1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
|
#ifndef _BOARD_
#define _BOARD_
/** Headers */
#include "chip.h"
/* We need this for a nop instruction in USB_HAL.c */
#define __CC_ARM
/** Board */
#include "board_lowlevel.h"
#include "uart_console.h"
#include "iso7816_4.h"
#include "led.h"
#include "cciddriver.h"
#include "usart.h"
#include "USBD.h"
#include "USBD_Config.h"
#include "USBDDriver.h"
/** Highlevel */
#include "trace.h"
#include "stdio.h"
#include "stdlib.h"
#include "string.h"
#include "inttypes.h"
#include "syscalls.h"
#define MIN(a, b) ((a < b) ? a : b)
#ifdef __GNUC__
#undef __GNUC__
#endif
/** Family definition (already defined) */
#define sam3s
/** Core definition */
#define cortexm3
#define BOARD_MCK 48000000
#define LED_RED PIO_PA17
#define LED_GREEN PIO_PA18
#define PIN_LED_RED {LED_RED, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
#define PIN_LED_GREEN {LED_GREEN, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
#define PINS_LEDS PIN_LED_RED, PIN_LED_GREEN
#define LED_NUM_RED 0
#define LED_NUM_GREEN 1
/** USART0 pin RX */
#define PIN_USART0_RXD {PIO_PA9A_URXD0, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
/** USART0 pin TX */
#define PIN_USART0_TXD {PIO_PA10A_UTXD0, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
#define BOARD_PIN_USART_RXD PIN_USART0_RXD
#define BOARD_PIN_USART_TXD PIN_USART0_TXD
#define BOARD_ID_USART ID_USART0
#define BOARD_USART_BASE USART0
#define PINS_UART { PIO_PA9A_URXD0|PIO_PA10A_UTXD0, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
/** UART0 */
/** Console baudrate always using 115200. */
#define CONSOLE_BAUDRATE 115200
/** Usart Hw interface used by the console (UART0). */
#define CONSOLE_USART UART0
/** Usart Hw ID used by the console (UART0). */
#define CONSOLE_ID ID_UART0
/** Pins description corresponding to Rxd,Txd, (UART pins) */
#define CONSOLE_PINS {PINS_UART}
/// Smartcard detection pin
// FIXME: add connect pin as iso pin...should it be periph b or interrupt oder input?
#define BOARD_ISO7816_BASE_USART USART0
#define BOARD_ISO7816_ID_USART ID_USART0
#define USART_SIM USART0
#define ID_USART_SIM ID_USART0
#define USART_PHONE USART1
#define ID_USART_PHONE ID_USART1
#define SIM_PWEN PIO_PA5
#define VCC_FWD PIO_PA26
//** USB **/
// USB pull-up control pin definition (PA16).
// Default: 1 (USB Pullup deactivated)
#define PIN_USB_PULLUP {1 << 16, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
// Board has UDP controller
#define BOARD_USB_UDP
// D+ has external pull-up
#define BOARD_USB_PULLUP_EXTERNAL
#define BOARD_USB_NUMENDPOINTS 8
// FIXME: in all other cases return 0?
#define BOARD_USB_ENDPOINTS_MAXPACKETSIZE(i) (((i == 4) || (i == 5))? 512 : 64)
#define BOARD_USB_ENDPOINTS_BANKS(i) (((i == 0) || (i == 3)) ? 1 : 2)
/// USB attributes configuration descriptor (bus or self powered, remote wakeup)
//#define BOARD_USB_BMATTRIBUTES USBConfigurationDescriptor_SELFPOWERED_NORWAKEUP
#define BOARD_USB_BMATTRIBUTES USBConfigurationDescriptor_BUSPOWERED_NORWAKEUP
//#define BOARD_USB_BMATTRIBUTES USBConfigurationDescriptor_SELFPOWERED_RWAKEUP
#define BOARD_USB_VENDOR SIMTRACE_VENDOR_ID
#define BOARD_USB_PRODUCT SIMTRACE_PRODUCT_ID
#define BOARD_USB_RELEASE 0
#define BOARD_USB_DFU
#define BOARD_DFU_BOOT_SIZE (16 * 1024)
#define BOARD_DFU_PAGE_SIZE 512
#define BOARD_DFU_NUM_IF 2
extern void board_exec_dbg_cmd(int ch);
extern void board_main_top(void);
#endif
|
