path: root/firmware/libboard
AgeCommit message (Expand)AuthorFilesLines
2018-07-24I2C: return error after failed writeKévin Redon1-7/+7
2018-07-24I2C: add wait time after write to let EEPROM writeKévin Redon1-0/+2
2018-07-11make adc2uv commonKévin Redon2-2/+2
2018-07-11LED: add need patternKévin Redon2-0/+13
2018-07-11replace leading spaces with tabsKévin Redon4-381/+381
2018-07-11set linux end of lineKévin Redon3-850/+850
2018-07-11firmware: set license to GPLv2+Kévin Redon26-31/+375
2018-07-11DFU: use central DFU override checkKévin Redon1-20/+6
2018-07-07DFU: re-enable UART after testing forced bootloaderKévin Redon1-8/+20
2018-07-07UART: remove unused codeKévin Redon1-1/+0
2018-07-07UART: make IRQ/ISR enabling simplerKévin Redon1-8/+4
2018-07-07DFU: disable configured console UART before starting main appKévin Redon3-0/+19
2018-07-07DFU: set stack pointer before starting main appKévin Redon1-1/+5
2018-07-04fix LED switching on/offKing Kévin1-2/+2
2018-07-04console: drop data to be send when buffer is already fullKévin Redon1-10/+8
2018-07-04USB: add central file to define USB IDs, classes, and endpointsKévin Redon4-15/+3
2018-07-04LED: add short LED pulse blinking patternKévin Redon2-9/+17
2018-07-04board: fix LED pin definitionKévin Redon1-2/+2
2018-07-04DFU: remove force bootloader button debug message since the console is output...Kévin Redon1-1/+2
2018-07-04SIMtrace: enable interrupt on edge dection for SIM_RST pin to reset the sniff...Kévin Redon1-1/+1
2018-07-04SIMtrace: fix default SIM_RST pin state to allow phone controlled resetKévin Redon1-1/+3
2018-07-04SIMtrace: only enable main sniffing mode on SIMtrace boardKévin Redon1-2/+2
2018-07-04board: comment USART definitions and add corresponding IRQ numbersKévin Redon1-2/+11
2018-07-04simtrace: add dedicated power pins configuration for sniffingKévin Redon1-5/+5
2018-07-04sniff: use USART 0 instead of USART 1Kévin Redon1-6/+12
2018-07-04SIMtrace board: comment and fix pin definitionKévin Redon1-65/+89
2018-07-04enable (empty) sniffer support for SIMtrace boardKévin Redon1-2/+2
2018-06-29Use system include <foo.h> notation for libosmocore headersHarald Welte3-3/+3
2018-06-29console: use buffer and interrupts instead of busy loops for UART debug outputKévin Redon2-13/+52
2018-06-29DFU: only boot the application if it has a valid startKévin Redon1-3/+14
2018-06-29DFU: uncomment print message when DFU is forced using the buttonKévin Redon1-1/+1
2018-06-29USB: implement USB reset by setting the on-board pull-up on D+ lowKévin Redon1-5/+4
2018-06-29fix pointer casting warningKévin Redon1-1/+1
2018-05-21add copyright noticeKévin Redon1-0/+1
2017-11-28simtrace: Boot into DFU when BOOTLOADER button is pressedHarald Welte2-0/+15
2017-11-28DFU: Move "Override DFU" (force DFU) code to board-specific sectionHarald Welte2-0/+37
2017-11-28board_simtrace: Add minimal debug menu on debug USARTHarald Welte1-0/+20
2017-11-28Make build of CCID code succeed again on BOARD=simtraceHarald Welte1-1/+1
2017-11-28fix build of APP=cardem on BOARD=simtraceHarald Welte2-6/+23
2017-11-03[firmware] sim_switch + wwan_perst: Don't re-initializeHarald Welte2-0/+2
2017-11-03[firmware] wwan_perst: Print index when releasing WWAN_PERSTHarald Welte1-1/+4
2017-11-03[firmware] wwam_led: use 0/1 instead of 1/2Harald Welte1-6/+6
2017-11-03[firmware] card_pres: use modem number at start of lineHarald Welte1-1/+1
2017-11-03[firmware] card_pres: Use 0/1 index number instead of 1/2Harald Welte1-5/+5
2017-05-20set local slot LED according to remote/local state.Harald Welte2-0/+9
2017-05-20uart_console: Re-start watchdog during busy-waiting for serial charsHarald Welte1-1/+3
2017-05-11dfu: make sure to not bloat the loader with main board init stuff.Harald Welte1-0/+7
2017-05-11perst/sim_switch: Log events using TRACE_INFOHarald Welte2-4/+13
2017-05-11consistently use 0-based counting of modems/slotsHarald Welte3-8/+8
2017-05-09Generalize SIM switching code and allow local/remote switching via USBHarald Welte4-32/+76