diff options
| -rw-r--r-- | doc/manuals/Makefile | 10 | ||||
| -rw-r--r-- | doc/manuals/chapters/configuration.adoc | 36 | ||||
| -rw-r--r-- | doc/manuals/chapters/control.adoc | 12 | ||||
| -rw-r--r-- | doc/manuals/chapters/counters.adoc | 4 | ||||
| -rw-r--r-- | doc/manuals/chapters/counters_generated.adoc | 7 | ||||
| -rw-r--r-- | doc/manuals/chapters/overview.adoc | 59 | ||||
| -rw-r--r-- | doc/manuals/chapters/running.adoc | 19 | ||||
| -rw-r--r-- | doc/manuals/osmotrx-usermanual-docinfo.xml | 46 | ||||
| -rw-r--r-- | doc/manuals/osmotrx-usermanual.adoc | 32 | ||||
| -rw-r--r-- | doc/manuals/osmotrx-vty-reference.xml | 37 | ||||
| -rw-r--r-- | doc/manuals/vty/trx_vty_additions.xml | 2 | ||||
| -rw-r--r-- | doc/manuals/vty/trx_vty_reference.xml | 1183 |
12 files changed, 1447 insertions, 0 deletions
diff --git a/doc/manuals/Makefile b/doc/manuals/Makefile new file mode 100644 index 0000000..81aec9a --- /dev/null +++ b/doc/manuals/Makefile @@ -0,0 +1,10 @@ +TOPDIR = .. + +ASCIIDOC = osmotrx-usermanual.adoc +ASCIIDOC_DEPS = chapters/*.adoc +include $(TOPDIR)/build/Makefile.asciidoc.inc + +VTY_REFERENCE = osmotrx-vty-reference.xml +include $(TOPDIR)/build/Makefile.vty-reference.inc + +include $(TOPDIR)/build/Makefile.common.inc diff --git a/doc/manuals/chapters/configuration.adoc b/doc/manuals/chapters/configuration.adoc new file mode 100644 index 0000000..cdde366 --- /dev/null +++ b/doc/manuals/chapters/configuration.adoc @@ -0,0 +1,36 @@ +== Configuring OsmTRX + +OsmoTRX will read the configuration at startup time and configure the +transceiver accordingly after validating the configuration. + +OsmoTRX can handle several TRX channels, but at least one must be configured in +order to be able to start it successfully. Channels must be present in the +configuration file in incremental order, starting from 0 and be consecutive. + +Example configuration files for different devices and setups can be found in +`doc/examples/` in 'osmo-trx' git repository. + +=== Documented example + +.Example: Static GGSN/APN configuration (single catch-all GGSN) +---- +trx + bind-ip 127.0.0.1 <1> + remote-ip 127.0.0.1 <2> + base-port 5700 <3> + egprs disable <4> + tx-sps 4 <5> + rx-sps 4 <6> + chan 0 <7> + tx-path BAND1 <8> + rx-path LNAW <9> +---- +<1> Configure the local IP address at the TRX used for the connection against `osmo-bts-trx`. +<2> Specify the IP address of `osmo-bts-trx` to connect to. +<3> Specify the reference base UDP port to use for communication. +<4> Don't enable EDGE support. +<5> Use 4 TX samples per symbol. This is device specific. +<6> Use 4 RX samples per symbol. This is device specific. +<7> Configure the first channel. As no other channels are specified, `osmo-trx` assumes it is using only one channel. +<8> Configure the device to use `BAND1` Tx antenna path from all the available ones (device specific). +<9> Configure the device to use `LNAW` Rx antenna path from all the available ones (device specific). diff --git a/doc/manuals/chapters/control.adoc b/doc/manuals/chapters/control.adoc new file mode 100644 index 0000000..168769a --- /dev/null +++ b/doc/manuals/chapters/control.adoc @@ -0,0 +1,12 @@ +[[control]] +== Control interface + +The actual protocol is described in <<common-control-if>>, the variables +common to all programs using it are described in <<ctrl_common_vars>>. Here we +describe variables specific to OsmoTRX. + +.Variables available over control interface +[options="header",width="100%",cols="20%,5%,5%,50%,20%"] +|=== +|Name|Access|Trap|Value|Comment +|=== diff --git a/doc/manuals/chapters/counters.adoc b/doc/manuals/chapters/counters.adoc new file mode 100644 index 0000000..7fbb10c --- /dev/null +++ b/doc/manuals/chapters/counters.adoc @@ -0,0 +1,4 @@ +[[counters]] +== Counters + +include::./counters_generated.adoc[] diff --git a/doc/manuals/chapters/counters_generated.adoc b/doc/manuals/chapters/counters_generated.adoc new file mode 100644 index 0000000..b40dc37 --- /dev/null +++ b/doc/manuals/chapters/counters_generated.adoc @@ -0,0 +1,7 @@ +// autogenerated by show asciidoc counters +These counters and their description based on OsmoTRX 0.2.0.61-408f (OsmoTRX). + +// generating tables for rate_ctr_group +// generating tables for osmo_stat_items +// generating tables for osmo_counters +// there are no ungrouped osmo_counters diff --git a/doc/manuals/chapters/overview.adoc b/doc/manuals/chapters/overview.adoc new file mode 100644 index 0000000..b7d9697 --- /dev/null +++ b/doc/manuals/chapters/overview.adoc @@ -0,0 +1,59 @@ +[[chapter_introduction]] +== Overview + +[[intro_overview]] +=== About OsmoTRX + +OsmoTRX is a C/C++ language implementation of the GSM radio modem, +originally developed as the 'Transceiver' part of OpenBTS. This radio +modem offers an interface based on top of UDP streams. + + +The OsmoBTS bts_model code for OsmoTRX is called +`osmo-bts-trx`. It implements the UDP stream interface of +OsmoTRX, so both parts can be used together to implement a complete GSM +BTS based on general-purpose computing SDR. + +As OsmoTRX is general-purpose software running on top of Linux, it is +thus not tied to any specific physical hardware. At the time of this +writing, OsmoTRX supports a variety of Lime Microsystems and Ettus USRP SDRs via +the UHD driver, as well as the Fairwaves UmTRX and derived products. + +OsmoTRX is not a complete GSM PHY but 'just' the radio modem. This +means that all of the Layer 1 functionality such as scheduling, +convolutional coding, etc. is actually also implemented inside OsmoBTS. +OsmoTRX is a software-defined radio transceiver that implements the Layer 1 +physical layer of a BTS comprising the following 3GPP specifications: + +* TS 05.01 "Physical layer on the radio path" +* TS 05.02 "Multiplexing and Multiple Access on the Radio Path" +* TS 05.04 "Modulation" +* TS 05.10 "Radio subsystem synchronization + +As such, the boundary between OsmoTRX and `osmo-bts-trx` is at +a much lower interface, which is an internal interface of other more +traditional GSM PHY implementations. + +Besides OsmoTRX, there are also other implementations (both Free +Software and proprietary) that implement the same UDP stream based radio +modem interface. + +[[fig-gprs-pcubts]] +.GSM network architecture with OsmoTRX and OsmoBTS +[graphviz] +---- +digraph G { + rankdir=LR; + MS0 [label="MS"]; + MS1 [label="MS"]; + MS0->SDR[label="Um"]; + MS1->SDR [label="Um"]; + SDR -> OsmoTRX [label="Raw Samples"]; + OsmoTRX->BTS [label="bursts over UDP"]; + BTS->BSC [label="Abis"]; + BSC->MSC [label="A"]; + BTS->PCU [label="pcu_sock"]; + PCU->SGSN [label="Gb"]; + OsmoTRX [color=red]; +} +---- diff --git a/doc/manuals/chapters/running.adoc b/doc/manuals/chapters/running.adoc new file mode 100644 index 0000000..7ed2884 --- /dev/null +++ b/doc/manuals/chapters/running.adoc @@ -0,0 +1,19 @@ +== Running OsmoTRX + +The OsmoTRX executable (`osmo-trx`) offers the following command-line +options: + + +=== SYNOPSIS + +*osmo-trx* [-h] [-C 'CONFIGFILE'] + + +=== OPTIONS + +*-h*:: + Print a short help message about the supported options +*-C 'CONFIGFILE'*:: + Specify the file and path name of the configuration file to be + used. If none is specified, use `osmo_trx.cfg` in the current + working directory. diff --git a/doc/manuals/osmotrx-usermanual-docinfo.xml b/doc/manuals/osmotrx-usermanual-docinfo.xml new file mode 100644 index 0000000..34225be --- /dev/null +++ b/doc/manuals/osmotrx-usermanual-docinfo.xml @@ -0,0 +1,46 @@ +<revhistory> + <revision> + <revnumber>1</revnumber> + <date>March 6, 2019</date> + <authorinitials>PE</authorinitials> + <revremark> + Initial version. + </revremark> + </revision> +</revhistory> + +<authorgroup> + <author> + <firstname>Pau</firstname> + <surname>Espin Pedrol</surname> + <email>pespin@sysmocom.de</email> + <authorinitials>PE</authorinitials> + <affiliation> + <shortaffil>sysmocom</shortaffil> + <orgname>sysmocom - s.f.m.c. GmbH</orgname> + <jobtitle>Software Developer</jobtitle> + </affiliation> + </author> +</authorgroup> + +<copyright> + <year>2018</year> + <holder>sysmocom - s.f.m.c. GmbH</holder> +</copyright> + +<legalnotice> + <para> + Permission is granted to copy, distribute and/or modify this + document under the terms of the GNU Free Documentation License, + Version 1.3 or any later version published by the Free Software + Foundation; with no Invariant Sections, no Front-Cover Texts, + and no Back-Cover Texts. A copy of the license is included in + the section entitled "GNU Free Documentation License". + </para> + <para> + The Asciidoc source code of this manual can be found at + <ulink url="http://git.osmocom.org/osmo-gsm-manuals/"> + http://git.osmocom.org/osmo-gsm-manuals/ + </ulink> + </para> +</legalnotice> diff --git a/doc/manuals/osmotrx-usermanual.adoc b/doc/manuals/osmotrx-usermanual.adoc new file mode 100644 index 0000000..249a21c --- /dev/null +++ b/doc/manuals/osmotrx-usermanual.adoc @@ -0,0 +1,32 @@ +:gfdl-enabled: + +OsmoTRX User Manual +==================== +Pau Espin Pedrol <pespin@sysmocom.de> + + +include::../common/chapters/preface.adoc[] + +include::chapters/overview.adoc[] + +include::chapters/running.adoc[] + +include::../common/chapters/control_if.adoc[] + +include::chapters/control.adoc[] + +include::../common/chapters/vty.adoc[] + +include::../common/chapters/logging.adoc[] + +include::chapters/counters.adoc[] + +include::chapters/configuration.adoc[] + +include::../common/chapters/port_numbers.adoc[] + +include::../common/chapters/bibliography.adoc[] + +include::../common/chapters/glossary.adoc[] + +include::../common/chapters/gfdl.adoc[] diff --git a/doc/manuals/osmotrx-vty-reference.xml b/doc/manuals/osmotrx-vty-reference.xml new file mode 100644 index 0000000..653f5b1 --- /dev/null +++ b/doc/manuals/osmotrx-vty-reference.xml @@ -0,0 +1,37 @@ +<?xml version="1.0" encoding="UTF-8"?> +<!-- + ex:ts=2:sw=42sts=2:et + -*- tab-width: 4; c-basic-offset: 4; indent-tabs-mode: nil -*- +--> +<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook V5.0//EN" +"http://www.docbook.org/xml/5.0/dtd/docbook.dtd" [ +<!ENTITY chapter-vty SYSTEM "../common/chapters/vty.xml" > +<!ENTITY sections-vty SYSTEM "generated/docbook_vty.xml" > +]> + +<book> + <info> + <revhistory> + <revision> + <revnumber>v1</revnumber> + <date>6th March 2018</date> + <authorinitials>pe</authorinitials> + <revremark>Initial</revremark> + </revision> + </revhistory> + + <title>OsmoTRX VTY Reference</title> + + <copyright> + <year>2018</year> + </copyright> + + <legalnotice> + <para>This work is copyright by <orgname>sysmocom - s.f.m.c. GmbH</orgname>. All rights reserved. + </para> + </legalnotice> + </info> + + <!-- Main chapters--> + &chapter-vty; +</book> diff --git a/doc/manuals/vty/trx_vty_additions.xml b/doc/manuals/vty/trx_vty_additions.xml new file mode 100644 index 0000000..a4c675e --- /dev/null +++ b/doc/manuals/vty/trx_vty_additions.xml @@ -0,0 +1,2 @@ +<vtydoc xmlns='urn:osmocom:xml:libosmocore:vty:doc:1.0'> +</vtydoc> diff --git a/doc/manuals/vty/trx_vty_reference.xml b/doc/manuals/vty/trx_vty_reference.xml new file mode 100644 index 0000000..ffc642a --- /dev/null +++ b/doc/manuals/vty/trx_vty_reference.xml @@ -0,0 +1,1183 @@ +<vtydoc xmlns='urn:osmocom:xml:libosmocore:vty:doc:1.0'> + <node id='_common_cmds_'> + <name>Common Commands</name> + <description>These commands are available on all VTY nodes. They are listed here only once, to unclutter the VTY reference.</description> + <command id='help'> + <params> + <param name='help' doc='Description of the interactive help system' /> + </params> + </command> + <command id='list'> + <params> + <param name='list' doc='Print command list' /> + </params> + </command> + <command id='write terminal'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='terminal' doc='Write to terminal' /> + </params> + </command> + <command id='write file'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='file' doc='Write to configuration file' /> + </params> + </command> + <command id='write memory'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='memory' doc='Write configuration to the file (same as write file)' /> + </params> + </command> + <command id='write'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + </params> + </command> + <command id='show running-config'> + <params> + <param name='show' doc='Show running system information' /> + <param name='running-config' doc='running configuration' /> + </params> + </command> + <command id='exit'> + <params> + <param name='exit' doc='Exit current mode and down to previous mode' /> + </params> + </command> + <command id='end'> + <params> + <param name='end' doc='End current mode and change to enable mode.' /> + </params> + </command> + </node> + <node id='view'> + <name>view</name> + <command id='show version'> + <params> + <param name='show' doc='Show running system information' /> + <param name='version' doc='Displays program version' /> + </params> + </command> + <command id='show online-help'> + <params> + <param name='show' doc='Show running system information' /> + <param name='online-help' doc='Online help' /> + </params> + </command> + <command id='enable'> + <params> + <param name='enable' doc='Turn on privileged mode command' /> + </params> + </command> + <command id='terminal length <0-512>'> + <params> + <param name='terminal' doc='Set terminal line parameters' /> + <param name='length' doc='Set number of lines on a screen' /> + <param name='<0-512>' doc='Number of lines on screen (0 for no pausing)' /> + </params> + </command> + <command id='terminal no length'> + <params> + <param name='terminal' doc='Set terminal line parameters' /> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='length' doc='Set number of lines on a screen' /> + </params> + </command> + <command id='echo .MESSAGE'> + <params> + <param name='echo' doc='Echo a message back to the vty' /> + <param name='.MESSAGE' doc='The message to echo' /> + </params> + </command> + <command id='who'> + <params> + <param name='who' doc='Display who is on vty' /> + </params> + </command> + <command id='show history'> + <params> + <param name='show' doc='Show running system information' /> + <param name='history' doc='Display the session command history' /> + </params> + </command> + <command id='show trx'> + <params> + <param name='show' doc='Show running system information' /> + <param name='trx' doc='Display information on the TRX' /> + </params> + </command> + <command id='logging enable'> + <params> + <param name='logging' doc='Configure logging' /> + <param name='enable' doc='Enables logging to this vty' /> + </params> + </command> + <command id='logging disable'> + <params> + <param name='logging' doc='Configure logging' /> + <param name='disable' doc='Disables logging to this vty' /> + </params> + </command> + <command id='logging filter all (0|1)'> + <params> + <param name='logging' doc='Configure logging' /> + <param name='filter' doc='Filter log messages' /> + <param name='all' doc='Do you want to log all messages?' /> + <param name='0' doc='Only print messages matched by other filters' /> + <param name='1' doc='Bypass filter and print all messages' /> + </params> + </command> + <command id='logging color (0|1)'> + <params> + <param name='logging' doc='Configure logging' /> + <param name='color' doc='Configure color-printing for log messages' /> + <param name='0' doc='Don't use color for printing messages' /> + <param name='1' doc='Use color for printing messages' /> + </params> + </command> + <command id='logging timestamp (0|1)'> + <params> + <param name='logging' doc='Configure logging' /> + <param name='timestamp' doc='Configure log message timestamping' /> + <param name='0' doc='Don't prefix each log message' /> + <param name='1' doc='Prefix each log message with current timestamp' /> + </params> + </command> + <command id='logging print extended-timestamp (0|1)'> + <params> + <param name='logging' doc='Configure logging' /> + <param name='print' doc='Log output settings' /> + <param name='extended-timestamp' doc='Configure log message timestamping' /> + <param name='0' doc='Don't prefix each log message' /> + <param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' /> + </params> + </command> + <command id='logging print category (0|1)'> + <params> + <param name='logging' doc='Configure logging' /> + <param name='print' doc='Log output settings' /> + <param name='category' doc='Configure log message' /> + <param name='0' doc='Don't prefix each log message' /> + <param name='1' doc='Prefix each log message with category/subsystem name' /> + </params> + </command> + <command id='logging print category-hex (0|1)'> + <params> + <param name='logging' doc='Configure logging' /> + <param name='print' doc='Log output settings' /> + <param name='category-hex' doc='Configure log message' /> + <param name='0' doc='Don't prefix each log message' /> + <param name='1' doc='Prefix each log message with category/subsystem nr in hex ('<000b>')' /> + </params> + </command> + <command id='logging print level (0|1)'> + <params> + <param name='logging' doc='Configure logging' /> + <param name='print' doc='Log output settings' /> + <param name='level' doc='Configure log message' /> + <param name='0' doc='Don't prefix each log message' /> + <param name='1' doc='Prefix each log message with the log level name' /> + </params> + </command> + <command id='logging print file (0|1|basename)'> + <params> + <param name='logging' doc='Configure logging' /> + <param name='print' doc='Log output settings' /> + <param name='file' doc='Configure log message' /> + <param name='0' doc='Don't prefix each log message' /> + <param name='1' doc='Prefix each log message with the source file and line' /> + <param name='basename' doc='Prefix each log message with the source file's basename (strip leading paths) and line' /> + </params> + </command> + <command id='logging set-log-mask MASK'> + <params> + <param name='logging' doc='Configure logging' /> + <param name='set-log-mask' doc='Set the logmask of this logging target' /> + <param name='MASK' doc='List of logging categories to log, e.g. 'abc:mno:xyz'. Available log categories depend on the specific application, refer to the 'logging level' command. Optionally add individual log levels like 'abc,1:mno,3:xyz,5', where the level numbers are LOGL_DEBUG=1 LOGL_INFO=3 LOGL_NOTICE=5 LOGL_ERROR=7 LOGL_FATAL=8' /> + </params> + </command> + <command id='logging set log mask MASK'> + <params> + <param name='logging' doc='Configure logging' /> + <param name='set' doc='Decide which categories to output.' /> + <param name='log' doc='Log commands' /> + <param name='mask' doc='Mask commands' /> + <param name='MASK' doc=''set log mask' is deprecated, please refer to the docs of 'set-log-mask' instead' /> + </params> + </command> + <command id='logging level (all|main|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf) (everything|debug|info|notice|error|fatal)'> + <params> + <param name='logging' doc='Configure logging' /> + <param name='level' doc='Set the log level for a specified category' /> + <param name='all' doc='Global setting for all subsystems' /> + <param name='main' doc='Main generic category' /> + <param name='lglobal' doc='Library-internal global log family' /> + <param name='llapd' doc='LAPD in libosmogsm' /> + <param name='linp' doc='A-bis Intput Subsystem' /> + <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' /> + <param name='lmi' doc='A-bis Input Driver for Signalling' /> + <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' /> + <param name='lsms' doc='Layer3 Short Message Service (SMS)' /> + <param name='lctrl' doc='Control Interface' /> + <param name='lgtp' doc='GPRS GTP library' /> + <param name='lstats' doc='Statistics messages and logging' /> + <param name='lgsup' doc='Generic Subscriber Update Protocol' /> + <param name='loap' doc='Osmocom Authentication Protocol' /> + <param name='lss7' doc='libosmo-sigtran Signalling System 7' /> + <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' /> + <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' /> + <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' /> + <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' /> + <param name='ljibuf' doc='libosmo-netif Jitter Buffer' /> + <param name='everything' doc='Don't use. It doesn't log anything' /> + <param name='debug' doc='Log debug messages and higher levels' /> + <param name='info' doc='Log informational messages and higher levels' /> + <param name='notice' doc='Log noticeable messages and higher levels' /> + <param name='error' doc='Log error messages and higher levels' /> + <param name='fatal' doc='Log only fatal messages' /> + </params> + </command> + <command id='show logging vty'> + <params> + <param name='show' doc='Show running system information' /> + <param name='logging' doc='Show current logging configuration' /> + <param name='vty' doc='Show current logging configuration for this vty' /> + </params> + </command> + <command id='show alarms'> + <params> + <param name='show' doc='Show running system information' /> + <param name='alarms' doc='Show current logging configuration' /> + </params> + </command> + <command id='show talloc-context (application|all) (full|brief|DEPTH)'> + <params> + <param name='show' doc='Show running system information' /> + <param name='talloc-context' doc='Show talloc memory hierarchy' /> + <param name='application' doc='Application's context' /> + <param name='all' doc='All contexts, if NULL-context tracking is enabled' /> + <param name='full' doc='Display a full talloc memory hierarchy' /> + <param name='brief' doc='Display a brief talloc memory hierarchy' /> + <param name='DEPTH' doc='Specify required maximal depth value' /> + </params> + </command> + <command id='show talloc-context (application|all) (full|brief|DEPTH) tree ADDRESS'> + <params> + <param name='show' doc='Show running system information' /> + <param name='talloc-context' doc='Show talloc memory hierarchy' /> + <param name='application' doc='Application's context' /> + <param name='all' doc='All contexts, if NULL-context tracking is enabled' /> + <param name='full' doc='Display a full talloc memory hierarchy' /> + <param name='brief' doc='Display a brief talloc memory hierarchy' /> + <param name='DEPTH' doc='Specify required maximal depth value' /> + <param name='tree' doc='Display only a specific memory chunk' /> + <param name='ADDRESS' doc='Chunk address (e.g. 0xdeadbeef)' /> + </params> + </command> + <command id='show talloc-context (application|all) (full|brief|DEPTH) filter REGEXP'> + <params> + <param name='show' doc='Show running system information' /> + <param name='talloc-context' doc='Show talloc memory hierarchy' /> + <param name='application' doc='Application's context' /> + <param name='all' doc='All contexts, if NULL-context tracking is enabled' /> + <param name='full' doc='Display a full talloc memory hierarchy' /> + <param name='brief' doc='Display a brief talloc memory hierarchy' /> + <param name='DEPTH' doc='Specify required maximal depth value' /> + <param name='filter' doc='Filter chunks using regular expression' /> + <param name='REGEXP' doc='Regular expression' /> + </params> + </command> + <command id='show stats'> + <params> + <param name='show' doc='Show running system information' /> + <param name='stats' doc='Show statistical values' /> + </params> + </command> + <command id='show stats level (global|peer|subscriber)'> + <params> + <param name='show' doc='Show running system information' /> + <param name='stats' doc='Show statistical values' /> + <param name='level' doc='Set the maximum group level' /> + <param name='global' doc='Show global groups only' /> + <param name='peer' doc='Show global and network peer related groups' /> + <param name='subscriber' doc='Show global, peer, and subscriber groups' /> + </params> + </command> + <command id='show asciidoc counters'> + <params> + <param name='show' doc='Show running system information' /> + <param name='asciidoc' doc='Asciidoc generation' /> + <param name='counters' doc='Generate table of all registered counters' /> + </params> + </command> + </node> + <node id='enable'> + <name>enable</name> + <command id='disable'> + <params> + <param name='disable' doc='Turn off privileged mode command' /> + </params> + </command> + <command id='configure terminal'> + <params> + <param name='configure' doc='Configuration from vty interface' /> + <param name='terminal' doc='Configuration terminal' /> + </params> + </command> + <command id='copy running-config startup-config'> + <params> + <param name='copy' doc='Copy configuration' /> + <param name='running-config' doc='Copy running config to... ' /> + <param name='startup-config' doc='Copy running config to startup config (same as write file)' /> + </params> + </command> + <command id='show startup-config'> + <params> + <param name='show' doc='Show running system information' /> + <param name='startup-config' doc='Contentes of startup configuration' /> + </params> + </command> + <command id='show version'> + <params> + <param name='show' doc='Show running system information' /> + <param name='version' doc='Displays program version' /> + </params> + </command> + <command id='show online-help'> + <params> + <param name='show' doc='Show running system information' /> + <param name='online-help' doc='Online help' /> + </params> + </command> + <command id='terminal length <0-512>'> + <params> + <param name='terminal' doc='Set terminal line parameters' /> + <param name='length' doc='Set number of lines on a screen' /> + <param name='<0-512>' doc='Number of lines on screen (0 for no pausing)' /> + </params> + </command> + <command id='terminal no length'> + <params> + <param name='terminal' doc='Set terminal line parameters' /> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='length' doc='Set number of lines on a screen' /> + </params> + </command> + <command id='echo .MESSAGE'> + <params> + <param name='echo' doc='Echo a message back to the vty' /> + <param name='.MESSAGE' doc='The message to echo' /> + </params> + </command> + <command id='who'> + <params> + <param name='who' doc='Display who is on vty' /> + </params> + </command> + <command id='show history'> + <params> + <param name='show' doc='Show running system information' /> + <param name='history' doc='Display the session command history' /> + </params> + </command> + <command id='terminal monitor'> + <params> + <param name='terminal' doc='Set terminal line parameters' /> + <param name='monitor' doc='Copy debug output to the current terminal line' /> + </params> + </command> + <command id='terminal no monitor'> + <params> + <param name='terminal' doc='Set terminal line parameters' /> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='monitor' doc='Copy debug output to the current terminal line' /> + </params> + </command> + <command id='show trx'> + <params> + <param name='show' doc='Show running system information' /> + <param name='trx' doc='Display information on the TRX' /> + </params> + </command> + <command id='logging enable'> + <params> + <param name='logging' doc='Configure logging' /> + <param name='enable' doc='Enables logging to this vty' /> + </params> + </command> + <command id='logging disable'> + <params> + <param name='logging' doc='Configure logging' /> + <param name='disable' doc='Disables logging to this vty' /> + </params> + </command> + <command id='logging filter all (0|1)'> + <params> + <param name='logging' doc='Configure logging' /> + <param name='filter' doc='Filter log messages' /> + <param name='all' doc='Do you want to log all messages?' /> + <param name='0' doc='Only print messages matched by other filters' /> + <param name='1' doc='Bypass filter and print all messages' /> + </params> + </command> + <command id='logging color (0|1)'> + <params> + <param name='logging' doc='Configure logging' /> + <param name='color' doc='Configure color-printing for log messages' /> + <param name='0' doc='Don't use color for printing messages' /> + <param name='1' doc='Use color for printing messages' /> + </params> + </command> + <command id='logging timestamp (0|1)'> + <params> + <param name='logging' doc='Configure logging' /> + <param name='timestamp' doc='Configure log message timestamping' /> + <param name='0' doc='Don't prefix each log message' /> + <param name='1' doc='Prefix each log message with current timestamp' /> + </params> + </command> + <command id='logging print extended-timestamp (0|1)'> + <params> + <param name='logging' doc='Configure logging' /> + <param name='print' doc='Log output settings' /> + <param name='extended-timestamp' doc='Configure log message timestamping' /> + <param name='0' doc='Don't prefix each log message' /> + <param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' /> + </params> + </command> + <command id='logging print category (0|1)'> + <params> + <param name='logging' doc='Configure logging' /> + <param name='print' doc='Log output settings' /> + <param name='category' doc='Configure log message' /> + <param name='0' doc='Don't prefix each log message' /> + <param name='1' doc='Prefix each log message with category/subsystem name' /> + </params> + </command> + <command id='logging print category-hex (0|1)'> + <params> + <param name='logging' doc='Configure logging' /> + <param name='print' doc='Log output settings' /> + <param name='category-hex' doc='Configure log message' /> + <param name='0' doc='Don't prefix each log message' /> + <param name='1' doc='Prefix each log message with category/subsystem nr in hex ('<000b>')' /> + </params> + </command> + <command id='logging print level (0|1)'> + <params> + <param name='logging' doc='Configure logging' /> + <param name='print' doc='Log output settings' /> + <param name='level' doc='Configure log message' /> + <param name='0' doc='Don't prefix each log message' /> + <param name='1' doc='Prefix each log message with the log level name' /> + </params> + </command> + <command id='logging print file (0|1|basename)'> + <params> + <param name='logging' doc='Configure logging' /> + <param name='print' doc='Log output settings' /> + <param name='file' doc='Configure log message' /> + <param name='0' doc='Don't prefix each log message' /> + <param name='1' doc='Prefix each log message with the source file and line' /> + <param name='basename' doc='Prefix each log message with the source file's basename (strip leading paths) and line' /> + </params> + </command> + <command id='logging set-log-mask MASK'> + <params> + <param name='logging' doc='Configure logging' /> + <param name='set-log-mask' doc='Set the logmask of this logging target' /> + <param name='MASK' doc='List of logging categories to log, e.g. 'abc:mno:xyz'. Available log categories depend on the specific application, refer to the 'logging level' command. Optionally add individual log levels like 'abc,1:mno,3:xyz,5', where the level numbers are LOGL_DEBUG=1 LOGL_INFO=3 LOGL_NOTICE=5 LOGL_ERROR=7 LOGL_FATAL=8' /> + </params> + </command> + <command id='logging set log mask MASK'> + <params> + <param name='logging' doc='Configure logging' /> + <param name='set' doc='Decide which categories to output.' /> + <param name='log' doc='Log commands' /> + <param name='mask' doc='Mask commands' /> + <param name='MASK' doc=''set log mask' is deprecated, please refer to the docs of 'set-log-mask' instead' /> + </params> + </command> + <command id='logging level (all|main|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf) (everything|debug|info|notice|error|fatal)'> + <params> + <param name='logging' doc='Configure logging' /> + <param name='level' doc='Set the log level for a specified category' /> + <param name='all' doc='Global setting for all subsystems' /> + <param name='main' doc='Main generic category' /> + <param name='lglobal' doc='Library-internal global log family' /> + <param name='llapd' doc='LAPD in libosmogsm' /> + <param name='linp' doc='A-bis Intput Subsystem' /> + <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' /> + <param name='lmi' doc='A-bis Input Driver for Signalling' /> + <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' /> + <param name='lsms' doc='Layer3 Short Message Service (SMS)' /> + <param name='lctrl' doc='Control Interface' /> + <param name='lgtp' doc='GPRS GTP library' /> + <param name='lstats' doc='Statistics messages and logging' /> + <param name='lgsup' doc='Generic Subscriber Update Protocol' /> + <param name='loap' doc='Osmocom Authentication Protocol' /> + <param name='lss7' doc='libosmo-sigtran Signalling System 7' /> + <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' /> + <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' /> + <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' /> + <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' /> + <param name='ljibuf' doc='libosmo-netif Jitter Buffer' /> + <param name='everything' doc='Don't use. It doesn't log anything' /> + <param name='debug' doc='Log debug messages and higher levels' /> + <param name='info' doc='Log informational messages and higher levels' /> + <param name='notice' doc='Log noticeable messages and higher levels' /> + <param name='error' doc='Log error messages and higher levels' /> + <param name='fatal' doc='Log only fatal messages' /> + </params> + </command> + <command id='show logging vty'> + <params> + <param name='show' doc='Show running system information' /> + <param name='logging' doc='Show current logging configuration' /> + <param name='vty' doc='Show current logging configuration for this vty' /> + </params> + </command> + <command id='show alarms'> + <params> + <param name='show' doc='Show running system information' /> + <param name='alarms' doc='Show current logging configuration' /> + </params> + </command> + <command id='show talloc-context (application|all) (full|brief|DEPTH)'> + <params> + <param name='show' doc='Show running system information' /> + <param name='talloc-context' doc='Show talloc memory hierarchy' /> + <param name='application' doc='Application's context' /> + <param name='all' doc='All contexts, if NULL-context tracking is enabled' /> + <param name='full' doc='Display a full talloc memory hierarchy' /> + <param name='brief' doc='Display a brief talloc memory hierarchy' /> + <param name='DEPTH' doc='Specify required maximal depth value' /> + </params> + </command> + <command id='show talloc-context (application|all) (full|brief|DEPTH) tree ADDRESS'> + <params> + <param name='show' doc='Show running system information' /> + <param name='talloc-context' doc='Show talloc memory hierarchy' /> + <param name='application' doc='Application's context' /> + <param name='all' doc='All contexts, if NULL-context tracking is enabled' /> + <param name='full' doc='Display a full talloc memory hierarchy' /> + <param name='brief' doc='Display a brief talloc memory hierarchy' /> + <param name='DEPTH' doc='Specify required maximal depth value' /> + <param name='tree' doc='Display only a specific memory chunk' /> + <param name='ADDRESS' doc='Chunk address (e.g. 0xdeadbeef)' /> + </params> + </command> + <command id='show talloc-context (application|all) (full|brief|DEPTH) filter REGEXP'> + <params> + <param name='show' doc='Show running system information' /> + <param name='talloc-context' doc='Show talloc memory hierarchy' /> + <param name='application' doc='Application's context' /> + <param name='all' doc='All contexts, if NULL-context tracking is enabled' /> + <param name='full' doc='Display a full talloc memory hierarchy' /> + <param name='brief' doc='Display a brief talloc memory hierarchy' /> + <param name='DEPTH' doc='Specify required maximal depth value' /> + <param name='filter' doc='Filter chunks using regular expression' /> + <param name='REGEXP' doc='Regular expression' /> + </params> + </command> + <command id='show stats'> + <params> + <param name='show' doc='Show running system information' /> + <param name='stats' doc='Show statistical values' /> + </params> + </command> + <command id='show stats level (global|peer|subscriber)'> + <params> + <param name='show' doc='Show running system information' /> + <param name='stats' doc='Show statistical values' /> + <param name='level' doc='Set the maximum group level' /> + <param name='global' doc='Show global groups only' /> + <param name='peer' doc='Show global and network peer related groups' /> + <param name='subscriber' doc='Show global, peer, and subscriber groups' /> + </params> + </command> + <command id='show asciidoc counters'> + <params> + <param name='show' doc='Show running system information' /> + <param name='asciidoc' doc='Asciidoc generation' /> + <param name='counters' doc='Generate table of all registered counters' /> + </params> + </command> + </node> + <node id='config'> + <name>config</name> + <command id='hostname WORD'> + <params> + <param name='hostname' doc='Set system's network name' /> + <param name='WORD' doc='This system's network name' /> + </params> + </command> + <command id='no hostname [HOSTNAME]'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='hostname' doc='Reset system's network name' /> + <param name='[HOSTNAME]' doc='Host name of this router' /> + </params> + </command> + <command id='password (8|) WORD'> + <params> + <param name='password' doc='Assign the terminal connection password' /> + <param name='8' doc='Specifies a HIDDEN password will follow' /> + <param name='' doc='dummy string ' /> + <param name='WORD' doc='The HIDDEN line password string' /> + </params> + </command> + <command id='password LINE'> + <params> + <param name='password' doc='Assign the terminal connection password' /> + <param name='LINE' doc='The UNENCRYPTED (cleartext) line password' /> + </params> + </command> + <command id='enable password (8|) WORD'> + <params> + <param name='enable' doc='Modify enable password parameters' /> + <param name='password' doc='Assign the privileged level password' /> + <param name='8' doc='Specifies a HIDDEN password will follow' /> + <param name='' doc='dummy string ' /> + <param name='WORD' doc='The HIDDEN 'enable' password string' /> + </params> + </command> + <command id='enable password LINE'> + <params> + <param name='enable' doc='Modify enable password parameters' /> + <param name='password' doc='Assign the privileged level password' /> + <param name='LINE' doc='The UNENCRYPTED (cleartext) 'enable' password' /> + </params> + </command> + <command id='no enable password'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='enable' doc='Modify enable password parameters' /> + <param name='password' doc='Assign the privileged level password' /> + </params> + </command> + <command id='banner motd default'> + <params> + <param name='banner' doc='Set banner string' /> + <param name='motd' doc='Strings for motd' /> + <param name='default' doc='Default string' /> + </params> + </command> + <command id='banner motd file [FILE]'> + <params> + <param name='banner' doc='Set banner' /> + <param name='motd' doc='Banner for motd' /> + <param name='file' doc='Banner from a file' /> + <param name='[FILE]' doc='Filename' /> + </params> + </command> + <command id='no banner motd'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='banner' doc='Set banner string' /> + <param name='motd' doc='Strings for motd' /> + </params> + </command> + <command id='service terminal-length <0-512>'> + <params> + <param name='service' doc='Set up miscellaneous service' /> + <param name='terminal-length' doc='System wide terminal length configuration' /> + <param name='<0-512>' doc='Number of lines of VTY (0 means no line control)' /> + </params> + </command> + <command id='no service terminal-length [<0-512>]'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='service' doc='Set up miscellaneous service' /> + <param name='terminal-length' doc='System wide terminal length configuration' /> + <param name='[<0-512>]' doc='Number of lines of VTY (0 means no line control)' /> + </params> + </command> + <command id='line vty'> + <params> + <param name='line' doc='Configure a terminal line' /> + <param name='vty' doc='Virtual terminal' /> + </params> + </command> + <command id='service advanced-vty'> + <params> + <param name='service' doc='Set up miscellaneous service' /> + <param name='advanced-vty' doc='Enable advanced mode vty interface' /> + </params> + </command> + <command id='no service advanced-vty'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='service' doc='Set up miscellaneous service' /> + <param name='advanced-vty' doc='Enable advanced mode vty interface' /> + </params> + </command> + <command id='show history'> + <params> + <param name='show' doc='Show running system information' /> + <param name='history' doc='Display the session command history' /> + </params> + </command> + <command id='ctrl'> + <params> + <param name='ctrl' doc='Configure the Control Interface' /> + </params> + </command> + <command id='trx'> + <params> + <param name='trx' doc='Configure the TRX' /> + </params> + </command> + <command id='log stderr'> + <params> + <param name='log' doc='Configure logging sub-system' /> + <param name='stderr' doc='Logging via STDERR of the process' /> + </params> + </command> + <command id='no log stderr'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='log' doc='Configure logging sub-system' /> + <param name='stderr' doc='Logging via STDERR of the process' /> + </params> + </command> + <command id='log file .FILENAME'> + <params> + <param name='log' doc='Configure logging sub-system' /> + <param name='file' doc='Logging to text file' /> + <param name='.FILENAME' doc='Filename' /> + </params> + </command> + <command id='no log file .FILENAME'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='log' doc='Configure logging sub-system' /> + <param name='file' doc='Logging to text file' /> + <param name='.FILENAME' doc='Filename' /> + </params> + </command> + <command id='log alarms <2-32700>'> + <params> + <param name='log' doc='Configure logging sub-system' /> + <param name='alarms' doc='Logging alarms to osmo_strrb' /> + <param name='<2-32700>' doc='Maximum number of messages to log' /> + </params> + </command> + <command id='no log alarms'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='log' doc='Configure logging sub-system' /> + <param name='alarms' doc='Logging alarms to osmo_strrb' /> + </params> + </command> + <command id='log syslog (authpriv|cron|daemon|ftp|lpr|mail|news|user|uucp)'> + <params> + <param name='log' doc='Configure logging sub-system' /> + <param name='syslog' doc='Logging via syslog' /> + <param name='authpriv' doc='Security/authorization messages facility' /> + <param name='cron' doc='Clock daemon (cron/at) facility' /> + <param name='daemon' doc='General system daemon facility' /> + <param name='ftp' doc='Ftp daemon facility' /> + <param name='lpr' doc='Line printer facility' /> + <param name='mail' doc='Mail facility' /> + <param name='news' doc='News facility' /> + <param name='user' doc='Generic facility' /> + <param name='uucp' doc='UUCP facility' /> + </params> + </command> + <command id='log syslog local <0-7>'> + <params> + <param name='log' doc='Configure logging sub-system' /> + <param name='syslog' doc='Logging via syslog' /> + <param name='local' doc='Syslog LOCAL facility' /> + <param name='<0-7>' doc='Local facility number' /> + </params> + </command> + <command id='no log syslog'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='log' doc='Configure logging sub-system' /> + <param name='syslog' doc='Logging via syslog' /> + </params> + </command> + <command id='log gsmtap [HOSTNAME]'> + <params> + <param name='log' doc='Configure logging sub-system' /> + <param name='gsmtap' doc='Logging via GSMTAP' /> + <param name='[HOSTNAME]' doc='Host name to send the GSMTAP logging to (UDP port 4729)' /> + </params> + </command> + <command id='stats reporter statsd'> + <params> + <param name='stats' doc='Configure stats sub-system' /> + <param name='reporter' doc='Configure a stats reporter' /> + <param name='statsd' doc='Report to a STATSD server' /> + </params> + </command> + <command id='no stats reporter statsd'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='stats' doc='Configure stats sub-system' /> + <param name='reporter' doc='Configure a stats reporter' /> + <param name='statsd' doc='Report to a STATSD server' /> + </params> + </command> + <command id='stats reporter log'> + <params> + <param name='stats' doc='Configure stats sub-system' /> + <param name='reporter' doc='Configure a stats reporter' /> + <param name='log' doc='Report to the logger' /> + </params> + </command> + <command id='no stats reporter log'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='stats' doc='Configure stats sub-system' /> + <param name='reporter' doc='Configure a stats reporter' /> + <param name='log' doc='Report to the logger' /> + </params> + </command> + <command id='stats interval <1-65535>'> + <params> + <param name='stats' doc='Configure stats sub-system' /> + <param name='interval' doc='Set the reporting interval' /> + <param name='<1-65535>' doc='Interval in seconds' /> + </params> + </command> + </node> + <node id='config-log'> + <name>config-log</name> + <command id='logging filter all (0|1)'> + <params> + <param name='logging' doc='Configure logging' /> + <param name='filter' doc='Filter log messages' /> + <param name='all' doc='Do you want to log all messages?' /> + <param name='0' doc='Only print messages matched by other filters' /> + <param name='1' doc='Bypass filter and print all messages' /> + </params> + </command> + <command id='logging color (0|1)'> + <params> + <param name='logging' doc='Configure logging' /> + <param name='color' doc='Configure color-printing for log messages' /> + <param name='0' doc='Don't use color for printing messages' /> + <param name='1' doc='Use color for printing messages' /> + </params> + </command> + <command id='logging timestamp (0|1)'> + <params> + <param name='logging' doc='Configure logging' /> + <param name='timestamp' doc='Configure log message timestamping' /> + <param name='0' doc='Don't prefix each log message' /> + <param name='1' doc='Prefix each log message with current timestamp' /> + </params> + </command> + <command id='logging print extended-timestamp (0|1)'> + <params> + <param name='logging' doc='Configure logging' /> + <param name='print' doc='Log output settings' /> + <param name='extended-timestamp' doc='Configure log message timestamping' /> + <param name='0' doc='Don't prefix each log message' /> + <param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' /> + </params> + </command> + <command id='logging print category (0|1)'> + <params> + <param name='logging' doc='Configure logging' /> + <param name='print' doc='Log output settings' /> + <param name='category' doc='Configure log message' /> + <param name='0' doc='Don't prefix each log message' /> + <param name='1' doc='Prefix each log message with category/subsystem name' /> + </params> + </command> + <command id='logging print category-hex (0|1)'> + <params> + <param name='logging' doc='Configure logging' /> + <param name='print' doc='Log output settings' /> + <param name='category-hex' doc='Configure log message' /> + <param name='0' doc='Don't prefix each log message' /> + <param name='1' doc='Prefix each log message with category/subsystem nr in hex ('<000b>')' /> + </params> + </command> + <command id='logging print level (0|1)'> + <params> + <param name='logging' doc='Configure logging' /> + <param name='print' doc='Log output settings' /> + <param name='level' doc='Configure log message' /> + <param name='0' doc='Don't prefix each log message' /> + <param name='1' doc='Prefix each log message with the log level name' /> + </params> + </command> + <command id='logging print file (0|1|basename)'> + <params> + <param name='logging' doc='Configure logging' /> + <param name='print' doc='Log output settings' /> + <param name='file' doc='Configure log message' /> + <param name='0' doc='Don't prefix each log message' /> + <param name='1' doc='Prefix each log message with the source file and line' /> + <param name='basename' doc='Prefix each log message with the source file's basename (strip leading paths) and line' /> + </params> + </command> + <command id='logging level (all|main|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf) (everything|debug|info|notice|error|fatal)'> + <params> + <param name='logging' doc='Configure logging' /> + <param name='level' doc='Set the log level for a specified category' /> + <param name='all' doc='Global setting for all subsystems' /> + <param name='main' doc='Main generic category' /> + <param name='lglobal' doc='Library-internal global log family' /> + <param name='llapd' doc='LAPD in libosmogsm' /> + <param name='linp' doc='A-bis Intput Subsystem' /> + <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' /> + <param name='lmi' doc='A-bis Input Driver for Signalling' /> + <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' /> + <param name='lsms' doc='Layer3 Short Message Service (SMS)' /> + <param name='lctrl' doc='Control Interface' /> + <param name='lgtp' doc='GPRS GTP library' /> + <param name='lstats' doc='Statistics messages and logging' /> + <param name='lgsup' doc='Generic Subscriber Update Protocol' /> + <param name='loap' doc='Osmocom Authentication Protocol' /> + <param name='lss7' doc='libosmo-sigtran Signalling System 7' /> + <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' /> + <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' /> + <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' /> + <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' /> + <param name='ljibuf' doc='libosmo-netif Jitter Buffer' /> + <param name='everything' doc='Don't use. It doesn't log anything' /> + <param name='debug' doc='Log debug messages and higher levels' /> + <param name='info' doc='Log informational messages and higher levels' /> + <param name='notice' doc='Log noticeable messages and higher levels' /> + <param name='error' doc='Log error messages and higher levels' /> + <param name='fatal' doc='Log only fatal messages' /> + </params> + </command> + </node> + <node id='config-stats'> + <name>config-stats</name> + <command id='local-ip ADDR'> + <params> + <param name='local-ip' doc='Set the IP address to which we bind locally' /> + <param name='ADDR' doc='IP Address' /> + </params> + </command> + <command id='no local-ip'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='local-ip' doc='Set the IP address to which we bind locally' /> + </params> + </command> + <command id='remote-ip ADDR'> + <params> + <param name='remote-ip' doc='Set the remote IP address to which we connect' /> + <param name='ADDR' doc='IP Address' /> + </params> + </command> + <command id='remote-port <1-65535>'> + <params> + <param name='remote-port' doc='Set the remote port to which we connect' /> + <param name='<1-65535>' doc='Remote port number' /> + </params> + </command> + <command id='mtu <100-65535>'> + <params> + <param name='mtu' doc='Set the maximum packet size' /> + <param name='<100-65535>' doc='Size in byte' /> + </params> + </command> + <command id='no mtu'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='mtu' doc='Set the maximum packet size' /> + </params> + </command> + <command id='prefix PREFIX'> + <params> + <param name='prefix' doc='Set the item name prefix' /> + <param name='PREFIX' doc='The prefix string' /> + </params> + </command> + <command id='no prefix'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='prefix' doc='Set the item name prefix' /> + </params> + </command> + <command id='level (global|peer|subscriber)'> + <params> + <param name='level' doc='Set the maximum group level' /> + <param name='global' doc='Report global groups only' /> + <param name='peer' doc='Report global and network peer related groups' /> + <param name='subscriber' doc='Report global, peer, and subscriber groups' /> + </params> + </command> + <command id='enable'> + <params> + <param name='enable' doc='Enable the reporter' /> + </params> + </command> + <command id='disable'> + <params> + <param name='disable' doc='Disable the reporter' /> + </params> + </command> + </node> + <node id='config-line'> + <name>config-line</name> + <command id='login'> + <params> + <param name='login' doc='Enable password checking' /> + </params> + </command> + <command id='no login'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='login' doc='Enable password checking' /> + </params> + </command> + <command id='bind A.B.C.D'> + <params> + <param name='bind' doc='Accept VTY telnet connections on local interface' /> + <param name='A.B.C.D' doc='Local interface IP address (default: 127.0.0.1)' /> + </params> + </command> + </node> + <node id='config-ctrl'> + <name>config-ctrl</name> + <command id='bind A.B.C.D'> + <params> + <param name='bind' doc='Set bind address to listen for Control connections' /> + <param name='A.B.C.D' doc='Local IP address (default 127.0.0.1)' /> + </params> + </command> + </node> + <node id='config-trx'> + <name>config-trx</name> + <command id='bind-ip A.B.C.D'> + <params> + <param name='bind-ip' doc='Set the IP address for the local bind' /> + <param name='A.B.C.D' doc='IPv4 Address' /> + </params> + </command> + <command id='remote-ip A.B.C.D'> + <params> + <param name='remote-ip' doc='Set the IP address for the remote BTS' /> + <param name='A.B.C.D' doc='IPv4 Address' /> + </params> + </command> + <command id='base-port <1-65535>'> + <params> + <param name='base-port' doc='Set the TRX Base Port' /> + <param name='<1-65535>' doc='TRX Base Port' /> + </params> + </command> + <command id='dev-args DESC'> + <params> + <param name='dev-args' doc='Set the device-specific arguments to pass to the device' /> + <param name='DESC' doc='Device-specific arguments' /> + </params> + </command> + <command id='tx-sps (1|4)'> + <params> + <param name='tx-sps' doc='Set the Tx Samples-per-Symbol' /> + <param name='1' doc='Tx Samples-per-Symbol' /> + <param name='4' doc='(null)' /> + </params> + </command> + <command id='rx-sps (1|4)'> + <params> + <param name='rx-sps' doc='Set the Rx Samples-per-Symbol' /> + <param name='1' doc='Rx Samples-per-Symbol' /> + <param name='4' doc='(null)' /> + </params> + </command> + <command id='test rtsc <0-7>'> + <params> + <param name='test' doc='Set the Random Normal Burst test mode with TSC' /> + <param name='rtsc' doc='TSC' /> + <param name='<0-7>' doc='(null)' /> + </params> + </command> + <command id='test rach-delay <0-68>'> + <params> + <param name='test' doc='Set the Random Access Burst test mode with delay' /> + <param name='rach-delay' doc='RACH delay' /> + <param name='<0-68>' doc='(null)' /> + </params> + </command> + <command id='clock-ref (internal|external|gpsdo)'> + <params> + <param name='clock-ref' doc='Set the Reference Clock' /> + <param name='internal' doc='Enable internal referece (default)' /> + <param name='external' doc='Enable external 10 MHz reference' /> + <param name='gpsdo' doc='Enable GPSDO reference' /> + </params> + </command> + <command id='multi-arfcn (disable|enable)'> + <params> + <param name='multi-arfcn' doc='Enable multi-ARFCN transceiver (default=disable)' /> + <param name='disable' doc='(null)' /> + <param name='enable' doc='(null)' /> + </params> + </command> + <command id='offset FLOAT'> + <params> + <param name='offset' doc='Set the baseband frequency offset (default=0, auto)' /> + <param name='FLOAT' doc='Baseband Frequency Offset' /> + </params> + </command> + <command id='rssi-offset FLOAT'> + <params> + <param name='rssi-offset' doc='Set the RSSI to dBm offset in dB (default=0)' /> + <param name='FLOAT' doc='RSSI to dBm offset in dB' /> + </params> + </command> + <command id='swap-channels (disable|enable)'> + <params> + <param name='swap-channels' doc='Swap channels (default=disable)' /> + <param name='disable' doc='(null)' /> + <param name='enable' doc='(null)' /> + </params> + </command> + <command id='egprs (disable|enable)'> + <params> + <param name='egprs' doc='Enable EDGE receiver (default=disable)' /> + <param name='disable' doc='(null)' /> + <param name='enable' doc='(null)' /> + </params> + </command> + <command id='rt-prio <1-32>'> + <params> + <param name='rt-prio' doc='Set the SCHED_RR real-time priority' /> + <param name='<1-32>' doc='Real time priority' /> + </params> + </command> + <command id='filler dummy'> + <params> + <param name='filler' doc='Enable C0 filler table' /> + <param name='dummy' doc='Dummy method' /> + </params> + </command> + <command id='chan <0-100>'> + <params> + <param name='chan' doc='Select a channel to configure' /> + <param name='<0-100>' doc='Channel index' /> + </params> + </command> + </node> + <node id='config-trx-chan'> + <name>config-trx-chan</name> + <command id='rx-path NAME'> + <params> + <param name='rx-path' doc='Set the Rx Path' /> + <param name='NAME' doc='Rx Path name' /> + </params> + </command> + <command id='tx-path NAME'> + <params> + <param name='tx-path' doc='Set the Tx Path' /> + <param name='NAME' doc='Tx Path name' /> + </params> + </command> + </node> +</vtydoc> |