/* B-Netz main
 *
 * (C) 2016 by Andreas Eversberg <jolly@eversberg.eu>
 * All Rights Reserved
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */

#include <stdio.h>
#include <stdint.h>
#include <getopt.h>
#include <stdlib.h>
#include <string.h>
#include <signal.h>
#include <sched.h>
#include "../common/debug.h"
#include "../common/timer.h"
#include "../common/call.h"
#include "../common/mncc_sock.h"
#include "../common/main.h"
#include "../common/freiton.h"
#include "../common/besetztton.h"
#include "bnetz.h"
#include "dsp.h"
#include "image.h"
#include "ansage.h"

int gfs = 2;
const char *pilot = "tone";
double lossdetect = 0;

void print_help(const char *arg0)
{
	print_help_common(arg0, "");
	/*      -                                                                             - */
	printf(" -g --gfs <gruppenfreisignal>\n");
	printf("        Gruppenfreisignal\" 1..9 | 19 | 10..18 (default = '%d')\n", gfs);
	printf(" -P --pilot tone | positive | negative | <file>=<on>:<off>\n");
	printf("        Send a tone, give a signal or write to a file when switching to\n");
	printf("        channel 19. (paging the phone).\n");
	printf("        'tone', 'positive', 'negative' is sent on right audio channel.\n");
	printf("        'tone' sends a tone whenever channel 19 is switchted.\n");
	printf("        'positive' sends a positive signal for channel 19, else negative.\n");
	printf("        'negative' sends a negative signal for channel 19, else positive.\n");
	printf("        Example: /sys/class/gpio/gpio17/value=1:0 writes a '1' to\n");
	printf("        /sys/class/gpio/gpio17/value to switching to channel 19 and a '0' to\n");
	printf("        switch back. (default = %s)\n", pilot);
	printf(" -0 --loss <volume>\n");
	printf("        Detect loss of carrier by detecting steady noise above given volume in\n");
	printf("        percent. (disabled by default)\n");
	printf("\nstation-id: Give 5 digit station-id, you don't need to enter it for every\n");
	printf("        start of this program.\n");
}

static int handle_options(int argc, char **argv)
{
	int skip_args = 0;

	static struct option long_options_special[] = {
		{"gfs", 1, 0, 'g'},
		{"pilot", 1, 0, 'P'},
		{"loss", 1, 0, '0'},
		{0, 0, 0, 0},
	};

	set_options_common("g:P:0:", long_options_special);

	while (1) {
		int option_index = 0, c;

		c = getopt_long(argc, argv, optstring, long_options, &option_index);

		if (c == -1)
			break;

		switch (c) {
		case 'g':
			gfs = atoi(optarg);
			skip_args += 2;
			break;
		case 'P':
			pilot = strdup(optarg);
			skip_args += 2;
			break;
		case '0':
			lossdetect = atoi(optarg);
			skip_args += 2;
			break;
		default:
			opt_switch_common(c, argv[0], &skip_args);
		}
	}

	return skip_args;
}

int main(int argc, char *argv[])
{
	int rc;
	int skip_args;
	const char *station_id = "";

	/* init common tones */
	init_freiton();
	init_besetzton();
	init_ansage();

	skip_args = handle_options(argc, argv);
	argc -= skip_args;
	argv += skip_args;

	if (argc > 1) {
		station_id = argv[1];
		if (strlen(station_id) != 5) {
			printf("Given station ID '%s' does not have 5 digits\n", station_id);
			return 0;
		}
	}

	if (!kanal) {
		printf("No channel (\"Kanal\") is specified, I suggest channel 1.\n\n");
		print_help(argv[0]);
		return 0;
	}

	if (!loopback)
		print_image();

	/* init functions */
	if (use_mncc_sock) {
		rc = mncc_init("/tmp/bsc_mncc");
		if (rc < 0) {
			fprintf(stderr, "Failed to setup MNCC socket. Quitting!\n");
			return -1;
		}
	}
	dsp_init();
	bnetz_init();
	rc = call_init(station_id, call_sounddev, samplerate, latency, 5, loopback);
	if (rc < 0) {
		fprintf(stderr, "Failed to create call control instance. Quitting!\n");
		goto fail;
	}

	/* create transceiver instance */
	rc = bnetz_create(sounddev, samplerate, kanal, gfs, loopback, (double)lossdetect / 100.0, pilot);
	if (rc < 0) {
		fprintf(stderr, "Failed to create \"Sender\" instance. Quitting!\n");
		goto fail;
	}
	printf("Base station ready, please tune transmitter to %.3f MHz and receiver "
		"to %.3f MHz.\n", bnetz_kanal2freq(kanal, 0),
		bnetz_kanal2freq(kanal, 1));
	printf("To call phone, switch transmitter (using pilot signal) to %.3f MHz.\n", bnetz_kanal2freq(19, 0));

	signal(SIGINT,sighandler);
	signal(SIGHUP,sighandler);
	signal(SIGTERM,sighandler);
	signal(SIGPIPE,sighandler);

	if (rt_prio > 0) {
		struct sched_param schedp;
		int rc;

		memset(&schedp, 0, sizeof(schedp));
		schedp.sched_priority = rt_prio;
		rc = sched_setscheduler(0, SCHED_RR, &schedp);
		if (rc)
			fprintf(stderr, "Error setting SCHED_RR with prio %d\n", rt_prio);
	}

	main_loop(&quit, latency);

	if (rt_prio > 0) {
		struct sched_param schedp;

		memset(&schedp, 0, sizeof(schedp));
		schedp.sched_priority = 0;
		sched_setscheduler(0, SCHED_OTHER, &schedp);
	}

fail:
	/* cleanup functions */
	call_cleanup();
	if (use_mncc_sock)
		mncc_exit();

	/* destroy transceiver instance */
	while(sender_head)
		bnetz_destroy(sender_head);

	return 0;
}