1 files changed, 132 insertions, 0 deletions
diff --git a/firmware/atmel_softpack_libraries/libchip_sam3s/source/wdt.c b/firmware/atmel_softpack_libraries/libchip_sam3s/source/wdt.c
new file mode 100644
index 0000000..f8a493b
--- /dev/null
+++ b/firmware/atmel_softpack_libraries/libchip_sam3s/source/wdt.c
@@ -0,0 +1,132 @@
+/* ----------------------------------------------------------------------------
+ *         ATMEL Microcontroller Software Support
+ * ----------------------------------------------------------------------------
+ * Copyright (c) 2009, Atmel Corporation
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the disclaimer below.
+ *
+ * Atmel's name may not be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ----------------------------------------------------------------------------
+ */
+
+/**
+ * \file
+ *
+ * Implementation of Watchdog Timer (WDT) controller.
+ *
+ */
+
+/** \addtogroup wdt_module Working with WDT
+ * The WDT driver provides the interface to configure and use the WDT
+ * peripheral.
+ *
+ * The WDT can be used to prevent system lock-up if the software becomes
+ * trapped in a deadlock. It can generate a general reset or a processor
+ * reset only. It is clocked by slow clock divided by 128.
+ *
+ * The WDT is running at reset with 16 seconds watchdog period (slow clock at 32.768 kHz)
+ * and external reset generation enabled. The user must either disable it or
+ * reprogram it to meet the application requires.
+ *
+ * To use the WDT, the user could follow these few steps:
+ * <ul>
+ * <li>Enable watchdog with given mode using \ref WDT_Enable().
+ * <li>Restart the watchdog using \ref WDT_Restart() within the watchdog period.
+ * </ul>
+ *
+ * For more accurate information, please look at the WDT section of the
+ * Datasheet.
+ *
+ * \note
+ * The Watchdog Mode Register (WDT_MR) can be written only once.\n
+ *
+ * Related files :\n
+ * \ref wdt.c\n
+ * \ref wdt.h.\n
+ */
+/*@{*/
+/*@}*/
+
+/*---------------------------------------------------------------------------
+ *        Headers
+ *---------------------------------------------------------------------------*/
+
+#include "chip.h"
+
+#include <stdint.h>
+
+/*----------------------------------------------------------------------------
+ *        Exported functions
+ *----------------------------------------------------------------------------*/
+
+/**
+ * \brief Enable watchdog with given mode.
+ *
+ * \note The Watchdog Mode Register (WDT_MR) can be written only once.
+ * Only a processor reset resets it.
+ *
+ * \param dwMode   WDT mode to be set
+ */
+extern void WDT_Enable( Wdt* pWDT, uint32_t dwMode )
+{
+    pWDT->WDT_MR = dwMode ;
+}
+
+/**
+ * \brief Disable watchdog.
+ *
+ * \note The Watchdog Mode Register (WDT_MR) can be written only once.
+ * Only a processor reset resets it.
+ */
+extern void WDT_Disable( Wdt* pWDT )
+{
+    pWDT->WDT_MR = WDT_MR_WDDIS;
+}
+
+/**
+ * \brief Watchdog restart.
+ */
+extern void WDT_Restart( Wdt* pWDT )
+{
+    pWDT->WDT_CR = 0xA5000001;
+}
+
+/**
+ * \brief Watchdog get status.
+ */
+extern uint32_t WDT_GetStatus( Wdt* pWDT )
+{
+    return (pWDT->WDT_SR & 0x3) ;
+}
+
+/**
+ * \brief Watchdog get period.
+ *
+ * \param dwMs   desired watchdog period in millisecond.
+ */
+extern uint32_t WDT_GetPeriod( uint32_t dwMs )
+{
+    if ( (dwMs < 4) || (dwMs > 16000) )
+    {
+        return 0 ;
+    }
+    return ((dwMs << 8) / 1000) ;
+}