Age | Commit message (Collapse) | Author | Files | Lines |
|
1) Now the SAP interface is selectable as SIM source using the 'sim sap'
command in VTY.
2) SAP connection starts only if it is configured as SIM source.
3) Fixed sap_socket_path configuration r/w errors.
Written-by: Яницкий Ва дим <axilirator@gmail.com>
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
|
|
The 'gps host HOST:PORT' line in the config file now is generated correctly.
So that it is parsed correctly when loading the config on next startup.
Also the gpsd port now is parsed as it should without a colon.
Written-by: Яницкий Ва дим <axilirator@gmail.com>
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
|
|
according to http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_005fINIT_005fAUTOMAKE-invocation
|
|
|
|
Patch mostly written by Nico Golde
and some cleanup/testing by Domonkos Tomcsanyi
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
|
|
Signed-off-by: Igor Almeida <igor.contato@gmail.com>
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
|
|
Submitted-by: Max <max.suraev@fairwaves.co>
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
|
|
Use correct variable to check if supplementary service code is known
or not.
|
|
|
|
This prevents duplication definition with main.c
From: Bhaskar <niceguy108@gmail.com>
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
|
|
From: Bhaskar <niceguy108@gmail.com>
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
|
|
From: Bhaskar <niceguy108@gmail.com>
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
|
|
The returned value of trans_assign_trans_id() must be stored into a
'int' rather than uint8_t to allow proper testing of negative return
values (errors).
Thanks to Bhaskar <niceguy108@gmail.com> for the original
patches.
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
|
|
|
|
As we later check if payload_len < 0, it should be signed, not unsigned.
|
|
Bugfix in Osmoload.c: Assigning correct value to data pointer in
LOADER_MEM_READ. Wrong value was introduced in last update when
msgb_get() was replaced by msgb_pull() which returns end of data instead
of start of data.
|
|
Patch-by: Martin Hauke <mardnh@gmx.de>
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
|
|
Patch-by: Martin Hauke <mardnh@gmx.de>
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
|
|
This allows to directly load highram-images on
compal phones with the commandline-switch
-c.
Signed-off-by: Steve Markgraf <steve@steve-m.de>
|
|
|
|
|
|
|
|
If "clip" is given at vty, CLIR must be suppressed, which results in
presentation of caller ID digits, even if suppressed by network.
If "clir" is given at vty, CLIR must be invoked, which results in
restriction of caller ID digits, even if not suppressed by network.
Note: This only work for outgoing caller ID. Incomming caller ID
restriction cannot be suppressed.
|
|
|
|
Some MDL-ERROR causes must not lead to link failure. The missing
"return 0" causes all errors to be ignored which are not listed inside
switch/case statement.
|
|
The downlink singalling failure counter DSC is decremented by 4
in case of unsuccessfull decoding of CCCH block and incremented
by 1 in case of successfull decoding of CCCH block. The initial
and maximum value of 90 requires to check the signal only once
per 51 multiframe.
If DRX would be supported, only a subset of 51 multiframes are
received, so the initial / maximum value of 90 must be reduced
accordingly.
|
|
This way it is possible to use test card without making attachment
to the network, if the LAI matches. It can be used to do faster
testing.
|
|
If mobile phone has started, it is reset after shutdown. This
ensures that the phone is not transmitting anymore, especially
while shutting down in dedicated mode.
Using CTRL+c:
The first signal causes initiating of shutdown with detach
procedure. The second signal causes initiating of shutdown
without detach procedure. The third signal will exit process
immidiately. (in case it hangs)
Using CTRL+z:
The first signal causes initiating of shutdown without detach
procedure. A subsequent CTRL+c would exit process immidiately.
|
|
Most of the output was only for debug purposes anyway.
Signed-off-by: Steve Markgraf <steve@steve-m.de>
|
|
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
|
|
Here we just use the transaction ID
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
|
|
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
|
|
Written-by: Dario Lombardo <lomato@libero.it>
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
|
|
When parsing SI4, there's a check and a log message saying that CBCH
MA is ignored until SI1 is received. Then the MA is decoded anyway --
incorrectly -- such that it remains incorrect even after receiving
the next SI1.
Fix that with an "else".
Signed-off-by: Alex Badea <vamposdecampos@gmail.com>
Signed-off-by: Andreas Eversberg <jolly@eversberg.eu>
|
|
If not checked, the MM process will crash, due to an endless loop
of trying to do location updating to barred cell.
|
|
All levels in range of 0..63 are now uint8_t and use "rxlev" as
variable name. All levels in range of -110..-47 are now int8_t and use
"rxlev_dbm" as variable name.
|
|
As andreas points out, there are structure members that are called
'rxlev' but which don't use the scaling (0..63) of the GSM specs, but
which are already a signed type and in dBm. So they need to be
converted.
TODO: Rename those structure members to rxlev_dbm or something that
explicitly states it is _not_ an 'RXLEV' value in terms of GSM.
|
|
As Dieter points out, this drastically improves the resiliance to high
receive levels on the C155. We cannot blindly assume a received signal
level of -85 dBm if the BTS is 2m away and we actually receive -40 dBm.
This patch extends the L1CTL_FBSB_REQ data structure in layer 1 with the
respective field, as well as the l1ctl_tx_fbsb_req() API function called
from the various layer23 apps.
"mobile" and "bcch_scan" already did a PM request and thus know the
expected signal power. "ccch_scan" and "cbch_sniff" apparently don't
do, so the -85 dBm constant is now hardcoded into the host-side source
code there, and should probably be fixed in a follow-up patch.
|
|
log message
|
|
If you enable PCS, you'll never make it out of power-measurement without
this patch.
|
|
We use 1 second on FACCH and 2 seconds on SACCH when SMS is transfered
during a call on TCH. There is no impact on bandwidth, because SAPIs use
differen channels.
In order to correctly transfer SMS during SDCCH, the T200 must be raised
from 1 (SAPI 0) to 2 (SAPI 0 and 3), so T200 will not timeout before
receiving acknowledge from BTS. This is because both SAPIs share the same
ressource on SDCCH. After release of SAPI 3, T200 is lowered back to 1.
|
|
libosmocore has changed its LAI decoding from hex to decimal. This caused
wrong decoding of MCC and MNC. In order to provide required hex
transcoding, special hex encoding and decoding function are added to
mobile/sysinfo.c.
|
|
|
|
Error:
gcc -Wall -I/home/kevredon/osmocom-bb/src/shared/libosmocore/include -I/home/kevredon/osmocom-bb/src/shared/libosmocore/include -g -O2 -D_HAVE_GPSD -lgps -o cell_log main.o app_cell_log.o cell_log.o geo.o ../common/liblayer23.a /home/kevredon/osmocom-bb/src/shared/libosmocore/build-host/src/.libs/libosmocore.a /home/kevredon/osmocom-bb/src/shared/libosmocore/build-host/src/gsm/.libs/libosmogsm.a /home/kevredon/osmocom-bb/src/shared/libosmocore/build-host/src/codec/.libs/libosmocodec.a -lm
../common/liblayer23.a(gps.o): In function `osmo_gpsd_cb':
/home/kevredon/osmocom-bb/src/host/layer23/src/common/gps.c:79: undefined reference to `gps_waiting'
Fix:
Holger told me to do so (he knows better then me about autoconf)
- set CFLAGS and LIBS for LIBGPS in layer23
- add libgps CFLAGS and LIBS in Makefile.am for common, misc, mobile
I would have done the following (which also works):
-AC_CHECK_LIB(gps, gps_waiting, CFLAGS+=" -D_HAVE_GPSD" LDFLAGS+=" -lgps",,)
+AC_CHECK_LIB(gps, gps_waiting, CFLAGS+=" -D_HAVE_GPSD" LDFLAGS+=" -lgps" LIBS+=" -lgps",,)
|
|
msgb_get() is for getting bytes from the end of a message, but it
was broken in libosmocore for a long time (until it was fixed today).
|
|
|
|
This is importaint on certan cells to finish BCCH scanning. If SI2ter
indication is falsely detected, BCCH reading will timeout, because no
expected SI2ter is received.
|
|
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
|
|
Signed-off-by: Tim Ehlers <osmocom@ehlers.info>
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
|
|
Written-by: Tim Ehlers <osmocom@ehlers.info>
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
|