summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorWolfram Sang <wolfram@the-dreams.de>2011-05-04 22:58:17 +0200
committerHarald Welte <laforge@gnumonks.org>2011-05-05 09:52:47 +0200
commita5611f9555fb288149c01371411a1405aa61056e (patch)
treefe968b3ccb2703c11e2785ccb1f23f2b42b3b281
parent07589649b1ae07a45afc370e222374281735aa72 (diff)
target/boards: add infrastructure for loaders for Mediatek platforms
We are just interested in the loaders here, no other applications needed. Split it from the compal-based phones. Add mt62xx as first user. Based on a patch by steve-m, but cleaned up and seperated from compal/calypso. Signed-off-by: Steve Markgraf <steve@steve-m.de> Signed-off-by: Wolfram Sang <wolfram@the-dreams.de>
-rw-r--r--src/Makefile8
-rw-r--r--src/target/firmware/Makefile.mtk32
-rw-r--r--src/target/firmware/apps/loader_mtk/main.c366
-rw-r--r--src/target/firmware/board/mediatek/macros.S76
-rw-r--r--src/target/firmware/board/mediatek/ram.lds112
-rw-r--r--src/target/firmware/board/mediatek/start.ram.S26
-rw-r--r--src/target/firmware/board/mediatek/uart.c426
-rw-r--r--src/target/firmware/board/mt62xx/init.c139
-rw-r--r--src/target/firmware/include/mtk/emi.h42
-rw-r--r--src/target/firmware/include/mtk/mt6235.h74
-rw-r--r--src/target/firmware/include/mtk/system.h195
11 files changed, 1495 insertions, 1 deletions
diff --git a/src/Makefile b/src/Makefile
index 1b6f2f71..d6f556f9 100644
--- a/src/Makefile
+++ b/src/Makefile
@@ -17,7 +17,7 @@ OSMOCORE_CONFIGURE_ENV= LIBOSMOCORE_LIBS=$(TOPDIR)/shared/libosmocore/build-host
LIBOSMOVTY_CFLAGS=-I$(TOPDIR)/shared/libosmocore/include \
LIBOSMOGSM_CFLAGS=-I$(TOPDIR)/shared/libosmocore/include
-all: libosmocore-target nofirmware firmware
+all: libosmocore-target nofirmware firmware mtk-firmware
nofirmware: libosmocore-host layer23 osmocon gsmmap
libosmocore-host: shared/libosmocore/build-host/src/.libs/libosmocore.la
@@ -93,6 +93,10 @@ host/layer23/layer23: host/layer23/Makefile libosmocore-host
firmware: libosmocore-target
make -C target/firmware CROSS_COMPILE=$(CROSS_TOOL_PREFIX)
+.PHONY: mtk-firmware
+mtk-firmware: libosmocore-target
+ make -C target/firmware -f Makefile.mtk CROSS_COMPILE=$(CROSS_TOOL_PREFIX)
+
clean:
make -C shared/libosmocore/build-host $@
@@ -100,10 +104,12 @@ clean:
make -C host/layer23 $@
make -C host/osmocon $@
make -C target/firmware $@
+ make -C target/firmware -f Makefile.mtk $@
distclean:
rm -rf shared/libosmocore/build-host
rm -rf shared/libosmocore/build-target
make -C host/layer23 $@
make -C host/osmocon $@
+# 'firmware' also handles 'mtk-firmware'
make -C target/firmware $@
diff --git a/src/target/firmware/Makefile.mtk b/src/target/firmware/Makefile.mtk
new file mode 100644
index 00000000..30fa2fcf
--- /dev/null
+++ b/src/target/firmware/Makefile.mtk
@@ -0,0 +1,32 @@
+# List of all supported boards (meant to be overridden on command line)
+BOARDS?=mt62xx
+
+# List of all applications (meant to be overridden on command line)
+APPLICATIONS?=loader_mtk
+
+mtkram_LDS=board/mediatek/ram.lds
+mtkram_OBJS=board/mediatek/start.ram.o
+
+mtk_COMMON_OBJS=board/mediatek/uart.o
+
+# Mediatek MT62xx
+mt62xx_OBJS=$(mtk_COMMON_OBJS) board/mt62xx/init.o
+mt62xx_ENVIRONMENTS=mtkram
+
+# Global include path
+INCLUDES=-Iinclude/ -I../../../include -I../../shared/libosmocore/include
+
+FLASH_OBJS=flash/cfi_flash.o
+
+# Objects that go in all applications
+ANY_APP_OBJS+=$(FLASH_OBJS)
+
+# Various objects that are currently linked into all applications
+ANY_APP_LIBS+=lib/libmini.a comm/libcomm.a ../../shared/libosmocore/build-target/src/.libs/libosmocore.a
+
+# Libraries are defined in subdirectories
+-include comm/Makefile
+-include lib/Makefile
+
+# Include rules
+-include Makefile.inc
diff --git a/src/target/firmware/apps/loader_mtk/main.c b/src/target/firmware/apps/loader_mtk/main.c
new file mode 100644
index 00000000..899d7651
--- /dev/null
+++ b/src/target/firmware/apps/loader_mtk/main.c
@@ -0,0 +1,366 @@
+/*
+ * boot loader for MTK phones (based on the calypso-version)
+ *
+ * (C) 2010 by Ingo Albrecht <prom@berlin.ccc.de>
+ * (C) 2011 by Wolfram Sang <wolfram@the-dreams.de>
+ *
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#include <stdint.h>
+#include <stdio.h>
+#include <string.h>
+
+#include <debug.h>
+#include <memory.h>
+#include <delay.h>
+#include <keypad.h>
+#include <board.h>
+#include <console.h>
+#include <defines.h>
+#include <manifest.h>
+
+#include <osmocom/core/crc16.h>
+
+#include <comm/sercomm.h>
+
+#include <uart.h>
+
+#include <flash/cfi_flash.h>
+
+#include <mtk/emi.h>
+#include <mtk/mt6235.h>
+#include <mtk/system.h>
+
+#include "../loader/protocol.h"
+
+/* Main Program */
+const char *hr =
+ "======================================================================\n";
+
+static void cmd_handler(uint8_t dlci, struct msgb *msg);
+
+int flag = 0;
+
+static void flush_uart(void)
+{
+ unsigned i;
+ for (i = 0; i < 500; i++) {
+ uart_poll(SERCOMM_UART_NR);
+ delay_ms(1);
+ }
+}
+
+static void device_poweroff(void)
+{
+ flush_uart();
+ writew(BBPU_MAGIC | RTC_BBPU_WRITE_EN,
+ MTK_RTC_BBPU);
+ writew(1, MTK_RTC_WRTGR);
+}
+
+static void device_reset(void)
+{
+ flush_uart();
+}
+
+static void device_enter_loader(__unused unsigned char bootrom)
+{
+ flush_uart();
+ delay_ms(2000);
+ void (*entry)( void ) = (void (*)(void))0;
+ entry();
+}
+
+static void device_jump(void *entry)
+{
+ flush_uart();
+
+ void (*f) (void) = (void (*)(void))entry;
+ f();
+}
+
+static void loader_send_simple(struct msgb *msg, uint8_t dlci, uint8_t command)
+{
+ msgb_put_u8(msg, command);
+ sercomm_sendmsg(dlci, msg);
+}
+
+extern unsigned char _start;
+
+flash_t the_flash;
+
+extern void putchar_asm(uint32_t c);
+
+static const uint8_t phone_ack[] = { 0x1b, 0xf6, 0x02, 0x00, 0x41, 0x03, 0x42 };
+
+int main(void)
+{
+ board_init ();
+
+ /* Initialize HDLC subsystem */
+ sercomm_init();
+
+ /* Say hi */
+ puts("\n\nOSMOCOM Loader (revision " GIT_REVISION ")\n");
+ puts(hr);
+
+ /* Identify environment */
+ printf("\nRunning on %s in environment %s\n", manifest_board,
+ manifest_environment);
+
+ printf("\nHW_CODE = 0x%04x", readw(MTK_CONFG_HW_CODE));
+
+ /* Set up loader communications */
+ sercomm_register_rx_cb(SC_DLCI_LOADER, &cmd_handler);
+
+ /* Wait for events */
+
+ while (1) {
+ uart_poll(SERCOMM_UART_NR);
+ }
+
+}
+
+static void cmd_handler(uint8_t dlci, struct msgb *msg)
+{
+ if (msg->data_len < 1) {
+ return;
+ }
+
+ uint8_t command = msgb_get_u8(msg);
+
+ int res;
+
+ flash_lock_t lock;
+
+ void *data;
+
+ uint8_t chip;
+ uint8_t nbytes;
+ uint16_t crc, mycrc;
+ uint32_t address;
+
+ struct msgb *reply = sercomm_alloc_msgb(256); // XXX
+
+ if (!reply) {
+ printf("Failed to allocate reply buffer!\n");
+ goto out;
+ }
+
+ switch (command) {
+
+ case LOADER_PING:
+ loader_send_simple(reply, dlci, LOADER_PING);
+ break;
+
+ case LOADER_RESET:
+ loader_send_simple(reply, dlci, LOADER_RESET);
+ device_reset();
+ break;
+
+ case LOADER_POWEROFF:
+ loader_send_simple(reply, dlci, LOADER_POWEROFF);
+ device_poweroff();
+ break;
+
+ case LOADER_ENTER_ROM_LOADER:
+ loader_send_simple(reply, dlci, LOADER_ENTER_ROM_LOADER);
+ device_enter_loader(1);
+ break;
+
+ case LOADER_ENTER_FLASH_LOADER:
+ loader_send_simple(reply, dlci, LOADER_ENTER_FLASH_LOADER);
+ device_enter_loader(0);
+ break;
+
+ case LOADER_MEM_READ:
+
+ nbytes = msgb_get_u8(msg);
+ address = msgb_get_u32(msg);
+
+ crc = crc16(0, (void *)address, nbytes);
+
+ msgb_put_u8(reply, LOADER_MEM_READ);
+ msgb_put_u8(reply, nbytes);
+ msgb_put_u16(reply, crc);
+ msgb_put_u32(reply, address);
+
+ memcpy(msgb_put(reply, nbytes), (void *)address, nbytes);
+
+ sercomm_sendmsg(dlci, reply);
+
+ break;
+
+ case LOADER_MEM_WRITE:
+
+ nbytes = msgb_get_u8(msg);
+ crc = msgb_get_u16(msg);
+ address = msgb_get_u32(msg);
+
+ data = msgb_get(msg, nbytes);
+
+ mycrc = crc16(0, data, nbytes);
+
+ if (mycrc == crc) {
+ memcpy((void *)address, data, nbytes);
+ }
+
+ msgb_put_u8(reply, LOADER_MEM_WRITE);
+ msgb_put_u8(reply, nbytes);
+ msgb_put_u16(reply, mycrc);
+ msgb_put_u32(reply, address);
+
+ sercomm_sendmsg(dlci, reply);
+
+ break;
+
+ case LOADER_JUMP:
+
+ address = msgb_get_u32(msg);
+
+ msgb_put_u8(reply, LOADER_JUMP);
+ msgb_put_u32(reply, address);
+
+ sercomm_sendmsg(dlci, reply);
+
+ device_jump((void *)address);
+
+ break;
+
+ case LOADER_FLASH_INFO:
+
+ msgb_put_u8(reply, LOADER_FLASH_INFO);
+ msgb_put_u8(reply, 1); // nchips
+
+ // chip 1
+ msgb_put_u32(reply, the_flash.f_base);
+ msgb_put_u32(reply, the_flash.f_size);
+ msgb_put_u8(reply, the_flash.f_nregions);
+
+ unsigned i;
+ for (i = 0; i < the_flash.f_nregions; i++) {
+ msgb_put_u32(reply, the_flash.f_regions[i].fr_bnum);
+ msgb_put_u32(reply, the_flash.f_regions[i].fr_bsize);
+ }
+
+ sercomm_sendmsg(dlci, reply);
+
+ break;
+
+ case LOADER_FLASH_ERASE:
+ case LOADER_FLASH_UNLOCK:
+ case LOADER_FLASH_LOCK:
+ case LOADER_FLASH_LOCKDOWN:
+
+ chip = msgb_get_u8(msg);
+ address = msgb_get_u32(msg);
+
+ if (command == LOADER_FLASH_ERASE) {
+ res = flash_block_erase(&the_flash, address);
+ }
+ if (command == LOADER_FLASH_UNLOCK) {
+ res = flash_block_unlock(&the_flash, address);
+ }
+ if (command == LOADER_FLASH_LOCK) {
+ res = flash_block_lock(&the_flash, address);
+ }
+ if (command == LOADER_FLASH_LOCKDOWN) {
+ res = flash_block_lockdown(&the_flash, address);
+ }
+
+ msgb_put_u8(reply, command);
+ msgb_put_u8(reply, chip);
+ msgb_put_u32(reply, address);
+ msgb_put_u32(reply, (res != 0));
+
+ sercomm_sendmsg(dlci, reply);
+
+ break;
+
+ case LOADER_FLASH_GETLOCK:
+
+ chip = msgb_get_u8(msg);
+ address = msgb_get_u32(msg);
+
+ lock = flash_block_getlock(&the_flash, address);
+
+ msgb_put_u8(reply, command);
+ msgb_put_u8(reply, chip);
+ msgb_put_u32(reply, address);
+
+ switch (lock) {
+ case FLASH_UNLOCKED:
+ msgb_put_u32(reply, LOADER_FLASH_UNLOCKED);
+ break;
+ case FLASH_LOCKED:
+ msgb_put_u32(reply, LOADER_FLASH_LOCKED);
+ break;
+ case FLASH_LOCKED_DOWN:
+ msgb_put_u32(reply, LOADER_FLASH_LOCKED_DOWN);
+ break;
+ default:
+ msgb_put_u32(reply, 0xFFFFFFFF);
+ break;
+ }
+
+ sercomm_sendmsg(dlci, reply);
+
+ break;
+
+ case LOADER_FLASH_PROGRAM:
+
+ nbytes = msgb_get_u8(msg);
+ crc = msgb_get_u16(msg);
+ msgb_get_u8(msg); // XXX align
+ chip = msgb_get_u8(msg);
+ address = msgb_get_u32(msg);
+
+ data = msgb_get(msg, nbytes);
+
+ mycrc = crc16(0, data, nbytes);
+
+ if (mycrc == crc) {
+ res = flash_program(&the_flash, address, data, nbytes);
+ }
+
+ msgb_put_u8(reply, LOADER_FLASH_PROGRAM);
+ msgb_put_u8(reply, nbytes);
+ msgb_put_u16(reply, mycrc);
+ msgb_put_u8(reply, 0); // XXX align
+ msgb_put_u8(reply, chip);
+ msgb_put_u32(reply, address);
+
+ msgb_put_u32(reply, (uint32_t) res); // XXX
+
+ sercomm_sendmsg(dlci, reply);
+
+ break;
+
+ default:
+ printf("unknown command %d\n", command);
+
+ msgb_free(reply);
+
+ break;
+ }
+
+ out:
+
+ msgb_free(msg);
+}
diff --git a/src/target/firmware/board/mediatek/macros.S b/src/target/firmware/board/mediatek/macros.S
new file mode 100644
index 00000000..14ee6e6a
--- /dev/null
+++ b/src/target/firmware/board/mediatek/macros.S
@@ -0,0 +1,76 @@
+
+.macro clear_bss
+ mov r0, #0
+ ldr r1, =__bss_start
+ ldr r2, =__bss_end
+loop_bss:
+ cmp r1, r2
+ strlo r0, [r1], #4
+ blo loop_bss
+.endm
+
+.macro copy_data
+ ldr r0, =__data_start
+ ldr r1, =_data_start
+ ldr r2, =__data_end
+ cmp r0, r2
+ beq done_data
+loop_data:
+ ldrb r4, [r0], #1
+ strb r4, [r1], #1
+ cmp r0, r2
+ bne loop_data
+done_data:
+.endm
+
+.macro copy_ramtext
+ ldr r0, =__ramtext_start
+ ldr r1, =_ramtext_start
+ ldr r2, =__ramtext_end
+ cmp r0, r2
+ beq done_ramtext
+loop_ramtext:
+ ldrb r4, [r0], #1
+ strb r4, [r1], #1
+ cmp r0, r2
+ bne loop_ramtext
+done_ramtext:
+.endm
+
+ .EQU ARM_MODE_FIQ, 0x11
+ .EQU ARM_MODE_IRQ, 0x12
+ .EQU ARM_MODE_SVC, 0x13
+
+ .EQU I_BIT, 0x80
+ .EQU F_BIT, 0x40
+
+#define TOP_OF_RAM 0x4000a000
+#define FIQ_STACK_SIZE 1024
+#define IRQ_STACK_SIZE 1024
+
+.macro init_stacks
+ /* initialize stacks, starting at TOP_OF_RAM */
+ ldr r0, =TOP_OF_RAM
+
+ /* initialize FIQ stack */
+ msr CPSR_c, #ARM_MODE_FIQ | I_BIT | F_BIT
+ mov r13, r0
+ sub r0, r0, #FIQ_STACK_SIZE
+
+ /* initialize IRQ stack */
+ msr CPSR_c, #ARM_MODE_IRQ | I_BIT | F_BIT
+ mov r13, r0
+ sub r0, r0, #IRQ_STACK_SIZE
+
+ /* initialize supervisor stack */
+ msr CPSR_c, #ARM_MODE_SVC | I_BIT | F_BIT
+ mov r13, r0
+.endm
+
+.macro call_ctors
+ /* call constructor functions */
+ ldr r0, =_ctor_start
+ ldr r1, =_ctor_end
+ bl do_global_ctors
+.endm
+
diff --git a/src/target/firmware/board/mediatek/ram.lds b/src/target/firmware/board/mediatek/ram.lds
new file mode 100644
index 00000000..465c0ba9
--- /dev/null
+++ b/src/target/firmware/board/mediatek/ram.lds
@@ -0,0 +1,112 @@
+/*
+ * Linker script for running from internal SRAM on MTK phones
+ *
+ * This script is tailored specifically to the requirements imposed
+ * on us by the Mediatek bootloader.
+ *
+ */
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+MEMORY
+{
+ /* mtk-loaded binary: our text, initialized data */
+ LRAM (rw) : ORIGIN = 0x40000000, LENGTH = 0x00005000
+ /* mtk-loaded binary: our unitialized data, stacks, heap */
+ IRAM (rw) : ORIGIN = 0x40005000, LENGTH = 0x00005000
+}
+SECTIONS
+{
+ . = 0x40000000;
+
+ /* romloader data section, contains passthru interrupt vectors */
+ .mtk.loader (NOLOAD) : { . = 0x1400; } > LRAM
+
+ /* initialization code */
+ . = ALIGN(4);
+ .text.start : {
+ PROVIDE(_start = .);
+ KEEP(*(.text.start))
+ *(.text.start)
+ } > LRAM
+
+ /* code */
+ . = ALIGN(4);
+ .text (LOADADDR(.text.start) + SIZEOF(.text.start)) :
+ AT (LOADADDR(.text.start) + SIZEOF(.text.start)) {
+ /* regular code */
+ *(.text*)
+ /* always-in-ram code */
+ *(.ramtext*)
+ /* gcc voodoo */
+ *(.glue_7t) *(.glue_7) *(.vfp11_veneer) *(.v4_bx)
+ . = ALIGN(4);
+ } > LRAM
+ PROVIDE(_text_start = LOADADDR(.text));
+ PROVIDE(_text_end = LOADADDR(.text) + SIZEOF(.text));
+
+ /* constructor pointers */
+ .ctors : {
+ /* ctor count */
+ LONG(SIZEOF(.ctors) / 4 - 2)
+ /* ctor pointers */
+ KEEP(*(SORT(.ctors)))
+ /* end of list */
+ LONG(0)
+ } > LRAM
+ PROVIDE(_ctor_start = LOADADDR(.ctors));
+ PROVIDE(_ctor_end = LOADADDR(.ctors) + SIZEOF(.ctors));
+
+ /* destructor pointers */
+ .dtors : {
+ /* dtor count */
+ LONG(SIZEOF(.dtors) / 4 - 2)
+ /* dtor pointers */
+ KEEP(*(SORT(.dtors)))
+ /* end of list */
+ LONG(0)
+ } > LRAM
+ PROVIDE(_dtor_start = LOADADDR(.dtors));
+ PROVIDE(_dtor_end = LOADADDR(.dtors) + SIZEOF(.dtors));
+
+ /* read-only data */
+ . = ALIGN(4);
+ .rodata : {
+ *(.rodata*)
+ } > LRAM
+ PROVIDE(_rodata_start = LOADADDR(.rodata));
+ PROVIDE(_rodata_end = LOADADDR(.rodata) + SIZEOF(.rodata));
+
+ /* initialized data */
+ . = ALIGN(4);
+ .data : {
+ *(.data)
+ } > LRAM
+ PROVIDE(_data_start = LOADADDR(.data));
+ PROVIDE(_data_end = LOADADDR(.data) + SIZEOF(.data));
+
+ /* pic offset tables */
+ . = ALIGN(4);
+ .got : {
+ *(.got)
+ *(.got.plt) *(.igot.plt) *(.got) *(.igot)
+ } > LRAM
+ PROVIDE(_got_start = LOADADDR(.got));
+ PROVIDE(_got_end = LOADADDR(.got) + SIZEOF(.got));
+
+ /* uninitialized data */
+ .bss (NOLOAD) : {
+ . = ALIGN(4);
+ __bss_start = .;
+ *(.bss)
+ } > IRAM
+ . = ALIGN(4);
+ __bss_end = .;
+ PROVIDE(_bss_start = __bss_start);
+ PROVIDE(_bss_end = __bss_end);
+
+ /* end of image */
+ . = ALIGN(4);
+ _end = .;
+ PROVIDE(end = .);
+}
diff --git a/src/target/firmware/board/mediatek/start.ram.S b/src/target/firmware/board/mediatek/start.ram.S
new file mode 100644
index 00000000..c8f242c0
--- /dev/null
+++ b/src/target/firmware/board/mediatek/start.ram.S
@@ -0,0 +1,26 @@
+
+.section .text.start
+
+#include "macros.S"
+
+.globl _start
+_start:
+ /* clear bss section */
+ clear_bss
+
+ /* initialize all stacks */
+ init_stacks
+
+ /* call constructors */
+ call_ctors
+
+ /* jump to main */
+ ldr pc, _jump_main
+
+ /* endless loop at end of program */
+_loop:
+ b _loop
+ b _start
+
+_jump_main:
+ .word main
diff --git a/src/target/firmware/board/mediatek/uart.c b/src/target/firmware/board/mediatek/uart.c
new file mode 100644
index 00000000..ff82245e
--- /dev/null
+++ b/src/target/firmware/board/mediatek/uart.c
@@ -0,0 +1,426 @@
+/* MediaTek MT62xx internal UART Driver
+ *
+ * based on the Calypso driver, so there might be some cruft from it left...
+ *
+ * (C) 2010 by Harald Welte <laforge@gnumonks.org>
+ * (C) 2010 by Ingo Albrecht <prom@berlin.ccc.de>
+ * (C) 2010 by Steve Markgraf <steve@steve-m.de>
+ * (C) 2011 by Wolfram Sang <wolfram@the-dreams.de>
+ *
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#include <debug.h>
+#include <memory.h>
+#include <stdint.h>
+#include <string.h>
+#include <stdio.h>
+#include <defines.h>
+#include <uart.h>
+#include <console.h>
+
+#include <comm/sercomm.h>
+
+#include <calypso/irq.h>
+
+/* MT622x */
+#if 0
+#define BASE_ADDR_UART1 0x80130000
+#define BASE_ADDR_UART2 0x80180000
+#define BASE_ADDR_UART3 0x801b0000
+#endif
+
+/* MT 6235 */
+#define BASE_ADDR_UART1 0x81030000
+
+//TODO make UART2 and 3 work
+#define UART_REG(n,m) (BASE_ADDR_UART1 + (m))
+
+#define LCR7BIT 0x80
+#define LCRBFBIT 0x40
+#define MCR6BIT 0x20
+#define REG_OFFS(m) ((m) & ~(LCR7BIT|LCRBFBIT|MCR6BIT))
+/* read access LCR[7] = 0 */
+enum uart_reg {
+ RBR = 0x00,
+ IER = 0x04,
+ IIR = 0x08,
+ LCR = 0x0c,
+ MCR = 0x10,
+ LSR = 0x14,
+ MSR = 0x18,
+ SCR = 0x1c,
+ AUTOBAUD_EN = 0x20,
+ HIGHSPEED = 0x24,
+ SAMPLE_COUNT = 0x28,
+ SAMPLE_POINT = 0x2c,
+ AUTOBAUD_REG = 0x30,
+ RATE_FIX_REG = 0x34, /* undocumented */
+ AUTOBAUDSAMPLE = 0x38,
+ GUARD = 0x3c,
+ ESCAPE_DAT = 0x40,
+ ESCAPE_EN = 0x44,
+ SLEEP_EN = 0x48,
+ VFIFO_EN = 0x4c,
+/* read access LCR[7] = 1 */
+ DLL = RBR,
+ DLH = IER,
+/* read/write access LCR[7:0] = 0xbf */
+ EFR = IIR | LCRBFBIT,
+ XON1 = MCR | LCRBFBIT,
+ XON2 = LSR | LCRBFBIT,
+ XOFF1 = MSR | LCRBFBIT,
+ XOFF2 = SCR | LCRBFBIT,
+};
+
+enum fcr_bits {
+ FIFO_EN = (1 << 0),
+ RX_FIFO_CLEAR = (1 << 1),
+ TX_FIFO_CLEAR = (1 << 2),
+ DMA_MODE = (1 << 3),
+};
+#define TX_FIFO_TRIG_SHIFT 4
+#define RX_FIFO_TRIG_SHIFT 6
+
+enum iir_bits {
+ IIR_INT_PENDING = 0x01,
+ IIR_INT_TYPE = 0x3E,
+ IIR_INT_TYPE_RX_STATUS_ERROR = 0x06,
+ IIR_INT_TYPE_RX_TIMEOUT = 0x0C,
+ IIR_INT_TYPE_RBR = 0x04,
+ IIR_INT_TYPE_THR = 0x02,
+ IIR_INT_TYPE_MSR = 0x00,
+ IIR_INT_TYPE_XOFF = 0x10,
+ IIR_INT_TYPE_FLOW = 0x20,
+ IIR_FCR0_MIRROR = 0xC0,
+};
+
+
+/* enable or disable the divisor latch for access to DLL, DLH */
+static void uart_set_lcr7bit(int uart, int on)
+{
+ uint8_t reg;
+
+ reg = readb(UART_REG(uart, LCR));
+ if (on)
+ reg |= (1 << 7);
+ else
+ reg &= ~(1 << 7);
+ writeb(reg, UART_REG(uart, LCR));
+}
+
+static uint8_t old_lcr;
+static void uart_set_lcr_bf(int uart, int on)
+{
+ if (on) {
+ old_lcr = readb(UART_REG(uart, LCR));
+ writeb(0xBF, UART_REG(uart, LCR));
+ } else {
+ writeb(old_lcr, UART_REG(uart, LCR));
+ }
+}
+
+/* Enable or disable the TCR_TLR latch bit in MCR[6] */
+static void uart_set_mcr6bit(int uart, int on)
+{
+ uint8_t mcr;
+ /* we assume EFR[4] is always set to 1 */
+ mcr = readb(UART_REG(uart, MCR));
+ if (on)
+ mcr |= (1 << 6);
+ else
+ mcr &= ~(1 << 6);
+ writeb(mcr, UART_REG(uart, MCR));
+}
+
+static void uart_reg_write(int uart, enum uart_reg reg, uint8_t val)
+{
+ if (reg & LCRBFBIT)
+ uart_set_lcr_bf(uart, 1);
+ else if (reg & LCR7BIT)
+ uart_set_lcr7bit(uart, 1);
+ else if (reg & MCR6BIT)
+ uart_set_mcr6bit(uart, 1);
+
+ writeb(val, UART_REG(uart, REG_OFFS(reg)));
+
+ if (reg & LCRBFBIT)
+ uart_set_lcr_bf(uart, 0);
+ else if (reg & LCR7BIT)
+ uart_set_lcr7bit(uart, 0);
+ else if (reg & MCR6BIT)
+ uart_set_mcr6bit(uart, 0);
+}
+
+/* read from a UART register, applying any required latch bits */
+static uint8_t uart_reg_read(int uart, enum uart_reg reg)
+{
+ uint8_t ret;
+
+ if (reg & LCRBFBIT)
+ uart_set_lcr_bf(uart, 1);
+ else if (reg & LCR7BIT)
+ uart_set_lcr7bit(uart, 1);
+ else if (reg & MCR6BIT)
+ uart_set_mcr6bit(uart, 1);
+
+ ret = readb(UART_REG(uart, REG_OFFS(reg)));
+
+ if (reg & LCRBFBIT)
+ uart_set_lcr_bf(uart, 0);
+ else if (reg & LCR7BIT)
+ uart_set_lcr7bit(uart, 0);
+ else if (reg & MCR6BIT)
+ uart_set_mcr6bit(uart, 0);
+
+ return ret;
+}
+
+static void uart_irq_handler_cons(__unused int irqnr)
+{
+ const uint8_t uart = CONS_UART_NR;
+ uint8_t iir;
+
+ //uart_putchar_nb(uart, 'U');
+
+ iir = uart_reg_read(uart, IIR);
+ if (iir & IIR_INT_PENDING)
+ return;
+
+ switch (iir & IIR_INT_TYPE) {
+ case IIR_INT_TYPE_RBR:
+ break;
+ case IIR_INT_TYPE_THR:
+ if (cons_rb_flush() == 1) {
+ /* everything was flushed, disable RBR IRQ */
+ uint8_t ier = uart_reg_read(uart, IER);
+ ier &= ~(1 << 1);
+ uart_reg_write(uart, IER, ier);
+ }
+ break;
+ case IIR_INT_TYPE_MSR:
+ break;
+ case IIR_INT_TYPE_RX_STATUS_ERROR:
+ break;
+ case IIR_INT_TYPE_RX_TIMEOUT:
+ break;
+ case IIR_INT_TYPE_XOFF:
+ break;
+ }
+}
+
+static void uart_irq_handler_sercomm(__unused int irqnr)
+{
+ const uint8_t uart = SERCOMM_UART_NR;
+ uint8_t iir, ch;
+
+ //uart_putchar_nb(uart, 'U');
+
+ iir = uart_reg_read(uart, IIR);
+ if (iir & IIR_INT_PENDING)
+ return;
+
+ switch (iir & IIR_INT_TYPE) {
+ case IIR_INT_TYPE_RX_TIMEOUT:
+ case IIR_INT_TYPE_RBR:
+ /* as long as we have rx data available */
+ while (uart_getchar_nb(uart, &ch)) {
+ if (sercomm_drv_rx_char(ch) < 0) {
+ /* sercomm cannot receive more data right now */
+ uart_irq_enable(uart, UART_IRQ_RX_CHAR, 0);
+ }
+ }
+ break;
+ case IIR_INT_TYPE_THR:
+ /* as long as we have space in the FIFO */
+ while (!uart_tx_busy(uart)) {
+ /* get a byte from sercomm */
+ if (!sercomm_drv_pull(&ch)) {
+ /* no more bytes in sercomm, stop TX interrupts */
+ uart_irq_enable(uart, UART_IRQ_TX_EMPTY, 0);
+ break;
+ }
+ /* write the byte into the TX FIFO */
+ uart_putchar_nb(uart, ch);
+ }
+ break;
+ case IIR_INT_TYPE_MSR:
+ printf("UART IRQ MSR\n");
+ break;
+ case IIR_INT_TYPE_RX_STATUS_ERROR:
+ printf("UART IRQ RX_SE\n");
+ break;
+ case IIR_INT_TYPE_XOFF:
+ printf("UART IRQXOFF\n");
+ break;
+ }
+}
+
+void uart_init(uint8_t uart, __unused uint8_t interrupts)
+{
+ /* no interrupts, only polling so far */
+
+ uart_reg_write(uart, IER, 0x00);
+ if (uart == CONS_UART_NR) {
+ cons_init();
+ } else {
+ sercomm_init();
+ uart_irq_enable(uart, UART_IRQ_RX_CHAR, 1);
+ }
+
+ uart_reg_write(uart, AUTOBAUD_EN, 0x00); /* disable AUTOBAUD */
+ uart_reg_write(uart, EFR, 0x10); /* Enhanced Features Register */
+
+ /* no XON/XOFF flow control, ENHANCED_EN, no auto-RTS/CTS */
+ uart_reg_write(uart, EFR, (1 << 4));
+ /* enable Tx/Rx FIFO, Tx trigger at 56 spaces, Rx trigger at 60 chars */
+ //FIXME check those FIFO settings
+ uart_reg_write(uart, IIR, FIFO_EN | RX_FIFO_CLEAR | TX_FIFO_CLEAR |
+ (3 << TX_FIFO_TRIG_SHIFT) | (1 << RX_FIFO_TRIG_SHIFT));
+
+ /* RBR interrupt only when TX FIFO and TX shift register are empty */
+ uart_reg_write(uart, SCR, (1 << 0));// | (1 << 3));
+
+ /* 8 bit, 1 stop bit, no parity, no break */
+ uart_reg_write(uart, LCR, 0x03);
+
+ uart_set_lcr7bit(uart, 0);
+}
+
+void uart_poll(uint8_t uart) {
+ if(uart == CONS_UART_NR) {
+ uart_irq_handler_cons(0);
+ } else {
+ uart_irq_handler_sercomm(0);
+ }
+}
+
+void uart_irq_enable(uint8_t uart, enum uart_irq irq, int on)
+{
+ uint8_t ier = uart_reg_read(uart, IER);
+ uint8_t mask = 0;
+
+ switch (irq) {
+ case UART_IRQ_TX_EMPTY:
+ mask = (1 << 1);
+ break;
+ case UART_IRQ_RX_CHAR:
+ mask = (1 << 0);
+ break;
+ }
+
+ if (on)
+ ier |= mask;
+ else
+ ier &= ~mask;
+
+ uart_reg_write(uart, IER, ier);
+}
+
+
+void uart_putchar_wait(uint8_t uart, int c)
+{
+ /* wait while TX FIFO indicates full */
+ while (~readb(UART_REG(uart, LSR)) & 0x20) { }
+
+ /* put character in TX FIFO */
+ writeb(c, UART_REG(uart, RBR));
+}
+
+int uart_putchar_nb(uint8_t uart, int c)
+{
+ /* if TX FIFO indicates full, abort */
+ if (~readb(UART_REG(uart, LSR)) & 0x20)
+ return 0;
+
+ writeb(c, UART_REG(uart, RBR));
+ return 1;
+}
+
+int uart_getchar_nb(uint8_t uart, uint8_t *ch)
+{
+ uint8_t lsr;
+
+ lsr = readb(UART_REG(uart, LSR));
+
+ /* something strange happened */
+ if (lsr & 0x02)
+ printf("LSR RX_OE\n");
+ if (lsr & 0x04)
+ printf("LSR RX_PE\n");
+ if (lsr & 0x08)
+ printf("LSR RX_FE\n");
+ if (lsr & 0x10)
+ printf("LSR RX_BI\n");
+ if (lsr & 0x80)
+ printf("LSR RX_FIFO_STS\n");
+
+ /* is the Rx FIFO empty? */
+ if (!(lsr & 0x01))
+ return 0;
+
+ *ch = readb(UART_REG(uart, RBR));
+ //printf("getchar_nb(%u) = %02x\n", uart, *ch);
+ return 1;
+}
+
+int uart_tx_busy(uint8_t uart)
+{
+ /* Check THRE bit (LSR[5]) to see if FIFO is full */
+ if (~readb(UART_REG(uart, LSR)) & 0x20)
+ return 1;
+ return 0;
+}
+
+#if 0
+/* 26MHz clock input (used when no PLL initialized directly after poweron) */
+static const uint16_t divider[] = {
+ [UART_38400] = 42,
+ [UART_57600] = 28,
+ [UART_115200] = 14,
+ [UART_230400] = 7,
+ [UART_460800] = 14, /* would need UART_REG(HIGHSPEED) = 1 or 2 */
+ [UART_921600] = 7, /* would need UART_REG(HIGHSPEED) = 2 */
+};
+#endif
+
+/* 52MHz clock input (after PLL init) */
+static const uint16_t divider[] = {
+ [UART_38400] = 85,
+ [UART_57600] = 56,
+ [UART_115200] = 28,
+ [UART_230400] = 14,
+ [UART_460800] = 7,
+ [UART_921600] = 7, /* would need UART_REG(HIGHSPEED) = 1 */
+};
+
+int uart_baudrate(uint8_t uart, enum uart_baudrate bdrt)
+{
+ uint16_t div;
+
+ if (bdrt > ARRAY_SIZE(divider))
+ return -1;
+
+ div = divider[bdrt];
+ uart_set_lcr7bit(uart, 1);
+ writeb(div & 0xff, UART_REG(uart, DLL));
+ writeb(div >> 8, UART_REG(uart, DLH));
+ uart_set_lcr7bit(uart, 0);
+
+ return 0;
+}
diff --git a/src/target/firmware/board/mt62xx/init.c b/src/target/firmware/board/mt62xx/init.c
new file mode 100644
index 00000000..3f683757
--- /dev/null
+++ b/src/target/firmware/board/mt62xx/init.c
@@ -0,0 +1,139 @@
+/* Initialization for the MT62xx Basebands */
+
+/* (C) 2010 by Steve Markgraf <steve@steve-m.de>
+ *
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#include <stdint.h>
+#include <stdio.h>
+
+#include <debug.h>
+#include <ctors.h>
+#include <memory.h>
+#include <board.h>
+#include <keypad.h>
+#include <uart.h>
+#include <console.h>
+#include <delay.h>
+
+#include <flash/cfi_flash.h>
+
+#include <comm/sercomm.h>
+#include <comm/timer.h>
+
+#include <mtk/emi.h>
+#include <mtk/mt6235.h>
+#include <mtk/system.h>
+
+void pll_init(void)
+{
+ /* Power on PLL */
+ writew(0, MTK_PLL_PDN_CON);
+ writew(PLL_CLKSQ_DIV2_DSP | PLL_CLKSQ_DIV2_MCU, MTK_PLL_CLK_CON);
+
+ writew(PLL_RST, MTK_PLL_PLL);
+ writew(0, MTK_PLL_PLL);
+ delay_ms(1);
+
+ /* Turn on PLL for MCU, DSP and USB */
+ writew(PLL_MPLLSEL_PLL | PLL_DPLLSEL | PLL_UPLLSEL, MTK_PLL_PLL);
+
+ /*
+ * Setup MCU clock register:
+ * ARMCLK = 208MHz, AHBx4CLK = 52MHz, AHBx8CLK = 104MHz
+ * we have to write to the read-only part (EMICLK) as well, otherwise
+ * the EMI won't work! (datasheet lies)
+ */
+ writew(7 << MCUCLK_CON_AHBX8CLK_SHIFT |
+ 3 << MCUCLK_CON_AHBX4CLK_SHIFT |
+ 15 << MCUCLK_CON_ARMCLK_SHIFT |
+ 7 << MCUCLK_CON_EMICLK_SHIFT,
+ MTK_CONFG_MCUCLK_CON);
+}
+
+void memory_init(void)
+{
+ int i;
+
+ /* Initialization for Hynix RAM */
+
+ /* Configure DRAM controller */
+ writel(0x0001000e, MTK_EMI_GEND);
+ writel(0x00088a0a, MTK_EMI_GENA);
+ writel(0x00000280, MTK_EMI_GENB);
+ writel(0x52945294, MTK_EMI_GENC);
+ writel(0x1c016605, MTK_EMI_CONL);
+ writel(0x00002828, MTK_EMI_CONM);
+ writel(0x02334000, MTK_EMI_CONI);
+ writel(0x16c12212, MTK_EMI_CONJ);
+ writel(0x032d0000, MTK_EMI_CONK);
+
+ for (i = 0; i < 5; ++i) {
+ /* Setup five single bits, one by one for DRAM init */
+ writel((1 << (24 + i)) | (0x400013), MTK_EMI_CONN);
+ delay_ms(1);
+ writel(0x400013, MTK_EMI_CONN);
+ delay_ms(1);
+ }
+
+#if 0
+ /* Initialization for Toshiba RAM */
+
+ /* Configure DRAM controller */
+ writel(0x0001000E, MTK_EMI_GEND);
+ writel(0x00088E3A, MTK_EMI_GENA);
+ writel(0x000000C0, MTK_EMI_GENB);
+ writel(0x18C618C6, MTK_EMI_GENC);
+ writel(0x18007505, MTK_EMI_CONL);
+ writel(0x00002828, MTK_EMI_CONM);
+ writel(0x00332000, MTK_EMI_CONI);
+ writel(0x3CD24431, MTK_EMI_CONJ);
+ writel(0x02000000, MTK_EMI_CONK);
+
+ for (i = 0; i < 5; ++i) {
+ /* Setup five single bits, one by one for DRAM init */
+ writel((1 << (24 + i)) | (0x500013), MTK_EMI_CONN);
+ delay_ms(1);
+ writel(0x500013, MTK_EMI_CONN);
+ delay_ms(1);
+ }
+
+#endif
+}
+
+void board_init(void)
+{
+ /* powerup the baseband */
+ writew(POWERKEY1_MAGIC, MTK_RTC_POWERKEY1);
+ writew(POWERKEY2_MAGIC, MTK_RTC_POWERKEY2);
+ writew(BBPU_MAGIC | RTC_BBPU_WRITE_EN |
+ RTC_BBPU_BBPU | RTC_BBPU_AUTO,
+ MTK_RTC_BBPU);
+ writew(1, MTK_RTC_WRTGR);
+
+ /* disable watchdog timer */
+ writew(WDT_MODE_KEY, MTK_RGU_WDT_MODE);
+
+ pll_init();
+ memory_init();
+
+ /* Initialize UART without interrupts */
+ uart_init(SERCOMM_UART_NR, 0);
+ uart_baudrate(SERCOMM_UART_NR, UART_115200);
+}
diff --git a/src/target/firmware/include/mtk/emi.h b/src/target/firmware/include/mtk/emi.h
new file mode 100644
index 00000000..18184992
--- /dev/null
+++ b/src/target/firmware/include/mtk/emi.h
@@ -0,0 +1,42 @@
+/*
+ * (C) 2010 by Tieto <www.tieto.com>
+ * Marcin Mielczarczyk <marcin.mielczarczyk@tieto.com>
+ *
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#ifndef __MTK_EMI_H_
+#define __MTK_EMI_H_
+
+/* External Memory Interface register definitions */
+#define MTK_EMI_CONA (MTK_EMI_BASE + 0x00)
+#define MTK_EMI_CONB (MTK_EMI_BASE + 0x08)
+#define MTK_EMI_CONC (MTK_EMI_BASE + 0x10)
+#define MTK_EMI_COND (MTK_EMI_BASE + 0x18)
+#define MTK_EMI_CONI (MTK_EMI_BASE + 0x40)
+#define MTK_EMI_CONJ (MTK_EMI_BASE + 0x48)
+#define MTK_EMI_CONK (MTK_EMI_BASE + 0x50)
+#define MTK_EMI_CONL (MTK_EMI_BASE + 0x58)
+#define MTK_EMI_CONM (MTK_EMI_BASE + 0x60)
+#define MTK_EMI_CONN (MTK_EMI_BASE + 0x68)
+#define MTK_EMI_GENA (MTK_EMI_BASE + 0x70)
+#define MTK_EMI_GENB (MTK_EMI_BASE + 0x78)
+#define MTK_EMI_GENC (MTK_EMI_BASE + 0x80)
+#define MTK_EMI_GEND (MTK_EMI_BASE + 0x88)
+
+#endif
diff --git a/src/target/firmware/include/mtk/mt6235.h b/src/target/firmware/include/mtk/mt6235.h
new file mode 100644
index 00000000..fb9d368e
--- /dev/null
+++ b/src/target/firmware/include/mtk/mt6235.h
@@ -0,0 +1,74 @@
+/*
+ * (C) 2010 by Tieto <www.tieto.com>
+ * Marcin Mielczarczyk <marcin.mielczarczyk@tieto.com>
+ *
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#ifndef __MT6235_H
+#define __MT6235_H
+
+/* Peripheral base addresses */
+#define MTK_EFUSE_BASE 0x80000000
+#define MTK_CONFG_BASE 0x80010000
+#define MTK_GPIO_BASE 0x80020000
+#define MTK_RGU_BASE 0x80030000
+#define MTK_EMI_BASE 0x81000000
+#define MTK_CIRQ_BASE 0x81010000
+#define MTK_DMA_BASE 0x81020000
+#define MTK_UART1_BASE 0x81030000
+#define MTK_UART2_BASE 0x81040000
+#define MTK_UART3_BASE 0x81050000
+#define MTK_GPT_BASE 0x81060000
+#define MTK_KP_BASE 0x81080000
+#define MTK_PWM_BASE 0x81090000
+#define MTK_SIM_BASE 0x810A0000
+#define MTK_RTC_BASE 0x810C0000
+#define MTK_SEJ_BASE 0x810D0000
+#define MTK_BM_BASE 0x810E0000
+#define MTK_IRDA_BASE 0x810F0000
+#define MTK_I2C_BASE 0x81100000
+#define MTK_MSDC_BASE 0x81110000
+#define MTK_NFI_BASE 0x81120000
+#define MTK_MSSDC2_BASE 0x81140000
+#define MTK_TDMA_BASE 0x82000000
+#define MTK_BSI_BASE 0x82010000
+#define MTK_BPI_BASE 0x82020000
+#define MTK_AFC_BASE 0x82030000
+#define MTK_APC_BASE 0x82040000
+#define MTK_AUXADC_BASE 0x82050000
+#define MTK_DIVIDER_BASE 0x82060000
+#define MTK_FSC_BASE 0x82070000
+#define MTK_GCU_BASE 0x82080000
+#define MTK_CSD_ACC_BASE 0x82090000
+#define MTK_SHARE1_BASE 0x820A0000
+#define MTK_IRDBG1_BASE 0x820B0000
+#define MTK_SHARE2_BASE 0x820C0000
+#define MTK_IRDBG2_BASE 0x820D0000
+#define MTK_PATCH_BASE 0x820E0000
+#define MTK_AFE_BASE 0x820F0000
+#define MTK_BFE_BASE 0x82100000
+#define MTK_PLL_BASE 0x83000000
+#define MTK_ACIF_BASE 0x83010000
+#define MTK_GMC_BASE 0x84000000
+#define MTK_G2D_BASE 0x84010000
+#define MTK_GCMQ_BASE 0x84020000
+#define MTK_CAM_BASE 0x840B0000
+#define MTK_CRZ_BASE 0x840E0000
+
+#endif
diff --git a/src/target/firmware/include/mtk/system.h b/src/target/firmware/include/mtk/system.h
new file mode 100644
index 00000000..45430291
--- /dev/null
+++ b/src/target/firmware/include/mtk/system.h
@@ -0,0 +1,195 @@
+/*
+ * (C) 2010 by Tieto <www.tieto.com>
+ * Marcin Mielczarczyk <marcin.mielczarczyk@tieto.com>
+ *
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#ifndef __MTK_SYSTEM_H_
+#define __MTK_SYSTEM_H_
+
+/*
+ * Configuration block section (Clock, Power Down, Version and Reset
+ */
+
+/* Register definitions */
+#define MTK_CONFG_HW_VERSION (MTK_CONFG_BASE + 0x000)
+#define MTK_CONFG_FW_VERSION (MTK_CONFG_BASE + 0x004)
+#define MTK_CONFG_HW_CODE (MTK_CONFG_BASE + 0x008)
+#define MTK_CONFG_SLEEP_CON (MTK_CONFG_BASE + 0x114)
+#define MTK_CONFG_MCUCLK_CON (MTK_CONFG_BASE + 0x118)
+#define MTK_CONFG_DSPCLK_CON (MTK_CONFG_BASE + 0x11C)
+#define MTK_CONFG_IDN_SEL (MTK_CONFG_BASE + 0x200)
+#define MTK_CONFG_PDN_CON0 (MTK_CONFG_BASE + 0x300)
+#define MTK_CONFG_PDN_CON1 (MTK_CONFG_BASE + 0x304)
+#define MTK_CONFG_PDN_CON2 (MTK_CONFG_BASE + 0x308)
+#define MTK_CONFG_PDN_CON3 (MTK_CONFG_BASE + 0x30C)
+#define MTK_CONFG_PDN_SET0 (MTK_CONFG_BASE + 0x310)
+#define MTK_CONFG_PDN_SET1 (MTK_CONFG_BASE + 0x314)
+#define MTK_CONFG_PDN_SET2 (MTK_CONFG_BASE + 0x318)
+#define MTK_CONFG_PDN_SET3 (MTK_CONFG_BASE + 0x31C)
+#define MTK_CONFG_PDN_CLR0 (MTK_CONFG_BASE + 0x320)
+#define MTK_CONFG_PDN_CLR1 (MTK_CONFG_BASE + 0x324)
+#define MTK_CONFG_PDN_CLR2 (MTK_CONFG_BASE + 0x328)
+#define MTK_CONFG_PDN_CLR3 (MTK_CONFG_BASE + 0x32C)
+
+/* CONFG_MCUCLK_CON bit fields definitions */
+#define MCUCLK_CON_AHBX8CLK_SHIFT (0)
+#define MCUCLK_CON_AHBX4CLK_SHIFT (4)
+#define MCUCLK_CON_ARMCLK_SHIFT (8)
+#define MCUCLK_CON_EMICLK_SHIFT (12)
+
+/* PDN_CON0 bit fields definitions */
+#define PDN_CON0_CON0_DMA (1 << 0)
+#define PDN_CON0_USB (1 << 1)
+#define PDN_CON0_GCU (1 << 2)
+#define PDN_CON0_WAVE (1 << 3)
+#define PDN_CON0_SEJ (1 << 4)
+#define PDN_CON0_IR (1 << 6)
+#define PDN_CON0_PWM3 (1 << 7)
+#define PDN_CON0_PWM (1 << 8)
+#define PDN_CON0_SIM2 (1 << 10)
+#define PDN_CON0_IRDBG1 (1 << 12)
+#define PDN_CON0_IRDBG2 (1 << 13)
+
+/* PDN_CON1 bit fields definitions */
+#define PDN_CON1_GPT (1 << 0)
+#define PDN_CON1_KP (1 << 1)
+#define PDN_CON1_GPIO (1 << 2)
+#define PDN_CON1_UART1 (1 << 3)
+#define PDN_CON1_SIM (1 << 4)
+#define PDN_CON1_PWM1 (1 << 5)
+#define PDN_CON1_LCD (1 << 7)
+#define PDN_CON1_UART2 (1 << 8)
+#define PDN_CON1_MSDC (1 << 9)
+#define PDN_CON1_TP (1 << 10)
+#define PDN_CON1_PWM2 (1 << 11)
+#define PDN_CON1_NFI (1 << 12)
+#define PDN_CON1_UART3 (1 << 14)
+#define PDN_CON1_IRDA (1 << 15)
+
+/* PDN_CON2 bit fields definitions */
+#define PDN_CON2_TDMA (1 << 0)
+#define PDN_CON2_RTC (1 << 1)
+#define PDN_CON2_BSI (1 << 2)
+#define PDN_CON2_BPI (1 << 3)
+#define PDN_CON2_AFC (1 << 4)
+#define PDN_CON2_APC (1 << 5)
+
+/*
+ * Reset Generation Unit block section
+ */
+#define MTK_RGU_WDT_MODE (MTK_RGU_BASE + 0x00)
+#define MTK_RGU_WDT_LENGTH (MTK_RGU_BASE + 0x04)
+#define MTK_RGU_WDT_RESTART (MTK_RGU_BASE + 0x08)
+#define MTK_RGU_WDT_STA (MTK_RGU_BASE + 0x0C)
+#define MTK_RGU_SW_PERIPH_RSTN (MTK_RGU_BASE + 0x10)
+#define MTK_RGU_SW_DSP_RSTN (MTK_RGU_BASE + 0x14)
+#define MTK_RGU_WDT_RSTINTERVAL (MTK_RGU_BASE + 0x18)
+#define MTK_RGU_WDT_SWRST (MTK_RGU_BASE + 0x1C)
+
+#define WDT_MODE_KEY 0x2200
+#define WDT_LENGTH_KEY 0x0008
+#define WDT_RESTART_KEY 0x1971
+#define SW_PERIPH_RSTN_KEY 0x0037
+#define WDT_SWRST_KEY 0x1209
+
+/*
+ * RTC block section
+ */
+
+/* RTC registers definition */
+#define MTK_RTC_BBPU (MTK_RTC_BASE + 0x00)
+#define MTK_RTC_IRQ_STA (MTK_RTC_BASE + 0x04)
+#define MTK_RTC_IRQ_EN (MTK_RTC_BASE + 0x08)
+#define MTK_RTC_CII_EN (MTK_RTC_BASE + 0x0C)
+#define MTK_RTC_AL_MASK (MTK_RTC_BASE + 0x10)
+#define MTK_RTC_TC_SEC (MTK_RTC_BASE + 0x14)
+#define MTK_RTC_TC_MIN (MTK_RTC_BASE + 0x18)
+#define MTK_RTC_TC_HOU (MTK_RTC_BASE + 0x1C)
+#define MTK_RTC_TC_DOM (MTK_RTC_BASE + 0x20)
+#define MTK_RTC_TC_DOW (MTK_RTC_BASE + 0x24)
+#define MTK_RTC_TC_MTH (MTK_RTC_BASE + 0x28)
+#define MTK_RTC_TC_YEA (MTK_RTC_BASE + 0x2C)
+#define MTK_RTC_AL_SEC (MTK_RTC_BASE + 0x30)
+#define MTK_RTC_AL_MIN (MTK_RTC_BASE + 0x34)
+#define MTK_RTC_AL_HOU (MTK_RTC_BASE + 0x38)
+#define MTK_RTC_AL_DOM (MTK_RTC_BASE + 0x3C)
+#define MTK_RTC_AL_DOW (MTK_RTC_BASE + 0x40)
+#define MTK_RTC_AL_MTH (MTK_RTC_BASE + 0x44)
+#define MTK_RTC_AL_YEA (MTK_RTC_BASE + 0x48)
+#define MTK_RTC_XOSCCALI (MTK_RTC_BASE + 0x4C)
+#define MTK_RTC_POWERKEY1 (MTK_RTC_BASE + 0x50)
+#define MTK_RTC_POWERKEY2 (MTK_RTC_BASE + 0x54)
+#define MTK_RTC_PDN1 (MTK_RTC_BASE + 0x58)
+#define MTK_RTC_PDN2 (MTK_RTC_BASE + 0x5C)
+#define MTK_RTC_SPAR1 (MTK_RTC_BASE + 0x64)
+#define MTK_RTC_DIFF (MTK_RTC_BASE + 0x6C)
+#define MTK_RTC_CALI (MTK_RTC_BASE + 0x70)
+#define MTK_RTC_WRTGR (MTK_RTC_BASE + 0x74)
+
+#define POWERKEY1_MAGIC 0xA357
+#define POWERKEY2_MAGIC 0x67D2
+
+/* RTC_BBPU bit fields definitions */
+#define RTC_BBPU_PWREN (1 << 0)
+#define RTC_BBPU_WRITE_EN (1 << 1)
+#define RTC_BBPU_BBPU (1 << 2)
+#define RTC_BBPU_AUTO (1 << 3)
+#define RTC_BBPU_CLRPKY (1 << 4)
+#define RTC_BBPU_RELOAD (1 << 5)
+#define RTC_BBPU_CBUSY (1 << 6)
+#define RTC_BBPU_DBING (1 << 7)
+#define RTC_BBPU_KEY_BBPU (1 << 8)
+
+/* RTC_BBPU write is only acceptable when KEY_BBPU=0x43 */
+#define BBPU_MAGIC 0x4300
+
+/*
+ * PLL block section
+ */
+
+/* PLL registers definition */
+#define MTK_PLL_PLL (MTK_PLL_BASE + 0x00)
+#define MTK_PLL_PLL2 (MTK_PLL_BASE + 0x04)
+#define MTK_PLL_CLK_CON (MTK_PLL_BASE + 0x18)
+#define MTK_PLL_PDN_CON (MTK_PLL_BASE + 0x1C)
+
+/* MTK_PLL_PLL bit fields definitions */
+#define PLL_PLLVCOSEL (0 << 0)
+#define PLL_MPLLSEL_SYSCLK (1 << 3)
+#define PLL_MPLLSEL_PLL (2 << 3)
+#define PLL_DPLLSEL (1 << 5)
+#define PLL_UPLLSEL (1 << 6)
+#define PLL_RST (1 << 7)
+#define PLL_CALI (1 << 8)
+
+/* MTK_PLL_CLK_CON bit fields definitions */
+#define PLL_CLKSQ_DIV2_DSP (1 << 0)
+#define PLL_CLKSQ_DIV2_MCU (1 << 1)
+#define PLL_CLKSQ_PLD (1 << 2)
+#define PLL_SRCCLK (1 << 7)
+#define PLL_CLKSQ_TEST (1 << 15)
+
+/* MTK_PLL_PDN_CON bit fields definitions */
+#define PLL_PDN_CON_CLKSQ (1 << 11)
+#define PLL_PDN_CON_MCU_DIV2 (1 << 12)
+#define PLL_PDN_CON_PLL (1 << 13)
+#define PLL_PDN_CON_DSP_DIV2 (1 << 15)
+
+#endif