Move mobile phone specific code from libcommon.a to libmobile.a

1 files changed, 0 insertions, 755 deletions

diff --git a/src/common/main_common.c b/src/common/main_common.c
deleted file mode 100644
index cb57aa5..0000000
--- a/src/common/main_common.c
+++ /dev/null
@@ -1,755 +0,0 @@
-/* Common part for main.c of each base station type
- *
- * (C) 2016 by Andreas Eversberg <jolly@eversberg.eu>
- * All Rights Reserved
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <stdio.h>
-#include <stdint.h>
-#include <getopt.h>
-#include <stdlib.h>
-#include <string.h>
-#include <signal.h>
-#include <sched.h>
-#include <unistd.h>
-#include <math.h>
-#include <termios.h>
-#include <errno.h>
-#include "sample.h"
-#include "main.h"
-#include "debug.h"
-#include "sender.h"
-#include "timer.h"
-#include "call.h"
-#include "mncc_sock.h"
-#ifdef HAVE_SDR
-#include "sdr.h"
-#endif
-
-/* common settings */
-int num_kanal = 0;
-int kanal[MAX_SENDER];
-int num_audiodev = 0;
-const char *audiodev[MAX_SENDER] = { "hw:0,0" };
-const char *call_audiodev = "";
-int samplerate = 48000;
-int call_samplerate = 48000;
-int interval = 1;
-int latency = 50;
-int uses_emphasis = 1;
-int do_pre_emphasis = 0;
-int do_de_emphasis = 0;
-double rx_gain = 1.0;
-int use_mncc_sock = 0;
-const char *mncc_name = "";
-int send_patterns = 1;
-int release_on_disconnect = 1;
-int loopback = 0;
-int rt_prio = 0;
-const char *write_tx_wave = NULL;
-const char *write_rx_wave = NULL;
-const char *read_tx_wave = NULL;
-const char *read_rx_wave = NULL;
-int use_sdr = 0;
-int sdr_channel = 0;
-static const char *sdr_device_args = "",  *sdr_stream_args = "",  *sdr_tune_args = "";
-static int sdr_samplerate = 0;
-static double sdr_bandwidth = 0.0;
-#ifdef HAVE_SDR
-static int sdr_uhd = 0;
-static int sdr_soapy = 0;
-#endif
-double sdr_tx_gain = 0, sdr_rx_gain = 0;
-const char *sdr_tx_antenna = "", *sdr_rx_antenna = "";
-const char *write_iq_tx_wave = NULL;
-const char *write_iq_rx_wave = NULL;
-const char *read_iq_tx_wave = NULL;
-const char *read_iq_rx_wave = NULL;
-int sdr_swap_links = 0;
-int sdr_uhd_tx_timestamps = 0;
-
-void print_help_common(const char *arg0, const char *ext_usage)
-{
-	printf("Usage: %s -k <kanal/channel> %s[options] [station-id]\n", arg0, ext_usage);
-	printf("\nGlobal options:\n");
-	/*      -                                                                             - */
-	printf(" -h --help\n");
-	printf("        This help\n");
-	printf(" -v --verbose <level> | <level>,<category>[,<category>[,...]] | list\n");
-	printf("        Use 'list' to get a list of all levels and categories\n");
-	printf("        Verbose level: digit of debug level (default = '%d')\n", debuglevel);
-	printf("        Verbose level+category: level digit followed by one or more categories\n");
-	printf("        -> If no category is specified, all categories are selected\n");
-	printf(" -k --kanal <channel>\n");
-	printf(" -k --channel <channel>\n");
-	printf("        Channel (German = Kanal) number of \"Sender\" (German = Transceiver)\n");
-	printf(" -a --audio-device hw:<card>,<device>\n");
-	printf("        Sound card and device number (default = '%s')\n", audiodev[0]);
-	printf("        Don't set it for SDR!\n");
-	printf(" -s --samplerate <rate>\n");
-	printf("        Sample rate of sound device (default = '%d')\n", samplerate);
-	printf(" -i --interval 1..25\n");
-	printf("        Interval of processing loop in ms (default = '%d' ms)\n", interval);
-	printf("        Use 25 to drastically reduce CPU usage. In case of buffer underrun,\n");
-	printf("        increase latency accordingly.\n");
-	printf(" -b --buffer <ms>\n");
-	printf("        How many milliseconds are processed in advance (default = '%d')\n", latency);
-    if (uses_emphasis) {
-	printf(" -p --pre-emphasis\n");
-	printf("        Enable pre-emphasis, if you directly connect to the oscillator of the\n");
-	printf("        transmitter. (No pre-emphasis done by the transmitter.)\n");
-	printf(" -d --de-emphasis\n");
-	printf("        Enable de-emphasis, if you directly connect to the discriminator of\n");
-	printf("        the receiver. (No de-emphasis done by the receiver.)\n");
-    }
-	printf(" -g --rx-gain <dB>\n");
-	printf("        Raise receiver RX level by given gain in dB. This is useful if input\n");
-	printf("        level of the sound device is too low, even after setting maximum level\n");
-	printf("        with the mixer settings. (Works with sound card only.)\n");
-	printf(" -m --mncc-sock\n");
-	printf("        Disable built-in call contol and offer socket (to LCR)\n");
-	printf(" --mncc-name <name>\n");
-	printf("        '/tmp/bsc_mncc' is used by default, give name to change socket to\n");
-	printf("        '/tmp/bsc_mncc_<name>'. (Useful to run multiple networks.)\n");
-	printf(" -c --call-device hw:<card>,<device>\n");
-	printf("        Sound card and device number for headset (default = '%s')\n", call_audiodev);
-	printf("    --call-samplerate <rate>\n");
-	printf("        Sample rate of sound device for headset (default = '%d')\n", call_samplerate);
-	printf(" -t --tones 0 | 1\n");
-	printf("        Connect call on setup/release to provide classic tones towards fixed\n");
-	printf("        network (default = '%d')\n", send_patterns);
-	printf(" -l --loopback <type>\n");
-	printf("        Loopback test: 1 = internal | 2 = external | 3 = echo\n");
-	printf(" -r --realtime <prio>\n");
-	printf("        Set prio: 0 to diable, 99 for maximum (default = %d)\n", rt_prio);
-	printf("    --write-rx-wave <file>\n");
-	printf("        Write received audio to given wave file.\n");
-	printf("    --write-tx-wave <file>\n");
-	printf("        Write transmitted audio to given wave file.\n");
-	printf("    --read-rx-wave <file>\n");
-	printf("        Replace received audio by given wave file.\n");
-	printf("    --read-tx-wave <file>\n");
-	printf("        Replace transmitted audio by given wave file.\n");
-#ifdef HAVE_SDR
-	printf("\nSDR options:\n");
-	/*      -                                                                             - */
-#ifdef HAVE_UHD
-	printf("    --sdr-uhd\n");
-	printf("        Force UHD driver\n");
-#endif
-#ifdef HAVE_SOAPY
-	printf("    --sdr-soapy\n");
-	printf("        Force SoapySDR driver\n");
-#endif
-	printf("    --sdr-channel <channel #>\n");
-	printf("        Give channel number for multi channel SDR device (default = %d)\n", sdr_channel);
-	printf("    --sdr-device-args <args>\n");
-	printf("    --sdr-stream-args <args>\n");
-	printf("    --sdr-tune-args <args>\n");
-	printf("        Optional SDR device arguments, seperated by comma\n");
-	printf("        e.g. --sdr-device-args <key>=<value>[,<key>=<value>[,...]]\n");
-	printf("    --sdr-samplerate <samplerate>\n");
-	printf("        Sample rate to use with SDR. By default it equals the regular sample\n");
-	printf("        rate.\n");
-	printf("    --sdr-bandwidth <bandwidth>\n");
-	printf("        Give IF filter bandwidth to use. If not, sample rate is used.\n");
-	printf("    --sdr-rx-antenna <name>\n");
-	printf("        SDR device's RX antenna name, use 'list' to get a list\n");
-	printf("    --sdr-tx-antenna <name>\n");
-	printf("        SDR device's TX antenna name, use 'list' to get a list\n");
-	printf("    --sdr-rx-gain <gain>\n");
-	printf("        SDR device's RX gain in dB (default = %.1f)\n", sdr_rx_gain);
-	printf("    --sdr-tx-gain <gain>\n");
-	printf("        SDR device's TX gain in dB (default = %.1f)\n", sdr_tx_gain);
-	printf("    --write-iq-rx-wave <file>\n");
-	printf("        Write received IQ data to given wave file.\n");
-	printf("    --write-iq-tx-wave <file>\n");
-	printf("        Write transmitted IQ data to given wave file.\n");
-	printf("    --read-iq-rx-wave <file>\n");
-	printf("        Replace received IQ data by given wave file.\n");
-	printf("    --read-iq-tx-wave <file>\n");
-	printf("        Replace transmitted IQ data by given wave file.\n");
-	printf("    --sdr-swap-links\n");
-	printf("        Swap RX and TX frequencies for loopback tests over the air.r\n");
-#ifdef HAVE_UHD
-	printf("    --sdr-uhd-tx-timestamps\n");
-	printf("        Use TX timestamps on UHD device. (May not work with some devices!)\n");
-#endif
-#endif
-	printf("\nNetwork specific options:\n");
-}
-
-void print_hotkeys_common(void)
-{
-	printf("\n");
-	printf("Press digits '0'..'9' and then 'd' key to dial towards mobile station\n");
-	printf("Press 'h' key to hangup.\n");
-	printf("Press 'w' key to toggle display of RX wave form.\n");
-	printf("Press 'c' key to toggle display of channel status.\n");
-#ifdef HAVE_SDR
-	printf("Press 'i' key to toggle display of RX I/Q vector.\n");
-	printf("Press 's' key to toggle display of RX spectrum.\n");
-#endif
-}
-
-#define	OPT_CHANNEL		1000
-#define	OPT_WRITE_RX_WAVE	1001
-#define	OPT_WRITE_TX_WAVE	1002
-#define	OPT_READ_RX_WAVE	1003
-#define	OPT_READ_TX_WAVE	1004
-#define	OPT_CALL_SAMPLERATE	1005
-#define	OPT_MNCC_NAME		1006
-
-#define	OPT_SDR_UHD		1100
-#define	OPT_SDR_SOAPY		1101
-#define	OPT_SDR_CHANNEL		1102
-#define	OPT_SDR_DEVICE_ARGS	1103
-#define	OPT_SDR_STREAM_ARGS	1104
-#define	OPT_SDR_TUNE_ARGS	1105
-#define	OPT_SDR_RX_ANTENNA	1106
-#define	OPT_SDR_TX_ANTENNA	1107
-#define	OPT_SDR_RX_GAIN		1108
-#define	OPT_SDR_TX_GAIN		1109
-#define	OPT_SDR_SAMPLERATE	1110
-#define	OPT_SDR_BANDWIDTH	1111
-#define	OPT_WRITE_IQ_RX_WAVE	1112
-#define	OPT_WRITE_IQ_TX_WAVE	1113
-#define	OPT_READ_IQ_RX_WAVE	1114
-#define	OPT_READ_IQ_TX_WAVE	1115
-#define	OPT_SDR_SWAP_LINKS	1116
-#define OPT_SDR_UHD_TX_TS	1117
-
-static struct option long_options_common[] = {
-	{"help", 0, 0, 'h'},
-	{"debug", 1, 0, 'v'},
-	{"kanal", 1, 0, 'k'},
-	{"channel", 1, 0, OPT_CHANNEL},
-	{"audio-device", 1, 0, 'a'},
-	{"samplerate", 1, 0, 's'},
-	{"interval", 1, 0, 'i'},
-	{"buffer", 1, 0, 'b'},
-	{"pre-emphasis", 0, 0, 'p'},
-	{"de-emphasis", 0, 0, 'd'},
-	{"rx-gain", 1, 0, 'g'},
-	{"mncc-sock", 0, 0, 'm'},
-	{"mncc-name", 1, 0, OPT_MNCC_NAME},
-	{"call-device", 1, 0, 'c'},
-	{"call-samplerate", 1, 0, OPT_CALL_SAMPLERATE},
-	{"tones", 0, 0, 't'},
-	{"loopback", 1, 0, 'l'},
-	{"realtime", 1, 0, 'r'},
-	{"write-rx-wave", 1, 0, OPT_WRITE_RX_WAVE},
-	{"write-tx-wave", 1, 0, OPT_WRITE_TX_WAVE},
-	{"read-rx-wave", 1, 0, OPT_READ_RX_WAVE},
-	{"read-tx-wave", 1, 0, OPT_READ_TX_WAVE},
-	{"sdr-uhd", 0, 0, OPT_SDR_UHD},
-	{"sdr-soapy", 0, 0, OPT_SDR_SOAPY},
-	{"sdr-channel", 1, 0, OPT_SDR_CHANNEL},
-	{"sdr-device-args", 1, 0, OPT_SDR_DEVICE_ARGS},
-	{"sdr-stream-args", 1, 0, OPT_SDR_STREAM_ARGS},
-	{"sdr-tune-args", 1, 0, OPT_SDR_TUNE_ARGS},
-	{"sdr-samplerate", 1, 0, OPT_SDR_SAMPLERATE},
-	{"sdr-bandwidth", 1, 0, OPT_SDR_BANDWIDTH},
-	{"sdr-rx-antenna", 1, 0, OPT_SDR_RX_ANTENNA},
-	{"sdr-tx-antenna", 1, 0, OPT_SDR_TX_ANTENNA},
-	{"sdr-rx-gain", 1, 0, OPT_SDR_RX_GAIN},
-	{"sdr-tx-gain", 1, 0, OPT_SDR_TX_GAIN},
-	{"write-iq-rx-wave", 1, 0, OPT_WRITE_IQ_RX_WAVE},
-	{"write-iq-tx-wave", 1, 0, OPT_WRITE_IQ_TX_WAVE},
-	{"read-iq-rx-wave", 1, 0, OPT_READ_IQ_RX_WAVE},
-	{"read-iq-tx-wave", 1, 0, OPT_READ_IQ_TX_WAVE},
-	{"sdr-swap-links", 0, 0, OPT_SDR_SWAP_LINKS},
-	{"sdr-uhd-tx-timestamps", 0, 0, OPT_SDR_UHD_TX_TS},
-	{0, 0, 0, 0}
-};
-
-const char *optstring_common = "hv:k:a:s:i:b:pdg:mc:t:l:r:";
-
-struct option *long_options;
-char *optstring;
-
-static void check_duplicate_option(int num, struct option *option)
-{
-	int i;
-
-	for (i = 0; i < num; i++) {
-		if (long_options[i].val == option->val) {
-			fprintf(stderr, "Duplicate option %d. Please fix!\n", option->val);
-			abort();
-		}
-	}
-}
-
-void set_options_common(const char *optstring_special, struct option *long_options_special)
-{
-	int i;
-
-	long_options = calloc(sizeof(*long_options), 100);
-	for (i = 0; long_options_common[i].name; i++) {
-		check_duplicate_option(i, &long_options_common[i]);
-		memcpy(&long_options[i], &long_options_common[i], sizeof(*long_options));
-	}
-	for (; long_options_special->name; i++) {
-		check_duplicate_option(i, long_options_special);
-		memcpy(&long_options[i], long_options_special++, sizeof(*long_options));
-	}
-	
-	optstring = calloc(strlen(optstring_common) + strlen(optstring_special) + 1, 1);
-	strcpy(optstring, optstring_common);
-	strcat(optstring, optstring_special);
-}
-
-void opt_switch_common(int c, char *arg0, int *skip_args)
-{
-	double gain_db;
-
-	switch (c) {
-	case 'h':
-		print_help(arg0);
-		exit(0);
-	case 'v':
-		if (!strcasecmp(optarg, "list")) {
-	                debug_list_cat();
-			exit(0);
-		}
-		if (parse_debug_opt(optarg)) {
-			fprintf(stderr, "Failed to parse debug option, please use -h for help.\n");
-			exit(0);
-		}
-		*skip_args += 2;
-		break;
-	case 'k':
-	case OPT_CHANNEL:
-		OPT_ARRAY(num_kanal, kanal, atoi(optarg))
-		*skip_args += 2;
-		break;
-	case 'a':
-		OPT_ARRAY(num_audiodev, audiodev, strdup(optarg))
-		*skip_args += 2;
-		break;
-	case 's':
-		samplerate = atoi(optarg);
-		*skip_args += 2;
-		break;
-	case 'i':
-		interval = atoi(optarg);
-		*skip_args += 2;
-		if (interval < 1)
-			interval = 1;
-		if (interval > 25)
-			interval = 25;
-		break;
-	case 'b':
-		latency = atoi(optarg);
-		*skip_args += 2;
-		break;
-	case 'p':
-		if (!uses_emphasis) {
-			no_emph:
-			fprintf(stderr, "This network does not use emphasis, please do not enable pre- or de-emphasis! Disable emphasis on transceiver, if possible.\n");
-			exit(0);
-		}
-		do_pre_emphasis = 1;
-		*skip_args += 1;
-		break;
-	case 'd':
-		if (!uses_emphasis)
-			goto no_emph;
-		do_de_emphasis = 1;
-		*skip_args += 1;
-		break;
-	case 'g':
-		gain_db = atof(optarg);
-		if (gain_db < 0.0) {
-			fprintf(stderr, "Given gain is below 0. To reduce RX signal, use sound card's mixer (or resistor net)!\n");
-			exit(0);
-		}
-		rx_gain = pow(10, gain_db / 20.0);
-		*skip_args += 2;
-		break;
-	case 'm':
-		use_mncc_sock = 1;
-		*skip_args += 1;
-		break;
-	case OPT_MNCC_NAME:
-		mncc_name = strdup(optarg);
-		*skip_args += 2;
-		break;
-	case 'c':
-		call_audiodev = strdup(optarg);
-		*skip_args += 2;
-		break;
-	case OPT_CALL_SAMPLERATE:
-		call_samplerate = atoi(optarg);
-		*skip_args += 2;
-		break;
-	case 't':
-		send_patterns = atoi(optarg);
-		*skip_args += 2;
-		break;
-	case 'l':
-		loopback = atoi(optarg);
-		*skip_args += 2;
-		break;
-	case 'r':
-		rt_prio = atoi(optarg);
-		*skip_args += 2;
-		break;
-	case OPT_WRITE_RX_WAVE:
-		write_rx_wave = strdup(optarg);
-		*skip_args += 2;
-		break;
-	case OPT_WRITE_TX_WAVE:
-		write_tx_wave = strdup(optarg);
-		*skip_args += 2;
-		break;
-	case OPT_READ_RX_WAVE:
-		read_rx_wave = strdup(optarg);
-		*skip_args += 2;
-		break;
-	case OPT_READ_TX_WAVE:
-		read_tx_wave = strdup(optarg);
-		*skip_args += 2;
-		break;
-	case OPT_SDR_UHD:
-#ifdef HAVE_SDR
-		use_sdr = 1;
-		sdr_uhd = 1;
-#else
-		fprintf(stderr, "UHD SDR support not compiled in!\n");
-		exit(0);
-#endif
-		*skip_args += 1;
-		break;
-	case OPT_SDR_SOAPY:
-#ifdef HAVE_SDR
-		use_sdr = 1;
-		sdr_soapy = 1;
-#else
-		fprintf(stderr, "SoapySDR support not compiled in!\n");
-		exit(0);
-#endif
-		*skip_args += 1;
-		break;
-	case OPT_SDR_CHANNEL:
-		sdr_channel = atoi(optarg);
-		*skip_args += 2;
-		break;
-	case OPT_SDR_DEVICE_ARGS:
-		sdr_device_args = strdup(optarg);
-		*skip_args += 2;
-		break;
-	case OPT_SDR_STREAM_ARGS:
-		sdr_stream_args = strdup(optarg);
-		*skip_args += 2;
-		break;
-	case OPT_SDR_TUNE_ARGS:
-		sdr_tune_args = strdup(optarg);
-		*skip_args += 2;
-		break;
-	case OPT_SDR_SAMPLERATE:
-		sdr_samplerate = atoi(optarg);
-		*skip_args += 2;
-		break;
-	case OPT_SDR_BANDWIDTH:
-		sdr_bandwidth = atof(optarg);
-		*skip_args += 2;
-		break;
-	case OPT_SDR_RX_ANTENNA:
-		sdr_rx_antenna = strdup(optarg);
-		*skip_args += 2;
-		break;
-	case OPT_SDR_TX_ANTENNA:
-		sdr_tx_antenna = strdup(optarg);
-		*skip_args += 2;
-		break;
-	case OPT_SDR_RX_GAIN:
-		sdr_rx_gain = atof(optarg);
-		*skip_args += 2;
-		break;
-	case OPT_SDR_TX_GAIN:
-		sdr_tx_gain = atof(optarg);
-		*skip_args += 2;
-		break;
-	case OPT_WRITE_IQ_RX_WAVE:
-		write_iq_rx_wave = strdup(optarg);
-		*skip_args += 2;
-		break;
-	case OPT_WRITE_IQ_TX_WAVE:
-		write_iq_tx_wave = strdup(optarg);
-		*skip_args += 2;
-		break;
-	case OPT_READ_IQ_RX_WAVE:
-		read_iq_rx_wave = strdup(optarg);
-		*skip_args += 2;
-		break;
-	case OPT_READ_IQ_TX_WAVE:
-		read_iq_tx_wave = strdup(optarg);
-		*skip_args += 2;
-		break;
-	case OPT_SDR_SWAP_LINKS:
-		sdr_swap_links = 1;
-		*skip_args += 1;
-		break;
-	case OPT_SDR_UHD_TX_TS:
-		sdr_uhd_tx_timestamps = 1;
-		*skip_args += 1;
-		break;
-	default:
-		exit (0);
-	}
-}
-
-/* global variable to quit main loop */
-int quit = 0;
-
-void sighandler(int sigset)
-{
-	if (sigset == SIGHUP)
-		return;
-	if (sigset == SIGPIPE)
-		return;
-
-	clear_console_text();
-	printf("Signal received: %d\n", sigset);
-
-	quit = 1;
-}
-
-static int get_char()
-{
-	struct timeval tv = {0, 0};
-	fd_set fds;
-	char c = 0;
-	int __attribute__((__unused__)) rc;
-
-	FD_ZERO(&fds);
-	FD_SET(0, &fds);
-	select(0+1, &fds, NULL, NULL, &tv);
-	if (FD_ISSET(0, &fds)) {
-		rc = read(0, &c, 1);
-		return c;
-	} else
-		return -1;
-}
-
-/* Loop through all transceiver instances of one network. */
-void main_common(int *quit, int latency, int interval, void (*myhandler)(void), const char *station_id, int station_id_digits)
-{
-	int latspl;
-	sender_t *sender;
-	double last_time_call = 0, begin_time, now, sleep;
-	struct termios term, term_orig;
-	int c;
-	int rc;
-
-	/* latency of send buffer in samples */
-	latspl = samplerate * latency / 1000;
-
-	/* init mncc */
-	if (use_mncc_sock) {
-		char mncc_sock_name[64];
-		if (mncc_name[0]) {
-			snprintf(mncc_sock_name, sizeof(mncc_sock_name), "/tmp/bsc_mncc_%s", mncc_name);
-			mncc_sock_name[sizeof(mncc_sock_name) - 1] = '\0';
-		} else
-			strcpy(mncc_sock_name, "/tmp/bsc_mncc");
-		rc = mncc_init(mncc_sock_name);
-		if (rc < 0) {
-			fprintf(stderr, "Failed to setup MNCC socket. Quitting!\n");
-			return;
-		}
-	}
-
-	/* init call device */
-	rc = call_init(station_id, call_audiodev, call_samplerate, latency, station_id_digits, loopback, use_mncc_sock, send_patterns, release_on_disconnect);
-	if (rc < 0) {
-		fprintf(stderr, "Failed to create call control instance. Quitting!\n");
-		return;
-	}
-
-#ifdef HAVE_SDR
-	if ((sdr_uhd == 1 && sdr_soapy == 1)) {
-		fprintf(stderr, "You must choose which one you want: --sdr-uhd or --sdr-soapy\n");
-		return;
-	}
-
-	if (sdr_samplerate == 0.0)
-		sdr_samplerate = samplerate;
-	if (sdr_bandwidth == 0.0)
-		sdr_bandwidth = sdr_samplerate;
-	rc = sdr_init(sdr_uhd, sdr_soapy, sdr_channel, sdr_device_args, sdr_stream_args, sdr_tune_args, sdr_tx_antenna, sdr_rx_antenna, sdr_tx_gain, sdr_rx_gain, sdr_samplerate, sdr_bandwidth, write_iq_tx_wave, write_iq_rx_wave, read_iq_tx_wave, read_iq_rx_wave, latspl, sdr_swap_links, sdr_uhd_tx_timestamps);
-	if (rc < 0)
-		return;
-#endif
-
-	/* open audio */
-	if (sender_open_audio())
-		return;
-	if (call_open_audio())
-		return;
-
-	/* real time priority */
-	if (rt_prio > 0) {
-		struct sched_param schedp;
-		int rc;
-
-		memset(&schedp, 0, sizeof(schedp));
-		schedp.sched_priority = rt_prio;
-		rc = sched_setscheduler(0, SCHED_RR, &schedp);
-		if (rc)
-			fprintf(stderr, "Error setting SCHED_RR with prio %d\n", rt_prio);
-	}
-
-	/* prepare terminal */
-	tcgetattr(0, &term_orig);
-	term = term_orig;
-	term.c_lflag &= ~(ISIG|ICANON|ECHO);
-	term.c_cc[VMIN]=1;
-	term.c_cc[VTIME]=2;
-	tcsetattr(0, TCSANOW, &term);
-
-	/* catch signals */
-	signal(SIGINT, sighandler);
-	signal(SIGHUP, sighandler);
-	signal(SIGTERM, sighandler);
-	signal(SIGPIPE, sighandler);
-
-	/* start streaming */
-	if (sender_start_audio())
-		*quit = 1;
-	if (call_start_audio())
-		*quit = 1;
-
-	while(!(*quit)) {
-		begin_time = get_time();
-
-		/* process sound of all transceivers */
-		for (sender = sender_head; sender; sender = sender->next) {
-			/* do not process audio for an audio slave, since it is done by audio master */
-			if (sender->master) /* if master is set, we are an audio slave */
-				continue;
-			process_sender_audio(sender, quit, latspl);
-		}
-
-		/* process timers */
-		process_timer();
-
-		/* process audio for mncc call instances */
-		now = get_time();
-		if (now - last_time_call >= 0.1)
-			last_time_call = now;
-		if (now - last_time_call >= 0.020) {
-			last_time_call += 0.020;
-			/* call clock every 20ms */
-			call_mncc_clock();
-		}
-
-next_char:
-		c = get_char();
-		switch (c) {
-		case 3:
-			/* quit */
-			clear_console_text();
-			printf("CTRL+c received, quitting!\n");
-			*quit = 1;
-			goto next_char;
-		case 'w':
-			/* toggle display */
-#ifdef HAVE_SDR
-			display_iq_on(0);
-			display_spectrum_on(0);
-#endif
-			display_status_on(0);
-			display_wave_on(-1);
-			goto next_char;
-		case 'c':
-			/* toggle display */
-#ifdef HAVE_SDR
-			display_iq_on(0);
-			display_spectrum_on(0);
-#endif
-			display_wave_on(0);
-			display_status_on(-1);
-			goto next_char;
-#ifdef HAVE_SDR
-		case 'q':
-			/* toggle display */
-			display_wave_on(0);
-			display_status_on(0);
-			display_spectrum_on(0);
-			display_iq_on(-1);
-			goto next_char;
-		case 's':
-			/* toggle spectrum */
-			display_wave_on(0);
-			display_status_on(0);
-			display_iq_on(0);
-			display_spectrum_on(-1);
-			goto next_char;
-#endif
-		case 'i':
-			/* dump info */
-			dump_info();
-			goto next_char;
-		}
-
-		/* process audio of built-in call control */
-		process_call(c);
-
-		if (myhandler)
-			myhandler();
-
-		now = get_time();
-
-		/* sleep interval */
-		sleep = ((double)interval / 1000.0) - (now - begin_time);
-		if (sleep > 0)
-			usleep(sleep * 1000000.0);
-
-//		now = get_time();
-//		printf("duration =%.6f\n", now - begin_time);
-	}
-
-	/* reset signals */
-	signal(SIGINT, SIG_DFL);
-	signal(SIGHUP, SIG_DFL);
-	signal(SIGTERM, SIG_DFL);
-	signal(SIGPIPE, SIG_DFL);
-
-	/* get rid of last entry */
-	clear_console_text();
-
-	/* reset terminal */
-	tcsetattr(0, TCSANOW, &term_orig);
-	
-	/* reset real time prio */
-	if (rt_prio > 0) {
-		struct sched_param schedp;
-
-		memset(&schedp, 0, sizeof(schedp));
-		schedp.sched_priority = 0;
-		sched_setscheduler(0, SCHED_OTHER, &schedp);
-	}
-
-	/* cleanup call control */
-	call_cleanup();
-
-	/* close mncc socket */
-	if (use_mncc_sock)
-		mncc_exit();
-}
-