissector
@@ -18,7 +18,7 @@ build toolkit".
 
 How to setup such an environment is platform dependent; detailed information
 about these steps can be found in the "Developer's Guide" (available from:
-http://www.wireshark.org) and in the INSTALL and README files of the sources
+https://www.wireshark.org) and in the INSTALL and README files of the sources
 root dir.
 
 0.1. Dissector related README files.
@@ -2066,7 +2066,7 @@ to the DISSECTOR_SRC section of epan/CMakeLists.txt
 
 1.9 Using the git source code tree.
 
-  See <http://www.wireshark.org/develop.html>
+  See <https://www.wireshark.org/develop.html>
 
 
 1.10 Submitting code for your new dissector.
@@ -2094,7 +2094,7 @@ to the DISSECTOR_SRC section of epan/CMakeLists.txt
 
   - Subscribe to <mailto:wireshark-dev[AT]wireshark.org> by sending an email to
     <mailto:wireshark-dev-request[AT]wireshark.org?body="help"> or visiting
-    <http://www.wireshark.org/lists/>.
+    <https://www.wireshark.org/lists/>.
 
   - 'git diff' to verify all your changes look good.
 
@@ -3160,7 +3160,7 @@ correctly, building or updating whatever state information is
 necessary, in either case.
 
 /*
- * Editor modelines  -  http://www.wireshark.org/tools/modelines.html
+ * Editor modelines  -  https://www.wireshark.org/tools/modelines.html
  *
  * Local variables:
  * c-basic-offset: 4
diff --git a/doc/README.idl2wrs b/doc/README.idl2wrs
index 4e6db56d6f..af899b0f16 100644
--- a/doc/README.idl2wrs
+++ b/doc/README.idl2wrs
@@ -35,7 +35,7 @@ a CORBA class when teaching students how CORBA traffic looks like
 "on the wire".
 
 It is also COOL to work on a great Open Source project such as
-the case with "Wireshark" (http://www.wireshark.org)
+the case with "Wireshark" (https://www.wireshark.org)
 
 
 How to use idl2wrs
diff --git a/doc/README.packaging b/doc/README.packaging
index 5a6b999826..6446fe1fda 100644
--- a/doc/README.packaging
+++ b/doc/README.packaging
@@ -5,18 +5,18 @@ package containing Wireshark:
 
 1.1. Wireshark web site.
 
-The Wireshark web site URL is http://www.wireshark.org/ .
+The Wireshark web site URL is https://www.wireshark.org/ .
 
 1.2. Wireshark releases.
 
 The canonical location for every Wireshark source release is
 
-    http://www.wireshark.org/download/src/all-versions/, e.g.
+    https://www.wireshark.org/download/src/all-versions/, e.g.
 
-    http://www.wireshark.org/download/src/all-versions/wireshark-0.99.55.tar.bz2
+    https://www.wireshark.org/download/src/all-versions/wireshark-0.99.55.tar.bz2
 
 If your packaging system downloads a copy of the Wireshark sources, use
-this location. Don't use http://www.wireshark.org/download/src.
+this location. Don't use https://www.wireshark.org/download/src.
 
 1.3. Artwork.
 
diff --git a/doc/README.wmem b/doc/README.wmem
index 833a393b8c..444fc26c7a 100644
--- a/doc/README.wmem
+++ b/doc/README.wmem
@@ -350,7 +350,7 @@ The test suite could potentially use a clean-up by someone more
 intimately familiar with Glib's testing framework, but it does the job.
 
 /*
- * Editor modelines  -  http://www.wireshark.org/tools/modelines.html
+ * Editor modelines  -  https://www.wireshark.org/tools/modelines.html
  *
  * Local variables:
  * c-basic-offset: 4
diff --git a/doc/capinfos.pod b/doc/capinfos.pod
index c3247414bd..94a217d014 100644
--- a/doc/capinfos.pod
+++ b/doc/capinfos.pod
@@ -63,7 +63,7 @@ supported by B<Wireshark>.
 The input files don't need a specific filename extension; the file
 format and an optional gzip compression will be automatically detected.
 Near the beginning of the DESCRIPTION section of wireshark(1) or
-L<http://www.wireshark.org/docs/man-pages/wireshark.html>
+L<https://www.wireshark.org/docs/man-pages/wireshark.html>
 is a detailed description of the way B<Wireshark> handles this, which is
 the same way B<Capinfos> handles this.
 
@@ -342,10 +342,10 @@ dumpcap(1), pcap-filter(7) or tcpdump(8)
 =head1 NOTES
 
 B<Capinfos> is part of the B<Wireshark> distribution.  The latest version
-of B<Wireshark> can be found at L<http://www.wireshark.org>.
+of B<Wireshark> can be found at L<https://www.wireshark.org>.
 
 HTML versions of the Wireshark project man pages are available at:
-L<http://www.wireshark.org/docs/man-pages>.
+L<https://www.wireshark.org/docs/man-pages>.
 
 =head1 AUTHORS
 
diff --git a/doc/captype.pod b/doc/captype.pod
index fe6da2f97c..d5ea7cd0bd 100644
--- a/doc/captype.pod
+++ b/doc/captype.pod
@@ -19,7 +19,7 @@ supported by B<Wireshark>.
 The input files don't need a specific filename extension; the file
 format and an optional gzip compression will be automatically detected.
 Near the beginning of the DESCRIPTION section of wireshark(1) or
-L<http://www.wireshark.org/docs/man-pages/wireshark.html>
+L<https://www.wireshark.org/docs/man-pages/wireshark.html>
 is a detailed description of the way B<Wireshark> handles this, which is
 the same way B<Capinfos> handles this.
 
@@ -31,10 +31,10 @@ dumpcap(1), capinfos(1), pcap-filter(7) or tcpdump(8)
 =head1 NOTES
 
 B<Captype> is part of the B<Wireshark> distribution.  The latest version
-of B<Wireshark> can be found at L<http://www.wireshark.org>.
+of B<Wireshark> can be found at L<https://www.wireshark.org>.
 
 HTML versions of the Wireshark project man pages are available at:
-L<http://www.wireshark.org/docs/man-pages>.
+L<https://www.wireshark.org/docs/man-pages>.
 
 =head1 AUTHORS
 
diff --git a/doc/dfilter2pod.pl b/doc/dfilter2pod.pl
index 32ada7d6d4..4c08a259c9 100755
--- a/doc/dfilter2pod.pl
+++ b/doc/dfilter2pod.pl
@@ -70,7 +70,7 @@ getopts('e');
 
 if ($opt_e) {
 	$proto_abbrev{'Unable to generate filter documentation'} =
-		'Please refer to http://www.wireshark.org/docs/dfref/';
+		'Please refer to https://www.wireshark.org/docs/dfref/';
 	printf STDERR "Creating empty filter list.\n";
 } else {
 	# Read all the data into memory
diff --git a/doc/dumpcap.pod b/doc/dumpcap.pod
index 42e5d54f42..cabbdbbe4a 100644
--- a/doc/dumpcap.pod
+++ b/doc/dumpcap.pod
@@ -360,10 +360,10 @@ pcap-filter(7) or tcpdump(8)
 =head1 NOTES
 
 B<Dumpcap> is part of the B<Wireshark> distribution.  The latest version
-of B<Wireshark> can be found at L<http://www.wireshark.org>.
+of B<Wireshark> can be found at L<https://www.wireshark.org>.
 
 HTML versions of the Wireshark project man pages are available at:
-L<http://www.wireshark.org/docs/man-pages>.
+L<https://www.wireshark.org/docs/man-pages>.
 
 =head1 AUTHORS
 
diff --git a/doc/editcap.pod b/doc/editcap.pod
index c9b7ee32fe..f8efcb774d 100644
--- a/doc/editcap.pod
+++ b/doc/editcap.pod
@@ -62,7 +62,7 @@ are supported by B<Wireshark>.
 The input file doesn't need a specific filename extension; the file
 format and an optional gzip compression will be automatically detected.
 Near the beginning of the DESCRIPTION section of wireshark(1) or
-L<http://www.wireshark.org/docs/man-pages/wireshark.html>
+L<https://www.wireshark.org/docs/man-pages/wireshark.html>
 is a detailed description of the way B<Wireshark> handles this, which is
 the same way B<Editcap> handles this.
 
@@ -392,10 +392,10 @@ text2pcap(1), od(1), pcap-filter(7) or tcpdump(8)
 =head1 NOTES
 
 B<Editcap> is part of the B<Wireshark> distribution.  The latest version
-of B<Wireshark> can be found at L<http://www.wireshark.org>.
+of B<Wireshark> can be found at L<https://www.wireshark.org>.
 
 HTML versions of the Wireshark project man pages are available at:
-L<http://www.wireshark.org/docs/man-pages>.
+L<https://www.wireshark.org/docs/man-pages>.
 
 =head1 AUTHORS
 
diff --git a/doc/idl2wrs.pod b/doc/idl2wrs.pod
index 922a7dcf83..38627ddc4e 100644
--- a/doc/idl2wrs.pod
+++ b/doc/idl2wrs.pod
@@ -81,7 +81,7 @@ wireshark(1), tshark(1)
 
 B<idl2wrs> (including B<wireshark_be.py> and B<wireshark_gen.py>) are part of
 the B<Wireshark> distribution.  The latest version of B<Wireshark> can
-be found at L<http://www.wireshark.org>.
+be found at L<https://www.wireshark.org>.
 
 B<idl2wrs> uses B<omniidl>, an IDL parser, and can be found at
 L<http://omniorb.sourceforge.net/>
diff --git a/doc/mergecap.pod b/doc/mergecap.pod
index 65e75d4f6a..dd845443bb 100644
--- a/doc/mergecap.pod
+++ b/doc/mergecap.pod
@@ -31,7 +31,7 @@ are supported by B<Wireshark>.
 The input files don't need a specific filename extension; the file
 format and an optional gzip compression will be automatically detected.
 Near the beginning of the DESCRIPTION section of wireshark(1) or
-L<http://www.wireshark.org/docs/man-pages/wireshark.html>
+L<https://www.wireshark.org/docs/man-pages/wireshark.html>
 is a detailed description of the way B<Wireshark> handles this, which is
 the same way B<Mergecap> handles this.
 
@@ -147,10 +147,10 @@ B<Mergecap> is based heavily upon B<editcap> by Richard Sharpe
 <sharpe[AT]ns.aus.com> and Guy Harris <guy[AT]alum.mit.edu>.
 
 B<Mergecap> is part of the B<Wireshark> distribution.  The latest version
-of B<Wireshark> can be found at L<http://www.wireshark.org>.
+of B<Wireshark> can be found at L<https://www.wireshark.org>.
 
 HTML versions of the Wireshark project man pages are available at:
-L<http://www.wireshark.org/docs/man-pages>.
+L<https://www.wireshark.org/docs/man-pages>.
 
 =head1 AUTHORS
 
diff --git a/doc/packet-PROTOABBREV.c b/doc/packet-PROTOABBREV.c
index c3b926f0f2..469b5b227d 100644
--- a/doc/packet-PROTOABBREV.c
+++ b/doc/packet-PROTOABBREV.c
@@ -349,7 +349,7 @@ proto_reg_handoff_PROTOABBREV(void)
 #endif
 
 /*
- * Editor modelines  -  http://www.wireshark.org/tools/modelines.html
+ * Editor modelines  -  https://www.wireshark.org/tools/modelines.html
  *
  * Local variables:
  * c-basic-offset: 4
diff --git a/doc/rawshark.pod b/doc/rawshark.pod
index 838eb6911e..168443d9b6 100644
--- a/doc/rawshark.pod
+++ b/doc/rawshark.pod
@@ -545,10 +545,10 @@ text2pcap(1), pcap-filter(7) or tcpdump(8)
 =head1 NOTES
 
 B<Rawshark> is part of the B<Wireshark> distribution. The latest version of
-B<Wireshark> can be found at L<http://www.wireshark.org>.
+B<Wireshark> can be found at L<https://www.wireshark.org>.
 
 HTML versions of the Wireshark project man pages are available at:
-L<http://www.wireshark.org/docs/man-pages>.
+L<https://www.wireshark.org/docs/man-pages>.
 
 =head1 AUTHORS
 
diff --git a/doc/reordercap.pod b/doc/reordercap.pod
index 50dc9b7493..19677d8243 100644
--- a/doc/reordercap.pod
+++ b/doc/reordercap.pod
@@ -28,7 +28,7 @@ are supported by B<Wireshark>.
 The input file doesn't need a specific filename extension; the file
 format and an optional gzip compression will be detected automatically.
 Near the beginning of the DESCRIPTION section of wireshark(1) or
-L<http://www.wireshark.org/docs/man-pages/wireshark.html>
+L<https://www.wireshark.org/docs/man-pages/wireshark.html>
 is a detailed description of the way B<Wireshark> handles this, which is
 the same way B<reordercap> handles this.
 
@@ -55,13 +55,13 @@ text2pcap(1), pcap-filter(7) or tcpdump(8)
 =head1 NOTES
 
 B<Reordercap> is part of the B<Wireshark> distribution.  The latest version
-of B<Wireshark> can be found at L<http://www.wireshark.org>.
+of B<Wireshark> can be found at L<https://www.wireshark.org>.
 
 It may make sense to move this functionality into B<editcap>, or perhaps
 B<mergecap>, in which case B<reordercap> could be retired.
 
 HTML versions of the Wireshark project man pages are available at:
-L<http://www.wireshark.org/docs/man-pages>.
+L<https://www.wireshark.org/docs/man-pages>.
 
 =head1 AUTHORS
 
diff --git a/doc/text2pcap.pod b/doc/text2pcap.pod
index 62f09ebe76..6da2334d2a 100644
--- a/doc/text2pcap.pod
+++ b/doc/text2pcap.pod
@@ -248,7 +248,7 @@ editcap(1), strptime(3), pcap-filter(7) or tcpdump(8)
 =head1 NOTES
 
 B<Text2pcap> is part of the B<Wireshark> distribution.  The latest version
-of B<Wireshark> can be found at L<http://www.wireshark.org>.
+of B<Wireshark> can be found at L<https://www.wireshark.org>.
 
 =head1 AUTHORS
 
diff --git a/doc/tshark.pod b/doc/tshark.pod
index 62e3b5e790..05f5b9700f 100644
--- a/doc/tshark.pod
+++ b/doc/tshark.pod
@@ -74,7 +74,7 @@ are supported by B<Wireshark>.
 The input file doesn't need a specific filename extension; the file
 format and an optional gzip compression will be automatically detected.
 Near the beginning of the DESCRIPTION section of wireshark(1) or
-L<http://www.wireshark.org/docs/man-pages/wireshark.html>
+L<https://www.wireshark.org/docs/man-pages/wireshark.html>
 is a detailed description of the way B<Wireshark> handles this, which is
 the same way B<Tshark> handles this.
 
@@ -1755,10 +1755,10 @@ text2pcap(1), mergecap(1), pcap-filter(7) or tcpdump(8)
 =head1 NOTES
 
 B<TShark> is part of the B<Wireshark> distribution.  The latest version
-of B<Wireshark> can be found at L<http://www.wireshark.org>.
+of B<Wireshark> can be found at L<https://www.wireshark.org>.
 
 HTML versions of the Wireshark project man pages are available at:
-L<http://www.wireshark.org/docs/man-pages>.
+L<https://www.wireshark.org/docs/man-pages>.
 
 =head1 AUTHORS
 
diff --git a/doc/wireshark-filter.pod b/doc/wireshark-filter.pod
index 79f1697572..536bc3bcf1 100644
--- a/doc/wireshark-filter.pod
+++ b/doc/wireshark-filter.pod
@@ -24,7 +24,7 @@ Filters are also used by other features such as statistics generation and
 packet list colorization (the latter is only available to B<Wireshark>). This
 manual page describes their syntax. A comprehensive reference of filter fields
 can be found within Wireshark and in the display filter reference at
-L<http://www.wireshark.org/docs/dfref/>.
+L<https://www.wireshark.org/docs/dfref/>.
 
 =head1 FILTER SYNTAX
 
@@ -64,7 +64,7 @@ characters, expressed as a string (quoted or unquoted), or bytes,
 expressed as a byte array.  For example, to search for a given HTTP
 URL in a capture, the following filter can be used:
 
-    http contains "http://www.wireshark.org"
+    http contains "https://www.wireshark.org"
 
 The "contains" operator cannot be used on atomic fields,
 such as numbers or IP addresses.
@@ -388,7 +388,7 @@ can find references and examples at the following locations:
 
 =item *
 
-The online Display Filter Reference: L<http://www.wireshark.org/docs/dfref/>
+The online Display Filter Reference: L<https://www.wireshark.org/docs/dfref/>
 
 =item *
 
@@ -408,7 +408,7 @@ The Wireshark wiki: L<http://wiki.wireshark.org/DisplayFilters>
 
 The B<wireshark-filters> manpage is part of the B<Wireshark> distribution.
 The latest version of B<Wireshark> can be found at
-L<http://www.wireshark.org>.
+L<https://www.wireshark.org>.
 
 Regular expressions in the "matches" operator are provided by GRegex in GLib.
 See L<http://developer.gnome.org/glib/2.32/glib-regex-syntax.html/> or L<http://www.pcre.org/> for more information.
diff --git a/doc/wireshark.pod.template b/doc/wireshark.pod.template
index d57229b1bb..0808807ba0 100644
--- a/doc/wireshark.pod.template
+++ b/doc/wireshark.pod.template
@@ -1822,7 +1822,7 @@ Display locally installed HTML versions of these manual pages in a web browser.
 =item Help:Wireshark Online
 
 Various links to online resources to be open in a web browser, like
-L<http://www.wireshark.org>.
+L<https://www.wireshark.org>.
 
 =item Help:About Wireshark
 
@@ -2873,10 +2873,10 @@ text2pcap(1), pcap-filter(7) or tcpdump(8)
 =head1 NOTES
 
 The latest version of B<Wireshark> can be found at
-L<http://www.wireshark.org>.
+L<https://www.wireshark.org>.
 
 HTML versions of the Wireshark project man pages are available at:
-L<http://www.wireshark.org/docs/man-pages>.
+L<https://www.wireshark.org/docs/man-pages>.
 
 =head1 AUTHORS