diff options
Diffstat (limited to 'src/common/sdr.c')
-rw-r--r-- | src/common/sdr.c | 200 |
1 files changed, 111 insertions, 89 deletions
diff --git a/src/common/sdr.c b/src/common/sdr.c index e18ef92..d1b53fb 100644 --- a/src/common/sdr.c +++ b/src/common/sdr.c @@ -81,7 +81,7 @@ void *sdr_open(const char __attribute__((__unused__)) *audiodev, double *tx_freq { sdr_t *sdr; double bandwidth; - double tx_center_frequency, rx_center_frequency; + double tx_center_frequency = 0.0, rx_center_frequency = 0.0; int rc; int c; @@ -117,103 +117,125 @@ void *sdr_open(const char __attribute__((__unused__)) *audiodev, double *tx_freq PDEBUG(DSDR, DEBUG_ERROR, "NO MEM!\n"); goto error; } - for (c = 0; c < channels; c++) { - PDEBUG(DSDR, DEBUG_INFO, "Frequency #%d: TX = %.6f MHz, RX = %.6f MHz\n", c, tx_frequency[c] / 1e6, rx_frequency[c] / 1e6); - sdr->chan[c].tx_frequency = tx_frequency[c]; - sdr->chan[c].rx_frequency = rx_frequency[c]; - } - if (sdr->paging_channel) { - PDEBUG(DSDR, DEBUG_INFO, "Paging Frequency: TX = %.6f MHz\n", paging_frequency / 1e6); - sdr->chan[sdr->paging_channel].tx_frequency = paging_frequency; - } - /* calculate required bandwidth (IQ rate) */ - double tx_low_frequency = sdr->chan[0].tx_frequency, tx_high_frequency = sdr->chan[0].tx_frequency; - double rx_low_frequency = sdr->chan[0].rx_frequency, rx_high_frequency = sdr->chan[0].rx_frequency; - double range; - for (c = 1; c < channels; c++) { - if (sdr->chan[c].tx_frequency < tx_low_frequency) - tx_low_frequency = sdr->chan[c].tx_frequency; - if (sdr->chan[c].tx_frequency > tx_high_frequency) - tx_high_frequency = sdr->chan[c].tx_frequency; - if (sdr->chan[c].rx_frequency < rx_low_frequency) - rx_low_frequency = sdr->chan[c].rx_frequency; - if (sdr->chan[c].rx_frequency > rx_high_frequency) - rx_high_frequency = sdr->chan[c].rx_frequency; - } - if (sdr->paging_channel) { - if (sdr->chan[sdr->paging_channel].tx_frequency < tx_low_frequency) - tx_low_frequency = sdr->chan[sdr->paging_channel].tx_frequency; - if (sdr->chan[sdr->paging_channel].tx_frequency > tx_high_frequency) - tx_high_frequency = sdr->chan[sdr->paging_channel].tx_frequency; - } - /* range of TX */ - range = tx_high_frequency - tx_low_frequency; - if (range) - PDEBUG(DSDR, DEBUG_DEBUG, "Range between all TX Frequencies: %.6f MHz\n", range / 1e6); - if (range * 2 > sdr->samplerate) { - // why that? actually i don't know. i just want to be safe.... - PDEBUG(DSDR, DEBUG_NOTICE, "The sample rate must be at least twice the range between frequencies.\n"); - PDEBUG(DSDR, DEBUG_NOTICE, "The given rate is %.6f MHz, but required rate must be >= %.6f MHz\n", sdr->samplerate / 1e6, range * 2.0 / 1e6); - PDEBUG(DSDR, DEBUG_NOTICE, "Please increase samplerate!\n"); - goto error; - } - tx_center_frequency = (tx_high_frequency + tx_low_frequency) / 2.0; - /* range of RX */ - range = rx_high_frequency - rx_low_frequency; - if (range) - PDEBUG(DSDR, DEBUG_DEBUG, "Range between all RX Frequencies: %.6f MHz\n", range / 1e6); - if (range * 2.0 > sdr->samplerate) { - // why that? actually i don't know. i just want to be safe.... - PDEBUG(DSDR, DEBUG_NOTICE, "The sample rate must be at least twice the range between frequencies. Please increment samplerate!\n"); - goto error; - } - rx_center_frequency = (rx_high_frequency + rx_low_frequency) / 2.0; - PDEBUG(DSDR, DEBUG_INFO, "Using center frequency: TX %.6f MHz, RX %.6f\n", tx_center_frequency / 1e6, rx_center_frequency / 1e6); - /* set offsets to center frequency */ - for (c = 0; c < channels; c++) { - double tx_offset, rx_offset; - tx_offset = sdr->chan[c].tx_frequency - tx_center_frequency; - rx_offset = sdr->chan[c].rx_frequency - rx_center_frequency; - PDEBUG(DSDR, DEBUG_DEBUG, "Frequency #%d: TX offset: %.6f MHz, RX offset: %.6f MHz\n", c, tx_offset / 1e6, rx_offset / 1e6); - fm_mod_init(&sdr->chan[c].mod, sdr->samplerate, tx_offset, sdr->amplitude); - fm_demod_init(&sdr->chan[c].demod, sdr->samplerate, rx_offset, bandwidth); - } - if (sdr->paging_channel) { - double tx_offset; - tx_offset = sdr->chan[sdr->paging_channel].tx_frequency - tx_center_frequency; - PDEBUG(DSDR, DEBUG_DEBUG, "Paging Frequency: TX offset: %.6f MHz\n", tx_offset / 1e6); - fm_mod_init(&sdr->chan[sdr->paging_channel].mod, sdr->samplerate, tx_offset, sdr->amplitude); - } - PDEBUG(DSDR, DEBUG_INFO, "Using gain: TX %.1f dB, RX %.1f dB\n", sdr_tx_gain, sdr_rx_gain); + if (tx_frequency) { + /* calculate required bandwidth (IQ rate) */ + for (c = 0; c < channels; c++) { + PDEBUG(DSDR, DEBUG_INFO, "Frequency #%d: TX = %.6f MHz\n", c, tx_frequency[c] / 1e6); + sdr->chan[c].tx_frequency = tx_frequency[c]; + } + if (sdr->paging_channel) { + PDEBUG(DSDR, DEBUG_INFO, "Paging Frequency: TX = %.6f MHz\n", paging_frequency / 1e6); + sdr->chan[sdr->paging_channel].tx_frequency = paging_frequency; + } - if (sdr_write_iq_rx_wave) { - rc = wave_create_record(&sdr->wave_rx_rec, sdr_write_iq_rx_wave, sdr->samplerate, 2, 1.0); - if (rc < 0) { - PDEBUG(DSDR, DEBUG_ERROR, "Failed to create WAVE recoding instance!\n"); - goto error; + double tx_low_frequency = sdr->chan[0].tx_frequency, tx_high_frequency = sdr->chan[0].tx_frequency; + for (c = 1; c < channels; c++) { + if (sdr->chan[c].tx_frequency < tx_low_frequency) + tx_low_frequency = sdr->chan[c].tx_frequency; + if (sdr->chan[c].tx_frequency > tx_high_frequency) + tx_high_frequency = sdr->chan[c].tx_frequency; } - } - if (sdr_write_iq_tx_wave) { - rc = wave_create_record(&sdr->wave_tx_rec, sdr_write_iq_tx_wave, sdr->samplerate, 2, 1.0); - if (rc < 0) { - PDEBUG(DSDR, DEBUG_ERROR, "Failed to create WAVE recoding instance!\n"); - goto error; + if (sdr->paging_channel) { + if (sdr->chan[sdr->paging_channel].tx_frequency < tx_low_frequency) + tx_low_frequency = sdr->chan[sdr->paging_channel].tx_frequency; + if (sdr->chan[sdr->paging_channel].tx_frequency > tx_high_frequency) + tx_high_frequency = sdr->chan[sdr->paging_channel].tx_frequency; } - } - if (sdr_read_iq_rx_wave) { - rc = wave_create_playback(&sdr->wave_rx_play, sdr_read_iq_rx_wave, sdr->samplerate, 2, 1.0); - if (rc < 0) { - PDEBUG(DSDR, DEBUG_ERROR, "Failed to create WAVE playback instance!\n"); + /* range of TX */ + double range = tx_high_frequency - tx_low_frequency; + if (range) + PDEBUG(DSDR, DEBUG_DEBUG, "Range between all TX Frequencies: %.6f MHz\n", range / 1e6); + if (range * 2 > sdr->samplerate) { + // why that? actually i don't know. i just want to be safe.... + PDEBUG(DSDR, DEBUG_NOTICE, "The sample rate must be at least twice the range between frequencies.\n"); + PDEBUG(DSDR, DEBUG_NOTICE, "The given rate is %.6f MHz, but required rate must be >= %.6f MHz\n", sdr->samplerate / 1e6, range * 2.0 / 1e6); + PDEBUG(DSDR, DEBUG_NOTICE, "Please increase samplerate!\n"); goto error; } + tx_center_frequency = (tx_high_frequency + tx_low_frequency) / 2.0; + PDEBUG(DSDR, DEBUG_INFO, "Using center frequency: TX %.6f MHz\n", tx_center_frequency / 1e6); + /* set offsets to center frequency */ + for (c = 0; c < channels; c++) { + double tx_offset; + tx_offset = sdr->chan[c].tx_frequency - tx_center_frequency; + PDEBUG(DSDR, DEBUG_DEBUG, "Frequency #%d: TX offset: %.6f MHz\n", c, tx_offset / 1e6); + fm_mod_init(&sdr->chan[c].mod, sdr->samplerate, tx_offset, sdr->amplitude); + } + if (sdr->paging_channel) { + double tx_offset; + tx_offset = sdr->chan[sdr->paging_channel].tx_frequency - tx_center_frequency; + PDEBUG(DSDR, DEBUG_DEBUG, "Paging Frequency: TX offset: %.6f MHz\n", tx_offset / 1e6); + fm_mod_init(&sdr->chan[sdr->paging_channel].mod, sdr->samplerate, tx_offset, sdr->amplitude); + } + /* show gain */ + PDEBUG(DSDR, DEBUG_INFO, "Using gain: TX %.1f dB\n", sdr_tx_gain); + /* open wave */ + if (sdr_write_iq_tx_wave) { + rc = wave_create_record(&sdr->wave_tx_rec, sdr_write_iq_tx_wave, sdr->samplerate, 2, 1.0); + if (rc < 0) { + PDEBUG(DSDR, DEBUG_ERROR, "Failed to create WAVE recoding instance!\n"); + goto error; + } + } + if (sdr_read_iq_tx_wave) { + rc = wave_create_playback(&sdr->wave_tx_play, sdr_read_iq_tx_wave, sdr->samplerate, 2, 1.0); + if (rc < 0) { + PDEBUG(DSDR, DEBUG_ERROR, "Failed to create WAVE playback instance!\n"); + goto error; + } + } } - if (sdr_read_iq_tx_wave) { - rc = wave_create_playback(&sdr->wave_tx_play, sdr_read_iq_tx_wave, sdr->samplerate, 2, 1.0); - if (rc < 0) { - PDEBUG(DSDR, DEBUG_ERROR, "Failed to create WAVE playback instance!\n"); + + if (rx_frequency) { + for (c = 0; c < channels; c++) { + PDEBUG(DSDR, DEBUG_INFO, "Frequency #%d: RX = %.6f MHz\n", c, rx_frequency[c] / 1e6); + sdr->chan[c].rx_frequency = rx_frequency[c]; + } + + /* calculate required bandwidth (IQ rate) */ + double rx_low_frequency = sdr->chan[0].rx_frequency, rx_high_frequency = sdr->chan[0].rx_frequency; + for (c = 1; c < channels; c++) { + if (sdr->chan[c].rx_frequency < rx_low_frequency) + rx_low_frequency = sdr->chan[c].rx_frequency; + if (sdr->chan[c].rx_frequency > rx_high_frequency) + rx_high_frequency = sdr->chan[c].rx_frequency; + } + /* range of RX */ + double range = rx_high_frequency - rx_low_frequency; + if (range) + PDEBUG(DSDR, DEBUG_DEBUG, "Range between all RX Frequencies: %.6f MHz\n", range / 1e6); + if (range * 2.0 > sdr->samplerate) { + // why that? actually i don't know. i just want to be safe.... + PDEBUG(DSDR, DEBUG_NOTICE, "The sample rate must be at least twice the range between frequencies. Please increment samplerate!\n"); goto error; } + rx_center_frequency = (rx_high_frequency + rx_low_frequency) / 2.0; + PDEBUG(DSDR, DEBUG_INFO, "Using center frequency: RX %.6f MHz\n", rx_center_frequency / 1e6); + /* set offsets to center frequency */ + for (c = 0; c < channels; c++) { + double rx_offset; + rx_offset = sdr->chan[c].rx_frequency - rx_center_frequency; + PDEBUG(DSDR, DEBUG_DEBUG, "Frequency #%d: RX offset: %.6f MHz\n", c, rx_offset / 1e6); + fm_demod_init(&sdr->chan[c].demod, sdr->samplerate, rx_offset, bandwidth); + } + /* show gain */ + PDEBUG(DSDR, DEBUG_INFO, "Using gain: RX %.1f dB\n", sdr_rx_gain); + /* open wave */ + if (sdr_write_iq_rx_wave) { + rc = wave_create_record(&sdr->wave_rx_rec, sdr_write_iq_rx_wave, sdr->samplerate, 2, 1.0); + if (rc < 0) { + PDEBUG(DSDR, DEBUG_ERROR, "Failed to create WAVE recoding instance!\n"); + goto error; + } + } + if (sdr_read_iq_rx_wave) { + rc = wave_create_playback(&sdr->wave_rx_play, sdr_read_iq_rx_wave, sdr->samplerate, 2, 1.0); + if (rc < 0) { + PDEBUG(DSDR, DEBUG_ERROR, "Failed to create WAVE playback instance!\n"); + goto error; + } + } } #ifdef HAVE_UHD |