fw/qmod: enable modem RESET by default at bootlaforge/tool

When the uC firmware starts, assert the (high-active) _RESET GPIOs,
which will cause the transistors to drive the mPCIe slot !PERST
low.

There is of course a short instance of time between the uC reset
until it executes wwan_perst_init(). To avoid this, a hardware
pull-up would have to be re-worked onto the _RESET[1..4] signals
on the PCBA

Change-Id: I8742fefa4bf02e728e34d5d8cbc0fda771e78ffb

0 files changed, 0 insertions, 0 deletions