diff options
Diffstat (limited to 'src/utils/bs11_config.c')
| -rw-r--r-- | src/utils/bs11_config.c | 953 |
1 files changed, 0 insertions, 953 deletions
diff --git a/src/utils/bs11_config.c b/src/utils/bs11_config.c deleted file mode 100644 index a0f3cb757..000000000 --- a/src/utils/bs11_config.c +++ /dev/null @@ -1,953 +0,0 @@ -/* Siemens BS-11 microBTS configuration tool */ - -/* (C) 2009-2010 by Harald Welte <laforge@gnumonks.org> - * All Rights Reserved - * - * This software is based on ideas (but not code) of BS11Config - * (C) 2009 by Dieter Spaar <spaar@mirider.augusta.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU Affero General Public License as published by - * the Free Software Foundation; either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU Affero General Public License for more details. - * - * You should have received a copy of the GNU Affero General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - * - */ - -#include <unistd.h> -#include <stdlib.h> -#include <stdio.h> -#include <errno.h> -#include <string.h> -#include <getopt.h> -#include <fcntl.h> -#include <signal.h> - -#include <sys/stat.h> - -#include <openbsc/common_bsc.h> -#include <openbsc/abis_nm.h> -#include <osmocom/core/msgb.h> -#include <osmocom/core/utils.h> -#include <osmocom/gsm/tlv.h> -#include <openbsc/debug.h> -#include <osmocom/core/select.h> -#include <openbsc/rs232.h> -#include <osmocom/core/application.h> -#include <osmocom/core/talloc.h> -#include <osmocom/abis/abis.h> -#include <osmocom/abis/e1_input.h> - -static void *tall_bs11cfg_ctx; -static struct e1inp_sign_link *oml_link; - -/* state of our bs11_config application */ -enum bs11cfg_state { - STATE_NONE, - STATE_LOGON_WAIT, - STATE_LOGON_ACK, - STATE_SWLOAD, - STATE_QUERY, -}; -static enum bs11cfg_state bs11cfg_state = STATE_NONE; -static char *command, *value; -struct osmo_timer_list status_timer; - -static const uint8_t obj_li_attr[] = { - NM_ATT_BS11_BIT_ERR_THESH, 0x09, 0x00, - NM_ATT_BS11_L1_PROT_TYPE, 0x00, - NM_ATT_BS11_LINE_CFG, 0x00, -}; -static const uint8_t obj_bbsig0_attr[] = { - NM_ATT_BS11_RSSI_OFFS, 0x02, 0x00, 0x00, - NM_ATT_BS11_DIVERSITY, 0x01, 0x00, -}; -static const uint8_t obj_pa0_attr[] = { - NM_ATT_BS11_TXPWR, 0x01, BS11_TRX_POWER_GSM_30mW, -}; -static const char *trx1_password = "1111111111"; -#define TEI_OML 25 - -/* dummy function to keep gsm_data.c happy */ -struct osmo_counter *osmo_counter_alloc(const char *name) -{ - return NULL; -} - -int handle_serial_msg(struct msgb *rx_msg); - -/* create all objects for an initial configuration */ -static int create_objects(struct gsm_bts *bts) -{ - fprintf(stdout, "Crating Objects for minimal config\n"); - abis_nm_bs11_create_object(bts, BS11_OBJ_LI, 0, sizeof(obj_li_attr), - obj_li_attr); - abis_nm_bs11_create_object(bts, BS11_OBJ_GPSU, 0, 0, NULL); - abis_nm_bs11_create_object(bts, BS11_OBJ_ALCO, 0, 0, NULL); - abis_nm_bs11_create_object(bts, BS11_OBJ_CCLK, 0, 0, NULL); - abis_nm_bs11_create_object(bts, BS11_OBJ_BBSIG, 0, - sizeof(obj_bbsig0_attr), obj_bbsig0_attr); - abis_nm_bs11_create_object(bts, BS11_OBJ_PA, 0, - sizeof(obj_pa0_attr), obj_pa0_attr); - abis_nm_bs11_create_envaBTSE(bts, 0); - abis_nm_bs11_create_envaBTSE(bts, 1); - abis_nm_bs11_create_envaBTSE(bts, 2); - abis_nm_bs11_create_envaBTSE(bts, 3); - - abis_nm_bs11_conn_oml_tei(bts, 0, 1, 0xff, TEI_OML); - - abis_nm_bs11_set_trx_power(bts->c0, BS11_TRX_POWER_GSM_30mW); - - sleep(1); - - abis_nm_bs11_set_trx1_pw(bts, trx1_password); - - sleep(1); - - return 0; -} - -static int create_trx1(struct gsm_bts *bts) -{ - uint8_t bbsig1_attr[sizeof(obj_bbsig0_attr)+12]; - uint8_t *cur = bbsig1_attr; - struct gsm_bts_trx *trx = gsm_bts_trx_num(bts, 1); - - if (!trx) - trx = gsm_bts_trx_alloc(bts); - - fprintf(stdout, "Crating Objects for TRX1\n"); - - abis_nm_bs11_set_trx1_pw(bts, trx1_password); - - sleep(1); - - cur = tlv_put(cur, NM_ATT_BS11_PASSWORD, 10, - (uint8_t *)trx1_password); - memcpy(cur, obj_bbsig0_attr, sizeof(obj_bbsig0_attr)); - abis_nm_bs11_create_object(bts, BS11_OBJ_BBSIG, 1, - sizeof(bbsig1_attr), bbsig1_attr); - abis_nm_bs11_create_object(bts, BS11_OBJ_PA, 1, - sizeof(obj_pa0_attr), obj_pa0_attr); - abis_nm_bs11_set_trx_power(trx, BS11_TRX_POWER_GSM_30mW); - - return 0; -} - -static char *serial_port = "/dev/ttyUSB0"; -static char *fname_safety = "BTSBMC76.SWI"; -static char *fname_software = "HS011106.SWL"; -static int delay_ms = 0; -static int win_size = 8; -static int param_disconnect = 0; -static int param_restart = 0; -static int param_forced = 0; -static struct gsm_bts *g_bts; - -static int file_is_readable(const char *fname) -{ - int rc; - struct stat st; - - rc = stat(fname, &st); - if (rc < 0) - return 0; - - if (S_ISREG(st.st_mode) && (st.st_mode & S_IRUSR)) - return 1; - - return 0; -} - -static int percent; -static int percent_old; - -/* callback function passed to the ABIS OML code */ -static int swload_cbfn(unsigned int hook, unsigned int event, struct msgb *msg, - void *data, void *param) -{ - if (hook != GSM_HOOK_NM_SWLOAD) - return 0; - - switch (event) { - case NM_MT_LOAD_INIT_ACK: - fprintf(stdout, "Software Load Initiate ACK\n"); - break; - case NM_MT_LOAD_INIT_NACK: - fprintf(stderr, "ERROR: Software Load Initiate NACK\n"); - exit(5); - break; - case NM_MT_LOAD_END_ACK: - if (data) { - /* we did a safety load and must activate it */ - abis_nm_software_activate(g_bts, fname_safety, - swload_cbfn, g_bts); - sleep(5); - } - break; - case NM_MT_LOAD_END_NACK: - fprintf(stderr, "ERROR: Software Load End NACK\n"); - exit(3); - break; - case NM_MT_ACTIVATE_SW_NACK: - fprintf(stderr, "ERROR: Activate Software NACK\n"); - exit(4); - break; - case NM_MT_ACTIVATE_SW_ACK: - bs11cfg_state = STATE_NONE; - - break; - case NM_MT_LOAD_SEG_ACK: - percent = abis_nm_software_load_status(g_bts); - if (percent > percent_old) - printf("Software Download Progress: %d%%\n", percent); - percent_old = percent; - break; - } - return 0; -} - -static const struct value_string bs11_linkst_names[] = { - { 0, "Down" }, - { 1, "Up" }, - { 2, "Restoring" }, - { 0, NULL } -}; - -static const char *linkstate_name(uint8_t linkstate) -{ - return get_value_string(bs11_linkst_names, linkstate); -} - -static const struct value_string mbccu_load_names[] = { - { 0, "No Load" }, - { 1, "Load BTSCAC" }, - { 2, "Load BTSDRX" }, - { 3, "Load BTSBBX" }, - { 4, "Load BTSARC" }, - { 5, "Load" }, - { 0, NULL } -}; - -static const char *mbccu_load_name(uint8_t linkstate) -{ - return get_value_string(mbccu_load_names, linkstate); -} - -static const char *bts_phase_name(uint8_t phase) -{ - switch (phase) { - case BS11_STATE_WARM_UP: - case BS11_STATE_WARM_UP_2: - return "Warm Up"; - break; - case BS11_STATE_LOAD_SMU_SAFETY: - return "Load SMU Safety"; - break; - case BS11_STATE_LOAD_SMU_INTENDED: - return "Load SMU Intended"; - break; - case BS11_STATE_LOAD_MBCCU: - return "Load MBCCU"; - break; - case BS11_STATE_SOFTWARE_RQD: - return "Software required"; - break; - case BS11_STATE_WAIT_MIN_CFG: - case BS11_STATE_WAIT_MIN_CFG_2: - return "Wait minimal config"; - break; - case BS11_STATE_MAINTENANCE: - return "Maintenance"; - break; - case BS11_STATE_NORMAL: - return "Normal"; - break; - case BS11_STATE_ABIS_LOAD: - return "Abis load"; - break; - default: - return "Unknown"; - break; - } -} - -static const char *trx_power_name(uint8_t pwr) -{ - switch (pwr) { - case BS11_TRX_POWER_GSM_2W: - return "2W (GSM)"; - case BS11_TRX_POWER_GSM_250mW: - return "250mW (GSM)"; - case BS11_TRX_POWER_GSM_80mW: - return "80mW (GSM)"; - case BS11_TRX_POWER_GSM_30mW: - return "30mW (GSM)"; - case BS11_TRX_POWER_DCS_3W: - return "3W (DCS)"; - case BS11_TRX_POWER_DCS_1W6: - return "1.6W (DCS)"; - case BS11_TRX_POWER_DCS_500mW: - return "500mW (DCS)"; - case BS11_TRX_POWER_DCS_160mW: - return "160mW (DCS)"; - default: - return "unknown value"; - } -} - -static const char *pll_mode_name(uint8_t mode) -{ - switch (mode) { - case BS11_LI_PLL_LOCKED: - return "E1 Locked"; - case BS11_LI_PLL_STANDALONE: - return "Standalone"; - default: - return "unknown"; - } -} - -static const char *cclk_acc_name(uint8_t acc) -{ - switch (acc) { - case 0: - /* Out of the demanded +/- 0.05ppm */ - return "Medium"; - case 1: - /* Synchronized with Abis, within demanded tolerance +/- 0.05ppm */ - return "High"; - default: - return "unknown"; - } -} - -static const char *bport_lcfg_name(uint8_t lcfg) -{ - switch (lcfg) { - case BS11_LINE_CFG_STAR: - return "Star"; - case BS11_LINE_CFG_MULTIDROP: - return "Multi-Drop"; - default: - return "unknown"; - } -} - -static const char *obj_name(struct abis_om_fom_hdr *foh) -{ - static char retbuf[256]; - - retbuf[0] = 0; - - switch (foh->obj_class) { - case NM_OC_BS11: - strcat(retbuf, "BS11 "); - switch (foh->obj_inst.bts_nr) { - case BS11_OBJ_PA: - sprintf(retbuf+strlen(retbuf), "Power Amplifier %d ", - foh->obj_inst.ts_nr); - break; - case BS11_OBJ_LI: - sprintf(retbuf+strlen(retbuf), "Line Interface "); - break; - case BS11_OBJ_CCLK: - sprintf(retbuf+strlen(retbuf), "CCLK "); - break; - } - break; - case NM_OC_SITE_MANAGER: - strcat(retbuf, "SITE MANAGER "); - break; - case NM_OC_BS11_BPORT: - sprintf(retbuf+strlen(retbuf), "BPORT%u ", - foh->obj_inst.bts_nr); - break; - } - return retbuf; -} - -static void print_state(struct tlv_parsed *tp) -{ - if (TLVP_PRESENT(tp, NM_ATT_BS11_BTS_STATE)) { - uint8_t phase, mbccu; - if (TLVP_LEN(tp, NM_ATT_BS11_BTS_STATE) >= 1) { - phase = *TLVP_VAL(tp, NM_ATT_BS11_BTS_STATE); - printf("PHASE: %u %-20s ", phase & 0xf, - bts_phase_name(phase)); - } - if (TLVP_LEN(tp, NM_ATT_BS11_BTS_STATE) >= 2) { - mbccu = *(TLVP_VAL(tp, NM_ATT_BS11_BTS_STATE)+1); - printf("MBCCU0: %-11s MBCCU1: %-11s ", - mbccu_load_name(mbccu & 0xf), mbccu_load_name(mbccu >> 4)); - } - } - if (TLVP_PRESENT(tp, NM_ATT_BS11_E1_STATE) && - TLVP_LEN(tp, NM_ATT_BS11_E1_STATE) >= 1) { - uint8_t e1_state = *TLVP_VAL(tp, NM_ATT_BS11_E1_STATE); - printf("Abis-link: %-9s ", linkstate_name(e1_state & 0xf)); - } - printf("\n"); -} - -static int print_attr(struct tlv_parsed *tp) -{ - if (TLVP_PRESENT(tp, NM_ATT_BS11_ESN_PCB_SERIAL)) { - printf("\tBS-11 ESN PCB Serial Number: %s\n", - TLVP_VAL(tp, NM_ATT_BS11_ESN_PCB_SERIAL)); - } - if (TLVP_PRESENT(tp, NM_ATT_BS11_ESN_HW_CODE_NO)) { - printf("\tBS-11 ESN Hardware Code Number: %s\n", - TLVP_VAL(tp, NM_ATT_BS11_ESN_HW_CODE_NO)+6); - } - if (TLVP_PRESENT(tp, NM_ATT_BS11_ESN_FW_CODE_NO)) { - printf("\tBS-11 ESN Firmware Code Number: %s\n", - TLVP_VAL(tp, NM_ATT_BS11_ESN_FW_CODE_NO)+6); - } -#if 0 - if (TLVP_PRESENT(tp, NM_ATT_BS11_BOOT_SW_VERS)) { - printf("BS-11 Boot Software Version: %s\n", - TLVP_VAL(tp, NM_ATT_BS11_BOOT_SW_VERS)+6); - } -#endif - if (TLVP_PRESENT(tp, NM_ATT_ABIS_CHANNEL) && - TLVP_LEN(tp, NM_ATT_ABIS_CHANNEL) >= 3) { - const uint8_t *chan = TLVP_VAL(tp, NM_ATT_ABIS_CHANNEL); - printf("\tE1 Channel: Port=%u Timeslot=%u ", - chan[0], chan[1]); - if (chan[2] == 0xff) - printf("(Full Slot)\n"); - else - printf("Subslot=%u\n", chan[2]); - } - if (TLVP_PRESENT(tp, NM_ATT_TEI)) - printf("\tTEI: %d\n", *TLVP_VAL(tp, NM_ATT_TEI)); - if (TLVP_PRESENT(tp, NM_ATT_BS11_TXPWR) && - TLVP_LEN(tp, NM_ATT_BS11_TXPWR) >= 1) { - printf("\tTRX Power: %s\n", - trx_power_name(*TLVP_VAL(tp, NM_ATT_BS11_TXPWR))); - } - if (TLVP_PRESENT(tp, NM_ATT_BS11_PLL_MODE) && - TLVP_LEN(tp, NM_ATT_BS11_PLL_MODE) >= 1) { - printf("\tPLL Mode: %s\n", - pll_mode_name(*TLVP_VAL(tp, NM_ATT_BS11_PLL_MODE))); - } - if (TLVP_PRESENT(tp, NM_ATT_BS11_PLL) && - TLVP_LEN(tp, NM_ATT_BS11_PLL) >= 4) { - const uint8_t *vp = TLVP_VAL(tp, NM_ATT_BS11_PLL); - printf("\tPLL Set Value=%d, Work Value=%d\n", - vp[0] << 8 | vp[1], vp[2] << 8 | vp[3]); - } - if (TLVP_PRESENT(tp, NM_ATT_BS11_CCLK_ACCURACY) && - TLVP_LEN(tp, NM_ATT_BS11_CCLK_ACCURACY) >= 1) { - const uint8_t *acc = TLVP_VAL(tp, NM_ATT_BS11_CCLK_ACCURACY); - printf("\tCCLK Accuracy: %s (%d)\n", cclk_acc_name(*acc), *acc); - } - if (TLVP_PRESENT(tp, NM_ATT_BS11_CCLK_TYPE) && - TLVP_LEN(tp, NM_ATT_BS11_CCLK_TYPE) >= 1) { - const uint8_t *acc = TLVP_VAL(tp, NM_ATT_BS11_CCLK_TYPE); - printf("\tCCLK Type=%d\n", *acc); - } - if (TLVP_PRESENT(tp, NM_ATT_BS11_LINE_CFG) && - TLVP_LEN(tp, NM_ATT_BS11_LINE_CFG) >= 1) { - const uint8_t *lcfg = TLVP_VAL(tp, NM_ATT_BS11_LINE_CFG); - printf("\tLine Configuration: %s (%d)\n", - bport_lcfg_name(*lcfg), *lcfg); - } - - - - return 0; -} - -static void cmd_query(void) -{ - struct gsm_bts_trx *trx = g_bts->c0; - - bs11cfg_state = STATE_QUERY; - abis_nm_bs11_get_serno(g_bts); - abis_nm_bs11_get_oml_tei_ts(g_bts); - abis_nm_bs11_get_pll_mode(g_bts); - abis_nm_bs11_get_cclk(g_bts); - abis_nm_bs11_get_trx_power(trx); - trx = gsm_bts_trx_num(g_bts, 1); - if (trx) - abis_nm_bs11_get_trx_power(trx); - abis_nm_bs11_get_bport_line_cfg(g_bts, 0); - abis_nm_bs11_get_bport_line_cfg(g_bts, 1); - sleep(1); - abis_nm_bs11_factory_logon(g_bts, 0); - command = NULL; -} - -/* handle a response from the BTS to a GET STATE command */ -static int handle_state_resp(enum abis_bs11_phase state) -{ - int rc = 0; - - switch (state) { - case BS11_STATE_WARM_UP: - case BS11_STATE_LOAD_SMU_SAFETY: - case BS11_STATE_LOAD_SMU_INTENDED: - case BS11_STATE_LOAD_MBCCU: - break; - case BS11_STATE_SOFTWARE_RQD: - bs11cfg_state = STATE_SWLOAD; - /* send safety load. Use g_bts as private 'param' - * argument, so our swload_cbfn can distinguish - * a safety load from a regular software */ - if (file_is_readable(fname_safety)) - rc = abis_nm_software_load(g_bts, 0xff, fname_safety, - win_size, param_forced, - swload_cbfn, g_bts); - else - fprintf(stderr, "No valid Safety Load file \"%s\"\n", - fname_safety); - break; - case BS11_STATE_WAIT_MIN_CFG: - case BS11_STATE_WAIT_MIN_CFG_2: - bs11cfg_state = STATE_SWLOAD; - rc = create_objects(g_bts); - break; - case BS11_STATE_MAINTENANCE: - if (command) { - if (!strcmp(command, "disconnect")) - abis_nm_bs11_factory_logon(g_bts, 0); - else if (!strcmp(command, "reconnect")) - rc = abis_nm_bs11_bsc_disconnect(g_bts, 1); - else if (!strcmp(command, "software") - && bs11cfg_state != STATE_SWLOAD) { - bs11cfg_state = STATE_SWLOAD; - /* send software (FIXME: over A-bis?) */ - if (file_is_readable(fname_software)) - rc = abis_nm_bs11_load_swl(g_bts, fname_software, - win_size, param_forced, - swload_cbfn); - else - fprintf(stderr, "No valid Software file \"%s\"\n", - fname_software); - } else if (!strcmp(command, "delete-trx1")) { - printf("Locing BBSIG and PA objects of TRX1\n"); - abis_nm_chg_adm_state(g_bts, NM_OC_BS11, - BS11_OBJ_BBSIG, 0, 1, - NM_STATE_LOCKED); - abis_nm_chg_adm_state(g_bts, NM_OC_BS11, - BS11_OBJ_PA, 0, 1, - NM_STATE_LOCKED); - sleep(1); - printf("Deleting BBSIG and PA objects of TRX1\n"); - abis_nm_bs11_delete_object(g_bts, BS11_OBJ_BBSIG, 1); - abis_nm_bs11_delete_object(g_bts, BS11_OBJ_PA, 1); - sleep(1); - abis_nm_bs11_factory_logon(g_bts, 0); - command = NULL; - } else if (!strcmp(command, "create-trx1")) { - create_trx1(g_bts); - sleep(1); - abis_nm_bs11_factory_logon(g_bts, 0); - command = NULL; - } else if (!strcmp(command, "pll-e1-locked")) { - abis_nm_bs11_set_pll_locked(g_bts, 1); - sleep(1); - abis_nm_bs11_factory_logon(g_bts, 0); - command = NULL; - } else if (!strcmp(command, "pll-standalone")) { - abis_nm_bs11_set_pll_locked(g_bts, 0); - sleep(1); - abis_nm_bs11_factory_logon(g_bts, 0); - command = NULL; - } else if (!strcmp(command, "pll-setvalue")) { - abis_nm_bs11_set_pll(g_bts, atoi(value)); - sleep(1); - abis_nm_bs11_factory_logon(g_bts, 0); - command = NULL; - } else if (!strcmp(command, "pll-workvalue")) { - /* To set the work value we need to login as FIELD */ - abis_nm_bs11_factory_logon(g_bts, 0); - sleep(1); - abis_nm_bs11_infield_logon(g_bts, 1); - sleep(1); - abis_nm_bs11_set_pll(g_bts, atoi(value)); - sleep(1); - abis_nm_bs11_infield_logon(g_bts, 0); - command = NULL; - } else if (!strcmp(command, "oml-tei")) { - abis_nm_bs11_conn_oml_tei(g_bts, 0, 1, 0xff, TEI_OML); - command = NULL; - } else if (!strcmp(command, "restart")) { - abis_nm_bs11_restart(g_bts); - command = NULL; - } else if (!strcmp(command, "query")) { - cmd_query(); - } else if (!strcmp(command, "create-bport1")) { - abis_nm_bs11_create_bport(g_bts, 1); - sleep(1); - abis_nm_bs11_factory_logon(g_bts, 0); - command = NULL; - } else if (!strcmp(command, "delete-bport1")) { - abis_nm_chg_adm_state(g_bts, NM_OC_BS11_BPORT, 1, 0xff, 0xff, NM_STATE_LOCKED); - sleep(1); - abis_nm_bs11_delete_bport(g_bts, 1); - sleep(1); - abis_nm_bs11_factory_logon(g_bts, 0); - command = NULL; - } else if (!strcmp(command, "bport0-star")) { - abis_nm_bs11_set_bport_line_cfg(g_bts, 0, BS11_LINE_CFG_STAR); - sleep(1); - abis_nm_bs11_factory_logon(g_bts, 0); - command = NULL; - } else if (!strcmp(command, "bport0-multidrop")) { - abis_nm_bs11_set_bport_line_cfg(g_bts, 0, BS11_LINE_CFG_MULTIDROP); - sleep(1); - abis_nm_bs11_factory_logon(g_bts, 0); - command = NULL; - } else if (!strcmp(command, "bport1-multidrop")) { - abis_nm_bs11_set_bport_line_cfg(g_bts, 1, BS11_LINE_CFG_MULTIDROP); - sleep(1); - abis_nm_bs11_factory_logon(g_bts, 0); - command = NULL; - } - - } - break; - case BS11_STATE_NORMAL: - if (command) { - if (!strcmp(command, "reconnect")) - abis_nm_bs11_factory_logon(g_bts, 0); - else if (!strcmp(command, "disconnect")) - abis_nm_bs11_bsc_disconnect(g_bts, 0); - else if (!strcmp(command, "query")) { - cmd_query(); - } - } else if (param_disconnect) { - param_disconnect = 0; - abis_nm_bs11_bsc_disconnect(g_bts, 0); - if (param_restart) { - param_restart = 0; - abis_nm_bs11_restart(g_bts); - } - } - break; - default: - break; - } - return rc; -} - -/* handle a fully-received message/packet from the RS232 port */ -static int abis_nm_bs11cfg_rcvmsg(struct msgb *rx_msg) -{ - struct e1inp_sign_link *link = rx_msg->dst; - struct abis_om_hdr *oh; - struct abis_om_fom_hdr *foh; - struct tlv_parsed tp; - int rc = -1; - -#if 0 - const uint8_t too_fast[] = { 0x12, 0x80, 0x00, 0x00, 0x02, 0x02 }; - - if (rx_msg->len < LAPD_HDR_LEN - + sizeof(struct abis_om_fom_hdr) - + sizeof(struct abis_om_hdr)) { - if (!memcmp(rx_msg->data + 2, too_fast, - sizeof(too_fast))) { - fprintf(stderr, "BS11 tells us we're too " - "fast, try --delay bigger than %u\n", - delay_ms); - return -E2BIG; - } else - fprintf(stderr, "unknown BS11 message\n"); - } -#endif - - oh = (struct abis_om_hdr *) msgb_l2(rx_msg); - foh = (struct abis_om_fom_hdr *) oh->data; - switch (foh->msg_type) { - case NM_MT_BS11_LMT_LOGON_ACK: - printf("LMT LOGON: ACK\n\n"); - if (bs11cfg_state == STATE_NONE) - bs11cfg_state = STATE_LOGON_ACK; - rc = abis_nm_bs11_get_state(g_bts); - break; - case NM_MT_BS11_LMT_LOGOFF_ACK: - printf("LMT LOGOFF: ACK\n"); - exit(0); - break; - case NM_MT_BS11_GET_STATE_ACK: - rc = abis_nm_tlv_parse(&tp, g_bts, foh->data, oh->length-sizeof(*foh)); - print_state(&tp); - if (TLVP_PRESENT(&tp, NM_ATT_BS11_BTS_STATE) && - TLVP_LEN(&tp, NM_ATT_BS11_BTS_STATE) >= 1) - rc = handle_state_resp(*TLVP_VAL(&tp, NM_ATT_BS11_BTS_STATE)); - break; - case NM_MT_GET_ATTR_RESP: - printf("\n%sATTRIBUTES:\n", obj_name(foh)); - abis_nm_tlv_parse(&tp, g_bts, foh->data, oh->length-sizeof(*foh)); - rc = print_attr(&tp); - //osmo_hexdump(foh->data, oh->length-sizeof(*foh)); - break; - case NM_MT_BS11_SET_ATTR_ACK: - printf("SET ATTRIBUTE ObjClass=0x%02x ObjInst=(%d,%d,%d) ACK\n", - foh->obj_class, foh->obj_inst.bts_nr, - foh->obj_inst.trx_nr, foh->obj_inst.ts_nr); - rc = 0; - break; - case NM_MT_BS11_SET_ATTR_NACK: - printf("SET ATTRIBUTE ObjClass=0x%02x ObjInst=(%d,%d,%d) NACK\n", - foh->obj_class, foh->obj_inst.bts_nr, - foh->obj_inst.trx_nr, foh->obj_inst.ts_nr); - break; - case NM_MT_GET_ATTR_NACK: - printf("\n%sGET ATTR NACK\n", obj_name(foh)); - break; - case NM_MT_BS11_CREATE_OBJ_ACK: - printf("\n%sCREATE OBJECT ACK\n", obj_name(foh)); - break; - case NM_MT_BS11_CREATE_OBJ_NACK: - printf("\n%sCREATE OBJECT NACK\n", obj_name(foh)); - break; - case NM_MT_BS11_DELETE_OBJ_ACK: - printf("\n%sDELETE OBJECT ACK\n", obj_name(foh)); - break; - case NM_MT_BS11_DELETE_OBJ_NACK: - printf("\n%sDELETE OBJECT NACK\n", obj_name(foh)); - break; - default: - rc = abis_nm_rcvmsg(rx_msg); - } - if (rc < 0) { - perror("ERROR in main loop"); - //break; - } - /* flush the queue of pending messages to be sent. */ - abis_nm_queue_send_next(link->trx->bts); - if (rc == 1) - return rc; - - switch (bs11cfg_state) { - case STATE_NONE: - abis_nm_bs11_factory_logon(g_bts, 1); - break; - case STATE_LOGON_ACK: - osmo_timer_schedule(&status_timer, 5, 0); - break; - default: - break; - } - - return rc; -} - -void status_timer_cb(void *data) -{ - abis_nm_bs11_get_state(g_bts); -} - -static void print_banner(void) -{ - printf("bs11_config (C) 2009-2010 by Harald Welte and Dieter Spaar\n"); - printf("This is FREE SOFTWARE with ABSOLUTELY NO WARRANTY\n\n"); -} - -static void print_help(void) -{ - printf("bs11_config [options] [command]\n"); - printf("\nSupported options:\n"); - printf("\t-h --help\t\t\tPrint this help text\n"); - printf("\t-p --port </dev/ttyXXX>\t\tSpecify serial port\n"); - printf("\t-s --software <file>\t\tSpecify Software file\n"); - printf("\t-S --safety <file>\t\tSpecify Safety Load file\n"); - printf("\t-d --delay <ms>\t\t\tSpecify delay in milliseconds\n"); - printf("\t-D --disconnect\t\t\tDisconnect BTS from BSC\n"); - printf("\t-w --win-size <num>\t\tSpecify Window Size\n"); - printf("\t-f --forced\t\t\tForce Software Load\n"); - printf("\nSupported commands:\n"); - printf("\tquery\t\t\tQuery the BS-11 about serial number and configuration\n"); - printf("\tdisconnect\t\tDisconnect A-bis link (go into administrative state)\n"); - printf("\tresconnect\t\tReconnect A-bis link (go into normal state)\n"); - printf("\trestart\t\t\tRestart the BTS\n"); - printf("\tsoftware\t\tDownload Software (only in administrative state)\n"); - printf("\tcreate-trx1\t\tCreate objects for TRX1 (Danger: Your BS-11 might overheat)\n"); - printf("\tdelete-trx1\t\tDelete objects for TRX1\n"); - printf("\tpll-e1-locked\t\tSet the PLL to be locked to E1 clock\n"); - printf("\tpll-standalone\t\tSet the PLL to be in standalone mode\n"); - printf("\tpll-setvalue <value>\tSet the PLL set value\n"); - printf("\tpll-workvalue <value>\tSet the PLL work value\n"); - printf("\toml-tei\t\t\tSet OML E1 TS and TEI\n"); - printf("\tbport0-star\t\tSet BPORT0 line config to star\n"); - printf("\tbport0-multidrop\tSet BPORT0 line config to multidrop\n"); - printf("\tbport1-multidrop\tSet BPORT1 line config to multidrop\n"); - printf("\tcreate-bport1\t\tCreate BPORT1 object\n"); - printf("\tdelete-bport1\t\tDelete BPORT1 object\n"); -} - -static void handle_options(int argc, char **argv) -{ - int option_index = 0; - print_banner(); - - while (1) { - int c; - static struct option long_options[] = { - { "help", 0, 0, 'h' }, - { "port", 1, 0, 'p' }, - { "software", 1, 0, 's' }, - { "safety", 1, 0, 'S' }, - { "delay", 1, 0, 'd' }, - { "disconnect", 0, 0, 'D' }, - { "win-size", 1, 0, 'w' }, - { "forced", 0, 0, 'f' }, - { "restart", 0, 0, 'r' }, - { "debug", 1, 0, 'b'}, - }; - - c = getopt_long(argc, argv, "hp:s:S:td:Dw:fra:", - long_options, &option_index); - - if (c == -1) - break; - - switch (c) { - case 'h': - print_help(); - exit(0); - case 'p': - serial_port = optarg; - break; - case 'b': - log_parse_category_mask(osmo_stderr_target, optarg); - break; - case 's': - fname_software = optarg; - break; - case 'S': - fname_safety = optarg; - break; - case 'd': - delay_ms = atoi(optarg); - break; - case 'w': - win_size = atoi(optarg); - break; - case 'D': - param_disconnect = 1; - break; - case 'f': - param_forced = 1; - break; - case 'r': - param_disconnect = 1; - param_restart = 1; - break; - default: - break; - } - } - if (optind < argc) { - command = argv[optind]; - if (optind+1 < argc) - value = argv[optind+1]; - } - -} - -static int num_sigint; - -static void signal_handler(int signal) -{ - fprintf(stdout, "\nsignal %u received\n", signal); - - switch (signal) { - case SIGINT: - num_sigint++; - abis_nm_bs11_factory_logon(g_bts, 0); - if (num_sigint >= 3) - exit(0); - break; - } -} - -static int bs11cfg_sign_link(struct msgb *msg) -{ - msg->dst = oml_link; - return abis_nm_bs11cfg_rcvmsg(msg); -} - -struct e1inp_line_ops bs11cfg_e1inp_line_ops = { - .sign_link = bs11cfg_sign_link, -}; - -extern int bts_model_bs11_init(void); -int main(int argc, char **argv) -{ - struct gsm_network *gsmnet; - struct e1inp_line *line; - - tall_bs11cfg_ctx = talloc_named_const(NULL, 0, "bs11-config"); - msgb_talloc_ctx_init(tall_bs11cfg_ctx, 0); - - osmo_init_logging(&log_info); - handle_options(argc, argv); - bts_model_bs11_init(); - - gsmnet = bsc_network_init(tall_bs11cfg_ctx, 1, 1, NULL); - if (!gsmnet) { - fprintf(stderr, "Unable to allocate gsm network\n"); - exit(1); - } - g_bts = gsm_bts_alloc_register(gsmnet, GSM_BTS_TYPE_BS11, - HARDCODED_BSIC); - - /* Override existing OML callback handler to set our own. */ - g_bts->model->oml_rcvmsg = abis_nm_bs11cfg_rcvmsg; - - libosmo_abis_init(tall_bs11cfg_ctx); - - /* Initialize virtual E1 line over rs232. */ - line = talloc_zero(tall_bs11cfg_ctx, struct e1inp_line); - if (!line) { - fprintf(stderr, "Unable to allocate memory for virtual E1 line\n"); - exit(1); - } - /* set the serial port. */ - bs11cfg_e1inp_line_ops.cfg.rs232.port = serial_port; - bs11cfg_e1inp_line_ops.cfg.rs232.delay = delay_ms; - - line->driver = e1inp_driver_find("rs232"); - if (!line->driver) { - fprintf(stderr, "cannot find `rs232' driver, giving up.\n"); - exit(1); - } - e1inp_line_bind_ops(line, &bs11cfg_e1inp_line_ops); - - /* configure and create signalling link for OML. */ - e1inp_ts_config_sign(&line->ts[0], line); - g_bts->oml_link = oml_link = - e1inp_sign_link_create(&line->ts[0], E1INP_SIGN_OML, - g_bts->c0, TEI_OML, 0); - - e1inp_line_update(line); - - signal(SIGINT, &signal_handler); - - abis_nm_bs11_factory_logon(g_bts, 1); - //abis_nm_bs11_get_serno(g_bts); - - osmo_timer_setup(&status_timer, status_timer_cb, NULL); - - while (1) { - if (osmo_select_main(0) < 0) - break; - } - - abis_nm_bs11_factory_logon(g_bts, 0); - - exit(0); -} |